Add support for UEC to 8568

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

3 files changed, 72 insertions, 12 deletions

diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index bbaeb3f..1f1583a 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -71,16 +71,16 @@ typedef	struct	global_data {
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_MPC8360)
+	u32  ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
+#endif
 #if defined(CONFIG_QE)
 	u32 qe_clk;
 	u32 brg_clk;
 	uint mp_alloc_base;
 	uint mp_alloc_top;
 #endif /* CONFIG_QE */
-#if defined (CONFIG_MPC8360)
-	u32  ddr_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
 	unsigned long	pci_clk;
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index 950b949..a16a6d3 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -281,6 +281,17 @@ typedef struct ucc_slow {
 	u8 res4[0x200 - 0x091];
 } __attribute__ ((packed)) ucc_slow_t;
 
+typedef struct ucc_mii_mng {
+	u32 miimcfg;		/* MII management configuration reg    */
+	u32 miimcom;		/* MII management command reg          */
+	u32 miimadd;		/* MII management address reg          */
+	u32 miimcon;		/* MII management control reg          */
+	u32 miimstat;		/* MII management status reg           */
+	u32 miimind;		/* MII management indication reg       */
+	u32 ifctl;		/* interface control reg               */
+	u32 ifstat;		/* interface statux reg                */
+} __attribute__ ((packed))uec_mii_t;
+
 typedef struct ucc_ethernet {
 	u32 maccfg1;		/* mac configuration reg. 1            */
 	u32 maccfg2;		/* mac configuration reg. 2            */
@@ -540,14 +551,21 @@ typedef struct qe_immap {
 	u8 res14[0x300];
 	u8 res15[0x3A00];
 	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
+#if defined(CONFIG_MPC8568)
+	u8 muram[0x10000];	/* 0x1_0000 -  0x2_0000 Multi-user RAM */
+	u8 res17[0x20000];	/* 0x2_0000 -  0x4_0000 */
+#else
 	u8 muram[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
 	u8 res17[0x24000];	/* 0x11C000 -  0x140000 */
 	u8 res18[0xC0000];	/* 0x140000 -  0x200000 */
+#endif
 } __attribute__ ((packed)) qe_map_t;
 
 extern qe_map_t *qe_immr;
 
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8568)
+#define QE_MURAM_SIZE		0x10000UL
+#elif defined(CONFIG_MPC8360)
 #define QE_MURAM_SIZE		0xc000UL
 #elif defined(CONFIG_MPC832X)
 #define QE_MURAM_SIZE		0x4000UL
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 5bc953a..dc9cb1f 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -28,20 +28,21 @@
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500			1	/* BOOKE e500 family */
+#define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48/68 */
 #define CONFIG_MPC8568		1	/* MPC8568 specific */
 #define CONFIG_MPC8568MDS	1	/* MPC8568MDS board specific */
 
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#undef CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 /*#define CONFIG_DDR_2T_TIMING		 Sets the 2T timing bit */
 
 /*#define CONFIG_DDR_ECC*/			/* only for ECC DDR module */
-/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/	/* 	 DDR controller or DMA? */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
 
@@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void);
 
 #define OF_CPU			"PowerPC,8568@0"
 #define OF_SOC			"soc8568@e0000000"
+#define OF_QE			"qe@e0080000"
 #define OF_TBCLK		(bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH		"/soc8568@e0000000/serial@4600"
 
@@ -311,7 +313,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x52
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0,0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 #define CFG_I2C2_OFFSET		0x3100
 
@@ -340,6 +342,44 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
 
+#ifdef CONFIG_QE
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#ifndef CONFIG_TSEC_ENET
+#define CONFIG_ETHPRIME         "Freescale GETH"
+#endif
+#define CONFIG_PHY_MODE_NEED_CHANGE
+#define CONFIG_eTSEC_MDIO_BUS
+
+#ifdef CONFIG_eTSEC_MDIO_BUS
+#define CONFIG_MIIM_ADDRESS 	0xE0024520
+#endif
+
+#define CONFIG_UEC_ETH1         /* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM        0       /* UCC1 */
+#define CFG_UEC1_RX_CLK         QE_CLK_NONE
+#define CFG_UEC1_TX_CLK         QE_CLK16
+#define CFG_UEC1_ETH_TYPE       GIGA_ETH
+#define CFG_UEC1_PHY_ADDR       7
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2         /* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM        1       /* UCC2 */
+#define CFG_UEC2_RX_CLK         QE_CLK_NONE
+#define CFG_UEC2_TX_CLK         QE_CLK16
+#define CFG_UEC2_ETH_TYPE       GIGA_ETH
+#define CFG_UEC2_PHY_ADDR       1
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+#endif /* CONFIG_QE */
+
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -348,13 +388,12 @@ extern unsigned long get_clock_freq(void);
 
 #endif	/* CONFIG_PCI */
 
-
-#if defined(CONFIG_TSEC_ENET)
-
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI 	1
 #endif
 
+#if defined(CONFIG_TSEC_ENET)
+
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_TSEC1	1
 #define CONFIG_TSEC1_NAME	"eTSEC0"
@@ -460,12 +499,15 @@ extern unsigned long get_clock_freq(void);
  */
 
 /* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253