Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.git

14 files changed, 3783 insertions, 758 deletions

diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h
index 908007c..79dcae4 100644
--- a/include/asm-ppc/e300.h
+++ b/include/asm-ppc/e300.h
@@ -12,6 +12,8 @@
 #define PVR_83xx 0x80830000
 #define PVR_8349_REV10 (PVR_83xx | 0x0010)
 #define PVR_8349_REV11 (PVR_83xx | 0x0011)
+#define PVR_8360_REV10 (PVR_83xx | 0x0020)
+#define PVR_8360_REV11 (PVR_83xx | 0x0020)
 
 /*
  * Hardware Implementation-Dependent Register 0 (HID0)
diff --git a/include/asm-ppc/fsl_i2c.h b/include/asm-ppc/fsl_i2c.h
index 76b1c43..4f71341 100644
--- a/include/asm-ppc/fsl_i2c.h
+++ b/include/asm-ppc/fsl_i2c.h
@@ -83,8 +83,4 @@ typedef struct fsl_i2c {
 	u8 res6[0xE8];
 } fsl_i2c_t;
 
-
-#define I2C_READ  1
-#define I2C_WRITE 0
-
 #endif	/* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index b73af96..8bc61b6 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -52,17 +52,29 @@ typedef	struct	global_data {
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
+#if defined (CONFIG_MPC8349)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 core_clk;
 	u32 usbmph_clk;
 	u32 usbdr_clk;
-	u32 i2c_clk;
+#endif /* CONFIG_MPC8349 */
+	u32 core_clk;
+	u32 i2c1_clk;
+	u32 i2c2_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_QE)
+	u32 qe_clk;
+	u32 brg_clk;
+	uint mp_alloc_base;
+	uint mp_alloc_top;
+#endif /* CONFIG_QE */
+#if defined (CONFIG_MPC8360)
+	u32  ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
 #endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h
deleted file mode 100644
index 1680d3a..0000000
--- a/include/asm-ppc/i2c.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Freescale I2C Controller
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * Copyright 2004 Freescale Semiconductor.
- * (C) Copyright 2003, Motorola, Inc.
- * author: Eran Liberty (liberty@freescale.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_I2C_H_
-#define _ASM_I2C_H_
-
-#include <asm/types.h>
-
-typedef struct i2c
-{
-    u8 adr;          /**< I2C slave address              */
-#define I2C_ADR	      0xFE
-#define I2C_ADR_SHIFT 1
-#define I2C_ADR_RES   ~(I2C_ADR)
-    u8 res0[3];
-    u8 fdr;          /**< I2C frequency divider register */
-#define IC2_FDR       0x3F
-#define IC2_FDR_SHIFT 0
-#define IC2_FDR_RES   ~(IC2_FDR)
-    u8 res1[3];
-    u8 cr;           /**< I2C control redister           */
-#define I2C_CR_MEN	  0x80
-#define I2C_CR_MIEN	  0x40
-#define I2C_CR_MSTA   0x20
-#define I2C_CR_MTX    0x10
-#define I2C_CR_TXAK   0x08
-#define I2C_CR_RSTA   0x04
-#define I2C_CR_BCST   0x01
-    u8 res2[3];
-    u8 sr;           /**< I2C status register            */
-#define I2C_SR_MCF    0x80
-#define I2C_SR_MAAS   0x40
-#define I2C_SR_MBB    0x20
-#define I2C_SR_MAL    0x10
-#define I2C_SR_BCSTM  0x08
-#define I2C_SR_SRW    0x04
-#define I2C_SR_MIF    0x02
-#define I2C_SR_RXAK   0x01
-    u8 res3[3];
-    u8 dr;           /**< I2C data register              */
-#define I2C_DR 0xFF
-#define I2C_DR_SHIFT 0
-#define I2C_DR_RES ~(I2C_DR)
-    u8 res4[3];
-    u8 dfsrr;        /**< I2C digital filter sampling rate register */
-#define I2C_DFSRR 0x3F
-#define I2C_DFSRR_SHIFT 0
-#define I2C_DFSRR_RES ~(I2C_DR)
-    u8 res5[3];
-    u8 res6[0xE8];
-} i2c_t;
-
-#ifndef CFG_HZ
-#error CFG_HZ is not defined in /include/configs/${BOARD}.h
-#endif
-#define I2C_TIMEOUT (CFG_HZ/4)
-
-#ifndef CFG_IMMRBAR
-#error CFG_IMMRBAR is not defined in /include/configs/${BOARD}.h
-#endif
-
-#ifndef CFG_I2C_OFFSET
-#error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h
-#endif
-
-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-/*
- * MPC8349 have two i2c bus
- */
-extern i2c_t * mpc8349_i2c;
-#define I2C mpc8349_i2c
-#else
-#define I2C ((i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET))
-#endif
-
-#define I2C_READ  1
-#define I2C_WRITE 0
-
-#endif	/* _ASM_I2C_H_ */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index c2b4c5c..2a76a05 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -1,75 +1,116 @@
 /*
- * MPC8349 Internal Memory Map
- * Copyright (c) 2004 Freescale Semiconductor.
- * Eran Liberty (liberty@freescale.com)
+ * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * MPC83xx Internal Memory Map
+ *
+ * History :
+ * 20060601: Daveliu (daveliu@freescale.com)
+ *           TanyaJiang (tanya.jiang@freescale.com)
+ *           Unified variable names for mpc83xx
+ * 2005    : Mandy Lavi (mandy.lavi@freescale.com)
+ *           support for mpc8360e
+ * 2004    : Eran Liberty (liberty@freescale.com)
+ *           Initialized for mpc8349
+ *           based on:
+ *           MPC8260 Internal Memory Map
+ *           Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *           MPC85xx Internal Memory Map
+ *           Copyright(c) 2002,2003 Motorola Inc.
+ *           Xianghua Xiao (x.xiao@motorola.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  *
- * based on:
- * - MPC8260 Internal Memory Map
- *   Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * - MPC85xx Internal Memory Map
- *   Copyright(c) 2002,2003 Motorola Inc.
- *   Xianghua Xiao (x.xiao@motorola.com)
  */
-#ifndef __IMMAP_8349__
-#define __IMMAP_8349__
+#ifndef __IMMAP_83xx__
+#define __IMMAP_83xx__
 
+#include <config.h>
 #include <asm/types.h>
-#include <asm/i2c.h>
+#include <asm/fsl_i2c.h>
 
 /*
  * Local Access Window.
  */
-typedef struct law8349 {
-	u32 bar; /* LBIU local access window base address register */
+typedef struct law83xx {
+	u32 bar;		/* LBIU local access window base address register */
 /* Identifies the 20 most-significant address bits of the base of local
  * access window n. The specified base address should be aligned to the
  * window size, as defined by LBLAWARn[SIZE].
  */
 #define LAWBAR_BAR         0xFFFFF000
 #define LAWBAR_RES	     ~(LAWBAR_BAR)
-	u32 ar; /* LBIU local access window attribute register */
-} law8349_t;
+	u32 ar;			/* LBIU local access window attribute register */
+} law83xx_t;
 
 /*
  * System configuration registers.
  */
-typedef struct sysconf8349 {
-	u32 immrbar; /* Internal memory map base address register */
+typedef struct sysconf83xx {
+	u32 immrbar;		/* Internal memory map base address register */
 	u8 res0[0x04];
-	u32 altcbar; /* Alternate configuration base address register */
+	u32 altcbar;		/* Alternate configuration base address register */
 /* Identifies the12 most significant address bits of an alternate base
  * address used for boot sequencer configuration accesses.
  */
 #define ALTCBAR_BASE_ADDR     0xFFF00000
-#define ALTCBAR_RES           ~(ALTCBAR_BASE_ADDR) /* Reserved. Write has no effect, read returns 0. */
+#define ALTCBAR_RES           ~(ALTCBAR_BASE_ADDR)	/* Reserved. Write has no effect, read returns 0. */
 	u8 res1[0x14];
-	law8349_t lblaw[4]; /* LBIU local access window */
+	law83xx_t lblaw[4];	/* LBIU local access window */
 	u8 res2[0x20];
-	law8349_t pcilaw[2]; /* PCI local access window */
+	law83xx_t pcilaw[2];	/* PCI local access window */
 	u8 res3[0x30];
-	law8349_t ddrlaw[2]; /* DDR local access window */
+	law83xx_t ddrlaw[2];	/* DDR local access window */
 	u8 res4[0x50];
-	u32 sgprl; /* System General Purpose Register Low */
-	u32 sgprh; /* System General Purpose Register High */
-	u32 spridr; /* System Part and Revision ID Register */
-#define SPRIDR_PARTID         0xFFFF0000 /* Part Identification. */
-#define SPRIDR_REVID          0x0000FFFF /* Revision Identification. */
+	u32 sgprl;		/* System General Purpose Register Low */
+	u32 sgprh;		/* System General Purpose Register High */
+	u32 spridr;		/* System Part and Revision ID Register */
+#define SPRIDR_PARTID         0xFFFF0000	/* Part Identification. */
+#define SPRIDR_REVID          0x0000FFFF	/* Revision Identification. */
 	u8 res5[0x04];
-	u32 spcr; /* System Priority Configuration Register */
-#define SPCR_PCIHPE   0x10000000 /* PCI Highest Priority Enable. */
-#define SPCR_PCIPR    0x03000000 /* PCI bridge system bus request priority. */
-#define SPCR_TBEN     0x00400000 /* E300 PowerPC core time base unit enable. */
-#define SPCR_COREPR   0x00300000 /* E300 PowerPC Core system bus request priority. */
-#define SPCR_TSEC1DP  0x00003000 /* TSEC1 data priority. */
-#define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
-#define SPCR_TSEC1EP  0x00000300 /* TSEC1 emergency priority. */
-#define SPCR_TSEC2DP  0x00000030 /* TSEC2 data priority. */
-#define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
-#define SPCR_TSEC2EP  0x00000003 /* TSEC2 emergency priority. */
+	u32 spcr;		/* System Priority Configuration Register */
+#define SPCR_PCIHPE   0x10000000	/* PCI Highest Priority Enable. */
+#define SPCR_PCIHPE_SHIFT	(31-3)
+#define SPCR_PCIPR    0x03000000	/* PCI bridge system bus request priority. */
+#define SPCR_PCIPR_SHIFT	(31-7)
+#define SPCR_OPT      0x00800000	/* Optimize */
+#define SPCR_TBEN     0x00400000	/* E300 PowerPC core time base unit enable. */
+#define SPCR_TBEN_SHIFT		(31-9)
+#define SPCR_COREPR   0x00300000	/* E300 PowerPC Core system bus request priority. */
+#define SPCR_COREPR_SHIFT	(31-11)
+#if defined (CONFIG_MPC8349)
+#define SPCR_TSEC1DP  0x00003000	/* TSEC1 data priority. */
+#define SPCR_TSEC1DP_SHIFT	(31-19)
+#define SPCR_TSEC1BDP 0x00000C00	/* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1BDP_SHIFT	(31-21)
+#define SPCR_TSEC1EP  0x00000300	/* TSEC1 emergency priority. */
+#define SPCR_TSEC1EP_SHIFT	(31-23)
+#define SPCR_TSEC2DP  0x00000030	/* TSEC2 data priority. */
+#define SPCR_TSEC2DP_SHIFT	(31-27)
+#define SPCR_TSEC2BDP 0x0000000C	/* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2BDP_SHIFT	(31-29)
+#define SPCR_TSEC2EP  0x00000003	/* TSEC2 emergency priority. */
+#define SPCR_TSEC2EP_SHIFT	(31-31)
 #define SPCR_RES      ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
 			| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
 			| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
-	u32 sicrl; /* System General Purpose Register Low */
+#elif defined (CONFIG_MPC8360)
+#define SPCR_RES      ~(SPCR_PCIHPE|SPCR_PCIPR|SPCR_OPT|SPCR_TBEN|SPCR_COREPR)
+#endif
+	u32 sicrl;		/* System General Purpose Register Low */
+#if defined (CONFIG_MPC8349)
 #define SICRL_LDP_A   0x80000000
 #define SICRL_USB1    0x40000000
 #define SICRL_USB0    0x20000000
@@ -91,8 +132,18 @@ typedef struct sysconf8349 {
 			| SICRL_GPIO1_D | SICRL_GPIO1_E | SICRL_GPIO1_F \
 			| SICRL_GPIO1_G | SICRL_GPIO1_H | SICRL_GPIO1_I \
 			| SICRL_GPIO1_J | SICRL_GPIO1_K | SICRL_GPIO1_L )
-	u32 sicrh; /* System General Purpose Register High */
+#elif defined (CONFIG_MPC8360)
+#define SICRL_LDP_A   0xC0000000
+#define SICRL_LCLK_1  0x10000000
+#define SICRL_LCLK_2  0x08000000
+#define SICRL_SRCID_A 0x03000000
+#define SICRL_IRQ_CKSTP_A 0x00C00000
+#define SICRL_RES     ~(SICRL_LDP_A | SICRL_LCLK_1 | SICRL_LCLK_2 | \
+			SICRL_SRCID_A | SICRL_IRQ_CKSTP_A)
+#endif
+	u32 sicrh;		/* System General Purpose Register High */
 #define SICRH_DDR     0x80000000
+#if defined (CONFIG_MPC8349)
 #define SICRH_TSEC1_A 0x10000000
 #define SICRH_TSEC1_B 0x08000000
 #define SICRH_TSEC1_C 0x04000000
@@ -117,7 +168,7 @@ typedef struct sysconf8349 {
 #define SICRH_GPIO2_H 0x00000060
 #define SICRH_TSOBI1  0x00000002
 #define SICRH_TSOBI2  0x00000001
-#define SICRh_RES     ~(  SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
+#define SICRH_RES     ~(  SICRH_DDR | SICRH_TSEC1_A | SICRH_TSEC1_B \
 			| SICRH_TSEC1_C | SICRH_TSEC1_D | SICRH_TSEC1_E \
 			| SICRH_TSEC1_F | SICRH_TSEC2_A | SICRH_TSEC2_B \
 			| SICRH_TSEC2_C | SICRH_TSEC2_D | SICRH_TSEC2_E \
@@ -126,466 +177,758 @@ typedef struct sysconf8349 {
 			| SICRH_GPIO2_D | SICRH_GPIO2_E | SICRH_GPIO2_F \
 			| SICRH_GPIO2_G | SICRH_GPIO2_H | SICRH_TSOBI1 \
 			| SICRH_TSOBI2)
+#elif defined (CONFIG_MPC8360)
+#define SICRH_SECONDARY_DDR 0x40000000
+#define SICRH_SDDROE   0x02000000	/* SDDRIOE bit from reset configuration word high. */
+#define SICRH_UC1EOBI  0x00000004	/* UCC1 Ethernet Output Buffer Impedance. */
+#define SICRH_UC2E1OBI 0x00000002	/* UCC2 Ethernet pin option 1 Output Buffer Impedance. */
+#define SICRH_UC2E2OBI 0x00000001	/* UCC2 Ethernet pin option 2 Output Buffer Impedance. */
+#define SICRH_RES     ~(SICRH_DDR | SICRH_SECONDARY_DDR | SICRH_SDDROE | \
+                        SICRH_UC2E1OBI | SICRH_UC2E2OBI | SICRH_UC2E2OBI)
+#endif
 	u8 res6[0xE4];
-} sysconf8349_t;
+} sysconf83xx_t;
 
 /*
  * Watch Dog Timer (WDT) Registers
  */
-typedef struct wdt8349 {
+typedef struct wdt83xx {
 	u8 res0[4];
-	u32 swcrr; /* System watchdog control register */
-	u32 swcnr; /* System watchdog count register */
+	u32 swcrr;		/* System watchdog control register */
+	u32 swcnr;		/* System watchdog count register */
 #define SWCNR_SWCN 0x0000FFFF Software Watchdog Count Field.
 #define SWCNR_RES  ~(SWCNR_SWCN)
 	u8 res1[2];
-	u16 swsrr; /* System watchdog service register */
+	u16 swsrr;		/* System watchdog service register */
+#define SWSRR_WS 0x0000FFFF	/* Software Watchdog Service Field. */
 	u8 res2[0xF0];
-} wdt8349_t;
+} wdt83xx_t;
 
 /*
  * RTC/PIT Module Registers
  */
-typedef struct rtclk8349 {
-	u32 cnr; /* control register */
-#define CNR_CLEN 0x00000080 /* Clock Enable Control Bit  */
-#define CNR_CLIN 0x00000040 /* Input Clock Control Bit  */
-#define CNR_AIM  0x00000002 /* Alarm Interrupt Mask Bit  */
-#define CNR_SIM  0x00000001 /* Second Interrupt Mask Bit  */
+typedef struct rtclk83xx {
+	u32 cnr;		/* control register */
+#define CNR_CLEN 0x00000080	/* Clock Enable Control Bit  */
+#define CNR_CLIN 0x00000040	/* Input Clock Control Bit  */
+#define CNR_AIM  0x00000002	/* Alarm Interrupt Mask Bit  */
+#define CNR_SIM  0x00000001	/* Second Interrupt Mask Bit  */
 #define CNR_RES  ~(CNR_CLEN | CNR_CLIN | CNR_AIM | CNR_SIM)
-	u32 ldr; /* load register */
-	u32 psr; /* prescale register */
-	u32 ctr; /* register */
-	u32 evr; /* event register */
-#define RTEVR_SIF  0x00000001 /* Second Interrupt Flag Bit  */
-#define RTEVR_AIF  0x00000002 /* Alarm Interrupt Flag Bit  */
-#define RTEVR_RES  ~(EVR_SIF | EVR_AIF)
-	u32 alr; /* alarm register */
+	u32 ldr;		/* load register */
+#define LDR_CLDV 0xFFFFFFFF	/* Contains the 32-bit value to be
+				 * loaded in a 32-bit RTC counter.*/
+	u32 psr;		/* prescale register */
+#define PSR_PRSC 0xFFFFFFFF	/*  RTC Prescaler bits. */
+	u32 ctr;		/* Counter value field register */
+#define CRT_CNTV 0xFFFFFFFF	/* RTC Counter value field. */
+	u32 evr;		/* event register */
+#define RTEVR_SIF  0x00000001	/* Second Interrupt Flag Bit  */
+#define RTEVR_AIF  0x00000002	/* Alarm Interrupt Flag Bit  */
+#define RTEVR_RES ~(RTEVR_SIF | RTEVR_AIF)
+#define PTEVR_PIF  0x00000001	/* Periodic interrupt flag bit. */
+#define PTEVR_RES ~(PTEVR_PIF)
+	u32 alr;		/* alarm register */
 	u8 res0[0xE8];
-} rtclk8349_t;
+} rtclk83xx_t;
 
