usb: use linux/usb/ch9.h instead of usbdescriptors.h

Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequense of this change USB_SPEED_* values don't correspond
directly to EHCI speed encoding anymore, I've added necessary
recoding in EHCI driver. Also there is no point to put speed into
pipe anymore so it's removed and a bunch of host drivers fixed to
look at usb_device->speed instead.

Old usbdescriptors.h included is not removed as it seems to be
used by old USB device code.

This makes usb.h and usbdevice.h incompatible. Fortunately the
only place that tries to include both are the old MUSB code and
it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute
on musb_regs structure but this attribute seems to be unneeded
(old MUSB code doesn't support any DMA at all).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>

2 files changed, 3 insertions, 18 deletions

diff --git a/include/usb.h b/include/usb.h
index 9dd8791..4689db6 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -27,7 +27,7 @@
 #define _USB_H_
 
 #include <usb_defs.h>
-#include <usbdescriptors.h>
+#include <linux/usb/ch9.h>
 
 /*
  * The EHCI spec says that we must align to at least 32 bytes.  However,
@@ -67,12 +67,6 @@ struct devrequest {
 	unsigned short	length;
 } __attribute__ ((packed));
 
-/* All standard descriptors have these 2 fields in common */
-struct usb_descriptor_header {
-	unsigned char	bLength;
-	unsigned char	bDescriptorType;
-} __attribute__ ((packed));
-
 /* Interface */
 struct usb_interface {
 	struct usb_interface_descriptor desc;
@@ -86,7 +80,7 @@ struct usb_interface {
 
 /* Configuration information.. */
 struct usb_config {
-	struct usb_configuration_descriptor desc;
+	struct usb_config_descriptor desc;
 
 	unsigned char	no_of_if;	/* number of interfaces */
 	struct usb_interface if_desc[USB_MAXINTERFACES];
@@ -285,7 +279,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
  *  - device:		bits 8-14
  *  - endpoint:		bits 15-18
  *  - Data0/1:		bit 19
- *  - speed:		bit 26		(0 = Full, 1 = Low Speed, 2 = High)
  *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
  *					 10 = control, 11 = bulk)
  *
@@ -297,7 +290,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 /* Create various pipes... */
 #define create_pipe(dev,endpoint) \
 		(((dev)->devnum << 8) | ((endpoint) << 15) | \
-		((dev)->speed << 26) | (dev)->maxpacketsize)
+		(dev)->maxpacketsize)
 #define default_pipe(dev) ((dev)->speed << 26)
 
 #define usb_sndctrlpipe(dev, endpoint)	((PIPE_CONTROL << 30) | \
@@ -348,8 +341,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 #define usb_pipe_endpdev(pipe)	(((pipe) >> 8) & 0x7ff)
 #define usb_pipeendpoint(pipe)	(((pipe) >> 15) & 0xf)
 #define usb_pipedata(pipe)	(((pipe) >> 19) & 1)
-#define usb_pipespeed(pipe)	(((pipe) >> 26) & 3)
-#define usb_pipeslow(pipe)	(usb_pipespeed(pipe) == USB_SPEED_LOW)
 #define usb_pipetype(pipe)	(((pipe) >> 30) & 3)
 #define usb_pipeisoc(pipe)	(usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
 #define usb_pipeint(pipe)	(usb_pipetype((pipe)) == PIPE_INTERRUPT)
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 8032e57..9502544 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -80,12 +80,6 @@
 #define USB_DIR_OUT           0
 #define USB_DIR_IN            0x80
 
-/* USB device speeds */
-#define USB_SPEED_FULL		0x0	/* 12Mbps */
-#define USB_SPEED_LOW		0x1	/* 1.5Mbps */
-#define USB_SPEED_HIGH		0x2	/* 480Mbps */
-#define USB_SPEED_RESERVED	0x3
-
 /* Descriptor types */
 #define USB_DT_DEVICE        0x01
 #define USB_DT_CONFIG        0x02