x86: Remove eNET boards

These are no longer used and should be removed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 0 insertions, 619 deletions

diff --git a/include/configs/eNET.h b/include/configs/eNET.h
deleted file mode 100644
index 28cf95b..0000000
--- a/include/configs/eNET.h
+++ /dev/null
@@ -1,619 +0,0 @@
-/*
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/ibmpc.h>
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SYS_SC520
-#define CONFIG_SYS_SC520_SSI
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_LAST_STAGE_INIT
-
-/*-----------------------------------------------------------------------
- * Watchdog Configuration
- * NOTE: If CONFIG_HW_WATCHDOG is NOT defined, the watchdog jumper on the
- * bottom (processor) board MUST be removed!
- */
-#undef CONFIG_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-
-/*-----------------------------------------------------------------------
- * Real Time Clock Configuration
- */
-#define CONFIG_RTC_MC146818
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS		0
-
-/*-----------------------------------------------------------------------
- * Serial Configuration
- */
-#define CONFIG_CONS_INDEX			1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE		1
-#define CONFIG_SYS_NS16550_CLK			1843200
-#define CONFIG_BAUDRATE				9600
-#define CONFIG_SYS_BAUDRATE_TABLE		{300, 600, 1200, 2400, 4800, \
-						 9600, 19200, 38400, 115200}
-#define CONFIG_SYS_NS16550_COM1			UART0_BASE
-#define CONFIG_SYS_NS16550_COM2			UART1_BASE
-#define CONFIG_SYS_NS16550_COM3			(0x1000 + UART0_BASE)
-#define CONFIG_SYS_NS16550_COM4			(0x1000 + UART1_BASE)
-#define CONFIG_SYS_NS16550_PORT_MAPPED
-
-/*-----------------------------------------------------------------------
- * Video Configuration
- */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
-
-/*-----------------------------------------------------------------------
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_FPGA
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_IMLS
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_SOURCE
-#define CONFIG_CMD_XIMG
-#define CONFIG_CMD_ZBOOT
-
-#define CONFIG_BOOTDELAY			15
-#define CONFIG_BOOTARGS				"root=/dev/mtdblock0 console=ttyS0,9600"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE			115200
-#define CONFIG_KGDB_SER_INDEX			2
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP
-#define	CONFIG_SYS_PROMPT			"boot > "
-#define	CONFIG_SYS_CBSIZE			256
-#define	CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
-						 sizeof(CONFIG_SYS_PROMPT) + \
-						 16)
-#define	CONFIG_SYS_MAXARGS			16
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START		0x00100000
-#define CONFIG_SYS_MEMTEST_END			0x01000000
-#define	CONFIG_SYS_LOAD_ADDR			0x100000
-#define	CONFIG_SYS_HZ				1000
-
-/*-----------------------------------------------------------------------
- * SDRAM Configuration
- */
-#define CONFIG_SYS_SDRAM_DRCTMCTL		0x18
-#define CONFIG_SYS_SDRAM_REFRESH_RATE		156
-#define CONFIG_NR_DRAM_BANKS			4
-
-/* CONFIG_SYS_SDRAM_DRCTMCTL Overrides the following*/
-#undef CONFIG_SYS_SDRAM_PRECHARGE_DELAY
-#undef CONFIG_SYS_SDRAM_RAS_CAS_DELAY
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
-#undef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
