ENGR00170299-1 Android: add support fastboot function

add support for otg in MX6Q uboot to enable fastboot function.

Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>

5 files changed, 562 insertions, 1 deletions

diff --git a/include/asm-arm/arch-mx6/iomux-v3.h b/include/asm-arm/arch-mx6/iomux-v3.h
index 01aeaeb..750cb61 100644
--- a/include/asm-arm/arch-mx6/iomux-v3.h
+++ b/include/asm-arm/arch-mx6/iomux-v3.h
@@ -140,6 +140,11 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
 
 /*
+ * Set bits for general purpose registers
+ */
+void mxc_iomux_set_gpr_register(int group, int start_bit, int num_bits, int value);
+
+/*
  * Initialise the iomux controller
  */
 void mxc_iomux_v3_init(void *iomux_v3_base);
diff --git a/include/asm-arm/arch-mx6/mx6.h b/include/asm-arm/arch-mx6/mx6.h
index e7f06fc..81edff6 100644
--- a/include/asm-arm/arch-mx6/mx6.h
+++ b/include/asm-arm/arch-mx6/mx6.h
@@ -218,6 +218,8 @@
 #define WDOG2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x40000)
 #define CCM_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x44000)
 #define ANATOP_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x48000)
+#define USB_PHY0_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x49000)
+#define USB_PHY1_BASE_ADDR          (AIPS1_OFF_BASE_ADDR + 0x4A000)
 #define SNVS_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x4C000)
 #define EPIT1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x50000)
 #define EPIT2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x54000)
diff --git a/include/asm-arm/arch-mx6/mx6_pins.h b/include/asm-arm/arch-mx6/mx6_pins.h
index 97931b5..50fd6f5 100644
--- a/include/asm-arm/arch-mx6/mx6_pins.h
+++ b/include/asm-arm/arch-mx6/mx6_pins.h
@@ -2251,6 +2251,8 @@ typedef enum iomux_config {
 		IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0)
 #define _MX6Q_PAD_GPIO_1__KPP_ROW_5                                            \
 		IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0)
+#define MX6Q_PAD_GPIO_1__USBOTG_ID					       \
+		IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, MX6Q_USDHC_PAD_CTRL)
 #define _MX6Q_PAD_GPIO_1__PWM2_PWMO                                            \
 		IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0)
 #define _MX6Q_PAD_GPIO_1__GPIO_1_1                                             \
diff --git a/include/usb/imx_udc.h b/include/usb/imx_udc.h
index 039d480..ca751ff 100644
--- a/include/usb/imx_udc.h
+++ b/include/usb/imx_udc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -28,6 +28,22 @@
 #ifndef _IMX_UDC_H_
 #define _IMX_UDC_H_
 
+#include <usbdevice.h>
+
+#define USB_OTGREGS_BASE	(OTG_BASE_ADDR + 0x000)
+#define USB_H1REGS_BASE		(OTG_BASE_ADDR + 0x200)
+#define USB_H2REGS_BASE		(OTG_BASE_ADDR + 0x400)
+#if (defined CONFIG_MX6Q || defined CONFIG_MX53 || defined CONFIG_MX51 || CONFIG_MX50)
+#define USB_H3REGS_BASE		(OTG_BASE_ADDR + 0x600)
+#define USB_OTHERREGS_BASE	(OTG_BASE_ADDR + 0x800)
+#else
+#define USB_OTHERREGS_BASE	(OTG_BASE_ADDR + 0x600)
+#endif
+
+#define USBOTG_REG32(offset)	(USB_OTGREGS_BASE + (offset))
+#define USBOTG_REG16(offset)	(USB_OTGREGS_BASE + (offset))
+#define USBOTHER_REG(offset)	(USB_OTHERREGS_BASE + (offset))
+
 #define USB_ID               (OTG_BASE_ADDR + 0x0000)
 #define USB_HWGENERAL        (OTG_BASE_ADDR + 0x0004)
 #define USB_HWHOST           (OTG_BASE_ADDR + 0x0008)
@@ -63,6 +79,36 @@
 #define USB_ENDPTCOMPLETE    (OTG_BASE_ADDR + 0x01BC)
 #define USB_ENDPTCTRL(n)     (OTG_BASE_ADDR + 0x01C0 + (4 * (n)))
 
+/*
