Add support for BC3450 board

Signed-off-by: dzu@denx.de <dzu@denx.de>

1 files changed, 568 insertions, 0 deletions

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
new file mode 100644
index 0000000..a79de40
--- /dev/null
+++ b/include/configs/BC3450.h
@@ -0,0 +1,568 @@
+/*
+ * -- Version 1.1 --
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * (C) Copyright 2005
+ * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de.
+ *
+ * History:
+ *	1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU	    */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU)   */
+#define CONFIG_TQM5200		1	/* ... on a TQM5200 module	    */
+
+#define CONFIG_BC3450           1       /* ... on a BC3450 mainboard	    */
+#define CONFIG_BC3450_PS2	1       /*  + a PS/2 converter onboard	    */
+#define CONFIG_BC3450_IDE	1       /*  + IDE drives (Compact Flash)    */
+#define CONFIG_BC3450_USB	1	/*  + USB support		    */
+# define CONFIG_FAT		1	/*    + FAT support		    */
+# define CONFIG_EXT2		1	/*    + EXT2 support		    */
+#undef CONFIG_BC3450_BUZZER		/*  + Buzzer onboard		    */
+#undef CONFIG_BC3450_CAN		/*  + CAN transceiver		    */
+#undef CONFIG_BC3450_DS1340		/*  + a RTC DS1340 onboard	    */
+#undef CONFIG_BC3450_DS3231		/*  + a RTC DS3231 onboard      tbd */
+#undef CONFIG_BC3450_AC97		/*  + AC97 on PSC2,             tbd */
+#define CONFIG_BC3450_FP	1	/*  + enable FP O/P		    */
+#undef CONFIG_BC3450_CRT		/*  + enable CRT O/P (Debug only!)  */
+
+#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz     */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot		    */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps		*/
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * AT-PS/2 Multiplexer
+ */
+#ifdef CONFIG_BC3450_PS2
+# define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
+# define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
+# define CONFIG_PS2SERIAL	6		/* .. on PSC6		*/
+# define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+# define CONFIG_BOARD_EARLY_INIT_R
+#endif /* CONFIG_BC3450_PS2 */
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+# define CONFIG_PCI		1
+# define CONFIG_PCI_PNP		1
+/* #define CONFIG_PCI_SCAN_SHOW	1 */
+
+#define CONFIG_PCI_MEM_BUS	0x40000000
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x10000000
+
+#define CONFIG_PCI_IO_BUS	0x50000000
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x01000000
+
+#define CONFIG_NET_MULTI	1
+/*#define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100  */
+#define CONFIG_NS8382X		1
+
+#ifdef CONFIG_PCI
+# define ADD_PCI_CMD		CFG_CMD_PCI
+#else
+# define ADD_PCI_CMD		0
+#endif
+
+/*
+ * Video console
+ */
+# define CONFIG_VIDEO
+# define CONFIG_VIDEO_SM501
+# define CONFIG_VIDEO_SM501_32BPP
+# define CONFIG_CFB_CONSOLE
+# define CONFIG_VIDEO_LOGO
+# define CONFIG_VGA_AS_SINGLE_DEVICE
+# define CONFIG_CONSOLE_EXTRA_INFO	/* display Board/Device-Infos */
+# define CONFIG_VIDEO_SW_CURSOR
+# define CONFIG_SPLASH_SCREEN
+# define CFG_CONSOLE_IS_IN_ENV
+
+#ifdef CONFIG_VIDEO
+# define ADD_BMP_CMD		CFG_CMD_BMP
+#else
+# define ADD_BMP_CMD		0
+#endif
+
+/* 
+ * Partitions 
+ */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* 
+ * USB 
+ */
+#ifdef CONFIG_BC3450_USB
+# define CONFIG_USB_OHCI