 /*
  * Global timper module
  */
 
-typedef struct gtm8349 {
-	u8    cfr1; /* Timer1/2 Configuration  */
-#define CFR1_PCAS 0x80 /* Pair Cascade mode  */
-#define CFR1_BCM  0x40  /* Backward compatible mode  */
-#define CFR1_STP2 0x20 /* Stop timer  */
-#define CFR1_RST2 0x10 /* Reset timer  */
-#define CFR1_GM2  0x08 /* Gate mode for pin 2  */
-#define CFR1_GM1  0x04 /* Gate mode for pin 1  */
-#define CFR1_STP1 0x02 /* Stop timer  */
-#define CFR1_RST1 0x01 /* Reset timer  */
-	u8    res0[3];
-	u8    cfr2; /* Timer3/4 Configuration  */
-#define CFR2_PCAS 0x80 /* Pair Cascade mode  */
-#define CFR2_SCAS 0x40 /* Super Cascade mode  */
-#define CFR2_STP4 0x20 /* Stop timer  */
-#define CFR2_RST4 0x10 /* Reset timer  */
-#define CFR2_GM4  0x08 /* Gate mode for pin 4  */
-#define CFR2_GM3  0x04 /* Gate mode for pin 3  */
-#define CFR2_STP3 0x02 /* Stop timer  */
-#define CFR2_RST3 0x01 /* Reset timer  */
-	u8    res1[10];
-	u16   mdr1; /* Timer1 Mode Register  */
-#define MDR_SPS  0xff00 /* Secondary Prescaler value  */
-#define MDR_CE   0x00c0 /* Capture edge and enable interrupt  */
-#define MDR_OM   0x0020 /* Output mode  */
-#define MDR_ORI  0x0010 /* Output reference interrupt enable  */
-#define MDR_FRR  0x0008 /* Free run/restart  */
-#define MDR_ICLK 0x0006 /* Input clock source for the timer  */
-#define MDR_GE   0x0001 /* Gate enable  */
-	u16   mdr2; /* Timer2 Mode Register  */
-	u16   rfr1; /* Timer1 Reference Register  */
-	u16   rfr2; /* Timer2 Reference Register  */
-	u16   cpr1; /* Timer1 Capture Register  */
-	u16   cpr2; /* Timer2 Capture Register  */
-	u16   cnr1; /* Timer1 Counter Register  */
-	u16   cnr2; /* Timer2 Counter Register  */
-	u16   mdr3; /* Timer3 Mode Register  */
-	u16   mdr4; /* Timer4 Mode Register  */
-	u16   rfr3; /* Timer3 Reference Register  */
-	u16   rfr4; /* Timer4 Reference Register  */
-	u16   cpr3; /* Timer3 Capture Register  */
-	u16   cpr4; /* Timer4 Capture Register  */
-	u16   cnr3; /* Timer3 Counter Register  */
-	u16   cnr4; /* Timer4 Counter Register  */
-	u16   evr1; /* Timer1 Event Register  */
-	u16   evr2; /* Timer2 Event Register  */
-	u16   evr3; /* Timer3 Event Register  */
-	u16   evr4; /* Timer4 Event Register  */
-#define GTEVR_REF 0x0002 /* Output reference event  */
-#define GTEVR_CAP 0x0001 /* Counter Capture event   */
+typedef struct gtm83xx {
+	u8 cfr1;		/* Timer1/2 Configuration  */
+#define CFR1_PCAS 0x80		/* Pair Cascade mode  */
+#define CFR1_BCM  0x40		/* Backward compatible mode  */
+#define CFR1_STP2 0x20		/* Stop timer  */
+#define CFR1_RST2 0x10		/* Reset timer  */
+#define CFR1_GM2  0x08		/* Gate mode for pin 2  */
+#define CFR1_GM1  0x04		/* Gate mode for pin 1  */
+#define CFR1_STP1 0x02		/* Stop timer  */
+#define CFR1_RST1 0x01		/* Reset timer  */
+#define CFR1_RES ~(CFR1_PCAS | CFR1_STP2 | CFR1_RST2 | CFR1_GM2 |\
+		 CFR1_GM1 | CFR1_STP1 | CFR1_RST1)
+	u8 res0[3];
+	u8 cfr2;		/* Timer3/4 Configuration  */
+#define CFR2_PCAS 0x80		/* Pair Cascade mode  */
+#define CFR2_SCAS 0x40		/* Super Cascade mode  */
+#define CFR2_STP4 0x20		/* Stop timer  */
+#define CFR2_RST4 0x10		/* Reset timer  */
+#define CFR2_GM4  0x08		/* Gate mode for pin 4  */
+#define CFR2_GM3  0x04		/* Gate mode for pin 3  */
+#define CFR2_STP3 0x02		/* Stop timer  */
+#define CFR2_RST3 0x01		/* Reset timer  */
+	u8 res1[10];
+	u16 mdr1;		/* Timer1 Mode Register  */
+#define MDR_SPS  0xff00		/* Secondary Prescaler value  */
+#define MDR_CE   0x00c0		/* Capture edge and enable interrupt  */
+#define MDR_OM   0x0020		/* Output mode  */
+#define MDR_ORI  0x0010		/* Output reference interrupt enable  */
+#define MDR_FRR  0x0008		/* Free run/restart  */
+#define MDR_ICLK 0x0006		/* Input clock source for the timer  */
+#define MDR_GE   0x0001		/* Gate enable  */
+	u16 mdr2;		/* Timer2 Mode Register  */
+	u16 rfr1;		/* Timer1 Reference Register  */
+	u16 rfr2;		/* Timer2 Reference Register  */
+	u16 cpr1;		/* Timer1 Capture Register  */
+	u16 cpr2;		/* Timer2 Capture Register  */
+	u16 cnr1;		/* Timer1 Counter Register  */
+	u16 cnr2;		/* Timer2 Counter Register  */
+	u16 mdr3;		/* Timer3 Mode Register  */
+	u16 mdr4;		/* Timer4 Mode Register  */
+	u16 rfr3;		/* Timer3 Reference Register  */
+	u16 rfr4;		/* Timer4 Reference Register  */
+	u16 cpr3;		/* Timer3 Capture Register  */
+	u16 cpr4;		/* Timer4 Capture Register  */
+	u16 cnr3;		/* Timer3 Counter Register  */
+	u16 cnr4;		/* Timer4 Counter Register  */
+	u16 evr1;		/* Timer1 Event Register  */
+	u16 evr2;		/* Timer2 Event Register  */
+	u16 evr3;		/* Timer3 Event Register  */
+	u16 evr4;		/* Timer4 Event Register  */
+#define GTEVR_REF 0x0002	/* Output reference event  */
+#define GTEVR_CAP 0x0001	/* Counter Capture event   */
 #define GTEVR_RES ~(EVR_CAP|EVR_REF)
-	u16   psr1; /* Timer1 Prescaler Register  */
-	u16   psr2; /* Timer2 Prescaler Register  */
-	u16   psr3; /* Timer3 Prescaler Register  */
-	u16   psr4; /* Timer4 Prescaler Register  */
-	u8    res[0xC0];
-} gtm8349_t;
+	u16 psr1;		/* Timer1 Prescaler Register  */
+	u16 psr2;		/* Timer2 Prescaler Register  */
+	u16 psr3;		/* Timer3 Prescaler Register  */
+	u16 psr4;		/* Timer4 Prescaler Register  */
+#define GTPSR_PPS  0x00FF	/* Primary Prescaler Bits. */
+#define GTPSR_RES  ~(GTPSR_PPS)
+	u8 res[0xC0];
+} gtm83xx_t;
 
 /*
  * Integrated Programmable Interrupt Controller
  */
-typedef struct ipic8349 {
-	u32    sicfr; /*  System Global Interrupt Configuration Register (SICFR)  */
-#define SICFR_HPI  0x7f000000 /*  Highest Priority Interrupt  */
-#define SICFR_MPSB 0x00400000 /*  Mixed interrupts Priority Scheme for group B  */
-#define SICFR_MPSA 0x00200000 /*  Mixed interrupts Priority Scheme for group A  */
-#define SICFR_IPSD 0x00080000 /*  Internal interrupts Priority Scheme for group D  */
-#define SICFR_IPSA 0x00010000 /*  Internal interrupts Priority Scheme for group A  */
-#define SICFR_HPIT 0x00000300 /*  HPI priority position IPIC output interrupt Type  */
+typedef struct ipic83xx {
+	u32 sicfr;		/*  System Global Interrupt Configuration Register (SICFR)  */
+#define SICFR_HPI  0x7f000000	/*  Highest Priority Interrupt  */
+#define SICFR_MPSB 0x00400000	/*  Mixed interrupts Priority Scheme for group B  */
+#define SICFR_MPSA 0x00200000	/*  Mixed interrupts Priority Scheme for group A  */
+#define SICFR_IPSD 0x00080000	/*  Internal interrupts Priority Scheme for group D  */
+#define SICFR_IPSA 0x00010000	/*  Internal interrupts Priority Scheme for group A  */
+#define SICFR_HPIT 0x00000300	/*  HPI priority position IPIC output interrupt Type  */
 #define SICFR_RES ~(SICFR_HPI|SICFR_MPSB|SICFR_MPSA|SICFR_IPSD|SICFR_IPSA|SICFR_HPIT)
-	u32    sivcr; /*  System Global Interrupt Vector Register (SIVCR)  */
-#define SICVR_IVECX 0xfc000000 /*  Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation)  */
-#define SICVR_IVEC  0x0000007f /*  Interrupt vector  */
+	u32 sivcr;		/*  System Global Interrupt Vector Register (SIVCR)  */
+#define SICVR_IVECX 0xfc000000	/*  Interrupt vector (for CE compatibility purpose only not used in 8349 IPIC implementation)  */
+#define SICVR_IVEC  0x0000007f	/*  Interrupt vector  */
 #define SICVR_RES ~(SICVR_IVECX|SICVR_IVEC)
-	u32    sipnr_h; /*  System Internal Interrupt Pending Register - High (SIPNR_H)  */
-#define SIIH_TSEC1TX 0x80000000 /*  TSEC1 Tx interrupt  */
-#define SIIH_TSEC1RX 0x40000000 /*  TSEC1 Rx interrupt  */
-#define SIIH_TSEC1ER 0x20000000 /*  TSEC1 Eror interrupt  */
-#define SIIH_TSEC2TX 0x10000000 /*  TSEC2 Tx interrupt  */
-#define SIIH_TSEC2RX 0x08000000 /*  TSEC2 Rx interrupt  */
-#define SIIH_TSEC2ER 0x04000000 /*  TSEC2 Eror interrupt  */
-#define SIIH_USB2DR  0x02000000 /*  USB2 DR interrupt  */
-#define SIIH_USB2MPH 0x01000000 /*  USB2 MPH interrupt  */
-#define SIIH_UART1   0x00000080 /*  UART1 interrupt  */
-#define SIIH_UART2   0x00000040 /*  UART2 interrupt  */
-#define SIIH_SEC     0x00000020 /*  SEC interrupt  */
-#define SIIH_I2C1    0x00000004 /*  I2C1 interrupt  */
-#define SIIH_I2C2    0x00000002 /*  I2C1 interrupt  */
-#define SIIH_SPI     0x00000001 /*  SPI interrupt  */
+	u32 sipnr_h;		/*  System Internal Interrupt Pending Register - High (SIPNR_H)  */
+#if defined (CONFIG_MPC8349)
+#define SIIH_TSEC1TX 0x80000000	/*  TSEC1 Tx interrupt  */
+#define SIIH_TSEC1RX 0x40000000	/*  TSEC1 Rx interrupt  */
+#define SIIH_TSEC1ER 0x20000000	/*  TSEC1 Eror interrupt  */
+#define SIIH_TSEC2TX 0x10000000	/*  TSEC2 Tx interrupt  */
+#define SIIH_TSEC2RX 0x08000000	/*  TSEC2 Rx interrupt  */
+#define SIIH_TSEC2ER 0x04000000	/*  TSEC2 Eror interrupt  */
+#define SIIH_USB2DR  0x02000000	/*  USB2 DR interrupt  */
+#define SIIH_USB2MPH 0x01000000	/*  USB2 MPH interrupt  */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIH_H_QE_H   0x80000000	/*  QE high interrupt */
+#define SIIH_H_QE_L   0x40000000	/*  QE low interrupt */
+#endif
+#define SIIH_UART1   0x00000080	/*  UART1 interrupt  */
+#define SIIH_UART2   0x00000040	/*  UART2 interrupt  */
+#define SIIH_SEC     0x00000020	/*  SEC interrupt  */
+#define SIIH_I2C1    0x00000004	/*  I2C1 interrupt  */
+#define SIIH_I2C2    0x00000002	/*  I2C2 interrupt  */
+#if defined (CONFIG_MPC8349)
+#define SIIH_SPI     0x00000001	/*  SPI interrupt  */
 #define SIIH_RES	~(SIIH_TSEC1TX | SIIH_TSEC1RX | SIIH_TSEC1ER \
 			| SIIH_TSEC2TX | SIIH_TSEC2RX | SIIH_TSEC2ER \
 			| SIIH_USB2DR | SIIH_USB2MPH | SIIH_UART1 \
 			| SIIH_UART2 | SIIH_SEC | SIIH_I2C1 \
 			| SIIH_I2C2 | SIIH_SPI)
-	u32    sipnr_l; /*  System Internal Interrupt Pending Register - Low (SIPNR_L)  */
-#define SIIL_RTCS  0x80000000 /*  RTC SECOND interrupt  */
-#define SIIL_PIT   0x40000000 /*  PIT interrupt  */
-#define SIIL_PCI1  0x20000000 /*  PCI1 interrupt  */
-#define SIIL_PCI2  0x10000000 /*  PCI2 interrupt  */
-#define SIIL_RTCA  0x08000000 /*  RTC ALARM interrupt  */
-#define SIIL_MU    0x04000000 /*  Message Unit interrupt  */
-#define SIIL_SBA   0x02000000 /*  System Bus Arbiter interrupt  */
-#define SIIL_DMA   0x01000000 /*  DMA interrupt  */
-#define SIIL_GTM4  0x00800000 /*  GTM4 interrupt  */
-#define SIIL_GTM8  0x00400000 /*  GTM8 interrupt  */
-#define SIIL_GPIO1 0x00200000 /*  GPIO1 interrupt  */
-#define SIIL_GPIO2 0x00100000 /*  GPIO2 interrupt  */
-#define SIIL_DDR   0x00080000 /*  DDR interrupt  */
-#define SIIL_LBC   0x00040000 /*  LBC interrupt  */
-#define SIIL_GTM2  0x00020000 /*  GTM2 interrupt  */
-#define SIIL_GTM6  0x00010000 /*  GTM6 interrupt  */
-#define SIIL_PMC   0x00008000 /*  PMC interrupt  */
-#define SIIL_GTM3  0x00000800 /*  GTM3 interrupt  */
-#define SIIL_GTM7  0x00000400 /*  GTM7 interrupt  */
-#define SIIL_GTM1  0x00000020 /*  GTM1 interrupt  */
-#define SIIL_GTM5  0x00000010 /*  GTM5 interrupt  */
-#define SIIL_DPTC  0x00000001 /*  DPTC interrupt (!!! Invisible for user !!!)  */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIH_RES       ~(SIIH_H_QE_H | SIIH_H_QE_L | SIIH_H_UART1 | \
+			SIIH_H_UART2| SIIH_H_SEC  | SIIH_H_I2C1 |SIIH_H_I2C2)
+#endif
+	u32 sipnr_l;		/*  System Internal Interrupt Pending Register - Low (SIPNR_L)  */
+#define SIIL_RTCS  0x80000000	/*  RTC SECOND interrupt  */
+#define SIIL_PIT   0x40000000	/*  PIT interrupt  */
+#define SIIL_PCI1  0x20000000	/*  PCI1 interrupt  */
+#if defined (CONFIG_MPC8349)
+#define SIIL_PCI2  0x10000000	/*  PCI2 interrupt  */
+#endif
+#define SIIL_RTCA  0x08000000	/*  RTC ALARM interrupt  */
+#define SIIL_MU    0x04000000	/*  Message Unit interrupt  */
+#define SIIL_SBA   0x02000000	/*  System Bus Arbiter interrupt  */
+#define SIIL_DMA   0x01000000	/*  DMA interrupt  */
+#define SIIL_GTM4  0x00800000	/*  GTM4 interrupt  */
+#define SIIL_GTM8  0x00400000	/*  GTM8 interrupt  */
+#if defined (CONFIG_MPC8349)
+#define SIIL_GPIO1 0x00200000	/*  GPIO1 interrupt  */
+#define SIIL_GPIO2 0x00100000	/*  GPIO2 interrupt  */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIL_QEP   0x00200000	/*  QE ports interrupt  */
+#define SIIL_SDDR  0x00100000	/*  SDDR interrupt  */
+#endif
+#define SIIL_DDR   0x00080000	/*  DDR interrupt  */
+#define SIIL_LBC   0x00040000	/*  LBC interrupt  */
+#define SIIL_GTM2  0x00020000	/*  GTM2 interrupt  */
+#define SIIL_GTM6  0x00010000	/*  GTM6 interrupt  */
+#define SIIL_PMC   0x00008000	/*  PMC interrupt  */
+#define SIIL_GTM3  0x00000800	/*  GTM3 interrupt  */
+#define SIIL_GTM7  0x00000400	/*  GTM7 interrupt  */
+#define SIIL_GTM1  0x00000020	/*  GTM1 interrupt  */
+#define SIIL_GTM5  0x00000010	/*  GTM5 interrupt  */
+#define SIIL_DPTC  0x00000001	/*  DPTC interrupt (!!! Invisible for user !!!)  */
+#if defined (CONFIG_MPC8349)
 #define SIIL_RES	~(SIIL_RTCS | SIIL_PIT | SIIL_PCI1 | SIIL_PCI2 \
 			| SIIL_RTCA | SIIL_MU | SIIL_SBA | SIIL_DMA \
 			| SIIL_GTM4 | SIIL_GTM8 | SIIL_GPIO1 | SIIL_GPIO2 \
 			| SIIL_DDR | SIIL_LBC | SIIL_GTM2 | SIIL_GTM6 \
 			| SIIL_PMC |SIIL_GTM3 | SIIL_GTM7 | SIIL_GTM1 \
 			| SIIL_GTM5 |SIIL_DPTC )
-	u32    siprr_a; /*  System Internal Interrupt Group A Priority Register (PRR)  */
-	u8     res0[8];
-	u32    siprr_d; /*  System Internal Interrupt Group D Priority Register (PRR)  */
-	u32    simsr_h; /*  System Internal Interrupt Mask Register - High (SIIH)  */
-	u32    simsr_l; /*  System Internal Interrupt Mask Register - Low (SIIL)  */
-	u8     res1[4];
-	u32    sepnr;   /*  System External Interrupt Pending Register (SEI)  */
-	u32    smprr_a; /*  System Mixed Interrupt Group A Priority Register (PRR)  */
-	u32    smprr_b; /*  System Mixed Interrupt Group B Priority Register (PRR)  */
-#define PRR_0 0xe0000000 /* Priority Register, Position 0 programming */
-#define PRR_1 0x1c000000 /* Priority Register, Position 1 programming */
-#define PRR_2 0x03800000 /* Priority Register, Position 2 programming */
-#define PRR_3 0x00700000 /* Priority Register, Position 3 programming */
-#define PRR_4 0x0000e000 /* Priority Register, Position 4 programming */
-#define PRR_5 0x00001c00 /* Priority Register, Position 5 programming */
-#define PRR_6 0x00000380 /* Priority Register, Position 6 programming */
-#define PRR_7 0x00000070 /* Priority Register, Position 7 programming */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SIIL_RES	~(SIIL_RTCS  |SIIL_PIT  |SIIL_PCI1 |SIIL_RTCALR \
+			|SIIL_MU |SIIL_SBA  |SIIL_DMA  |SIIL_GTM4 |SIIL_GTM8 \
+			|SIIL_QEP | SIIL_SDDR| SIIL_DDR  |SIIL_LBC  |SIIL_GTM2 \
+			|SIIL_GTM6 |SIIL_PMC  |SIIL_GTM3 |SIIL_GTM7 |SIIL_GTM1 \
+			|SIIL_GTM5 )
+#endif
+	u32 siprr_a;		/*  System Internal Interrupt Group A Priority Register (PRR)  */
+	u8 res0[8];
+	u32 siprr_d;		/*  System Internal Interrupt Group D Priority Register (PRR)  */
+	u32 simsr_h;		/*  System Internal Interrupt Mask Register - High (SIIH)  */
+	u32 simsr_l;		/*  System Internal Interrupt Mask Register - Low (SIIL)  */
+	u8 res1[4];
+	u32 sepnr;		/*  System External Interrupt Pending Register (SEI)  */
+	u32 smprr_a;		/*  System Mixed Interrupt Group A Priority Register (PRR)  */
+	u32 smprr_b;		/*  System Mixed Interrupt Group B Priority Register (PRR)  */
+#define PRR_0 0xe0000000	/* Priority Register, Position 0 programming */
+#define PRR_1 0x1c000000	/* Priority Register, Position 1 programming */
+#define PRR_2 0x03800000	/* Priority Register, Position 2 programming */
+#define PRR_3 0x00700000	/* Priority Register, Position 3 programming */
+#define PRR_4 0x0000e000	/* Priority Register, Position 4 programming */
+#define PRR_5 0x00001c00	/* Priority Register, Position 5 programming */
+#define PRR_6 0x00000380	/* Priority Register, Position 6 programming */
+#define PRR_7 0x00000070	/* Priority Register, Position 7 programming */
 #define PRR_RES ~(PRR_0|PRR_1|PRR_2|PRR_3|PRR_4|PRR_5|PRR_6|PRR_7)
-	u32    semsr; /*  System External Interrupt Mask Register (SEI)  */
-#define SEI_IRQ0  0x80000000 /*  IRQ0 external interrupt  */
-#define SEI_IRQ1  0x40000000 /*  IRQ1 external interrupt  */
-#define SEI_IRQ2  0x20000000 /*  IRQ2 external interrupt  */
-#define SEI_IRQ3  0x10000000 /*  IRQ3 external interrupt  */
-#define SEI_IRQ4  0x08000000 /*  IRQ4 external interrupt  */
-#define SEI_IRQ5  0x04000000 /*  IRQ5 external interrupt  */
-#define SEI_IRQ6  0x02000000 /*  IRQ6 external interrupt  */
-#define SEI_IRQ7  0x01000000 /*  IRQ7 external interrupt  */
-#define SEI_SIRQ0 0x00008000 /*  SIRQ0 external interrupt  */
+	u32 semsr;		/*  System External Interrupt Mask Register (SEI)  */
+#define SEI_IRQ0  0x80000000	/*  IRQ0 external interrupt  */
+#define SEI_IRQ1  0x40000000	/*  IRQ1 external interrupt  */
+#define SEI_IRQ2  0x20000000	/*  IRQ2 external interrupt  */
+#define SEI_IRQ3  0x10000000	/*  IRQ3 external interrupt  */
+#define SEI_IRQ4  0x08000000	/*  IRQ4 external interrupt  */
+#define SEI_IRQ5  0x04000000	/*  IRQ5 external interrupt  */
+#define SEI_IRQ6  0x02000000	/*  IRQ6 external interrupt  */
+#define SEI_IRQ7  0x01000000	/*  IRQ7 external interrupt  */
+#define SEI_SIRQ0 0x00008000	/*  SIRQ0 external interrupt  */
 #define SEI_RES		~( SEI_IRQ0 | SEI_IRQ1 | SEI_IRQ2 | SEI_IRQ3 \
 			| SEI_IRQ4 | SEI_IRQ5 | SEI_IRQ6 | SEI_IRQ7 \
 			| SEI_SIRQ0)
-	u32    secnr; /*  System External Interrupt Control Register (SECNR) */
-#define SECNR_MIXB0T 0xc0000000 /*  MIXB0 priority position IPIC output interrupt type  */
-#define SECNR_MIXB1T 0x30000000 /*  MIXB1 priority position IPIC output interrupt type  */
-#define SECNR_MIXA0T 0x00c00000 /*  MIXA0 priority position IPIC output interrupt type  */
-#define SECNR_SYSA1T 0x00300000 /*  MIXA1 priority position IPIC output interrupt type  */
-#define SECNR_EDI0   0x00008000 /*  IRQ0 external interrupt edge/level detect  */
-#define SECNR_EDI1   0x00004000 /*  IRQ1 external interrupt edge/level detect  */
-#define SECNR_EDI2   0x00002000 /*  IRQ2 external interrupt edge/level detect  */
-#define SECNR_EDI3   0x00001000 /*  IRQ3 external interrupt edge/level detect  */
-#define SECNR_EDI4   0x00000800 /*  IRQ4 external interrupt edge/level detect  */
-#define SECNR_EDI5   0x00000400 /*  IRQ5 external interrupt edge/level detect  */
-#define SECNR_EDI6   0x00000200 /*  IRQ6 external interrupt edge/level detect  */
-#define SECNR_EDI7   0x00000100 /*  IRQ7 external interrupt edge/level detect  */
+	u32 secnr;		/*  System External Interrupt Control Register (SECNR) */
+#define SECNR_MIXB0T 0xc0000000	/*  MIXB0 priority position IPIC output interrupt type  */
+#define SECNR_MIXB1T 0x30000000	/*  MIXB1 priority position IPIC output interrupt type  */
+#define SECNR_MIXA0T 0x00c00000	/*  MIXA0 priority position IPIC output interrupt type  */
+#define SECNR_SYSA1T 0x00300000	/*  MIXA1 priority position IPIC output interrupt type  */
+#define SECNR_EDI0   0x00008000	/*  IRQ0 external interrupt edge/level detect  */
+#define SECNR_EDI1   0x00004000	/*  IRQ1 external interrupt edge/level detect  */
+#define SECNR_EDI2   0x00002000	/*  IRQ2 external interrupt edge/level detect  */
+#define SECNR_EDI3   0x00001000	/*  IRQ3 external interrupt edge/level detect  */
+#define SECNR_EDI4   0x00000800	/*  IRQ4 external interrupt edge/level detect  */
+#define SECNR_EDI5   0x00000400	/*  IRQ5 external interrupt edge/level detect  */
+#define SECNR_EDI6   0x00000200	/*  IRQ6 external interrupt edge/level detect  */
+#define SECNR_EDI7   0x00000100	/*  IRQ7 external interrupt edge/level detect  */
 #define SECNR_RES	~( SECNR_MIXB0T | SECNR_MIXB1T | SECNR_MIXA0T \
 			| SECNR_SYSA1T | SECNR_EDI0 | SECNR_EDI1 \
 			| SECNR_EDI2 | SECNR_EDI3 | SECNR_EDI4 \
 			| SECNR_EDI5 | SECNR_EDI6 | SECNR_EDI7)
-	u32   sersr; /*  System Error Status Register (SERR)  */
-	u32   sermr; /*  System Error Mask Register (SERR)  */
-#define SERR_IRQ0 0x80000000 /*  IRQ0 MCP request  */
-#define SERR_WDT  0x40000000 /*  WDT MCP request  */
-#define SERR_SBA  0x20000000 /*  SBA MCP request  */
-#define SERR_DDR  0x10000000 /*  DDR MCP request  */
-#define SERR_LBC  0x08000000 /*  LBC MCP request  */
-#define SERR_PCI1 0x04000000 /*  PCI1 MCP request  */
-#define SERR_PCI2 0x02000000 /*  PCI2 MCP request  */
-#define SERR_MU   0x01000000 /*  MU MCP request  */
-#define SERR_RNC  0x00010000 /*  MU MCP request (!!! Non-visible for users !!!)  */
+	u32 sersr;		/*  System Error Status Register (SERR)  */
+	u32 sermr;		/*  System Error Mask Register (SERR)  */
+#define SERR_IRQ0 0x80000000	/*  IRQ0 MCP request  */
+#define SERR_WDT  0x40000000	/*  WDT MCP request  */
+#define SERR_SBA  0x20000000	/*  SBA MCP request  */
+#if defined (CONFIG_MPC8349)
+#define SERR_DDR  0x10000000	/*  DDR MCP request  */
+#define SERR_LBC  0x08000000	/*  LBC MCP request  */
+#define SERR_PCI1 0x04000000	/*  PCI1 MCP request  */
+#define SERR_PCI2 0x02000000	/*  PCI2 MCP request  */
+#endif
+#if defined (CONFIG_MPC8360)
+#define SERR_CIEE 0x10000000	/*  CIEE MCP request  */
+#define SERR_CMEE 0x08000000	/*  CMEEMCP request  */
+#define SERR_PCI  0x04000000	/*  PCI MCP request  */
+#endif
+#define SERR_MU   0x01000000	/*  MU MCP request  */
+#define SERR_RNC  0x00010000	/*  MU MCP request (!!! Non-visible for users !!!)  */
+#if defined (CONFIG_MPC8349)
 #define SERR_RES	~( SERR_IRQ0 | SERR_WDT | SERR_SBA | SERR_DDR \
 			|SERR_LBC | SERR_PCI1 | SERR_PCI2 | SERR_MU \
 			|SERR_RNC )
-	u32    sercr; /*  System Error Control Register  (SERCR)  */
-#define SERCR_MCPR 0x00000001 /*  MCP Route  */
+#elif defined (CONFIG_MPC8360)
+#define SERR_RES 	~( SERR_IRQ0|SERR_WDT |SERR_SBA |SERR_CIEE\
+                   	|SERR_CMEE|SERR_PCI|SERR_MU)
+#endif
+	u32 sercr;		/*  System Error Control Register  (SERCR)  */
+#define SERCR_MCPR 0x00000001	/*  MCP Route  */
 #define SERCR_RES ~(SERCR_MCPR)
-	u8    res2[4];
-	u32   sifcr_h; /*  System Internal Interrupt Force Register - High (SIIH)  */
-	u32   sifcr_l; /*  System Internal Interrupt Force Register - Low (SIIL)  */
-	u32   sefcr;   /*  System External Interrupt Force Register (SEI)  */
-	u32   serfr;   /*  System Error Force Register (SERR)  */
-	u8    res3[0xA0];
-} ipic8349_t;
+	u8 res2[4];
+	u32 sifcr_h;		/*  System Internal Interrupt Force Register - High (SIIH)  */
+	u32 sifcr_l;		/*  System Internal Interrupt Force Register - Low (SIIL)  */
+	u32 sefcr;		/*  System External Interrupt Force Register (SEI)  */
+	u32 serfr;		/*  System Error Force Register (SERR)  */
+	u32 scvcr;		/* System Critical Interrupt Vector Register */
+#define SCVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
+					   critical interrupt vector. */
+#define SCVCR_CVEC	0x0000007F	/* Critical interrupt vector */
+#define SCVCR_RES	~(SCVCR_CVECX|SCVCR_CVEC)
+	u32 smvcr;		/* System Management Interrupt Vector Register */
+#define SMVCR_CVECX	0xFC000000	/* Backward (MPC8260) compatible
+					   critical interrupt vector. */
+#define SMVCR_CVEC	0x0000007F	/* Critical interrupt vector */
+#define SMVCR_RES	~(SMVCR_CVECX|SMVCR_CVEC)
+	u8 res3[0x98];
+} ipic83xx_t;
 
 /*
  * System Arbiter Registers
  */
-typedef struct arbiter8349 {
-	u32 acr; /* Arbiter Configuration Register */
-#define ACR_COREDIS    0x10000000 /* Core disable. */
-#define ACR_PIPE_DEP   0x00070000 /* Pipeline depth (number of outstanding transactions). */
-#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
-#define ACR_RPTCNT     0x00000700 /* Repeat count. */
-#define ACR_APARK      0x00000030 /* Address parking. */
-#define ACR_PARKM	   0x0000000F /* Parking master. */
+typedef struct arbiter83xx {
+	u32 acr;		/* Arbiter Configuration Register */
+#define ACR_COREDIS    0x10000000	/* Core disable. */
+#define ACR_COREDIS_SHIFT		(31-7)
+#define ACR_PIPE_DEP   0x00070000	/* Pipeline depth (number of outstanding transactions). */
+#define ACR_PIPE_DEP_SHIFT		(31-15)
+#define ACR_PCI_RPTCNT 0x00007000	/* PCI repeat count. */
+#define ACR_PCI_RPTCNT_SHIFT		(31-19)
+#define ACR_RPTCNT     0x00000700	/* Repeat count. */
+#define ACR_RPTCNT_SHIFT		(31-23)
+#define ACR_APARK      0x00000030	/* Address parking. */
+#define ACR_APARK_SHIFT			(31-27)
+#define ACR_PARKM	   0x0000000F	/* Parking master. */
+#define ACR_PARKM_SHIFT			(31-31)
 #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
-	u32 atr; /* Arbiter Timers Register */
-#define ATR_DTO 0x00FF0000 /* Data time out. */
-#define ATR_ATO	0x000000FF /* Address time out. */
+	u32 atr;		/* Arbiter Timers Register */
+#define ATR_DTO 0x00FF0000	/* Data time out. */
+#define ATR_ATO	0x000000FF	/* Address time out. */
 #define ATR_RES ~(ATR_DTO|ATR_ATO)
 	u8 res[4];
-	u32 aer; /* Arbiter Event Register (AE)*/
-	u32 aidr; /* Arbiter Interrupt Definition Register (AE) */
-	u32 amr; /* Arbiter Mask Register (AE) */
-	u32 aeatr; /* Arbiter Event Attributes Register */
-#define AEATR_EVENT   0x07000000 /* Event type. */
-#define AEATR_MSTR_ID 0x001F0000 /* Master Id. */
-#define AEATR_TBST    0x00000800 /* Transfer burst. */
-#define AEATR_TSIZE   0x00000700 /* Transfer Size. */
-#define AEATR_TTYPE	  0x0000001F /* Transfer Type. */
+	u32 aer;		/* Arbiter Event Register (AE) */
+	u32 aidr;		/* Arbiter Interrupt Definition Register (AE) */
+	u32 amr;		/* Arbiter Mask Register (AE) */
+	u32 aeatr;		/* Arbiter Event Attributes Register */
+#define AEATR_EVENT   0x07000000	/* Event type. */
+#define AEATR_MSTR_ID 0x001F0000	/* Master Id. */
+#define AEATR_TBST    0x00000800	/* Transfer burst. */
+#define AEATR_TSIZE   0x00000700	/* Transfer Size. */
+#define AEATR_TTYPE	  0x0000001F	/* Transfer Type. */
 #define AEATR_RES ~(AEATR_EVENT|AEATR_MSTR_ID|AEATR_TBST|AEATR_TSIZE|AEATR_TTYPE)
-	u32 aeadr; /* Arbiter Event Address Register */
-	u32 aerr; /* Arbiter Event Response Register (AE)*/
-#define AE_ETEA 0x00000020 /* Transfer error. */
-#define AE_RES_ 0x00000010 /* Reserved transfer type. */
-#define AE_ECW  0x00000008 /* External control word transfer type. */
-#define AE_AO   0x00000004 /* Address Only transfer type. */
-#define AE_DTO  0x00000002 /* Data time out. */
-#define AE_ATO	0x00000001 /* Address time out. */
+	u32 aeadr;		/* Arbiter Event Address Register */
+	u32 aerr;		/* Arbiter Event Response Register (AE) */
+#define AE_ETEA 0x00000020	/* Transfer error. */
+#define AE_RES_ 0x00000010	/* Reserved transfer type. */
+#define AE_ECW  0x00000008	/* External control word transfer type. */
+#define AE_AO   0x00000004	/* Address Only transfer type. */
+#define AE_DTO  0x00000002	/* Data time out. */
+#define AE_ATO	0x00000001	/* Address time out. */
 #define AE_RSRV ~(AE_ETEA|AE_RES_|AE_ECW|AE_AO|AE_DTO|AE_ATO)
 	u8 res1[0xDC];
-} arbiter8349_t;
+} arbiter83xx_t;
 
 /*
  * Reset Module
  */
-typedef struct reset8349 {
-	u32    rcwl; /* RCWL Register  */
-#define RCWL_LBIUCM  0x80000000 /* LBIUCM  */
+typedef struct reset83xx {
+	u32 rcwl;		/* RCWL Register  */
+#define RCWL_LBIUCM  0x80000000	/* LBIUCM  */
 #define RCWL_LBIUCM_SHIFT    31
-#define RCWL_DDRCM   0x40000000 /* DDRCM  */
+#define RCWL_DDRCM   0x40000000	/* DDRCM  */
 #define RCWL_DDRCM_SHIFT     30
-#define RCWL_SVCOD   0x30000000 /* SVCOD  */
-#define RCWL_SPMF    0x0f000000 /* SPMF  */
+#if defined (CONFIG_MPC8349)
+#define RCWL_SVCOD   0x30000000	/* SVCOD  */
+#endif
+#define RCWL_SPMF    0x0f000000	/* SPMF  */
 #define RCWL_SPMF_SHIFT      24
-#define RCWL_COREPLL 0x007F0000 /* COREPLL  */
+#define RCWL_COREPLL 0x007F0000	/* COREPLL  */
 #define RCWL_COREPLL_SHIFT   16
-#define RCWL_CEVCOD  0x000000C0 /* CEVCOD  */
-#define RCWL_CEPDF   0x00000020 /* CEPDF  */
-#define RCWL_CEPMF   0x0000001F /* CEPMF  */
-#define RCWL_RES ~(RCWL_BIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
-	u32    rcwh; /* RCHL Register  */
-#define RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+#define RCWL_CEVCOD  0x000000C0	/* CEVCOD  */
+#define RCWL_CEPDF   0x00000020	/* CEPDF  */
+#define RCWL_CEPDF_SHIFT      5
+#define RCWL_CEPMF   0x0000001F	/* CEPMF  */
+#define RCWL_CEPMF_SHIFT      0
+#if defined (CONFIG_MPC8349)
+#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SVCOD|RCWL_SPMF|RCWL_COREPLL|RCWL_CEVCOD|RCWL_CEPDF|RCWL_CEPMF)
+#elif defined (CONFIG_MPC8360)
+#define RCWL_RES ~(RCWL_LBIUCM|RCWL_DDRCM|RCWL_SPMF|RCWL_COREPLL|RCWL_CEPDF|RCWL_CEPMF)
+#endif
+	u32 rcwh;		/* RCHL Register  */
+#define RCWH_PCIHOST 0x80000000	/* PCIHOST  */
 #define RCWH_PCIHOST_SHIFT   31
-#define RCWH_PCI64   0x40000000 /* PCI64  */
-#define RCWH_PCI1ARB 0x20000000 /* PCI1ARB  */
-#define RCWH_PCI2ARB 0x10000000 /* PCI2ARB  */
-#define RCWH_COREDIS 0x08000000 /* COREDIS  */
-#define RCWH_BMS     0x04000000 /* BMS  */
-#define RCWH_BOOTSEQ 0x03000000 /* BOOTSEQ  */
-#define RCWH_SWEN    0x00800000 /* SWEN  */
-#define RCWH_ROMLOC  0x00700000 /* ROMLOC  */
-#define RCWH_TSEC1M  0x0000c000 /* TSEC1M  */
-#define RCWH_TSEC2M  0x00003000 /* TSEC2M  */
-#define RCWH_TPR     0x00000100 /* TPR  */
-#define RCWH_TLE     0x00000008 /* TLE  */
-#define RCWH_LALE    0x00000004 /* LALE  */
+#if defined (CONFIG_MPC8349)
+#define RCWH_PCI64   0x40000000	/* PCI64  */
+#define RCWH_PCI1ARB 0x20000000	/* PCI1ARB  */
+#define RCWH_PCI2ARB 0x10000000	/* PCI2ARB  */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_PCIARB   0x20000000	/* PCI internal arbiter mode. */
+#define RCWH_PCICKDRV 0x10000000	/* PCI clock output drive. */
+#endif
+#define RCWH_COREDIS 0x08000000	/* COREDIS  */
+#define RCWH_BMS     0x04000000	/* BMS  */
+#define RCWH_BOOTSEQ 0x03000000	/* BOOTSEQ  */
+#define RCWH_SWEN    0x00800000	/* SWEN  */
+#define RCWH_ROMLOC  0x00700000	/* ROMLOC  */
+#if defined (CONFIG_MPC8349)
+#define RCWH_TSEC1M  0x0000c000	/* TSEC1M  */
+#define RCWH_TSEC2M  0x00003000	/* TSEC2M  */
+#define RCWH_TPR     0x00000100	/* TPR  */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_SDDRIOE  0x00000010	/* Secondary DDR IO Enable.  */
+#endif
+#define RCWH_TLE     0x00000008	/* TLE  */
+#define RCWH_LALE    0x00000004	/* LALE  */
+#if defined (CONFIG_MPC8349)
 #define RCWH_RES	~(RCWH_PCIHOST | RCWH_PCI64 | RCWH_PCI1ARB \
 			| RCWH_PCI2ARB | RCWH_COREDIS | RCWH_BMS \
 			| RCWH_BOOTSEQ | RCWH_SWEN | RCWH_ROMLOC \
 			| RCWH_TSEC1M | RCWH_TSEC2M | RCWH_TPR \
 			| RCWH_TLE | RCWH_LALE)
-	u8     res0[8];
-	u32    rsr; /* Reset status Register  */
-#define RSR_RSTSRC 0xE0000000 /* Reset source  */
+#elif defined (CONFIG_MPC8360)
+#define RCWH_RES	~(RCWH_PCIHOST|RCWH_PCIARB|RCWH_PCICKDRV \
+			|RCWH_COREDIS|RCWH_BMS|RCWH_BOOTSEQ|RCWH_SWEN \
+			|RCWH_SDDRIOE |RCWH_TLE)
+#endif
+	u8 res0[8];
+	u32 rsr;		/* Reset status Register  */
+#define RSR_RSTSRC 0xE0000000	/* Reset source  */
 #define RSR_RSTSRC_SHIFT   29
-#define RSR_BSF    0x00010000 /* Boot seq. fail  */
+#define RSR_BSF    0x00010000	/* Boot seq. fail  */
 #define RSR_BSF_SHIFT      16
-#define RSR_SWSR   0x00002000 /* software soft reset  */
+#define RSR_SWSR   0x00002000	/* software soft reset  */
 #define RSR_SWSR_SHIFT     13
-#define RSR_SWHR   0x00001000 /* software hard reset  */
+#define RSR_SWHR   0x00001000	/* software hard reset  */
 #define RSR_SWHR_SHIFT     12
-#define RSR_JHRS   0x00000200 /* jtag hreset  */
+#define RSR_JHRS   0x00000200	/* jtag hreset  */
 #define RSR_JHRS_SHIFT      9
-#define RSR_JSRS   0x00000100 /* jtag sreset status  */
+#define RSR_JSRS   0x00000100	/* jtag sreset status  */
 #define RSR_JSRS_SHIFT      8
-#define RSR_CSHR   0x00000010 /* checkstop reset status  */
+#define RSR_CSHR   0x00000010	/* checkstop reset status  */
 #define RSR_CSHR_SHIFT      4
-#define RSR_SWRS   0x00000008 /* software watchdog reset status  */
+#define RSR_SWRS   0x00000008	/* software watchdog reset status  */
 #define RSR_SWRS_SHIFT      3
-#define RSR_BMRS   0x00000004 /* bus monitop reset status  */
+#define RSR_BMRS   0x00000004	/* bus monitop reset status  */
 #define RSR_BMRS_SHIFT      2
-#define RSR_SRS    0x00000002 /* soft reset status  */
+#define RSR_SRS    0x00000002	/* soft reset status  */
 #define RSR_SRS_SHIFT       1
-#define RSR_HRS    0x00000001 /* hard reset status  */
+#define RSR_HRS    0x00000001	/* hard reset status  */
 #define RSR_HRS_SHIFT       0
 #define RSR_RES ~(RSR_RSTSRC | RSR_BSF | RSR_SWSR | RSR_SWHR | RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS | RSR_BMRS | RSR_SRS | RSR_HRS)
-	u32    rmr; /* Reset mode Register  */
-#define RMR_CSRE   0x00000001 /* checkstop reset enable  */
+	u32 rmr;		/* Reset mode Register  */
+#define RMR_CSRE   0x00000001	/* checkstop reset enable  */
 #define RMR_CSRE_SHIFT      0
 #define RMR_RES ~(RMR_CSRE)
-	u32    rpr; /* Reset protection Register  */
-	u32    rcr; /* Reset Control Register  */
-#define RCR_SWHR 0x00000002 /* software hard reset  */
-#define RCR_SWSR 0x00000001 /* software soft reset  */
+	u32 rpr;		/* Reset protection Register  */
+	u32 rcr;		/* Reset Control Register  */
+#define RCR_SWHR 0x00000002	/* software hard reset  */
+#define RCR_SWSR 0x00000001	/* software soft reset  */
 #define RCR_RES ~(RCR_SWHR | RCR_SWSR)
-	u32    rcer; /* Reset Control Enable Register  */
-#define RCER_CRE 0x00000001 /* software hard reset  */
+	u32 rcer;		/* Reset Control Enable Register  */
+#define RCER_CRE 0x00000001	/* software hard reset  */
 #define RCER_RES ~(RCER_CRE)
-	u8     res1[0xDC];
-} reset8349_t;
-
-typedef struct clk8349 {
-	u32    spmr; /* system PLL mode Register  */
-#define SPMR_LBIUCM  0x80000000 /* LBIUCM  */
-#define SPMR_DDRCM   0x40000000 /* DDRCM  */
-#define SPMR_SVCOD   0x30000000 /* SVCOD  */
-#define SPMR_SPMF    0x0F000000 /* SPMF  */
-#define SPMR_CKID    0x00800000 /* CKID  */
+	u8 res1[0xDC];
+} reset83xx_t;
+
+typedef struct clk83xx {
+	u32 spmr;		/* system PLL mode Register  */
+#define SPMR_LBIUCM  0x80000000	/* LBIUCM  */
+#define SPMR_DDRCM   0x40000000	/* DDRCM  */
+#if defined (CONFIG_MPC8349)
+#define SPMR_SVCOD   0x30000000	/* SVCOD  */
+#endif
+#define SPMR_SPMF    0x0F000000	/* SPMF  */
+#define SPMR_CKID    0x00800000	/* CKID  */
 #define SPMR_CKID_SHIFT 23
-#define SPMR_COREPLL 0x007F0000 /* COREPLL  */
-#define SPMR_CEVCOD  0x000000C0 /* CEVCOD  */
-#define SPMR_CEPDF   0x00000020 /* CEPDF  */
-#define SPMR_CEPMF   0x0000001F /* CEPMF  */
+#define SPMR_COREPLL 0x007F0000	/* COREPLL  */
+#define SPMR_CEVCOD  0x000000C0	/* CEVCOD  */
+#define SPMR_CEPDF   0x00000020	/* CEPDF  */
+#define SPMR_CEPMF   0x0000001F	/* CEPMF  */
+#if defined (CONFIG_MPC8349)
 #define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SVCOD \
 			| SPMR_SPMF | SPMR_CKID | SPMR_COREPLL \
 			| SPMR_CEVCOD | SPMR_CEPDF | SPMR_CEPMF)
-	u32    occr; /* output clock control Register  */
-#define OCCR_PCICOE0 0x80000000 /* PCICOE0  */
-#define OCCR_PCICOE1 0x40000000 /* PCICOE1  */
-#define OCCR_PCICOE2 0x20000000 /* PCICOE2  */
-#define OCCR_PCICOE3 0x10000000 /* PCICOE3  */
-#define OCCR_PCICOE4 0x08000000 /* PCICOE4  */
-#define OCCR_PCICOE5 0x04000000 /* PCICOE5  */
-#define OCCR_PCICOE6 0x02000000 /* PCICOE6  */
-#define OCCR_PCICOE7 0x01000000 /* PCICOE7  */
-#define OCCR_PCICD0  0x00800000 /* PCICD0  */
-#define OCCR_PCICD1  0x00400000 /* PCICD1  */
-#define OCCR_PCICD2  0x00200000 /* PCICD2  */
-#define OCCR_PCICD3  0x00100000 /* PCICD3  */
-#define OCCR_PCICD4  0x00080000 /* PCICD4  */
-#define OCCR_PCICD5  0x00040000 /* PCICD5  */
-#define OCCR_PCICD6  0x00020000 /* PCICD6  */
-#define OCCR_PCICD7  0x00010000 /* PCICD7  */
-#define OCCR_PCI1CR  0x00000002 /* PCI1CR  */
-#define OCCR_PCI2CR  0x00000001 /* PCI2CR  */
+#elif defined (CONFIG_MPC8360)
+#define SPMR_RES	~(SPMR_LBIUCM | SPMR_DDRCM | SPMR_SPMF \
+			| SPMR_CKID | SPMR_COREPLL | SPMR_CEVCOD \
+			| SPMR_CEPDF | SPMR_CEPMF)
+#endif
+	u32 occr;		/* output clock control Register  */
+#define OCCR_PCICOE0 0x80000000	/* PCICOE0  */
+#define OCCR_PCICOE1 0x40000000	/* PCICOE1  */
+#define OCCR_PCICOE2 0x20000000	/* PCICOE2  */
+#if defined (CONFIG_MPC8349)
+#define OCCR_PCICOE3 0x10000000	/* PCICOE3  */
+#define OCCR_PCICOE4 0x08000000	/* PCICOE4  */
+#define OCCR_PCICOE5 0x04000000	/* PCICOE5  */
+#define OCCR_PCICOE6 0x02000000	/* PCICOE6  */
+#define OCCR_PCICOE7 0x01000000	/* PCICOE7  */
+#endif
+#define OCCR_PCICD0  0x00800000	/* PCICD0  */
+#define OCCR_PCICD1  0x00400000	/* PCICD1  */
+#define OCCR_PCICD2  0x00200000	/* PCICD2  */
+#if defined (CONFIG_MPC8349)
+#define OCCR_PCICD3  0x00100000	/* PCICD3  */
+#define OCCR_PCICD4  0x00080000	/* PCICD4  */
+#define OCCR_PCICD5  0x00040000	/* PCICD5  */
+#define OCCR_PCICD6  0x00020000	/* PCICD6  */
+#define OCCR_PCICD7  0x00010000	/* PCICD7  */
+#define OCCR_PCI1CR  0x00000002	/* PCI1CR  */
+#define OCCR_PCI2CR  0x00000001	/* PCI2CR  */
 #define OCCR_RES	~(OCCR_PCICOE0 | OCCR_PCICOE1 | OCCR_PCICOE2 \
 			| OCCR_PCICOE3 | OCCR_PCICOE4 | OCCR_PCICOE5 \
 			| OCCR_PCICOE6 | OCCR_PCICOE7 | OCCR_PCICD0 \
 			| OCCR_PCICD1 | OCCR_PCICD2  | OCCR_PCICD3 \
 			| OCCR_PCICD4  | OCCR_PCICD5 | OCCR_PCICD6  \
 			| OCCR_PCICD7  | OCCR_PCI1CR  | OCCR_PCI2CR )
-	u32    sccr; /* system clock control Register  */
-#define SCCR_TSEC1CM  0xc0000000 /* TSEC1CM  */
+#endif
+#if defined (CONFIG_MPC8360)
+#define OCCR_PCICR	0x00000002	/* PCI clock rate  */
+#define OCCR_RES	~(OCCR_PCICOE0|OCCR_PCICOE1|OCCR_PCICOE2 \
+			|OCCR_PCICD0|OCCR_PCICD1|OCCR_PCICD2|OCCR_PCICR )
+#endif
+	u32 sccr;		/* system clock control Register  */
+#if defined (CONFIG_MPC8349)
+#define SCCR_TSEC1CM  0xc0000000	/* TSEC1CM  */
 #define SCCR_TSEC1CM_SHIFT 30
-#define SCCR_TSEC2CM  0x30000000 /* TSEC2CM  */
+#define SCCR_TSEC2CM  0x30000000	/* TSEC2CM  */
 #define SCCR_TSEC2CM_SHIFT 28
-#define SCCR_ENCCM    0x03000000 /* ENCCM  */
+#endif
+#define SCCR_ENCCM    0x03000000	/* ENCCM  */
 #define SCCR_ENCCM_SHIFT 24
-#define SCCR_USBMPHCM 0x00c00000 /* USBMPHCM  */
+#if defined (CONFIG_MPC8349)
+#define SCCR_USBMPHCM 0x00c00000	/* USBMPHCM  */
 #define SCCR_USBMPHCM_SHIFT 22
-#define SCCR_USBDRCM  0x00300000 /* USBDRCM  */
+#define SCCR_USBDRCM  0x00300000	/* USBDRCM  */
 #define SCCR_USBDRCM_SHIFT 20
-#define SCCR_PCICM    0x00010000 /* PCICM  */
+#endif
+#define SCCR_PCICM    0x00010000	/* PCICM  */
+#if defined (CONFIG_MPC8349)
 #define SCCR_RES	~( SCCR_TSEC1CM | SCCR_TSEC2CM | SCCR_ENCCM \
 			| SCCR_USBMPHCM | SCCR_USBDRCM | SCCR_PCICM)
-	u8     res0[0xF4];
-} clk8349_t;
+#endif
+#if defined (CONFIG_MPC8360)
+#define SCCR_RES	~(SCCR_ENCCM | SCCR_PCICM)
+#endif
+	u8 res0[0xF4];
+} clk83xx_t;
 
 /*
  * Power Management Control Module
  */
-typedef struct pmc8349 {
-	u32    pmccr; /* PMC Configuration Register  */
-#define PMCCR_SLPEN 0x00000001 /* System Low Power Enable  */
-#define PMCCR_DLPEN 0x00000002 /* DDR SDRAM Low Power Enable  */
-#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN)
-	u32    pmcer; /* PMC Event Register  */
-#define PMCER_PMCI  0x00000001 /* PMC Interrupt  */
+typedef struct pmc83xx {
+	u32 pmccr;		/* PMC Configuration Register  */
+#define PMCCR_SLPEN 0x00000001	/* System Low Power Enable  */
+#define PMCCR_DLPEN 0x00000002	/* DDR SDRAM Low Power Enable  */
+#if defined (CONFIG_MPC8360)
+#define PMCCR_SDLPEN 0x00000004	/* Secondary DDR SDRAM Low Power Enable  */
+#define PMCCR_RES ~(PMCCR_SLPEN | PMCCR_DLPEN | PMCCR_SDLPEN)
+#elif defined (CONFIG_MPC8349)
+#define PMCCR_RES    ~(PMCCR_SLPEN | PMCCR_DLPEN)
+#endif
+	u32 pmcer;		/* PMC Event Register  */
+#define PMCER_PMCI  0x00000001	/* PMC Interrupt  */
 #define PMCER_RES ~(PMCER_PMCI)
-	u32    pmcmr; /* PMC Mask Register  */
-#define PMCMR_PMCIE 0x0001 /* PMC Interrupt Enable  */
+	u32 pmcmr;		/* PMC Mask Register  */
+#define PMCMR_PMCIE 0x0001	/* PMC Interrupt Enable  */
 #define PMCMR_RES ~(PMCMR_PMCIE)
 	u8 res0[0xF4];
-} pmc8349_t;
-
+} pmc83xx_t;
 
+#if defined (CONFIG_MPC8349)
 /*
  * general purpose I/O module
  */
-typedef struct gpio8349 {
-	u32 dir; /* direction register */
-	u32 odr; /* open drain register */
-	u32 dat; /* data register */
-	u32 ier; /* interrupt event register */
-	u32 imr; /* interrupt mask register */
-	u32 icr; /* external interrupt control register */
+typedef struct gpio83xx {
+	u32 dir;		/* direction register */
+	u32 odr;		/* open drain register */
+	u32 dat;		/* data register */
+	u32 ier;		/* interrupt event register */
+	u32 imr;		/* interrupt mask register */
+	u32 icr;		/* external interrupt control register */
 	u8 res0[0xE8];
-} gpio8349_t;
+} gpio83xx_t;
+#endif
+
+#if defined (CONFIG_MPC8360)
+/*
+ * QE Ports Interrupts Registers
+ */
+typedef struct qepi83xx {
+	u8 res0[0xC];
+	u32 qepier;		/* QE Ports Interrupt Event Register */
+#define QEPIER_PA15 0x80000000
+#define QEPIER_PA16 0x40000000
+#define QEPIER_PA29 0x20000000
+#define QEPIER_PA30 0x10000000
+#define QEPIER_PB3  0x08000000
+#define QEPIER_PB5  0x04000000
+#define QEPIER_PB12 0x02000000
+#define QEPIER_PB13 0x01000000
+#define QEPIER_PB26 0x00800000
+#define QEPIER_PB27 0x00400000
+#define QEPIER_PC27 0x00200000
+#define QEPIER_PC28 0x00100000
+#define QEPIER_PC29 0x00080000
+#define QEPIER_PD12 0x00040000
+#define QEPIER_PD13 0x00020000
+#define QEPIER_PD16 0x00010000
+#define QEPIER_PD17 0x00008000
+#define QEPIER_PD26 0x00004000
+#define QEPIER_PD27 0x00002000
+#define QEPIER_PE12 0x00001000
+#define QEPIER_PE13 0x00000800
+#define QEPIER_PE24 0x00000400
+#define QEPIER_PE25 0x00000200
+#define QEPIER_PE26 0x00000100
+#define QEPIER_PE27 0x00000080
+#define QEPIER_PE31 0x00000040
+#define QEPIER_PF20 0x00000020
+#define QEPIER_PG31 0x00000010
+#define QEPIER_RES ~(QEPIER_PA15|QEPIER_PA16|QEPIER_PA29|QEPIER_PA30|QEPIER_PB3 \
+		   |QEPIER_PB5|QEPIER_PB12|QEPIER_PB13|QEPIER_PB26|QEPIER_PB27 \
+		   |QEPIER_PC27|QEPIER_PC28|QEPIER_PC29|QEPIER_PD12|QEPIER_PD13 \
+		   |QEPIER_PD16|QEPIER_PD17|QEPIER_PD26|QEPIER_PD27|QEPIER_PE12 \
+		   |QEPIER_PE13|QEPIER_PE24|QEPIER_PE25|QEPIER_PE26|QEPIER_PE27 \
+		   |QEPIER_PE31|QEPIER_PF20|QEPIER_PG31)
+	u32 qepimr;		/* QE Ports Interrupt Mask Register */
+#define QEPIMR_PA15 0x80000000
+#define QEPIMR_PA16 0x40000000
+#define QEPIMR_PA29 0x20000000
+#define QEPIMR_PA30 0x10000000
+#define QEPIMR_PB3  0x08000000
+#define QEPIMR_PB5  0x04000000
+#define QEPIMR_PB12 0x02000000
+#define QEPIMR_PB13 0x01000000
+#define QEPIMR_PB26 0x00800000
+#define QEPIMR_PB27 0x00400000
+#define QEPIMR_PC27 0x00200000
+#define QEPIMR_PC28 0x00100000
+#define QEPIMR_PC29 0x00080000
+#define QEPIMR_PD12 0x00040000
+#define QEPIMR_PD13 0x00020000
+#define QEPIMR_PD16 0x00010000
+#define QEPIMR_PD17 0x00008000
+#define QEPIMR_PD26 0x00004000
+#define QEPIMR_PD27 0x00002000
+#define QEPIMR_PE12 0x00001000
+#define QEPIMR_PE13 0x00000800
+#define QEPIMR_PE24 0x00000400
+#define QEPIMR_PE25 0x00000200
+#define QEPIMR_PE26 0x00000100
+#define QEPIMR_PE27 0x00000080
+#define QEPIMR_PE31 0x00000040
+#define QEPIMR_PF20 0x00000020
+#define QEPIMR_PG31 0x00000010
+#define QEPIMR_RES ~(QEPIMR_PA15|QEPIMR_PA16|QEPIMR_PA29|QEPIMR_PA30|QEPIMR_PB3 \
+		   |QEPIMR_PB5|QEPIMR_PB12|QEPIMR_PB13|QEPIMR_PB26|QEPIMR_PB27 \
+		   |QEPIMR_PC27|QEPIMR_PC28|QEPIMR_PC29|QEPIMR_PD12|QEPIMR_PD13 \
+		   |QEPIMR_PD16|QEPIMR_PD17|QEPIMR_PD26|QEPIMR_PD27|QEPIMR_PE12 \
+		   |QEPIMR_PE13|QEPIMR_PE24|QEPIMR_PE25|QEPIMR_PE26|QEPIMR_PE27 \
+		   |QEPIMR_PE31|QEPIMR_PF20|QEPIMR_PG31)
+	u32 qepicr;		/* QE Ports Interrupt Control Register */
+#define QEPICR_PA15 0x80000000
+#define QEPICR_PA16 0x40000000
+#define QEPICR_PA29 0x20000000
+#define QEPICR_PA30 0x10000000
+#define QEPICR_PB3  0x08000000
+#define QEPICR_PB5  0x04000000
+#define QEPICR_PB12 0x02000000
+#define QEPICR_PB13 0x01000000
+#define QEPICR_PB26 0x00800000
+#define QEPICR_PB27 0x00400000
+#define QEPICR_PC27 0x00200000
+#define QEPICR_PC28 0x00100000
+#define QEPICR_PC29 0x00080000
+#define QEPICR_PD12 0x00040000
+#define QEPICR_PD13 0x00020000
+#define QEPICR_PD16 0x00010000
+#define QEPICR_PD17 0x00008000
+#define QEPICR_PD26 0x00004000
+#define QEPICR_PD27 0x00002000
+#define QEPICR_PE12 0x00001000
+#define QEPICR_PE13 0x00000800
+#define QEPICR_PE24 0x00000400
+#define QEPICR_PE25 0x00000200
+#define QEPICR_PE26 0x00000100
+#define QEPICR_PE27 0x00000080
+#define QEPICR_PE31 0x00000040
+#define QEPICR_PF20 0x00000020
+#define QEPICR_PG31 0x00000010
+#define QEPICR_RES ~(QEPICR_PA15|QEPICR_PA16|QEPICR_PA29|QEPICR_PA30|QEPICR_PB3 \
+		   |QEPICR_PB5|QEPICR_PB12|QEPICR_PB13|QEPICR_PB26|QEPICR_PB27 \
+		   |QEPICR_PC27|QEPICR_PC28|QEPICR_PC29|QEPICR_PD12|QEPICR_PD13 \
+		   |QEPICR_PD16|QEPICR_PD17|QEPICR_PD26|QEPICR_PD27|QEPICR_PE12 \
+		   |QEPICR_PE13|QEPICR_PE24|QEPICR_PE25|QEPICR_PE26|QEPICR_PE27 \
+		   |QEPICR_PE31|QEPICR_PF20|QEPICR_PG31)
+	u8 res1[0xE8];
+} qepi83xx_t;
+
+/*
+ * general purpose I/O module
+ */
+typedef struct gpio_n {
+	u32 podr;		/* Open Drain Register */
+	u32 pdat;		/* Data Register */
+	u32 dir1;		/* direction register 1 */
+	u32 dir2;		/* direction register 2 */
+	u32 ppar1;		/* Pin Assignment Register 1 */
+	u32 ppar2;		/* Pin Assignment Register 2 */
+} gpio_n_t;
+
+typedef struct gpio83xx {
+	gpio_n_t ioport[0x7];
+	u8 res0[0x358];
+} gpio83xx_t;
+
+/*
+ * QE Secondary Bus Access Windows
+ */
+
+typedef struct qesba83xx {
+	u32 lbmcsar;		/* Local bus memory controller start address */
+#define LBMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
+#define LBMCSAR_RES	~(LBMCSAR_SA)
+	u32 sdmcsar;		/* Secondary DDR memory controller start address */
+#define SDMCSAR_SA	0x000FFFFF	/* 20 most-significant bits of the start address */
+#define SDMCSAR_RES	~(SDMCSAR_SA)
+	u8 res0[0x38];
+	u32 lbmcear;		/* Local bus memory controller end address */
+#define LBMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
+#define LBMCEAR_RES	~(LBMCEAR_EA)
+	u32 sdmcear;		/* Secondary DDR memory controller end address */
+#define SDMCEAR_EA	0x000FFFFF	/* 20 most-significant bits of the end address */
+#define SDMCEAR_RES	~(SDMCEAR_EA)
+	u8 res1[0x38];
+	u32 lbmcar;		/* Local bus memory controller attributes  */
+#define LBMCAR_WEN	0x00000001	/* Forward transactions to the QE local bus */
+#define LBMCAR_RES	~(LBMCAR_WEN)
+	u32 sdmcar;		/* Secondary DDR memory controller attributes */
+#define SDMCAR_WEN	0x00000001	/* Forward transactions to the second DDR bus */
+#define SDMCAR_RES	~(SDMCAR_WEN)
+	u8 res2[0x778];
+} qesba83xx_t;
+#endif
 
 /*
  * DDR Memory Controller Memory Map
  */
-typedef struct ddr_cs_bnds{
+typedef struct ddr_cs_bnds {
 	u32 csbnds;
 #define CSBNDS_SA 0x00FF0000
 #define CSBNDS_SA_SHIFT    8
 #define CSBNDS_EA 0x000000FF
 #define CSBNDS_EA_SHIFT   24
-	u8  res0[4];
+	u8 res0[4];
 } ddr_cs_bnds_t;
 
-typedef struct ddr8349{
-	ddr_cs_bnds_t csbnds[4];            /**< Chip Select x Memory Bounds */
+typedef struct ddr83xx {
+	ddr_cs_bnds_t csbnds[4];	    /**< Chip Select x Memory Bounds */
 	u8 res0[0x60];
-	u32 cs_config[4];       /**< Chip Select x Configuration */
+	u32 cs_config[4];	/**< Chip Select x Configuration */
 #define CSCONFIG_EN         0x80000000
 #define CSCONFIG_AP         0x00800000
 #define CSCONFIG_ROW_BIT    0x00000700
@@ -598,7 +941,7 @@ typedef struct ddr8349{
 #define CSCONFIG_COL_BIT_10 0x00000002
 #define CSCONFIG_COL_BIT_11 0x00000003
 	u8 res1[0x78];
-	u32 timing_cfg_1;       /**< SDRAM Timing Configuration 1 */
+	u32 timing_cfg_1;	/**< SDRAM Timing Configuration 1 */
 #define TIMING_CFG1_PRETOACT 0x70000000
 #define TIMING_CFG1_PRETOACT_SHIFT   28
 #define TIMING_CFG1_ACTTOPRE 0x0F000000
@@ -615,18 +958,18 @@ typedef struct ddr8349{
 #define TIMING_CFG1_ACTTOACT_SHIFT    4
 #define TIMING_CFG1_WRTORD   0x00000007
 #define TIMING_CFG1_WRTORD_SHIFT      0
-#define TIMING_CFG1_CASLAT_20 0x00030000  /* CAS latency = 2.0 */
-#define TIMING_CFG1_CASLAT_25 0x00040000  /* CAS latency = 2.5 */
+#define TIMING_CFG1_CASLAT_20 0x00030000	/* CAS latency = 2.0 */
+#define TIMING_CFG1_CASLAT_25 0x00040000	/* CAS latency = 2.5 */
 
-	u32 timing_cfg_2;       /**< SDRAM Timing Configuration 2 */
+	u32 timing_cfg_2;	/**< SDRAM Timing Configuration 2 */
 #define TIMING_CFG2_CPO           0x0F000000
 #define TIMING_CFG2_CPO_SHIFT             24
 #define TIMING_CFG2_ACSM          0x00080000
 #define TIMING_CFG2_WR_DATA_DELAY 0x00001C00
 #define TIMING_CFG2_WR_DATA_DELAY_SHIFT   10
-#define TIMING_CFG2_CPO_DEF       0x00000000  /* default (= CASLAT + 1) */
+#define TIMING_CFG2_CPO_DEF       0x00000000	/* default (= CASLAT + 1) */
 
-	u32 sdram_cfg;          /**< SDRAM Control Configuration */
+	u32 sdram_cfg;		/**< SDRAM Control Configuration */
 #define SDRAM_CFG_MEM_EN     0x80000000
 #define SDRAM_CFG_SREN       0x40000000
 #define SDRAM_CFG_ECC_EN     0x20000000
@@ -641,39 +984,39 @@ typedef struct ddr8349{
 #define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
 
 	u8 res2[4];
-	u32 sdram_mode;         /**< SDRAM Mode Configuration */
+	u32 sdram_mode;		/**< SDRAM Mode Configuration */
 #define SDRAM_MODE_ESD 0xFFFF0000
 #define SDRAM_MODE_ESD_SHIFT   16
 #define SDRAM_MODE_SD  0x0000FFFF
 #define SDRAM_MODE_SD_SHIFT     0
-#define DDR_MODE_EXT_MODEREG    0x4000  /* select extended mode reg */
-#define DDR_MODE_EXT_OPMODE     0x3FF8  /* operating mode, mask */
-#define DDR_MODE_EXT_OP_NORMAL  0x0000  /* normal operation */
-#define DDR_MODE_QFC            0x0004  /* QFC / compatibility, mask */
-#define DDR_MODE_QFC_COMP       0x0000  /* compatible to older SDRAMs */
-#define DDR_MODE_WEAK           0x0002  /* weak drivers */
-#define DDR_MODE_DLL_DIS        0x0001  /* disable DLL */
-#define DDR_MODE_CASLAT         0x0070  /* CAS latency, mask */
-#define DDR_MODE_CASLAT_15      0x0010  /* CAS latency 1.5 */
-#define DDR_MODE_CASLAT_20      0x0020  /* CAS latency 2 */
-#define DDR_MODE_CASLAT_25      0x0060  /* CAS latency 2.5 */
-#define DDR_MODE_CASLAT_30      0x0030  /* CAS latency 3 */
-#define DDR_MODE_BTYPE_SEQ      0x0000  /* sequential burst */
-#define DDR_MODE_BTYPE_ILVD     0x0008  /* interleaved burst */
-#define DDR_MODE_BLEN_2         0x0001  /* burst length 2 */
-#define DDR_MODE_BLEN_4         0x0002  /* burst length 4 */
-#define DDR_REFINT_166MHZ_7US   1302        /* exact value for 7.8125 µs */
-#define DDR_BSTOPRE     256     /* use 256 cycles as a starting point */
-#define DDR_MODE_MODEREG        0x0000  /* select mode register */
+#define DDR_MODE_EXT_MODEREG    0x4000	/* select extended mode reg */
+#define DDR_MODE_EXT_OPMODE     0x3FF8	/* operating mode, mask */
+#define DDR_MODE_EXT_OP_NORMAL  0x0000	/* normal operation */
+#define DDR_MODE_QFC            0x0004	/* QFC / compatibility, mask */
+#define DDR_MODE_QFC_COMP       0x0000	/* compatible to older SDRAMs */
+#define DDR_MODE_WEAK           0x0002	/* weak drivers */
+#define DDR_MODE_DLL_DIS        0x0001	/* disable DLL */
+#define DDR_MODE_CASLAT         0x0070	/* CAS latency, mask */
+#define DDR_MODE_CASLAT_15      0x0010	/* CAS latency 1.5 */
+#define DDR_MODE_CASLAT_20      0x0020	/* CAS latency 2 */
+#define DDR_MODE_CASLAT_25      0x0060	/* CAS latency 2.5 */
+#define DDR_MODE_CASLAT_30      0x0030	/* CAS latency 3 */
+#define DDR_MODE_BTYPE_SEQ      0x0000	/* sequential burst */
+#define DDR_MODE_BTYPE_ILVD     0x0008	/* interleaved burst */
+#define DDR_MODE_BLEN_2         0x0001	/* burst length 2 */
+#define DDR_MODE_BLEN_4         0x0002	/* burst length 4 */
+#define DDR_REFINT_166MHZ_7US   1302	/* exact value for 7.8125 µs */
+#define DDR_BSTOPRE     256	/* use 256 cycles as a starting point */
+#define DDR_MODE_MODEREG        0x0000	/* select mode register */
 
 	u8 res3[8];
-	u32 sdram_interval;     /**< SDRAM Interval Configuration */
+	u32 sdram_interval;	/**< SDRAM Interval Configuration */
 #define SDRAM_INTERVAL_REFINT  0x3FFF0000
 #define SDRAM_INTERVAL_REFINT_SHIFT    16
 #define SDRAM_INTERVAL_BSTOPRE 0x00003FFF
 #define SDRAM_INTERVAL_BSTOPRE_SHIFT    0
-	u8   res9[8];
-	u32  sdram_clk_cntl;
+	u8 res9[8];
+	u32 sdram_clk_cntl;
 #define DDR_SDRAM_CLK_CNTL_SS_EN		0x80000000
 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025	0x01000000
 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05	0x02000000
@@ -681,39 +1024,39 @@ typedef struct ddr8349{
 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1		0x04000000
 
 	u8 res4[0xCCC];
-	u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */
-	u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */
-	u32 ecc_err_inject;     /**< Memory Data Path Error Injection Mask ECC */
+	u32 data_err_inject_hi;	/**< Memory Data Path Error Injection Mask High */
+	u32 data_err_inject_lo;	/**< Memory Data Path Error Injection Mask Low */
+	u32 ecc_err_inject;	/**< Memory Data Path Error Injection Mask ECC */
 #define ECC_ERR_INJECT_EMB			(0x80000000>>22)	/* ECC Mirror Byte */
 #define ECC_ERR_INJECT_EIEN			(0x80000000>>23)	/* Error Injection Enable */
 #define ECC_ERR_INJECT_EEIM			(0xff000000>>24)	/* ECC Erroe Injection Enable */
 #define ECC_ERR_INJECT_EEIM_SHIFT		0
 	u8 res5[0x14];
-	u32 capture_data_hi;    /**< Memory Data Path Read Capture High */
-	u32 capture_data_lo;    /**< Memory Data Path Read Capture Low */
-	u32 capture_ecc;        /**< Memory Data Path Read Capture ECC */
+	u32 capture_data_hi;	/**< Memory Data Path Read Capture High */
+	u32 capture_data_lo;	/**< Memory Data Path Read Capture Low */
+	u32 capture_ecc;	/**< Memory Data Path Read Capture ECC */
 #define CAPTURE_ECC_ECE				(0xff000000>>24)
 #define CAPTURE_ECC_ECE_SHIFT			0
 	u8 res6[0x14];
-	u32 err_detect;         /**< Memory Error Detect */
-#define ECC_ERROR_DETECT_MME			(0x80000000>>0)		/* Multiple Memory Errors */
+	u32 err_detect;		/**< Memory Error Detect */
+#define ECC_ERROR_DETECT_MME			(0x80000000>>0)	/* Multiple Memory Errors */
 #define ECC_ERROR_DETECT_MBE			(0x80000000>>28)	/* Multiple-Bit Error */
 #define ECC_ERROR_DETECT_SBE			(0x80000000>>29)	/* Single-Bit ECC Error Pickup */
 #define ECC_ERROR_DETECT_MSE			(0x80000000>>31)	/* Memory Select Error */
-	u32 err_disable;        /**< Memory Error Disable */
+	u32 err_disable;	/**< Memory Error Disable */
 #define ECC_ERROR_DISABLE_MBED			(0x80000000>>28)	/* Multiple-Bit ECC Error Disable */
 #define ECC_ERROR_DISABLE_SBED			(0x80000000>>29)	/* Sinle-Bit ECC Error disable */
 #define ECC_ERROR_DISABLE_MSED			(0x80000000>>31)	/* Memory Select Error Disable */
 #define ECC_ERROR_ENABLE			~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED)
-	u32 err_int_en;         /**< Memory Error Interrupt Enable */
+	u32 err_int_en;		/**< Memory Error Interrupt Enable */
 #define ECC_ERR_INT_EN_MBEE			(0x80000000>>28)	/* Multiple-Bit ECC Error Interrupt Enable */
 #define ECC_ERR_INT_EN_SBEE			(0x80000000>>29)	/* Single-Bit ECC Error Interrupt Enable */
 #define ECC_ERR_INT_EN_MSEE			(0x80000000>>31)	/* Memory Select Error Interrupt Enable */
 #define ECC_ERR_INT_DISABLE			~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE)
-	u32 capture_attributes; /**< Memory Error Attributes Capture */
-#define ECC_CAPT_ATTR_BNUM			(0xe0000000>>1)		/* Data Beat Num */
+	u32 capture_attributes;	/**< Memory Error Attributes Capture */
+#define ECC_CAPT_ATTR_BNUM			(0xe0000000>>1)	/* Data Beat Num */
 #define ECC_CAPT_ATTR_BNUM_SHIFT		28
-#define ECC_CAPT_ATTR_TSIZ			(0xc0000000>>6)		/* Transaction Size */
+#define ECC_CAPT_ATTR_TSIZ			(0xc0000000>>6)	/* Transaction Size */
 #define ECC_CAPT_ATTR_TSIZ_FOUR_DW		0
 #define ECC_CAPT_ATTR_TSIZ_ONE_DW		1
 #define ECC_CAPT_ATTR_TSIZ_TWO_DW		2
@@ -738,73 +1081,72 @@ typedef struct ddr8349{
 #define ECC_CAPT_ATTR_TTYP_R_M_W		0x3
 #define ECC_CAPT_ATTR_TTYP_SHIFT		12
 #define ECC_CAPT_ATTR_VLD			(0x80000000>>31)	/* Valid */
-	u32 capture_address;    /**< Memory Error Address Capture */
+	u32 capture_address;	/**< Memory Error Address Capture */
 	u32 capture_ext_address;/**< Memory Error Extended Address Capture */
-	u32 err_sbe;            /**< Memory Single-Bit ECC Error Management */
-#define ECC_ERROR_MAN_SBET			(0xff000000>>8)		/* Single-Bit Error Threshold 0..255*/
+	u32 err_sbe;		/**< Memory Single-Bit ECC Error Management */
+#define ECC_ERROR_MAN_SBET			(0xff000000>>8)	/* Single-Bit Error Threshold 0..255 */
 #define ECC_ERROR_MAN_SBET_SHIFT		16
-#define ECC_ERROR_MAN_SBEC			(0xff000000>>24)	/* Single Bit Error Counter 0..255*/
+#define ECC_ERROR_MAN_SBEC			(0xff000000>>24)	/* Single Bit Error Counter 0..255 */
 #define ECC_ERROR_MAN_SBEC_SHIFT		0
 	u8 res7[0xA4];
 	u32 debug_reg;
 	u8 res8[0xFC];
-} ddr8349_t;
+} ddr83xx_t;
 
 /*
  * I2C1 Controller
  */
 
-
 /*
  * DUART
  */
-typedef struct duart8349{
+typedef struct duart83xx {
 	u8 urbr_ulcr_udlb; /**< combined register for URBR, UTHR and UDLB */
-	u8 uier_udmb;      /**< combined register for UIER and UDMB */
+	u8 uier_udmb;	   /**< combined register for UIER and UDMB */
 	u8 uiir_ufcr_uafr; /**< combined register for UIIR, UFCR and UAFR */
-	u8 ulcr;        /**< line control register */
-	u8 umcr;        /**< MODEM control register */
-	u8 ulsr;        /**< line status register */
-	u8 umsr;        /**< MODEM status register */
-	u8 uscr;        /**< scratch register */
+	u8 ulcr;	/**< line control register */
+	u8 umcr;	/**< MODEM control register */
+	u8 ulsr;	/**< line status register */
+	u8 umsr;	/**< MODEM status register */
+	u8 uscr;	/**< scratch register */
 	u8 res0[8];
-	u8 udsr;        /**< DMA status register */
+	u8 udsr;	/**< DMA status register */
 	u8 res1[3];
 	u8 res2[0xEC];
-} duart8349_t;
+} duart83xx_t;
 
 /*
  * Local Bus Controller Registers
  */
-typedef struct lbus_bank{
-	u32 br;             /**< Base Register  */
-	u32 or;             /**< Base Register  */
+typedef struct lbus_bank {
+	u32 br;		    /**< Base Register  */
+	u32 or;		    /**< Base Register  */
 } lbus_bank_t;
 
-typedef struct lbus8349 {
+typedef struct lbus83xx {
 	lbus_bank_t bank[8];
 	u8 res0[0x28];
-	u32 mar;                /**< UPM Address Register */
+	u32 mar;		/**< UPM Address Register */
 	u8 res1[0x4];
-	u32 mamr;               /**< UPMA Mode Register */
-	u32 mbmr;               /**< UPMB Mode Register */
-	u32 mcmr;               /**< UPMC Mode Register */
+	u32 mamr;		/**< UPMA Mode Register */
+	u32 mbmr;		/**< UPMB Mode Register */
+	u32 mcmr;		/**< UPMC Mode Register */
 	u8 res2[0x8];
-	u32 mrtpr;              /**< Memory Refresh Timer Prescaler Register */
-	u32 mdr;                /**< UPM Data Register */
+	u32 mrtpr;		/**< Memory Refresh Timer Prescaler Register */
+	u32 mdr;		/**< UPM Data Register */
 	u8 res3[0x8];
-	u32 lsdmr;              /**< SDRAM Mode Register */
+	u32 lsdmr;		/**< SDRAM Mode Register */
 	u8 res4[0x8];
-	u32 lurt;               /**< UPM Refresh Timer */
-	u32 lsrt;               /**< SDRAM Refresh Timer */
+	u32 lurt;		/**< UPM Refresh Timer */
+	u32 lsrt;		/**< SDRAM Refresh Timer */
 	u8 res5[0x8];
-	u32 ltesr;              /**< Transfer Error Status Register */
-	u32 ltedr;              /**< Transfer Error Disable Register */
-	u32 lteir;              /**< Transfer Error Interrupt Register */
-	u32 lteatr;             /**< Transfer Error Attributes Register */
-	u32 ltear;              /**< Transfer Error Address Register */
+	u32 ltesr;		/**< Transfer Error Status Register */
+	u32 ltedr;		/**< Transfer Error Disable Register */
+	u32 lteir;		/**< Transfer Error Interrupt Register */
+	u32 lteatr;		/**< Transfer Error Attributes Register */
+	u32 ltear;		/**< Transfer Error Address Register */
 	u8 res6[0xC];
-	u32 lbcr;               /**< Configuration Register */
+	u32 lbcr;		/**< Configuration Register */
 #define LBCR_LDIS  0x80000000
 #define LBCR_LDIS_SHIFT    31
 #define LBCR_BCTLC 0x00C00000
@@ -815,7 +1157,7 @@ typedef struct lbus8349 {
 #define LBCR_EPAR_SHIFT    16
 #define LBCR_BMT   0x0000FF00
 #define LBCR_BMT_SHIFT      8
-	u32 lcrr;               /**< Clock Ratio Register */
+	u32 lcrr;		/**< Clock Ratio Register */
 #define LCRR_DBYP    0x80000000
 #define LCRR_DBYP_SHIFT      31
 #define LCRR_BUFCMDC 0x30000000
@@ -827,120 +1169,119 @@ typedef struct lbus8349 {
 #define LCRR_CLKDIV  0x0000000F
 #define LCRR_CLKDIV_SHIFT     0
 
-
 	u8 res7[0x28];
 	u8 res8[0xF00];
-} lbus8349_t;
+} lbus83xx_t;
 
+#if defined (CONFIG_MPC8349)
 /*
  * Serial Peripheral Interface
  */
-typedef struct spi8349
-{
+typedef struct spi83xx {
 	u32 mode;     /**< mode register  */
 	u32 event;    /**< event register */
 	u32 mask;     /**< mask register  */
 	u32 com;      /**< command register */
 	u8 res0[0x10];
-	u32 tx;       /**< transmit register */
-	u32 rx;       /**< receive register */
+	u32 tx;	      /**< transmit register */
+	u32 rx;	      /**< receive register */
 	u8 res1[0xD8];
-} spi8349_t;
-
+} spi83xx_t;
+#endif
 
 /*
  * DMA/Messaging Unit
  */
-typedef struct dma8349 {
-	u32 res0[0xC];	/* 0x0-0x29 reseverd */
-	u32 omisr;	/* 0x30 Outbound message interrupt status register */
-	u32 omimr;	/* 0x34 Outbound message interrupt mask register */
-	u32 res1[0x6];	/* 0x38-0x49 reserved */
-
-	u32 imr0;	/* 0x50 Inbound message register 0 */
-	u32 imr1;	/* 0x54 Inbound message register 1 */
-	u32 omr0;	/* 0x58 Outbound message register 0 */
-	u32 omr1;	/* 0x5C Outbound message register 1 */
-
-	u32 odr;	/* 0x60 Outbound doorbell register */
-	u32 res2;	/* 0x64-0x67 reserved */
-	u32 idr;	/* 0x68 Inbound doorbell register */
-	u32 res3[0x5];	/* 0x6C-0x79 reserved */
-
-	u32 imisr;	/* 0x80 Inbound message interrupt status register */
-	u32 imimr;	/* 0x84 Inbound message interrupt mask register */
-	u32 res4[0x1E];	/* 0x88-0x99 reserved */
-
-	u32 dmamr0;	/* 0x100 DMA 0 mode register */
-	u32 dmasr0;	/* 0x104 DMA 0 status register */
-	u32 dmacdar0;	/* 0x108 DMA 0 current descriptor address register */
-	u32 res5;	/* 0x10C reserved */
-	u32 dmasar0;	/* 0x110 DMA 0 source address register */
-	u32 res6;	/* 0x114 reserved */
-	u32 dmadar0;	/* 0x118 DMA 0 destination address register */
-	u32 res7;	/* 0x11C reserved */
-	u32 dmabcr0;	/* 0x120 DMA 0 byte count register */
-	u32 dmandar0;	/* 0x124 DMA 0 next descriptor address register */
-	u32 res8[0x16];	/* 0x128-0x179 reserved */
-
-	u32 dmamr1;	/* 0x180 DMA 1 mode register */
-	u32 dmasr1;	/* 0x184 DMA 1 status register */
-	u32 dmacdar1;	/* 0x188 DMA 1 current descriptor address register */
-	u32 res9;	/* 0x18C reserved */
-	u32 dmasar1;	/* 0x190 DMA 1 source address register */
-	u32 res10;	/* 0x194 reserved */
-	u32 dmadar1;	/* 0x198 DMA 1 destination address register */
-	u32 res11;	/* 0x19C reserved */
-	u32 dmabcr1;	/* 0x1A0 DMA 1 byte count register */
-	u32 dmandar1;	/* 0x1A4 DMA 1 next descriptor address register */
-	u32 res12[0x16];/* 0x1A8-0x199 reserved */
-
-	u32 dmamr2;	/* 0x200 DMA 2 mode register */
-	u32 dmasr2;	/* 0x204 DMA 2 status register */
-	u32 dmacdar2;	/* 0x208 DMA 2 current descriptor address register */
-	u32 res13;	/* 0x20C reserved */
-	u32 dmasar2;	/* 0x210 DMA 2 source address register */
-	u32 res14;	/* 0x214 reserved */
-	u32 dmadar2;	/* 0x218 DMA 2 destination address register */
-	u32 res15;	/* 0x21C reserved */
-	u32 dmabcr2;	/* 0x220 DMA 2 byte count register */
-	u32 dmandar2;	/* 0x224 DMA 2 next descriptor address register */
-	u32 res16[0x16];/* 0x228-0x279 reserved */
-
-	u32 dmamr3;	/* 0x280 DMA 3 mode register */
-	u32 dmasr3;	/* 0x284 DMA 3 status register */
-	u32 dmacdar3;	/* 0x288 DMA 3 current descriptor address register */
-	u32 res17;	/* 0x28C reserved */
-	u32 dmasar3;	/* 0x290 DMA 3 source address register */
-	u32 res18;	/* 0x294 reserved */
-	u32 dmadar3;	/* 0x298 DMA 3 destination address register */
-	u32 res19;	/* 0x29C reserved */
-	u32 dmabcr3;	/* 0x2A0 DMA 3 byte count register */
-	u32 dmandar3;	/* 0x2A4 DMA 3 next descriptor address register */
-
-	u32 dmagsr;	/* 0x2A8 DMA general status register */
-	u32 res20[0x15];/* 0x2AC-0x2FF reserved */
-} dma8349_t;
+typedef struct dma83xx {
+	u32 res0[0xC];		/* 0x0-0x29 reseverd */
+	u32 omisr;		/* 0x30 Outbound message interrupt status register */
+	u32 omimr;		/* 0x34 Outbound message interrupt mask register */
+	u32 res1[0x6];		/* 0x38-0x49 reserved */
+
+	u32 imr0;		/* 0x50 Inbound message register 0 */
+	u32 imr1;		/* 0x54 Inbound message register 1 */
+	u32 omr0;		/* 0x58 Outbound message register 0 */
+	u32 omr1;		/* 0x5C Outbound message register 1 */
+
+	u32 odr;		/* 0x60 Outbound doorbell register */
+	u32 res2;		/* 0x64-0x67 reserved */
+	u32 idr;		/* 0x68 Inbound doorbell register */
+	u32 res3[0x5];		/* 0x6C-0x79 reserved */
+
+	u32 imisr;		/* 0x80 Inbound message interrupt status register */
+	u32 imimr;		/* 0x84 Inbound message interrupt mask register */
+	u32 res4[0x1E];		/* 0x88-0x99 reserved */
+
+	u32 dmamr0;		/* 0x100 DMA 0 mode register */
+	u32 dmasr0;		/* 0x104 DMA 0 status register */
+	u32 dmacdar0;		/* 0x108 DMA 0 current descriptor address register */
+	u32 res5;		/* 0x10C reserved */
+	u32 dmasar0;		/* 0x110 DMA 0 source address register */
+	u32 res6;		/* 0x114 reserved */
+	u32 dmadar0;		/* 0x118 DMA 0 destination address register */
+	u32 res7;		/* 0x11C reserved */
+	u32 dmabcr0;		/* 0x120 DMA 0 byte count register */
+	u32 dmandar0;		/* 0x124 DMA 0 next descriptor address register */
+	u32 res8[0x16];		/* 0x128-0x179 reserved */
+
+	u32 dmamr1;		/* 0x180 DMA 1 mode register */
+	u32 dmasr1;		/* 0x184 DMA 1 status register */
+	u32 dmacdar1;		/* 0x188 DMA 1 current descriptor address register */
+	u32 res9;		/* 0x18C reserved */
+	u32 dmasar1;		/* 0x190 DMA 1 source address register */
+	u32 res10;		/* 0x194 reserved */
+	u32 dmadar1;		/* 0x198 DMA 1 destination address register */
+	u32 res11;		/* 0x19C reserved */
+	u32 dmabcr1;		/* 0x1A0 DMA 1 byte count register */
+	u32 dmandar1;		/* 0x1A4 DMA 1 next descriptor address register */
+	u32 res12[0x16];	/* 0x1A8-0x199 reserved */
+
+	u32 dmamr2;		/* 0x200 DMA 2 mode register */
+	u32 dmasr2;		/* 0x204 DMA 2 status register */
+	u32 dmacdar2;		/* 0x208 DMA 2 current descriptor address register */
+	u32 res13;		/* 0x20C reserved */
+	u32 dmasar2;		/* 0x210 DMA 2 source address register */
+	u32 res14;		/* 0x214 reserved */
+	u32 dmadar2;		/* 0x218 DMA 2 destination address register */
+	u32 res15;		/* 0x21C reserved */
+	u32 dmabcr2;		/* 0x220 DMA 2 byte count register */
+	u32 dmandar2;		/* 0x224 DMA 2 next descriptor address register */
+	u32 res16[0x16];	/* 0x228-0x279 reserved */
+
+	u32 dmamr3;		/* 0x280 DMA 3 mode register */
+	u32 dmasr3;		/* 0x284 DMA 3 status register */
+	u32 dmacdar3;		/* 0x288 DMA 3 current descriptor address register */
+	u32 res17;		/* 0x28C reserved */
+	u32 dmasar3;		/* 0x290 DMA 3 source address register */
+	u32 res18;		/* 0x294 reserved */
+	u32 dmadar3;		/* 0x298 DMA 3 destination address register */
+	u32 res19;		/* 0x29C reserved */
+	u32 dmabcr3;		/* 0x2A0 DMA 3 byte count register */
+	u32 dmandar3;		/* 0x2A4 DMA 3 next descriptor address register */
+
+	u32 dmagsr;		/* 0x2A8 DMA general status register */
+	u32 res20[0x15];	/* 0x2AC-0x2FF reserved */
+} dma83xx_t;
 
 /* DMAMRn bits */
-#define DMA_CHANNEL_START			(0x00000001)		/* Bit - DMAMRn CS */
-#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	(0x00000004)		/* Bit - DMAMRn CTM */
-#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	(0x00001000)		/* Bit - DMAMRn SAHE */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	(0x00000000)		/* 2Bit- DMAMRn SAHTS 1byte */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	(0x00004000)		/* 2Bit- DMAMRn SAHTS 2bytes */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	(0x00008000)		/* 2Bit- DMAMRn SAHTS 4bytes */
-#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	(0x0000c000)		/* 2Bit- DMAMRn SAHTS 8bytes */
-#define DMA_CHANNEL_SNOOP			(0x00010000)		/* Bit - DMAMRn DMSEN */
+#define DMA_CHANNEL_START			(0x00000001)	/* Bit - DMAMRn CS */
+#define DMA_CHANNEL_TRANSFER_MODE_DIRECT	(0x00000004)	/* Bit - DMAMRn CTM */
+#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN	(0x00001000)	/* Bit - DMAMRn SAHE */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B	(0x00000000)	/* 2Bit- DMAMRn SAHTS 1byte */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B	(0x00004000)	/* 2Bit- DMAMRn SAHTS 2bytes */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B	(0x00008000)	/* 2Bit- DMAMRn SAHTS 4bytes */
+#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B	(0x0000c000)	/* 2Bit- DMAMRn SAHTS 8bytes */
+#define DMA_CHANNEL_SNOOP			(0x00010000)	/* Bit - DMAMRn DMSEN */
 
 /* DMASRn bits */
-#define DMA_CHANNEL_BUSY 			(0x00000004)		/* Bit - DMASRn CB */
-#define DMA_CHANNEL_TRANSFER_ERROR		(0x00000080)		/* Bit - DMASRn TE */
+#define DMA_CHANNEL_BUSY 			(0x00000004)	/* Bit - DMASRn CB */
+#define DMA_CHANNEL_TRANSFER_ERROR		(0x00000080)	/* Bit - DMASRn TE */
 
 /*
  * PCI Software Configuration Registers
  */
-typedef struct pciconf8349 {
-	u32	config_address;
+typedef struct pciconf83xx {
+	u32 config_address;
 #define PCI_CONFIG_ADDRESS_EN	0x80000000
 #define PCI_CONFIG_ADDRESS_BN_SHIFT	16
 #define PCI_CONFIG_ADDRESS_BN_MASK	0x00ff0000
@@ -952,31 +1293,32 @@ typedef struct pciconf8349 {
 #define PCI_CONFIG_ADDRESS_RN_MASK	0x000000fc
 	u32 config_data;
 	u32 int_ack;
-	u8	res[116];
-} pciconf8349_t;
+	u8 res[116];
+} pciconf83xx_t;
 
 /*
  * PCI Outbound Translation Register
  */
 typedef struct pci_outbound_window {
-	u32	potar;
-	u8	res0[4];
-	u32	pobar;
-	u8	res1[4];
-	u32	pocmr;
-	u8	res2[4];
-} pot8349_t;
+	u32 potar;
+	u8 res0[4];
+	u32 pobar;
+	u8 res1[4];
+	u32 pocmr;
+	u8 res2[4];
+} pot83xx_t;
+
 /*
  * Sequencer
  */
-typedef struct ios8349 {
-	pot8349_t	pot[6];
+typedef struct ios83xx {
+	pot83xx_t pot[6];
 #define POTAR_TA_MASK	0x000fffff
 #define	POBAR_BA_MASK	0x000fffff
 #define	POCMR_EN	0x80000000
 #define	POCMR_IO	0x40000000	/* 0--memory space 1--I/O space */
 #define	POCMR_SE	0x20000000	/* streaming enable */
-#define	POCMR_DST	0x10000000	/* 0--PCI1 1--PCI2*/
+#define	POCMR_DST	0x10000000	/* 0--PCI1 1--PCI2 */
 #define	POCMR_CM_MASK	0x000fffff
 #define	POCMR_CM_4G	0x00000000
 #define	POCMR_CM_2G	0x00080000
@@ -999,18 +1341,18 @@ typedef struct ios8349 {
 #define	POCMR_CM_16K	0x000FFFFC
 #define	POCMR_CM_8K	0x000FFFFE
 #define	POCMR_CM_4K	0x000FFFFF
-	u8	res0[0x60];
-	u32	pmcr;
-	u8	res1[4];
-	u32	dtcr;
-	u8	res2[4];
-} ios8349_t;
+	u8 res0[0x60];
+	u32 pmcr;
+	u8 res1[4];
+	u32 dtcr;
+	u8 res2[4];
+} ios83xx_t;
 
 /*
  * PCI Controller Control and Status Registers
  */
-typedef struct pcictrl8349 {
-	u32	esr;
+typedef struct pcictrl83xx {
+	u32 esr;
 #define ESR_MERR	0x80000000
 #define ESR_APAR	0x00000400
 #define	ESR_PCISERR	0x00000200
@@ -1018,7 +1360,7 @@ typedef struct pcictrl8349 {
 #define	ESR_TPERR	0x00000080
 #define	ESR_NORSP	0x00000040
 #define	ESR_TABT	0x00000020
-	u32	ecdr;
+	u32 ecdr;
 #define ECDR_APAR	0x00000400
 #define	ECDR_PCISERR	0x00000200
 #define	ECDR_MPERR	0x00000100
@@ -1032,7 +1374,7 @@ typedef struct pcictrl8349 {
 #define	EER_TPERR	0x00000080
 #define	EER_NORSP	0x00000040
 #define	EER_TABT	0x00000020
-	u32	eatcr;
+	u32 eatcr;
 #define	EATCR_ERRTYPR_MASK	0x70000000
 #define	EATCR_ERRTYPR_APR	0x00000000	/* address parity error */
 #define	EATCR_ERRTYPR_WDPR	0x10000000	/* write data parity error */
@@ -1061,37 +1403,46 @@ typedef struct pcictrl8349 {
 #define	EATCR_ES_EM		0x00000000	/* external master */
 #define	EATCR_ES_DMA		0x00050000
 #define	EATCR_CMD_MASK		0x0000f000
-#define	EATCR_HBE_MASK		0x00000f00	/* PCI high byte enable*/
+#if defined (CONFIG_MPC8349)
+#define	EATCR_HBE_MASK		0x00000f00	/* PCI high byte enable */
+#endif
 #define	EATCR_BE_MASK		0x000000f0	/* PCI byte enable */
+#if defined (CONFIG_MPC8349)
 #define	EATCR_HPB		0x00000004	/* high parity bit */
-#define	EATCR_PB		0x00000002	/* parity bit*/
+#endif
+#define	EATCR_PB		0x00000002	/* parity bit */
 #define	EATCR_VI		0x00000001	/* error information valid */
-	u32	eacr;
-	u32	eeacr;
-	u32	edlcr;
-	u32	edhcr;
-	u32	gcr;
-	u32	ecr;
-	u32	gsr;
-	u8	res0[12];
-	u32	pitar2;
-	u8	res1[4];
-	u32	pibar2;
-	u32	piebar2;
-	u32	piwar2;
-	u8	res2[4];
-	u32	pitar1;
-	u8	res3[4];
-	u32	pibar1;
-	u32	piebar1;
-	u32	piwar1;
-	u8	res4[4];
-	u32	pitar0;
-	u8	res5[4];
-	u32	pibar0;
-	u8	res6[4];
-	u32	piwar0;
-	u8	res7[132];
+	u32 eacr;
+	u32 eeacr;
+#if defined (CONFIG_MPC8349)
+	u32 edlcr;
+	u32 edhcr;
+#elif defined (CONFIG_MPC8360)
+	u32 edcr;		/* was edlcr */
+	u8 res_edcr[0x4];
+#endif
+	u32 gcr;
+	u32 ecr;
+	u32 gsr;
+	u8 res0[12];
+	u32 pitar2;
+	u8 res1[4];
+	u32 pibar2;
+	u32 piebar2;
+	u32 piwar2;
+	u8 res2[4];
+	u32 pitar1;
+	u8 res3[4];
+	u32 pibar1;
+	u32 piebar1;
+	u32 piwar1;
+	u8 res4[4];
+	u32 pitar0;
+	u8 res5[4];
+	u32 pibar0;
+	u8 res6[4];
+	u32 piwar0;
+	u8 res7[132];
 #define PITAR_TA_MASK		0x000fffff
 #define PIBAR_MASK		0xffffffff
 #define PIEBAR_EBA_MASK		0x000fffff
@@ -1124,63 +1475,606 @@ typedef struct pcictrl8349 {
 #define	PIWAR_IWS_512M	0x0000001C
 #define	PIWAR_IWS_1G	0x0000001D
 #define	PIWAR_IWS_2G	0x0000001E
-} pcictrl8349_t;
+} pcictrl83xx_t;
 
+#if defined (CONFIG_MPC8349)
 /*
  * USB
  */
-typedef struct usb8349 {
+typedef struct usb83xx {
 	u8 fixme[0x2000];
-} usb8349_t;
+} usb83xx_t;
 
 /*
  * TSEC
  */
-typedef struct tsec8349 {
+typedef struct tsec83xx {
 	u8 fixme[0x1000];
-} tsec8349_t;
+} tsec83xx_t;
+#endif
 
 /*
  * Security
  */
-typedef struct security8349 {
+typedef struct security83xx {
 	u8 fixme[0x10000];
-} security8349_t;
+} security83xx_t;
+
+#if defined (CONFIG_MPC8360)
+/*
+ * iram
+ */
+typedef struct iram83xx {
+	u32 iadd;		/* I-RAM address register */
+	u32 idata;		/* I-RAM data register */
+	u8 res0[0x78];
+} iram83xx_t;
+
+/*
+ * Interrupt Controller
+ */
+typedef struct irq83xx {
+	u32 cicr;		/* QE system interrupt configuration */
+	u32 civec;		/* QE system interrupt vector register */
+	u32 cripnr;		/* QE RISC interrupt pending register */
+	u32 cipnr;		/*  QE system interrupt pending register */
+	u32 cipxcc;		/* QE interrupt priority register */
+	u32 cipycc;		/* QE interrupt priority register */
+	u32 cipwcc;		/* QE interrupt priority register */
+	u32 cipzcc;		/* QE interrupt priority register */
+	u32 cimr;		/* QE system interrupt mask register */
+	u32 crimr;		/* QE RISC interrupt mask register */
+	u32 cicnr;		/* QE system interrupt control register */
+	u8 res0[0x4];
+	u32 ciprta;		/* QE system interrupt priority register for RISC tasks A */
+	u32 ciprtb;		/* QE system interrupt priority register for RISC tasks B */
+	u8 res1[0x4];
+	u32 cricr;		/* QE system RISC interrupt control */
+	u8 res2[0x20];
+	u32 chivec;		/* QE high system interrupt vector */
+	u8 res3[0x1C];
+} irq83xx_t;
+
+/*
+ * Communications Processor
+ */
+typedef struct cp83xx {
+	u32 cecr;		/* QE command register */
+	u32 ceccr;		/* QE controller configuration register */
+	u32 cecdr;		/* QE command data register */
+	u8 res0[0xA];
+	u16 ceter;		/* QE timer event register */
+	u8 res1[0x2];
+	u16 cetmr;		/* QE timers mask register */
+	u32 cetscr;		/* QE time-stamp timer control register */
+	u32 cetsr1;		/* QE time-stamp register 1 */
+	u32 cetsr2;		/* QE time-stamp register 2 */
+	u8 res2[0x8];
+	u32 cevter;		/* QE virtual tasks event register */
+	u32 cevtmr;		/* QE virtual tasks mask register */
+	u16 cercr;		/* QE RAM control register */
+	u8 res3[0x2];
+	u8 res4[0x24];
+	u16 ceexe1;		/* QE external request 1 event register */
+	u8 res5[0x2];
+	u16 ceexm1;		/* QE external request 1 mask register */
+	u8 res6[0x2];
+	u16 ceexe2;		/* QE external request 2 event register */
+	u8 res7[0x2];
+	u16 ceexm2;		/* QE external request 2 mask register */
+	u8 res8[0x2];
+	u16 ceexe3;		/* QE external request 3 event register */
+	u8 res9[0x2];
+	u16 ceexm3;		/* QE external request 3 mask register */
+	u8 res10[0x2];
+	u16 ceexe4;		/* QE external request 4 event register */
+	u8 res11[0x2];
+	u16 ceexm4;		/* QE external request 4 mask register */
+	u8 res12[0x2];
+	u8 res13[0x280];
+} cp83xx_t;
+
+/*
+ * QE Multiplexer
+ */
+
+typedef struct qmx83xx {
+	u32 cmxgcr;		/* CMX general clock route register */
+	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register */
+	u32 cmxsi1cr_h;		/* CMX SI1 clock route high register */
+	u32 cmxsi1syr;		/* CMX SI1 SYNC route register */
+	u32 cmxucr1;		/* CMX UCC1, UCC3 clock route register */
+	u32 cmxucr2;		/* CMX UCC5, UCC7 clock route register */
+	u32 cmxucr3;		/* CMX UCC2, UCC4 clock route register */
+	u32 cmxucr4;		/* CMX UCC6, UCC8 clock route register */
+	u32 cmxupcr;		/* CMX UPC clock route register */
+	u8 res0[0x1C];
+} qmx83xx_t;
+
+/*
+* QE Timers
+*/
+
+typedef struct qet83xx {
+	u8 gtcfr1;		/* Timer 1 and Timer 2 global configuration register */
+	u8 res0[0x3];
+	u8 gtcfr2;		/* Timer 3 and timer 4 global configuration register */
+	u8 res1[0xB];
+	u16 gtmdr1;		/* Timer 1 mode register */
+	u16 gtmdr2;		/* Timer 2 mode register */
+	u16 gtrfr1;		/* Timer 1 reference register */
+	u16 gtrfr2;		/* Timer 2 reference register */
+	u16 gtcpr1;		/* Timer 1 capture register */
+	u16 gtcpr2;		/* Timer 2 capture register */
+	u16 gtcnr1;		/* Timer 1 counter */
+	u16 gtcnr2;		/* Timer 2 counter */
+	u16 gtmdr3;		/* Timer 3 mode register */
+	u16 gtmdr4;		/* Timer 4 mode register */
+	u16 gtrfr3;		/* Timer 3 reference register */
+	u16 gtrfr4;		/* Timer 4 reference register */
+	u16 gtcpr3;		/* Timer 3 capture register */
+	u16 gtcpr4;		/* Timer 4 capture register */
+	u16 gtcnr3;		/* Timer 3 counter */
+	u16 gtcnr4;		/* Timer 4 counter */
+	u16 gtevr1;		/* Timer 1 event register */
+	u16 gtevr2;		/* Timer 2 event register */
+	u16 gtevr3;		/* Timer 3 event register */
+	u16 gtevr4;		/* Timer 4 event register */
+	u16 gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} qet83xx_t;
+
+/*
+* spi
+*/
+
+typedef struct spi83xx {
+	u8 res0[0x20];
+	u32 spmode;		/* SPI mode register */
+	u8 res1[0x2];
+	u8 spie;		/* SPI event register */
+	u8 res2[0x1];
+	u8 res3[0x2];
+	u8 spim;		/* SPI mask register */
+	u8 res4[0x1];
+	u8 res5[0x1];
+	u8 spcom;		/* SPI command register  */
+	u8 res6[0x2];
+	u32 spitd;		/* SPI transmit data register (cpu mode) */
+	u32 spird;		/* SPI receive data register (cpu mode) */
+	u8 res7[0x8];
+} spi83xx_t;
+
+/*
+* mcc
+*/
+
+typedef struct mcc83xx {
+	u32 mcce;		/* MCC event register */
+	u32 mccm;		/* MCC mask register */
+	u32 mccf;		/* MCC configuration register */
+	u32 merl;		/* MCC emergency request level register */
+	u8 res0[0xF0];
+} mcc83xx_t;
+
+/*
+* brg
+*/
+
+typedef struct brg83xx {
+	u32 brgc1;		/* BRG1 configuration register */
+	u32 brgc2;		/* BRG2 configuration register */
+	u32 brgc3;		/* BRG3 configuration register */
+	u32 brgc4;		/* BRG4 configuration register */
+	u32 brgc5;		/* BRG5 configuration register */
+	u32 brgc6;		/* BRG6 configuration register */
+	u32 brgc7;		/* BRG7 configuration register */
+	u32 brgc8;		/* BRG8 configuration register */
+	u32 brgc9;		/* BRG9 configuration register */
+	u32 brgc10;		/* BRG10 configuration register */
+	u32 brgc11;		/* BRG11 configuration register */
+	u32 brgc12;		/* BRG12 configuration register */
+	u32 brgc13;		/* BRG13 configuration register */
+	u32 brgc14;		/* BRG14 configuration register */
+	u32 brgc15;		/* BRG15 configuration register */
+	u32 brgc16;		/* BRG16 configuration register */
+	u8 res0[0x40];
+} brg83xx_t;
+
+/*
+* USB
+*/
+
+typedef struct usb83xx {
+	u8 usmod;		/* USB mode register */
+	u8 usadd;		/* USB address register */
+	u8 uscom;		/* USB command register */
+	u8 res0[0x1];
+	u16 usep0;		/* USB endpoint register 0 */
+	u16 usep1;		/* USB endpoint register 1 */
+	u16 usep2;		/* USB endpoint register 2 */
+	u16 usep3;		/* USB endpoint register 3 */
+	u8 res1[0x4];
+	u16 usber;		/* USB event register */
+	u8 res2[0x2];
+	u16 usbmr;		/* USB mask register */
+	u8 res3[0x1];
+	u8 usbs;		/* USB status register */
+	u32 ussft;		/* USB start of frame timer */
+	u8 res4[0x24];
+} usb83xx_t;
+
+/*
+* SI
+*/
+
+typedef struct si1_83xx {
+	u16 siamr1;		/* SI1 TDMA mode register */
+	u16 sibmr1;		/* SI1 TDMB mode register */
+	u16 sicmr1;		/* SI1 TDMC mode register */
+	u16 sidmr1;		/* SI1 TDMD mode register */
+	u8 siglmr1_h;		/* SI1 global mode register high */
+	u8 res0[0x1];
+	u8 sicmdr1_h;		/* SI1 command register high */
+	u8 res2[0x1];
+	u8 sistr1_h;		/* SI1 status register high */
+	u8 res3[0x1];
+	u16 sirsr1_h;		/* SI1 RAM shadow address register high */
+	u8 sitarc1;		/* SI1 RAM counter Tx TDMA */
+	u8 sitbrc1;		/* SI1 RAM counter Tx TDMB */
+	u8 sitcrc1;		/* SI1 RAM counter Tx TDMC */
+	u8 sitdrc1;		/* SI1 RAM counter Tx TDMD */
+	u8 sirarc1;		/* SI1 RAM counter Rx TDMA */
+	u8 sirbrc1;		/* SI1 RAM counter Rx TDMB */
+	u8 sircrc1;		/* SI1 RAM counter Rx TDMC */
+	u8 sirdrc1;		/* SI1 RAM counter Rx TDMD */
+	u8 res4[0x8];
+	u16 siemr1;		/* SI1 TDME mode register 16 bits */
+	u16 sifmr1;		/* SI1 TDMF mode register 16 bits */
+	u16 sigmr1;		/* SI1 TDMG mode register 16 bits */
+	u16 sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8 siglmg1_l;		/* SI1 global mode register low 8 bits */
+	u8 res5[0x1];
+	u8 sicmdr1_l;		/* SI1 command register low 8 bits */
+	u8 res6[0x1];
+	u8 sistr1_l;		/* SI1 status register low 8 bits */
+	u8 res7[0x1];
+	u16 sirsr1_l;		/* SI1 RAM shadow address register low 16 bits */
+	u8 siterc1;		/* SI1 RAM counter Tx TDME 8 bits */
+	u8 sitfrc1;		/* SI1 RAM counter Tx TDMF 8 bits */
+	u8 sitgrc1;		/* SI1 RAM counter Tx TDMG 8 bits */
+	u8 sithrc1;		/* SI1 RAM counter Tx TDMH 8 bits */
+	u8 sirerc1;		/* SI1 RAM counter Rx TDME 8 bits */
+	u8 sirfrc1;		/* SI1 RAM counter Rx TDMF 8 bits */
+	u8 sirgrc1;		/* SI1 RAM counter Rx TDMG 8 bits */
+	u8 sirhrc1;		/* SI1 RAM counter Rx TDMH 8 bits */
+	u8 res8[0x8];
+	u32 siml1;		/* SI1 multiframe limit register */
+	u8 siedm1;		/* SI1 extended diagnostic mode register */
+	u8 res9[0xBB];
+} si1_83xx_t;
+
+/*
+*  SI Routing Tables
+*/
+
+typedef struct sir83xx {
+	u8 tx[0x400];
+	u8 rx[0x400];
+	u8 res0[0x800];
+} sir83xx_t;
+
+/*
+* ucc
+*/
+
+typedef struct uslow {
+	u32 gumr_l;		/* UCCx general mode register (low) */
+	u32 gumr_h;		/* UCCx general mode register (high) */
+	u16 upsmr;		/* UCCx protocol-specific mode register */
+	u8 res0[0x2];
+	u16 utodr;		/* UCCx transmit on demand register */
+	u16 udsr;		/* UCCx data synchronization register */
+	u16 ucce;		/* UCCx event register */
+	u8 res1[0x2];
+	u16 uccm;		/* UCCx mask register */
+	u8 res2[0x1];
+	u8 uccs;		/* UCCx status register */
+	u8 res3[0x1E8];
+} uslow_t;
+
+typedef struct ufast {
+	u32 gumr;		/* UCCx general mode register */
+	u32 upsmr;		/* UCCx protocol-specific mode register  */
+	u16 utodr;		/* UCCx transmit on demand register  */
+	u8 res0[0x2];
+	u16 udsr;		/* UCCx data synchronization register  */
+	u8 res1[0x2];
+	u32 ucce;		/* UCCx event register */
+	u32 uccm;		/* UCCx mask register.  */
+	u8 uccs;		/* UCCx status register */
+	u8 res2[0x7];
+	u32 urfb;		/* UCC receive FIFO base  */
+	u16 urfs;		/* UCC receive FIFO size  */
+	u8 res3[0x2];
+	u16 urfet;		/* UCC receive FIFO emergency threshold  */
+	u16 urfset;		/* UCC receive FIFO special emergency threshold  */
+	u32 utfb;		/* UCC transmit FIFO base */
+	u16 utfs;		/* UCC transmit FIFO size  */
+	u8 res4[0x2];
+	u16 utfet;		/* UCC transmit FIFO emergency threshold */
+	u8 res5[0x2];
+	u16 utftt;		/* UCC transmit FIFO transmit threshold */
+	u8 res6[0x2];
+	u16 utpt;		/* UCC transmit polling timer */
+	u32 urtry;		/* UCC retry counter register */
+	u8 res7[0x4C];
+	u8 guemr;		/* UCC general extended mode register */
+	u8 res8[0x3];
+	u8 res9[0x6C];
+	u32 maccfg1;		/* Mac configuration register #1  */
+	u32 maccfg2;		/* Mac configuration register #2  */
+	u16 ipgifg;		/* Interframe gap register  */
+	u8 res10[0x2];
+	u32 hafdup;		/* Half-duplex register  */
+	u8 res11[0xC];
+	u32 emtr;		/* Ethernet MAC test register  */
+	u32 miimcfg;		/* MII mgmt configuration register  */
+	u32 miimcom;		/* MII mgmt command register  */
+	u32 miimadd;		/* MII mgmt address register  */
+	u32 miimcon;		/* MII mgmt control register  */
+	u32 miistat;		/* MII mgmt status register */
+	u32 miimnd;		/* MII mgmt indication register */
+	u32 ifctl;		/* Interface control register  */
+	u32 ifstat;		/* Interface status register  */
+	u32 macstnaddr1;	/* Station address part 1 register */
+	u32 macstnaddr2;	/* Station address part 2 register */
+	u8 res12[0x8];
+	u32 uempr;		/* UCC Ethernet MAC parameter register */
+	u32 utbipa;		/* UCC TBI address */
+	u16 uescr;		/* UCC Ethernet statistics control register */
+	u8 res13[0x26];
+	u32 tx64;		/* Transmit and receive 64-byte frame counter */
+	u32 tx127;		/* Transmit and receive 65- to 127-byte frame counter */
+	u32 tx255;		/* Transmit and receive 128- to 255-byte frame counter */
+	u32 rx64;		/* Receive and receive 64-byte frame counter */
+	u32 rx127;		/* Receive and receive 65- to 127-byte frame counter */
+	u32 rx255;		/* Receive and receive 128- to 255-byte frame counter */
+	u32 txok;		/* Transmit good bytes counter */
+	u32 txcf;		/* Transmit control frame counter */
+	u32 tmca;		/* Transmit multicast control frame counter */
+	u32 tbca;		/* Transmit broadcast packet counter */
+	u32 rxfok;		/* Receive frame OK counter */
+	u32 rbyt;		/* Receive good and bad bytes counter */
+	u32 rxbok;		/* Receive bytes OK counter */
+	u32 rmca;		/* Receive multicast packet counter */
+	u32 rbca;		/* Receive broadcast packet counter */
+	u32 scar;		/* Statistics carry register */
+	u32 scam;		/* Statistics carry mask register */
+	u8 res14[0x3C];
+} ufast_t;
+
+typedef struct ucc83xx {
+	union {
+		uslow_t slow;
+		ufast_t fast;
+	};
+} ucc83xx_t;
+
+/*
+*  MultiPHY UTOPIA POS Controllers
+*/
+
+typedef struct upc83xx {
+	u32 upgcr;		/* UTOPIA/POS general configuration register  */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing: */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+	u32 uplpa;		/* UTOPIA/POS last PHY address */
+	u32 uphec;		/* ATM HEC register */
+	u32 upuc;		/* UTOPIA/POS UCC configuration */
+	u32 updc1;		/* UTOPIA/POS device 1 configuration */
+	u32 updc2;		/* UTOPIA/POS device 2 configuration  */
+	u32 updc3;		/* UTOPIA/POS device 3 configuration */
+	u32 updc4;		/* UTOPIA/POS device 4 configuration  */
+	u32 upstpa;		/* UTOPIA/POS STPA threshold  */
+	u8 res0[0xC];
+	u32 updrs1_h;		/* UTOPIA/POS device 1 rate select  */
+	u32 updrs1_l;		/* UTOPIA/POS device 1 rate select  */
+	u32 updrs2_h;		/* UTOPIA/POS device 2 rate select  */
+	u32 updrs2_l;		/* UTOPIA/POS device 2 rate select */
+	u32 updrs3_h;		/* UTOPIA/POS device 3 rate select */
+	u32 updrs3_l;		/* UTOPIA/POS device 3 rate select */
+	u32 updrs4_h;		/* UTOPIA/POS device 4 rate select */
+	u32 updrs4_l;		/* UTOPIA/POS device 4 rate select */
+	u32 updrp1;		/* UTOPIA/POS device 1 receive priority low  */
+	u32 updrp2;		/* UTOPIA/POS device 2 receive priority low  */
+	u32 updrp3;		/* UTOPIA/POS device 3 receive priority low  */
+	u32 updrp4;		/* UTOPIA/POS device 4 receive priority low  */
+	u32 upde1;		/* UTOPIA/POS device 1 event */
+	u32 upde2;		/* UTOPIA/POS device 2 event */
+	u32 upde3;		/* UTOPIA/POS device 3 event */
+	u32 upde4;		/* UTOPIA/POS device 4 event */
+	u16 uprp1;
+	u16 uprp2;
+	u16 uprp3;
+	u16 uprp4;
+	u8 res1[0x8];
+	u16 uptirr1_0;		/* Device 1 transmit internal rate 0 */
+	u16 uptirr1_1;		/* Device 1 transmit internal rate 1 */
+	u16 uptirr1_2;		/* Device 1 transmit internal rate 2 */
+	u16 uptirr1_3;		/* Device 1 transmit internal rate 3 */
+	u16 uptirr2_0;		/* Device 2 transmit internal rate 0 */
+	u16 uptirr2_1;		/* Device 2 transmit internal rate 1 */
+	u16 uptirr2_2;		/* Device 2 transmit internal rate 2 */
+	u16 uptirr2_3;		/* Device 2 transmit internal rate 3 */
+	u16 uptirr3_0;		/* Device 3 transmit internal rate 0 */
+	u16 uptirr3_1;		/* Device 3 transmit internal rate 1 */
+	u16 uptirr3_2;		/* Device 3 transmit internal rate 2 */
+	u16 uptirr3_3;		/* Device 3 transmit internal rate 3 */
+	u16 uptirr4_0;		/* Device 4 transmit internal rate 0 */
+	u16 uptirr4_1;		/* Device 4 transmit internal rate 1 */
+	u16 uptirr4_2;		/* Device 4 transmit internal rate 2 */
+	u16 uptirr4_3;		/* Device 4 transmit internal rate 3 */
+	u32 uper1;		/* Device 1 port enable register */
+	u32 uper2;		/* Device 2 port enable register */
+	u32 uper3;		/* Device 3 port enable register */
+	u32 uper4;		/* Device 4 port enable register */
+	u8 res2[0x150];
+} upc83xx_t;
+
+/*
+* SDMA
+*/
+
+typedef struct sdma83xx {
+	u32 sdsr;		/* Serial DMA status register */
+	u32 sdmr;		/* Serial DMA mode register */
+	u32 sdtr1;		/* SDMA system bus threshold register */
+	u32 sdtr2;		/* SDMA secondary bus threshold register */
+	u32 sdhy1;		/* SDMA system bus hysteresis register */
+	u32 sdhy2;		/* SDMA secondary bus hysteresis register */
+	u32 sdta1;		/* SDMA system bus address register */
+	u32 sdta2;		/* SDMA secondary bus address register */
+	u32 sdtm1;		/* SDMA system bus MSNUM register */
+	u32 sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8 res0[0x10];
+	u32 sdaqr;		/* SDMA address bus qualify register */
+	u32 sdaqmr;		/* SDMA address bus qualify mask register */
+	u8 res1[0x4];
+	u32 sdwbcr;		/* SDMA CAM entries base register */
+	u8 res2[0x38];
+} sdma83xx_t;
+
+/*
+* Debug Space
+*/
+
+typedef struct dbg83xx {
+	u32 bpdcr;		/* Breakpoint debug command register */
+	u32 bpdsr;		/* Breakpoint debug status register */
+	u32 bpdmr;		/* Breakpoint debug mask register */
+	u32 bprmrr0;		/* Breakpoint request mode risc register 0 */
+	u32 bprmrr1;		/* Breakpoint request mode risc register 1 */
+	u8 res0[0x8];
+	u32 bprmtr0;		/* Breakpoint request mode trb register 0 */
+	u32 bprmtr1;		/* Breakpoint request mode trb register 1 */
+	u8 res1[0x8];
+	u32 bprmir;		/* Breakpoint request mode immediate register */
+	u32 bprmsr;		/* Breakpoint request mode serial register */
+	u32 bpemr;		/* Breakpoint exit mode register */
+	u8 res2[0x48];
+} dbg83xx_t;
+
+/*
+*  RISC Special Registers (Trap and Breakpoint)
+*/
+
+typedef struct rsp83xx {
+	u8 fixme[0x100];
+} rsp83xx_t;
+#endif
 