-
-/*-----------------------------------------------------------------------
- * CPU Features
- */
-#define CONFIG_SYS_SC520_HIGH_SPEED		0
-#define CONFIG_SYS_SC520_RESET
-#define CONFIG_SYS_SC520_TIMER
-#undef  CONFIG_SYS_GENERIC_TIMER
-#define CONFIG_SYS_PCAT_INTERRUPTS
-#define CONFIG_SYS_NUM_IRQS			16
-#define CONFIG_SYS_PC_BIOS
-#define CONFIG_SYS_PCI_BIOS
-#define CONFIG_SYS_X86_REALMODE
-#define CONFIG_SYS_X86_ISR_TIMER
-
-/*-----------------------------------------------------------------------
- * Memory organization:
- * 32kB Stack
- * 16kB Cache-As-RAM @ 0x19200000
- * 256kB Monitor
- * (128kB + Environment Sector Size) malloc pool
- */
-#define CONFIG_SYS_STACK_SIZE			(32 * 1024)
-#define CONFIG_SYS_CAR_ADDR			0x19200000
-#define CONFIG_SYS_CAR_SIZE			(16 * 1024)
-#define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN			(256 * 1024)
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SECT_SIZE + \
-						 128*1024)
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*-----------------------------------------------------------------------
- * FLASH configuration
- * 512kB Boot Flash @ 0x38000000 (Monitor @ 38040000)
- * 16MB StrataFlash #1 @ 0x10000000
- * 16MB StrataFlash #2 @ 0x11000000
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_MAX_FLASH_BANKS		3
-#define CONFIG_SYS_FLASH_BASE			0x38000000
-#define CONFIG_SYS_FLASH_BASE_1			0x10000000
-#define CONFIG_SYS_FLASH_BASE_2			0x11000000
-#define CONFIG_SYS_FLASH_BANKS_LIST		{CONFIG_SYS_FLASH_BASE,   \
-						 CONFIG_SYS_FLASH_BASE_1, \
-						 CONFIG_SYS_FLASH_BASE_2}
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_MAX_FLASH_SECT		128
-#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_8BIT
-#define CONFIG_SYS_FLASH_LEGACY_512Kx8
-#define CONFIG_SYS_FLASH_ERASE_TOUT		2000	/* ms */
-#define CONFIG_SYS_FLASH_WRITE_TOUT		2000	/* ms */
-
-/*-----------------------------------------------------------------------
- * Environment configuration
- * - Boot flash is 512kB with 64kB sectors
- * - StrataFlash is 32MB with 128kB sectors
- * - Redundant embedded environment is 25% of the Boot flash
- * - Redundant StrataFlash environment is <1% of the StrataFlash
- * - Environment is therefore located in StrataFlash
- * - Primary copy is located in first sector of first flash
- * - Redundant copy is located in second sector of first flash
- * - Stack is only 32kB, so environment size is limited to 4kB
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE			0x20000
-#define CONFIG_ENV_SIZE				0x01000
-#define CONFIG_ENV_ADDR				CONFIG_SYS_FLASH_BASE_1
-#define CONFIG_ENV_ADDR_REDUND			(CONFIG_SYS_FLASH_BASE_1 + \
-						 CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND			CONFIG_ENV_SIZE
-
-/*-----------------------------------------------------------------------
- * PCI configuration
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
-#define CONFIG_SYS_FIRST_PCI_IRQ		10
-#define CONFIG_SYS_SECOND_PCI_IRQ		9
-#define CONFIG_SYS_THIRD_PCI_IRQ		11
-#define CONFIG_SYS_FORTH_PCI_IRQ		15
-
-/*-----------------------------------------------------------------------
- * Network device (TRL8100B) support
- */
-#define CONFIG_RTL8139
-
-/*-----------------------------------------------------------------------
- * BOOTCS Control (for AM29LV040B-120JC)
- *
- * 000 0 00 0 000 11 0 011 }- 0x0033
- * \ / | \| | \ / \| | \ /
- *  |  |  | |  |   | |  |
- *  |  |  | |  |   | |  +---- 3 Wait States (First Access)
- *  |  |  | |  |   | +------- Reserved
- *  |  |  | |  |   +--------- 3 Wait States (Subsequent Access)
- *  |  |  | |  +------------- Reserved
- *  |  |  | +---------------- Non-Paged Mode
- *  |  |  +------------------ 8 Bit Wide
- *  |  +--------------------- GP Bus
- *  +------------------------ Reserved
- */
-#define CONFIG_SYS_SC520_BOOTCS_CTRL		0x0033
-
-/*-----------------------------------------------------------------------
- * ROMCS Control (for E28F128J3A-150 StrataFlash)
- *
- * 000 0 01 1 000 01 0 101 }- 0x0615
- * \ / | \| | \ / \| | \ /
- *  |  |  | |  |   | |  |
- *  |  |  | |  |   | |  +---- 5 Wait States (First Access)
- *  |  |  | |  |   | +------- Reserved
- *  |  |  | |  |   +--------- 1 Wait State (Subsequent Access)
- *  |  |  | |  +------------- Reserved
- *  |  |  | +---------------- Paged Mode
- *  |  |  +------------------ 16 Bit Wide
- *  |  +--------------------- GP Bus
- *  +------------------------ Reserved
- */
-#define CONFIG_SYS_SC520_ROMCS1_CTRL		0x0615
-#define CONFIG_SYS_SC520_ROMCS2_CTRL		0x0615
-
-/*-----------------------------------------------------------------------
- * SC520 General Purpose Bus configuration
- *
- * Chip Select Offset		1 Clock Cycle
- * Chip Select Pulse Width	8 Clock Cycles
- * Chip Select Read Offset	2 Clock Cycles
- * Chip Select Read Width	6 Clock Cycles
- * Chip Select Write Offset	2 Clock Cycles
- * Chip Select Write Width	6 Clock Cycles
- * Chip Select Recovery Time	2 Clock Cycles
- *
- * Timing Diagram (from SC520 Register Set Manual - Order #22005B)
- *
- *   |<-------------General Purpose Bus Cycle---------------->|
- *   |                                                        |
- * ----------------------\__________________/------------------
- *   |<--(GPCSOFF + 1)-->|<--(GPCSPW + 1)-->|<-(GPCSRT + 1)-> |
- *
- * ------------------------\_______________/-------------------
- *   |<---(GPRDOFF + 1)--->|<-(GPRDW + 1)->|
- *
- * --------------------------\_______________/-----------------
- *   |<----(GPWROFF + 1)---->|<-(GPWRW + 1)->|
- *
- * ________/-----------\_______________________________________
- *   |<--->|<--------->|
- *      ^         ^
- * (GPALEOFF + 1) |
- *                |
- *         (GPALEW + 1)
- */
-#define CONFIG_SYS_SC520_GPCSOFF		0x00
-#define CONFIG_SYS_SC520_GPCSPW			0x07
-#define CONFIG_SYS_SC520_GPRDOFF		0x01
-#define CONFIG_SYS_SC520_GPRDW			0x05
-#define CONFIG_SYS_SC520_GPWROFF		0x01
-#define CONFIG_SYS_SC520_GPWRW			0x05
-#define CONFIG_SYS_SC520_GPCSRT			0x01
-
-/*-----------------------------------------------------------------------
- * SC520 Programmable I/O configuration
- *
- * Pin	  Mode		Dir.	Description
- * ----------------------------------------------------------------------
- * PIO0   PIO		Output	Unused
- * PIO1   GPBHE#	Output	GP Bus Byte High Enable (active low)
- * PIO2   PIO		Output	Auxiliary power output enable
- * PIO3   GPAEN		Output	GP Bus Address Enable
- * PIO4   PIO		Output	Top Board Enable (active low)
- * PIO5   PIO		Output	StrataFlash 16 bit mode (low = 8 bit mode)
- * PIO6   PIO		Input	Data output of Power Supply ADC
- * PIO7   PIO		Output	Clock input to Power Supply ADC
- * PIO8   PIO		Output  Chip Select input of Power Supply ADC
- * PIO9   PIO		Output	StrataFlash 1 Reset / Power Down (active low)
- * PIO10  PIO		Output	StrataFlash 2 Reset / Power Down (active low)
- * PIO11  PIO		Input	StrataFlash 1 Status
- * PIO12  PIO		Input	StrataFlash 2 Status
- * PIO13  GPIRQ10#	Input	Can Bus / I2C IRQ (active low)
- * PIO14  PIO		Input	Low Input Voltage Warning (active low)
- * PIO15  PIO		Output	Watchdog (must toggle at least every 1.6s)
- * PIO16  PIO		Input	Power Fail
- * PIO17  GPIRQ6	Input	Compact Flash 1 IRQ (active low)
- * PIO18  GPIRQ5	Input	Compact Flash 2 IRQ (active low)
- * PIO19  GPIRQ4#	Input	Dual-Port RAM IRQ (active low)
- * PIO20  GPIRQ3	Input	UART D IRQ
- * PIO21  GPIRQ2	Input	UART C IRQ
- * PIO22  GPIRQ1	Input	UART B IRQ
- * PIO23  GPIRQ0	Input	UART A IRQ
- * PIO24  GPDBUFOE#	Output	GP Bus Data Bus Buffer Output Enable
- * PIO25  PIO		Input	Battery OK Indication
- * PIO26  GPMEMCS16#	Input	GP Bus Memory Chip-Select 16-bit access
- * PIO27  GPCS0#	Output	SRAM 1 Chip Select
- * PIO28  PIO		Input	Top Board UART CTS
- * PIO29  PIO		Output	FPGA Program Mode (active low)
- * PIO30  PIO		Input	FPGA Initialised (active low)
- * PIO31  PIO		Input	FPGA Done (active low)
- */
-#define CONFIG_SYS_SC520_PIOPFS15_0		0x200a
-#define CONFIG_SYS_SC520_PIOPFS31_16		0x0dfe
-#define CONFIG_SYS_SC520_PIODIR15_0		0x87bf
-#define CONFIG_SYS_SC520_PIODIR31_16		0x2900
-
-/*-----------------------------------------------------------------------
- * PIO Pin defines
- */
-#define CONFIG_SYS_ENET_AUX_PWR			0x0004
-#define CONFIG_SYS_ENET_TOP_BRD_PWR		0x0010
-#define CONFIG_SYS_ENET_SF_WIDTH		0x0020
-#define CONFIG_SYS_ENET_PWR_ADC_DATA		0x0040
-#define CONFIG_SYS_ENET_PWR_ADC_CLK		0x0080
-#define CONFIG_SYS_ENET_PWR_ADC_CS		0x0100
-#define CONFIG_SYS_ENET_SF1_MODE		0x0200
-#define CONFIG_SYS_ENET_SF2_MODE		0x0400
-#define CONFIG_SYS_ENET_SF1_STATUS		0x0800
-#define CONFIG_SYS_ENET_SF2_STATUS		0x1000
-#define CONFIG_SYS_ENET_PWR_STATUS		0x4000
-#define CONFIG_SYS_ENET_WATCHDOG		0x8000
-
-#define CONFIG_SYS_ENET_PWR_FAIL		0x0001
-#define CONFIG_SYS_ENET_BAT_OK			0x0200
-#define CONFIG_SYS_ENET_TOP_BRD_CTS		0x1000
-#define CONFIG_SYS_ENET_FPGA_PROG		0x2000
-#define CONFIG_SYS_ENET_FPGA_INIT		0x4000
-#define CONFIG_SYS_ENET_FPGA_DONE		0x8000
-
-/*-----------------------------------------------------------------------
- * Chip Select Pin Function Select
- *
- * 1 1 1 1 1 0 0 0 }- 0xf8
- * | | | | | | | |
- * | | | | | | | +--- Reserved
- * | | | | | | +----- GPCS1_SEL = ROMCS1#
- * | | | | | +------- GPCS2_SEL = ROMCS2#
- * | | | | +--------- GPCS3_SEL = GPCS3
- * | | | +----------- GPCS4_SEL = GPCS4
- * | | +------------- GPCS5_SEL = GPCS5
- * | +--------------- GPCS6_SEL = GPCS6
- * +----------------- GPCS7_SEL = GPCS7
- */
-#define CONFIG_SYS_SC520_CSPFS			0xf8
-
-/*-----------------------------------------------------------------------
- * Clock Select (CLKTIMER[CLKTEST] pin)
- *
- * 0 111 00 1 0 }- 0x72
- * | \ / \| | |
- * |  |   | | +--- Pin Disabled
- * |  |   | +----- Pin is an output
- * |  |   +------- Reserved
- * |  +----------- Disabled (pin stays Low)
- * +-------------- Reserved
- */
