Merge with ssh://fifi/home/wd/git/u-boot/master

8 files changed, 218 insertions, 67 deletions

diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h
index 4e19dc4..a4e9947 100644
--- a/include/asm-mips/au1x00.h
+++ b/include/asm-mips/au1x00.h
@@ -119,6 +119,11 @@ static __inline__ int au_ffs(int x)
 	return __ilog2(x & -x) + 1;
 }
 
+#define gpio_set(Value)      outl(Value, SYS_OUTPUTSET)
+#define gpio_clear(Value)    outl(Value, SYS_OUTPUTCLR)
+#define gpio_read()          inl(SYS_PINSTATERD)
+#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR)
+
 #endif /* !ASSEMBLY */
 
 #ifdef CONFIG_PM
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998..6b8759f 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,6 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module */
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */
 #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
 
 #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
@@ -83,7 +82,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
@@ -192,16 +191,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
@@ -218,7 +207,7 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
@@ -284,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -493,13 +475,9 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
 #endif
 
@@ -507,8 +485,7 @@
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 18197f2..da6946b 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -177,6 +177,13 @@
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
+/* PS/2 Keyboard */
+#define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
+#define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
+#define CONFIG_PS2SERIAL	2	/* .. on DUART2			*/
+#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_BOARD_EARLY_INIT_R	1
+
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
 #ifdef	CFG_HUSH_PARSER
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 46280f7..572a70f 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -108,7 +108,7 @@
 /* still about 20 kB free with this defined */
 #define CFG_LONGHELP
 
-#define CONFIG_BOOTDELAY      3
+#define CONFIG_BOOTDELAY      1
 
 #ifdef CONFIG_HARD_I2C
 #define CONFIG_COMMANDS		\
@@ -206,15 +206,6 @@ struct bd_info_ext {
 #error CONFIG_USE_IRQ not supported
 #endif
 
