ppc: Zap Hymod board

Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.

This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>

3 files changed, 0 insertions, 734 deletions

diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 62cb1ea..aef39d7 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -79,9 +79,6 @@ typedef struct bd_info {
 	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
 	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
 #endif
-#if defined(CONFIG_HYMOD)
-	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
-#endif
 
 #ifdef CONFIG_HAS_ETH1
 	unsigned char   bi_enet1addr[6];	/* OLD: see README.enetaddr */
diff --git a/include/common.h b/include/common.h
index bcf6c7e..a5764d8 100644
--- a/include/common.h
+++ b/include/common.h
@@ -69,9 +69,6 @@ typedef volatile unsigned char	vu_char;
 #ifdef	CONFIG_4xx
 #include <asm/ppc4xx.h>
 #endif
-#ifdef CONFIG_HYMOD
-#include <board/hymod/hymod.h>
-#endif
 #ifdef CONFIG_ARM
 #define asmlinkage	/* nothing */
 #endif
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
deleted file mode 100644
index c973365..0000000
--- a/include/configs/hymod.h
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Config header file for Hymod board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_HYMOD		1	/* ...on a Hymod board		*/
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
-
-#define CONFIG_BOARD_POSTCLK_INIT	/* have board_postclk_init() function */
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
-#define	CONFIG_CONS_ON_SCC		/* define if console on SCC */
-#undef	CONFIG_CONS_NONE		/* define if console on something else*/
-#define	CONFIG_CONS_INDEX	1	/* which serial channel for console */
-#define	CONFIG_CONS_USE_EXTC		/* SMC/SCC use ext clock not brg_clk */
-#define	CONFIG_CONS_EXTC_RATE	3686400	/* SMC/SCC ext clk rate in Hz */
-#define	CONFIG_CONS_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC	*/
-#define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC	*/
-#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-#define CONFIG_ETHER_INDEX	1	/* which channel for ether	*/
-#define CONFIG_ETHER_LOOPBACK_TEST	/* add ether external loopback test */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#if (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK10
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT		0		/* Port A */
-# define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE		MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK	0x00040000	/* Pin 13 */
-# define MDIO_CLCK_PINMASK	0x00080000	/* Pin 12 */
-
-#elif (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT		0		/* Port A */
-# define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE		MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK	0x00000040	/* Pin 25 */
-# define MDIO_CLCK_PINMASK	0x00000080	/* Pin 24 */
-
-#elif (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT		0		/* Port A */
-# define MDIO_DECLARE		volatile ioport_t *iop = ioport_addr ( \
-					(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE		MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK	0x00000100	/* Pin 23 */
-# define MDIO_CLCK_PINMASK	0x00000200	/* Pin 22 */
-
-#endif	/* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII			/* MII PHY management	*/
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-
-#define MDIO_ACTIVE	(iop->pdir |=  MDIO_DATA_PINMASK)
-#define MDIO_TRISTATE	(iop->pdir &= ~MDIO_DATA_PINMASK)
-#define MDIO_READ	((iop->pdat &  MDIO_DATA_PINMASK) != 0)
-
-#define MDIO(bit)	if(bit) iop->pdat |=  MDIO_DATA_PINMASK; \
-			else	iop->pdat &= ~MDIO_DATA_PINMASK
-
-#define MDC(bit)	if(bit) iop->pdat |=  MDIO_CLCK_PINMASK; \
-			else	iop->pdat &= ~MDIO_CLCK_PINMASK
-
-#define MIIDELAY	udelay(1)
-
-#endif	/* CONFIG_ETHER_ON_FCC */
-
-
-/* other options */
-#define CONFIG_HARD_I2C		1	/* To enable I2C hardware support	*/
-#define CONFIG_DTT_ADM1021	1	/* ADM1021 temp sensor support */
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifdef DEBUG
-#define CONFIG_8260_CLKIN	33333333	/* in Hz */
-#else
-#define CONFIG_8260_CLKIN	66666666	/* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE		115200
-#else
-#define CONFIG_BAUDRATE		9600
-#endif
-
-/* default ip addresses - these will be overridden */
-#define CONFIG_IPADDR		192.168.1.1	/* hymod "boot" address */
-#define CONFIG_SERVERIP		192.168.1.254	/* hymod "server" address */
-
-#define CONFIG_LAST_STAGE_INIT
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_XIMG
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#define CONFIG_BOOT_RETRY_TIME 30	/* retry autoboot after 30 secs	*/
-#define CONFIG_BOOT_RETRY_MIN	1	/* can go down to 1 second timeout */
-/* Be selective on what keys can delay or stop the autoboot process
- *	To stop use: " "
- */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		"Autobooting in %d seconds, " \
-					"press <SPACE> to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR	" "
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define DEBUG_BOOTKEYS		0
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define	CONFIG_KGDB_USE_EXTC		/* SMC/SCC use ext clock not brg_clk */
-#define	CONFIG_KGDB_EXTC_RATE	3686400	/* serial ext clk rate in Hz */
