Merge branch 'master' of git://git.denx.de/u-boot-tegra

5 files changed, 82 insertions, 10 deletions

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 60539d8..1ebb9c7 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -26,8 +26,8 @@
  */
 
 /**
- * Request a gpio. This should be called before any of the other functions
- * are used on this gpio.
+ * Request a GPIO. This should be called before any of the other functions
+ * are used on this GPIO.
  *
  * @param gp	GPIO number
  * @param label	User label for this GPIO
@@ -102,7 +102,7 @@ struct udevice;
  * new DM GPIO API, this should be really easy to flip over to the Linux
  * GPIO API-alike interface.
  *
- * Akso it would be useful to standardise additional functions like
+ * Also it would be useful to standardise additional functions like
  * pullup, slew rate and drive strength.
  *
  * gpio_request)( and gpio_free() are optional - if NULL then they will
@@ -115,7 +115,7 @@ struct udevice;
  * SoCs there may be many banks and therefore many devices all referring
  * to the different IO addresses within the SoC.
  *
- * The uclass combines all GPIO devices togther to provide a consistent
+ * The uclass combines all GPIO devices together to provide a consistent
  * numbering from 0 to n-1, where n is the number of GPIOs in total across
  * all devices. Be careful not to confuse offset with gpio in the parameters.
  */
@@ -143,7 +143,7 @@ struct dm_gpio_ops {
  * struct gpio_dev_priv - information about a device used by the uclass
  *
  * The uclass combines all active GPIO devices into a unified numbering
- * scheme. To do this it maintains some private information aobut each
+ * scheme. To do this it maintains some private information about each
  * device.
  *
  * To implement driver model support in your GPIO driver, add a probe
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
new file mode 100644
index 0000000..3cde923
--- /dev/null
+++ b/include/configs/apalis_t30.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2014 Marcel Ziswiler
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+
+/* High-level configuration options */
+#define V_PROMPT			"Apalis T30 # "
+#define CONFIG_TEGRA_BOARD_STRING	"Toradex Apalis T30"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_APALIS_T30
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		2
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* PCI host support */
+#undef CONFIG_PCI	/* just define once Tegra PCIe support got merged */
+#define CONFIG_PCI_TEGRA
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+
+/* PCI networking support */
+#define CONFIG_E1000
+#undef CONFIG_E1000_NO_NVM	/* just define once E1000 driver got fixed */
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index 782b9d1..a582e25 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -11,7 +11,6 @@
 
 #include "tegra30-common.h"
 
-
 #define V_PROMPT			"Colibri T30 # "
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T30"
 
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index a258699..c3ad8be 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -67,10 +67,6 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-/* remove devicetree support */
-#ifdef CONFIG_OF_CONTROL
-#endif
-
 /* remove I2C support */
 #ifdef CONFIG_SYS_I2C_TEGRA
 #undef CONFIG_SYS_I2C_TEGRA
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 981a8d2..5d2b12a 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -118,6 +118,8 @@
 #define CONFIG_SYS_MEMTEST_START	(NV_PA_SDRC_CS0 + 0x600000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
 
+#define CONFIG_USE_ARCH_MEMCPY
+
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */