diff options
| author | Stefano Babic <sbabic@denx.de> | 2015-02-13 11:17:01 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2015-02-13 11:17:01 +0100 |
| commit | e72d344386bf80738fab7a6bd37cb321f443093a (patch) | |
| tree | d3e02055e6aa903ab80ef87c78d2f38e93981dcf /include | |
| parent | 258c98f8d36ef35d7cb7604847ba73e64d702c2a (diff) | |
| parent | bd2a4888b123713adec271d6c8040ca9f609aa2f (diff) | |
| download | u-boot-imx-e72d344386bf80738fab7a6bd37cb321f443093a.zip u-boot-imx-e72d344386bf80738fab7a6bd37cb321f443093a.tar.gz u-boot-imx-e72d344386bf80738fab7a6bd37cb321f443093a.tar.bz2 | |
Merge branch 'master' of git://git.denx.de/u-boot
Diffstat (limited to 'include')
130 files changed, 3110 insertions, 8057 deletions
diff --git a/include/_exports.h b/include/_exports.h index 349a3c5..5944703 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -1,32 +1,73 @@ /* - * You do not need to use #ifdef around functions that may not exist + * You need to use #ifdef around functions that may not exist * in the final configuration (such as i2c). + * use a dummyfunction as first parameter to EXPORT_FUNC. + * As an example see the CONFIG_CMD_I2C section below */ -EXPORT_FUNC(get_version) -EXPORT_FUNC(getc) -EXPORT_FUNC(tstc) -EXPORT_FUNC(putc) -EXPORT_FUNC(puts) -EXPORT_FUNC(printf) -EXPORT_FUNC(install_hdlr) -EXPORT_FUNC(free_hdlr) -EXPORT_FUNC(malloc) -EXPORT_FUNC(free) -EXPORT_FUNC(udelay) -EXPORT_FUNC(get_timer) -EXPORT_FUNC(vprintf) -EXPORT_FUNC(do_reset) -EXPORT_FUNC(getenv) -EXPORT_FUNC(setenv) -EXPORT_FUNC(simple_strtoul) -EXPORT_FUNC(strict_strtoul) -EXPORT_FUNC(simple_strtol) -EXPORT_FUNC(strcmp) -EXPORT_FUNC(i2c_write) -EXPORT_FUNC(i2c_read) -EXPORT_FUNC(spi_init) -EXPORT_FUNC(spi_setup_slave) -EXPORT_FUNC(spi_free_slave) -EXPORT_FUNC(spi_claim_bus) -EXPORT_FUNC(spi_release_bus) -EXPORT_FUNC(spi_xfer) +#ifndef EXPORT_FUNC +#define EXPORT_FUNC(a, b, c, ...) +#endif + EXPORT_FUNC(get_version, unsigned long, get_version, void) + EXPORT_FUNC(getc, int, getc, void) + EXPORT_FUNC(tstc, int, tstc, void) + EXPORT_FUNC(putc, void, putc, const char) + EXPORT_FUNC(puts, void, puts, const char *) + EXPORT_FUNC(printf, int, printf, const char*, ...) +#if defined(CONFIG_X86) || defined(CONFIG_PPC) + EXPORT_FUNC(irq_install_handler, void, install_hdlr, + int, interrupt_handler_t, void*) + + EXPORT_FUNC(irq_free_handler, void, free_hdlr, int) +#else + EXPORT_FUNC(dummy, void, install_hdlr, void) + EXPORT_FUNC(dummy, void, free_hdlr, void) +#endif + EXPORT_FUNC(malloc, void *, malloc, size_t) + EXPORT_FUNC(free, void, free, void *) + EXPORT_FUNC(udelay, void, udelay, unsigned long) + EXPORT_FUNC(get_timer, unsigned long, get_timer, unsigned long) + EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list) + EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *, + int , int , char * const []) + EXPORT_FUNC(getenv, char *, getenv, const char*) + EXPORT_FUNC(setenv, int, setenv, const char *, const char *) + EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul, + const char *, char **, unsigned int) + EXPORT_FUNC(strict_strtoul, int, strict_strtoul, + const char *, unsigned int , unsigned long *) + EXPORT_FUNC(simple_strtol, long, simple_strtol, + const char *, char **, unsigned int) + EXPORT_FUNC(strcmp, int, strcmp, const char *cs, const char *ct) +#if defined(CONFIG_CMD_I2C) && \ + (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT)) + EXPORT_FUNC(i2c_write, int, i2c_write, uchar, uint, int , uchar * , int) + EXPORT_FUNC(i2c_read, int, i2c_read, uchar, uint, int , uchar * , int) +#else + EXPORT_FUNC(dummy, void, i2c_write, void) + EXPORT_FUNC(dummy, void, i2c_read, void) +#endif + +#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI) + EXPORT_FUNC(dummy, void, spi_init, void) + EXPORT_FUNC(dummy, void, spi_setup_slave, void) + EXPORT_FUNC(dummy, void, spi_free_slave, void) +#else + EXPORT_FUNC(spi_init, void, spi_init, void) + EXPORT_FUNC(spi_setup_slave, struct spi_slave *, spi_setup_slave, + unsigned int, unsigned int, unsigned int, unsigned int) + EXPORT_FUNC(spi_free_slave, void, spi_free_slave, struct spi_slave *) +#endif +#ifndef CONFIG_CMD_SPI + EXPORT_FUNC(dummy, void, spi_claim_bus, void) + EXPORT_FUNC(dummy, void, spi_release_bus, void) + EXPORT_FUNC(dummy, void, spi_xfer, void) +#else + EXPORT_FUNC(spi_claim_bus, int, spi_claim_bus, struct spi_slave *) + EXPORT_FUNC(spi_release_bus, void, spi_release_bus, struct spi_slave *) + EXPORT_FUNC(spi_xfer, int, spi_xfer, struct spi_slave *, + unsigned int, const void *, void *, unsigned long) +#endif + EXPORT_FUNC(ustrtoul, unsigned long, ustrtoul, + const char *, char **, unsigned int) + EXPORT_FUNC(ustrtoull, unsigned long long, ustrtoull, + const char *, char **, unsigned int) diff --git a/include/asm-generic/atomic-long.h b/include/asm-generic/atomic-long.h new file mode 100644 index 0000000..d0469ef --- /dev/null +++ b/include/asm-generic/atomic-long.h @@ -0,0 +1,260 @@ +#ifndef _ASM_GENERIC_ATOMIC_LONG_H +#define _ASM_GENERIC_ATOMIC_LONG_H +/* + * Copyright (C) 2005 Silicon Graphics, Inc. + * Christoph Lameter + * + * Allows to provide arch independent atomic definitions without the need to + * edit all arch specific atomic.h files. + */ + +#include <asm/types.h> + +/* + * Suppport for atomic_long_t + * + * Casts for parameters are avoided for existing atomic functions in order to + * avoid issues with cast-as-lval under gcc 4.x and other limitations that the + * macros of a platform may have. + */ + +#if BITS_PER_LONG == 64 + +typedef atomic64_t atomic_long_t; + +#define ATOMIC_LONG_INIT(i) ATOMIC64_INIT(i) + +static inline long atomic_long_read(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_read(v); +} + +static inline void atomic_long_set(atomic_long_t *l, long i) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_set(v, i); +} + +static inline void atomic_long_inc(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_inc(v); +} + +static inline void atomic_long_dec(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_dec(v); +} + +static inline void atomic_long_add(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_add(i, v); +} + +static inline void atomic_long_sub(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + atomic64_sub(i, v); +} + +static inline int atomic_long_sub_and_test(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_sub_and_test(i, v); +} + +static inline int atomic_long_dec_and_test(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_dec_and_test(v); +} + +static inline int atomic_long_inc_and_test(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_inc_and_test(v); +} + +static inline int atomic_long_add_negative(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return atomic64_add_negative(i, v); +} + +static inline long atomic_long_add_return(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_add_return(i, v); +} + +static inline long atomic_long_sub_return(long i, atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_sub_return(i, v); +} + +static inline long atomic_long_inc_return(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_inc_return(v); +} + +static inline long atomic_long_dec_return(atomic_long_t *l) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_dec_return(v); +} + +static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) +{ + atomic64_t *v = (atomic64_t *)l; + + return (long)atomic64_add_unless(v, a, u); +} + +#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l)) + +#define atomic_long_cmpxchg(l, old, new) \ + (atomic64_cmpxchg((atomic64_t *)(l), (old), (new))) +#define atomic_long_xchg(v, new) \ + (atomic64_xchg((atomic64_t *)(v), (new))) + +#else /* BITS_PER_LONG == 64 */ + +typedef atomic_t atomic_long_t; + +#define ATOMIC_LONG_INIT(i) ATOMIC_INIT(i) +static inline long atomic_long_read(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_read(v); +} + +static inline void atomic_long_set(atomic_long_t *l, long i) +{ + atomic_t *v = (atomic_t *)l; + + atomic_set(v, i); +} + +static inline void atomic_long_inc(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_inc(v); +} + +static inline void atomic_long_dec(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_dec(v); +} + +static inline void atomic_long_add(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_add(i, v); +} + +static inline void atomic_long_sub(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + atomic_sub(i, v); +} + +#ifndef __UBOOT__ +static inline int atomic_long_sub_and_test(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_sub_and_test(i, v); +} + +static inline int atomic_long_dec_and_test(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_dec_and_test(v); +} + +static inline int atomic_long_inc_and_test(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_inc_and_test(v); +} + +static inline int atomic_long_add_negative(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return atomic_add_negative(i, v); +} + +static inline long atomic_long_add_return(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_add_return(i, v); +} + +static inline long atomic_long_sub_return(long i, atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_sub_return(i, v); +} + +static inline long atomic_long_inc_return(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_inc_return(v); +} + +static inline long atomic_long_dec_return(atomic_long_t *l) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_dec_return(v); +} + +static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u) +{ + atomic_t *v = (atomic_t *)l; + + return (long)atomic_add_unless(v, a, u); +} + +#define atomic_long_inc_not_zero(l) atomic_inc_not_zero((atomic_t *)(l)) + +#define atomic_long_cmpxchg(l, old, new) \ + (atomic_cmpxchg((atomic_t *)(l), (old), (new))) +#define atomic_long_xchg(v, new) \ + (atomic_xchg((atomic_t *)(v), (new))) +#endif /* __UBOOT__ */ + +#endif /* BITS_PER_LONG == 64 */ + +#endif /* _ASM_GENERIC_ATOMIC_LONG_H */ diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 3d14d5f..6747619 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -73,7 +73,7 @@ typedef struct global_data { const void *fdt_blob; /* Our device tree, NULL if none */ void *new_fdt; /* Relocated FDT */ unsigned long fdt_size; /* Space reserved for relocated FDT */ - void **jt; /* jump table */ + struct jt_funcs *jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ #ifdef CONFIG_TRACE void *trace_buff; /* The trace buffer */ diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 36a36c6..3b96b82 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -10,6 +10,15 @@ /* * Generic GPIO API for U-Boot * + * -- + * NB: This is deprecated. Please use the driver model functions instead: + * + * - gpio_request_by_name() + * - dm_gpio_get_value() etc. + * + * For now we need a dm_ prefix on some functions to avoid name collision. + * -- + * * GPIOs are numbered from 0 to GPIO_COUNT-1 which value is defined * by the SOC/architecture. * @@ -26,6 +35,7 @@ */ /** + * @deprecated Please use driver model instead * Request a GPIO. This should be called before any of the other functions * are used on this GPIO. * @@ -39,6 +49,7 @@ int gpio_request(unsigned gpio, const char *label); /** + * @deprecated Please use driver model instead * Stop using the GPIO. This function should not alter pin configuration. * * @param gpio GPIO number @@ -47,6 +58,7 @@ int gpio_request(unsigned gpio, const char *label); int gpio_free(unsigned gpio); /** + * @deprecated Please use driver model instead * Make a GPIO an input. * * @param gpio GPIO number @@ -55,6 +67,7 @@ int gpio_free(unsigned gpio); int gpio_direction_input(unsigned gpio); /** + * @deprecated Please use driver model instead * Make a GPIO an output, and set its value. * * @param gpio GPIO number @@ -64,6 +77,7 @@ int gpio_direction_input(unsigned gpio); int gpio_direction_output(unsigned gpio, int value); /** + * @deprecated Please use driver model instead * Get a GPIO's value. This will work whether the GPIO is an input * or an output. * @@ -73,6 +87,7 @@ int gpio_direction_output(unsigned gpio, int value); int gpio_get_value(unsigned gpio); /** + * @deprecated Please use driver model instead * Set an output GPIO's value. The GPIO must already be an output or * this function may have no effect. * @@ -95,6 +110,34 @@ enum gpio_func_t { struct udevice; +struct gpio_desc { + struct udevice *dev; /* Device, NULL for invalid GPIO */ + unsigned long flags; +#define GPIOD_REQUESTED (1 << 0) /* Requested/claimed */ +#define GPIOD_IS_OUT (1 << 1) /* GPIO is an output */ +#define GPIOD_IS_IN (1 << 2) /* GPIO is an output */ +#define GPIOD_ACTIVE_LOW (1 << 3) /* value has active low */ +#define GPIOD_IS_OUT_ACTIVE (1 << 4) /* set output active */ + + uint offset; /* GPIO offset within the device */ + /* + * We could consider adding the GPIO label in here. Possibly we could + * use this structure for internal GPIO information. + */ +}; + +/** + * dm_gpio_is_valid() - Check if a GPIO is gpio_is_valie + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return true if valid, false if not + */ +static inline bool dm_gpio_is_valid(struct gpio_desc *desc) +{ + return desc->dev != NULL; +} + /** * gpio_get_status() - get the current GPIO status as a string * @@ -106,6 +149,8 @@ struct udevice; * which means this is GPIO bank b, offset 4, currently set to input, current * value 1, [x] means that it is requested and the owner is 'sdmmc_cd' * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @buf: Place to put string @@ -118,6 +163,8 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize); * * Note this returns GPIOF_UNUSED if the GPIO is not requested. * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the nane given when the GPIO @@ -135,6 +182,8 @@ int gpio_get_function(struct udevice *dev, int offset, const char **namep); * Note this does not return GPIOF_UNUSED - it will always return the GPIO * driver's view of a pin function, even if it is not correctly set up. * + * TODO(sjg@chromium.org): This should use struct gpio_desc + * * @dev: Device to check * @offset: Offset of device GPIO to check * @namep: If non-NULL, this is set to the nane given when the GPIO @@ -155,6 +204,8 @@ int gpio_get_raw_function(struct udevice *dev, int offset, const char **namep); int gpio_requestf(unsigned gpio, const char *fmt, ...) __attribute__ ((format (__printf__, 2, 3))); +struct fdtdec_phandle_args; + /** * struct struct dm_gpio_ops - Driver model GPIO operations * @@ -198,6 +249,33 @@ struct dm_gpio_ops { * @return current function - GPIOF_... */ int (*get_function)(struct udevice *dev, unsigned offset); + + /** + * xlate() - Translate phandle arguments into a GPIO description + * + * This function should set up the fields in desc according to the + * information in the arguments. The uclass will have set up: + * + * @desc->dev to @dev + * @desc->flags to 0 + * @desc->offset to the value of the first argument in args, if any, + * otherwise -1 (which is invalid) + * + * This method is optional so if the above defaults suit it can be + * omitted. Typical behaviour is to set up the GPIOD_ACTIVE_LOW flag + * in desc->flags. + * + * Note that @dev is passed in as a parameter to follow driver model + * uclass conventions, even though it is already available as + * desc->dev. + * + * @dev: GPIO device + * @desc: Place to put GPIO description + * @args: Arguments provided in descripion + * @return 0 if OK, -ve on error + */ + int (*xlate)(struct udevice *dev, struct gpio_desc *desc, + struct fdtdec_phandle_args *args); }; /** @@ -268,4 +346,191 @@ int gpio_lookup_name(const char *name, struct udevice **devp, */ unsigned gpio_get_values_as_int(const int *gpio_list); +/** + * gpio_request_by_name() - Locate and request a GPIO by name + * + * This operates by looking up the given list name in the device (device + * tree property) and requesting the GPIO for use. The property must exist + * in @dev's node. + * + * Use @flags to specify whether the GPIO should be an input or output. In + * principle this can also come from the device tree binding but most + * bindings don't provide this information. Specifically, when the GPIO uclass + * calls the xlate() method, it can return default flags, which are then + * ORed with this @flags. + * + * If we find that requesting the GPIO is not always needed we could add a + * new function or a new GPIOD_NO_REQUEST flag. + * + * At present driver model has no reference counting so if one device + * requests a GPIO which subsequently is unbound, the @desc->dev pointer + * will be invalid. However this will only happen if the GPIO device is + * unbound, not if it is removed, so this seems like a reasonable limitation + * for now. There is no real use case for unbinding drivers in normal + * operation. + * + * The device tree binding is doc/device-tree-bindings/gpio/gpio.txt in + * generate terms and each specific device may add additional details in + * a binding file in the same directory. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @index: Index number of the GPIO in that list use request (0=first) + * @desc: Returns GPIO description information. If there is no such + * GPIO, dev->dev will be NULL. + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is + * something wrong with the list, or other -ve for another error (e.g. + * -EBUSY if a GPIO was already requested) + */ +int gpio_request_by_name(struct udevice *dev, const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name() - Request a list of GPIOs + * + * Reads all the GPIOs from a list and requetss them. See + * gpio_request_by_name() for additional details. Lists should not be + * misused to hold unrelated or optional GPIOs. They should only be used + * for things like parallel data lines. A zero phandle terminates the list + * the list. + * + * This function will either succeed, and request all GPIOs in the list, or + * fail and request none (it will free already-requested GPIOs in case of + * an error part-way through). + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @desc_list: Returns a list of GPIO description information + * @max_count: Maximum number of GPIOs to return (@desc_list must be at least + * this big) + * @flags: Indicates the GPIO input/output settings (GPIOD_...) + * @return number of GPIOs requested, or -ve on error + */ +int gpio_request_list_by_name(struct udevice *dev, const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * gpio_get_list_count() - Returns the number of GPIOs in a list + * + * Counts the GPIOs in a list. See gpio_request_by_name() for additional + * details. + * + * @dev: Device requesting the GPIO + * @list_name: Name of GPIO list (e.g. "board-id-gpios") + * @return number of GPIOs (0 for an empty property) or -ENOENT if the list + * does not exist + */ +int gpio_get_list_count(struct udevice *dev, const char *list_name); + +/** + * gpio_request_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_by_name_nodev(const void *blob, int node, + const char *list_name, + int index, struct gpio_desc *desc, int flags); + +/** + * gpio_request_list_by_name_nodev() - request GPIOs without a device + * + * This is a version of gpio_request_list_by_name() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_request_list_by_name_nodev(const void *blob, int node, + const char *list_name, + struct gpio_desc *desc_list, int max_count, + int flags); + +/** + * dm_gpio_free() - Free a single GPIO + * + * This frees a single GPIOs previously returned from gpio_request_by_name(). + * + * @dev: Device which requested the GPIO + * @desc: GPIO to free + * @return 0 if OK, -ve on error + */ +int dm_gpio_free(struct udevice *dev, struct gpio_desc *desc); + +/** + * gpio_free_list() - Free a list of GPIOs + * + * This frees a list of GPIOs previously returned from + * gpio_request_list_by_name(). + * + * @dev: Device which requested the GPIOs + * @desc: List of GPIOs to free + * @count: Number of GPIOs in the list + * @return 0 if OK, -ve on error + */ +int gpio_free_list(struct udevice *dev, struct gpio_desc *desc, int count); + +/** + * gpio_free_list_nodev() - free GPIOs without a device + * + * This is a version of gpio_free_list() that does not use a + * device. Avoid it unless the caller is not yet using driver model + */ +int gpio_free_list_nodev(struct gpio_desc *desc, int count); + +/** + * dm_gpio_get_value() - Get the value of a GPIO + * + * This is the driver model version of the existing gpio_get_value() function + * and should be used instead of that. + * + * For now, these functions have a dm_ prefix since they conflict with + * existing names. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO value (0 for inactive, 1 for active) or -ve on error + */ +int dm_gpio_get_value(struct gpio_desc *desc); + +int dm_gpio_set_value(struct gpio_desc *desc, int value); + +/** + * dm_gpio_set_dir() - Set the direction for a GPIO + * + * This sets up the direction according tot the provided flags. It will do + * nothing unless the direction is actually specified. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return 0 if OK, -ve on error + */ +int dm_gpio_set_dir(struct gpio_desc *desc); + +/** + * dm_gpio_set_dir_flags() - Set direction using specific flags + * + * This is like dm_gpio_set_dir() except that the flags value is provided + * instead of being used from desc->flags. This is needed because in many + * cases the GPIO description does not include direction information. + * Note that desc->flags is updated by this function. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @flags: New flags to use + * @return 0 if OK, -ve on error, in which case desc->flags is not updated + */ +int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags); + +/** + * gpio_get_number() - Get the global GPIO number of a GPIO + * + * This should only be used for debugging or interest. It returns the nummber + * that should be used for gpio_get_value() etc. to access this GPIO. + * + * @desc: GPIO description containing device, offset and flags, + * previously returned by gpio_request_by_name() + * @return GPIO number, or -ve if not found + */ +int gpio_get_number(struct gpio_desc *desc); + #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/include/atmel_lcd.h b/include/atmel_lcd.h new file mode 100644 index 0000000..fa8aa29 --- /dev/null +++ b/include/atmel_lcd.h @@ -0,0 +1,38 @@ +/* + * atmel_lcd.h - Atmel LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ATMEL_LCD_H_ +#define _ATMEL_LCD_H_ + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + u_long vl_clk; /* pixel clock in ps */ + + /* LCD configuration register */ + u_long vl_sync; /* Horizontal / vertical sync */ + u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_long vl_tft; /* 0 = passive, 1 = TFT */ + u_long vl_cont_pol_low; /* contrast polarity is low */ + u_long vl_clk_pol; /* clock polarity */ + + /* Horizontal control register. */ + u_long vl_hsync_len; /* Length of horizontal sync */ + u_long vl_left_margin; /* Time from sync to picture */ + u_long vl_right_margin; /* Time from picture to sync */ + + /* Vertical control register. */ + u_long vl_vsync_len; /* Length of vertical sync */ + u_long vl_upper_margin; /* Time from sync to picture */ + u_long vl_lower_margin; /* Time from picture to sync */ + + u_long mmio; /* Memory mapped registers */ +} vidinfo_t; + +#endif diff --git a/include/axp221.h b/include/axp221.h index e6639f1..a20e25c 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -12,7 +12,6 @@ #define AXP223_DEVICE_ADDR 0x3a3 #define AXP223_RUNTIME_ADDR 0x2d -#define AXP223_DEVICE_MODE_DATA 0x7c3e00 /* Page 0 addresses */ #define AXP221_CHIP_ID 0x03 @@ -26,6 +25,9 @@ #define AXP221_OUTPUT_CTRL1_ALDO1_EN (1 << 6) #define AXP221_OUTPUT_CTRL1_ALDO2_EN (1 << 7) #define AXP221_OUTPUT_CTRL2 0x12 +#define AXP221_OUTPUT_CTRL2_ELDO1_EN (1 << 0) +#define AXP221_OUTPUT_CTRL2_ELDO2_EN (1 << 1) +#define AXP221_OUTPUT_CTRL2_ELDO3_EN (1 << 2) #define AXP221_OUTPUT_CTRL2_DLDO1_EN (1 << 3) #define AXP221_OUTPUT_CTRL2_DLDO2_EN (1 << 4) #define AXP221_OUTPUT_CTRL2_DLDO3_EN (1 << 5) @@ -37,6 +39,9 @@ #define AXP221_DLDO2_CTRL 0x16 #define AXP221_DLDO3_CTRL 0x17 #define AXP221_DLDO4_CTRL 0x18 +#define AXP221_ELDO1_CTRL 0x19 +#define AXP221_ELDO2_CTRL 0x1a +#define AXP221_ELDO3_CTRL 0x1b #define AXP221_DCDC1_CTRL 0x21 #define AXP221_DCDC2_CTRL 0x22 #define AXP221_DCDC3_CTRL 0x23 @@ -69,6 +74,7 @@ int axp221_set_dldo4(unsigned int mvolt); int axp221_set_aldo1(unsigned int mvolt); int axp221_set_aldo2(unsigned int mvolt); int axp221_set_aldo3(unsigned int mvolt); +int axp221_set_eldo(int eldo_num, unsigned int mvolt); int axp221_init(void); int axp221_get_sid(unsigned int *sid); int axp_drivebus_enable(void); diff --git a/include/bootstage.h b/include/bootstage.h index df13ab2..0276cb3 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -86,9 +86,9 @@ enum bootstage_id { BOOTSTAGE_ID_POST_FAIL_R, /* Post failure reported after reloc */ /* - * This set is reported ony by x86, and the meaning is different. In + * This set is reported only by x86, and the meaning is different. In * this case we are reporting completion of a particular stage. - * This should probably change in he x86 code (which doesn't report + * This should probably change in the x86 code (which doesn't report * errors in any case), but discussion this can perhaps wait until we * have a generic board implementation. */ @@ -194,6 +194,7 @@ enum bootstage_id { BOOTSTAGE_ID_MAIN_CPU_READY, BOOTSTAGE_ID_ACCUM_LCD, + BOOTSTAGE_ID_ACCUM_SCSI, /* a few spare for the user, from here */ BOOTSTAGE_ID_USER, diff --git a/include/common.h b/include/common.h index 4b3e0d3..9129454 100644 --- a/include/common.h +++ b/include/common.h @@ -183,6 +183,7 @@ typedef void (interrupt_handler_t)(void *); /* * Function Prototypes */ +int dram_init(void); void hang (void) __attribute__ ((noreturn)); @@ -228,12 +229,13 @@ int run_command_list(const char *cmd, int len, int flag); extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ -void board_init_f(ulong); -void board_init_r (gd_t *, ulong) __attribute__ ((noreturn)); -int checkboard (void); -int checkflash (void); -int checkdram (void); -int last_stage_init(void); +void board_init_f(ulong); +void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); +int checkboard(void); +int show_board_info(void); +int checkflash(void); +int checkdram(void); +int last_stage_init(void); extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index be616e8..49674f4 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -13,7 +13,7 @@ #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ "if " #devtypel " dev ${devnum}; then " \ "setenv devtype " #devtypel "; " \ - "run scan_dev_for_boot; " \ + "run scan_dev_for_boot_part; " \ "fi\0" #define BOOTENV_SHARED_BLKDEV(devtypel) \ @@ -90,15 +90,8 @@ #endif #ifdef CONFIG_CMD_USB -#define BOOTENV_RUN_USB_INIT "run usb_init; " -#define BOOTENV_SET_USB_NEED_INIT "setenv usb_need_init; " +#define BOOTENV_RUN_USB_INIT "usb start; " #define BOOTENV_SHARED_USB \ - "usb_init=" \ - "if ${usb_need_init}; then " \ - "setenv usb_need_init false; " \ - "usb start 0; " \ - "fi\0" \ - \ "usb_boot=" \ BOOTENV_RUN_USB_INIT \ BOOTENV_SHARED_BLKDEV_BODY(usb) @@ -106,7 +99,6 @@ #define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV #else #define BOOTENV_RUN_USB_INIT -#define BOOTENV_SET_USB_NEED_INIT #define BOOTENV_SHARED_USB #define BOOTENV_DEV_USB \ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB @@ -118,7 +110,7 @@ #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ "bootcmd_dhcp=" \ BOOTENV_RUN_USB_INIT \ - "if dhcp ${scriptaddr} boot.scr.uimg; then " \ + "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ "source ${scriptaddr}; " \ "fi\0" #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ @@ -162,8 +154,8 @@ BOOTENV_SHARED_IDE \ "boot_prefixes=/ /boot/\0" \ "boot_scripts=boot.scr.uimg boot.scr\0" \ + "boot_script_dhcp=boot.scr.uimg\0" \ BOOTENV_BOOT_TARGETS \ - "bootpart=1\0" \ \ "boot_extlinux=" \ "sysboot ${devtype} ${devnum}:${bootpart} any " \ @@ -194,17 +186,30 @@ "done\0" \ \ "scan_dev_for_boot=" \ - "echo Scanning ${devtype} ${devnum}...; " \ + "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ "for prefix in ${boot_prefixes}; do " \ "run scan_dev_for_extlinux; " \ "run scan_dev_for_scripts; " \ "done\0" \ \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "for bootpart in ${devplist}; do " \ + "if fstype ${devtype} ${devnum}:${bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_USB_NEED_INIT BOOTENV_SET_SCSI_NEED_INIT \ + "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" +#ifndef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd" +#endif + #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index eeb0671..6aaaaa4 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -433,6 +433,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ #define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index e8a8d29..59a8d1b 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -675,6 +675,7 @@ combinations. this should be removed later #define CONFIG_UBOOTPATH "u-boot.bin" #define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ #ifdef CONFIG_SDCARD #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index ecb3d7b..e24b923 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -581,4 +581,6 @@ #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND +#include <asm/fsl_secure_boot.h> + #endif /* __CONFIG_H */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h deleted file mode 100644 index 27539d2..0000000 --- a/include/configs/CATcenter.h +++ /dev/null @@ -1,750 +0,0 @@ -/* - * ueberarbeitet durch Christoph Seyfert - * - * (C) Copyright 2004-2005 DENX Software Engineering, - * Wolfgang Grandegger <wg@denx.de> - * (C) Copyright 2003 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * Credits: Stefan Roese, Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PPCHAMELEON_MODULE_BA 0 /* Basic Model */ -#define CONFIG_PPCHAMELEON_MODULE_ME 1 /* Medium Model */ -#define CONFIG_PPCHAMELEON_MODULE_HI 2 /* High-End Model */ -#ifndef CONFIG_PPCHAMELEON_MODULE_MODEL -#define CONFIG_PPCHAMELEON_MODULE_MODEL CONFIG_PPCHAMELEON_MODULE_BA -#endif - -/* Only one of the following two symbols must be defined (default is 25 MHz) - * CONFIG_PPCHAMELEON_CLK_25 - * CONFIG_PPCHAMELEON_CLK_33 - */ -#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33)) -#define CONFIG_PPCHAMELEON_CLK_25 -#endif - -#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33)) -#error "* Two external frequencies (SysClk) are defined! *" -#endif - -#undef CONFIG_PPCHAMELEON_SMI712 - -/* - * Debug stuff - */ -#undef __DEBUG_START_FROM_SRAM__ -#define __DISABLE_MACHINE_EXCEPTION__ - -#ifdef __DEBUG_START_FROM_SRAM__ -#define CONFIG_SYS_DUMMY_FLASH_SIZE 1024*1024*4 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ -#define CONFIG_SYS_LDSCRIPT "board/dave/PPChameleonEVB/u-boot.lds" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ - -#ifdef CONFIG_PPCHAMELEON_CLK_25 -# define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ -#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#else -# error "* External frequency (SysClk) not defined! *" -#endif - -#define CONFIG_CONS_INDEX 2 /* Use UART1 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_VERSION_VARIABLE 1 /* add version variable */ -#define CONFIG_IDENT_STRING "1" - -#undef CONFIG_BOOTARGS - -/* Ethernet stuff */ -#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ -#define CONFIG_ETHADDR 00:50:C2:1E:AF:FE -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:50:C2:1E:AF:FD - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -#define CONFIG_PPC4xx_EMAC -#undef CONFIG_EXT_PHY - -#define CONFIG_MII 1 /* MII PHY management */ -#ifndef CONFIG_EXT_PHY -#define CONFIG_PHY_ADDR 1 /* EMAC0 PHY address */ -#define CONFIG_PHY1_ADDR 16 /* EMAC1 PHY address */ -#else -#define CONFIG_PHY_ADDR 2 /* PHY address */ -#endif -#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ -#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * NAND-FLASH stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_NAND0_BASE 0xFF400000 -#define CONFIG_SYS_NAND1_BASE 0xFF000000 -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } -#define NAND_BIG_DELAY_US 25 - -/* For CATcenter there is only NAND on the module */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define NAND_NO_RB - -#define CONFIG_SYS_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CONFIG_SYS_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ - -#define CONFIG_SYS_NAND1_CE (0x80000000 >> 14) /* our CE is GPIO14 */ -#define CONFIG_SYS_NAND1_CLE (0x80000000 >> 15) /* our CLE is GPIO15 */ -#define CONFIG_SYS_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ -#define CONFIG_SYS_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ - - -#define MACRO_NAND_DISABLE_CE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_ENABLE_CE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_CLRALE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_ALE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_ALE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_SETALE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_ALE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_ALE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CLE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CLE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ - switch((unsigned long)nandptr) { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CLE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CLE); \ - break; \ - } \ -} while(0) - -#ifdef NAND_NO_RB -/* constant delay (see also tR in the datasheet) */ -#define NAND_WAIT_READY(nand) do { \ - udelay(12); \ -} while (0) -#else -/* use the R/B pin */ -/* TBD */ -#endif - -#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) -#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#if 0 /* No PCI on CATcenter */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#undef CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ - -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* PCI Vendor ID: IBM */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: --- */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ - -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#endif /* No PCI */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFC0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -/*----------------------------------------------------------------------- - * Environment Variable setup - */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CONFIG_ENV_ADDR 0xFFFF8000 /* environment starts at the first small sector */ -#define CONFIG_ENV_SECT_SIZE 0x2000 /* 8196 bytes may be used for env vars*/ -#define CONFIG_ENV_ADDR_REDUND 0xFFFFA000 -#define CONFIG_ENV_SIZE_REDUND 0x2000 - -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */ - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC16) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (External SRAM) initialization */ -/* Since this must replace NOR Flash, we use the same settings for CS0 */ -#define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (Flash Bank 1, NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x92015480 -#define CONFIG_SYS_EBC_PB2CR 0xFF458000 /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (Flash Bank 2, NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x92015480 -#define CONFIG_SYS_EBC_PB3CR 0xFF058000 /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit */ - -#ifdef CONFIG_PPCHAMELEON_SMI712 -/* - * Video console (graphic: SMI LynxEM) - */ -#define CONFIG_VIDEO -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SMI_LYNXEM -#define CONFIG_VIDEO_LOGO -/*#define CONFIG_VIDEO_BMP_LOGO*/ -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */ -#define CONFIG_SYS_ISA_IO 0xE8000000 -/* see also drivers/video/videomodes.c */ -#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x303 -#endif - -/*----------------------------------------------------------------------- - * FPGA stuff - */ -/* FPGA internal regs */ -#define CONFIG_SYS_FPGA_MODE 0x00 -#define CONFIG_SYS_FPGA_STATUS 0x02 -#define CONFIG_SYS_FPGA_TS 0x04 -#define CONFIG_SYS_FPGA_TS_LOW 0x06 -#define CONFIG_SYS_FPGA_TS_CAP0 0x10 -#define CONFIG_SYS_FPGA_TS_CAP0_LOW 0x12 -#define CONFIG_SYS_FPGA_TS_CAP1 0x14 -#define CONFIG_SYS_FPGA_TS_CAP1_LOW 0x16 -#define CONFIG_SYS_FPGA_TS_CAP2 0x18 -#define CONFIG_SYS_FPGA_TS_CAP2_LOW 0x1a -#define CONFIG_SYS_FPGA_TS_CAP3 0x1c -#define CONFIG_SYS_FPGA_TS_CAP3_LOW 0x1e - -/* FPGA Mode Reg */ -#define CONFIG_SYS_FPGA_MODE_CF_RESET 0x0001 -#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100 -#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR 0x1000 -#define CONFIG_SYS_FPGA_MODE_TS_CLEAR 0x2000 - -/* FPGA Status Reg */ -#define CONFIG_SYS_FPGA_STATUS_DIP0 0x0001 -#define CONFIG_SYS_FPGA_STATUS_DIP1 0x0002 -#define CONFIG_SYS_FPGA_STATUS_DIP2 0x0004 -#define CONFIG_SYS_FPGA_STATUS_FLASH 0x0008 -#define CONFIG_SYS_FPGA_STATUS_TS_IRQ 0x1000 - -#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */ -#define CONFIG_SYS_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S50E*/ - -/* FPGA program pin configuration */ -#define CONFIG_SYS_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */ -#define CONFIG_SYS_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */ -#define CONFIG_SYS_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */ -#define CONFIG_SYS_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */ -#define CONFIG_SYS_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Definitions for GPIO setup (PPC405EP specific) - * - * GPIO0[0] - External Bus Controller BLAST output - * GPIO0[1-9] - Instruction trace outputs -> GPIO - * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs - * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO - * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs - * GPIO0[24-27] - UART0 control signal inputs/outputs - * GPIO0[28-29] - UART1 data signal input/output - * GPIO0[30] - EMAC0 input - * GPIO0[31] - EMAC1 reject packet as output - */ -#define CONFIG_SYS_GPIO0_OSRL 0x40000550 -#define CONFIG_SYS_GPIO0_OSRH 0x00000110 -#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 -/*#define CONFIG_SYS_GPIO0_ISR1H 0x15555445*/ -#define CONFIG_SYS_GPIO0_ISR1H 0x15555444 -#define CONFIG_SYS_GPIO0_TSRL 0x00000000 -#define CONFIG_SYS_GPIO0_TSRH 0x00000000 -#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014 - -#define CONFIG_NO_SERIAL_EEPROM - -/*--------------------------------------------------------------------*/ - -#ifdef CONFIG_NO_SERIAL_EEPROM - -/* -!----------------------------------------------------------------------- -! Defines for entry options. -! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that -! are plugged in the board will be utilized as non-ECC DIMMs. -!----------------------------------------------------------------------- -*/ -#undef AUTO_MEMORY_CONFIG -#define DIMM_READ_ADDR 0xAB -#define DIMM_WRITE_ADDR 0xAA - -/* Defines for CPC0_PLLMR1 Register fields */ -#define PLL_ACTIVE 0x80000000 -#define CPC0_PLLMR1_SSCS 0x80000000 -#define PLL_RESET 0x40000000 -#define CPC0_PLLMR1_PLLR 0x40000000 - /* Feedback multiplier */ -#define PLL_FBKDIV 0x00F00000 -#define CPC0_PLLMR1_FBDV 0x00F00000 -#define PLL_FBKDIV_16 0x00000000 -#define PLL_FBKDIV_1 0x00100000 -#define PLL_FBKDIV_2 0x00200000 -#define PLL_FBKDIV_3 0x00300000 -#define PLL_FBKDIV_4 0x00400000 -#define PLL_FBKDIV_5 0x00500000 -#define PLL_FBKDIV_6 0x00600000 -#define PLL_FBKDIV_7 0x00700000 -#define PLL_FBKDIV_8 0x00800000 -#define PLL_FBKDIV_9 0x00900000 -#define PLL_FBKDIV_10 0x00A00000 -#define PLL_FBKDIV_11 0x00B00000 -#define PLL_FBKDIV_12 0x00C00000 -#define PLL_FBKDIV_13 0x00D00000 -#define PLL_FBKDIV_14 0x00E00000 -#define PLL_FBKDIV_15 0x00F00000 - /* Forward A divisor */ -#define PLL_FWDDIVA 0x00070000 -#define CPC0_PLLMR1_FWDVA 0x00070000 -#define PLL_FWDDIVA_8 0x00000000 -#define PLL_FWDDIVA_7 0x00010000 -#define PLL_FWDDIVA_6 0x00020000 -#define PLL_FWDDIVA_5 0x00030000 -#define PLL_FWDDIVA_4 0x00040000 -#define PLL_FWDDIVA_3 0x00050000 -#define PLL_FWDDIVA_2 0x00060000 -#define PLL_FWDDIVA_1 0x00070000 - /* Forward B divisor */ -#define PLL_FWDDIVB 0x00007000 -#define CPC0_PLLMR1_FWDVB 0x00007000 -#define PLL_FWDDIVB_8 0x00000000 -#define PLL_FWDDIVB_7 0x00001000 -#define PLL_FWDDIVB_6 0x00002000 -#define PLL_FWDDIVB_5 0x00003000 -#define PLL_FWDDIVB_4 0x00004000 -#define PLL_FWDDIVB_3 0x00005000 -#define PLL_FWDDIVB_2 0x00006000 -#define PLL_FWDDIVB_1 0x00007000 - /* PLL tune bits */ -#define PLL_TUNE_MASK 0x000003FF -#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ -#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ -#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ -#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ -#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ -#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ -#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ - -/* Defines for CPC0_PLLMR0 Register fields */ - /* CPU divisor */ -#define PLL_CPUDIV 0x00300000 -#define CPC0_PLLMR0_CCDV 0x00300000 -#define PLL_CPUDIV_1 0x00000000 -#define PLL_CPUDIV_2 0x00100000 -#define PLL_CPUDIV_3 0x00200000 -#define PLL_CPUDIV_4 0x00300000 - /* PLB divisor */ -#define PLL_PLBDIV 0x00030000 -#define CPC0_PLLMR0_CBDV 0x00030000 -#define PLL_PLBDIV_1 0x00000000 -#define PLL_PLBDIV_2 0x00010000 -#define PLL_PLBDIV_3 0x00020000 -#define PLL_PLBDIV_4 0x00030000 - /* OPB divisor */ -#define PLL_OPBDIV 0x00003000 -#define CPC0_PLLMR0_OPDV 0x00003000 -#define PLL_OPBDIV_1 0x00000000 -#define PLL_OPBDIV_2 0x00001000 -#define PLL_OPBDIV_3 0x00002000 -#define PLL_OPBDIV_4 0x00003000 - /* EBC divisor */ -#define PLL_EXTBUSDIV 0x00000300 -#define CPC0_PLLMR0_EPDV 0x00000300 -#define PLL_EXTBUSDIV_2 0x00000000 -#define PLL_EXTBUSDIV_3 0x00000100 -#define PLL_EXTBUSDIV_4 0x00000200 -#define PLL_EXTBUSDIV_5 0x00000300 - /* MAL divisor */ -#define PLL_MALDIV 0x00000030 -#define CPC0_PLLMR0_MPDV 0x00000030 -#define PLL_MALDIV_1 0x00000000 -#define PLL_MALDIV_2 0x00000010 -#define PLL_MALDIV_3 0x00000020 -#define PLL_MALDIV_4 0x00000030 - /* PCI divisor */ -#define PLL_PCIDIV 0x00000003 -#define CPC0_PLLMR0_PPFD 0x00000003 -#define PLL_PCIDIV_1 0x00000000 -#define PLL_PCIDIV_2 0x00000001 -#define PLL_PCIDIV_3 0x00000002 -#define PLL_PCIDIV_4 0x00000003 - -#ifdef CONFIG_PPCHAMELEON_CLK_25 -/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 25.0 MHz input clock to the 405EP) */ -#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_6 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_2) -#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) - -#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) - -/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */ -#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \ - PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ - PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_2) -#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) - -#else -#error "* External frequency (SysClk) not defined! *" -#endif - -#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI) -/* Model HI */ -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_333_111_37_55_55 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_333_111_37_55_55 -#define CONFIG_SYS_OPB_FREQ 55555555 -/* Model ME */ -#elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_266_133_33_66_33 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_266_133_33_66_33 -#define CONFIG_SYS_OPB_FREQ 66666666 -#else -/* Model BA (default) */ -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_133_133_33_66_33 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_133_133_33_66_33 -#define CONFIG_SYS_OPB_FREQ 66666666 -#endif - -#endif /* CONFIG_NO_SERIAL_EEPROM */ - -#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nand" -#define CONFIG_JFFS2_PART_SIZE 0x00200000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support - * - * Note: fake mtd_id used, no linux mtd map file - */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nand0=catcenter" -#define MTDPARTS_DEFAULT "mtdparts=catcenter:2m(nand)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h deleted file mode 100644 index 1861aa8..0000000 --- a/include/configs/IceCube.h +++ /dev/null @@ -1,403 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_ICECUBE 1 /* ... on IceCube board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFF000000 boot low for 16 MiB boards - * 0xFF800000 boot low for 8 MiB boards - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI - -#if defined(CONFIG_PCI) -#define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_SYS_XLB_PIPELINING 1 - -#define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_SYS_OHCI_BE_CONTROLLER -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#endif -#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -#if defined(CONFIG_LITE5200B) -# error CONFIG_SYS_LOWBOOT08 is incompatible with the Lite5200B -#else -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT08 1 -#endif -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/MPC5200/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#if defined(CONFIG_LITE5200B) -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#else -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -#endif - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 - -/* - * Flash configuration - */ -#if defined(CONFIG_LITE5200B) -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x01760000 + 0x00800000) -#else /* CONFIG_SYS_LOWBOOT */ -#if defined(CONFIG_SYS_LOWBOOT08) -# error CONFIG_SYS_LOWBOOT08 is incompatible with the Lite5200B -#endif -#if defined(CONFIG_SYS_LOWBOOT16) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x01060000) -#endif -#endif /* CONFIG_SYS_LOWBOOT */ -#else /* !CONFIG_LITE5200B (IceCube)*/ -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00740000 + 0x00800000) -#else /* CONFIG_SYS_LOWBOOT */ -#if defined(CONFIG_SYS_LOWBOOT08) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000 + 0x00800000) -#endif -#if defined(CONFIG_SYS_LOWBOOT16) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#endif -#endif /* CONFIG_SYS_LOWBOOT */ -#endif /* CONFIG_LITE5200B */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ - -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ - -#if defined(CONFIG_LITE5200B) -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS1_START,CONFIG_SYS_CS0_START} -#endif - - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#if defined(CONFIG_LITE5200B) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#else -#define CONFIG_ENV_SECT_SIZE 0x10000 -#endif -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#ifdef CONFIG_MPC5200_DDR -#define CONFIG_SYS_GPS_PORT_CONFIG 0x90000004 -#else -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10000004 -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#if defined(CONFIG_LITE5200B) -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_CFG 0x00047800 -#define CONFIG_SYS_CS0_START (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE) -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_CS0_START -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047800 -#else /* IceCube aka Lite5200 */ -#ifdef CONFIG_MPC5200_DDR - -#define CONFIG_SYS_BOOTCS_START (CONFIG_SYS_CS1_START + CONFIG_SYS_CS1_SIZE) -#define CONFIG_SYS_BOOTCS_SIZE 0x00800000 -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS1_SIZE 0x00800000 -#define CONFIG_SYS_CS1_CFG 0x00047800 - -#else /* !CONFIG_MPC5200_DDR */ - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#endif /* CONFIG_MPC5200_DDR */ -#endif /*CONFIG_LITE5200B */ - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h deleted file mode 100644 index aefde74..0000000 --- a/include/configs/MPC8360EMDS.h +++ /dev/null @@ -1,735 +0,0 @@ -/* - * Copyright (C) 2006,2011 Freescale Semiconductor, Inc. - * - * Dave Liu <daveliu@freescale.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 family */ -#define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ -#define CONFIG_MPC8360EMDS 1 /* MPC8360EMDS board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#undef CONFIG_PQ_MDS_PIB /* POWERQUICC MDS Platform IO Board */ -#undef CONFIG_PQ_MDS_PIB_ATM /* QOC3 ATM card */ - -/* - * System Clock Setup - */ -#ifdef CONFIG_CLKIN_33MHZ -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 33330000 /* in HZ */ -#else -#define CONFIG_83XX_CLKIN 33330000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33330000 -#endif - -#elif defined(CONFIG_CLKIN_66MHZ) -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ -#else -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66000000 -#endif -#else -#error Unknown oscillator frequency. -#endif - -/* - * Hardware Reset Configuration Word - */ -#ifdef CONFIG_CLKIN_33MHZ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_8X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CE_PLL_VCO_DIV_4 |\ - HRCWL_CE_PLL_DIV_1X1 |\ - HRCWL_CE_TO_PLL_1X15 |\ - HRCWL_CORE_TO_CSB_2X1) -#elif defined(CONFIG_CLKIN_66MHZ) -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CE_PLL_VCO_DIV_4 |\ - HRCWL_CE_PLL_DIV_1X1 |\ - HRCWL_CE_TO_PLL_1X6 |\ - HRCWL_CORE_TO_CSB_2X1) -#endif - -#ifdef CONFIG_PCISLAVE -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT |\ - HRCWH_PCI1_ARBITER_DISABLE |\ - HRCWH_PCICKDRV_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCICKDRV_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT) -#endif - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000000 -#define CONFIG_SYS_SICRL 0x40000000 - -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ -#define CONFIG_BOARD_EARLY_INIT_R - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE - /* + 256M */ -#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ - | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CONFIG_SYS_83XX_DDR_USES_CS0 - -#define CONFIG_DDR_ECC /* support DDR ECC function */ -#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ - -/* - * DDRCDR - DDR Control Driver Register - */ -#define CONFIG_SYS_DDRCDR_VALUE 0x80080001 - -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#if defined(CONFIG_SPD_EEPROM) -/* - * Determine DDR configuration from I2C interface. - */ -#define SPD_EEPROM_ADDRESS 0x52 /* DDR SODIMM */ -#else -/* - * Manually set up DDR parameters - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#if defined(CONFIG_DDR_II) -#define CONFIG_SYS_DDRCDR 0x80080001 -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80330102 -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x38357322 -#define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000 -#define CONFIG_SYS_DDR_MODE 0x47d00432 -#define CONFIG_SYS_DDR_MODE2 0x8000c000 -#define CONFIG_SYS_DDR_INTERVAL 0x03cf0080 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#else -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_9) -#define CONFIG_SYS_DDR_CS1_CONFIG CONFIG_SYS_DDR_CS0_CONFIG -#define CONFIG_SYS_DDR_TIMING_1 0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */ -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0x42008000 /* Self refresh,2T timing */ -#define CONFIG_SYS_DDR_MODE 0x20000162 /* DLL,normal,seq,4/2.5 */ -#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* page mode */ -#endif -#endif - -/* - * Memory test - */ -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 - -/* - * The reserved memory - */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ -#define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * BCSR on the Local Bus - */ -#define CONFIG_SYS_BCSR 0xF8000000 - /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFFE9F7 */ - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -#define CONFIG_SYS_LB_SDRAM /* if board has SRDAM on local bus */ - -#ifdef CONFIG_SYS_LB_SDRAM -#define CONFIG_SYS_LBLAWBAR2 0 -#define CONFIG_SYS_LBLAWAR2 (LBLAWAR_EN | LBLAWAR_64MB) - -/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * - * For BR2, need: - * Base address = BR[0:16] = dynamic - * port size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * xxxx xxxx xxxx xxxx x001 1000 0110 0001 = 00001861 - */ - -/* Port size=32bit, MSEL=DRAM */ -#define CONFIG_SYS_BR2 (BR_PS_32 | BR_MS_SDRAM | BR_V) /* 0xF0001861 */ - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 - */ - -#define CONFIG_SYS_OR2 (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \ - | OR_SDRAM_XAM \ - | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ - | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ - | OR_SDRAM_EAD) - /* 0xFC006901 */ - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -#define CONFIG_SYS_LBC_LSDMR_COMMON 0x0063b723 - -/* - * SDRAM Controller configuration sequence. - */ -#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) -#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) -#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) - -#endif - -/* - * Windows to access Platform I/O Boards (PIB) via local bus - */ -#define CONFIG_SYS_PIB_BASE 0xF8008000 -#define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024) - -/* [RFC] This LBLAW only covers the 2nd window (CS5) */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM \ - CONFIG_SYS_PIB_BASE + CONFIG_SYS_PIB_WINDOW_SIZE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -/* - * CS4 on Local Bus, to PIB - */ - /* CS4 base address at 0xf8008000 */ -#define CONFIG_SYS_BR4_PRELIM (CONFIG_SYS_PIB_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8008801 */ -#define CONFIG_SYS_OR4_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ - -/* - * CS5 on Local Bus, to PIB - */ - /* CS5 base address at 0xf8010000 */ -#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_PIB_BASE + \ - CONFIG_SYS_PIB_WINDOW_SIZE) \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8010801 */ -#define CONFIG_SYS_OR5_PRELIM (CONFIG_SYS_PIB_BASE \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x52} } - -/* - * Config on-board RTC - */ -#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE0300000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ - -#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 -#define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 - - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_83XX_PCI_STREAMING - -#undef CONFIG_EEPRO100 -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ - -#endif /* CONFIG_PCI */ - - -#define CONFIG_HWCONFIG 1 - -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" -#define CONFIG_PHY_MODE_NEED_CHANGE - -#define CONFIG_UEC_ETH1 /* GETH1 */ - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 -#endif - -#define CONFIG_UEC_ETH2 /* GETH2 */ - -#ifdef CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 -#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 -#endif - -/* - * Environment - */ - -#ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x20000 - #define CONFIG_ENV_SIZE 0x2000 -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_SDRAM - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ -#define CONFIG_BAT_RW - -/* DDR/LBC SDRAM: cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \ - | BATU_BL_4M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* BCSR: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_BCSR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_BCSR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* DDR/LBC SDRAM next 256M: cacheable */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM_BASE2 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM_BASE2 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ - -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=ramfs.83xx\0" \ - "fdtaddr=780000\0" \ - "fdtfile=mpc836x_mds.dtb\0" \ - "" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ - "$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h deleted file mode 100644 index 1b8bad1..0000000 --- a/include/configs/MPC8360ERDK.h +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu <daveliu@freescale.com> - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada <peterb@logicpd.com> - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 family */ -#define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ -#define CONFIG_MPC8360ERDK 1 /* MPC8360ERDK board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xFF800000 - -/* - * System Clock Setup - */ -#ifdef CONFIG_CLKIN_33MHZ -#define CONFIG_83XX_CLKIN 33333333 -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_PCI_33M 1 -#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1 -#else -#define CONFIG_83XX_CLKIN 66000000 -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_PCI_66M 1 -#define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_5X1 -#endif /* CONFIG_CLKIN_33MHZ */ - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_MPC8360ERDK |\ - HRCWL_CORE_TO_CSB_2X1 |\ - HRCWL_CE_TO_PLL_1X15) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCICKDRV_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_SECONDARY_DDR_DISABLE |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LALE_EARLY) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000000 -#define CONFIG_SYS_SICRL 0x40000000 - -#define CONFIG_BOARD_EARLY_INIT_R - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ - | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CONFIG_SYS_83XX_DDR_USES_CS0 - -#define CONFIG_DDR_ECC /* support DDR ECC function */ -#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ - -/* - * DDRCDR - DDR Control Driver Register - */ -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN \ - | DDRCDR_ODT \ - | DDRCDR_Q_DRN) - /* 0x80080001 */ - -#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup */ - -/* - * Manually set up DDR parameters - */ -#define CONFIG_DDR_II -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ - | CSCONFIG_ROW_BIT_13 \ - | CSCONFIG_COL_BIT_10 \ - | CSCONFIG_ODT_WR_ONLY_CURRENT) -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 \ - | SDRAM_CFG_ECC_EN) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) \ - | (1115 << SDRAM_INTERVAL_REFINT_SHIFT)) -#define CONFIG_SYS_DDR_MODE 0x47800432 -#define CONFIG_SYS_DDR_MODE2 0x8000c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_30) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (3 << TIMING_CFG1_WRREC_SHIFT) | \ - (10 << TIMING_CFG1_REFREC_SHIFT) | \ - (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (3 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (0 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -/* - * Memory test - */ -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 - -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* FLASH base address */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use intel Flash protection. */ - - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND flash on the local bus - */ -#define CONFIG_SYS_NAND_BASE 0x60000000 -#define CONFIG_CMD_NAND 1 -#define CONFIG_NAND_FSL_UPM 1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -/* - * [RFC] Comment said 4KB window; code said 256MB window; OR1 says 64MB - * ... What's correct? - */ -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -/* Port size 8 bit, UPMA */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_PS_8 \ - | BR_MS_UPMA \ - | BR_V) - /* 0x60000881 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_UPM_EAD) - /* 0xFC000001 */ - -/* - * Fujitsu MB86277 (MINT) graphics controller - */ -#define CONFIG_SYS_VIDEO_BASE 0x70000000 - -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VIDEO_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - -/* Port size 32 bit, UPMB */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VIDEO_BASE \ - | BR_PS_32 \ - | BR_MS_UPMB \ - | BR_V) - /* 0x000018a1 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB | OR_UPM_EAD) - /* 0xFC000001 */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x52} } - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_PCI - -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0xE0300000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xE0300000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ - -#endif /* CONFIG_PCI */ - -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" - -#define CONFIG_UEC_ETH1 /* GETH1 */ - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 2 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 -#endif - -#define CONFIG_UEC_ETH2 /* GETH2 */ - -#ifdef CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4 -#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 4 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 -#endif - -/* - * Environment - */ - -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x20000 -#else /* CONFIG_SYS_RAMBOOT */ -#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif /* CONFIG_SYS_RAMBOOT */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_LOADS -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - /* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \ - | BATU_BL_4M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_NAND_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_NAND_BASE \ - | BATU_BL_64M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR \ - | BATL_PP_RW) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_VIDEO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_VIDEO_BASE \ - | BATU_BL_64M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#else /* CONFIG_PCI */ -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_LOADADDR a00000 -#define CONFIG_HOSTNAME mpc8360erdk -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_ROOTPATH "/nfsroot/" - -#define CONFIG_BOOTDELAY 2 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "loadaddr=a00000\0" \ - "fdtaddr=900000\0" \ - "fdtfile=mpc836x_rdk.dtb\0" \ - "fsfile=fs\0" \ - "ubootfile=u-boot.bin\0" \ - "mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),"\ - "-(rootfs)\0" \ - "setbootargs=setenv bootargs console=$consoledev,$baudrate " \ - "$mtdparts panic=1\0" \ - "adddhcpargs=setenv bootargs $bootargs ip=on\0" \ - "addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:" \ - "$gatewayip:$netmask:$hostname:$netdev:off " \ - "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \ - "addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 " \ - "rootfstype=jffs2 rw\0" \ - "tftp_get_uboot=tftp 100000 $ubootfile\0" \ - "tftp_get_kernel=tftp $loadaddr $bootfile\0" \ - "tftp_get_dtb=tftp $fdtaddr $fdtfile\0" \ - "tftp_get_fs=tftp c00000 $fsfile\0" \ - "nand_erase_kernel=nand erase 0 400000\0" \ - "nand_erase_dtb=nand erase 400000 20000\0" \ - "nand_erase_fs=nand erase 420000 3be0000\0" \ - "nand_write_kernel=nand write.jffs2 $loadaddr 0 400000\0" \ - "nand_write_dtb=nand write.jffs2 $fdtaddr 400000 20000\0" \ - "nand_write_fs=nand write.jffs2 c00000 420000 $filesize\0" \ - "nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0" \ - "nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0" \ - "nor_reflash=protect off ff800000 ff87ffff ; " \ - "erase ff800000 ff87ffff ; " \ - "cp.b 100000 ff800000 $filesize\0" \ - "nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel " \ - "nand_write_kernel\0" \ - "nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\ - "nand_reflash_fs=run tftp_get_fs nand_erase_fs nand_write_fs\0" \ - "nand_reflash=run nand_reflash_kernel nand_reflash_dtb " \ - "nand_reflash_fs\0" \ - "boot_m=bootm $loadaddr - $fdtaddr\0" \ - "dhcpboot=dhcp ; run setbootargs adddhcpargs tftp_get_dtb boot_m\0"\ - "nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\ - "boot_m\0" \ - "nandboot=run setbootargs addnandargs nand_read_kernel nand_read_dtb "\ - "boot_m\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run dhcpboot" - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 8ed0f7c..19e0e30 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -15,6 +15,8 @@ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ #define CONFIG_MPC837XERDB 1 +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h deleted file mode 100644 index c75638a..0000000 --- a/include/configs/P1_P2_RDB.h +++ /dev/null @@ -1,808 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * P1 P2 RDB board configuration file - * This file is intended to address a set of Low End and Ultra Low End - * Freescale SOCs of QorIQ series(RDB platforms). - * Currently only P2020RDB - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_36BIT -#define CONFIG_PHYS_64BIT -#endif - -#ifdef CONFIG_P1011RDB -#define CONFIG_P1011 -#define CONFIG_SYS_L2_SIZE (256 << 10) -#endif -#ifdef CONFIG_P1020RDB -#define CONFIG_P1020 -#define CONFIG_SYS_L2_SIZE (256 << 10) -#endif -#ifdef CONFIG_P2010RDB -#define CONFIG_P2010 -#define CONFIG_SYS_L2_SIZE (512 << 10) -#endif -#ifdef CONFIG_P2020RDB -#define CONFIG_P2020 -#define CONFIG_SYS_L2_SIZE (512 << 10) -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_MMC_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (129 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_MMC_BOOT -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_FLASH_MINIMAL -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SPL_MAX_SIZE (128 * 1024) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" -#define CONFIG_SPL_SPI_BOOT -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_COMMON_INIT_DDR -#endif -#endif - -#ifdef CONFIG_NAND -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SPL_NAND_BOOT -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_ENV_SUPPORT -#define CONFIG_SPL_NAND_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -#define CONFIG_SPL_COMMON_INIT_DDR -#define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_SPL_TEXT_BASE 0xf8f81000 -#define CONFIG_SYS_MPC85XX_NO_RESETVEC -#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) -#elif defined(CONFIG_SPL_BUILD) -#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_TEXT_BASE 0xff800000 -#define CONFIG_SPL_MAX_SIZE 4096 -#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) -#endif /* not CONFIG_TPL_BUILD */ - -#define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_TPL_PAD_TO 0x20000 -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SYS_TEXT_BASE 0x11001000 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" -#endif - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ - -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#if defined(CONFIG_PCI) -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#endif /* #if defined(CONFIG_PCI) */ -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_PCI) -#define CONFIG_E1000 1 /* E1000 pci Ethernet card*/ -#endif - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1_P2 RDB */ -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for P1_P2 RDB */ - -#if defined(CONFIG_P2020) || defined(CONFIG_P1020) -#define CONFIG_MP -#endif - -#define CONFIG_HWCONFIG - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* - * Config the L2 Cache as L2 SRAM -*/ -#if defined(CONFIG_SPL_BUILD) -#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) -#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) -#if defined(CONFIG_P2020RDB) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) -#else -#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) -#endif -#elif defined(CONFIG_NAND) -#ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 -#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) -#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) -#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) -#else -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) -#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) -#endif /* CONFIG_TPL_BUILD */ -#endif -#endif - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR2 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#if defined(CONFIG_P1011RDB) || defined(CONFIG_P1020RDB) -/* - * P1020 and it's derivatives support max 32bit DDR width - * So Reduce available DDR size -*/ -#define CONFIG_SYS_SDRAM_SIZE 512 -#else -#define CONFIG_SYS_SDRAM_SIZE 1024 -#endif -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 1 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00FF0000 - -/* - * Memory map - * - * 0x0000_0000 0x3fff_ffff DDR 1G cacheablen - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xef00_0000 0xefff_ffff FLASH 16M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xef000000 /* start of FLASH 16M */ - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfef000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xff000ff7 - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_MISC_INIT_R -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ - -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_CMD_NAND -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - -#ifdef CONFIG_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif - -#define CONFIG_SYS_VSC7385_BASE 0xffb00000 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull -#else -#define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE -#endif - -#define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE) \ - | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ - OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ - OR_GPCM_EHTR | OR_GPCM_EAD) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* new uImage format support */ -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 - -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_RTC_DS1337_NOOSC -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* eSPI - Enhanced SPI */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -#if defined(CONFIG_PCI) -/* controller 2, Slot 2, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_NAME "Slot 1" -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 -#endif -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "Slot 2" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 -#endif -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP -#undef CONFIG_RTL8139 - -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION - -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define CONFIG_VSC7385_ENET - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -/* Vitesse 7385 */ - -#ifdef CONFIG_VSC7385_ENET -/* The size of the VSC7385 firmware image */ -#define CONFIG_VSC7385_IMAGE_SIZE 8192 -#endif - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#ifdef CONFIG_SPIFLASH -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) -#elif defined(CONFIG_SDCARD) -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET (512 * 0x800) -#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) -#elif defined(CONFIG_NAND) -#ifdef CONFIG_TPL_BUILD -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) -#else -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#endif -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET (1024 * 1024) -#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) -#elif defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FSL_ESDHC -#define CONFIG_GENERIC_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#ifdef CONFIG_P2020 -#define CONFIG_SYS_FSL_ESDHC_USE_PIO /* P2020 eSDHC DMA is not functional*/ -#endif -#endif - -#define CONFIG_HAS_FSL_DR_USB - -#if defined(CONFIG_HAS_FSL_DR_USB) -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#endif -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20)/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - -#define CONFIG_HOSTNAME P2020RDB -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "loadaddr=1000000\0" \ - "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ - " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ - " $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs.ext2.gz.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=p2020rdb.dtb\0" \ - "bdev=sda1\0" \ - "jffs2nor=mtdblock3\0" \ - "norbootaddr=ef080000\0" \ - "norfdtaddr=ef040000\0" \ - "jffs2nand=mtdblock9\0" \ - "nandbootaddr=100000\0" \ - "nandfdtaddr=80000\0" \ - "nandimgsize=400000\0" \ - "nandfdtsize=80000\0" \ - "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \ - "vscfw_addr=ef000000\0" \ - "othbootargs=ramdisk_size=600000\0" \ - "usbfatboot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start;" \ - "fatload usb 0:2 $loadaddr $bootfile;" \ - "fatload usb 0:2 $fdtaddr $fdtfile;" \ - "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start;" \ - "ext2load usb 0:4 $loadaddr $bootfile;" \ - "ext2load usb 0:4 $fdtaddr $fdtfile;" \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "norboot=setenv bootargs root=/dev/$jffs2nor rw " \ - "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ - "bootm $norbootaddr - $norfdtaddr\0" \ - "nandboot=setenv bootargs root=/dev/$jffs2nand rw rootfstype=jffs2 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "nand read 2000000 $nandbootaddr $nandimgsize;" \ - "nand read 3000000 $nandfdtaddr $nandfdtsize;" \ - "bootm 2000000 - 3000000;\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "usb start;" \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h deleted file mode 100644 index d414b84..0000000 --- a/include/configs/P2020COME.h +++ /dev/null @@ -1,547 +0,0 @@ -/* - * Copyright 2009-2010,2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* The P2020COME board is only booted via the Freescale On-Chip ROM */ -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC - -#define CONFIG_SYS_TEXT_BASE 0xf8f80000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc - -#ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_P2020 1 -#define CONFIG_P2020COME 1 -#define CONFIG_FSL_ELBC 1 /* Enable eLBC Support */ -#define CONFIG_MP - -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#if defined(CONFIG_PCI) -#define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ -#define CONFIG_PCIE3 1 /* PCIE controller 3 (slot 3) */ - -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#endif /* #if defined(CONFIG_PCI) */ -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_PCI) -#define CONFIG_E1000 1 /* E1000 pci Ethernet card */ -#endif - -#ifndef __ASSEMBLY__ -extern unsigned long get_board_ddr_clk(unsigned long dummy); -extern unsigned long get_board_sys_clk(unsigned long dummy); -#endif - -/* - * For P2020COME DDRCLK and SYSCLK are from the same oscillator - * For DA phase the SYSCLK is 66MHz - * For EA phase the SYSCLK is 100MHz - */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) - -#define CONFIG_HWCONFIG - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch prediction */ - -#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - - /* - * Config the L2 Cache as L2 SRAM - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR \ - + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR3 -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -#define CONFIG_SYS_SDRAM_SIZE 2048ULL /* DDR size on P2020COME */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00ff0000 - -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS 0x53 - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR3 2G Cacheable - * 0x8000_0000 0x9fff_ffff PCI Express 3 Mem 1G non-cacheable - * 0xa000_0000 0xbfff_ffff PCI Express 2 Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI Express 1 Mem 1G non-cacheable - * 0xffc1_0000 0xffc1_ffff PCI Express 3 IO 64K non-cacheable - * 0xffc2_0000 0xffc2_ffff PCI Express 2 IO 64K non-cacheable - * 0xffc3_0000 0xffc3_ffff PCI Express 1 IO 64K non-cacheable - * - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ - -/* There is no NOR Flash on P2020COME */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* the assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ - - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* new uImage format support */ -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR2 0x18 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#if defined(CONFIG_PCI) - -/* controller 3, Slot 3, tgtid 3, Base address 8000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc10000 -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, Slot 2, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 1, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc30000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP -#undef CONFIG_RTL8139 - -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#define _IO_BASE 0x00000000 -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 2 -#define TSEC3_PHY_ADDR 1 - -#undef CONFIG_VSC7385_ENET - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_RAMBOOT_SDCARD) - #define CONFIG_ENV_IS_IN_MMC 1 - #define CONFIG_FSL_FIXED_MMC_LOCATION - #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_IN_SPI_FLASH - #define CONFIG_ENV_SPI_BUS 0 - #define CONFIG_ENV_SPI_CS 0 - #define CONFIG_ENV_SPI_MAX_HZ 10000000 - #define CONFIG_ENV_SPI_MODE 0 - #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ - #define CONFIG_ENV_SECT_SIZE 0x10000 - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_NET -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FSL_ESDHC -#define CONFIG_GENERIC_MMC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#endif /* CONFIG_MMC */ - -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#endif -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* Misc Extra Settings */ -#define CONFIG_CMD_DHCP 1 - -#define CONFIG_CMD_DATE 1 -#define CONFIG_RTC_M41T62 1 -#define CONFIG_SYS_RTC_BUS_NUM 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) -#define CONFIG_SYS_BOOTM_LEN (64 << 20) - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#endif - -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ecc=on\0" \ - "bootcmd=run sdboot\0" \ - "sdboot=setenv bootargs root=/dev/mmcblk0p2 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "ext2load mmc 0:2 $loadaddr /boot/$bootfile; " \ - "ext2load mmc 0:2 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "sdfatboot=setenv bootargs root=/dev/ram rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; mmcinfo; " \ - "fatload mmc 0:1 $loadaddr $bootfile; " \ - "fatload mmc 0:1 $fdtaddr $fdtfile; " \ - "fatload mmc 0:1 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbboot=setenv bootargs root=/dev/sda1 rw " \ - "rootdelay=$rootdelaysecond console=$consoledev,$baudrate "\ - "$othbootargs; " \ - "usb start; " \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile; " \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile; " \ - "bootm $loadaddr - $fdtaddr\0" \ - "usbfatboot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "fatload usb 0:2 $loadaddr $bootfile; " \ - "fatload usb 0:2 $fdtaddr $fdtfile; " \ - "fatload usb 0:2 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "usbext2boot=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "usb start; " \ - "ext2load usb 0:4 $loadaddr $bootfile; " \ - "ext2load usb 0:4 $fdtaddr $fdtfile; " \ - "ext2load usb 0:4 $ramdiskaddr $ramdiskfile; " \ - "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ - "upgradespi=sf probe 0; " \ - "setenv startaddr 0; " \ - "setenv erasesize a0000; " \ - "tftp 1000000 $tftppath/$uboot_spi; " \ - "sf erase $startaddr $erasesize; " \ - "sf write 1000000 $startaddr $filesize; " \ - "sf erase 100000 120000\0" \ - "clearspienv=sf probe 0;sf erase 100000 20000\0" \ - "othbootargs=ramdisk_size=700000 cache-sram-size=0x10000\0" \ - "netdev=eth0\0" \ - "rootdelaysecond=15\0" \ - "uboot_nor=u-boot-nor.bin\0" \ - "uboot_spi=u-boot-p2020.spi\0" \ - "uboot_sd=u-boot-p2020.bin\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=rootfs-dev.ext2.img\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=uImage-2.6.32-p2020.dtb\0" \ - "tftppath=p2020\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "usb start;" \ - "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ - "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $tftppath/$ramdiskfile;" \ - "tftp $loadaddr $tftppath/$bootfile;" \ - "tftp $fdtaddr $tftppath/$fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h deleted file mode 100644 index 820b633..0000000 --- a/include/configs/P2020DS.h +++ /dev/null @@ -1,751 +0,0 @@ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * p2020ds board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "../board/freescale/common/ics307_clk.h" - -#ifdef CONFIG_36BIT -#define CONFIG_PHYS_64BIT -#endif - -#ifdef CONFIG_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f40000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -#ifdef CONFIG_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0xf8f40000 -#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_P2020 1 -#define CONFIG_P2020DS 1 -#define CONFIG_MP 1 /* support multiple processors */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ - -#define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ -#define CONFIG_PCI 1 /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ -#define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ -#define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ -#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ - -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP 1 -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ -#endif - -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* - * Config the L2 Cache - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull -#else -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -/* DDR Setup */ -#define CONFIG_VERY_BIG_RAM -#ifdef CONFIG_DDR2 -#define CONFIG_SYS_FSL_DDR2 -#else -#define CONFIG_SYS_FSL_DDR3 1 -#endif - -/* ECC will be enabled based on perf_mode environment variable */ -/* #define CONFIG_DDR_ECC */ - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define CONFIG_DDR_SPD -#define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD EEPROM located on I2C bus 0 */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1GB */ - -/* Default settings for "stable" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00330804 -#define CONFIG_SYS_DDR_TIMING_1 0x6f6b4846 -#define CONFIG_SYS_DDR_TIMING_2 0x0fa890d4 -#define CONFIG_SYS_DDR_MODE_1 0x00421422 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x61800100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x02000000 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8655A608 -#define CONFIG_SYS_DDR_CONTROL 0xE7000000 /* Type = DDR3: ECC enabled, No Interleaving */ -#define CONFIG_SYS_DDR_CONTROL2 0x24400011 -#define CONFIG_SYS_DDR_CDR1 0x00040000 -#define CONFIG_SYS_DDR_CDR2 0x00000000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00010000 - -/* Settings that differ for "performance" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014202 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x5d5b4543 -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x0fa890ce -#define CONFIG_SYS_DDR_CONTROL_PERF 0xC7004000 /* Type = DDR3: ECC disabled, cs0-cs1 interleaving */ - -/* - * The following set of values were tested for DDR2 - * with a DDR3 to DDR2 interposer - * -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3935d322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 -#define CONFIG_SYS_DDR_MODE_1 0x00480432 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x06180100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC3008000 -#define CONFIG_SYS_DDR_CONTROL2 0x04400010 - * - */ - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable - * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - * - * Localbus cacheable (TBD) - * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable - * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_FLASH_BR_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 - -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ - -#define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ - -#ifdef CONFIG_FSL_NGPIXIS -#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ -#ifdef CONFIG_PHYS_64BIT -#define PIXIS_BASE_PHYS 0xfffdf0000ull -#else -#define PIXIS_BASE_PHYS PIXIS_BASE -#endif - -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - -#define PIXIS_LBMAP_SWITCH 7 -#define PIXIS_LBMAP_MASK 0xf0 -#define PIXIS_LBMAP_SHIFT 4 -#define PIXIS_LBMAP_ALTBANK 0x20 -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ - -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ - CONFIG_SYS_NAND_BASE + 0x40000, \ - CONFIG_SYS_NAND_BASE + 0x80000,\ - CONFIG_SYS_NAND_BASE + 0xC0000} -#define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ - | OR_FCM_PGS /* Large Page*/ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI - -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION - -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 3, Slot 1, tgtid 3, Base address b000 */ -#define CONFIG_SYS_PCIE3_NAME "Slot 1" -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#endif -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 -#endif -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, direct to uli, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_NAME "ULI" -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 -#endif -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 2, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "Slot 2" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 -#endif -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#if defined(CONFIG_PCI) - -/*PCIE video card used*/ -#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT - -/* video */ -#undef CONFIG_VIDEO - -#if defined(CONFIG_VIDEO) -#define CONFIG_BIOSEMU -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_ATI_RADEON_FB -#define CONFIG_VIDEO_LOGO -/*#define CONFIG_CONSOLE_CURSOR*/ -#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET -#endif - -/* SRIO1 uses the same window as PCIE2 mem window */ -#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 -#endif -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -/* SRIO2 uses the same window as PCIE1 mem window */ -#define CONFIG_SYS_SRIO2_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc0000000 -#endif -#define CONFIG_SYS_SRIO2_MEM_SIZE 0x20000000 /* 512M */ - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION -#define CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_LIBATA -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE -#endif /* SCSI */ - -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define CONFIG_FSL_SGMII_RISER 1 -#define SGMII_RISER_PHY_OFFSET 0x1b - -#ifdef CONFIG_FSL_SGMII_RISER -#define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ -#endif - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#if defined(CONFIG_SDCARD) -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_SPIFLASH) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#define CONFIG_CMD_SCSI -#define CONFIG_CMD_EXT2 -#endif - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif -#endif - -/* - * SDHC/MMC - */ -#define CONFIG_MMC - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#endif - -#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#endif - -#define CONFIG_IPADDR 192.168.1.254 - -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ -"perf_mode=performance\0" \ - "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=ulpi\0" \ -"netdev=eth0\0" \ -"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ - "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ -"satabootcmd=setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" \ -"consoledev=ttyS0\0" \ -"ramdiskaddr=2000000\0" \ -"ramdiskfile=p2020ds/ramdisk.uboot\0" \ -"fdtaddr=c00000\0" \ -"othbootargs=cache-sram-size=0x10000\0" \ -"fdtfile=p2020ds/p2020ds.dtb\0" \ -"bdev=sda3\0" \ -"partition=scsi 0:0\0" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "ext2load $partition $loadaddr $bootfile;" \ - "ext2load $partition $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT - -#endif /* __CONFIG_H */ diff --git a/include/configs/PM520.h b/include/configs/PM520.h deleted file mode 100644 index de46216..0000000 --- a/include/configs/PM520.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 -#define CONFIG_PM520 1 /* PM520 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#undef CONFIG_NS8382X - - -/* Partitions */ -#define CONFIG_DOS_PARTITION - -/* USB */ -#if 1 -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP -#define CONFIG_CMD_USB - -#define CONFIG_CMD_PCI - - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=pm520\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk30/ppc_82xx\0" \ - "bootfile=/tftpboot/PM520/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -#define CONFIG_SYS_DOC_BASE 0xE0000000 -#define CONFIG_SYS_DOC_SIZE 0x00100000 - -#if defined(CONFIG_BOOT_ROM) -/* - * Flash configuration (8,16 or 32 MB) - * TEXT base always at 0xFFF00000 - * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFA000000 for 64 MB - * 0xFC000000 for 32 MB - * 0xFD000000 for 16 MB - * 0xFD800000 for 8 MB - */ -#define CONFIG_SYS_FLASH_BASE 0xFA000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 -#define CONFIG_SYS_BOOTROM_BASE 0xFFF00000 -#define CONFIG_SYS_BOOTROM_SIZE 0x00080000 -#define CONFIG_ENV_ADDR (0xFDF00000 + 0x40000) -#else -/* - * Flash configuration (8,16 or 32 MB) - * TEXT base always at 0xFFF00000 - * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFC000000 for 64 MB - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB - */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 -#define CONFIG_ENV_ADDR (0xFFF00000 + 0x40000) -#endif -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ - -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#undef CONFIG_FLASH_16BIT /* Flash is 32-bit */ - - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10000004 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#if defined(CONFIG_BOOT_ROM) -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTROM_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_BOOTROM_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047800 -#define CONFIG_SYS_CS0_START CONFIG_SYS_BOOTROM_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_BOOTROM_SIZE -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_CFG 0x0004FF00 -#else -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0004FF00 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_START CONFIG_SYS_DOC_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_DOC_SIZE -#define CONFIG_SYS_CS1_CFG 0x00047800 -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00005000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#undef CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h deleted file mode 100644 index e277d0d..0000000 --- a/include/configs/PPChameleonEVB.h +++ /dev/null @@ -1,777 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2003 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * Credits: Stefan Roese, Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PPCHAMELEON_MODULE_BA 0 /* Basic Model */ -#define CONFIG_PPCHAMELEON_MODULE_ME 1 /* Medium Model */ -#define CONFIG_PPCHAMELEON_MODULE_HI 2 /* High-End Model */ -#ifndef CONFIG_PPCHAMELEON_MODULE_MODEL -#define CONFIG_PPCHAMELEON_MODULE_MODEL CONFIG_PPCHAMELEON_MODULE_BA -#endif - - -/* Only one of the following two symbols must be defined (default is 25 MHz) - * CONFIG_PPCHAMELEON_CLK_25 - * CONFIG_PPCHAMELEON_CLK_33 - */ -#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33)) -#define CONFIG_PPCHAMELEON_CLK_25 -#endif - -#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33)) -#error "* Two external frequencies (SysClk) are defined! *" -#endif - -#undef CONFIG_PPCHAMELEON_SMI712 - -/* - * Debug stuff - */ -#undef __DEBUG_START_FROM_SRAM__ -#define __DISABLE_MACHINE_EXCEPTION__ - -#ifdef __DEBUG_START_FROM_SRAM__ -#define CONFIG_SYS_DUMMY_FLASH_SIZE 1024*1024*4 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405EP 1 /* This is a PPC405 CPU */ -#define CONFIG_PPCHAMELEONEVB 1 /* ...on a PPChameleonEVB board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFB0000 /* Reserve 320 kB for Monitor */ -#define CONFIG_SYS_LDSCRIPT "board/dave/PPChameleonEVB/u-boot.lds" - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ - - -#ifdef CONFIG_PPCHAMELEON_CLK_25 -# define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ -#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) -# define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#else -# error "* External frequency (SysClk) not defined! *" -#endif - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#undef CONFIG_BOOTARGS - -/* Ethernet stuff */ -#define CONFIG_ENV_OVERWRITE /* Let the user to change the Ethernet MAC addresses */ -#define CONFIG_ETHADDR 00:50:c2:1e:af:fe -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:50:c2:1e:af:fd - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#undef CONFIG_EXT_PHY - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#ifndef CONFIG_EXT_PHY -#define CONFIG_PHY_ADDR 1 /* EMAC0 PHY address */ -#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */ -#else -#define CONFIG_PHY_ADDR 2 /* PHY address */ -#endif -#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_RTC_M41T11 1 /* uses a M41T00 RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 - -/* - * SDRAM configuration (please see cpu/ppc/sdram.[ch]) - */ -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* SDRAM timings used in datasheet */ -#define CONFIG_SYS_SDRAM_CL 2 -#define CONFIG_SYS_SDRAM_tRP 20 -#define CONFIG_SYS_SDRAM_tRC 65 -#define CONFIG_SYS_SDRAM_tRCD 20 -#undef CONFIG_SYS_SDRAM_tRFC - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * NAND-FLASH stuff - *----------------------------------------------------------------------- - */ - -/* - * nand device 1 on dave (PPChameleonEVB) needs more time, - * so we just introduce additional wait in nand_wait(), - * effectively for both devices. - */ -#define PPCHAMELON_NAND_TIMER_HACK - -#define CONFIG_SYS_NAND0_BASE 0xFF400000 -#define CONFIG_SYS_NAND1_BASE 0xFF000000 -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE, CONFIG_SYS_NAND1_BASE } -#define NAND_BIG_DELAY_US 25 -#define CONFIG_SYS_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ - -#define CONFIG_SYS_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ -#define CONFIG_SYS_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ -#define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ -#define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ - -#define CONFIG_SYS_NAND1_CE (0x80000000 >> 14) /* our CE is GPIO14 */ -#define CONFIG_SYS_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define CONFIG_SYS_NAND1_CLE (0x80000000 >> 15) /* our CLE is GPIO15 */ -#define CONFIG_SYS_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ - -#define MACRO_NAND_DISABLE_CE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_ENABLE_CE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_CLRALE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_ALE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_ALE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_SETALE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_ALE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_ALE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ -{ \ - switch((unsigned long)nandptr) \ - { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND0_CLE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND1_CLE); \ - break; \ - } \ -} while(0) - -#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ - switch((unsigned long)nandptr) { \ - case CONFIG_SYS_NAND0_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND0_CLE); \ - break; \ - case CONFIG_SYS_NAND1_BASE: \ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND1_CLE); \ - break; \ - } \ -} while(0) - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#undef CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ - -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* PCI Vendor ID: IBM */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: --- */ -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ - -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* Reserve 256 kB for Monitor */ -/* -#define CONFIG_SYS_FLASH_BASE 0xFFFC0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -*/ - -/* Reserve 320 kB for Monitor */ -#define CONFIG_SYS_FLASH_BASE 0xFFFB0000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MONITOR_LEN (320 * 1024) - -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -/*----------------------------------------------------------------------- - * Environment Variable setup - */ -#ifdef ENVIRONMENT_IN_EEPROM - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x700 /* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/ - -#else /* DEFAULT: environment in flash, using redundand flash sectors */ - -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#define CONFIG_ENV_ADDR 0xFFFF8000 /* environment starts at the first small sector */ -#define CONFIG_ENV_SECT_SIZE 0x2000 /* 8196 bytes may be used for env vars*/ -#define CONFIG_ENV_ADDR_REDUND 0xFFFFA000 -#define CONFIG_ENV_SIZE_REDUND 0x2000 - -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -#endif /* ENVIRONMENT_IN_EEPROM */ - - -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */ - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC16) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ - /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (External SRAM) initialization */ -/* Since this must replace NOR Flash, we use the same settings for CS0 */ -#define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (Flash Bank 1, NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x92015480 -#define CONFIG_SYS_EBC_PB2CR 0xFF458000 /* BAS=0xFF4,BS=4MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (Flash Bank 2, NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x92015480 -#define CONFIG_SYS_EBC_PB3CR 0xFF058000 /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit */ - -#ifdef CONFIG_PPCHAMELEON_SMI712 -/* - * Video console (graphic: SMI LynxEM) - */ -#define CONFIG_VIDEO -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_SMI_LYNXEM -#define CONFIG_VIDEO_LOGO -/*#define CONFIG_VIDEO_BMP_LOGO*/ -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */ -#define CONFIG_SYS_ISA_IO 0xE8000000 -/* see also drivers/video/videomodes.c */ -#define CONFIG_SYS_DEFAULT_VIDEO_MODE 0x303 -#endif - -/*----------------------------------------------------------------------- - * FPGA stuff - */ -/* FPGA internal regs */ -#define CONFIG_SYS_FPGA_MODE 0x00 -#define CONFIG_SYS_FPGA_STATUS 0x02 -#define CONFIG_SYS_FPGA_TS 0x04 -#define CONFIG_SYS_FPGA_TS_LOW 0x06 -#define CONFIG_SYS_FPGA_TS_CAP0 0x10 -#define CONFIG_SYS_FPGA_TS_CAP0_LOW 0x12 -#define CONFIG_SYS_FPGA_TS_CAP1 0x14 -#define CONFIG_SYS_FPGA_TS_CAP1_LOW 0x16 -#define CONFIG_SYS_FPGA_TS_CAP2 0x18 -#define CONFIG_SYS_FPGA_TS_CAP2_LOW 0x1a -#define CONFIG_SYS_FPGA_TS_CAP3 0x1c -#define CONFIG_SYS_FPGA_TS_CAP3_LOW 0x1e - -/* FPGA Mode Reg */ -#define CONFIG_SYS_FPGA_MODE_CF_RESET 0x0001 -#define CONFIG_SYS_FPGA_MODE_TS_IRQ_ENABLE 0x0100 -#define CONFIG_SYS_FPGA_MODE_TS_IRQ_CLEAR 0x1000 -#define CONFIG_SYS_FPGA_MODE_TS_CLEAR 0x2000 - -/* FPGA Status Reg */ -#define CONFIG_SYS_FPGA_STATUS_DIP0 0x0001 -#define CONFIG_SYS_FPGA_STATUS_DIP1 0x0002 -#define CONFIG_SYS_FPGA_STATUS_DIP2 0x0004 -#define CONFIG_SYS_FPGA_STATUS_FLASH 0x0008 -#define CONFIG_SYS_FPGA_STATUS_TS_IRQ 0x1000 - -#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */ -#define CONFIG_SYS_FPGA_MAX_SIZE 128*1024 /* 128kByte is enough for XC2S50E*/ - -/* FPGA program pin configuration */ -#define CONFIG_SYS_FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */ -#define CONFIG_SYS_FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */ -#define CONFIG_SYS_FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */ -#define CONFIG_SYS_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */ -#define CONFIG_SYS_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in data cache) - */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ -#define CONFIG_SYS_TEMP_STACK_OCM 1 - -/* On Chip Memory location */ -#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 -#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Definitions for GPIO setup (PPC405EP specific) - * - * GPIO0[0] - External Bus Controller BLAST output - * GPIO0[1-9] - Instruction trace outputs -> GPIO - * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs - * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO - * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs - * GPIO0[24-27] - UART0 control signal inputs/outputs - * GPIO0[28-29] - UART1 data signal input/output - * GPIO0[30] - EMAC0 input - * GPIO0[31] - EMAC1 reject packet as output - */ -#define CONFIG_SYS_GPIO0_OSRL 0x40000550 -#define CONFIG_SYS_GPIO0_OSRH 0x00000110 -#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 -/*#define CONFIG_SYS_GPIO0_ISR1H 0x15555445*/ -#define CONFIG_SYS_GPIO0_ISR1H 0x15555444 -#define CONFIG_SYS_GPIO0_TSRL 0x00000000 -#define CONFIG_SYS_GPIO0_TSRH 0x00000000 -#define CONFIG_SYS_GPIO0_TCR 0xF7FF8014 - -#define CONFIG_NO_SERIAL_EEPROM - -/*--------------------------------------------------------------------*/ - -#ifdef CONFIG_NO_SERIAL_EEPROM - -/* -!----------------------------------------------------------------------- -! Defines for entry options. -! Note: Because the 405EP SDRAM controller does not support ECC, ECC DIMMs that -! are plugged in the board will be utilized as non-ECC DIMMs. -!----------------------------------------------------------------------- -*/ -#undef AUTO_MEMORY_CONFIG -#define DIMM_READ_ADDR 0xAB -#define DIMM_WRITE_ADDR 0xAA - -/* Defines for CPC0_PLLMR1 Register fields */ -#define PLL_ACTIVE 0x80000000 -#define CPC0_PLLMR1_SSCS 0x80000000 -#define PLL_RESET 0x40000000 -#define CPC0_PLLMR1_PLLR 0x40000000 - /* Feedback multiplier */ -#define PLL_FBKDIV 0x00F00000 -#define CPC0_PLLMR1_FBDV 0x00F00000 -#define PLL_FBKDIV_16 0x00000000 -#define PLL_FBKDIV_1 0x00100000 -#define PLL_FBKDIV_2 0x00200000 -#define PLL_FBKDIV_3 0x00300000 -#define PLL_FBKDIV_4 0x00400000 -#define PLL_FBKDIV_5 0x00500000 -#define PLL_FBKDIV_6 0x00600000 -#define PLL_FBKDIV_7 0x00700000 -#define PLL_FBKDIV_8 0x00800000 -#define PLL_FBKDIV_9 0x00900000 -#define PLL_FBKDIV_10 0x00A00000 -#define PLL_FBKDIV_11 0x00B00000 -#define PLL_FBKDIV_12 0x00C00000 -#define PLL_FBKDIV_13 0x00D00000 -#define PLL_FBKDIV_14 0x00E00000 -#define PLL_FBKDIV_15 0x00F00000 - /* Forward A divisor */ -#define PLL_FWDDIVA 0x00070000 -#define CPC0_PLLMR1_FWDVA 0x00070000 -#define PLL_FWDDIVA_8 0x00000000 -#define PLL_FWDDIVA_7 0x00010000 -#define PLL_FWDDIVA_6 0x00020000 -#define PLL_FWDDIVA_5 0x00030000 -#define PLL_FWDDIVA_4 0x00040000 -#define PLL_FWDDIVA_3 0x00050000 -#define PLL_FWDDIVA_2 0x00060000 -#define PLL_FWDDIVA_1 0x00070000 - /* Forward B divisor */ -#define PLL_FWDDIVB 0x00007000 -#define CPC0_PLLMR1_FWDVB 0x00007000 -#define PLL_FWDDIVB_8 0x00000000 -#define PLL_FWDDIVB_7 0x00001000 -#define PLL_FWDDIVB_6 0x00002000 -#define PLL_FWDDIVB_5 0x00003000 -#define PLL_FWDDIVB_4 0x00004000 -#define PLL_FWDDIVB_3 0x00005000 -#define PLL_FWDDIVB_2 0x00006000 -#define PLL_FWDDIVB_1 0x00007000 - /* PLL tune bits */ -#define PLL_TUNE_MASK 0x000003FF -#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ -#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ -#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ -#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ -#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ -#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ -#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ - -/* Defines for CPC0_PLLMR0 Register fields */ - /* CPU divisor */ -#define PLL_CPUDIV 0x00300000 -#define CPC0_PLLMR0_CCDV 0x00300000 -#define PLL_CPUDIV_1 0x00000000 -#define PLL_CPUDIV_2 0x00100000 -#define PLL_CPUDIV_3 0x00200000 -#define PLL_CPUDIV_4 0x00300000 - /* PLB divisor */ -#define PLL_PLBDIV 0x00030000 -#define CPC0_PLLMR0_CBDV 0x00030000 -#define PLL_PLBDIV_1 0x00000000 -#define PLL_PLBDIV_2 0x00010000 -#define PLL_PLBDIV_3 0x00020000 -#define PLL_PLBDIV_4 0x00030000 - /* OPB divisor */ -#define PLL_OPBDIV 0x00003000 -#define CPC0_PLLMR0_OPDV 0x00003000 -#define PLL_OPBDIV_1 0x00000000 -#define PLL_OPBDIV_2 0x00001000 -#define PLL_OPBDIV_3 0x00002000 -#define PLL_OPBDIV_4 0x00003000 - /* EBC divisor */ -#define PLL_EXTBUSDIV 0x00000300 -#define CPC0_PLLMR0_EPDV 0x00000300 -#define PLL_EXTBUSDIV_2 0x00000000 -#define PLL_EXTBUSDIV_3 0x00000100 -#define PLL_EXTBUSDIV_4 0x00000200 -#define PLL_EXTBUSDIV_5 0x00000300 - /* MAL divisor */ -#define PLL_MALDIV 0x00000030 -#define CPC0_PLLMR0_MPDV 0x00000030 -#define PLL_MALDIV_1 0x00000000 -#define PLL_MALDIV_2 0x00000010 -#define PLL_MALDIV_3 0x00000020 -#define PLL_MALDIV_4 0x00000030 - /* PCI divisor */ -#define PLL_PCIDIV 0x00000003 -#define CPC0_PLLMR0_PPFD 0x00000003 -#define PLL_PCIDIV_1 0x00000000 -#define PLL_PCIDIV_2 0x00000001 -#define PLL_PCIDIV_3 0x00000002 -#define PLL_PCIDIV_4 0x00000003 - -#ifdef CONFIG_PPCHAMELEON_CLK_25 -/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 25.0 MHz input clock to the 405EP) */ -#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_6 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_2) -#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) - -#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) - -/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */ -#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \ - PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ - PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ - PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) - -#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ - PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ - PLL_MALDIV_1 | PLL_PCIDIV_2) -#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ - PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ - PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) - -#else -#error "* External frequency (SysClk) not defined! *" -#endif - -#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI) -/* Model HI */ -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_333_111_37_55_55 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_333_111_37_55_55 -#define CONFIG_SYS_OPB_FREQ 55555555 -/* Model ME */ -#elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_266_133_33_66_33 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_266_133_33_66_33 -#define CONFIG_SYS_OPB_FREQ 66666666 -#else -/* Model BA (default) */ -#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_133_133_33_66_33 -#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_133_133_33_66_33 -#define CONFIG_SYS_OPB_FREQ 66666666 -#endif - -#endif /* CONFIG_NO_SERIAL_EEPROM */ - -#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ -#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */ - -/* - * JFFS2 partitions - */ - -/* No command line, one static partition */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=PPChameleon-0,nand0=ppchameleonevb-nand" -*/ - -/* 256 kB U-boot image */ -/* -#define MTDPARTS_DEFAULT "mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \ - "1792k(user),256k(u-boot);" \ - "ppchameleonevb-nand:-(nand)" -*/ - -/* 320 kB U-boot image */ -/* -#define MTDPARTS_DEFAULT "mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \ - "1728k(user),320k(u-boot);" \ - "ppchameleonevb-nand:-(nand)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index c2bdbb9..3f02ced 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -35,7 +35,10 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 82b669b..bd40d6a 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -36,7 +36,10 @@ /* support deep sleep */ #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg @@ -51,7 +54,7 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_FSL_LAW /* Use common FSL init code */ -#define CONFIG_SYS_TEXT_BASE 0x00201000 +#define CONFIG_SYS_TEXT_BASE 0x30001000 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 #define CONFIG_SPL_PAD_TO 0x40000 #define CONFIG_SPL_MAX_SIZE 0x28000 @@ -67,21 +70,21 @@ #ifdef CONFIG_NAND #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 +#define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #define CONFIG_SPL_NAND_BOOT #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD @@ -91,12 +94,12 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC +#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" #ifndef CONFIG_SPL_BUILD @@ -759,8 +762,10 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB_10G #define CONFIG_PHY_REALTEK +#define CONFIG_PHY_AQUANTIA #define RGMII_PHY1_ADDR 0x2 #define RGMII_PHY2_ADDR 0x6 +#define SGMII_PHY1_ADDR 0x2 #define FM1_10GEC1_PHY_ADDR 0x1 #endif diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index b70bdfe..92f5f56 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -47,7 +47,10 @@ /* support deep sleep */ #define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) #define CONFIG_SILENT_CONSOLE +#define CONFIG_BOARD_EARLY_INIT_F +#endif #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xeff40000 @@ -689,6 +692,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ #endif +/* Enable VSC9953 L2 Switch driver */ +#define CONFIG_VSC9953 +#define CONFIG_VSC9953_CMD +#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 +#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 + /* * Dynamic MTD Partition support with mtdparts */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 57cdf72..d47f1be 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -726,6 +726,14 @@ #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 +/* Enable VSC9953 L2 Switch driver on T1040 SoC */ +#ifdef CONFIG_T1040RDB +#define CONFIG_VSC9953 +#define CONFIG_VSC9953_CMD +#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 +#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 +#endif + #define CONFIG_MII /* MII PHY management */ #define CONFIG_ETHPRIME "FM1@DTSEC4" #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h deleted file mode 100644 index a58eeca..0000000 --- a/include/configs/Total5200.h +++ /dev/null @@ -1,386 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Check valid setting of revision define. - * Total5100 and Total5200 Rev.1 are identical except for the processor. - */ -#if (CONFIG_TOTAL5200_REV!=1 && CONFIG_TOTAL5200_REV!=2) -#error CONFIG_TOTAL5200_REV must be 1 or 2 -#endif - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFE000000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Video console - */ -#define CONFIG_VIDEO -#define CONFIG_VIDEO_SED13806 -#define CONFIG_VIDEO_SED13806_16BPP - -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -/* #define CONFIG_VIDEO_BMP_LOGO */ -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_SPLASH_SCREEN - - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* USB */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI - -#define CONFIG_CMD_BMP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - - -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT \ - "setenv stdout serial;setenv stderr serial;" \ - "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/MPC5200/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if CONFIG_TOTAL5200_REV==2 -# define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS5_START, CONFIG_SYS_CS4_START, CONFIG_SYS_BOOTCS_START } -#else -# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } -#endif -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#if CONFIG_TOTAL5200_REV==1 -# define CONFIG_SYS_FLASH_BASE 0xFE000000 -# define CONFIG_SYS_FLASH_SIZE 0x02000000 -#elif CONFIG_TOTAL5200_REV==2 -# define CONFIG_SYS_FLASH_BASE 0xFA000000 -# define CONFIG_SYS_FLASH_SIZE 0x06000000 -#endif /* CONFIG_TOTAL5200_REV */ - -#if defined(CONFIG_SYS_LOWBOOT) -# define CONFIG_ENV_ADDR 0xFE040000 -#else /* CONFIG_SYS_LOWBOOT */ -# define CONFIG_ENV_ADDR 0xFFF40000 -#endif /* CONFIG_SYS_LOWBOOT */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_MBAR 0xF0000000 /* 64 kB */ -#define CONFIG_SYS_FPGA_BASE 0xF0010000 /* 64 kB */ -#define CONFIG_SYS_CPLD_BASE 0xF0020000 /* 64 kB */ -#define CONFIG_SYS_LCD_BASE 0xF1000000 /* 4096 kB */ - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_SEVENWIRE -/* dummy, 7-wire FEC does not have phy address */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - * - * CS1: SDRAM CS1 disabled, gpio_wkup_6 enabled 0 - * Reserved 0 - * ALTs: CAN1/2 on PSC2, SPI on PSC3 00 - * CS7: Interrupt GPIO on PSC3_5 0 - * CS8: Interrupt GPIO on PSC3_4 0 - * ATA: reset default, changed in ATA driver 00 - * IR_USB_CLK: IrDA/USB 48MHz clock gen. int., pin is GPIO 0 - * IRDA: reset default, changed in IrDA driver 000 - * ETHER: reset default, changed in Ethernet driver 0000 - * PCI_DIS: reset default, changed in PCI driver 0 - * USB_SE: reset default, changed in USB driver 0 - * USB: reset default, changed in USB driver 00 - * PSC3: SPI and UART functionality without CD 1100 - * Reserved 0 - * PSC2: CAN1/2 001 - * Reserved 0 - * PSC1: reset default, changed in AC'97 driver 000 - * - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00000C10 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#if CONFIG_TOTAL5200_REV==1 -# define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */ -# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_CS0_SIZE 0x02000000 /* 32 MB */ -#else -# define CONFIG_SYS_BOOTCS_START (CONFIG_SYS_CS4_START + CONFIG_SYS_CS4_SIZE) -# define CONFIG_SYS_BOOTCS_SIZE 0x02000000 /* 32 MB */ -# define CONFIG_SYS_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CONFIG_SYS_CS4_START (CONFIG_SYS_CS5_START + CONFIG_SYS_CS5_SIZE) -# define CONFIG_SYS_CS4_SIZE 0x02000000 /* 32 MB */ -# define CONFIG_SYS_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -# define CONFIG_SYS_CS5_START CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_CS5_SIZE 0x02000000 /* 32 MB */ -# define CONFIG_SYS_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */ -#endif - -#define CONFIG_SYS_CS1_START CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_CS1_SIZE 0x00010000 /* 64 kB */ -#define CONFIG_SYS_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */ - -#define CONFIG_SYS_CS2_START CONFIG_SYS_LCD_BASE -#define CONFIG_SYS_CS2_SIZE 0x00400000 /* 4096 kB */ -#define CONFIG_SYS_CS2_CFG 0x0032FD0C /* 50WS, MX, AL, AA, CE, AS_25, DS_16, endian swapping */ - -#if CONFIG_TOTAL5200_REV==1 -# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE -# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */ -# define CONFIG_SYS_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */ -#else -# define CONFIG_SYS_CS3_START CONFIG_SYS_CPLD_BASE -# define CONFIG_SYS_CS3_SIZE 0x00010000 /* 64 kB */ -# define CONFIG_SYS_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */ -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_CS_ON_I2C2 -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 0004750..f1c270c 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -19,13 +19,11 @@ #include <configs/ti_am335x_common.h> #ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_FIT # define CONFIG_FIT +#endif # define CONFIG_TIMESTAMP # define CONFIG_LZO -# ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_FIT_SIGNATURE -# define CONFIG_RSA -# endif #endif #define CONFIG_SYS_BOOTM_LEN (16 << 20) @@ -239,6 +237,7 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) /* NAND: driver related configs */ #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_GPMC_PREFETCH #define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ diff --git a/include/configs/arcangel4-be.h b/include/configs/arcangel4-be.h deleted file mode 100644 index 76163ab..0000000 --- a/include/configs/arcangel4-be.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_ARCANGEL4_H_ -#define _CONFIG_ARCANGEL4_H_ - -/* - * CPU configuration - */ -#define CONFIG_SYS_BIG_ENDIAN -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ - -/* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - -/* - * Memory configuration - */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ -#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - -#define CONFIG_SYS_NO_FLASH - -/* - * UART configuration - * - */ -#define CONFIG_ARC_SERIAL -#define CONFIG_ARC_UART_BASE 0xC0FC1000 -#define CONFIG_BAUDRATE 115200 - -/* - * Command line configuration - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ELF - -#define CONFIG_OF_LIBFDT - -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ -#define CONFIG_ENV_OFFSET 0 - -/* - * Environment configuration - */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -/* - * Console configuration - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "arcangel4# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h index 81934a4..5e4097f 100644 --- a/include/configs/arcangel4.h +++ b/include/configs/arcangel4.h @@ -10,23 +10,11 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 64 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ /* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/arndale.h b/include/configs/arndale.h index d68993b..3ad4a9b 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -51,8 +51,6 @@ /* PMIC */ #define CONFIG_PMIC #define CONFIG_POWER_I2C -#define CONFIG_POWER_MAX77686 - #define CONFIG_PREBOOT diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index a6a80de..c4b2e16 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -90,7 +90,6 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1 @@ -133,14 +132,17 @@ # define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK #endif -/* DataFlash */ #ifndef CONFIG_AT91SAM9G20EK_2MMC +/* DataFlash */ #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 +#else +/* Enable MMC. The MCCK is conflicted with DataFlash */ +#define CONFIG_CMD_MMC #endif #ifdef CONFIG_AT91SAM9G20EK diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index b1d4baa..6d8b71d 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -203,11 +203,12 @@ "bootm 0x22000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #endif #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/axs101.h b/include/configs/axs101.h index c61ddd6..5fb8aca 100644 --- a/include/configs/axs101.h +++ b/include/configs/axs101.h @@ -10,22 +10,8 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ -/* NAND controller DMA doesn't work correctly with D$ enabled */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - #define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 #define ARC_APB_PERIPHERAL_BASE 0xF0000000 #define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) @@ -34,7 +20,6 @@ /* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 39982ef..2e0e922 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -97,7 +97,7 @@ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x12000 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED diff --git a/include/configs/chromebook_link.h b/include/configs/chromebook_link.h index 7e6d239..7b460e8 100644 --- a/include/configs/chromebook_link.h +++ b/include/configs/chromebook_link.h @@ -20,6 +20,7 @@ #define CONFIG_DCACHE_RAM_MRC_VAR_SIZE 0x4000 #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R #define CONFIG_NR_DRAM_BANKS 8 #define CONFIG_X86_MRC_ADDR 0xfffa0000 @@ -63,6 +64,13 @@ #define CONFIG_CMD_CROS_EC #define CONFIG_ARCH_EARLY_INIT_R +#undef CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x003f8000 + #define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ "stdout=vga,serial\0" \ "stderr=vga,serial\0" diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 5b50c1d..ace511f 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -18,6 +18,7 @@ #define MACH_TYPE_CORVUS 2066 +#define CONFIG_MACH_TYPE MACH_TYPE_CORVUS #define CONFIG_SYS_GENERIC_BOARD /* * Warning: changing CONFIG_SYS_TEXT_BASE requires @@ -106,6 +107,7 @@ /* our CLE is AD22 */ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 #endif /* Ethernet */ @@ -171,7 +173,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE @@ -184,7 +185,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_SIZE (256*1024*1024) #define CONFIG_SYS_NAND_PAGE_SIZE 2048 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h deleted file mode 100644 index ec926fd..0000000 --- a/include/configs/cpci5200.h +++ /dev/null @@ -1,390 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - - */ - -/************************************************************************* - * (c) 2005 esd gmbh Hannover - * - * - * from IceCube.h file - * by Reinhard Arlt reinhard.arlt@esd-electronics.com - * - *************************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_ICECUBE 1 /* ... on IceCube board */ -#define CONFIG_CPCI5200 1 /* ... on CPCI5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#if 1 -#define CONFIG_PCI 1 -#if 1 -#define CONFIG_PCI_PNP 1 -#endif -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_MII -#if 0 /* test-only !!! */ -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* USB */ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_I2C -#define CONFIG_CMD_BSP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_DATE - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#endif -#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT08 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Welcome to esd CPU CPCI/5200;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=phypower 1;sleep 2;tftp ${loadaddr} ${image};run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)${host}:${image} h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script}\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script} o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=cpci5200.esd\0" \ - "script=cpci5200.bat\0" \ - "image=/tftpboot/vxWorks_cpci5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_vxworks0" - -#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfd010000 -#define CONFIG_SYS_NVRAM_SIZE 32*1024 - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 86000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -/* - * Flash configuration - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00000000) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/* - * Environment settings - */ -#if 1 /* test-only */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 -#else -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars */ - /* total size of a CAT24WC32 is 8192 bytes */ -#define CONFIG_ENV_OVERWRITE 1 -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_FEC_10MBIT to force FEC at 10Mb - */ -/* #define CONFIG_FEC_10MBIT 1 */ -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_UDP_CHECKSUM 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x01052444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0004DD00 - -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS1_START 0xfd000000 -#define CONFIG_SYS_CS1_SIZE 0x00010000 -#define CONFIG_SYS_CS1_CFG 0x10101410 - -#define CONFIG_SYS_CS3_START 0xfd010000 -#define CONFIG_SYS_CS3_SIZE 0x00010000 -#define CONFIG_SYS_CS3_CFG 0x10109410 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/*----------------------------------------------------------------------- - * CPLD stuff - */ -#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ -#define CONFIG_SYS_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ - -/* CPLD program pin configuration */ -#define CONFIG_SYS_FPGA_PRG 0x20000000 /* JTAG TMS pin (ppc output) */ -#define CONFIG_SYS_FPGA_CLK 0x10000000 /* JTAG TCK pin (ppc output) */ -#define CONFIG_SYS_FPGA_DATA 0x20000000 /* JTAG TDO->TDI data pin (ppc output) */ -#define CONFIG_SYS_FPGA_DONE 0x10000000 /* JTAG TDI->TDO pin (ppc input) */ - -#define JTAG_GPIO_ADDR_TMS (CONFIG_SYS_MBAR + 0xB10) /* JTAG TMS pin (GPS data out value reg.) */ -#define JTAG_GPIO_ADDR_TCK (CONFIG_SYS_MBAR + 0xC0C) /* JTAG TCK pin (GPW data out value reg.) */ -#define JTAG_GPIO_ADDR_TDI (CONFIG_SYS_MBAR + 0xC0C) /* JTAG TDO->TDI pin (GPW data out value reg.) */ -#define JTAG_GPIO_ADDR_TDO (CONFIG_SYS_MBAR + 0xB14) /* JTAG TDI->TDO pin (GPS data in value reg.) */ - -#define JTAG_GPIO_ADDR_CFG (CONFIG_SYS_MBAR + 0xB00) -#define JTAG_GPIO_CFG_SET 0x00000000 -#define JTAG_GPIO_CFG_RESET 0x00F00000 - -#define JTAG_GPIO_ADDR_EN_TMS (CONFIG_SYS_MBAR + 0xB04) -#define JTAG_GPIO_TMS_EN_SET 0x20000000 /* Enable for GPIO */ -#define JTAG_GPIO_TMS_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TMS (CONFIG_SYS_MBAR + 0xB0C) -#define JTAG_GPIO_TMS_DDR_SET 0x20000000 /* Set as output */ -#define JTAG_GPIO_TMS_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TCK (CONFIG_SYS_MBAR + 0xC00) -#define JTAG_GPIO_TCK_EN_SET 0x20000000 /* Enable for GPIO */ -#define JTAG_GPIO_TCK_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TCK (CONFIG_SYS_MBAR + 0xC08) -#define JTAG_GPIO_TCK_DDR_SET 0x20000000 /* Set as output */ -#define JTAG_GPIO_TCK_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TDI (CONFIG_SYS_MBAR + 0xC00) -#define JTAG_GPIO_TDI_EN_SET 0x10000000 /* Enable as GPIO */ -#define JTAG_GPIO_TDI_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TDI (CONFIG_SYS_MBAR + 0xC08) -#define JTAG_GPIO_TDI_DDR_SET 0x10000000 /* Set as output */ -#define JTAG_GPIO_TDI_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TDO (CONFIG_SYS_MBAR + 0xB04) -#define JTAG_GPIO_TDO_EN_SET 0x10000000 /* Enable as GPIO */ -#define JTAG_GPIO_TDO_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TDO (CONFIG_SYS_MBAR + 0xB0C) -#define JTAG_GPIO_TDO_DDR_SET 0x00000000 -#define JTAG_GPIO_TDO_DDR_RESET 0x10000000 /* Set as input */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index cb03e33..1683a15 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -11,6 +11,8 @@ * High Level Configuration Options (easy to change) */ #define CONFIG_ARMADA_XP /* SOC Family Name */ +#define CONFIG_DB_784MP_GP /* Board target name for DDR training */ + #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -65,4 +67,51 @@ */ #include "mv-common.h" +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_SPD_EEPROM 0x4e + #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 46a42b3..ec7f721 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -12,6 +12,8 @@ #ifndef _CONFIG_DOCKSTAR_H #define _CONFIG_DOCKSTAR_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index ad63f3c..0ba39a2 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -126,12 +126,11 @@ #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) /* I2C */ -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C +#define CONFIG_DM_I2C +#define CONFIG_DM_I2C_COMPAT #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0 -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 #define CONFIG_I2C_EDID diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h index 6714313..ae0e5ff 100644 --- a/include/configs/exynos5250-common.h +++ b/include/configs/exynos5250-common.h @@ -28,9 +28,6 @@ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK -/* PMIC */ -#define CONFIG_POWER_MAX77686 - /* Sound */ #define CONFIG_CMD_SOUND #ifdef CONFIG_CMD_SOUND diff --git a/include/configs/galileo.h b/include/configs/galileo.h new file mode 100644 index 0000000..d745f4e --- /dev/null +++ b/include/configs/galileo.h @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_X86_SERIAL + +/* ns16550 UART is memory-mapped in Quark SoC */ +#undef CONFIG_SYS_NS16550_PORT_MAPPED + +#define CONFIG_PCI_MEM_BUS 0x90000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x20000000 + +#define CONFIG_PCI_PREF_BUS 0xb0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x20000000 + +#define CONFIG_PCI_IO_BUS 0x2000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xe000 + +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP + +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +/* SATA is not supported in Quark SoC */ +#undef CONFIG_SCSI_AHCI +#undef CONFIG_CMD_SCSI + +/* Video is not supported in Quark SoC */ +#undef CONFIG_VIDEO +#undef CONFIG_CFB_CONSOLE + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_CMD_MMC + +#endif /* __CONFIG_H */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 5ed9497..836515d 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -15,6 +15,8 @@ #ifndef _CONFIG_GOFLEXHOME_H #define _CONFIG_GOFLEXHOME_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index a56a4cb..8e53af8 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -1,5 +1,6 @@ /* - * (C) Copyright 2009 + * (C) Copyright 2009-2014 + * Gerald Kerma <dreagle@doukki.net> * Marvell Semiconductor <www.marvell.com> * Written-by: Siddarth Gore <gores@marvell.com> * @@ -9,6 +10,8 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ @@ -23,17 +26,36 