-#define	CONFIG_KGDB_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-# if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-# else
-#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
-# endif
-#endif
-
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
-#define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
-
-/*
- * Hymod specific configurable options
- */
-#undef	CONFIG_SYS_HYMOD_DBLEDS			/* walk mezz board LEDs */
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x03c00000	/* 4 ... 60 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define	CONFIG_SYS_I2C_SPEED		50000
-#define	CONFIG_SYS_I2C_SLAVE		0x7e
-
-/* these are for the ST M24C02 2kbit serial i2c eeprom */
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4	/* 16 byte write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-
-#define CONFIG_SYS_I2C_MULTI_EEPROMS	1		/* hymod has two eeproms */
-
-#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* philips PCF8563 RTC address */
-
-/*
- * standard dtt sensor configuration - bottom bit will determine local or
- * remote sensor of the ADM1021, the rest determines index into
- * CONFIG_SYS_DTT_ADM1021 array below.
- *
- * On HYMOD board, the remote sensor should be connected to the MPC8260
- * temperature diode thingy, but an errata said this didn't work and
- * should be disabled - so it isn't connected.
- */
-#if 0
-#define CONFIG_DTT_SENSORS		{ 0, 1 }
-#else
-#define CONFIG_DTT_SENSORS		{ 0 }
-#endif
-
-/*
- * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
- * there will be one entry in this array for each two (dummy) sensors in
- * CONFIG_DTT_SENSORS.
- *
- * For HYMOD board:
- * - only one ADM1021
- * - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
- * - conversion rate 0x02 = 0.25 conversions/second
- * - ALERT ouput disabled
- * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
- * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
- */
-#define CONFIG_SYS_DTT_ADM1021		{ { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#ifdef DEBUG
-#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
-			 HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
-			 HRCW_MODCK_H0010)
-#else
-#define CONFIG_SYS_HRCW_MASTER	(HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
-			 HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
-			 HRCW_MODCK_H0101)
-#endif
-/* no slaves so just duplicate the master hrcw */
-#define CONFIG_SYS_HRCW_SLAVE1	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE2	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE3	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE4	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE5	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE6	CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE7	CONFIG_SYS_HRCW_MASTER
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x4000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_FPGA_BASE		0x80000000
-/*
- * unfortunately, CONFIG_SYS_MONITOR_LEN must include the
- * (very large i.e. 256kB) environment flash sector
- */
-#define	CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor*/
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max num of sects on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
-#define	CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
-#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value*/
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers			 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT	(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
-				HID0_IFEM|HID0_ABE)
-#ifdef DEBUG
-#define CONFIG_SYS_HID0_FINAL	0
-#else
-#define CONFIG_SYS_HID0_FINAL	(HID0_ICE|HID0_IFEM|HID0_ABE)
-#endif
-#define CONFIG_SYS_HID2	0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register					 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#ifdef DEBUG
-#define CONFIG_SYS_RMR		0
-#else
-#define CONFIG_SYS_RMR		RMR_CSRE
-#endif
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration					 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR		(BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DPPC10|SIUMCR_L2CPC01|\
-			 SIUMCR_APPC10|SIUMCR_MMR11)
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control			 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC	(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control					 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR	(SCCR_DFBRG01)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration				13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR	0
-
-/*
- * Init Memory Controller:
- *
- * Bank	Bus	Machine	PortSz	Device
- * ----	---	-------	------	------
- *  0	60x	GPCM	32 bit	FLASH
- *  1	60x	GPCM	32 bit	FLASH (same as 0 - unused for now)
- *  2	60x	SDRAM	64 bit	SDRAM
- *  3	Local	UPMC	 8 bit	Main Xilinx configuration
- *  4	Local	GPCM	32 bit	Main Xilinx register mode
- *  5	Local	UPMB	32 bit	Main Xilinx port mode
- *  6	Local	UPMC	 8 bit	Mezz Xilinx configuration
- */
-
-/*
- * Bank 0 - FLASH
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The flash memory is two Intel StrataFlash chips, each configured for
- *  16 bit operation and connected to give a 32 bit wide port."