+ * other regs (not part of ARC core)
+ */
+#define USBCTRL			USBOTHER_REG(0x00)	/* USB Control register */
+#define USB_OTG_MIRROR		USBOTHER_REG(0x04)	/* USB OTG mirror register */
+#define USB_PHY_CTR_FUNC	USBOTHER_REG(0x08)      /* OTG UTMI PHY Function Control register */
+#define USB_PHY_CTR_FUNC2	USBOTHER_REG(0x0c)      /* OTG UTMI PHY Function Control register */
+#define USB_CTRL_1		USBOTHER_REG(0x10)	/* USB Cotrol Register 1*/
+#define USBCTRL_HOST2		USBOTHER_REG(0x14)	/* USB Cotrol Register 1*/
+#define USBCTRL_HOST3		USBOTHER_REG(0x18)	/* USB Cotrol Register 1*/
+#define USBH1_PHY_CTRL0		USBOTHER_REG(0x1c)	/* USB Cotrol Register 1*/
+#define USBH1_PHY_CTRL1		USBOTHER_REG(0x20)	/* USB Cotrol Register 1*/
+#define USB_CLKONOFF_CTRL       USBOTHER_REG(0x24)      /* USB Clock on/off Control Register */
+/* mx6x other regs */
+#define USB_OTG_CTRL			USBOTHER_REG(0x00)	/* USB OTG Control register */
+#define USB_H1_CTRL			USBOTHER_REG(0x04)	/* USB H1 Control register */
+#define USB_H2_CTRL			USBOTHER_REG(0x08)	/* USB H2 Control register */
+#define USB_H3_CTRL			USBOTHER_REG(0x0c)	/* USB H3 Control register */
+#define USB_UH2_HSIC_CTRL		USBOTHER_REG(0x10)	/* USB Host2 HSIC Control Register */
+#define USB_UH3_HSIC_CTRL		USBOTHER_REG(0x14)	/* USB Host3 HSIC Control Register */
+#define USB_OTG_PHY_CTRL_0		USBOTHER_REG(0x18)	/* OTG UTMI PHY Control 0 Register */
+#define USB_H1_PHY_CTRL_0		USBOTHER_REG(0x1c)	/* OTG UTMI PHY Control 1 Register */
+#define USB_UH2_HSIC_DLL_CFG1		USBOTHER_REG(0x20)      /* USB Host2 HSIC DLL Configuration Register 1 */
+#define USB_UH2_HSIC_DLL_CFG2		USBOTHER_REG(0x24)      /* USB Host2 HSIC DLL Configuration Register 2 */
+#define USB_UH2_HSIC_DLL_CFG3		USBOTHER_REG(0x28)      /* USB Host2 HSIC DLL Configuration Register 3 */
+#define USB_UH3_HSIC_DLL_CFG1		USBOTHER_REG(0x30)      /* USB Host3 HSIC DLL Configuration Register 1 */
+#define USB_UH3_HSIC_DLL_CFG2		USBOTHER_REG(0x34)      /* USB Host3 HSIC DLL Configuration Register 2 */
+#define USB_UH3_HSIC_DLL_CFG3		USBOTHER_REG(0x38)      /* USB Host3 HSIC DLL Configuration Register 3 */
+
+
 #define USB_PHY1_CTRL        (OTG_BASE_ADDR + 0x80C)
 #define USBCMD_RESET   2
 #define USBCMD_ATTACH  1
@@ -396,6 +442,33 @@ struct ep_queue_item {
 #define UDC_INT_PACKET_SIZE     USB_MAX_CTRL_PAYLOAD
 #define UDC_BULK_PACKET_SIZE    USB_MAX_CTRL_PAYLOAD
 
+/* mx6q's register bit begins*/
+
+/* OTG CTRL - H3 CTRL */
+#define UCTRL_OWIR		(1 << 31)	/* OTG wakeup intr request received */
+/* bit 18 - bit 30 is reserved at mx6q */
+#define UCTRL_WKUP_VBUS_EN	(1 << 17)	/* OTG wake-up on VBUS change enable */
+#define UCTRL_WKUP_ID_EN	(1 << 16)	/* OTG wake-up on ID change enable */
+#define UCTRL_WKUP_SW		(1 << 15)	/* OTG Software Wake-up */
+#define UCTRL_WKUP_SW_EN	(1 << 14)	/* OTG Software Wake-up enable */
+#define UCTRL_UTMI_ON_CLOCK	(1 << 13)	/* Force OTG UTMI PHY clock output on even if suspend mode */
+#define UCTRL_SUSPENDM		(1 << 12)	/* Force OTG UTMI PHY Suspend */
+#define UCTRL_RESET		(1 << 11)	/* Force OTG UTMI PHY Reset */
+#define UCTRL_OWIE		(1 << 10)	/* OTG wakeup intr request received */
+#define UCTRL_PM		(1 << 9)	/* OTG Power Mask */
+#define UCTRL_OVER_CUR_POL	(1 << 8)	/* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS	(1 << 7)	/* Disable OTG Overcurrent Detection */
+/* bit 0 - bit 6 is reserved at mx6q */
+
+/* Host2/3 HSIC Ctrl */
+#define CLK_VLD		(1 << 31)	/* Indicating whether HSIC clock is valid */
+#define HSIC_EN		(1 << 12)	/* HSIC enable */
+#define HSIC_CLK_ON		(1 << 11)	/* Force HSIC module 480M clock on,
+						 * even when in Host is in suspend mode
+						 */
+/* OTG/HOST1 Phy Ctrl */
+#define PHY_UTMI_CLK_VLD	(1 << 31)	/* Indicating whether OTG UTMI PHY Clock Valida */
+
 int  udc_init(void);
 
 void udc_enable(struct usb_device_instance *device);
diff --git a/include/usb/regs-usbphy-mx6.h b/include/usb/regs-usbphy-mx6.h
new file mode 100644
index 0000000..060b176
--- /dev/null
+++ b/include/usb/regs-usbphy-mx6.h
@@ -0,0 +1,479 @@
+/*
+ * Freescale USBPHY Register Definitions
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.2
+ * Template revision: 1.3
+ */
+
+#ifndef __ARCH_ARM___USBPHY_H
+#define __ARCH_ARM___USBPHY_H
+
+
+#define HW_USBPHY_PWD	(0x00000000)
+#define HW_USBPHY_PWD_SET	(0x00000004)
+#define HW_USBPHY_PWD_CLR	(0x00000008)
+#define HW_USBPHY_PWD_TOG	(0x0000000c)
+
+#define BP_USBPHY_PWD_RSVD2      21
+#define BM_USBPHY_PWD_RSVD2 0xFFE00000
+#define BF_USBPHY_PWD_RSVD2(v) \
+	(((v) << 21) & BM_USBPHY_PWD_RSVD2)
+#define BM_USBPHY_PWD_RXPWDRX 0x00100000
+#define BM_USBPHY_PWD_RXPWDDIFF 0x00080000
+#define BM_USBPHY_PWD_RXPWD1PT1 0x00040000
+#define BM_USBPHY_PWD_RXPWDENV 0x00020000
+#define BP_USBPHY_PWD_RSVD1      13
+#define BM_USBPHY_PWD_RSVD1 0x0001E000
+#define BF_USBPHY_PWD_RSVD1(v)  \
+	(((v) << 13) & BM_USBPHY_PWD_RSVD1)
+#define BM_USBPHY_PWD_TXPWDV2I 0x00001000
+#define BM_USBPHY_PWD_TXPWDIBIAS 0x00000800
+#define BM_USBPHY_PWD_TXPWDFS 0x00000400
+#define BP_USBPHY_PWD_RSVD0      0
+#define BM_USBPHY_PWD_RSVD0 0x000003FF
+#define BF_USBPHY_PWD_RSVD0(v)  \
+	(((v) << 0) & BM_USBPHY_PWD_RSVD0)
+
+#define HW_USBPHY_TX	(0x00000010)
+#define HW_USBPHY_TX_SET	(0x00000014)
+#define HW_USBPHY_TX_CLR	(0x00000018)
+#define HW_USBPHY_TX_TOG	(0x0000001c)
+
+#define BP_USBPHY_TX_RSVD5      29
+#define BM_USBPHY_TX_RSVD5 0xE0000000
+#define BF_USBPHY_TX_RSVD5(v) \
+	(((v) << 29) & BM_USBPHY_TX_RSVD5)
+#define BP_USBPHY_TX_USBPHY_TX_EDGECTRL      26
+#define BM_USBPHY_TX_USBPHY_TX_EDGECTRL 0x1C000000
+#define BF_USBPHY_TX_USBPHY_TX_EDGECTRL(v)  \
+	(((v) << 26) & BM_USBPHY_TX_USBPHY_TX_EDGECTRL)
+#define BM_USBPHY_TX_USBPHY_TX_SYNC_INVERT 0x02000000
+#define BM_USBPHY_TX_USBPHY_TX_SYNC_MUX 0x01000000
+#define BP_USBPHY_TX_RSVD4      22
+#define BM_USBPHY_TX_RSVD4 0x00C00000
+#define BF_USBPHY_TX_RSVD4(v)  \
+	(((v) << 22) & BM_USBPHY_TX_RSVD4)
+#define BM_USBPHY_TX_TXENCAL45DP 0x00200000
+#define BM_USBPHY_TX_RSVD3 0x00100000
+#define BP_USBPHY_TX_TXCAL45DP      16
+#define BM_USBPHY_TX_TXCAL45DP 0x000F0000
+#define BF_USBPHY_TX_TXCAL45DP(v)  \
+	(((v) << 16) & BM_USBPHY_TX_TXCAL45DP)
+#define BP_USBPHY_TX_RSVD2      14
+#define BM_USBPHY_TX_RSVD2 0x0000C000
+#define BF_USBPHY_TX_RSVD2(v)  \
+	(((v) << 14) & BM_USBPHY_TX_RSVD2)
+#define BM_USBPHY_TX_TXENCAL45DN 0x00002000
+#define BM_USBPHY_TX_RSVD1 0x00001000
+#define BP_USBPHY_TX_TXCAL45DN      8
+#define BM_USBPHY_TX_TXCAL45DN 0x00000F00
+#define BF_USBPHY_TX_TXCAL45DN(v)  \
+	(((v) << 8) & BM_USBPHY_TX_TXCAL45DN)
+#define BP_USBPHY_TX_RSVD0      4
+#define BM_USBPHY_TX_RSVD0 0x000000F0
+#define BF_USBPHY_TX_RSVD0(v)  \
+	(((v) << 4) & BM_USBPHY_TX_RSVD0)
+#define BP_USBPHY_TX_D_CAL      0
+#define BM_USBPHY_TX_D_CAL 0x0000000F
+#define BF_USBPHY_TX_D_CAL(v)  \
+	(((v) << 0) & BM_USBPHY_TX_D_CAL)
+
+#define HW_USBPHY_RX	(0x00000020)
+#define HW_USBPHY_RX_SET	(0x00000024)
+#define HW_USBPHY_RX_CLR	(0x00000028)
+#define HW_USBPHY_RX_TOG	(0x0000002c)
+
+#define BP_USBPHY_RX_RSVD2      23
+#define BM_USBPHY_RX_RSVD2 0xFF800000
+#define BF_USBPHY_RX_RSVD2(v) \
+	(((v) << 23) & BM_USBPHY_RX_RSVD2)
+#define BM_USBPHY_RX_RXDBYPASS 0x00400000
+#define BP_USBPHY_RX_RSVD1      7
+#define BM_USBPHY_RX_RSVD1 0x003FFF80
+#define BF_USBPHY_RX_RSVD1(v)  \
+	(((v) << 7) & BM_USBPHY_RX_RSVD1)
+#define BP_USBPHY_RX_DISCONADJ      4
+#define BM_USBPHY_RX_DISCONADJ 0x00000070
+#define BF_USBPHY_RX_DISCONADJ(v)  \
+	(((v) << 4) & BM_USBPHY_RX_DISCONADJ)
+#define BM_USBPHY_RX_RSVD0 0x00000008
+#define BP_USBPHY_RX_ENVADJ      0
+#define BM_USBPHY_RX_ENVADJ 0x00000007
+#define BF_USBPHY_RX_ENVADJ(v)  \
+	(((v) << 0) & BM_USBPHY_RX_ENVADJ)
+
+#define HW_USBPHY_CTRL	(0x00000030)
+#define HW_USBPHY_CTRL_SET	(0x00000034)
+#define HW_USBPHY_CTRL_CLR	(0x00000038)
+#define HW_USBPHY_CTRL_TOG	(0x0000003c)
+
+#define BM_USBPHY_CTRL_SFTRST 0x80000000
+#define BM_USBPHY_CTRL_CLKGATE 0x40000000
+#define BM_USBPHY_CTRL_UTMI_SUSPENDM 0x20000000
+#define BM_USBPHY_CTRL_HOST_FORCE_LS_SE0 0x10000000
+#define BM_USBPHY_CTRL_OTG_ID_VALUE 0x08000000
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS 0x04000000
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE 0x02000000
+#define BM_USBPHY_CTRL_FSDLL_RST_EN 0x01000000
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP 0x00800000
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP 0x00400000
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP 0x00200000
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD 0x00100000
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE 0x00080000
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL 0x00040000
+#define BM_USBPHY_CTRL_WAKEUP_IRQ 0x00020000
+#define BM_USBPHY_CTRL_ENIRQWAKEUP 0x00010000
+#define BM_USBPHY_CTRL_ENUTMILEVEL3 0x00008000
+#define BM_USBPHY_CTRL_ENUTMILEVEL2 0x00004000
+#define BM_USBPHY_CTRL_DATA_ON_LRADC 0x00002000
+#define BM_USBPHY_CTRL_DEVPLUGIN_IRQ 0x00001000
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
+#define BM_USBPHY_CTRL_RESUME_IRQ 0x00000400
+#define BM_USBPHY_CTRL_ENIRQRESUMEDETECT 0x00000200
+#define BM_USBPHY_CTRL_RESUMEIRQSTICKY 0x00000100
+#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
+#define BM_USBPHY_CTRL_OTG_ID_CHG_IRQ 0x00000040
+#define BM_USBPHY_CTRL_DEVPLUGIN_POLARITY 0x00000020
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
+#define BM_USBPHY_CTRL_HOSTDISCONDETECT_IRQ 0x00000008
+#define BM_USBPHY_CTRL_ENIRQHOSTDISCON 0x00000004
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
+#define BM_USBPHY_CTRL_ENOTG_ID_CHG_IRQ 0x00000001
+
+#define HW_USBPHY_STATUS	(0x00000040)
+
+#define BP_USBPHY_STATUS_RSVD4      11
+#define BM_USBPHY_STATUS_RSVD4 0xFFFFF800
+#define BF_USBPHY_STATUS_RSVD4(v) \
+	(((v) << 11) & BM_USBPHY_STATUS_RSVD4)
+#define BM_USBPHY_STATUS_RESUME_STATUS 0x00000400
+#define BM_USBPHY_STATUS_RSVD3 0x00000200
+#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
+#define BM_USBPHY_STATUS_RSVD2 0x00000080
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
+#define BP_USBPHY_STATUS_RSVD1      4
+#define BM_USBPHY_STATUS_RSVD1 0x00000030
+#define BF_USBPHY_STATUS_RSVD1(v)  \
+	(((v) << 4) & BM_USBPHY_STATUS_RSVD1)
+#define BM_USBPHY_STATUS_HOSTDISCONDETECT_STATUS 0x00000008
+#define BP_USBPHY_STATUS_RSVD0      0
+#define BM_USBPHY_STATUS_RSVD0 0x00000007
+#define BF_USBPHY_STATUS_RSVD0(v)  \
+	(((v) << 0) & BM_USBPHY_STATUS_RSVD0)
+
+#define HW_USBPHY_DEBUG	(0x00000050)
+#define HW_USBPHY_DEBUG_SET	(0x00000054)
+#define HW_USBPHY_DEBUG_CLR	(0x00000058)
+#define HW_USBPHY_DEBUG_TOG	(0x0000005c)
+
+#define BM_USBPHY_DEBUG_RSVD3 0x80000000
+#define BM_USBPHY_DEBUG_CLKGATE 0x40000000
+#define BM_USBPHY_DEBUG_HOST_RESUME_DEBUG 0x20000000
+#define BP_USBPHY_DEBUG_SQUELCHRESETLENGTH      25
+#define BM_USBPHY_DEBUG_SQUELCHRESETLENGTH 0x1E000000
+#define BF_USBPHY_DEBUG_SQUELCHRESETLENGTH(v)  \
+	(((v) << 25) & BM_USBPHY_DEBUG_SQUELCHRESETLENGTH)
+#define BM_USBPHY_DEBUG_ENSQUELCHRESET 0x01000000
+#define BP_USBPHY_DEBUG_RSVD2      21
+#define BM_USBPHY_DEBUG_RSVD2 0x00E00000
+#define BF_USBPHY_DEBUG_RSVD2(v)  \
+	(((v) << 21) & BM_USBPHY_DEBUG_RSVD2)
+#define BP_USBPHY_DEBUG_SQUELCHRESETCOUNT      16
+#define BM_USBPHY_DEBUG_SQUELCHRESETCOUNT 0x001F0000
+#define BF_USBPHY_DEBUG_SQUELCHRESETCOUNT(v)  \
+	(((v) << 16) & BM_USBPHY_DEBUG_SQUELCHRESETCOUNT)
+#define BP_USBPHY_DEBUG_RSVD1      13
+#define BM_USBPHY_DEBUG_RSVD1 0x0000E000
+#define BF_USBPHY_DEBUG_RSVD1(v)  \
+	(((v) << 13) & BM_USBPHY_DEBUG_RSVD1)
+#define BM_USBPHY_DEBUG_ENTX2RXCOUNT 0x00001000
+#define BP_USBPHY_DEBUG_TX2RXCOUNT      8
+#define BM_USBPHY_DEBUG_TX2RXCOUNT 0x00000F00
+#define BF_USBPHY_DEBUG_TX2RXCOUNT(v)  \
+	(((v) << 8) & BM_USBPHY_DEBUG_TX2RXCOUNT)
+#define BP_USBPHY_DEBUG_RSVD0      6
+#define BM_USBPHY_DEBUG_RSVD0 0x000000C0
+#define BF_USBPHY_DEBUG_RSVD0(v)  \
+	(((v) << 6) & BM_USBPHY_DEBUG_RSVD0)
+#define BP_USBPHY_DEBUG_ENHSTPULLDOWN      4
+#define BM_USBPHY_DEBUG_ENHSTPULLDOWN 0x00000030
+#define BF_USBPHY_DEBUG_ENHSTPULLDOWN(v)  \
+	(((v) << 4) & BM_USBPHY_DEBUG_ENHSTPULLDOWN)
+#define BP_USBPHY_DEBUG_HSTPULLDOWN      2
+#define BM_USBPHY_DEBUG_HSTPULLDOWN 0x0000000C
+#define BF_USBPHY_DEBUG_HSTPULLDOWN(v)  \
+	(((v) << 2) & BM_USBPHY_DEBUG_HSTPULLDOWN)
+#define BM_USBPHY_DEBUG_DEBUG_INTERFACE_HOLD 0x00000002
+#define BM_USBPHY_DEBUG_OTGIDPIOLOCK 0x00000001
+
+#define HW_USBPHY_DEBUG0_STATUS	(0x00000060)
+
+#define BP_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT      26
+#define BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 0xFC000000
+#define BF_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT(v) \
+	(((v) << 26) & BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT)
+#define BP_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT      16
+#define BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT 0x03FF0000
+#define BF_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT(v)  \
+	(((v) << 16) & BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT)
+#define BP_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT      0
+#define BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT 0x0000FFFF
+#define BF_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT(v)  \
+	(((v) << 0) & BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT)
+
+#define HW_USBPHY_DEBUG1	(0x00000070)
+#define HW_USBPHY_DEBUG1_SET	(0x00000074)
+#define HW_USBPHY_DEBUG1_CLR	(0x00000078)
+#define HW_USBPHY_DEBUG1_TOG	(0x0000007c)
+
+#define BP_USBPHY_DEBUG1_RSVD1      15
+#define BM_USBPHY_DEBUG1_RSVD1 0xFFFF8000
+#define BF_USBPHY_DEBUG1_RSVD1(v) \
+	(((v) << 15) & BM_USBPHY_DEBUG1_RSVD1)
+#define BP_USBPHY_DEBUG1_ENTAILADJVD      13
+#define BM_USBPHY_DEBUG1_ENTAILADJVD 0x00006000
+#define BF_USBPHY_DEBUG1_ENTAILADJVD(v)  \
+	(((v) << 13) & BM_USBPHY_DEBUG1_ENTAILADJVD)
+#define BM_USBPHY_DEBUG1_ENTX2TX 0x00001000
+#define BP_USBPHY_DEBUG1_RSVD0      4
+#define BM_USBPHY_DEBUG1_RSVD0 0x00000FF0
+#define BF_USBPHY_DEBUG1_RSVD0(v)  \
+	(((v) << 4) & BM_USBPHY_DEBUG1_RSVD0)
+#define BP_USBPHY_DEBUG1_DBG_ADDRESS      0
+#define BM_USBPHY_DEBUG1_DBG_ADDRESS 0x0000000F
+#define BF_USBPHY_DEBUG1_DBG_ADDRESS(v)  \
+	(((v) << 0) & BM_USBPHY_DEBUG1_DBG_ADDRESS)
+
+#define HW_USBPHY_VERSION	(0x00000080)
+
+#define BP_USBPHY_VERSION_MAJOR      24
+#define BM_USBPHY_VERSION_MAJOR 0xFF000000
+#define BF_USBPHY_VERSION_MAJOR(v) \
+	(((v) << 24) & BM_USBPHY_VERSION_MAJOR)
+#define BP_USBPHY_VERSION_MINOR      16
+#define BM_USBPHY_VERSION_MINOR 0x00FF0000
+#define BF_USBPHY_VERSION_MINOR(v)  \
+	(((v) << 16) & BM_USBPHY_VERSION_MINOR)
+#define BP_USBPHY_VERSION_STEP      0
+#define BM_USBPHY_VERSION_STEP 0x0000FFFF
+#define BF_USBPHY_VERSION_STEP(v)  \
+	(((v) << 0) & BM_USBPHY_VERSION_STEP)
+
+#define HW_USBPHY_IP	(0x00000090)
+#define HW_USBPHY_IP_SET	(0x00000094)
+#define HW_USBPHY_IP_CLR	(0x00000098)
+#define HW_USBPHY_IP_TOG	(0x0000009c)
+
+#define BP_USBPHY_IP_RSVD1      25
+#define BM_USBPHY_IP_RSVD1 0xFE000000
+#define BF_USBPHY_IP_RSVD1(v) \
+	(((v) << 25) & BM_USBPHY_IP_RSVD1)
+#define BP_USBPHY_IP_DIV_SEL      23
+#define BM_USBPHY_IP_DIV_SEL 0x01800000
+#define BF_USBPHY_IP_DIV_SEL(v)  \
+	(((v) << 23) & BM_USBPHY_IP_DIV_SEL)
+#define BV_USBPHY_IP_DIV_SEL__DEFAULT   0x0
+#define BV_USBPHY_IP_DIV_SEL__LOWER     0x1
+#define BV_USBPHY_IP_DIV_SEL__LOWEST    0x2
+#define BV_USBPHY_IP_DIV_SEL__UNDEFINED 0x3
+#define BP_USBPHY_IP_LFR_SEL      21
+#define BM_USBPHY_IP_LFR_SEL 0x00600000
+#define BF_USBPHY_IP_LFR_SEL(v)  \
+	(((v) << 21) & BM_USBPHY_IP_LFR_SEL)
+#define BV_USBPHY_IP_LFR_SEL__DEFAULT   0x0
+#define BV_USBPHY_IP_LFR_SEL__TIMES_2   0x1
+#define BV_USBPHY_IP_LFR_SEL__TIMES_05  0x2
+#define BV_USBPHY_IP_LFR_SEL__UNDEFINED 0x3
+#define BP_USBPHY_IP_CP_SEL      19
+#define BM_USBPHY_IP_CP_SEL 0x00180000
+#define BF_USBPHY_IP_CP_SEL(v)  \
+	(((v) << 19) & BM_USBPHY_IP_CP_SEL)
+#define BV_USBPHY_IP_CP_SEL__DEFAULT   0x0
+#define BV_USBPHY_IP_CP_SEL__TIMES_2   0x1
+#define BV_USBPHY_IP_CP_SEL__TIMES_05  0x2
+#define BV_USBPHY_IP_CP_SEL__UNDEFINED 0x3
+#define BM_USBPHY_IP_TSTI_TX_DP 0x00040000
+#define BM_USBPHY_IP_TSTI_TX_DM 0x00020000
+#define BM_USBPHY_IP_ANALOG_TESTMODE 0x00010000
+#define BP_USBPHY_IP_RSVD0      3
+#define BM_USBPHY_IP_RSVD0 0x0000FFF8
+#define BF_USBPHY_IP_RSVD0(v)  \
+	(((v) << 3) & BM_USBPHY_IP_RSVD0)
+#define BM_USBPHY_IP_EN_USB_CLKS 0x00000004
+#define BM_USBPHY_IP_PLL_LOCKED 0x00000002
+#define BM_USBPHY_IP_PLL_POWER 0x00000001
+
+/* The register definition for usbphy which includes at usb core's register set
+ * (from USB_CORE_BASE + 0x800)
+ */
+#define USB_CTRL			USBOTHER_REG(0x00)	/* USB OTG Control register */
+#define USB_H1_CTRL			USBOTHER_REG(0x04)	/* USB H1 Control register */
+#define USB_H2_CTRL			USBOTHER_REG(0x08)	/* USB H2 Control register */
+#define USB_H3_CTRL			USBOTHER_REG(0x0c)	/* USB H3 Control register */
+#define USB_UH2_HSIC_CTRL		USBOTHER_REG(0x10)	/* USB Host2 HSIC Control Register */
+#define USB_UH3_HSIC_CTRL		USBOTHER_REG(0x14)	/* USB Host3 HSIC Control Register */
+#define USB_OTG_PHY_CTRL_0		USBOTHER_REG(0x18)	/* OTG UTMI PHY Control 0 Register */
+#define USB_H1_PHY_CTRL_0		USBOTHER_REG(0x1c)	/* OTG UTMI PHY Control 1 Register */
+#define USB_UH2_HSIC_DLL_CFG1		USBOTHER_REG(0x20)      /* USB Host2 HSIC DLL Configuration Register 1 */
+#define USB_UH2_HSIC_DLL_CFG2		USBOTHER_REG(0x24)      /* USB Host2 HSIC DLL Configuration Register 2 */
+#define USB_UH2_HSIC_DLL_CFG3		USBOTHER_REG(0x28)      /* USB Host2 HSIC DLL Configuration Register 3 */
+#define USB_UH3_HSIC_DLL_CFG1		USBOTHER_REG(0x30)      /* USB Host3 HSIC DLL Configuration Register 1 */
+#define USB_UH3_HSIC_DLL_CFG2		USBOTHER_REG(0x34)      /* USB Host3 HSIC DLL Configuration Register 2 */
+#define USB_UH3_HSIC_DLL_CFG3		USBOTHER_REG(0x38)      /* USB Host3 HSIC DLL Configuration Register 3 */
+
+/*
+ * register bits
+ */
+
+/* USBCTRL */
+#define UCTRL_OSIC_MASK		(3 << 29)	/* OTG  Serial Interface Config: */
+#define UCTRL_OSIC_DU6		(0 << 29)	/* Differential/unidirectional 6 wire */
+#define UCTRL_OSIC_DB4		(1 << 29)	/* Differential/bidirectional  4 wire */
+#define UCTRL_OSIC_SU6		(2 << 29)	/* single-ended/unidirectional 6 wire */
+#define UCTRL_OSIC_SB3		(3 << 29)	/* single-ended/bidirectional  3 wire */
+#define UCTRL_OUIE		(1 << 28)	/* OTG ULPI intr enable */
+#define UCTRL_OBPVAL_RXDP	(1 << 26)	/* OTG RxDp status in bypass mode */
+#define UCTRL_OBPVAL_RXDM	(1 << 25)	/* OTG RxDm status in bypass mode */
+#define UCTRL_OPM		(1 << 24)	/* OTG power mask */
+#define UCTRL_O_PWR_POL	(1 << 24)	/* OTG power pin polarity */
+#define UCTRL_H2WIR		(1 << 17)	/* HOST2 wakeup intr request received */
+#define UCTRL_H2SIC_MASK	(3 << 21)	/* HOST2 Serial Interface Config: */
+#define UCTRL_H2SIC_DU6		(0 << 21)	/* Differential/unidirectional 6 wire */
+#define UCTRL_H2SIC_DB4		(1 << 21)	/* Differential/bidirectional  4 wire */
+#define UCTRL_H2SIC_SU6		(2 << 21)	/* single-ended/unidirectional 6 wire */
+#define UCTRL_H2SIC_SB3		(3 << 21)	/* single-ended/bidirectional  3 wire */
+#define UCTRL_H2UIE		(1 << 8)	/* HOST2 ULPI intr enable */
+#define UCTRL_H2WIE		(1 << 7)	/* HOST2 wakeup intr enable */
+#define UCTRL_H2PP		0	/* Power Polarity for uh2 */
+#define UCTRL_H2PM		(1 << 4)	/* HOST2 power mask */
+#define UCTRL_H2OVBWK_EN	(1 << 6) /* OTG VBUS Wakeup Enable */
+#define UCTRL_H2OIDWK_EN	(1 << 5) /* OTG ID Wakeup Enable */
+
+#define UCTRL_H1WIR		(1 << 15)	/* HOST1 wakeup intr request received */
+#define UCTRL_H1SIC_MASK	(3 << 13)	/* HOST1 Serial Interface Config: */
+#define UCTRL_H1SIC_DU6		(0 << 13)	/* Differential/unidirectional 6 wire */
+#define UCTRL_H1SIC_DB4		(1 << 13)	/* Differential/bidirectional  4 wire */
+#define UCTRL_H1SIC_SU6		(2 << 13)	/* single-ended/unidirectional 6 wire */
+#define UCTRL_H1SIC_SB3		(3 << 13)	/* single-ended/bidirectional  3 wire */
+#define UCTRL_OLOCKD		(1 << 13)	/* otg lock disable */
+#define UCTRL_H2LOCKD		(1 << 12)	/* HOST2 lock disable */
+#define UCTRL_H1UIE		(1 << 12)	/* Host1 ULPI interrupt enable */
+
+#define UCTRL_PP                (1 << 11)       /* power polarity bit */
+#define UCTRL_H1WIE		(1 << 11)	/* HOST1 wakeup intr enable */
+#define UCTRL_H1BPVAL_RXDP	(1 << 10)	/* HOST1 RxDp status in bypass mode */
+#define UCTRL_XCSO              (1 << 10)       /* Xcvr Clock Select for OTG port */
+#define UCTRL_H1BPVAL_RXDM	(1 <<  9)	/* HOST1 RxDm status in bypass mode */
+#define UCTRL_XCSH2             (1 <<  9)       /* Xcvr Clock Select for Host port */
+#define UCTRL_H1PM		(1 <<  8)	/* HOST1 power mask */
+#define UCTRL_IP_PULIDP         (1 <<  8)       /* Ipp_Puimpel_Pullup_Dp */
+
+#define UCTRL_IP_PUE_UP         (1 <<  7)       /* ipp_pue_pullup_dp */
+#define UCTRL_IP_PUE_DOWN       (1 <<  6)       /* ipp_pue_pulldwn_dpdm */
+#define UCTRL_H2DT		(1 <<  5)	/* HOST2 TLL disabled */
+#define UCTRL_H1DT		(1 <<  4)	/* HOST1 TLL disabled */
+#define UCTRL_USBTE             (1 <<  4)       /* USBT Transceiver enable */
+#define UCTRL_OCPOL             (1 <<  3)       /* OverCurrent Polarity */
+#define UCTRL_OCE               (1 <<  2)       /* OverCurrent Enable */
+#define UCTRL_H2OCPOL		(1 <<  2)       /* OverCurrent Polarity of Host2 */
+#define UCTRL_H2OCS             (1 <<  1)       /* Host OverCurrent State */
