summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorwdenk <wdenk>2005-01-09 23:33:49 +0000
committerwdenk <wdenk>2005-01-09 23:33:49 +0000
commit6225c5db6cb5a727cbf795678b857b3b66ba0911 (patch)
treee3ce1a368cde856155fc52c37e1c6507e25ea977 /include
parent8ed9604613398660f9ee855060661da8809d4045 (diff)
downloadu-boot-imx-6225c5db6cb5a727cbf795678b857b3b66ba0911.zip
u-boot-imx-6225c5db6cb5a727cbf795678b857b3b66ba0911.tar.gz
u-boot-imx-6225c5db6cb5a727cbf795678b857b3b66ba0911.tar.bz2
* Patch by Sam Song, 11 October 2004:
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board - Adjust CPU:BUS frequency ratio 1:1 when core frequency less than 50MHz * Patch by Sam Song, 10 Oct 2004: Fix a parameter error in run_command() in main.c
Diffstat (limited to 'include')
-rw-r--r--include/configs/RPXlite_DW.h54
1 files changed, 47 insertions, 7 deletions
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index d0e427d..6f23931 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -45,6 +45,7 @@
*/
/* #define DEBUG 1 */
+/* #ifdef DEPLOYMENT 1 */
#undef CONFIG_MPC860
#define CONFIG_MPC823 1 /* This is a MPC823e CPU. */
@@ -59,19 +60,31 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */
-#ifdef CONFIG_LCD
-#define CONFIG_BOOTDELAY 12 /* autoboot after 12 seconds */
+#ifdef DEBUG
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */
+
+#ifdef DEPLOYMENT
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR "st"
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_RESET_TO_RETRY 1
+#define CONFIG_BOOT_RETRY_MIN 1
#endif
+#endif
+
+/* pre-boot commands */
+#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "nfsargs=setenv bootargs console=ttyS0,9600 root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
- "ramargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
- "root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs console=tty0 console=ttyS0,9600 " \
+ "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs console=tty0 root=/dev/ram rw\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
@@ -82,9 +95,25 @@
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"gatewayip=172.16.115.254\0" \
"netmask=255.255.255.0\0" \
+<<<<<<< RPXlite_DW.h
+ "kernel_addr=ff040000\0" \
+ "ramdisk_addr=ff200000\0" \
+ "ku=era $(kernel_addr) ff1fffff;cp.b 100000 $(kernel_addr) " \
+ "$(filesize);md $(kernel_addr);" \
+ "echo kernel updating finished\0" \
+ "uu=protect off 1:0-4;era 1:0-4;cp.b 100000 ff000000 " \
+ "$(filesize);md ff000000;" \
+ "echo u-boot updating finished\0" \
+ "eu=protect off 1:6;era 1:6;reset\0" \
+ "lcd=setenv stdout lcd;setenv stdin lcd\0" \
+ "ser=setenv stdout serial;setenv stdin serial\0" \
+ "verify=no"
+
+=======
"kernel_addr=ff080000\0" \
"ramdisk_addr=ff200000\0" \
""
+>>>>>>> 1.3
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -178,8 +207,13 @@
#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
#endif
+<<<<<<< RPXlite_DW.h
+#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
+=======
#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+>>>>>>> 1.3
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -254,10 +288,16 @@
/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
#if defined(RPXlite_64MHz)
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
+<<<<<<< RPXlite_DW.h
+#else
+#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
+#endif
+=======
#else
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
#endif
+>>>>>>> 1.3
/*-----------------------------------------------------------------------
* PCMCIA stuff
*-----------------------------------------------------------------------