- *
- * "The chip select logic is configured to respond to both *CS0 and *CS1.
- *  Therefore the FLASH memory will be mapped to both bank 0 and bank 1.
- *  It is suggested that bank 0 be read-only and bank 1 be read/write. The
- *  FLASH will then appear as ROM during boot."
- *
- * Initially, we are only going to use bank 0 in read/write mode.
- */
-
-/* 32 bit, read-write, GPCM on 60x bus */
-#define	CONFIG_SYS_BR0_PRELIM	((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\
-				BRx_PS_32|BRx_MS_GPCM_P|BRx_V)
-/* up to 32 Mb */
-#define	CONFIG_SYS_OR0_PRELIM	(MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
-
-/*
- * Bank 2 - SDRAM
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a
- *  fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous
- *  dynamic random access memory organised as 4 banks by 4096 rows by 512
- *  columns by 16 bits. Four chips provide a 64-bit port on the 60x bus."
- *
- * "The locations in SDRAM are accessed using multiplexed address pins to
- *  specify row and column. The pins also act to specify commands. The state
- *  of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP
- *  pin may function as a row address or as the AUTO PRECHARGE control line,
- *  depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260
- *  address lines to be configured to the required multiplexing scheme."
- */
-
-#define CONFIG_SYS_SDRAM_SIZE	64
-
-/* 64 bit, read-write, SDRAM on 60x bus */
-#define	CONFIG_SYS_BR2_PRELIM	((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\
-				BRx_PS_64|BRx_MS_SDRAM_P|BRx_V)
-/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */
-#define	CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\
-				ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12)
-
-/*
- * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows:
- *
- * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5
- * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16
- * as bank select, A7 is output on SDA10 during an ACTIVATE command,
- * earliest timing for ACTIVATE command after REFRESH command is 6 clocks,
- * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE
- * command is 2 clocks, earliest timing for PRECHARGE after last data
- * was read is 1 clock, earliest timing for PRECHARGE after last data
- * was written is 1 clock, CAS Latency is 2.
- */
-
-#define CONFIG_SYS_PSDMR	(PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
-				PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\
-				PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\
-				PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\
-				PSDMR_WRC_1C|PSDMR_CL_2)
-
-/*
- * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh
- * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register
- * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer
- * Prescaler, hence the P instead of the R). The refresh timer period is given
- * by (note that there was a change in the 8260 UM Errata):
- *
- *	TimerPeriod = (PSRT + 1) / Fmptc
- *
- * where Fmptc is the BusClock divided by PTP. i.e.
- *
- *	TimerPeriod = (PSRT + 1) / (BusClock / PTP)
- *
- * or
- *
- *	TImerPeriod = (PTP * (PSRT + 1)) / BusClock
- *
- * The requirement for the Toshiba TC59SM716FTL-10 is that there must be
- * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096
- * = 15.625 usecs.
- *
- * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32
- * appear to be reasonable.
- */
-
-#ifdef DEBUG
-#define CONFIG_SYS_PSRT	39
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV8
-#else
-#define CONFIG_SYS_PSRT	31
-#define CONFIG_SYS_MPTPR	MPTPR_PTP_DIV32
-#endif
-
-/*
- * Banks 3,4,5 and 6 - FPGA access
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made
- *  for configuring an optional FPGA on the mezzanine interface.