-#define CONFIG_SYS_SC520_CLKSEL			0x72
-
-/*-----------------------------------------------------------------------
- * Address Decode Control
- *
- * 0 00 0 0 0 0 0 }- 0x00
- * | \| | | | | |
- * |  | | | | | +--- Integrated UART 1 is enabled
- * |  | | | | +----- Integrated UART 2 is enabled
- * |  | | | +------- Integrated RTC is enabled
- * |  | | +--------- Reserved
- * |  | +----------- I/O Hole accesses are forwarded to the external GP bus
- * |  +------------- Reserved
- * +---------------- Write-protect violations do not generate an IRQ
- */
-#define CONFIG_SYS_SC520_ADDDECCTL		0x00
-
-/*-----------------------------------------------------------------------
- * UART Control
- *
- * 00000 1 1 1 }- 0x07
- * \___/ | | |
- *   |   | | +--- Transmit TC interrupt enable
- *   |   | +----- Receive TC interrupt enable
- *   |   +------- 1.8432 MHz
- *   +----------- Reserved
- */
-#define CONFIG_SYS_SC520_UART1CTL		0x07
-#define CONFIG_SYS_SC520_UART2CTL		0x07
-
-/*-----------------------------------------------------------------------
- * System Arbiter Control
- *
- * 00000 1 1 0 }- 0x06
- * \___/ | | |
- *   |   | | +--- Disable PCI Bus Arbiter Grant Time-Out Interrupt
- *   |   | +----- The system arbiter operates in concurrent mode
- *   |   +------- Park the PCI bus on the last master that acquired the bus
- *   +----------- Reserved
- */
-#define CONFIG_SYS_SC520_SYSARBCTL		0x06
-
-/*-----------------------------------------------------------------------
- * System Arbiter Master Enable
- *
- * 00000000000 0 0 0 1 1 }- 0x06
- * \_________/ | | | | |
- *      |      | | | | +--- PCI master REQ0 enabled (Ethernet 1)
- *      |      | | | +----- PCI master REQ1 enabled (Ethernet 2)
- *      |      | | +------- PCI master REQ2 disabled
- *      |      | +--------- PCI master REQ3 disabled
- *      |      +----------- PCI master REQ4 disabled
- *      +------------------ Reserved
- */
-#define CONFIG_SYS_SC520_SYSARBMENB		0x0003
-
-/*-----------------------------------------------------------------------
- * System Arbiter Master Enable
- *
- * 0 0000 0 00 0000 1 000 }- 0x06
- * | \__/ | \| \__/ | \_/
- * |   |  |  |   |  |  +---- Reserved
- * |   |  |  |   |  +------- Enable CPU-to-PCI bus write posting
- * |   |  |  |   +---------- Reserved
- * |   |  |  +-------------- PCI bus reads to SDRAM are not automatically
- * |   |  |                  retried
- * |   |  +----------------- Target read FIFOs are not snooped during write
- * |   |                     transactions
- * |   +-------------------- Reserved
- * +------------------------ Deassert the PCI bus reset signal
- */
-#define CONFIG_SYS_SC520_HBCTL			0x08
-
-/*-----------------------------------------------------------------------
- * PAR for Boot Flash - 512kB @ 0x38000000, BOOTCS
- * 100 0 1 0 1 00000000111 11100000000000 }- 0x8a01f800
- * \ / | | | | \----+----/ \-----+------/
- *  |  | | | |      |            +---------- Start at 0x38000000
- *  |  | | | |      +----------------------- 512kB Region Size
- *  |  | | | |                               ((7 + 1) * 64kB)
- *  |  | | | +------------------------------ 64kB Page Size
- *  |  | | +-------------------------------- Writes Enabled (So it can be
- *  |  | |                                   reprogrammed!)
- *  |  | +---------------------------------- Caching Disabled
- *  |  +------------------------------------ Execution Enabled
- *  +--------------------------------------- BOOTCS
- */
-#define CONFIG_SYS_SC520_BOOTCS_PAR		0x8a01f800
-
-/*-----------------------------------------------------------------------
- * Cache-As-RAM (Targets Boot Flash)
- *
- * 100 1 0 0 0 0001111 011001001000000000 }- 0x903d9200
- * \ / | | | | \--+--/ \-------+--------/
- *  |  | | | |    |            +------------ Start at 0x19200000
- *  |  | | | |    +------------------------- 64k Region Size
- *  |  | | | |                               ((15 + 1) * 4kB)
- *  |  | | | +------------------------------ 4kB Page Size
- *  |  | | +-------------------------------- Writes Enabled
- *  |  | +---------------------------------- Caching Enabled
- *  |  +------------------------------------ Execution Prevented
- *  +--------------------------------------- BOOTCS
- */
-#define CONFIG_SYS_SC520_CAR_PAR		0x903d9200
-
-/*-----------------------------------------------------------------------
- * PAR for Low Level I/O (LEDs, Hex Switches etc) - 33 Bytes @ 0x1000, GPCS6
- *
- * 001 110 0 000100000 0001000000000000 }- 0x38201000
- * \ / \ / | \---+---/ \------+-------/
- *  |   |  |     |            +----------- Start at 0x00001000
- *  |   |  |     +------------------------ 33 Bytes (0x20 + 1)
- *  |   |  +------------------------------ Ignored
- *  |   +--------------------------------- GPCS6
- *  +------------------------------------- GP Bus I/O
- */
-#define CONFIG_SYS_SC520_LLIO_PAR		0x38201000
-
-/*-----------------------------------------------------------------------
- * PAR for Compact Flash Port #1 - 4kB @ 0x200000000, CS5
- * PAR for Compact Flash Port #2 - 4kB @ 0x200010000, CS7
- *
- * 010 101 0 0000000 100000000000000000 }- 0x54020000
- * 010 111 0 0000000 100000000000000001 }- 0x5c020001
- * \ / \ / | \--+--/ \-------+--------/
- *  |   |  |    |            +------------ Start at 0x200000000
- *  |   |  |    |                                   0x200010000
- *  |   |  |    +------------------------- 4kB Region Size
- *  |   |  |                               ((0 + 1) * 4kB)
- *  |   |  +------------------------------ 4k Page Size
- *  |   +--------------------------------- GPCS5
- *  |                                      GPCS7
- *  +------------------------------------- GP Bus Memory
- */
-#define CONFIG_SYS_SC520_CF1_PAR		0x54020000
-#define CONFIG_SYS_SC520_CF2_PAR		0x5c020001
-
-/*-----------------------------------------------------------------------
- * PAR for Extra 16550 UART A - 8 bytes @ 0x013f8, GPCS0
- * PAR for Extra 16550 UART B - 8 bytes @ 0x012f8, GPCS3
- * PAR for Extra 16550 UART C - 8 bytes @ 0x011f8, GPCS4
- * PAR for Extra 16550 UART D - 8 bytes @ 0x010f8, GPCS5
- *
- * 001 000 0 000000111 0001001111111000 }- 0x200713f8
- * 001 011 0 000000111 0001001011111000 }- 0x2c0712f8
- * 001 011 0 000000111 0001001011111000 }- 0x300711f8
- * 001 011 0 000000111 0001001011111000 }- 0x340710f8
- * \ / \ / | \---+---/ \------+-------/
- *  |   |  |     |            +----------- Start at 0x013f8
- *  |   |  |     |                                  0x012f8
- *  |   |  |     |                                  0x011f8
- *  |   |  |     |                                  0x010f8
- *  |   |  |     +------------------------ 33 Bytes (32 + 1)
- *  |   |  +------------------------------ Ignored
- *  |   +--------------------------------- GPCS6
- *  +------------------------------------- GP Bus I/O
- */
-#define CONFIG_SYS_SC520_UARTA_PAR		0x200713f8
-#define CONFIG_SYS_SC520_UARTB_PAR		0x2c0712f8
-#define CONFIG_SYS_SC520_UARTC_PAR		0x300711f8
-#define CONFIG_SYS_SC520_UARTD_PAR		0x340710f8
-
-/*-----------------------------------------------------------------------
- * PAR for StrataFlash #1 - 16MB @ 0x10000000, ROMCS1
- * PAR for StrataFlash #2 - 16MB @ 0x11000000, ROMCS2
- *
- * 101 0 1 0 1 00011111111 01000000000000 }- 0xaa3fd000
- * 110 0 1 0 1 00011111111 01000100000000 }- 0xca3fd100
- * \ / | | | | \----+----/ \-----+------/
- *  |  | | | |      |            +---------- Start at 0x10000000
- *  |  | | | |      |                                 0x11000000
- *  |  | | | |      +----------------------- 16MB Region Size
- *  |  | | | |                               ((255 + 1) * 64kB)
- *  |  | | | +------------------------------ 64kB Page Size
- *  |  | | +-------------------------------- Writes Enabled
- *  |  | +---------------------------------- Caching Disabled
- *  |  +------------------------------------ Execution Enabled
- *  +--------------------------------------- ROMCS1
- *                                           ROMCS2
- */
-#define CONFIG_SYS_SC520_SF1_PAR		0xaa3fd000
-#define CONFIG_SYS_SC520_SF2_PAR		0xca3fd100
-
-/*-----------------------------------------------------------------------
- * PAR for SRAM #1 - 1MB @ 0x19000000, GPCS0
- * PAR for SRAM #2 - 1MB @ 0x19100000, GPCS3
- *
- * 010 000 1 00000001111 01100100000000 }- 0x4203d900
- * 010 011 1 00000001111 01100100010000 }- 0x4e03d910
- * \ / \ / | \----+----/ \-----+------/
- *  |   |  |      |            +---------- Start at 0x19000000
- *  |   |  |      |                                 0x19100000
- *  |   |  |      +----------------------- 1MB Region Size
- *  |   |  |                               ((15 + 1) * 64kB)
- *  |   |  +------------------------------ 64kB Page Size
- *  |   +--------------------------------- GPCS0
- *  |                                      GPCS3
- *  +------------------------------------- GP Bus Memory
- */
-#define CONFIG_SYS_SC520_SRAM1_PAR		0x4203d900
-#define CONFIG_SYS_SC520_SRAM2_PAR		0x4e03d910
-
-/*-----------------------------------------------------------------------
- * PAR for Dual-Port RAM - 4kB @ 0x18100000, GPCS4
- *
- * 010 100 0 00000000 11000000100000000 }- 0x50018100
- * \ / \ / | \---+--/ \-------+-------/
- *  |   |  |     |            +----------- Start at 0x18100000
- *  |   |  |     +------------------------ 4kB Region Size
- *  |   |  |                               ((0 + 1) * 4kB)
- *  |   |  +------------------------------ 4kB Page Size
- *  |   +--------------------------------- GPCS4
- *  +------------------------------------- GP Bus Memory
- */
-#define CONFIG_SYS_SC520_DPRAM_PAR		0x50018100
-
-#endif	/* __CONFIG_H */