summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorMatthias Fuchs <matthias.fuchs@esd.eu>2015-01-12 22:33:38 +0100
committerTom Rini <trini@ti.com>2015-01-13 09:37:21 -0500
commitcbdc662a2c7ef75071d4e892bd5ea0b65098c5d1 (patch)
tree59015e0601decbe424b16555c10f08d441aa3c54 /include
parent92fa7f53f1f3f03296f8ffb14bdf1baefab83368 (diff)
downloadu-boot-imx-cbdc662a2c7ef75071d4e892bd5ea0b65098c5d1.zip
u-boot-imx-cbdc662a2c7ef75071d4e892bd5ea0b65098c5d1.tar.gz
u-boot-imx-cbdc662a2c7ef75071d4e892bd5ea0b65098c5d1.tar.bz2
m68k: remove TASREG board
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include')
-rw-r--r--include/configs/TASREG.h287
1 files changed, 0 insertions, 287 deletions
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
deleted file mode 100644
index 5ad9383..0000000
--- a/include/configs/TASREG.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Configuation settings for the esd TASREG board.
- *
- * (C) Copyright 2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _TASREG_H
-#define _TASREG_H
-
-#ifndef __ASSEMBLY__
-#include <asm/m5249.h>
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MCF52x2 /* define processor family */
-#define CONFIG_M5249 /* define processor type */
-
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 19200
-
-#undef CONFIG_WATCHDOG
-
-#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#undef CONFIG_CMD_NET
-
-
-#define CONFIG_BOOTDELAY 3
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
-#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
-#define CONFIG_LOOPW 1 /* enable loopw command */
-#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
-
-#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x400
-#define CONFIG_SYS_MEMTEST_END 0x380000
-
-/*
- * Clock configuration: enable only one of the following options
- */
-
-#if 0 /* this setting will run the cpu at 11MHz */
-#define CONFIG_SYS_PLL_BYPASS 1 /* bypass PLL for test purpose */
-#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */
-#define CONFIG_SYS_CLK 11289600 /* PLL bypass */
-#endif
-
-#if 0 /* this setting will run the cpu at 70MHz */
-#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
-#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */
-#define CONFIG_SYS_CLK 72185018 /* The next lower speed */
-#endif
-
-#if 1 /* this setting will run the cpu at 140MHz */
-#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
-#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */
-#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */
-#endif
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
-#define CONFIG_SYS_MBAR2 0x80000000
-
-/*-----------------------------------------------------------------------
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED 100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-
-#if 0 /* push-pull */
-#define SDA 0x00800000
-#define SCL 0x00000008
-#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
-#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
-#define I2C_INIT {OUT1|=SDA;OUT0|=SCL;}
-#define I2C_READ ((IN1&SDA)?1:0)
-#define I2C_SDA(x) {if(x)OUT1|=SDA;else OUT1&=~SDA;}
-#define I2C_SCL(x) {if(x)OUT0|=SCL;else OUT0&=~SCL;}
-#define I2C_DELAY {udelay(5);}
-#define I2C_ACTIVE {DIR1|=SDA;}
-#define I2C_TRISTATE {DIR1&=~SDA;}
-#else /* open-collector */
-#define SDA 0x00800000
-#define SCL 0x00000008
-#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
-#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
-#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
-#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
-#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
-#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
-#define I2C_INIT {DIR1&=~SDA;DIR0&=~SCL;OUT1&=~SDA;OUT0&=~SCL;}
-#define I2C_READ ((IN1&SDA)?1:0)
-#define I2C_SDA(x) {if(x)DIR1&=~SDA;else DIR1|=SDA;}
-#define I2C_SCL(x) {if(x)DIR0&=~SCL;else DIR0|=SCL;}
-#define I2C_DELAY {udelay(5);}
-#define I2C_ACTIVE {DIR1|=SDA;}
-#define I2C_TRISTATE {DIR1&=~SDA;}
-#endif
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
-/*
- * The Catalyst CAT24WC32 has 32 byte page write mode using
- * last 5 bits of the address
- */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0xFFC40000 /* Address of Environment Sector*/
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-
-#if 0 /* test-only */
-#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-
-#define CONFIG_SYS_MONITOR_LEN 0x20000
-#define CONFIG_SYS_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */
-#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM)
-#define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
- CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \
- CF_CACR_DBWE)
-
-/*-----------------------------------------------------------------------
- * Memory bank definitions
- */
-
-/* CS0 - AMD Flash, address 0xffc00000 */
-#define CONFIG_SYS_CS0_BASE 0xffc00000
-#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */
-/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */
-
-/* CS1 - FPGA, address 0xe0000000 */
-#define CONFIG_SYS_CS1_BASE 0xe0000000
-#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */
-#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/
-
-/*-----------------------------------------------------------------------
- * Port configuration
- */
-#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
-#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/
-#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
-#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
-#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
-#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
-
-#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */
-
-/*-----------------------------------------------------------------------
- * FPGA stuff
- */
-#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
-#define CONFIG_SYS_FPGA_MAX_SIZE 512*1024 /* 512kByte is enough for XC2S200*/
-
-/* FPGA program pin configuration */
-#define CONFIG_SYS_FPGA_PRG 0x00010000 /* FPGA program pin (ppc output) */
-#define CONFIG_SYS_FPGA_CLK 0x00040000 /* FPGA clk pin (ppc output) */
-#define CONFIG_SYS_FPGA_DATA 0x00020000 /* FPGA data pin (ppc output) */
-#define CONFIG_SYS_FPGA_INIT 0x00080000 /* FPGA init pin (ppc input) */
-#define CONFIG_SYS_FPGA_DONE 0x00100000 /* FPGA done pin (ppc input) */
-
-#endif /* _TASREG_H */