- *
- *  Access to the FPGAs may be divided into several catagories:
- *
- *  1. Configuration
- *  2. Register mode access
- *  3. Port mode access
- *
- *  The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be
- *  configured only (mode 1). Consequently there are four access types.
- *
- *  To improve interface performance and simplify software design, the four
- *  possible access types are separately mapped to different memory banks.
- *
- *  All are accessed using the local bus."
- *
- *	 Device		    Mode      Memory Bank Machine Port Size    Access
- *
- *	  Main		Configuration	   3	   UPMC	     8bit	R/W
- *	  Main		  Register	   4	   GPCM	    32bit	R/W
- *	  Main		    Port	   5	   UPMB	    32bit	R/W
- *	Mezzanine	Configuration	   6	   UPMC	     8bit	W/O
- *
- * "Note that mezzanine mode 1 access is write-only."
- */
-
-/* all the bank sizes must be a power of two, greater or equal to 32768 */
-#define FPGA_MAIN_CFG_BASE	(CONFIG_SYS_FPGA_BASE)
-#define FPGA_MAIN_CFG_SIZE	32768
-#define FPGA_MAIN_REG_BASE	(FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE)
-#define FPGA_MAIN_REG_SIZE	32768
-#define FPGA_MAIN_PORT_BASE	(FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE)
-#define FPGA_MAIN_PORT_SIZE	32768
-#define FPGA_MEZZ_CFG_BASE	(FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE)
-#define FPGA_MEZZ_CFG_SIZE	32768
-
-/* 8 bit, read-write, UPMC */
-#define	CONFIG_SYS_BR3_PRELIM	(FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define	CONFIG_SYS_OR3_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
-
-/* 32 bit, read-write, GPCM */
-#define	CONFIG_SYS_BR4_PRELIM	(FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
-/* up to 32Kbyte */
-#define	CONFIG_SYS_OR4_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
-
-/* 32 bit, read-write, UPMB */
-#define	CONFIG_SYS_BR5_PRELIM	(FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
-/* up to 32Kbyte */
-#define	CONFIG_SYS_OR5_PRELIM	(P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
-
-/* 8 bit, write-only, UPMC */
-#define	CONFIG_SYS_BR6_PRELIM	(FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define	CONFIG_SYS_OR6_PRELIM	(P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
-
-/*-----------------------------------------------------------------------
- * MBMR - Machine B Mode					10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MBMR	(MxMR_BSEL|MxMR_OP_NORM)	/* XXX - needs more */
-
-/*-----------------------------------------------------------------------
- * MCMR - Machine C Mode					10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MCMR	(MxMR_BSEL|MxMR_DSx_2_CYCL)	/* XXX - needs more */
-
-/*
- * FPGA I/O Port/Bit information
- */
-
-#define FPGA_MAIN_PROG_PORT	IOPIN_PORTA
-#define FPGA_MAIN_PROG_PIN	4	/* PA4 */
-#define FPGA_MAIN_INIT_PORT	IOPIN_PORTA
-#define FPGA_MAIN_INIT_PIN	5	/* PA5 */
-#define FPGA_MAIN_DONE_PORT	IOPIN_PORTA
-#define FPGA_MAIN_DONE_PIN	6	/* PA6 */
-
-#define FPGA_MEZZ_PROG_PORT	IOPIN_PORTA
-#define FPGA_MEZZ_PROG_PIN	0	/* PA0 */
-#define FPGA_MEZZ_INIT_PORT	IOPIN_PORTA
-#define FPGA_MEZZ_INIT_PIN	1	/* PA1 */
-#define FPGA_MEZZ_DONE_PORT	IOPIN_PORTA
-#define FPGA_MEZZ_DONE_PIN	2	/* PA2 */
-#define FPGA_MEZZ_ENABLE_PORT	IOPIN_PORTA
-#define FPGA_MEZZ_ENABLE_PIN	3	/* PA3 */
-
-/*
- * FPGA Interrupt configuration
- */
-#define FPGA_MAIN_IRQ		SIU_INT_IRQ2
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */