* Patch by Yuli Barcohen, 16 Jun 2004:

  Remove obsolete AdderII port which was superseded by unified
  AdderII/Adder87x port

* Patch by Ladislav Michl, 16 Jun 2004:
  Fix gcc-3.3.3 warnings for smc91111.c

2 files changed, 2 insertions, 224 deletions

diff --git a/include/configs/Adder.h b/include/configs/Adder.h
index 11a82c9..13e6c35 100644
--- a/include/configs/Adder.h
+++ b/include/configs/Adder.h
@@ -126,6 +126,8 @@
 #define CFG_OR0_PRELIM		0xFF000774
 #define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V)
 
+#define	CFG_DIRECT_FLASH_TFTP
+
 /*-----------------------------------------------------------------------
  * Internal Memory Map Register
  */
diff --git a/include/configs/AdderII.h b/include/configs/AdderII.h
deleted file mode 100644
index 5e0bbe3..0000000
--- a/include/configs/AdderII.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/******************************************************************************
-* A collection of structures, addresses, and values associated with
-* the Motorola 850T AdderIIF board.  Copied from the FADS stuff.
-* Magnus Damm added defines for 8xxrom and extended bd_info.
-* Helmut Buchsbaum added bitvalues for BCSRx
-*
-* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
-*******************************************************************************
-* 2003-JUL: The AdderII is using the following physical memorymap:
-*******************************************************************************
-* FA200000 -> FA20FFFF : IMAP   internal in the cpu
-* FE000000 -> FE400000 : flash  connected to CS0, setup by 8xxrom
-* 00000000 -> 00800000 : sdram  setup by 8xxrom
-*******************************************************************************/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <mpc8xx_irq.h>
-
-#define	CONFIG_MPC860		1
-#define	CONFIG_MPC860T		1
-#define CONFIG_ADDERII		1
-
-/* CPU Clock speed */
-#define MPC8XX_FACT		12		/* Multilpy by 12 */
-#define MPC8XX_XIN		4000000		/* 4MHz */
-#define MPC8XX_HZ		( MPC8XX_FACT * MPC8XX_XIN )
-
-#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
-#define CONFIG_SDRAM_50MHZ      1
-
-
-/* Default Serial Console, baudrate */
-#define CONFIG_8xx_CONS_SMC1	1		/* Console is on SMC1 */
-#define CONFIG_BAUDRATE		38400
-#define CONFIG_LOADS_ECHO	1
-
-/* FEC Ethernet controller configurations */
-#define CONFIG_FEC_ETH		1
-#define CONFIG_NET_MULTI	1
-#define FEC_ENET		1
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT   	SIU_LEVEL3      /* FEC interrupt */
-
-/* Older kernels need clock in MHz newer in Hz */
-#define CONFIG_CLOCKS_IN_MHZ	1
-
-/* Monitor Functions */
-#define CONFIG_COMMANDS		( CFG_CMD_ENV	| \
-				  CFG_CMD_FLASH | \
-				  CFG_CMD_MEMORY| \
-				  CFG_CMD_NET   | \
-				  CFG_CMD_PING  | \
-				  CFG_CMD_SDRAM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-/* Configuration Settings */
-#define CFG_PROMPT		"=>"		/* Monitor Command Prompt */
-
-#if ( CONFIG_COMMANDS & CFG_CMD_KGDB )
-#define CFG_CBSIZE		1024		/* Console I/P buffer size */
-#else
-#define CFG_CBSIZE		256
-#endif
-
-#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-						/* Print buffer size */
-
-#define CFG_MAXARGS		16		/* Max number of cmd args */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot args buffer size */
-
-#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CFG_MEMTEST_START	0x00100000	/* Mem test works on  */
-#define CFG_MEMTEST_END		0x00800000	/* 1 ... 8MB in SDRAM */
-
-#define CFG_LOAD_ADDR		0x00100000
-#define CFG_HZ          	1000
-
-/******************************************************************************
-** Low level configuration settings.
-** ( adderss mappings, register init values, etc. )
-** You should know what you are doing if you make changes here.
-******************************************************************************/
-/* Start address  for the final memory configuration set up by startup code
-** Please note that CFG_SDRAM_BASE must start at 0
-*/
-
-#define CFG_SDRAM_BASE		0x00000000
-
-#define CFG_FLASH_BASE		0xFE000000
-#define CFG_FLASH_SIZE		(( uint ) ( 4 * 1024 * 1024 ))	/* 4MB */
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		( 256 << 10 )	/* 256 KByte */
-#define CFG_MALLOC_LEN		( 384 << 10 )	/* 384 KByte SDRAM rsvd */
-						/* malloc() usage 	*/
-/**
-** For booting Linux, the board info and command line data
-** have to be in the first 8 MB of memory, since this is
-** the maximum mapped by the Linux kernel during initialization.
-**/
-#define CFG_BOOTMAPSZ		( 8 << 20 )    /* Initial Memory map for Linux */
-
-/******************************************************************************
-** Flash Organization
-******************************************************************************/
-
-#define CFG_MAX_FLASH_BANKS	1		/* Max no of flash mem banks */
-#define CFG_MAX_FLASH_SECT	71		/* Max no of sec on 1 chip   */
-
-#define CFG_FLASH_ERASE_TOUT	120000		/* Erase flash timeout (ms)  */
-#define CFG_FLASH_WRITE_TOUT	500		/* Write flash timeout (ms)  */
-
-/******************************************************************************
-**	U-BOOT Environment variables in Flash
-******************************************************************************/
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_OFFSET		0x00040000
-#define CFG_ENV_SIZE		0x10000		/* 64KBytes env space */
-#define CFG_ENV_SECT_SIZE	0x10000
-
-/******************************************************************************
-**	Cache Configuration
-******************************************************************************/
-#define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs        */
-#if ( CONFIG_COMMANDS & CFG_CMD_KGDB )
-#define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value */
-#endif
-
-/******************************************************************************
-** Internal memory mapped register
-******************************************************************************/
-#define CFG_IMMR		0xFA200000
-#define CFG_IMMR_SIZE		(( uint) ( 62 * 1024 ))	/* 64 KByte res */
-
-/* Definitions for initial stack pointer and data area ( in DPRAM ) */
-
-#define CFG_INIT_RAM_ADDR	CFG_IMMR
-#define CFG_INIT_RAM_END	0x2F00		/* end of used area in DPRAM */
-#define CFG_GBL_DATA_SIZE	64
-#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-
-
-/* SIU Module Configuration Register */
-#define CFG_SIUMCR		( SIUMCR_AEME | SIUMCR_MLRC01 | SIUMCR_DBGC10 )
-
-/******************************************************************************
-**	SYPCR - System protection and control
-**	SYPCR - can be written only once after reset
-******************************************************************************/
-#if defined( CONFIG_WATCHDOG )
-#define CFG_SYPCR		( SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
-				  SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \
-				  SYPCR_SWP )
-#else
-#define CFG_SYPCR		( SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
-				  SYPCR_SWF | SYPCR_SWP )
-#endif
-
-/* TBSCR - Time Base Status and Control Register */
-#define CFG_TBSCR		( TBSCR_REFA | TBSCR_REFB | TBSCR_TBE )
-
-/* PISCR - Periodic Interrupt Status and Control */
-#define CFG_PISCR       	( PISCR_PS | PISCR_PITF )
-
-/* PLPRCR - PLL, Low-Power, and Reset Control Register */
-#define CFG_PLPRCR      	((( MPC8XX_FACT - 1 ) << PLPRCR_MF_SHIFT ) | \
-				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST )
-
-/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK       	SCCR_EBDF11
-#define CFG_SCCR		( SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
-				  SCCR_DFBRG00 | SCCR_DFNL000| SCCR_DFNH000 | \
-				  SCCR_DFLCD000 | SCCR_DFALCD00 )
-#define CFG_DER         	0
-
-/******************************************************************************
-** Because of the way the 860 starts up and assigns CS0 the
-** entire address space, we have to set the memory controller
-** differently.  Normally, you write the option register
-** first, and then enable the chip select by writing the
-** base register.  For CS0, you must write the base register
-** first, followed by the option register.
-******************************************************************************/
-/**
- ** Memory Controller Definitions
- ** BR0/1/2... and OR0/1/2...
-*/
-/* For AdderII BR0 FLASH */
-
-#define CFG_REMAP_OR_AM		0xFF800000		/* OR addr mask */
-#define CFG_PRELIM_OR_AM	0xFF800000		/* OR addr mask */
-
-/* Flash Timings: ACS = 11, TRLX = 1, CSNT = 0, SCY = 7 */
-#define CFG_OR_TIMING_FLASH 	( OR_ACS_DIV2 | OR_BI | OR_SCY_7_CLK | OR_TRLX )
-
-#define CFG_OR0_REMAP		( CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH )
-
-#define CFG_OR0_PRELIM		CFG_OR0_REMAP
-#define CFG_BR0_PRELIM		(( CFG_FLASH_BASE & BR_BA_MSK ) | \
-				   BR_PS_16 | BR_V )
-
-/* For AdderII BR1 SDRAM */
-
-#define CFG_PRELIM_OR1_AM 	0xFF800000
-#define CFG_OR1_REMAP		( CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_ACS_DIV2 )
-#define CFG_OR1_PRELIM  	( CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_ACS_DIV2 )
-#define CFG_BR1_PRELIM  	( CFG_SDRAM_BASE | BR_MS_UPMA | BR_V )
-
-
-/*******************************************************************************
-* Internal Definitions Boot Flags
-*******************************************************************************/
-#define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02            /* Software reboot                   */
-
-
-#endif
-/* __CONFIG_H */