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* + * Compression configuration + */ +#define CONFIG_BZIP2 +#define CONFIG_LZMA +#define CONFIG_LZO + +/* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + +/* * Commands configuration */ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT +#define CONFIG_CMD_IDE +#define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB -#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT /* * mv-common.h should be defined after CMD configs since it used them @@ -55,24 +77,38 @@ * it has to be rounded to sector size */ #define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x60000 -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ +#define CONFIG_ENV_OFFSET 0xE0000 /* env starts here */ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ - "${x_bootcmd_ethernet}; setenv ethact egiga1; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "x_bootcmd_ethernet=ping 192.168.2.1\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \ - "x_bootargs=console=ttyS0,115200\0" \ - "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0" +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:rootfs; " \ + "ubifsload 0x800000 ${kernel}; " \ + "ubifsload 0x700000 ${fdt}; " \ + "ubifsumount; " \ + "fdt addr 0x700000; fdt resize; fdt chosen; " \ + "bootz 0x800000 - 0x700000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:" \ + "896K(uboot),128K(uboot_env)," \ + "-@1M(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/zImage\0" \ + "fdt=/boot/guruplug-server-plus.dtb\0" \ + "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" + +#define MTDIDS_DEFAULT "nand0=orion_nand" + +#define MTDPARTS_DEFAULT \ + "mtdparts="CONFIG_MTDPARTS /* * Ethernet Driver configuration @@ -89,6 +125,20 @@ #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #endif /*CONFIG_MVSATA_IDE*/ +/* + * File system + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS + #define CONFIG_SYS_ALT_MEMTEST #endif /* _CONFIG_GURUPLUG_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index f4c748a..f1ddf21 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -9,6 +9,8 @@ #ifndef _CONFIG_IB62x0_H #define _CONFIG_IB62x0_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index ac5ca9a..2a937c6 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -82,7 +82,7 @@ #define CONFIG_ENV_OFFSET 0x4000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE 0x12000 /* Total Size of Environment Sector */ #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) #define ENV_IS_EMBEDDED #else diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 9f4a4b8..2baf50c 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -9,6 +9,8 @@ #ifndef _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index f084834..2384864 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -575,12 +575,9 @@ #define CONFIG_VERSION_VARIABLE -#define CONFIG_FIT -#define CONFIG_FIT_SIGNATURE #define CONFIG_IMAGE_FORMAT_LEGACY #define CONFIG_CMD_FDT #define CONFIG_CMD_HASH -#define CONFIG_RSA #define CONFIG_SHA1 #define CONFIG_SHA256 diff --git a/include/configs/ip04.h b/include/configs/ip04.h index ec510bd..2ee215f 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -61,7 +61,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 #define CONFIG_EBIU_AMBCTL1_VAL 0xffc2ffc2 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) #define CONFIG_SYS_MALLOC_LEN (128 * 1024) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 8dc04f2..2874ccc 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -19,6 +19,11 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DEEP_SLEEP +#if defined(CONFIG_DEEP_SLEEP) +#define CONFIG_SILENT_CONSOLE +#endif + /* * Size of malloc() pool */ @@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_PAD_TO 0x1c000 #define CONFIG_SYS_TEXT_BASE 0x82000000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ + CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 @@ -365,11 +371,16 @@ unsigned long get_board_ddr_clk(void); /* * Serial Port */ +#ifdef CONFIG_LPUART +#define CONFIG_FSL_LPUART +#define CONFIG_LPUART_32B_REG +#else #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() +#endif #define CONFIG_BAUDRATE 115200 @@ -385,6 +396,7 @@ unsigned long get_board_ddr_clk(void); */ #define I2C_MUX_PCA_ADDR_PRI 0x77 #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_CH7301 0xC /* * MMC @@ -427,6 +439,25 @@ unsigned long get_board_ddr_clk(void); #endif /* + * Video + */ +#define CONFIG_FSL_DCU_FB + +#ifdef CONFIG_FSL_DCU_FB +#define CONFIG_VIDEO +#define CONFIG_CMD_BMP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO + +#define CONFIG_FSL_DIU_CH7301 +#define CONFIG_SYS_I2C_DVI_BUS_NUM 0 +#define CONFIG_SYS_I2C_QIXIS_ADDR 0x66 +#define CONFIG_SYS_I2C_DVI_ADDR 0x75 +#endif + +/* * eTSEC */ #define CONFIG_TSEC_ENET @@ -508,11 +539,19 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_QE_FW_ADDR 0x67f40000 +#ifdef CONFIG_LPUART +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ + "fdt_high=0xcfffffff\0" \ + "initrd_high=0xcfffffff\0" \ + "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "fdt_high=0xcfffffff\0" \ "initrd_high=0xcfffffff\0" \ "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0" +#endif /* * Miscellaneous configurable options diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 66954d0..0a0bb5f 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -186,11 +186,16 @@ /* * Serial Port */ +#ifdef CONFIG_LPUART +#define CONFIG_FSL_LPUART +#define CONFIG_LPUART_32B_REG +#else #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_serial_clock() +#endif #define CONFIG_BAUDRATE 115200 @@ -325,10 +330,17 @@ #define CONFIG_BOOTDELAY 3 +#ifdef CONFIG_LPUART +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \ + "initrd_high=0xcfffffff\0" \ + "fdt_high=0xcfffffff\0" +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "initrd_high=0xcfffffff\0" \ "fdt_high=0xcfffffff\0" +#endif /* * Miscellaneous configurable options diff --git a/include/configs/malta.h b/include/configs/malta.h index a29b86b..354672e 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -38,8 +38,6 @@ #define CONFIG_SYS_MHZ 250 /* arbitrary value */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SWAP_IO_SPACE - /* * Memory map */ @@ -73,6 +71,7 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING @@ -109,6 +108,16 @@ (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE) /* + * IDE/ATA + */ +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 2 +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 + +/* * Commands */ #include <config_cmd_default.h> @@ -120,6 +129,8 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IDE #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 72217bd..5999d60 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -43,6 +43,8 @@ #define CONFIG_SF_DEFAULT_SPEED 1000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_BAR /* Environment in SPI NOR flash */ #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -65,4 +67,51 @@ */ #include "mv-common.h" +/* + * Memory layout while starting into the bin_hdr via the + * BootROM: + * + * 0x4000.4000 - 0x4003.4000 headers space (192KiB) + * 0x4000.4030 bin_hdr start address + * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) + * 0x4007.fffc BootROM stack top + * + * The address space between 0x4007.fffc and 0x400f.fff is not locked in + * L2 cache thus cannot be used. + */ + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40004030 +#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) + +#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) +#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10) + +#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) +#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/mvebu-common/u-boot-spl.lds" + +/* SPL related SPI defines */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ +#define CONFIG_SYS_MVEBU_DDR +#define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ + #endif /* _CONFIG_DB_MV7846MP_GP_H */ diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h deleted file mode 100644 index b270429..0000000 --- a/include/configs/mecp5200.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -/************************************************************************* - * (c) 2005 esd gmbh Hannover - * - * - * from IceCube.h file - * by Reinhard Arlt reinhard.arlt@esd-electronics.com - * - *************************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_ICECUBE 1 /* ... on IceCube board */ -#define CONFIG_MECP5200 1 /* ... on MECP5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#if 0 /* test-only */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#else -#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ -#endif -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_MII -#if 0 /* test-only !!! */ -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* USB */ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_BSP -#define CONFIG_CMD_ELF - - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#endif -#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT08 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Welcome to CBX-CPU5200 (mecp5200);" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=mecp5200.esd\0" \ - "script=mecp5200.bat\0" \ - "image=/tftpboot/vxWorks_mecp5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_vxworks0" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 86000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_FLASH_SIZE 0x00400000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x003E0000) -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/* - * Environment settings - */ -#if 1 /* test-only */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 -#else -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars*/ - /* total size of a CAT24WC32 is 8192 bytes */ -#define CONFIG_ENV_OVERWRITE 1 -#endif - -#define CONFIG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ -#if 0 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#endif -#define CONFIG_SYS_FLASH_INCREMENT 0x00400000 /* size of flash bank */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */ - - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_UDP_CHECKSUM 1 - - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x01052444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00085d00 - -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS1_START 0xfd000000 -#define CONFIG_SYS_CS1_SIZE 0x00010000 -#define CONFIG_SYS_CS1_CFG 0x10101410 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index bb07060..166ab4f 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -106,62 +106,22 @@ # define CONFIG_XILINX_TB_WATCHDOG #endif -/* - * memory layout - Example - * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk - * CONFIG_SYS_SRAM_BASE = 0x1000_0000; - * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB - * - * CONFIG_SYS_MONITOR_LEN = 0x40000 - * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000 - * - * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 - * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000 - * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000 - * - * 0x1000_0000 CONFIG_SYS_SDRAM_BASE - * MEMTEST_AREA 64kB - * FREE - * 0x1200_0000 CONFIG_SYS_TEXT_BASE - * U-BOOT code - * 0x1202_0000 - * FREE - * - * STACK - * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE - * MALLOC_AREA 768kB Alloc - * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE - * MONITOR_CODE 256kB Env - * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd - * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - */ - +#ifndef CONFIG_OF_CONTROL /* ddr sdram - main memory */ -#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -/* global pointer */ -/* start of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* monitor code */ -#define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE -#define CONFIG_SYS_MONITOR_BASE \ - (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ - - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) -#define CONFIG_SYS_MONITOR_END \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN (SIZE * 3) -#define CONFIG_SYS_MALLOC_BASE \ - (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) - -/* stack */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE +# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START +# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE +#endif + +#define CONFIG_SYS_MALLOC_LEN 0xC0000 +#ifndef CONFIG_SPL_BUILD +# define CONFIG_SYS_MALLOC_F_LEN 1024 +#else +# define CONFIG_SYS_MALLOC_SIMPLE +# define CONFIG_SYS_MALLOC_F_LEN 0x150 +#endif + +/* Stack location before relocation */ +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_TEXT_BASE /* * CFI flash memory layout - Example @@ -452,7 +412,10 @@ #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" #define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_NOR_SUPPORT +#ifdef CONFIG_SYS_FLASH_BASE +# define CONFIG_SPL_NOR_SUPPORT +# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE +#endif /* for booting directly linux */ #define CONFIG_SPL_OS_BOOT @@ -468,36 +431,20 @@ /* BRAM start */ #define CONFIG_SYS_INIT_RAM_ADDR 0x0 /* BRAM size - will be generated */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -/* Stack pointer prior relocation, must situated at on-chip RAM */ -#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -/* - * The main reason to do it in this way is that MALLOC_START - * can't be defined - common/spl/spl.c - */ -#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0) -# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \ - CONFIG_SYS_SPL_MALLOC_SIZE) -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START -#else -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END -#endif +# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_MALLOC_F_LEN) /* Just for sure that there is a space for stack */ #define CONFIG_SPL_STACK_SIZE 0x100 -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ CONFIG_SYS_INIT_RAM_ADDR - \ - GENERATED_GBL_DATA_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE - \ + CONFIG_SYS_MALLOC_F_LEN - \ CONFIG_SPL_STACK_SIZE) #endif /* __CONFIG_H */ diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h new file mode 100644 index 0000000..823e051 --- /dev/null +++ b/include/configs/minnowmax.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2015 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/x86-common.h> + +#define CONFIG_SYS_MONITOR_LEN (1 << 20) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_X86_SERIAL +#define CONFIG_SMSC_LPC47M + +#define CONFIG_PCI_MEM_BUS 0xd0000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_PREF_BUS 0xc0000000 +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS +#define CONFIG_PCI_PREF_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x2000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0xe000 + +#define CONFIG_SYS_EARLY_PCI_INIT +#define CONFIG_PCI_PNP +#define CONFIG_RTL8169 +#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \ + "stdout=vga,serial\0" \ + "stderr=vga,serial\0" + +#define CONFIG_SCSI_DEV_LIST \ + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA} +#define CONFIG_SPI_FLASH_SST + +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_SDMA +#define CONFIG_CMD_MMC + +#undef CONFIG_USB_MAX_CONTROLLER_COUNT +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_X86_OPTION_ROM_FILE vga.bin +#define CONFIG_X86_OPTION_ROM_ADDR 0xfff90000 + +#ifndef CONFIG_SYS_COREBOOT +#define CONFIG_VIDEO_VESA +#endif +#define VIDEO_IO_OFFSET 0 +#define CONFIG_X86EMU_RAW_IO +#define CONFIG_VGA_AS_SINGLE_DEVICE + +#define CONFIG_FIT_SIGNATURE +#define CONFIG_RSA + +/* Avoid a warning in the Realtek Ethernet driver */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#endif /* __CONFIG_H */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 982b689..46fc91e 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -28,6 +28,7 @@ #define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 807e96b..9d5dbdc 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -177,12 +177,11 @@ /* I2C */ #define CONFIG_CMD_I2C -#define CONFIG_SYS_I2C +#define CONFIG_DM_I2C +#define CONFIG_DM_I2C_COMPAT #define CONFIG_SYS_I2C_S3C24X0 #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0 -#define CONFIG_MAX_I2C_NUM 8 -#define CONFIG_SYS_I2C_INIT_BOARD /* POWER */ #define CONFIG_POWER diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index b2b3750..6295ec5 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,11 +29,21 @@ #define CONFIG_REVISION_TAG 1 -/* define to enable boot progress via leds */ -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ - (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define CONFIG_SHOW_BOOT_PROGRESS +/* Status LED */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define RED_LED_GPIO 27 +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define RED_LED_GPIO 16 #endif +#define RED_LED_DEV 0 +#define STATUS_LED_BIT RED_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT RED_LED_DEV /* GPIO banks */ #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h deleted file mode 100644 index be76478..0000000 --- a/include/configs/pf5200.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * (c) 2005 esd gmbh Hannover - * - * - * from IceCube.h file - * by Reinhard Arlt reinhard.arlt@esd-electronics.com - * - *************************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_ICECUBE 1 /* ... on IceCube board */ -#define CONFIG_PF5200 1 /* ... on PF5200 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#if 0 /* test-only */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#else -#define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ -#endif -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_MII 1 -#if 0 /* test-only !!! */ -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* USB */ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BSP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE - -#define CONFIG_CMD_PCI - - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#endif -#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT08 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Welcome to ParaFinder pf5200;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=phypower 1;sleep 2;tftp ${loadaddr} ${image};run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)${host}:${image} h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script}\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script} o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=pf5200.esd\0" \ - "script=pf5200.bat\0" \ - "image=/tftpboot/vxWorks_pf5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_vxworks0" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 86000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00000000) -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -/* - * Environment settings - */ -#if 1 /* test-only */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 -#else -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars */ - /* total size of a CAT24WC32 is 8192 bytes */ -#define CONFIG_ENV_OVERWRITE 1 -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_UDP_CHECKSUM 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x01052444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0004DD00 - -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS1_START 0xfd000000 -#define CONFIG_SYS_CS1_SIZE 0x00010000 -#define CONFIG_SYS_CS1_CFG 0x10101410 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/*----------------------------------------------------------------------- - * CPLD stuff - */ -#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ -#define CONFIG_SYS_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ - -/* CPLD program pin configuration */ -#define CONFIG_SYS_FPGA_PRG 0x20000000 /* JTAG TMS pin (ppc output) */ -#define CONFIG_SYS_FPGA_CLK 0x10000000 /* JTAG TCK pin (ppc output) */ -#define CONFIG_SYS_FPGA_DATA 0x20000000 /* JTAG TDO->TDI data pin (ppc output) */ -#define CONFIG_SYS_FPGA_DONE 0x10000000 /* JTAG TDI->TDO pin (ppc input) */ - -#define JTAG_GPIO_ADDR_TMS (CONFIG_SYS_MBAR + 0xB10) /* JTAG TMS pin (GPS data out value reg.) */ -#define JTAG_GPIO_ADDR_TCK (CONFIG_SYS_MBAR + 0xC0C) /* JTAG TCK pin (GPW data out value reg.) */ -#define JTAG_GPIO_ADDR_TDI (CONFIG_SYS_MBAR + 0xC0C) /* JTAG TDO->TDI pin (GPW data out value reg.) */ -#define JTAG_GPIO_ADDR_TDO (CONFIG_SYS_MBAR + 0xB14) /* JTAG TDI->TDO pin (GPS data in value reg.) */ - -#define JTAG_GPIO_ADDR_CFG (CONFIG_SYS_MBAR + 0xB00) -#define JTAG_GPIO_CFG_SET 0x00000000 -#define JTAG_GPIO_CFG_RESET 0x00F00000 - -#define JTAG_GPIO_ADDR_EN_TMS (CONFIG_SYS_MBAR + 0xB04) -#define JTAG_GPIO_TMS_EN_SET 0x20000000 /* Enable for GPIO */ -#define JTAG_GPIO_TMS_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TMS (CONFIG_SYS_MBAR + 0xB0C) -#define JTAG_GPIO_TMS_DDR_SET 0x20000000 /* Set as output */ -#define JTAG_GPIO_TMS_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TCK (CONFIG_SYS_MBAR + 0xC00) -#define JTAG_GPIO_TCK_EN_SET 0x20000000 /* Enable for GPIO */ -#define JTAG_GPIO_TCK_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TCK (CONFIG_SYS_MBAR + 0xC08) -#define JTAG_GPIO_TCK_DDR_SET 0x20000000 /* Set as output */ -#define JTAG_GPIO_TCK_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TDI (CONFIG_SYS_MBAR + 0xC00) -#define JTAG_GPIO_TDI_EN_SET 0x10000000 /* Enable as GPIO */ -#define JTAG_GPIO_TDI_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TDI (CONFIG_SYS_MBAR + 0xC08) -#define JTAG_GPIO_TDI_DDR_SET 0x10000000 /* Set as output */ -#define JTAG_GPIO_TDI_DDR_RESET 0x00000000 - -#define JTAG_GPIO_ADDR_EN_TDO (CONFIG_SYS_MBAR + 0xB04) -#define JTAG_GPIO_TDO_EN_SET 0x10000000 /* Enable as GPIO */ -#define JTAG_GPIO_TDO_EN_RESET 0x00000000 -#define JTAG_GPIO_ADDR_DDR_TDO (CONFIG_SYS_MBAR + 0xB0C) -#define JTAG_GPIO_TDO_DDR_SET 0x00000000 -#define JTAG_GPIO_TDO_DDR_RESET 0x10000000 /* Set as input */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 7594bdb..89560ad 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -13,6 +13,8 @@ #ifndef _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Machine type definition and ID */ diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index d5588b1..5a0ab28 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -169,13 +169,14 @@ "bootz 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000" -#define CONFIG_SYS_MMC_ENV_DEV 0 #else #define CONFIG_ENV_IS_NOWHERE #endif @@ -246,6 +247,7 @@ #define CONFIG_SYS_NAND_OOBSIZE 64 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index f2849d7..cccc1ed 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -191,6 +191,7 @@ #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE #endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -215,13 +216,14 @@ "bootm 0x22000000 - 0x21000000" #elif CONFIG_SYS_USE_MMC /* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ "fatload mmc 0:1 0x22000000 uImage; " \ "bootm 0x22000000 - 0x21000000" -#define CONFIG_SYS_MMC_ENV_DEV 0 #else #define CONFIG_ENV_IS_NOWHERE #endif diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 104edef..6493d56 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -20,7 +20,9 @@ #define CONFIG_ARCH_CPU_INIT +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO @@ -66,8 +68,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -121,6 +127,14 @@ #define CONFIG_USB_STORAGE #endif +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" + #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -213,4 +227,54 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#endif #endif diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index cbdb3a2..9e1b86a 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -20,7 +20,9 @@ #define CONFIG_ARCH_CPU_INIT +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT +#endif #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO @@ -66,8 +68,12 @@ #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS #define CONFIG_SYS_SDRAM_SIZE 0x20000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -121,6 +127,14 @@ #define CONFIG_USB_STORAGE #endif +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK" + #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION @@ -211,4 +225,54 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_PMECC_CAP 8 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 224 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SERIALFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#endif #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 657f751..e9d3f32 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -23,7 +23,6 @@ #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT -#define CONFIG_DM #define CONFIG_CMD_DEMO #define CONFIG_CMD_DM #define CONFIG_DM_DEMO @@ -41,9 +40,6 @@ #define CONFIG_OF_LIBFDT #define CONFIG_LMB -#define CONFIG_FIT -#define CONFIG_FIT_SIGNATURE -#define CONFIG_RSA #define CONFIG_CMD_FDT #define CONFIG_ANDROID_BOOT_IMAGE diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 71be823..84029cb 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -10,6 +10,8 @@ #ifndef _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H +#define CONFIG_SYS_GENERIC_BOARD + /* * Version number information */ @@ -31,6 +33,11 @@ #define CONFIG_LZO /* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* * Miscellaneous configurable options */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -49,6 +56,7 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -139,6 +147,5 @@ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 8395372..3b06d30 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -18,6 +18,8 @@ #include <configs/exynos5250-common.h> +/* PMIC */ +#define CONFIG_POWER_MAX77686 #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 942af2e..9fa644f 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -34,7 +34,6 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SKIP_RELOCATE_UBOOT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_FIT diff --git a/include/configs/snow.h b/include/configs/snow.h index 7eaa586..ce6676e 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -22,6 +22,7 @@ #define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ #define CONFIG_POWER_TPS65090_I2C +#define CONFIG_DM_CROS_EC #define CONFIG_BOARD_COMMON #define CONFIG_ARCH_EARLY_INIT_R diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 7b85740..87d269b 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -13,7 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_SYS_PROMPT "sun4i# " #define CONFIG_MACH_TYPE 4104 #ifdef CONFIG_USB_EHCI diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 09f7533..52e3a6f 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -13,7 +13,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_SYS_PROMPT "sun5i# " #define CONFIG_MACH_TYPE 4138 #ifdef CONFIG_USB_EHCI diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 1b73852..f5e11dd 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -16,8 +16,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_SYS_PROMPT "sun6i# " - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index ccec50c..7cd7890 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -14,7 +14,6 @@ */ #define CONFIG_CLK_FULL_SPEED 912000000 -#define CONFIG_SYS_PROMPT "sun7i# " #define CONFIG_MACH_TYPE 4283 #ifdef CONFIG_USB_EHCI diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index f16e60b..3bdedb3 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -14,8 +14,6 @@ */ #define CONFIG_CLK_FULL_SPEED 1008000000 -#define CONFIG_SYS_PROMPT "sun8i# " - #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index e839053..cea52db 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -40,6 +40,8 @@ */ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_PROMPT "sunxi# " + /* Serial & console */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL @@ -83,6 +85,9 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_SETEXPR +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART + #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG @@ -179,7 +184,10 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 /* 512 KiB */ /* I2C */ +#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER #define CONFIG_SPL_I2C_SUPPORT +#endif + #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI #define CONFIG_SYS_I2C_SPEED 400000 @@ -247,8 +255,16 @@ #endif #ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 +#endif + +#ifdef CONFIG_USB_MUSB_SUNXI +#define CONFIG_MUSB_HOST +#define CONFIG_MUSB_PIO_ONLY +#endif + +#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI +#define CONFIG_CMD_USB #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 20194ae..2cf4558 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -21,11 +21,13 @@ */ #include <asm/hardware.h> -#define MACH_TYPE_TAURUS 2067 -#define MACH_TYPE_AXM 2068 - #define CONFIG_SYS_GENERIC_BOARD +#if defined(CONFIG_SPL_BUILD) +#define CONFIG_SYS_THUMB_BUILD +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#endif /* * Warning: changing CONFIG_SYS_TEXT_BASE requires * adapting the initial boot program. @@ -116,6 +118,12 @@ #define CONFIG_RMII #define CONFIG_AT91_WANTS_COMMON_PHY +#define CONFIG_AT91SAM9_WATCHDOG +#if !defined(CONFIG_SPL_BUILD) +/* Enable the watchdog */ +#define CONFIG_HW_WATCHDOG +#endif + /* USB */ #if defined(CONFIG_BOARD_TAURUS) #define CONFIG_USB_ATMEL @@ -137,6 +145,19 @@ #define TAURUS_SPI_MASK (1 << 4) #define TAURUS_SPI_CS_PIN AT91_PIN_PA3 +#if defined(CONFIG_SPL_BUILD) +/* SPL related */ +#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#endif + /* load address */ #define CONFIG_SYS_LOAD_ADDR 0x22000000 @@ -171,8 +192,11 @@ /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x0 -#define CONFIG_SPL_MAX_SIZE (11 * 1024) +#define CONFIG_SPL_MAX_SIZE (14 * 1024) #define CONFIG_SPL_STACK (16 * 1024) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE #define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) diff --git a/include/configs/tb100.h b/include/configs/tb100.h index e9218f7..46df406 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -12,21 +12,11 @@ /* * CPU configuration */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ /* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_ARCH_EARLY_INIT_R - -/* * Memory configuration */ -#define CONFIG_SYS_TEXT_BASE 0x84000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 5ed86d9..598526b 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -20,7 +20,9 @@ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_DM # define CONFIG_DM +#endif # define CONFIG_CMD_DM # define CONFIG_DM_GPIO # define CONFIG_DM_SERIAL diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 5a53c50..9420e6b 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation + * Copyright (C) 2012-2015 Panasonic Corporation * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -43,6 +43,9 @@ #define CONFIG_SDRAM1_SIZE 0x10000000 #endif +#define CONFIG_I2C_EEPROM +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + /* * Support card address map */ @@ -92,6 +95,8 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_MISC_INIT_F +#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -232,11 +237,16 @@ "image_offset=0x00080000\0" \ "image_size=0x00f00000\0" \ "verify=n\0" \ - "norboot=run add_default_bootargs;" \ + "nandupdate=nand erase 0 0x100000 &&" \ + "tftpboot u-boot-spl.bin &&" \ + "nand write $loadaddr 0 0x10000 &&" \ + "tftpboot u-boot-dtb.img &&" \ + "nand write $loadaddr 0x10000 0xf0000\0" \ + "norboot=run add_default_bootargs &&" \ "bootm $image_offset\0" \ - "nandboot=run add_default_bootargs;" \ - "nand read $loadaddr $image_offset $image_size;" \ - "bootm\0" \ + "nandboot=run add_default_bootargs &&" \ + "nand read $loadaddr $image_offset $image_size &&" \ + "bootm\0" \ "add_default_bootargs=setenv bootargs $bootargs" \ " console=ttyS0,$baudrate\0" \ @@ -266,8 +276,6 @@ #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif -#define CONFIG_BOARD_POSTCLK_INIT - #ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 027d78b..7fb28a5 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -11,9 +11,9 @@ /* We use generic board for v8 Versatile Express */ #define CONFIG_SYS_GENERIC_BOARD -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #ifndef CONFIG_SEMIHOSTING -#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING #endif #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARMV8_SWITCH_TO_EL1 @@ -21,8 +21,9 @@ #define CONFIG_REMAKE_ELF -#ifndef CONFIG_BASE_FVP -/* Base FVP not using GICv3 yet */ +#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \ + !defined(CONFIG_TARGET_VEXPRESS64_JUNO) +/* Base FVP and Juno not using GICv3 yet */ #define CONFIG_GICV3 #endif @@ -40,10 +41,13 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_TEXT_BASE 0x88000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_TEXT_BASE 0xe0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else #define CONFIG_SYS_TEXT_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -54,7 +58,7 @@ /* SMP Spin Table Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) #else #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -88,10 +92,15 @@ #define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) #define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define V2M_UART0 0x7ff80000 +#define V2M_UART1 0x7ff70000 +#else /* Not Juno */ #define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) #define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) #define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) #define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) +#endif #define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) @@ -119,9 +128,12 @@ #define GICR_BASE (0x2f100000) #else -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define GICD_BASE (0x2f000000) #define GICC_BASE (0x2c000000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define GICD_BASE (0x2C010000) +#define GICC_BASE (0x2C02f000) #else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) @@ -140,7 +152,11 @@ /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_PL011_CLOCK 7273800 +#else #define CONFIG_PL011_CLOCK 24000000 +#endif #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1} #define CONFIG_CONS_INDEX 0 @@ -161,6 +177,7 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI +#define CONFIG_CMD_LOADB #define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -191,7 +208,7 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Initial environment variables */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=uImage\0" \ "kernel_addr_r=0x80000000\0" \ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 7e78f8a..2dea921 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -122,7 +122,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_SYS_L2CACHE_OFF 1 #define CONFIG_INITRD_TAG 1 - +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT 1 /* Size of malloc() pool */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index f16ae32..062e6c2 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -39,7 +39,6 @@ /* SATA AHCI storage */ #define CONFIG_SCSI_AHCI -#define CONFIG_SATA_INTEL #ifdef CONFIG_SCSI_AHCI #define CONFIG_LIBATA #define CONFIG_SYS_64BIT_LBA @@ -179,6 +178,7 @@ #define VIDEO_FB_16BPP_WORD_SWAP #define CONFIG_I8042_KBD #define CONFIG_CFB_CONSOLE +#define CONFIG_CONSOLE_SCROLL_LINES 5 /*----------------------------------------------------------------------- * CPU Features @@ -210,6 +210,7 @@ #define CONFIG_CMD_SF_TEST #define CONFIG_CMD_SPI #define CONFIG_SPI +#define CONFIG_OF_SPI_FLASH /*----------------------------------------------------------------------- * Environment configuration @@ -243,6 +244,9 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTSTAGE +#define CONFIG_CMD_BOOTSTAGE + #define CONFIG_CMD_USB #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 87b4fff..864528a 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -47,6 +47,17 @@ # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN # define CONFIG_PHYLIB # define CONFIG_PHY_MARVELL +# define CONFIG_BOOTP_SERVERIP +# define CONFIG_BOOTP_BOOTPATH +# define CONFIG_BOOTP_GATEWAY +# define CONFIG_BOOTP_HOSTNAME +# define CONFIG_BOOTP_MAY_FAIL +# if !defined(CONFIG_ZYNQ_GEM_EMIO0) +# define CONFIG_ZYNQ_GEM_EMIO0 0 +# endif +# if !defined(CONFIG_ZYNQ_GEM_EMIO1) +# define CONFIG_ZYNQ_GEM_EMIO1 0 +# endif #endif /* SPI */ @@ -90,6 +101,55 @@ # define CONFIG_USB_ULPI # define CONFIG_EHCI_IS_TDI # define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +# define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ +# define CONFIG_USB_GADGET +# define CONFIG_USB_GADGET_DUALSPEED +# define CONFIG_USBDOWNLOAD_GADGET +# define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 +# define DFU_DEFAULT_POLL_TIMEOUT 300 +# define CONFIG_DFU_FUNCTION +# define CONFIG_DFU_RAM +# define CONFIG_USB_GADGET_VBUS_DRAW 2 +# define CONFIG_G_DNL_VENDOR_NUM 0x03FD +# define CONFIG_G_DNL_PRODUCT_NUM 0x0300 +# define CONFIG_G_DNL_MANUFACTURER "Xilinx" +# define CONFIG_USB_GADGET +# define CONFIG_USB_CABLE_CHECK +# define CONFIG_CMD_DFU +# define CONFIG_CMD_THOR_DOWNLOAD +# define CONFIG_THOR_FUNCTION +# define DFU_ALT_INFO_RAM \ + "dfu_ram_info=" \ + "set dfu_alt_info " \ + "${kernel_image} ram 0x3000000 0x500000\\\\;" \ + "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \ + "${ramdisk_image} ram 0x2000000 0x600000\0" \ + "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ + "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" + +# if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +# define CONFIG_DFU_MMC +# define DFU_ALT_INFO_MMC \ + "dfu_mmc_info=" \ + "set dfu_alt_info " \ + "${kernel_image} fat 0 1\\\\;" \ + "${devicetree_image} fat 0 1\\\\;" \ + "${ramdisk_image} fat 0 1\0" \ + "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \ + "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0" + +# define DFU_ALT_INFO \ + DFU_ALT_INFO_RAM \ + DFU_ALT_INFO_MMC +# else +# define DFU_ALT_INFO \ + DFU_ALT_INFO_RAM +# endif +#endif + +#if !defined(DFU_ALT_INFO) +# define DFU_ALT_INFO #endif #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB) @@ -100,6 +160,7 @@ # define CONFIG_DOS_PARTITION # define CONFIG_CMD_EXT4 # define CONFIG_CMD_EXT4_WRITE +# define CONFIG_CMD_FS_GENERIC #endif #define CONFIG_SYS_I2C_ZYNQ @@ -121,12 +182,6 @@ # define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ #endif -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_MAY_FAIL - /* Total Size of Environment Sector */ #define CONFIG_ENV_SIZE (128 << 10) @@ -159,16 +214,17 @@ "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ "bootm ${load_addr}\0" \ "sdboot=echo Copying FIT from SD to RAM... && " \ - "fatload mmc 0 ${load_addr} ${fit_image} && " \ + "load mmc 0 ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "jtagboot=echo TFTPing FIT to RAM... && " \ "tftpboot ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ "usbboot=if usb start; then " \ "echo Copying FIT from USB to RAM... && " \ - "fatload usb 0 ${load_addr} ${fit_image} && " \ + "load usb 0 ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ - "fi\0" + "fi\0" \ + DFU_ALT_INFO #define CONFIG_BOOTCOMMAND "run $modeboot" #define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ @@ -181,6 +237,7 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_AUTO_COMPLETE #define CONFIG_BOARD_LATE_INIT +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_LONGHELP #define CONFIG_CLOCKS #define CONFIG_CMD_CLK @@ -198,7 +255,7 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) -#define CONFIG_SYS_MALLOC_LEN 0x400000 +#define CONFIG_SYS_MALLOC_LEN 0xC00000 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ @@ -219,17 +276,11 @@ #define CONFIG_OF_LIBFDT /* FIT support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ #define CONFIG_DISPLAY_BOARDINFO_LATE -/* RSA support */ -#define CONFIG_FIT_SIGNATURE -#define CONFIG_RSA - /* Extend size of kernel image for uncompression */ #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) diff --git a/include/cros_ec.h b/include/cros_ec.h index 9e13146..8457c80 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -13,6 +13,7 @@ #include <ec_commands.h> #include <fdtdec.h> #include <cros_ec_message.h> +#include <asm/gpio.h> #ifndef CONFIG_DM_CROS_EC /* Which interface is the device on? */ @@ -39,7 +40,7 @@ struct cros_ec_dev { unsigned int bus_num; /* Bus number (for I2C) */ unsigned int max_frequency; /* Maximum interface frequency */ #endif - struct fdt_gpio_state ec_int; /* GPIO used as EC interrupt line */ + struct gpio_desc ec_int; /* GPIO used as EC interrupt line */ int protocol_version; /* Protocol version to use */ int optimise_flash_write; /* Don't write erased flash blocks */ diff --git a/include/dm-demo.h b/include/dm-demo.h index a24fec6..03722d0 100644 --- a/include/dm-demo.h +++ b/include/dm-demo.h @@ -25,10 +25,14 @@ struct dm_demo_pdata { struct demo_ops { int (*hello)(struct udevice *dev, int ch); int (*status)(struct udevice *dev, int *status); + int (*set_light)(struct udevice *dev, int light); + int (*get_light)(struct udevice *dev); }; int demo_hello(struct udevice *dev, int ch); int demo_status(struct udevice *dev, int *status); +int demo_set_light(struct udevice *dev, int light); +int demo_get_light(struct udevice *dev); int demo_list(void); int demo_parse_dt(struct udevice *dev); diff --git a/include/dm/device.h b/include/dm/device.h index 13598a1..81afa8c 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -26,6 +26,9 @@ struct driver_info; /* DM should init this device prior to relocation */ #define DM_FLAG_PRE_RELOC (1 << 2) +/* DM is responsible for allocating and freeing parent_platdata */ +#define DM_FLAG_ALLOC_PARENT_PDATA (1 << 3) + /** * struct udevice - An instance of a driver * @@ -46,6 +49,7 @@ struct driver_info; * @driver: The driver used by this device * @name: Name of device, typically the FDT node name * @platdata: Configuration data for this device + * @parent_platdata: The parent bus's configuration data for this device * @of_offset: Device tree node offset for this device (- for none) * @of_id: Pointer to the udevice_id structure which created the device * @parent: Parent of this device, or NULL for the top level device @@ -65,6 +69,7 @@ struct udevice { struct driver *driver; const char *name; void *platdata; + void *parent_platdata; int of_offset; const struct udevice_id *of_id; struct udevice *parent; @@ -127,6 +132,7 @@ struct udevice_id { * @remove: Called to remove a device, i.e. de-activate it * @unbind: Called to unbind a device from its driver * @ofdata_to_platdata: Called before probe to decode device tree data + * @child_post_bind: Called after a new child has been bound * @child_pre_probe: Called before a child device is probed. The device has * memory allocated but it has not yet been probed. * @child_post_remove: Called after a child device is removed. The device @@ -146,6 +152,9 @@ struct udevice_id { * device_probe_child() pass it in. So far the use case for allocating it * is SPI, but I found that unsatisfactory. Since it is here I will leave it * until things are clearer. + * @per_child_platdata_auto_alloc_size: A bus likes to store information about + * its children. If non-zero this is the size of this data, to be allocated + * in the child's parent_platdata pointer. * @ops: Driver-specific operations. This is typically a list of function * pointers defined by the driver, to implement driver functions required by * the uclass. @@ -160,11 +169,13 @@ struct driver { int (*remove)(struct udevice *dev); int (*unbind)(struct udevice *dev); int (*ofdata_to_platdata)(struct udevice *dev); + int (*child_post_bind)(struct udevice *dev); int (*child_pre_probe)(struct udevice *dev); int (*child_post_remove)(struct udevice *dev); int priv_auto_alloc_size; int platdata_auto_alloc_size; int per_child_auto_alloc_size; + int per_child_platdata_auto_alloc_size; const void *ops; /* driver-specific operations */ uint32_t flags; }; @@ -184,6 +195,16 @@ struct driver { void *dev_get_platdata(struct udevice *dev); /** + * dev_get_parent_platdata() - Get the parent platform data for a device + * + * This checks that dev is not NULL, but no other checks for now + * + * @dev Device to check + * @return parent's platform data, or NULL if none + */ +void *dev_get_parent_platdata(struct udevice *dev); + +/** * dev_get_parentdata() - Get the parent data for a device * * The parent data is data stored in the device but owned by the parent. @@ -224,6 +245,14 @@ struct udevice *dev_get_parent(struct udevice *child); */ ulong dev_get_of_data(struct udevice *dev); +/* + * device_get_uclass_id() - return the uclass ID of a device + * + * @dev: Device to check + * @return uclass ID for the device + */ +enum uclass_id device_get_uclass_id(struct udevice *dev); + /** * device_get_child() - Get the child of a device by index * diff --git a/include/dm/test.h b/include/dm/test.h index f08c05d..707c69e 100644 --- a/include/dm/test.h +++ b/include/dm/test.h @@ -67,6 +67,8 @@ enum { struct dm_test_priv { int ping_total; int op_count[DM_TEST_OP_COUNT]; + int uclass_flag; + int uclass_total; }; /** @@ -88,6 +90,7 @@ struct dm_test_uclass_priv { * * @sum: Test value used to check parent data works correctly * @flag: Used to track calling of parent operations + * @uclass_flag: Used to track calling of parent operations by uclass */ struct dm_test_parent_data { int sum; diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index f17c3c2..91bb90d 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -33,6 +33,7 @@ enum uclass_id { UCLASS_I2C, /* I2C bus */ UCLASS_I2C_GENERIC, /* Generic I2C device */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ + UCLASS_MOD_EXP, /* RSA Mod Exp device */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index f718f37..f2f254a 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -44,6 +44,17 @@ int uclass_bind_device(struct udevice *dev); int uclass_unbind_device(struct udevice *dev); /** + * uclass_pre_probe_child() - Deal with a child that is about to be probed + * + * Perform any pre-processing that is needed by the uclass before it can be + * probed. + * + * @dev: Pointer to the device + * #return 0 on success, -ve on error + */ +int uclass_pre_probe_child(struct udevice *dev); + +/** * uclass_post_probe_device() - Deal with a device that has just been probed * * Perform any post-processing of a probed device that is needed by the diff --git a/include/dm/uclass.h b/include/dm/uclass.h index f6ec6d7..d6c40c6 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -40,6 +40,9 @@ struct uclass { struct udevice; +/* Members of this uclass sequence themselves with aliases */ +#define DM_UC_FLAG_SEQ_ALIAS (1 << 0) + /** * struct uclass_driver - Driver for the uclass * @@ -52,6 +55,7 @@ struct udevice; * @pre_unbind: Called before a device is unbound from this uclass * @post_probe: Called after a new device is probed * @pre_remove: Called before a device is removed + * @child_post_bind: Called after a child is bound to a device in this uclass * @init: Called to set up the uclass * @destroy: Called to destroy the uclass * @priv_auto_alloc_size: If non-zero this is the size of the private data @@ -60,8 +64,16 @@ struct udevice; * @per_device_auto_alloc_size: Each device can hold private data owned * by the uclass. If required this will be automatically allocated if this * value is non-zero. + * @per_child_auto_alloc_size: Each child device (of a parent in this + * uclass) can hold parent data for the device/uclass. This value is only + * used as a falback if this member is 0 in the driver. + * @per_child_platdata_auto_alloc_size: A bus likes to store information about + * its children. If non-zero this is the size of this data, to be allocated + * in the child device's parent_platdata pointer. This value is only used as + * a falback if this member is 0 in the driver. * @ops: Uclass operations, providing the consistent interface to devices * within the uclass. + * @flags: Flags for this uclass (DM_UC_...) */ struct uclass_driver { const char *name; @@ -70,11 +82,16 @@ struct uclass_driver { int (*pre_unbind)(struct udevice *dev); int (*post_probe)(struct udevice *dev); int (*pre_remove)(struct udevice *dev); + int (*child_post_bind)(struct udevice *dev); + int (*child_pre_probe)(struct udevice *dev); int (*init)(struct uclass *class); int (*destroy)(struct uclass *class); int priv_auto_alloc_size; int per_device_auto_alloc_size; + int per_child_auto_alloc_size; + int per_child_platdata_auto_alloc_size; const void *ops; + uint32_t flags; }; /* Declare a new uclass_driver */ @@ -141,6 +158,8 @@ int uclass_get_device_by_of_offset(enum uclass_id id, int node, /** * uclass_first_device() - Get the first device in a uclass * + * The device returned is probed if necessary, and ready for use + * * @id: Uclass ID to look up * @devp: Returns pointer to the first device in that uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error @@ -150,6 +169,8 @@ int uclass_first_device(enum uclass_id id, struct udevice **devp); /** * uclass_next_device() - Get the next device in a uclass * + * The device returned is probed if necessary, and ready for use + * * @devp: On entry, pointer to device to lookup. On exit, returns pointer * to the next device in the same uclass, or NULL if none * @return 0 if OK (found or not found), -1 on error diff --git a/include/dt-bindings/mrc/quark.h b/include/dt-bindings/mrc/quark.h new file mode 100644 index 0000000..e3ca8a2 --- /dev/null +++ b/include/dt-bindings/mrc/quark.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Intel Quark MRC bindings include several properties + * as part of an Intel Quark MRC node. In most cases, + * the value of these properties uses the standard values + * defined in this header. + */ + +#ifndef _DT_BINDINGS_QRK_MRC_H_ +#define _DT_BINDINGS_QRK_MRC_H_ + +/* MRC platform data flags */ +#define MRC_FLAG_ECC_EN 0x00000001 +#define MRC_FLAG_SCRAMBLE_EN 0x00000002 +#define MRC_FLAG_MEMTEST_EN 0x00000004 +/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */ +#define MRC_FLAG_TOP_TREE_EN 0x00000008 +/* If set ODR signal is asserted to DRAM devices on writes */ +#define MRC_FLAG_WR_ODT_EN 0x00000010 + +/* DRAM width */ +#define DRAM_WIDTH_X8 0 +#define DRAM_WIDTH_X16 1 +#define DRAM_WIDTH_X32 2 + +/* DRAM speed */ +#define DRAM_FREQ_800 0 +#define DRAM_FREQ_1066 1 + +/* DRAM type */ +#define DRAM_TYPE_DDR3 0 +#define DRAM_TYPE_DDR3L 1 + +/* DRAM rank mask */ +#define DRAM_RANK(n) (1 << (n)) + +/* DRAM channel mask */ +#define DRAM_CHANNEL(n) (1 << (n)) + +/* DRAM channel width */ +#define DRAM_CHANNEL_WIDTH_X8 0 +#define DRAM_CHANNEL_WIDTH_X16 1 +#define DRAM_CHANNEL_WIDTH_X32 2 + +/* DRAM address mode */ +#define DRAM_ADDR_MODE0 0 +#define DRAM_ADDR_MODE1 1 +#define DRAM_ADDR_MODE2 2 + +/* DRAM refresh rate */ +#define DRAM_REFRESH_RATE_195US 1 +#define DRAM_REFRESH_RATE_39US 2 +#define DRAM_REFRESH_RATE_785US 3 + +/* DRAM SR temprature range */ +#define DRAM_SRT_RANGE_NORMAL 0 +#define DRAM_SRT_RANGE_EXTENDED 1 + +/* DRAM ron value */ +#define DRAM_RON_34OHM 0 +#define DRAM_RON_40OHM 1 + +/* DRAM rtt nom value */ +#define DRAM_RTT_NOM_40OHM 0 +#define DRAM_RTT_NOM_60OHM 1 +#define DRAM_RTT_NOM_120OHM 2 + +/* DRAM rd odt value */ +#define DRAM_RD_ODT_OFF 0 +#define DRAM_RD_ODT_60OHM 1 +#define DRAM_RD_ODT_120OHM 2 +#define DRAM_RD_ODT_180OHM 3 + +/* DRAM density */ +#define DRAM_DENSITY_512M 0 +#define DRAM_DENSITY_1G 1 +#define DRAM_DENSITY_2G 2 +#define DRAM_DENSITY_4G 3 + +#endif /* _DT_BINDINGS_QRK_MRC_H_ */ diff --git a/include/exports.h b/include/exports.h index 41d5085..205affe 100644 --- a/include/exports.h +++ b/include/exports.h @@ -3,6 +3,8 @@ #ifndef __ASSEMBLY__ +struct spi_slave; + /* These are declarations of exported functions available in C code */ unsigned long get_version(void); int getc(void); @@ -10,22 +12,23 @@ int tstc(void); void putc(const char); void puts(const char*); int printf(const char* fmt, ...); -void install_hdlr(int, void (*interrupt_handler_t)(void *), void*); +void install_hdlr(int, interrupt_handler_t, void*); void free_hdlr(int); void *malloc(size_t); void free(void*); void __udelay(unsigned long); unsigned long get_timer(unsigned long); int vprintf(const char *, va_list); -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base); +unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base); int strict_strtoul(const char *cp, unsigned int base, unsigned long *res); char *getenv (const char *name); int setenv (const char *varname, const char *varvalue); -long simple_strtol(const char *cp,char **endp,unsigned int base); -int strcmp(const char * cs,const char * ct); +long simple_strtol(const char *cp, char **endp, unsigned int base); +int strcmp(const char *cs, const char *ct); unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base); -#if defined(CONFIG_CMD_I2C) +#if defined(CONFIG_CMD_I2C) && \ + (!defined(CONFIG_DM_I2C) || defined(CONFIG_DM_I2C_COMPAT)) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); #endif @@ -34,15 +37,14 @@ void app_startup(char * const *); #endif /* ifndef __ASSEMBLY__ */ -enum { -#define EXPORT_FUNC(x) XF_ ## x , +struct jt_funcs { +#define EXPORT_FUNC(impl, res, func, ...) res(*func)(__VA_ARGS__); #include <_exports.h> #undef EXPORT_FUNC - - XF_MAX }; -#define XF_VERSION 6 + +#define XF_VERSION 7 #if defined(CONFIG_X86) extern gd_t *global_data; diff --git a/include/exynos_lcd.h b/include/exynos_lcd.h new file mode 100644 index 0000000..cf389da --- /dev/null +++ b/include/exynos_lcd.h @@ -0,0 +1,81 @@ +/* + * exynos_lcd.h - Exynos LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EXYNOS_LCD_H_ +#define _EXYNOS_LCD_H_ + +enum { + FIMD_RGB_INTERFACE = 1, + FIMD_CPU_INTERFACE = 2, +}; + +enum exynos_fb_rgb_mode_t { + MODE_RGB_P = 0, + MODE_BGR_P = 1, + MODE_RGB_S = 2, + MODE_BGR_S = 3, +}; + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_freq; /* Frequency */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel */ + + /* Horizontal control register. Timing from data sheet */ + u_char vl_hspw; /* Horz sync pulse width */ + u_char vl_hfpd; /* Wait before of line */ + u_char vl_hbpd; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vspw; /* Vertical sync pulse width */ + u_char vl_vfpd; /* Wait before of frame */ + u_char vl_vbpd; /* Wait end of frame */ + u_char vl_cmd_allow_len; /* Wait end of frame */ + + unsigned int win_id; + unsigned int init_delay; + unsigned int power_on_delay; + unsigned int reset_delay; + unsigned int interface_mode; + unsigned int mipi_enabled; + unsigned int dp_enabled; + unsigned int cs_setup; + unsigned int wr_setup; + unsigned int wr_act; + unsigned int wr_hold; + unsigned int logo_on; + unsigned int logo_width; + unsigned int logo_height; + int logo_x_offset; + int logo_y_offset; + unsigned long logo_addr; + unsigned int rgb_mode; + unsigned int resolution; + + /* parent clock name(MPLL, EPLL or VPLL) */ + unsigned int pclk_name; + /* ratio value for source clock from parent clock. */ + unsigned int sclk_div; + + unsigned int dual_lcd_enabled; +} vidinfo_t; + +void init_panel_info(vidinfo_t *vid); + +#endif diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h new file mode 100644 index 0000000..8c89a19 --- /dev/null +++ b/include/fdt_simplefb.h @@ -0,0 +1,14 @@ +/* + * Simplefb device tree support + * + * (C) Copyright 2015 + * Stephen Warren <swarren@wwwdotorg.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _FDT_SIMPLEFB_H_ +#define _FDT_SIMPLEFB_H_ +int lcd_dt_simplefb_add_node(void *blob); +int lcd_dt_simplefb_enable_existing_node(void *blob); +#endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 75af750..1bc70db 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -115,9 +115,6 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ COMPAT_NVIDIA_TEGRA30_USB, /* Tegra30 USB port */ COMPAT_NVIDIA_TEGRA114_USB, /* Tegra114 USB port */ - COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ - COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ - COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ @@ -127,9 +124,6 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA124_SDMMC, /* Tegra124 SDMMC controller */ COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ - COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */ - COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */ - COMPAT_NVIDIA_TEGRA114_SPI, /* Tegra 114 SPI controller */ COMPAT_NVIDIA_TEGRA124_PCIE, /* Tegra 124 PCIe controller */ COMPAT_NVIDIA_TEGRA30_PCIE, /* Tegra 30 PCIe controller */ COMPAT_NVIDIA_TEGRA20_PCIE, /* Tegra 20 PCIe controller */ @@ -140,7 +134,6 @@ enum fdt_compat_id { COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */ COMPAT_SAMSUNG_EXYNOS5_SOUND, /* Exynos Sound */ COMPAT_WOLFSON_WM8994_CODEC, /* Wolfson WM8994 Sound Codec */ - COMPAT_SAMSUNG_EXYNOS_SPI, /* Exynos SPI */ COMPAT_GOOGLE_CROS_EC, /* Google CROS_EC Protocol */ COMPAT_GOOGLE_CROS_EC_KEYB, /* Google CROS_EC Keyboard */ COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */ @@ -173,42 +166,64 @@ enum fdt_compat_id { COMPAT_INTEL_MODEL_206AX, /* Intel Model 206AX CPU */ COMPAT_INTEL_GMA, /* Intel Graphics Media Accelerator */ COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */ + COMPAT_INTEL_ICH_SPI, /* Intel ICH7/9 SPI controller */ + COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */ COMPAT_COUNT, }; -/* GPIOs are numbered from 0 */ -enum { - FDT_GPIO_NONE = -1U, /* an invalid GPIO used to end our list */ - - FDT_GPIO_ACTIVE_LOW = 1 << 0, /* input is active low (else high) */ -}; - -/* This is the state of a GPIO pin as defined by the fdt */ -struct fdt_gpio_state { - const char *name; /* name of the fdt property defining this */ - uint gpio; /* GPIO number, or FDT_GPIO_NONE if none */ - u8 flags; /* FDT_GPIO_... flags */ +#define MAX_PHANDLE_ARGS 16 +struct fdtdec_phandle_args { + int node; + int args_count; + uint32_t args[MAX_PHANDLE_ARGS]; }; -/* This tells us whether a fdt_gpio_state record is valid or not */ -#define fdt_gpio_isvalid(x) ((x)->gpio != FDT_GPIO_NONE) - /** - * Read the GPIO taking into account the polarity of the pin. + * fdtdec_parse_phandle_with_args() - Find a node pointed by phandle in a list * - * @param gpio pointer to the decoded gpio - * @return value of the gpio if successful, < 0 if unsuccessful - */ -int fdtdec_get_gpio(struct fdt_gpio_state *gpio); - -/** - * Write the GPIO taking into account the polarity of the pin. + * This function is useful to parse lists of phandles and their arguments. + * + * Example: + * + * phandle1: node1 { + * #list-cells = <2>; + * } + * + * phandle2: node2 { + * #list-cells = <1>; + * } + * + * node3 { + * list = <&phandle1 1 2 &phandle2 3>; + * } + * + * To get a device_node of the `node2' node you may call this: + * fdtdec_parse_phandle_with_args(blob, node3, "list", "#list-cells", 0, 1, + * &args); + * + * (This function is a modified version of __of_parse_phandle_with_args() from + * Linux 3.18) + * + * @blob: Pointer to device tree + * @src_node: Offset of device tree node containing a list + * @list_name: property name that contains a list + * @cells_name: property name that specifies the phandles' arguments count, + * or NULL to use @cells_count + * @cells_count: Cell count to use if @cells_name is NULL + * @index: index of a phandle to parse out + * @out_args: optional pointer to output arguments structure (will be filled) + * @return 0 on success (with @out_args filled out if not NULL), -ENOENT if + * @list_name does not exist, a phandle was not found, @cells_name + * could not be found, the arguments were truncated or there were too + * many arguments. * - * @param gpio pointer to the decoded gpio - * @return 0 if successful */ -int fdtdec_set_gpio(struct fdt_gpio_state *gpio, int val); +int fdtdec_parse_phandle_with_args(const void *blob, int src_node, + const char *list_name, + const char *cells_name, + int cell_count, int index, + struct fdtdec_phandle_args *out_args); /** * Find the next numbered alias for a peripheral. This is used to enumerate @@ -591,50 +606,6 @@ const u32 *fdtdec_locate_array(const void *blob, int node, int fdtdec_get_bool(const void *blob, int node, const char *prop_name); /** - * Decode a single GPIOs from an FDT. - * - * If the property is not found, then the GPIO structure will still be - * initialised, with gpio set to FDT_GPIO_NONE. This makes it easy to - * provide optional GPIOs. - * - * @param blob FDT blob to use - * @param node Node to look at - * @param prop_name Node property name - * @param gpio gpio elements to fill from FDT - * @return 0 if ok, -FDT_ERR_NOTFOUND if the property is missing. - */ -int fdtdec_decode_gpio(const void *blob, int node, const char *prop_name, - struct fdt_gpio_state *gpio); - -/** - * Decode a list of GPIOs from an FDT. This creates a list of GPIOs with no - * terminating item. - * - * @param blob FDT blob to use - * @param node Node to look at - * @param prop_name Node property name - * @param gpio Array of gpio elements to fill from FDT. This will be - * untouched if either 0 or an error is returned - * @param max_count Maximum number of elements allowed - * @return number of GPIOs read if ok, -FDT_ERR_BADLAYOUT if max_count would - * be exceeded, or -FDT_ERR_NOTFOUND if the property is missing. - */ -int fdtdec_decode_gpios(const void *blob, int node, const char *prop_name, - struct fdt_gpio_state *gpio, int max_count); - -/** - * Set up a GPIO pin according to the provided gpio information. At present this - * just requests the GPIO. - * - * If the gpio is FDT_GPIO_NONE, no action is taken. This makes it easy to - * deal with optional GPIOs. - * - * @param gpio GPIO info to use for set up - * @return 0 if all ok or gpio was FDT_GPIO_NONE; -1 on error - */ -int fdtdec_setup_gpio(struct fdt_gpio_state *gpio); - -/** * Look in the FDT for a config item with the given name and return its value * as a 32-bit integer. The property must have at least 4 bytes of data. The * value of the first cell is returned. diff --git a/include/fpga.h b/include/fpga.h index 914024c..e0d1298 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -49,18 +49,19 @@ typedef enum { } bitstream_type; /* root function definitions */ -extern void fpga_init(void); -extern int fpga_add(fpga_type devtype, void *desc); -extern int fpga_count(void); -extern int fpga_load(int devnum, const void *buf, size_t bsize, - bitstream_type bstype); -extern int fpga_fsload(int devnum, const void *buf, size_t size, - fpga_fs_info *fpga_fsinfo); -extern int fpga_loadbitstream(int devnum, char *fpgadata, size_t size, - bitstream_type bstype); -extern int fpga_dump(int devnum, const void *buf, size_t bsize); -extern int fpga_info(int devnum); -extern const fpga_desc *const fpga_validate(int devnum, const void *buf, - size_t bsize, char *fn); +void fpga_init(void); +int fpga_add(fpga_type devtype, void *desc); +int fpga_count(void); +const fpga_desc *const fpga_get_desc(int devnum); +int fpga_load(int devnum, const void *buf, size_t bsize, + bitstream_type bstype); +int fpga_fsload(int devnum, const void *buf, size_t size, + fpga_fs_info *fpga_fsinfo); +int fpga_loadbitstream(int devnum, char *fpgadata, size_t size, + bitstream_type bstype); +int fpga_dump(int devnum, const void *buf, size_t bsize); +int fpga_info(int devnum); +const fpga_desc *const fpga_validate(int devnum, const void *buf, + size_t bsize, char *fn); #endif /* _FPGA_H_ */ diff --git a/include/fs.h b/include/fs.h index ffb6ce7..fd1e4ab 100644 --- a/include/fs.h +++ b/include/fs.h @@ -109,4 +109,10 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); +/* + * Determine the type of the specified filesystem and print it. Optionally it is + * possible to store the type directly in env. + */ +int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + #endif /* _FS_H */ diff --git a/include/fsl_ddr.h b/include/fsl_ddr.h index 675557a..3286c95 100644 --- a/include/fsl_ddr.h +++ b/include/fsl_ddr.h @@ -23,9 +23,15 @@ #ifdef CONFIG_SYS_FSL_DDR_LE #define ddr_in32(a) in_le32(a) #define ddr_out32(a, v) out_le32(a, v) +#define ddr_setbits32(a, v) setbits_le32(a, v) +#define ddr_clrbits32(a, v) clrbits_le32(a, v) +#define ddr_clrsetbits32(a, clear, set) clrsetbits_le32(a, clear, set) #else #define ddr_in32(a) in_be32(a) #define ddr_out32(a, v) out_be32(a, v) +#define ddr_setbits32(a, v) setbits_be32(a, v) +#define ddr_clrbits32(a, v) clrbits_be32(a, v) +#define ddr_clrsetbits32(a, clear, set) clrsetbits_be32(a, clear, set) #endif #define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR diff --git a/include/hash.h b/include/hash.h index d8ec4f0..f4eb100 100644 --- a/include/hash.h +++ b/include/hash.h @@ -17,7 +17,6 @@ enum { HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ }; -#ifndef USE_HOSTCC #if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY) #define CONFIG_HASH_VERIFY #endif @@ -77,6 +76,7 @@ struct hash_algo { int size); }; +#ifndef USE_HOSTCC /** * hash_command: Process a hash command for a particular algorithm * @@ -115,6 +115,23 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, uint8_t *output, int *output_size); /** + * hash_show() - Print out a hash algorithm and value + * + * You will get a message like this (without a newline at the end): + * + * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257" + * + * @algo: Algorithm used for hash + * @addr: Address of data that was hashed + * @len: Length of data that was hashed + * @output: Hash value to display + */ +void hash_show(struct hash_algo *algo, ulong addr, ulong len, + uint8_t *output); + +#endif /* !USE_HOSTCC */ + +/** * hash_lookup_algo() - Look up the hash_algo struct for an algorithm * * The function returns the pointer to the struct or -EPROTONOSUPPORT if the @@ -128,18 +145,17 @@ int hash_block(const char *algo_name, const void *data, unsigned int len, int hash_lookup_algo(const char *algo_name, struct hash_algo **algop); /** - * hash_show() - Print out a hash algorithm and value + * hash_progressive_lookup_algo() - Look up hash_algo for prog. hash support * - * You will get a message like this (without a newline at the end): + * The function returns the pointer to the struct or -EPROTONOSUPPORT if the + * algorithm is not available with progressive hash support. * - * "sha1 for 9eb3337c ... 9eb3338f ==> 7942ef1df479fd3130f716eb9613d107dab7e257" + * @algo_name: Hash algorithm to look up + * @algop: Pointer to the hash_algo struct if found * - * @algo: Algorithm used for hash - * @addr: Address of data that was hashed - * @len: Length of data that was hashed - * @output: Hash value to display + * @return 0 if ok, -EPROTONOSUPPORT for an unknown algorithm. */ -void hash_show(struct hash_algo *algo, ulong addr, ulong len, - uint8_t *output); -#endif /* !USE_HOSTCC */ +int hash_progressive_lookup_algo(const char *algo_name, + struct hash_algo **algop); + #endif diff --git a/include/i2c.h b/include/i2c.h index 9c6a60c..27fe00f 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -39,8 +39,8 @@ enum dm_i2c_chip_flags { * An I2C chip is a device on the I2C bus. It sits at a particular address * and normally supports 7-bit or 10-bit addressing. * - * To obtain this structure, use dev_get_parentdata(dev) where dev is the - * chip to examine. + * To obtain this structure, use dev_get_parent_platdata(dev) where dev is + * the chip to examine. * * @chip_addr: Chip address on bus * @offset_len: Length of offset in bytes. A single byte offset can @@ -75,7 +75,7 @@ struct dm_i2c_bus { }; /** - * i2c_read() - read bytes from an I2C chip + * dm_i2c_read() - read bytes from an I2C chip * * To obtain an I2C device (called a 'chip') given the I2C bus address you * can use i2c_get_chip(). To obtain a bus by bus number use @@ -91,13 +91,12 @@ struct dm_i2c_bus { * * @return 0 on success, -ve on failure */ -int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, - int len); +int dm_i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len); /** - * i2c_write() - write bytes to an I2C chip + * dm_i2c_write() - write bytes to an I2C chip * - * See notes for i2c_read() above. + * See notes for dm_i2c_read() above. * * @dev: Chip to write to * @offset: Offset within chip to start writing @@ -106,11 +105,11 @@ int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, * * @return 0 on success, -ve on failure */ -int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, - int len); +int dm_i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, + int len); /** - * i2c_probe() - probe a particular chip address + * dm_i2c_probe() - probe a particular chip address * * This can be useful to check for the existence of a chip on the bus. * It is typically implemented by writing the chip address to the bus @@ -122,8 +121,8 @@ int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, * @devp: Returns the device found, or NULL if none * @return 0 if a chip was found at that address, -ve if not */ -int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, - struct udevice **devp); +int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, + struct udevice **devp); /** * i2c_set_bus_speed() - set the speed of a bus @@ -185,6 +184,80 @@ int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len); */ int i2c_deblock(struct udevice *bus); +#ifdef CONFIG_DM_I2C_COMPAT +/** + * i2c_probe() - Compatibility function for driver model + * + * Calls dm_i2c_probe() on the current bus + */ +int i2c_probe(uint8_t chip_addr); + +/** + * i2c_read() - Compatibility function for driver model + * + * Calls dm_i2c_read() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_write() - Compatibility function for driver model + * + * Calls dm_i2c_write() with the device corresponding to @chip_addr, and offset + * set to @addr. @alen must match the current setting for the device. + */ +int i2c_write(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, + int len); + +/** + * i2c_get_bus_num_fdt() - Compatibility function for driver model + * + * @return the bus number associated with the given device tree node + */ +int i2c_get_bus_num_fdt(int node); + +/** + * i2c_get_bus_num() - Compatibility function for driver model + * + * @return the 'current' bus number + */ +unsigned int i2c_get_bus_num(void); + +/** + * i2c_set_bus_num() - Compatibility function for driver model + * + * Sets the 'current' bus + */ +int i2c_set_bus_num(unsigned int bus); + +static inline void I2C_SET_BUS(unsigned int bus) +{ + i2c_set_bus_num(bus); +} + +static inline unsigned int I2C_GET_BUS(void) +{ + return i2c_get_bus_num(); +} + +/** + * i2c_init() - Compatibility function for driver model + * + * This function does nothing. + */ +void i2c_init(int speed, int slaveaddr); + +/** + * board_i2c_init() - Compatibility function for driver model + * + * @param blob Device tree blbo + * @return the number of I2C bus + */ +void board_i2c_init(const void *blob); + +#endif + /* * Not all of these flags are implemented in the U-Boot API */ @@ -330,10 +403,12 @@ struct dm_i2c_ops { * * @bus: Bus to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); +int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_get_chip() - get a device to use to access a chip on a bus number @@ -343,10 +418,12 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp); * * @busnum: Bus number to examine * @chip_addr: Chip address for the new device + * @offset_len: Length of a register offset in bytes (normally 1) * @devp: Returns pointer to new device if found or -ENODEV if not * found */ -int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp); +int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, + struct udevice **devp); /** * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data diff --git a/include/image.h b/include/image.h index ee3afe3..0e6af00 100644 --- a/include/image.h +++ b/include/image.h @@ -751,6 +751,7 @@ int fit_parse_conf(const char *spec, ulong addr_curr, int fit_parse_subimage(const char *spec, ulong addr_curr, ulong *addr, const char **image_name); +int fit_get_subimage_count(const void *fit, int images_noffset); void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); @@ -927,8 +928,9 @@ struct checksum_algo { #if IMAGE_ENABLE_SIGN const EVP_MD *(*calculate_sign)(void); #endif - void (*calculate)(const struct image_region region[], - int region_count, uint8_t *checksum); + int (*calculate)(const char *name, + const struct image_region region[], + int region_count, uint8_t *checksum); const uint8_t *rsa_padding; }; diff --git a/include/lcd.h b/include/lcd.h index 160f940..f049fd3 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -13,21 +13,19 @@ #ifndef _LCD_H_ #define _LCD_H_ #include <lcd_console.h> +#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) +#include <bmp_layout.h> +#include <asm/byteorder.h> +#endif extern char lcd_is_enabled; - extern int lcd_line_length; - extern struct vidinfo panel_info; void lcd_ctrl_init(void *lcdbase); void lcd_enable(void); - -/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue); -void lcd_initcolregs(void); -/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */ struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp, void **alloc_addr); int bmp_display(ulong addr, int x, int y); @@ -41,227 +39,38 @@ int bmp_display(ulong addr, int x, int y); void lcd_set_flush_dcache(int flush); #if defined CONFIG_MPC823 -/* - * LCD controller stucture for MPC823 CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_wbl; /* Wait between lines */ - - /* Vertical control register */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_lcdac; /* LCD AC timing */ - u_char vl_wbf; /* Wait between frames */ -} vidinfo_t; - +#include <mpc823_lcd.h> #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ defined CONFIG_CPU_MONAHANS -/* - * PXA LCD DMA descriptor - */ -struct pxafb_dma_descriptor { - u_long fdadr; /* Frame descriptor address register */ - u_long fsadr; /* Frame source address register */ - u_long fidr; /* Frame ID register */ - u_long ldcmd; /* Command register */ -}; - -/* - * PXA LCD info - */ -struct pxafb_info { - - /* Misc registers */ - u_long reg_lccr3; - u_long reg_lccr2; - u_long reg_lccr1; - u_long reg_lccr0; - u_long fdadr0; - u_long fdadr1; - - /* DMA descriptors */ - struct pxafb_dma_descriptor * dmadesc_fblow; - struct pxafb_dma_descriptor * dmadesc_fbhigh; - struct pxafb_dma_descriptor * dmadesc_palette; - - u_long screen; /* physical address of frame buffer */ - u_long palette; /* physical address of palette memory */ - u_int palette_size; -}; - -/* - * LCD controller stucture for PXA CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_hpw; /* Horz sync pulse width */ - u_char vl_blw; /* Wait before of line */ - u_char vl_elw; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_bfw; /* Wait before of frame */ - u_char vl_efw; /* Wait end of frame */ - - /* PXA LCD controller params */ - struct pxafb_info pxa; -} vidinfo_t; - +#include <pxa_lcd.h> #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD) - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - u_long vl_clk; /* pixel clock in ps */ - - /* LCD configuration register */ - u_long vl_sync; /* Horizontal / vertical sync */ - u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_long vl_tft; /* 0 = passive, 1 = TFT */ - u_long vl_cont_pol_low; /* contrast polarity is low */ - u_long vl_clk_pol; /* clock polarity */ - - /* Horizontal control register. */ - u_long vl_hsync_len; /* Length of horizontal sync */ - u_long vl_left_margin; /* Time from sync to picture */ - u_long vl_right_margin; /* Time from picture to sync */ - - /* Vertical control register. */ - u_long vl_vsync_len; /* Length of vertical sync */ - u_long vl_upper_margin; /* Time from sync to picture */ - u_long vl_lower_margin; /* Time from picture to sync */ - - u_long mmio; /* Memory mapped registers */ -} vidinfo_t; - +#include <atmel_lcd.h> #elif defined(CONFIG_EXYNOS_FB) - -enum { - FIMD_RGB_INTERFACE = 1, - FIMD_CPU_INTERFACE = 2, -}; - -enum exynos_fb_rgb_mode_t { - MODE_RGB_P = 0, - MODE_BGR_P = 1, - MODE_RGB_S = 2, - MODE_BGR_S = 3, -}; - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_freq; /* Frequency */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel */ - - /* Horizontal control register. Timing from data sheet */ - u_char vl_hspw; /* Horz sync pulse width */ - u_char vl_hfpd; /* Wait before of line */ - u_char vl_hbpd; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vspw; /* Vertical sync pulse width */ - u_char vl_vfpd; /* Wait before of frame */ - u_char vl_vbpd; /* Wait end of frame */ - u_char vl_cmd_allow_len; /* Wait end of frame */ - - unsigned int win_id; - unsigned int init_delay; - unsigned int power_on_delay; - unsigned int reset_delay; - unsigned int interface_mode; - unsigned int mipi_enabled; - unsigned int dp_enabled; - unsigned int cs_setup; - unsigned int wr_setup; - unsigned int wr_act; - unsigned int wr_hold; - unsigned int logo_on; - unsigned int logo_width; - unsigned int logo_height; - int logo_x_offset; - int logo_y_offset; - unsigned long logo_addr; - unsigned int rgb_mode; - unsigned int resolution; - - /* parent clock name(MPLL, EPLL or VPLL) */ - unsigned int pclk_name; - /* ratio value for source clock from parent clock. */ - unsigned int sclk_div; - - unsigned int dual_lcd_enabled; -} vidinfo_t; - -void init_panel_info(vidinfo_t *vid); - +#include <exynos_lcd.h> #else - typedef struct vidinfo { ushort vl_col; /* Number of columns (i.e. 160) */ ushort vl_row; /* Number of rows (i.e. 100) */ - u_char vl_bpix; /* Bits per pixel, 0 = 1 */ - ushort *cmap; /* Pointer to the colormap */ - void *priv; /* Pointer to driver-specific data */ } vidinfo_t; -#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */ +static __maybe_unused ushort *configuration_get_cmap(void) +{ + return panel_info.cmap; +} +#endif -extern vidinfo_t panel_info; +ushort *configuration_get_cmap(void); -/* Video functions */ +extern vidinfo_t panel_info; -void lcd_putc(const char c); -void lcd_puts(const char *s); -void lcd_printf(const char *fmt, ...); -void lcd_clear(void); -int lcd_display_bitmap(ulong bmp_image, int x, int y); +void lcd_putc(const char c); +void lcd_puts(const char *s); +void lcd_printf(const char *fmt, ...); +void lcd_clear(void); +int lcd_display_bitmap(ulong bmp_image, int x, int y); /** * Get the width of the LCD in pixels @@ -319,20 +128,9 @@ void lcd_show_board_info(void); /* Return the size of the LCD frame buffer, and the line length */ int lcd_get_size(int *line_length); -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); - /* Update the LCD / flush the cache */ void lcd_sync(void); -/************************************************************************/ -/* ** BITMAP DISPLAY SUPPORT */ -/************************************************************************/ -#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) -# include <bmp_layout.h> -# include <asm/byteorder.h> -#endif - /* * Information about displays we are using. This is for configuring * the LCD controller and memory allocation. Someone has to know what @@ -347,38 +145,32 @@ void lcd_sync(void); #define LCD_COLOR8 3 #define LCD_COLOR16 4 #define LCD_COLOR32 5 -/*----------------------------------------------------------------------*/ + #if defined(CONFIG_LCD_INFO_BELOW_LOGO) -# define LCD_INFO_X 0 -# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) +#define LCD_INFO_X 0 +#define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT) #elif defined(CONFIG_LCD_LOGO) -# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH) +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #else -# define LCD_INFO_X VIDEO_FONT_WIDTH -# define LCD_INFO_Y VIDEO_FONT_HEIGHT +#define LCD_INFO_X VIDEO_FONT_WIDTH +#define LCD_INFO_Y VIDEO_FONT_HEIGHT #endif /* Default to 8bpp if bit depth not specified */ #ifndef LCD_BPP -# define LCD_BPP LCD_COLOR8 +#define LCD_BPP LCD_COLOR8 #endif + #ifndef LCD_DF -# define LCD_DF 1 +#define LCD_DF 1 #endif /* Calculate nr. of bits per pixel and nr. of colors */ #define NBITS(bit_code) (1 << (bit_code)) #define NCOLORS(bit_code) (1 << NBITS(bit_code)) -/************************************************************************/ -/* ** CONSOLE CONSTANTS */ -/************************************************************************/ #if LCD_BPP == LCD_COLOR8 - -/* - * 8bpp color definitions - */ # define CONSOLE_COLOR_BLACK 0 # define CONSOLE_COLOR_RED 1 # define CONSOLE_COLOR_GREEN 2 @@ -387,38 +179,25 @@ void lcd_sync(void); # define CONSOLE_COLOR_MAGENTA 5 # define CONSOLE_COLOR_CYAN 6 # define CONSOLE_COLOR_GREY 14 -# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ - +# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */ #elif LCD_BPP == LCD_COLOR32 -/* - * 32bpp color definitions - */ -# define CONSOLE_COLOR_RED 0x00ff0000 -# define CONSOLE_COLOR_GREEN 0x0000ff00 -# define CONSOLE_COLOR_YELLOW 0x00ffff00 -# define CONSOLE_COLOR_BLUE 0x000000ff -# define CONSOLE_COLOR_MAGENTA 0x00ff00ff -# define CONSOLE_COLOR_CYAN 0x0000ffff -# define CONSOLE_COLOR_GREY 0x00aaaaaa -# define CONSOLE_COLOR_BLACK 0x00000000 -# define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest*/ -# define NBYTES(bit_code) (NBITS(bit_code) >> 3) - -#else - -/* - * 16bpp color definitions - */ -# define CONSOLE_COLOR_BLACK 0x0000 -# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ - +#define CONSOLE_COLOR_RED 0x00ff0000 +#define CONSOLE_COLOR_GREEN 0x0000ff00 +#define CONSOLE_COLOR_YELLOW 0x00ffff00 +#define CONSOLE_COLOR_BLUE 0x000000ff +#define CONSOLE_COLOR_MAGENTA 0x00ff00ff +#define CONSOLE_COLOR_CYAN 0x0000ffff +#define CONSOLE_COLOR_GREY 0x00aaaaaa +#define CONSOLE_COLOR_BLACK 0x00000000 +#define CONSOLE_COLOR_WHITE 0x00ffffff /* Must remain last / highest */ +#define NBYTES(bit_code) (NBITS(bit_code) >> 3) +#else /* 16bpp color definitions */ +#define CONSOLE_COLOR_BLACK 0x0000 +#define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */ #endif /* color definitions */ -/************************************************************************/ #ifndef PAGE_SIZE -# define PAGE_SIZE 4096 +#define PAGE_SIZE 4096 #endif -/************************************************************************/ - #endif /* _LCD_H_ */ diff --git a/include/linker_lists.h b/include/linker_lists.h index d37fba4..940c871 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -23,7 +23,7 @@ /** * A linker list is constructed by grouping together linker input - * sections, each containning one entry of the list. Each input section + * sections, each containing one entry of the list. Each input section * contains a constant initialized variable which holds the entry's * content. Linker list input sections are constructed from the list * and entry names, plus a prefix which allows grouping all lists @@ -39,7 +39,7 @@ * This ensures uniqueness for both input section and C variable name. * * Note that the names differ only in the first character, "." for the - * setion and "_" for the variable, so that the linker cannot confuse + * section and "_" for the variable, so that the linker cannot confuse * section and symbol names. From now on, both names will be referred * to as * diff --git a/include/linux/compat.h b/include/linux/compat.h index b40133c..6eac17f 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -262,7 +262,6 @@ typedef struct { /* from include/linux/types.h */ -typedef int atomic_t; /** * struct callback_head - callback structure for use with RCU and task_work * @next: next update requests in a list diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h new file mode 100644 index 0000000..c8c5659 --- /dev/null +++ b/include/linux/compiler-gcc5.h @@ -0,0 +1,65 @@ +#ifndef __LINUX_COMPILER_H +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." +#endif + +#define __used __attribute__((__used__)) +#define __must_check __attribute__((warn_unused_result)) +#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) + +/* Mark functions as cold. gcc will assume any path leading to a call + to them will be unlikely. This means a lot of manual unlikely()s + are unnecessary now for any paths leading to the usual suspects + like BUG(), printk(), panic() etc. [but let's keep them for now for + older compilers] + + Early snapshots of gcc 4.3 don't support this and we can't detect this + in the preprocessor, but we can live with this because they're unreleased. + Maketime probing would be overkill here. + + gcc also has a __attribute__((__hot__)) to move hot functions into + a special section, but I don't see any sense in this right now in + the kernel context */ +#define __cold __attribute__((__cold__)) + +#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) + +#ifndef __CHECKER__ +# define __compiletime_warning(message) __attribute__((warning(message))) +# define __compiletime_error(message) __attribute__((error(message))) +#endif /* __CHECKER__ */ + +/* + * Mark a position in code as unreachable. This can be used to + * suppress control flow warnings after asm blocks that transfer + * control elsewhere. + * + * Early snapshots of gcc 4.5 don't support this and we can't detect + * this in the preprocessor, but we can live with this because they're + * unreleased. Really, we need to have autoconf for the kernel. + */ +#define unreachable() __builtin_unreachable() + +/* Mark a function definition as prohibited from being cloned. */ +#define __noclone __attribute__((__noclone__)) + +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) + +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) + +#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +#define __HAVE_BUILTIN_BSWAP32__ +#define __HAVE_BUILTIN_BSWAP64__ +#define __HAVE_BUILTIN_BSWAP16__ +#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ diff --git a/include/mipi_display.h b/include/mipi_display.h new file mode 100644 index 0000000..ddcc8ca --- /dev/null +++ b/include/mipi_display.h @@ -0,0 +1,130 @@ +/* + * Defines for Mobile Industry Processor Interface (MIPI(R)) + * Display Working Group standards: DSI, DCS, DBI, DPI + * + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * Copyright (C) 2006 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef MIPI_DISPLAY_H +#define MIPI_DISPLAY_H + +/* MIPI DSI Processor-to-Peripheral transaction types */ +enum { + MIPI_DSI_V_SYNC_START = 0x01, + MIPI_DSI_V_SYNC_END = 0x11, + MIPI_DSI_H_SYNC_START = 0x21, + MIPI_DSI_H_SYNC_END = 0x31, + + MIPI_DSI_COLOR_MODE_OFF = 0x02, + MIPI_DSI_COLOR_MODE_ON = 0x12, + MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22, + MIPI_DSI_TURN_ON_PERIPHERAL = 0x32, + + MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03, + MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13, + MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23, + + MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04, + MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14, + MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24, + + MIPI_DSI_DCS_SHORT_WRITE = 0x05, + MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15, + + MIPI_DSI_DCS_READ = 0x06, + + MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, + + MIPI_DSI_END_OF_TRANSMISSION = 0x08, + + MIPI_DSI_NULL_PACKET = 0x09, + MIPI_DSI_BLANKING_PACKET = 0x19, + MIPI_DSI_GENERIC_LONG_WRITE = 0x29, + MIPI_DSI_DCS_LONG_WRITE = 0x39, + + MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c, + + MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d, + MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d, + MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d, + + MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e, + MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e, + MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e, + MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e, +}; + +/* MIPI DSI Peripheral-to-Processor transaction types */ +enum { + MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT = 0x02, + MIPI_DSI_RX_END_OF_TRANSMISSION = 0x08, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE = 0x11, + MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE = 0x12, + MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE = 0x1a, + MIPI_DSI_RX_DCS_LONG_READ_RESPONSE = 0x1c, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE = 0x21, + MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE = 0x22, +}; + +/* MIPI DCS commands */ +enum { + MIPI_DCS_NOP = 0x00, + MIPI_DCS_SOFT_RESET = 0x01, + MIPI_DCS_GET_DISPLAY_ID = 0x04, + MIPI_DCS_GET_RED_CHANNEL = 0x06, + MIPI_DCS_GET_GREEN_CHANNEL = 0x07, + MIPI_DCS_GET_BLUE_CHANNEL = 0x08, + MIPI_DCS_GET_DISPLAY_STATUS = 0x09, + MIPI_DCS_GET_POWER_MODE = 0x0A, + MIPI_DCS_GET_ADDRESS_MODE = 0x0B, + MIPI_DCS_GET_PIXEL_FORMAT = 0x0C, + MIPI_DCS_GET_DISPLAY_MODE = 0x0D, + MIPI_DCS_GET_SIGNAL_MODE = 0x0E, + MIPI_DCS_GET_DIAGNOSTIC_RESULT = 0x0F, + MIPI_DCS_ENTER_SLEEP_MODE = 0x10, + MIPI_DCS_EXIT_SLEEP_MODE = 0x11, + MIPI_DCS_ENTER_PARTIAL_MODE = 0x12, + MIPI_DCS_ENTER_NORMAL_MODE = 0x13, + MIPI_DCS_EXIT_INVERT_MODE = 0x20, + MIPI_DCS_ENTER_INVERT_MODE = 0x21, + MIPI_DCS_SET_GAMMA_CURVE = 0x26, + MIPI_DCS_SET_DISPLAY_OFF = 0x28, + MIPI_DCS_SET_DISPLAY_ON = 0x29, + MIPI_DCS_SET_COLUMN_ADDRESS = 0x2A, + MIPI_DCS_SET_PAGE_ADDRESS = 0x2B, + MIPI_DCS_WRITE_MEMORY_START = 0x2C, + MIPI_DCS_WRITE_LUT = 0x2D, + MIPI_DCS_READ_MEMORY_START = 0x2E, + MIPI_DCS_SET_PARTIAL_AREA = 0x30, + MIPI_DCS_SET_SCROLL_AREA = 0x33, + MIPI_DCS_SET_TEAR_OFF = 0x34, + MIPI_DCS_SET_TEAR_ON = 0x35, + MIPI_DCS_SET_ADDRESS_MODE = 0x36, + MIPI_DCS_SET_SCROLL_START = 0x37, + MIPI_DCS_EXIT_IDLE_MODE = 0x38, + MIPI_DCS_ENTER_IDLE_MODE = 0x39, + MIPI_DCS_SET_PIXEL_FORMAT = 0x3A, + MIPI_DCS_WRITE_MEMORY_CONTINUE = 0x3C, + MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, + MIPI_DCS_SET_TEAR_SCANLINE = 0x44, + MIPI_DCS_GET_SCANLINE = 0x45, + MIPI_DCS_READ_DDB_START = 0xA1, + MIPI_DCS_READ_DDB_CONTINUE = 0xA8, +}; + +/* MIPI DCS pixel formats */ +#define MIPI_DCS_PIXEL_FMT_24BIT 7 +#define MIPI_DCS_PIXEL_FMT_18BIT 6 +#define MIPI_DCS_PIXEL_FMT_16BIT 5 +#define MIPI_DCS_PIXEL_FMT_12BIT 3 +#define MIPI_DCS_PIXEL_FMT_8BIT 2 +#define MIPI_DCS_PIXEL_FMT_3BIT 1 + +#endif diff --git a/include/mmc.h b/include/mmc.h index 7ec255d..56d97bb 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -147,11 +147,16 @@ /* * EXT_CSD fields */ +#define EXT_CSD_ENH_START_ADDR 136 /* R/W */ +#define EXT_CSD_ENH_SIZE_MULT 140 /* R/W */ #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_SETTING 155 /* R/W */ #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ +#define EXT_CSD_MAX_ENH_SIZE_MULT 157 /* R */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_WR_REL_PARAM 166 /* R */ +#define EXT_CSD_WR_REL_SET 167 /* R/W */ #define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_BOOT_BUS_WIDTH 177 @@ -201,6 +206,14 @@ #define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0) +#define EXT_CSD_ENH_USR (1 << 0) /* user data area is enhanced */ +#define EXT_CSD_ENH_GP(x) (1 << ((x)+1)) /* GP part (x+1) is enhanced */ + +#define EXT_CSD_HS_CTRL_REL (1 << 0) /* host controlled WR_REL_SET */ + +#define EXT_CSD_WR_DATA_REL_USR (1 << 0) /* user data area WR_REL */ +#define EXT_CSD_WR_DATA_REL_GP(x) (1 << ((x)+1)) /* GP part (x+1) WR_REL */ + #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -224,6 +237,7 @@ #define MMCPART_NOAVAILABLE (0xff) #define PART_ACCESS_MASK (0x7) #define PART_SUPPORT (0x1) +#define ENHNCD_SUPPORT (0x2) #define PART_ENH_ATTRIB (0x1f) /* Maximum block size for MMC */ @@ -302,17 +316,23 @@ struct mmc { uint csd[4]; uint cid[4]; ushort rca; + u8 part_support; + u8 part_attr; + u8 wr_rel_set; char part_config; char part_num; uint tran_speed; uint read_bl_len; uint write_bl_len; - uint erase_grp_size; + uint erase_grp_size; /* in 512-byte sectors */ + uint hc_wp_grp_size; /* in 512-byte sectors */ u64 capacity; u64 capacity_user; u64 capacity_boot; u64 capacity_rpmb; u64 capacity_gp[4]; + u64 enh_user_start; + u64 enh_user_size; block_dev_desc_t block_dev; char op_cond_pending; /* 1 if we are waiting on an op_cond command */ char init_in_progress; /* 1 if we have done mmc_start_init() */ @@ -321,6 +341,27 @@ struct mmc { int ddr_mode; }; +struct mmc_hwpart_conf { + struct { + uint enh_start; /* in 512-byte sectors */ + uint enh_size; /* in 512-byte sectors, if 0 no enh area */ + unsigned wr_rel_change : 1; + unsigned wr_rel_set : 1; + } user; + struct { + uint size; /* in 512-byte sectors */ + unsigned enhanced : 1; + unsigned wr_rel_change : 1; + unsigned wr_rel_set : 1; + } gp_part[4]; +}; + +enum mmc_hwpart_conf_mode { + MMC_HWPART_CONF_CHECK, + MMC_HWPART_CONF_SET, + MMC_HWPART_CONF_COMPLETE, +}; + int mmc_register(struct mmc *mmc); struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); void mmc_destroy(struct mmc *mmc); @@ -333,6 +374,8 @@ int mmc_set_dev(int dev_num); void print_mmc_devices(char separator); int get_mmc_num(void); int mmc_switch_part(int dev_num, unsigned int part_num); +int mmc_hwpart_config(struct mmc *mmc, const struct mmc_hwpart_conf *conf, + enum mmc_hwpart_conf_mode mode); int mmc_getcd(struct mmc *mmc); int board_mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); @@ -395,6 +438,20 @@ int board_mmc_init(bd_t *bis); int cpu_mmc_init(bd_t *bis); int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); +struct pci_device_id; + +/** + * pci_mmc_init() - set up PCI MMC devices + * + * This finds all the matching PCI IDs and sets them up as MMC devices. + * + * @name: Name to use for devices + * @mmc_supported: PCI IDs to search for + * @num_ids: Number of elements in @mmc_supported + */ +int pci_mmc_init(const char *name, struct pci_device_id *mmc_supported, + int num_ids); + /* Set block count limit because of 16 bit register limit on some hardware*/ #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 diff --git a/include/mpc823_lcd.h b/include/mpc823_lcd.h new file mode 100644 index 0000000..7e210e3 --- /dev/null +++ b/include/mpc823_lcd.h @@ -0,0 +1,43 @@ +/* + * mpc823_lcd.h - MPC823 LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MPC823_LCD_H_ +#define _MPC823_LCD_H_ + +/* + * LCD controller stucture for MPC823 CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_wbl; /* Wait between lines */ + + /* Vertical control register */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_lcdac; /* LCD AC timing */ + u_char vl_wbf; /* Wait between frames */ +} vidinfo_t; + +#endif diff --git a/include/net.h b/include/net.h index 3da35fe..73ea88b 100644 --- a/include/net.h +++ b/include/net.h @@ -482,6 +482,36 @@ extern void net_set_ip_header(uchar *pkt, IPaddr_t dest, IPaddr_t source); extern void net_set_udp_header(uchar *pkt, IPaddr_t dest, int dport, int sport, int len); +/** + * compute_ip_checksum() - Compute IP checksum + * + * @addr: Address to check (must be 16-bit aligned) + * @nbytes: Number of bytes to check (normally a multiple of 2) + * @return 16-bit IP checksum + */ +unsigned compute_ip_checksum(const void *addr, unsigned nbytes); + +/** + * add_ip_checksums() - add two IP checksums + * + * @offset: Offset of first sum (if odd we do a byte-swap) + * @sum: First checksum + * @new_sum: New checksum to add + * @return updated 16-bit IP checksum + */ +unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum); + +/** + * ip_checksum_ok() - check if a checksum is correct + * + * This works by making sure the checksum sums to 0 + * + * @addr: Address to check (must be 16-bit aligned) + * @nbytes: Number of bytes to check (normally a multiple of 2) + * @return true if the checksum matches, false if not + */ +int ip_checksum_ok(const void *addr, unsigned nbytes); + /* Checksum */ extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */ extern uint NetCksum(uchar *, int); /* Calculate the checksum */ diff --git a/include/netdev.h b/include/netdev.h index 34651ab..daffc12 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -93,7 +93,8 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); int zynq_gem_of_init(const void *blob); -int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); +int zynq_gem_initialize(bd_t *bis, phys_addr_t base_addr, + int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface * exported by a public hader file, we need a global definition at this point. diff --git a/include/pci.h b/include/pci.h index 7f67ca6..004a048 100644 --- a/include/pci.h +++ b/include/pci.h @@ -644,8 +644,7 @@ extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index); extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index); -extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code, - int wanted_prog_if, int index); +pci_dev_t pci_find_class(unsigned int find_class, int index); extern int pci_hose_config_device(struct pci_controller *hose, pci_dev_t dev, @@ -697,5 +696,14 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, * */ u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); +/** + * pciauto_setup_rom() - Set up access to a device ROM + * + * @hose: PCI hose to use + * @dev: PCI device to adjust + * @return 0 if done, -ve on error + */ +int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 26f4748..dc2ca21 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -1346,6 +1346,7 @@ #define PCI_VENDOR_ID_REALTEK 0x10ec #define PCI_DEVICE_ID_REALTEK_8139 0x8139 +#define PCI_DEVICE_ID_REALTEK_8168 0x8168 #define PCI_VENDOR_ID_XILINX 0x10ee #define PCI_DEVICE_ID_RME_DIGI96 0x3fc0 @@ -2591,9 +2592,17 @@ #define PCI_DEVICE_ID_INTEL_MFD_EMMC0 0x0823 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1 0x0824 #define PCI_DEVICE_ID_INTEL_MRST_SD2 0x084F +#define PCI_DEVICE_ID_INTEL_QRK_SDIO 0x08A7 +#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 +#define PCI_DEVICE_ID_INTEL_QRK_EMAC 0x0937 +#define PCI_DEVICE_ID_INTEL_QRK_ILB 0x095E #define PCI_DEVICE_ID_INTEL_I960 0x0960 #define PCI_DEVICE_ID_INTEL_I960RM 0x0962 #define PCI_DEVICE_ID_INTEL_CENTERTON_ILB 0x0c60 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SDCARD 0x0f16 +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC 0x0f1c +#define PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA 0x0f23 #define PCI_DEVICE_ID_INTEL_82541ER 0x1078 #define PCI_DEVICE_ID_INTEL_82541GI_LF 0x107c #define PCI_DEVICE_ID_INTEL_82542 0x1000 diff --git a/include/pci_rom.h b/include/pci_rom.h index 8b2674c..2f1665d 100644 --- a/include/pci_rom.h +++ b/include/pci_rom.h @@ -8,7 +8,6 @@ #define _PCI_ROM_H #define PCI_ROM_HDR 0xaa55 -#define PCI_VGA_RAM_IMAGE_START 0xc0000 struct pci_rom_header { uint16_t signature; @@ -34,14 +33,25 @@ struct pci_rom_data { uint16_t reserved_2; }; +/* + * Determines which execution method is used and whether we allow falling back + * to the other if the requested method is not available. + */ +enum pci_rom_emul { + PCI_ROM_EMULATE = 0 << 0, + PCI_ROM_USE_NATIVE = 1 << 0, + PCI_ROM_ALLOW_FALLBACK = 1 << 1, +}; + /** * pci_run_vga_bios() - Run the VGA BIOS in an x86 PC * * @dev: Video device containing the BIOS * @int15_handler: Function to call to handle int 0x15 - * @emulate: true to use the x86 emulator, false to run native + * @exec_method: flags from enum pci_rom_emul */ -int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), bool emulate); +int pci_run_vga_bios(pci_dev_t dev, int (*int15_handler)(void), + int exec_method); /** * board_map_oprom_vendev() - map several PCI IDs to the one the ROM expects diff --git a/include/phy.h b/include/phy.h index 1e282e2..d117fc1 100644 --- a/include/phy.h +++ b/include/phy.h @@ -225,6 +225,7 @@ int gen10g_startup(struct phy_device *phydev); int gen10g_shutdown(struct phy_device *phydev); int gen10g_discover_mmds(struct phy_device *phydev); +int phy_aquantia_init(void); int phy_atheros_init(void); int phy_broadcom_init(void); int phy_cortina_init(void); diff --git a/include/pxa_lcd.h b/include/pxa_lcd.h new file mode 100644 index 0000000..723f6ab --- /dev/null +++ b/include/pxa_lcd.h @@ -0,0 +1,80 @@ +/* + * pxa_lcd.h - PXA LCD Controller structures + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PXA_LCD_H_ +#define _PXA_LCD_H_ + +/* + * PXA LCD DMA descriptor + */ +struct pxafb_dma_descriptor { + u_long fdadr; /* Frame descriptor address register */ + u_long fsadr; /* Frame source address register */ + u_long fidr; /* Frame ID register */ + u_long ldcmd; /* Command register */ +}; + +/* + * PXA LCD info + */ +struct pxafb_info { + /* Misc registers */ + u_long reg_lccr3; + u_long reg_lccr2; + u_long reg_lccr1; + u_long reg_lccr0; + u_long fdadr0; + u_long fdadr1; + + /* DMA descriptors */ + struct pxafb_dma_descriptor *dmadesc_fblow; + struct pxafb_dma_descriptor *dmadesc_fbhigh; + struct pxafb_dma_descriptor *dmadesc_palette; + + u_long screen; /* physical address of frame buffer */ + u_long palette; /* physical address of palette memory */ + u_int palette_size; +}; + +/* + * LCD controller stucture for PXA CPU + */ +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 640) */ + ushort vl_row; /* Number of rows (i.e. 480) */ + ushort vl_width; /* Width of display area in millimeters */ + ushort vl_height; /* Height of display area in millimeters */ + + /* LCD configuration register */ + u_char vl_clkp; /* Clock polarity */ + u_char vl_oep; /* Output Enable polarity */ + u_char vl_hsp; /* Horizontal Sync polarity */ + u_char vl_vsp; /* Vertical Sync polarity */ + u_char vl_dp; /* Data polarity */ + u_char vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ + u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ + u_char vl_splt;/* Split display, 0 = single-scan, 1 = dual-scan */ + u_char vl_clor; /* Color, 0 = mono, 1 = color */ + u_char vl_tft; /* 0 = passive, 1 = TFT */ + + /* Horizontal control register. Timing from data sheet */ + ushort vl_hpw; /* Horz sync pulse width */ + u_char vl_blw; /* Wait before of line */ + u_char vl_elw; /* Wait end of line */ + + /* Vertical control register. */ + u_char vl_vpw; /* Vertical sync pulse width */ + u_char vl_bfw; /* Wait before of frame */ + u_char vl_efw; /* Wait end of frame */ + + /* PXA LCD controller params */ + struct pxafb_info pxa; +} vidinfo_t; + +#endif diff --git a/include/rtc.h b/include/rtc.h index d11aa8b..54e361e 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -51,6 +51,38 @@ unsigned long mktime (unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int); /** + * rtc_read8() - Read an 8-bit register + * + * @reg: Register to read + * @return value read + */ +int rtc_read8(int reg); + +/** + * rtc_write8() - Write an 8-bit register + * + * @reg: Register to write + * @value: Value to write + */ +void rtc_write8(int reg, uchar val); + +/** + * rtc_read32() - Read a 32-bit value from the RTC + * + * @reg: Offset to start reading from + * @return value read + */ +u32 rtc_read32(int reg); + +/** + * rtc_write32() - Write a 32-bit value to the RTC + * + * @reg: Register to start writing to + * @value: Value to write + */ +void rtc_write32(int reg, u32 value); + +/** * rtc_init() - Set up the real time clock ready for use */ void rtc_init(void); diff --git a/include/sdhci.h b/include/sdhci.h index aa4a0e9..23893b5 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -12,7 +12,7 @@ #include <asm/io.h> #include <mmc.h> -#include <fdtdec.h> +#include <asm/gpio.h> /* * Controller registers @@ -246,8 +246,8 @@ struct sdhci_host { int index; int bus_width; - struct fdt_gpio_state pwr_gpio; /* Power GPIO */ - struct fdt_gpio_state cd_gpio; /* Card Detect GPIO */ + struct gpio_desc pwr_gpio; /* Power GPIO */ + struct gpio_desc cd_gpio; /* Card Detect GPIO */ void (*set_control_reg)(struct sdhci_host *host); void (*set_clock)(int dev_index, unsigned int div); diff --git a/include/spartan2.h b/include/spartan2.h index 2aca954..14606c3 100644 --- a/include/spartan2.h +++ b/include/spartan2.h @@ -38,7 +38,12 @@ typedef struct { xilinx_post_fn post; } xilinx_spartan2_slave_serial_fns; +#if defined(CONFIG_FPGA_SPARTAN2) extern struct xilinx_fpga_op spartan2_op; +# define FPGA_SPARTAN2_OPS &spartan2_op +#else +# define FPGA_SPARTAN2_OPS NULL +#endif /* Device Image Sizes *********************************************************************/ @@ -61,36 +66,47 @@ extern struct xilinx_fpga_op spartan2_op; *********************************************************************/ /* Spartan-II devices */ #define XILINX_XC2S15_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S30_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S50_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S100_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S150_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S200_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S100E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S150E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S200E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #define XILINX_XC2S300E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie, &spartan2_op } +{ xilinx_spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN2_OPS } #endif /* _SPARTAN2_H_ */ diff --git a/include/spartan3.h b/include/spartan3.h index d6d67a6..fcb27b0 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -40,7 +40,12 @@ typedef struct { xilinx_abort_fn abort; } xilinx_spartan3_slave_serial_fns; +#if defined(CONFIG_FPGA_SPARTAN3) extern struct xilinx_fpga_op spartan3_op; +# define FPGA_SPARTAN3_OPS &spartan3_op +#else +# define FPGA_SPARTAN3_OPS NULL +#endif /* Device Image Sizes *********************************************************************/ @@ -71,48 +76,60 @@ extern struct xilinx_fpga_op spartan3_op; *********************************************************************/ /* Spartan-III devices */ #define XILINX_XC3S50_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S200_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S400_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S1000_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S1500_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S2000_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S4000_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S5000_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } /* Spartan-3E devices */ #define XILINX_XC3S100E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S250E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S500E_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \ { xilinx_spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie, \ - &spartan3_op } + FPGA_SPARTAN3_OPS } #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \ { xilinx_spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie, \ - &spartan3_op } + FPGA_SPARTAN3_OPS } #define XILINX_XC6SLX4_DESC(iface, fn_table, cookie) \ -{ xilinx_spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie, &spartan3_op } +{ xilinx_spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie, \ + FPGA_SPARTAN3_OPS } #endif /* _SPARTAN3_H_ */ diff --git a/include/spi.h b/include/spi.h index ec17bd0..c58e453 100644 --- a/include/spi.h +++ b/include/spi.h @@ -56,20 +56,42 @@ #define SPI_DEFAULT_WORDLEN 8 #ifdef CONFIG_DM_SPI +/* TODO(sjg@chromium.org): Remove this and use max_hz from struct spi_slave */ struct dm_spi_bus { uint max_hz; }; +/** + * struct dm_spi_platdata - platform data for all SPI slaves + * + * This describes a SPI slave, a child device of the SPI bus. To obtain this + * struct from a spi_slave, use dev_get_parent_platdata(dev) or + * dev_get_parent_platdata(slave->dev). + * + * This data is immuatable. Each time the device is probed, @max_hz and @mode + * will be copied to struct spi_slave. + * + * @cs: Chip select number (0..n-1) + * @max_hz: Maximum bus speed that this slave can tolerate + * @mode: SPI mode to use for this device (see SPI mode flags) + */ +struct dm_spi_slave_platdata { + unsigned int cs; + uint max_hz; + uint mode; +}; + #endif /* CONFIG_DM_SPI */ /** * struct spi_slave - Representation of a SPI slave * * For driver model this is the per-child data used by the SPI bus. It can - * be accessed using dev_get_parentdata() on the slave device. Each SPI - * driver should define this child data in its U_BOOT_DRIVER() definition: - * - * .per_child_auto_alloc_size = sizeof(struct spi_slave), + * be accessed using dev_get_parentdata() on the slave device. The SPI uclass + * sets uip per_child_auto_alloc_size to sizeof(struct spi_slave), and the + * driver should not override it. Two platform data fields (max_hz and mode) + * are copied into this structure to provide an initial value. This allows + * them to be changed, since we should never change platform data in drivers. * * If not using driver model, drivers are expected to extend this with * controller-specific data. @@ -97,8 +119,8 @@ struct spi_slave { uint mode; #else unsigned int bus; -#endif unsigned int cs; +#endif u8 op_mode_rx; u8 op_mode_tx; unsigned int wordlen; @@ -545,16 +567,16 @@ int spi_chip_select(struct udevice *slave); int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp); /** - * spi_ofdata_to_platdata() - decode standard SPI platform data + * spi_slave_ofdata_to_platdata() - decode standard SPI platform data * - * This decodes the speed and mode from a device tree node and puts it into - * the spi_slave structure. + * This decodes the speed and mode for a slave from a device tree node * * @blob: Device tree blob * @node: Node offset to read from - * @spi: Place to put the decoded information + * @plat: Place to put the decoded information */ -int spi_ofdata_to_platdata(const void *blob, int node, struct spi_slave *spi); +int spi_slave_ofdata_to_platdata(const void *blob, int node, + struct dm_spi_slave_platdata *plat); /** * spi_cs_info() - Check information on a chip select diff --git a/include/splash.h b/include/splash.h index a60e895..7ae7a68 100644 --- a/include/splash.h +++ b/include/splash.h @@ -22,6 +22,8 @@ #ifndef _SPLASH_H_ #define _SPLASH_H_ +#include <errno.h> + enum splash_storage { SPLASH_STORAGE_NAND, SPLASH_STORAGE_SF, @@ -42,6 +44,15 @@ void splash_get_pos(int *x, int *y); static inline void splash_get_pos(int *x, int *y) { } #endif +#if defined(CONFIG_SPLASH_SCREEN) && defined(CONFIG_LCD) +int lcd_splash(ulong addr); +#else +static inline int lcd_splash(ulong addr) +{ + return -ENOSYS; +} +#endif + #define BMP_ALIGN_CENTER 0x7FFF #endif diff --git a/include/u-boot/rsa-checksum.h b/include/u-boot/rsa-checksum.h index c996fb3..3c69d85 100644 --- a/include/u-boot/rsa-checksum.h +++ b/include/u-boot/rsa-checksum.h @@ -16,9 +16,18 @@ extern const uint8_t padding_sha256_rsa4096[]; extern const uint8_t padding_sha256_rsa2048[]; extern const uint8_t padding_sha1_rsa2048[]; -void sha256_calculate(const struct image_region region[], int region_count, - uint8_t *checksum); -void sha1_calculate(const struct image_region region[], int region_count, - uint8_t *checksum); +/** + * hash_calculate() - Calculate hash over the data + * + * @name: Name of algorithm to be used for hash calculation + * @region: Array having info of regions over which hash needs to be calculated + * @region_count: Number of regions in the region array + * @checksum: Buffer contanining the output hash + * + * @return 0 if OK, < 0 if error + */ +int hash_calculate(const char *name, + const struct image_region region[], int region_count, + uint8_t *checksum); #endif diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h new file mode 100644 index 0000000..fce445a --- /dev/null +++ b/include/u-boot/rsa-mod-exp.h @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2014, Ruchika Gupta. + * + * SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef _RSA_MOD_EXP_H +#define _RSA_MOD_EXP_H + +#include <errno.h> +#include <image.h> + +/** + * struct key_prop - holder for a public key properties + * + * The struct has pointers to modulus (Typically called N), + * The inverse, R^2, exponent. These can be typecasted and + * used as byte arrays or converted to the required format + * as per requirement of RSA implementation. + */ +struct key_prop { + const void *rr; /* R^2 can be treated as byte array */ + const void *modulus; /* modulus as byte array */ + const void *public_exponent; /* public exponent as byte array */ + uint32_t n0inv; /* -1 / modulus[0] mod 2^32 */ + int num_bits; /* Key length in bits */ + uint32_t exp_len; /* Exponent length in number of uint8_t */ +}; + +/** + * rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw + * + * Operation: out[] = sig ^ exponent % modulus + * + * @sig: RSA PKCS1.5 signature + * @sig_len: Length of signature in number of bytes + * @node: Node with RSA key elements like modulus, exponent, R^2, n0inv + * @out: Result in form of byte array of len equal to sig_len + */ +int rsa_mod_exp_sw(const uint8_t *sig, uint32_t sig_len, + struct key_prop *node, uint8_t *out); + +int rsa_mod_exp(struct udevice *dev, const uint8_t *sig, uint32_t sig_len, + struct key_prop *node, uint8_t *out); + +/** + * struct struct mod_exp_ops - Driver model for RSA Modular Exponentiation + * operations + * + * The uclass interface is implemented by all crypto devices which use + * driver model. + */ +struct mod_exp_ops { + /** + * Perform Modular Exponentiation + * + * Operation: out[] = sig ^ exponent % modulus + * + * @dev: RSA Device + * @sig: RSA PKCS1.5 signature + * @sig_len: Length of signature in number of bytes + * @node: Node with RSA key elements like modulus, exponent, + * R^2, n0inv + * @out: Result in form of byte array of len equal to sig_len + * + * This function computes exponentiation over the signature. + * Returns: 0 if exponentiation is successful, or a negative value + * if it wasn't. + */ + int (*mod_exp)(struct udevice *dev, const uint8_t *sig, + uint32_t sig_len, struct key_prop *node, + uint8_t *outp); +}; + +#endif diff --git a/include/usb.h b/include/usb.h index d3c7415..a8fee0b 100644 --- a/include/usb.h +++ b/include/usb.h @@ -120,6 +120,7 @@ struct usb_device { * Each instance needs its own set of data structures. */ unsigned long status; + unsigned long int_pending; /* 1 bit per ep, used by int_queue */ int act_len; /* transfered bytes */ int maxchild; /* Number of ports if hub */ int portnr; @@ -154,11 +155,16 @@ enum usb_init_type { defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \ defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \ defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI) || \ - defined(CONFIG_USB_DWC2) + defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_MUSB_SUNXI) || \ + defined(CONFIG_USB_XHCI) || defined(CONFIG_USB_DWC2) int usb_lowlevel_init(int index, enum usb_init_type init, void **controller); int usb_lowlevel_stop(int index); +#ifdef CONFIG_MUSB_HOST +void usb_reset_root_port(void); +#else +#define usb_reset_root_port() +#endif int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len); @@ -167,9 +173,9 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); -#ifdef CONFIG_USB_EHCI /* Only the ehci code has pollable int support */ +#if defined CONFIG_USB_EHCI || defined CONFIG_MUSB_HOST struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, - int queuesize, int elementsize, void *buffer); + int queuesize, int elementsize, void *buffer, int interval); int destroy_int_queue(struct usb_device *dev, struct int_queue *queue); void *poll_int_queue(struct usb_device *dev, struct int_queue *queue); #endif diff --git a/include/vbe.h b/include/vbe.h index d405691..c5deee9 100644 --- a/include/vbe.h +++ b/include/vbe.h @@ -35,10 +35,14 @@ struct __packed screen_info_input { struct __packed vbe_info { char signature[4]; u16 version; - u8 *oem_string_ptr; + u32 oem_string_ptr; u32 capabilities; - u16 video_mode_list[256]; + u32 modes_ptr; u16 total_memory; + u16 oem_version; + u32 vendor_name_ptr; + u32 product_name_ptr; + u32 product_rev_ptr; }; struct __packed vesa_mode_info { @@ -96,6 +100,7 @@ struct vbe_ddc_info { #define VESA_GET_INFO 0x4f00 #define VESA_GET_MODE_INFO 0x4f01 #define VESA_SET_MODE 0x4f02 +#define VESA_GET_CUR_MODE 0x4f03 struct graphic_device; int vbe_get_video_info(struct graphic_device *gdev); diff --git a/include/virtex2.h b/include/virtex2.h index 7b7825f..503df9a 100644 --- a/include/virtex2.h +++ b/include/virtex2.h @@ -11,8 +11,6 @@ #include <xilinx.h> -extern struct xilinx_fpga_op virtex2_op; - /* * Slave SelectMap Implementation function table. */ @@ -40,12 +38,19 @@ typedef struct { xilinx_wdata_fn wdata; } xilinx_virtex2_slave_serial_fns; +#if defined(CONFIG_FPGA_VIRTEX2) +extern struct xilinx_fpga_op virtex2_op; +# define FPGA_VIRTEX2_OPS &virtex2_op +#else +# define FPGA_VIRTEX2_OPS NULL +#endif + /* Device Image Sizes (in bytes) *********************************************************************/ -#define XILINX_XC2V40_SIZE (338208 / 8) -#define XILINX_XC2V80_SIZE (597408 / 8) -#define XILINX_XC2V250_SIZE (1591584 / 8) -#define XILINX_XC2V500_SIZE (2557857 / 8) +#define XILINX_XC2V40_SIZE (338208 / 8) +#define XILINX_XC2V80_SIZE (597408 / 8) +#define XILINX_XC2V250_SIZE (1591584 / 8) +#define XILINX_XC2V500_SIZE (2557857 / 8) #define XILINX_XC2V1000_SIZE (3749408 / 8) #define XILINX_XC2V1500_SIZE (5166240 / 8) #define XILINX_XC2V2000_SIZE (6808352 / 8) @@ -58,39 +63,51 @@ typedef struct { /* Descriptor Macros *********************************************************************/ #define XILINX_XC2V40_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V80_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V250_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V500_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \ -{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie, &virtex2_op } +{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie, \ + FPGA_VIRTEX2_OPS } #endif /* _VIRTEX2_H_ */ diff --git a/include/vsc9953.h b/include/vsc9953.h new file mode 100644 index 0000000..3d11b87 --- /dev/null +++ b/include/vsc9953.h @@ -0,0 +1,402 @@ +/* + * vsc9953.h + * + * Driver for the Vitesse VSC9953 L2 Switch + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + */ + +#ifndef _VSC9953_H_ +#define _VSC9953_H_ + +#include <config.h> +#include <miiphy.h> +#include <asm/types.h> +#include <malloc.h> + +#define VSC9953_OFFSET (CONFIG_SYS_CCSRBAR_DEFAULT + 0x800000) + +#define VSC9953_SYS_OFFSET 0x010000 +#define VSC9953_DEV_GMII_OFFSET 0x100000 +#define VSC9953_QSYS_OFFSET 0x200000 +#define VSC9953_ANA_OFFSET 0x280000 +#define VSC9953_DEVCPU_GCB 0x070000 +#define VSC9953_ES0 0x040000 +#define VSC9953_IS1 0x050000 +#define VSC9953_IS2 0x060000 + +#define T1040_SWITCH_GMII_DEV_OFFSET 0x010000 +#define VSC9953_PHY_REGS_OFFST 0x0000AC + +#define CONFIG_VSC9953_SOFT_SWC_RST_ENA 0x00000001 +#define CONFIG_VSC9953_CORE_ENABLE 0x80 +#define CONFIG_VSC9953_MEM_ENABLE 0x40 +#define CONFIG_VSC9953_MEM_INIT 0x20 + +#define CONFIG_VSC9953_PORT_ENA 0x00003a00 +#define CONFIG_VSC9953_MAC_ENA_CFG 0x00000011 +#define CONFIG_VSC9953_MAC_MODE_CFG 0x00000011 +#define CONFIG_VSC9953_MAC_IFG_CFG 0x00000515 +#define CONFIG_VSC9953_MAC_HDX_CFG 0x00001043 +#define CONFIG_VSC9953_CLOCK_CFG 0x00000001 +#define CONFIG_VSC9953_CLOCK_CFG_1000M 0x00000001 +#define CONFIG_VSC9953_PFC_FC 0x00000001 +#define CONFIG_VSC9953_PFC_FC_QSGMII 0x00000000 +#define CONFIG_VSC9953_MAC_FC_CFG 0x04700000 +#define CONFIG_VSC9953_MAC_FC_CFG_QSGMII 0x00700000 +#define CONFIG_VSC9953_PAUSE_CFG 0x001ffffe +#define CONFIG_VSC9953_TOT_TAIL_DROP_LVL 0x000003ff +#define CONFIG_VSC9953_FRONT_PORT_MODE 0x00000000 +#define CONFIG_VSC9953_MAC_MAX_LEN 0x000005ee + +#define CONFIG_VSC9953_VCAP_MV_CFG 0x0000ffff +#define CONFIG_VSC9953_VCAP_UPDATE_CTRL 0x01000004 +#define VSC9953_MAX_PORTS 10 +#define VSC9953_PORT_CHECK(port) \ + (((port) < 0 || (port) >= VSC9953_MAX_PORTS) ? 0 : 1) +#define VSC9953_INTERNAL_PORT_CHECK(port) ( \ + ( \ + (port) < VSC9953_MAX_PORTS - 2 || (port) >= VSC9953_MAX_PORTS \ + ) ? 0 : 1 \ +) + +#define DEFAULT_VSC9953_MDIO_NAME "VSC9953_MDIO0" + +#define MIIMIND_OPR_PEND 0x00000004 + +struct vsc9953_mdio_info { + struct vsc9953_mii_mng *regs; + char *name; +}; + +/* VSC9953 ANA structure for T1040 U-boot*/ + +struct vsc9953_ana_port { + u32 vlan_cfg; + u32 drop_cfg; + u32 qos_cfg; + u32 vcap_cfg; + u32 vcap_s1_key_cfg[3]; + u32 vcap_s2_cfg; + u32 qos_pcp_dei_map_cfg[16]; + u32 cpu_fwd_cfg; + u32 cpu_fwd_bpdu_cfg; + u32 cpu_fwd_garp_cfg; + u32 cpu_fwd_ccm_cfg; + u32 port_cfg; + u32 pol_cfg; + u32 reserved[34]; +}; + +struct vsc9953_ana_pol { + u32 pol_pir_cfg; + u32 pol_cir_cfg; + u32 pol_mode_cfg; + u32 pol_pir_state; + u32 pol_cir_state; + u32 reserved1[3]; +}; + +struct vsc9953_ana_ana_tables { + u32 entry_lim[11]; + u32 an_moved; + u32 mach_data; + u32 macl_data; + u32 mac_access; + u32 mact_indx; + u32 vlan_access; + u32 vlan_tidx; +}; + +struct vsc9953_ana_ana { + u32 adv_learn; + u32 vlan_mask; + u32 anag_efil; + u32 an_events; + u32 storm_limit_burst; + u32 storm_limit_cfg[4]; + u32 isolated_prts; + u32 community_ports; + u32 auto_age; + u32 mac_options; + u32 learn_disc; + u32 agen_ctrl; + u32 mirror_ports; + u32 emirror_ports; + u32 flooding; + u32 flooding_ipmc; + u32 sflow_cfg[11]; + u32 port_mode[12]; +}; + +struct vsc9953_ana_pgid { + u32 port_grp_id[91]; +}; + +struct vsc9953_ana_pfc { + u32 pfc_cfg; + u32 reserved1[15]; +}; + +struct vsc9953_ana_pol_misc { + u32 pol_flowc[10]; + u32 reserved1[17]; + u32 pol_hyst; +}; + +struct vsc9953_ana_common { + u32 aggr_cfg; + u32 cpuq_cfg; + u32 cpuq_8021_cfg; + u32 dscp_cfg; + u32 dscp_rewr_cfg; + u32 vcap_rng_type_cfg; + u32 vcap_rng_val_cfg; + u32 discard_cfg; + u32 fid_cfg; +}; + +struct vsc9953_analyzer { + struct vsc9953_ana_port port[11]; + u32 reserved1[9536]; + struct vsc9953_ana_pol pol[164]; + struct vsc9953_ana_ana_tables ana_tables; + u32 reserved2[14]; + struct vsc9953_ana_ana ana; + u32 reserved3[22]; + struct vsc9953_ana_pgid port_id_tbl; + u32 reserved4[549]; + struct vsc9953_ana_pfc pfc[10]; + struct vsc9953_ana_pol_misc pol_misc; + u32 reserved5[196]; + struct vsc9953_ana_common common; +}; +/* END VSC9953 ANA structure for T1040 U-boot*/ + +/* VSC9953 DEV_GMII structure for T1040 U-boot*/ + +struct vsc9953_dev_gmii_port_mode { + u32 clock_cfg; + u32 port_misc; + u32 reserved1; + u32 eee_cfg; +}; + +struct vsc9953_dev_gmii_mac_cfg_status { + u32 mac_ena_cfg; + u32 mac_mode_cfg; + u32 mac_maxlen_cfg; + u32 mac_tags_cfg; + u32 mac_adv_chk_cfg; + u32 mac_ifg_cfg; + u32 mac_hdx_cfg; + u32 mac_fc_mac_low_cfg; + u32 mac_fc_mac_high_cfg; + u32 mac_sticky; +}; + +struct vsc9953_dev_gmii { + struct vsc9953_dev_gmii_port_mode port_mode; + struct vsc9953_dev_gmii_mac_cfg_status mac_cfg_status; +}; + +/* END VSC9953 DEV_GMII structure for T1040 U-boot*/ + +/* VSC9953 QSYS structure for T1040 U-boot*/ + +struct vsc9953_qsys_hsch { + u32 cir_cfg; + u32 reserved1; + u32 se_cfg; + u32 se_dwrr_cfg[8]; + u32 cir_state; + u32 reserved2[20]; +}; + +struct vsc9953_qsys_sys { + u32 port_mode[12]; + u32 switch_port_mode[11]; + u32 stat_cnt_cfg; + u32 eee_cfg[10]; + u32 eee_thrs; + u32 igr_no_sharing; + u32 egr_no_sharing; + u32 sw_status[11]; + u32 ext_cpu_cfg; + u32 cpu_group_map; + u32 reserved1[23]; +}; + +struct vsc9953_qsys_qos_cfg { + u32 red_profile[16]; + u32 res_qos_mode; +}; + +struct vsc9953_qsys_drop_cfg { + u32 egr_drop_mode; +}; + +struct vsc9953_qsys_mmgt { + u32 eq_cntrl; + u32 reserved1; +}; + +struct vsc9953_qsys_hsch_misc { + u32 hsch_misc_cfg; + u32 reserved1[546]; +}; + +struct vsc9953_qsys_res_ctrl { + u32 res_cfg; + u32 res_stat; + +}; + +struct vsc9953_qsys_reg { + struct vsc9953_qsys_hsch hsch[108]; + struct vsc9953_qsys_sys sys; + struct vsc9953_qsys_qos_cfg qos_cfg; + struct vsc9953_qsys_drop_cfg drop_cfg; + struct vsc9953_qsys_mmgt mmgt; + struct vsc9953_qsys_hsch_misc hsch_misc; + struct vsc9953_qsys_res_ctrl res_ctrl[1024]; +}; + +/* END VSC9953 QSYS structure for T1040 U-boot*/ + +/* VSC9953 SYS structure for T1040 U-boot*/ + +struct vsc9953_sys_stat { + u32 rx_cntrs[64]; + u32 tx_cntrs[64]; + u32 drop_cntrs[64]; + u32 reserved1[6]; +}; + +struct vsc9953_sys_sys { + u32 reset_cfg; + u32 reserved1; + u32 vlan_etype_cfg; + u32 port_mode[12]; + u32 front_port_mode[10]; + u32 frame_aging; + u32 stat_cfg; + u32 reserved2[50]; +}; + +struct vsc9953_sys_pause_cfg { + u32 pause_cfg[11]; + u32 pause_tot_cfg; + u32 tail_drop_level[11]; + u32 tot_tail_drop_lvl; + u32 mac_fc_cfg[10]; +}; + +struct vsc9953_sys_mmgt { + u16 free_cnt; +}; + +struct vsc9953_system_reg { + struct vsc9953_sys_stat stat; + struct vsc9953_sys_sys sys; + struct vsc9953_sys_pause_cfg pause_cfg; + struct vsc9953_sys_mmgt mmgt; +}; + +/* END VSC9953 SYS structure for T1040 U-boot*/ + + +/* VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ + +struct vsc9953_chip_regs { + u32 chipd_id; + u32 gpr; + u32 soft_rst; +}; + +struct vsc9953_gpio { + u32 gpio_out_set[10]; + u32 gpio_out_clr[10]; + u32 gpio_out[10]; + u32 gpio_in[10]; +}; + +struct vsc9953_mii_mng { + u32 miimstatus; + u32 reserved1; + u32 miimcmd; + u32 miimdata; + u32 miimcfg; + u32 miimscan_0; + u32 miimscan_1; + u32 miiscan_lst_rslts; + u32 miiscan_lst_rslts_valid; +}; + +struct vsc9953_mii_read_scan { + u32 mii_scan_results_sticky[2]; +}; + +struct vsc9953_devcpu_gcb { + struct vsc9953_chip_regs chip_regs; + struct vsc9953_gpio gpio; + struct vsc9953_mii_mng mii_mng[2]; + struct vsc9953_mii_read_scan mii_read_scan; +}; + +/* END VSC9953 DEVCPU_GCB structure for T1040 U-boot*/ + +/* VSC9953 IS* structure for T1040 U-boot*/ + +struct vsc9953_vcap_core_cfg { + u32 vcap_update_ctrl; + u32 vcap_mv_cfg; +}; + +struct vsc9953_vcap { +struct vsc9953_vcap_core_cfg vcap_core_cfg; +}; + +/* END VSC9953 IS* structure for T1040 U-boot*/ + +#define VSC9953_PORT_INFO_INITIALIZER(idx) \ +{ \ + .enabled = 0, \ + .phyaddr = 0, \ + .index = idx, \ + .phy_regs = NULL, \ + .enet_if = PHY_INTERFACE_MODE_NONE, \ + .bus = NULL, \ + .phydev = NULL, \ +} + +/* Structure to describe a VSC9953 port */ +struct vsc9953_port_info { + u8 enabled; + u8 phyaddr; + int index; + void *phy_regs; + phy_interface_t enet_if; + struct mii_dev *bus; + struct phy_device *phydev; +}; + +/* Structure to describe a VSC9953 switch */ +struct vsc9953_info { + struct vsc9953_port_info port[VSC9953_MAX_PORTS]; +}; + +void vsc9953_init(bd_t *bis); + +void vsc9953_port_info_set_mdio(int port, struct mii_dev *bus); +void vsc9953_port_info_set_phy_address(int port, int address); +void vsc9953_port_enable(int port); +void vsc9953_port_disable(int port); +void vsc9953_port_info_set_phy_int(int port, phy_interface_t phy_int); + +#endif /* _VSC9953_H_ */ diff --git a/include/zynqpl.h b/include/zynqpl.h index 8a9ec32..1d37a51 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -12,12 +12,18 @@ #include <xilinx.h> +#if defined(CONFIG_FPGA_ZYNQPL) extern struct xilinx_fpga_op zynq_op; +# define FPGA_ZYNQPL_OPS &zynq_op +#else +# define FPGA_ZYNQPL_OPS NULL +#endif #define XILINX_ZYNQ_7010 0x2 #define XILINX_ZYNQ_7015 0x1b #define XILINX_ZYNQ_7020 0x7 #define XILINX_ZYNQ_7030 0xc +#define XILINX_ZYNQ_7035 0x12 #define XILINX_ZYNQ_7045 0x11 #define XILINX_ZYNQ_7100 0x16 @@ -26,26 +32,37 @@ extern struct xilinx_fpga_op zynq_op; #define XILINX_XC7Z015_SIZE 28085344/8 #define XILINX_XC7Z020_SIZE 32364512/8 #define XILINX_XC7Z030_SIZE 47839328/8 +#define XILINX_XC7Z035_SIZE 106571232/8 #define XILINX_XC7Z045_SIZE 106571232/8 #define XILINX_XC7Z100_SIZE 139330784/8 /* Descriptor Macros */ #define XILINX_XC7Z010_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, &zynq_op, "7z010" } +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z010" } #define XILINX_XC7Z015_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, &zynq_op, "7z015" } +{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z015" } #define XILINX_XC7Z020_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, &zynq_op, "7z020" } +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z020" } #define XILINX_XC7Z030_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, &zynq_op, "7z030" } +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z030" } + +#define XILINX_XC7Z035_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z035_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z035" } #define XILINX_XC7Z045_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, &zynq_op, "7z045" } +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z045" } #define XILINX_XC7Z100_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, &zynq_op, "7z100" } +{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, FPGA_ZYNQPL_OPS, \ + "7z100" } #endif /* _ZYNQPL_H_ */ |