Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

11 files changed, 116 insertions, 199 deletions

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index f45deeb..d3c4756 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -34,7 +34,7 @@
 
 /* SPL defines. */
 #define CONFIG_SPL_TEXT_BASE		0x40300350
-#define CONFIG_SPL_MAX_SIZE		(0x40337C00 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_MAX_SIZE		(220 << 10)	/* 220KB */
 #define CONFIG_SPL_YMODEM_SUPPORT
 
 /* Enabling L2 Cache */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f210ed8..04ae3ca 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -4,7 +4,7 @@
  * Lokesh Vutla	  <lokeshvutla@ti.com>
  *
  * Configuration settings for the TI DRA7XX board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -34,7 +34,7 @@
 
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 /* CPSW Ethernet */
 #define CONFIG_CMD_NET			/* 'bootp' and 'tftp' */
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 71062a6..20fbbec 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -10,20 +10,13 @@
 #ifndef __IGEP00X0_H
 #define __IGEP00X0_H
 
-#include <asm/sizes.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
+#ifdef CONFIG_BOOT_NAND
+#define CONFIG_NAND
+#endif
 
-#define CONFIG_SDRC	/* The chip has SDRC controller */
+#define CONFIG_NR_DRAM_BANKS            2
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <configs/ti_omap3_common.h>
 #include <asm/mach-types.h>
 
 /*
@@ -32,47 +25,12 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
 #define CONFIG_REVISION_TAG		1
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_SUPPORT_RAW_INITRD
 
-/*
- * NS16550 Configuration
- */
-
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
 /* define to enable boot progress via leds */
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
@@ -95,21 +53,10 @@
 #define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME	"IGEP"
 
-/* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_CMD_ONENAND	/* ONENAND support		*/
 #endif
-#ifdef CONFIG_BOOT_NAND
-#define CONFIG_CMD_NAND
-#endif
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
@@ -117,24 +64,8 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NFS		/* NFS support			*/
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands	*/
-#define CONFIG_MTD_DEVICE
-
-#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_IMLS		/* List all found images	*/
 
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_OMAP34XX
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-
-#define CONFIG_BOOTDELAY		3
+/*#undef CONFIG_ENV_IS_NOWHERE*/
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"usbtty=cdc_acm\0" \
@@ -205,48 +136,6 @@
 	"fi;" \
 	"run nandboot;" \
 
-#define CONFIG_AUTO_COMPLETE		1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT		"U-Boot # "
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
-								/* works on */
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-
-/*
- * Physical Memory Map
- *
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
 /*
  * FLASH and environment organization
  */
@@ -263,24 +152,16 @@
 #define CONFIG_ENV_ADDR			ONENAND_ENV_OFFSET
 #endif
 
-#ifdef CONFIG_BOOT_NAND
+#ifdef CONFIG_NAND
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M /* Configure the PISMO */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
 #define GPMC_NAND_ECC_LP_x16_LAYOUT	1
 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
 #define CONFIG_ENV_IS_IN_NAND	        1
 #define CONFIG_ENV_SIZE			(512 << 10) /* Total Size Environment */
 #define CONFIG_ENV_ADDR			NAND_ENV_OFFSET
-#define CONFIG_SYS_MAX_NAND_DEVICE      1
 #endif
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-/*
  * SMSC911x Ethernet
  */
 #if defined(CONFIG_CMD_NET)
@@ -289,54 +170,9 @@
 #define CONFIG_SMC911X_BASE	0x2C000000
 #endif /* (CONFIG_CMD_NET) */
 
-/*
- * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
- * and older u-boot.bin with the new U-Boot SPL.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-/* SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_TEXT_BASE		0x40200800
-#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
-#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-
-/* move malloc and bss high to prevent clashing with the main image */
-#define CONFIG_SYS_SPL_MALLOC_START	0x87000000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-#define CONFIG_SPL_BSS_START_ADDR	0x87080000	/* end of minimum RAM */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-
-/* MMC boot config */
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-
+/* OneNAND boot config */
 #ifdef CONFIG_BOOT_ONENAND
 #define CONFIG_SPL_ONENAND_SUPPORT
-
-/* OneNAND boot config */
 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 #define CONFIG_SYS_ONENAND_PAGE_SIZE	2048
 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
@@ -345,13 +181,8 @@
 
 #endif
 
-#ifdef CONFIG_BOOT_NAND
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-
 /* NAND boot config */
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
@@ -363,8 +194,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #endif
 
 #endif /* __IGEP00X0_H */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 73dc088..7378acd 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -4,7 +4,7 @@
  * Steve Sakoman  <steve@sakoman.com>
  *
  * Configuration settings for the TI OMAP4 Panda board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -36,7 +36,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
 #define CONFIG_CMD_NET
 
 /* GPIO */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index b352511..a837974 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -5,7 +5,7 @@
  * Steve Sakoman  <steve@sakoman.com>
  *
  * Configuration settings for the TI SDP4430 board.
- * See omap4_common.h for OMAP4 common part
+ * See ti_omap4_common.h for OMAP4 common part
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -19,7 +19,7 @@
 #define CONFIG_4430SDP		1	/* working with SDP */
 #define CONFIG_MACH_TYPE	MACH_TYPE_OMAP_4430SDP
 
-#include <configs/omap4_common.h>
+#include <configs/ti_omap4_common.h>
 
 /* Battery Charger */
 #ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 76c5106..51dff23 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -4,7 +4,7 @@
  * Sricharan R	  <r.sricharan@ti.com>
  *
  * Configuration settings for the TI EVM5430 board.
- * See omap5_common.h for omap5 common settings.
+ * See ti_omap5_common.h for omap5 common settings.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -17,7 +17,7 @@
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
-#include <configs/omap5_common.h>
+#include <configs/ti_omap5_common.h>
 
 #define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 4364eef..91f97dd 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -73,6 +73,10 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
 /* Now bring in the rest of the common code. */
 #include <configs/ti_armv7_common.h>
 
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 99b60fc..69d69a5 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -45,11 +45,15 @@
 #define CONFIG_BOOTDELAY		1
 
 /*
- * DDR information.  We say (for simplicity) that we have 1 bank,
- * always, even when we have more.  We always start at 0x80000000,
- * and we place the initial stack pointer in our SRAM.
+ * DDR information.  If the CONFIG_NR_DRAM_BANKS is not defined,
+ * we say (for simplicity) that we have 1 bank, always, even when
+ * we have more.  We always start at 0x80000000, and we place the
+ * initial stack pointer in our SRAM. Otherwise, we can define
+ * CONFIG_NR_DRAM_BANKS before including this file.
  */
+#ifndef CONFIG_NR_DRAM_BANKS
 #define CONFIG_NR_DRAM_BANKS		1
+#endif
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
 						GENERATED_GBL_DATA_SIZE)
@@ -237,7 +241,6 @@
 #define CONFIG_SPL_BOARD_INIT
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* OMAP4 and later ELM support */
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
new file mode 100644
index 0000000..854cb78
--- /dev/null
+++ b/include/configs/ti_omap3_common.h
@@ -0,0 +1,73 @@
+/*
+ * ti_omap3_common.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * For more details, please see the technical documents listed at
+ *   http://www.ti.com/product/omap3530
+ *   http://www.ti.com/product/omap3630
+ *   http://www.ti.com/product/dm3730
+ */
+
+#ifndef __CONFIG_TI_OMAP3_COMMON_H__
+#define __CONFIG_TI_OMAP3_COMMON_H__
+
+#define CONFIG_OMAP34XX
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap3.h>
+
+/* The chip has SDRC controller */
+#define CONFIG_SDRC
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+/* NS16550 Configuration */
+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600, \
+					115200}
+
+/* Select serial console configuration */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3
+
+/* Physical Memory Map */
+#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
+#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+
+/* TWL4030 */
+#define CONFIG_TWL4030_POWER		1
+
+/* SPL */
+#define CONFIG_SPL_TEXT_BASE		0x40200800
+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_POWER_SUPPORT
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_SIMPLE
+#endif
+
+/* Now bring in the rest of the common code. */
+#include <configs/ti_armv7_common.h>
+
+#endif	/* __CONFIG_TI_OMAP3_COMMON_H__ */
diff --git a/include/configs/omap4_common.h b/include/configs/ti_omap4_common.h
index d099bfd..2f0e4c0 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -9,8 +9,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __CONFIG_OMAP4_COMMON_H
-#define __CONFIG_OMAP4_COMMON_H
+#ifndef __CONFIG_TI_OMAP4_COMMON_H
+#define __CONFIG_TI_OMAP4_COMMON_H
 
 /*
  * High Level Configuration Options
@@ -159,4 +159,8 @@
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#endif /* __CONFIG_OMAP4_COMMON_H */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP4_COMMON_H */
diff --git a/include/configs/omap5_common.h b/include/configs/ti_omap5_common.h
index c7fa37e..7b10fbd 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -14,8 +14,8 @@
  * http://www.ti.com/product/omap5432
  */
 
-#ifndef __CONFIG_OMAP5_COMMON_H
-#define __CONFIG_OMAP5_COMMON_H
+#ifndef __CONFIG_TI_OMAP5_COMMON_H
+#define __CONFIG_TI_OMAP5_COMMON_H
 
 #define CONFIG_OMAP54XX
 #define CONFIG_DISPLAY_CPUINFO
@@ -146,4 +146,8 @@
 #define CONFIG_SPL_DISPLAY_PRINT
 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 
-#endif /* __CONFIG_OMAP5_COMMON_H */
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP5_COMMON_H */