+#define UCTRL_BPE		(1 <<  0)	/* bypass mode enable */
+#define UCTRL_OTD		(1 <<  0)	/* OTG TLL Disable */
+#define UCTRL_OOCS              (1 <<  0)       /* OTG OverCurrent State */
+
+/* OTG_MIRROR */
+#define OTGM_SESEND		(1 << 4)	/* B device session end */
+#define OTGM_VBUSVAL		(1 << 3)	/* Vbus valid */
+#define OTGM_BSESVLD		(1 << 2)	/* B session Valid */
+#define OTGM_ASESVLD		(1 << 1)	/* A session Valid */
+#define OTGM_IDIDG		(1 << 0)	/* OTG ID pin status */
+				/* 1=high: Operate as B-device */
+				/* 0=low : Operate as A-device */
+
+/* USB_PHY_CTRL_FUNC */
+/* PHY control0 Register Bit Masks */
+#define USB_UTMI_PHYCTRL_CONF2	(1 << 26)
+
+#define USB_UTMI_PHYCTRL_UTMI_ENABLE (1 << 24)
+#define USB_UTMI_PHYCTRL_CHGRDETEN (1 << 24)    /* Enable Charger Detector */
+#define USB_UTMI_PHYCTRL_CHGRDETON (1 << 23)    /* Charger Detector Power On Control */
+#define USB_UTMI_PHYCTRL_OC_POL	(1 << 9)	/* OTG Polarity of Overcurrent */
+#define USB_UTMI_PHYCTRL_OC_DIS	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define USB_UH1_OC_DIS	(1 << 5)		/* UH1 Disable Overcurrent Event */
+#define USB_UH1_OC_POL	(1 << 6)		/* UH1 Polarity of OC,Low active */
+/* USB_PHY_CTRL_FUNC2*/
+#define USB_UTMI_PHYCTRL2_PLLDIV_MASK		0x3
+#define USB_UTMI_PHYCTRL2_PLLDIV_SHIFT		0
+#define USB_UTMI_PHYCTRL2_HSDEVSEL_MASK		0x3
+#define USB_UTMI_PHYCTRL2_HSDEVSEL_SHIFT	19
+
+/* USB_CTRL_1 */
+#define USB_CTRL_UH1_EXT_CLK_EN			(1 << 25)
+#define USB_CTRL_UH2_EXT_CLK_EN			(1 << 26)
+#define USB_CTRL_UH2_CLK_FROM_ULPI_PHY  	(1 << 2)
+/* ULPIVIEW register bits */
+#define ULPIVW_OFF		(0x170)
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0=read  1=write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xFF	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xFF	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xFF	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+/* USB Clock on/off Control Register */
+#define OTG_AHBCLK_OFF          (0x1<<17)      /* 1: OFF */
+#define H1_AHBCLK_OFF           (0x1<<18)      /* 1: OFF */
+
+/* mx6q's register bit begins*/
+
+/* OTG CTRL - H3 CTRL */
+#define UCTRL_OWIR		(1 << 31)	/* OTG wakeup intr request received */
+/* bit 18 - bit 30 is reserved at mx6q */
+#define UCTRL_WKUP_VBUS_EN	(1 << 17)	/* OTG wake-up on VBUS change enable */
+#define UCTRL_WKUP_ID_EN	(1 << 16)	/* OTG wake-up on ID change enable */
+#define UCTRL_WKUP_SW		(1 << 15)	/* OTG Software Wake-up */
+#define UCTRL_WKUP_SW_EN	(1 << 14)	/* OTG Software Wake-up enable */
+#define UCTRL_UTMI_ON_CLOCK	(1 << 13)	/* Force OTG UTMI PHY clock output on even if suspend mode */
+#define UCTRL_SUSPENDM		(1 << 12)	/* Force OTG UTMI PHY Suspend */
+#define UCTRL_RESET		(1 << 11)	/* Force OTG UTMI PHY Reset */
+#define UCTRL_OWIE		(1 << 10)	/* OTG wakeup intr request received */
+#define UCTRL_PM		(1 << 9)	/* OTG Power Mask */
+#define UCTRL_OVER_CUR_POL	(1 << 8)	/* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS	(1 << 7)	/* Disable OTG Overcurrent Detection */
+/* bit 0 - bit 6 is reserved at mx6q */
+
+/* Host2/3 HSIC Ctrl */
+#define CLK_VLD		(1 << 31)	/* Indicating whether HSIC clock is valid */
+#define HSIC_EN		(1 << 12)	/* HSIC enable */
+#define HSIC_CLK_ON		(1 << 11)	/* Force HSIC module 480M clock on,
+						 * even when in Host is in suspend mode
+						 */
+/* OTG/HOST1 Phy Ctrl */
+#define PHY_UTMI_CLK_VLD	(1 << 31)	/* Indicating whether OTG UTMI PHY Clock Valida */
+
+#define NOP_XCVR		(0xffffffff)	/* Indicate it is no usb phy */
+#endif /* __ARCH_ARM___USBPHY_H */