-#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
-#define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_AUTOBOOT_STOP_STR "R"	/* default password */
-
-#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
 		"addmtd;bootm\0" \
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
new file mode 100644
index 0000000..77d2d56
--- /dev/null
+++ b/include/configs/gth2.h
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2005
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the gth2 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
+#define CONFIG_GTH2		1
+#define CONFIG_AU1X00		1  /* alchemy series cpu */
+
+#define CONFIG_AU1000		1
+
+#define CONFIG_MISC_INIT_R      1
+
+#define CONFIG_ETHADDR		DE:AD:BE:EF:01:02    /* Ethernet address */
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds	*/
+
+#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
+
+#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
+
+#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
+
+#define CONFIG_BAUDRATE		115200
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 115200 }
+
+/* Only interrupt boot if space is pressed */
+/* If a long serial cable is connected but */
+/* other end is dead, garbage will be read */
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#define	CONFIG_BOOTARGS "panic=1"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"addmisc=setenv bootargs $(bootargs) "				\
+	        "ethaddr=$(ethaddr) \0"					\
+        "netboot=bootp;run addmisc;bootm\0"                             \
+                ""
+
+/* Boot from Compact flash partition 2 as default */
+#define CONFIG_BOOTCOMMAND	"ide reset;disk 0x81000000 0:2;run addmisc;bootm"
+
+#define CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
+   CFG_CMD_MII | CFG_CMD_LOADS  | CFG_CMD_LOADB | CFG_CMD_ELF | \
+   CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
+
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory      */
+#define	CFG_PROMPT		"GTH2 # "	/* Monitor Command Prompt    */
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args*/
+
+#define CFG_MALLOC_LEN		128*1024
+
+#define CFG_BOOTPARAMS_LEN	128*1024
+
+#define CFG_MHZ			500
+
+#define CFG_HZ                  (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+
+#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+
+#define	CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+
+#define CFG_MEMTEST_START	0x80100000
+#define CFG_MEMTEST_END		0x83000000
+
+#define CONFIG_HW_WATCHDOG      1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+
+#define PHYS_FLASH		0xbfc00000 /* Flash Bank #1 */
+
+/* The following #defines are needed to get flash environment right */
+#define	CFG_MONITOR_BASE	TEXT_BASE
+#define	CFG_MONITOR_LEN		(192 << 10)
+
+#define CFG_INIT_SP_OFFSET	0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CFG_FLASH_BASE		PHYS_FLASH
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define	CFG_ENV_IS_NOWHERE	1
+
+/* Address and size of Primary Environment Sector	*/
+#define CFG_ENV_ADDR		0xB0030000
+#define CFG_ENV_SIZE		0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS	2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_MEMSIZE_IN_BYTES
+
+/*---ATA PCMCIA ------------------------------------*/
+#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+
+#define CFG_PCMCIA_MEM_ADDR  0x20000000
+#define CFG_PCMCIA_IO_BASE   0x28000000
+#define CFG_PCMCIA_ATTR_BASE 0x30000000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+#define CONFIG_ATAPI 1
+#define CONFIG_MAC_PARTITION 1
+
+/* We run CF in "true ide" mode or a harddrive via pcmcia */
+#define CONFIG_IDE_PCMCIA 1
+
+/* We only support one slot for now */
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_ATA_IDE0_OFFSET	0
+
+#define CFG_ATA_BASE_ADDR       CFG_PCMCIA_IO_BASE
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET     0
+
+/* Offset for normal register accesses  */
+#define CFG_ATA_REG_OFFSET      0
+
+/* Offset for alternate registers       */
+#define CFG_ATA_ALT_OFFSET      0x0200
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_ICACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+
+#define GPIO_CACONFIG  (1<<0)
+#define GPIO_DPACONFIG (1<<6)
+#define GPIO_ERESET    (1<<11)
+#define GPIO_EEDQ      (1<<17)
+#define GPIO_WDI       (1<<18)
+#define GPIO_RJ1LY     (1<<22)
+#define GPIO_RJ1LG     (1<<23)
+#define GPIO_LEDCLK    (1<<29)
+#define GPIO_LEDD      (1<<30)
+#define GPIO_CPU_LED   (1<<31)
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 96cb6e4..9ebb51e 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -191,16 +191,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
@@ -217,7 +207,7 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
@@ -283,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -478,13 +461,9 @@
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
 #endif
 
@@ -492,8 +471,7 @@
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
+#if defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 85ee756..8f71acf 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -160,7 +160,6 @@
 				CFG_CMD_DATE			| \
 				CFG_CMD_DHCP			| \
 				CFG_CMD_FAT			| \
-				CFG_CMD_JFFS2			| \
 				CFG_CMD_NFS			| \
 				CFG_CMD_SNTP			| \
 				CFG_CMD_USB	)
@@ -174,7 +173,6 @@
 				CFG_CMD_DATE			| \
 				CFG_CMD_DHCP			| \
 				CFG_CMD_FAT			| \
-				CFG_CMD_JFFS2			| \
 				CFG_CMD_NFS			| \
 				CFG_CMD_SNTP			| \
 				CFG_CMD_USB	)
@@ -384,10 +382,10 @@
 #define MTDIDS_DEFAULT		"nor0=0"
 
 /* production flash layout */
-#define MTDPARTS_DEFAULT	"mtdparts=0:32k(Firmware1)ro,"		\
+#define MTDPARTS_DEFAULT	"mtdparts=0:16k(Firmware1)ro,"		\
 						"16k(Env1),"		\
 						"16k(Env2),"		\
-						"320k(Firmware2)ro,"	\
+						"336k(Firmware2)ro,"	\
 						"896k(Kernel),"		\
 						"5376k(Root-FS),"	\
 						"1408k(JFFS2),"		\
diff --git a/include/serial.h b/include/serial.h
index c8abb72..8c7b1c2 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -23,7 +23,7 @@ extern struct serial_device serial_scc_device;
 extern struct serial_device * default_serial_console (void);
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP)
+   || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
 #endif