+# define ADD_USB_CMD		CFG_CMD_USB
+# define CONFIG_USB_STORAGE
+#else /* !CONFIG_BC3450_USB */
+# define ADD_USB_CMD		0
+#endif /* CONFIG_BC3450_USB */
+
+/* 
+ * POST support 
+ */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+# define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+# define CFG_CMD_POST_DIAG 0
+#endif /* CONFIG_POST */
+
+/* 
+ * IDE 
+ */
+#ifdef CONFIG_BC3450_IDE
+# define ADD_IDE_CMD		CFG_CMD_IDE
+#else
+# define ADD_IDE_CMD		0
+#endif /* CONFIG_BC3450_IDE */
+
+/*
+ * Filesystem support
+ */
+#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB)
+#ifdef CONFIG_FAT
+# define ADD_FAT_CMD		CFG_CMD_FAT
+#else
+# define ADD_FAT_CMD		0
+#endif /* CONFIG_FAT */
+
+#ifdef CONFIG_EXT2
+# define ADD_EXT2_CMD		CFG_CMD_EXT2
+#else
+# define ADD_EXT2_CMD		0
+#endif /* CONFIG_EXT2 */
+#endif /* CONFIG_BC3450_IDE / _USB */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				ADD_BMP_CMD	| \
+				ADD_IDE_CMD	| \
+				ADD_FAT_CMD	| \
+				ADD_EXT2_CMD	| \
+				ADD_PCI_CMD	| \
+				ADD_USB_CMD	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_JFFS2	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_POST_DIAG | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SNTP	| \
+				CFG_CMD_BSP)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define	CONFIG_TIMESTAMP		/* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000)		/* Boot low */
+#   define CFG_LOWBOOT		1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo;"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"ipaddr=192.168.1.10\0"						\
+	"serverip=192.168.1.3\0"					\
+	"netmask=255.255.255.0\0"					\
+        "hostname=bc3450\0"                                             \
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+        "kernel_addr=fc0a0000\0"					\
+        "ramdisk_addr=fc1c0000\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+        "ideargs=setenv bootargs root=/dev/hda2 ro\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addcons=setenv bootargs $(bootargs) "				\
+		"console=ttyS0,$(baudrate) console=tty0\0"		\
+	"flash_self=run ramargs addip addcons;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0"	\
+	"net_nfs=tftp 200000 $(bootfile); "				\
+		"run nfsargs addip addcons; bootm\0"			\
+        "ide_nfs=run nfsargs addip addcons; "				\
+                "disk 200000 0:1; bootm\0"				\
+        "ide_ide=run ideargs addip addcons; "				\
+                "disk 200000 0:1; bootm\0" 				\
+	"usb_self=run usbload; run ramargs addip addcons; "		\
+		"bootm 200000 400000\0"					\
+	"usbload=usb reset; usb scan; usbboot 200000 0:1; "		\
+		"usbboot 400000 0:2\0"					\
+	"bootfile=uImage\0"						\
+	"load=tftp 200000 $(u-boot)\0"					\
+	"u-boot=u-boot.bin\0"						\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 $(filesize);"			\
+		"protect on FC000000 FC05FFFF\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet 
+ * hasn't been tested with a IPB Bus Clock of 66 MHz.
+ */
+#if defined(CFG_IPBSPEED_133)
+# define CFG_PCISPEED_66			/* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration for I²C EEPROM M24C32 
+ * M24C64 should work also. For other EEPROMs config should be verified.
+ * 
+ * The TQM5200 module may hold an EEPROM at address 0x50.
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x (TQM) */
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+
+/*
+ * RTC configuration
+ */
+#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231)
+# define CONFIG_RTC_M41T11	1
+# define CFG_I2C_RTC_ADDR	0x68
+#else
+# define CONFIG_RTC_MPC5200	1	/* use MPC5200 internal RTC */
+# define CONFIG_BOARD_EARLY_INIT_R
+#endif
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver if no module variant is spezified */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CFG_LOWBOOT */
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+#endif	/* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+/* Dynamic MTD partition support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM5200-0"
+#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"16m(big-fs),"		\
+						"8m(misc)"
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+# define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#else
+# define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#endif /*CONFIG_POST*/
+
+#define CFG_GBL_DATA_SIZE	128	/* Bytes reserved for initial data  */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(384 << 10) /* Reserve 384 kB for Monitor   */
+#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ *
+ * Define CONFIG_FEC10MBIT to force FEC at 10MBIT
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#undef CONFIG_FEC_10MBIT
+#define CONFIG_PHY_ADDR		0x00
+
+/*
+ * GPIO configuration on BC3450
+ *
+ *  PSC1:   UART1 (Service-UART)         [0x xxxxxxx4]
+ *  PSC2:   UART2                        [0x xxxxxx4x]
+ *    or:   AC/97 if CONFIG_BC3450_AC97  [0x xxxxxx2x]
+ *  PSC3:   USB2                         [0x xxxxx1xx]
+ *  USB:    UART4(ext.)/UART5(int.)      [0x xxxx2xxx]
+ *            (this has to match 
+ *            CONFIG_USB_CONFIG which is
+ *            used by usb_ohci.c to set 
+ *            the USB ports)
+ *  Eth:    10/100Mbit Ethernet          [0x xxx0xxxx]
+ *            (this is reset to '5' 
+ *            in FEC driver: fec.c)
+ *  PSC6:   UART6 (int. to PS/2 contr.)  [0x xx5xxxxx]
+ *  ATA/CS: ???                          [0x x1xxxxxx]
+ *          FIXME! UM Fig 2-10 suggests  [0x x0xxxxxx]
+ *  CS1:    Use Pin gpio_wkup_6 as second
+ *          SDRAM chip select (mem_cs1)
+ *  Timer:  CAN2 / SPI
+ *  I2C:    CAN1 / I²C2                  [0x bxxxxxxx]
+ */
+#ifdef CONFIG_BC3450_AC97
+# define CFG_GPS_PORT_CONFIG	0xb1502124
+#else /* PSC2=UART2 */
+# define CFG_GPS_PORT_CONFIG	0xb1502144
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory	    */
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size  */
+#define CFG_MAXARGS		16		/* max no of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Arg. Buffer Size    */
+
+#define CFG_ALT_MEMTEST				/* Enable an alternative,   */
+						/*  more extensive mem test */
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	    */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	    */
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address     */
+
+#define CFG_HZ			1000		/* dec freq: 1ms ticks	    */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+# define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+# define CFG_HID0_FINAL		HID0_ICE
+#else
+# define CFG_HID0_INIT		0
+# define CFG_HID0_FINAL		0
+#endif
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+# define CFG_BOOTCS_CFG		0x0008DF30	/* for pci_clk  = 66 MHz */
+#else
+# define CFG_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
+#endif
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+/* automatic configuration of chip selects */
+#ifdef CONFIG_TQM5200
+# define CONFIG_LAST_STAGE_INIT
+#endif /* CONFIG_TQM5200 */
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#ifdef CONFIG_TQM5200
+# define CFG_CS2_START		0xE5000000
+# define CFG_CS2_SIZE		0x100000	/* 1 MByte */
+# define CFG_CS2_CFG		0x0004D930
+#endif /* CONFIG_TQM5200 */
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#ifdef CONFIG_TQM5200
+# define SM501_FB_BASE		0xE0000000
+# define CFG_CS1_START		(SM501_FB_BASE)
+# define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
+# define CFG_CS1_CFG		0x8F48FF70
+# define SM501_MMIO_BASE	CFG_CS1_START + 0x03E00000
+#endif /* CONFIG_TQM5200 */
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for	*/
+						/*  flash and SM501	*/
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*
+ * USB stuff
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00002000      /* we're using Port 2	*/
+
+/*
+ * IDE/ATA stuff Supports IDE harddisk
+ */
+#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE     not supported	*/
+#undef	CONFIG_IDE_LED			/* LED for ide    not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide      supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE		4
+
+#endif /* __CONFIG_H */