 typedef struct immap {
-	sysconf8349_t sysconf; /* System configuration */
-	wdt8349_t     wdt;     /* Watch Dog Timer (WDT) Registers */
-	rtclk8349_t   rtc;     /* Real Time Clock Module Registers */
-	rtclk8349_t   pit;     /* Periodic Interval Timer */
-	gtm8349_t     gtm[2];  /* Global Timers Module */
-	ipic8349_t    ipic;    /* Integrated Programmable Interrupt Controller */
-	arbiter8349_t arbiter; /* System Arbiter Registers */
-	reset8349_t   reset;   /* Reset Module */
-	clk8349_t     clk;     /* System Clock Module */
-	pmc8349_t     pmc;     /* Power Management Control Module */
-	gpio8349_t    pgio[2]; /* general purpose I/O module */
+	sysconf83xx_t sysconf;	/* System configuration */
+	wdt83xx_t wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t rtc;	/* Real Time Clock Module Registers */
+	rtclk83xx_t pit;	/* Periodic Interval Timer */
+	gtm83xx_t gtm[2];	/* Global Timers Module */
+	ipic83xx_t ipic;	/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t arbiter;	/* System Arbiter Registers */
+	reset83xx_t reset;	/* Reset Module */
+	clk83xx_t clk;		/* System Clock Module */
+	pmc83xx_t pmc;		/* Power Management Control Module */
+#if defined (CONFIG_MPC8349)
+	gpio83xx_t pgio[2];	/* general purpose I/O module */
+#elif defined (CONFIG_MPC8360)
+	qepi83xx_t qepi;	/* QE Ports Interrupts Registers */
+#endif
 	u8 res0[0x200];
+#if defined (CONFIG_MPC8360)
+	u8 DLL_LBDDR[0x100];
+#endif
 	u8 DDL_DDR[0x100];
 	u8 DDL_LBIU[0x100];
+#if defined (CONFIG_MPC8349)
 	u8 res1[0xE00];
-	ddr8349_t     ddr;     /* DDR Memory Controller Memory */
-	i2c_t     i2c[2];      /* I2C1 Controller */
+#elif defined (CONFIG_MPC8360)
+	u8 res1[0x200];
+	gpio83xx_t gpio;	/* General purpose I/O module */
+	qesba83xx_t qesba;	/* QE Secondary Bus Access Windows */
+#endif
+	ddr83xx_t ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t i2c[2];	/* I2C Controllers */
 	u8 res2[0x1300];
-	duart8349_t   duart[2];/* DUART */
+	duart83xx_t duart[2];	/* DUART */
+#if defined (CONFIG_MPC8349)
 	u8 res3[0x900];
-	lbus8349_t    lbus;    /* Local Bus Controller Registers */
+	lbus83xx_t lbus;	/* Local Bus Controller Registers */
 	u8 res4[0x1000];
-	spi8349_t     spi;     /* Serial Peripheral Interface */
+	spi83xx_t spi;		/* Serial Peripheral Interface */
 	u8 res5[0xF00];
-	dma8349_t     dma;     /* DMA */
-	pciconf8349_t pci_conf[2];  /* PCI Software Configuration Registers */
-	ios8349_t     ios;     /* Sequencer */
-	pcictrl8349_t pci_ctrl[2];  /* PCI Controller Control and Status Registers */
+#elif defined (CONFIG_MPC8360)
+	u8 res3[0x900];
+	lbus83xx_t lbus;	/* Local Bus Controller */
+	u8 res4[0x2000];
+#endif
+	dma83xx_t dma;		/* DMA */
+#if defined (CONFIG_MPC8349)
+	pciconf83xx_t pci_conf[2];	/* PCI Software Configuration Registers */
+	ios83xx_t ios;		/* Sequencer */
+	pcictrl83xx_t pci_ctrl[2];	/* PCI Controller Control and Status Registers */
 	u8 res6[0x19900];
-	usb8349_t     usb;
-	tsec8349_t    tsec[2];
+	usb83xx_t usb;
+	tsec83xx_t tsec[2];
 	u8 res7[0xA000];
-	security8349_t security;
+	security83xx_t security;
+#elif defined (CONFIG_MPC8360)
+	pciconf83xx_t pci_conf[1];	/* PCI Software Configuration Registers */
+	u8 res_5[128];
+	ios83xx_t ios;		/* Sequencer (IOS) */
+	pcictrl83xx_t pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8 res6[0x4A00];
+	ddr83xx_t ddr_secondary;	/* Secondary DDR Memory Controller Memory Map */
+	u8 res7[0x22000];
+	security83xx_t security;
+	u8 res8[0xC0000];
+	iram83xx_t iram;	/* IRAM */
+	irq83xx_t irq;		/* Interrupt Controller */
+	cp83xx_t cp;		/* Communications Processor */
+	qmx83xx_t qmx;		/* QE Multiplexer */
+	qet83xx_t qet;		/* QE Timers */
+	spi83xx_t spi[0x2];	/* spi  */
+	mcc83xx_t mcc;		/* mcc */
+	brg83xx_t brg;		/* brg */
+	usb83xx_t usb;		/* USB */
+	si1_83xx_t si1;		/* SI */
+	u8 res9[0x800];
+	sir83xx_t sir;		/* SI Routing Tables  */
+	ucc83xx_t ucc1;		/* ucc1 */
+	ucc83xx_t ucc3;		/* ucc3 */
+	ucc83xx_t ucc5;		/* ucc5 */
+	ucc83xx_t ucc7;		/* ucc7 */
+	u8 res10[0x600];
+	upc83xx_t upc1;		/* MultiPHY UTOPIA POS Controller 1 */
+	ucc83xx_t ucc2;		/* ucc2 */
+	ucc83xx_t ucc4;		/* ucc4 */
+	ucc83xx_t ucc6;		/* ucc6 */
+	ucc83xx_t ucc8;		/* ucc8 */
+	u8 res11[0x600];
+	upc83xx_t upc2;		/* MultiPHY UTOPIA POS Controller 2 */
+	sdma83xx_t sdma;	/* SDMA */
+	dbg83xx_t dbg;		/* Debug Space */
+	rsp83xx_t rsp[0x2];	/* RISC Special Registers (Trap and Breakpoint) */
+	u8 res12[0x300];
+	u8 res13[0x3A00];
+	u8 res14[0x8000];	/* 0x108000 -  0x110000 */
+	u8 res15[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
+	u8 res16[0x24000];	/* 0x11C000 -  0x140000 */
+	u8 res17[0xC0000];	/* 0x140000 -  0x200000 */
+#endif
 } immap_t;
 
-#endif /* __IMMAP_8349__ */
+#endif				/* __IMMAP_83xx__ */
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
new file mode 100644
index 0000000..f385032
--- /dev/null
+++ b/include/asm-ppc/immap_qe.h
@@ -0,0 +1,550 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ * Author: Shlomi Gridih <gridish@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __IMMAP_QE_H__
+#define __IMMAP_QE_H__
+
+/* QE I-RAM
+*/
+typedef struct qe_iram {
+	u32 iadd;		/* I-RAM Address Register */
+	u32 idata;		/* I-RAM Data Register    */
+	u8 res0[0x78];
+} __attribute__ ((packed)) qe_iram_t;
+
+/* QE Interrupt Controller
+*/
+typedef struct qe_ic {
+	u32 qicr;
+	u32 qivec;
+	u32 qripnr;
+	u32 qipnr;
+	u32 qipxcc;
+	u32 qipycc;
+	u32 qipwcc;
+	u32 qipzcc;
+	u32 qimr;
+	u32 qrimr;
+	u32 qicnr;
+	u8 res0[0x4];
+	u32 qiprta;
+	u32 qiprtb;
+	u8 res1[0x4];
+	u32 qricr;
+	u8 res2[0x20];
+	u32 qhivec;
+	u8 res3[0x1C];
+} __attribute__ ((packed)) qe_ic_t;
+
+/* Communications Processor
+*/
+typedef struct cp_qe {
+	u32 cecr;		/* QE command register */
+	u32 ceccr;		/* QE controller configuration register */
+	u32 cecdr;		/* QE command data register */
+	u8 res0[0xA];
+	u16 ceter;		/* QE timer event register */
+	u8 res1[0x2];
+	u16 cetmr;		/* QE timers mask register */
+	u32 cetscr;		/* QE time-stamp timer control register */
+	u32 cetsr1;		/* QE time-stamp register 1 */
+	u32 cetsr2;		/* QE time-stamp register 2 */
+	u8 res2[0x8];
+	u32 cevter;		/* QE virtual tasks event register */
+	u32 cevtmr;		/* QE virtual tasks mask register */
+	u16 cercr;		/* QE RAM control register */
+	u8 res3[0x2];
+	u8 res4[0x24];
+	u16 ceexe1;		/* QE external request 1 event register */
+	u8 res5[0x2];
+	u16 ceexm1;		/* QE external request 1 mask register */
+	u8 res6[0x2];
+	u16 ceexe2;		/* QE external request 2 event register */
+	u8 res7[0x2];
+	u16 ceexm2;		/* QE external request 2 mask register */
+	u8 res8[0x2];
+	u16 ceexe3;		/* QE external request 3 event register */
+	u8 res9[0x2];
+	u16 ceexm3;		/* QE external request 3 mask register */
+	u8 res10[0x2];
+	u16 ceexe4;		/* QE external request 4 event register */
+	u8 res11[0x2];
+	u16 ceexm4;		/* QE external request 4 mask register */
+	u8 res12[0x2];
+	u8 res13[0x280];
+} __attribute__ ((packed)) cp_qe_t;
+
+/* QE Multiplexer
+*/
+typedef struct qe_mux {
+	u32 cmxgcr;		/* CMX general clock route register    */
+	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register    */
+	u32 cmxsi1cr_h;		/* CMX SI1 clock route high register   */
+	u32 cmxsi1syr;		/* CMX SI1 SYNC route register         */
+	u32 cmxucr1;		/* CMX UCC1, UCC3 clock route register */
+	u32 cmxucr2;		/* CMX UCC5, UCC7 clock route register */
+	u32 cmxucr3;		/* CMX UCC2, UCC4 clock route register */
+	u32 cmxucr4;		/* CMX UCC6, UCC8 clock route register */
+	u32 cmxupcr;		/* CMX UPC clock route register        */
+	u8 res0[0x1C];
+} __attribute__ ((packed)) qe_mux_t;
+
+/* QE Timers
+*/
+typedef struct qe_timers {
+	u8 gtcfr1;		/* Timer 1 2 global configuration register */
+	u8 res0[0x3];
+	u8 gtcfr2;		/* Timer 3 4 global configuration register */
+	u8 res1[0xB];
+	u16 gtmdr1;		/* Timer 1 mode register */
+	u16 gtmdr2;		/* Timer 2 mode register */
+	u16 gtrfr1;		/* Timer 1 reference register */
+	u16 gtrfr2;		/* Timer 2 reference register */
+	u16 gtcpr1;		/* Timer 1 capture register */
+	u16 gtcpr2;		/* Timer 2 capture register */
+	u16 gtcnr1;		/* Timer 1 counter */
+	u16 gtcnr2;		/* Timer 2 counter */
+	u16 gtmdr3;		/* Timer 3 mode register */
+	u16 gtmdr4;		/* Timer 4 mode register */
+	u16 gtrfr3;		/* Timer 3 reference register */
+	u16 gtrfr4;		/* Timer 4 reference register */
+	u16 gtcpr3;		/* Timer 3 capture register */
+	u16 gtcpr4;		/* Timer 4 capture register */
+	u16 gtcnr3;		/* Timer 3 counter */
+	u16 gtcnr4;		/* Timer 4 counter */
+	u16 gtevr1;		/* Timer 1 event register */
+	u16 gtevr2;		/* Timer 2 event register */
+	u16 gtevr3;		/* Timer 3 event register */
+	u16 gtevr4;		/* Timer 4 event register */
+	u16 gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed)) qe_timers_t;
+
+/* BRG
+*/
+typedef struct qe_brg {
+	u32 brgc1;		/* BRG1 configuration register  */
+	u32 brgc2;		/* BRG2 configuration register  */
+	u32 brgc3;		/* BRG3 configuration register  */
+	u32 brgc4;		/* BRG4 configuration register  */
+	u32 brgc5;		/* BRG5 configuration register  */
+	u32 brgc6;		/* BRG6 configuration register  */
+	u32 brgc7;		/* BRG7 configuration register  */
+	u32 brgc8;		/* BRG8 configuration register  */
+	u32 brgc9;		/* BRG9 configuration register  */
+	u32 brgc10;		/* BRG10 configuration register */
+	u32 brgc11;		/* BRG11 configuration register */
+	u32 brgc12;		/* BRG12 configuration register */
+	u32 brgc13;		/* BRG13 configuration register */
+	u32 brgc14;		/* BRG14 configuration register */
+	u32 brgc15;		/* BRG15 configuration register */
+	u32 brgc16;		/* BRG16 configuration register */
+	u8 res0[0x40];
+} __attribute__ ((packed)) qe_brg_t;
+
+/* SPI
+*/
+typedef struct spi {
+	u8 res0[0x20];
+	u32 spmode;		/* SPI mode register */
+	u8 res1[0x2];
+	u8 spie;		/* SPI event register */
+	u8 res2[0x1];
+	u8 res3[0x2];
+	u8 spim;		/* SPI mask register */
+	u8 res4[0x1];
+	u8 res5[0x1];
+	u8 spcom;		/* SPI command register  */
+	u8 res6[0x2];
+	u32 spitd;		/* SPI transmit data register (cpu mode) */
+	u32 spird;		/* SPI receive data register (cpu mode) */
+	u8 res7[0x8];
+} __attribute__ ((packed)) spi_t;
+
+/* SI
+*/
+typedef struct si1 {
+	u16 siamr1;		/* SI1 TDMA mode register */
+	u16 sibmr1;		/* SI1 TDMB mode register */
+	u16 sicmr1;		/* SI1 TDMC mode register */
+	u16 sidmr1;		/* SI1 TDMD mode register */
+	u8 siglmr1_h;		/* SI1 global mode register high */
+	u8 res0[0x1];
+	u8 sicmdr1_h;		/* SI1 command register high */
+	u8 res2[0x1];
+	u8 sistr1_h;		/* SI1 status register high */
+	u8 res3[0x1];
+	u16 sirsr1_h;		/* SI1 RAM shadow address register high */
+	u8 sitarc1;		/* SI1 RAM counter Tx TDMA */
+	u8 sitbrc1;		/* SI1 RAM counter Tx TDMB */
+	u8 sitcrc1;		/* SI1 RAM counter Tx TDMC */
+	u8 sitdrc1;		/* SI1 RAM counter Tx TDMD */
+	u8 sirarc1;		/* SI1 RAM counter Rx TDMA */
+	u8 sirbrc1;		/* SI1 RAM counter Rx TDMB */
+	u8 sircrc1;		/* SI1 RAM counter Rx TDMC */
+	u8 sirdrc1;		/* SI1 RAM counter Rx TDMD */
+	u8 res4[0x8];
+	u16 siemr1;		/* SI1 TDME mode register 16 bits */
+	u16 sifmr1;		/* SI1 TDMF mode register 16 bits */
+	u16 sigmr1;		/* SI1 TDMG mode register 16 bits */
+	u16 sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8 siglmg1_l;		/* SI1 global mode register low 8 bits */
+	u8 res5[0x1];
+	u8 sicmdr1_l;		/* SI1 command register low 8 bits */
+	u8 res6[0x1];
+	u8 sistr1_l;		/* SI1 status register low 8 bits */
+	u8 res7[0x1];
+	u16 sirsr1_l;		/* SI1 RAM shadow address register low 16 bits */
+	u8 siterc1;		/* SI1 RAM counter Tx TDME 8 bits */
+	u8 sitfrc1;		/* SI1 RAM counter Tx TDMF 8 bits */
+	u8 sitgrc1;		/* SI1 RAM counter Tx TDMG 8 bits */
+	u8 sithrc1;		/* SI1 RAM counter Tx TDMH 8 bits */
+	u8 sirerc1;		/* SI1 RAM counter Rx TDME 8 bits */
+	u8 sirfrc1;		/* SI1 RAM counter Rx TDMF 8 bits */
+	u8 sirgrc1;		/* SI1 RAM counter Rx TDMG 8 bits */
+	u8 sirhrc1;		/* SI1 RAM counter Rx TDMH 8 bits */
+	u8 res8[0x8];
+	u32 siml1;		/* SI1 multiframe limit register */
+	u8 siedm1;		/* SI1 extended diagnostic mode register */
+	u8 res9[0xBB];
+} __attribute__ ((packed)) si1_t;
+
+/* SI Routing Tables
+*/
+typedef struct sir {
+	u8 tx[0x400];
+	u8 rx[0x400];
+	u8 res0[0x800];
+} __attribute__ ((packed)) sir_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+	u8 usb_usmod;
+	u8 usb_usadr;
+	u8 usb_uscom;
+	u8 res1[1];
+	u16 usb_usep1;
+	u16 usb_usep2;
+	u16 usb_usep3;
+	u16 usb_usep4;
+	u8 res2[4];
+	u16 usb_usber;
+	u8 res3[2];
+	u16 usb_usbmr;
+	u8 res4[1];
+	u8 usb_usbs;
+	u16 usb_ussft;
+	u8 res5[2];
+	u16 usb_usfrn;
+	u8 res6[0x22];
+} __attribute__ ((packed)) usb_t;
+
+/* MCC
+*/
+typedef struct mcc {
+	u32 mcce;		/* MCC event register */
+	u32 mccm;		/* MCC mask register */
+	u32 mccf;		/* MCC configuration register */
+	u32 merl;		/* MCC emergency request level register */
+	u8 res0[0xF0];
+} __attribute__ ((packed)) mcc_t;
+
+/* QE UCC Slow
+*/
+typedef struct ucc_slow {
+	u32 gumr_l;		/* UCCx general mode register (low) */
+	u32 gumr_h;		/* UCCx general mode register (high) */
+	u16 upsmr;		/* UCCx protocol-specific mode register */
+	u8 res0[0x2];
+	u16 utodr;		/* UCCx transmit on demand register */
+	u16 udsr;		/* UCCx data synchronization register */
+	u16 ucce;		/* UCCx event register */
+	u8 res1[0x2];
+	u16 uccm;		/* UCCx mask register */
+	u8 res2[0x1];
+	u8 uccs;		/* UCCx status register */
+	u8 res3[0x24];
+	u16 utpt;
+	u8 guemr;		/* UCC general extended mode register */
+	u8 res4[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_slow_t;
+
+typedef struct ucc_ethernet {
+	u32 maccfg1;		/* mac configuration reg. 1            */
+	u32 maccfg2;		/* mac configuration reg. 2            */
+	u32 ipgifg;		/* interframe gap reg.                 */
+	u32 hafdup;		/* half-duplex reg.                    */
+	u8 res1[0x10];
+	u32 miimcfg;		/* MII management configuration reg    */
+	u32 miimcom;		/* MII management command reg          */
+	u32 miimadd;		/* MII management address reg          */
+	u32 miimcon;		/* MII management control reg          */
+	u32 miimstat;		/* MII management status reg           */
+	u32 miimind;		/* MII management indication reg       */
+	u32 ifctl;		/* interface control reg               */
+	u32 ifstat;		/* interface statux reg                */
+	u32 macstnaddr1;	/* mac station address part 1 reg      */
+	u32 macstnaddr2;	/* mac station address part 2 reg      */
+	u8 res2[0x8];
+	u32 uempr;		/* UCC Ethernet Mac parameter reg      */
+	u32 utbipar;		/* UCC tbi address reg                 */
+	u16 uescr;		/* UCC Ethernet statistics control reg */
+	u8 res3[0x180 - 0x15A];
+	u32 tx64;		/* Total number of frames (including bad
+				 * frames) transmitted that were exactly
+				 * of the minimal length (64 for un tagged,
+				 * 68 for tagged, or with length exactly
+				 * equal to the parameter MINLength */
+	u32 tx127;		/* Total number of frames (including bad
+				 * frames) transmitted that were between
+				 * MINLength (Including FCS length==4)
+				 * and 127 octets */
+	u32 tx255;		/* Total number of frames (including bad
+				 * frames) transmitted that were between
+				 * 128 (Including FCS length==4) and 255
+				 * octets */
+	u32 rx64;		/* Total number of frames received including
+				 * bad frames that were exactly of the
+				 * mninimal length (64 bytes) */
+	u32 rx127;		/* Total number of frames (including bad
+				 * frames) received that were between
+				 * MINLength (Including FCS length==4)
+				 * and 127 octets */
+	u32 rx255;		/* Total number of frames (including
+				 * bad frames) received that were between
+				 * 128 (Including FCS length==4) and 255
+				 * octets */
+	u32 txok;		/* Total number of octets residing in frames
+				 * that where involved in succesfull
+				 * transmission */
+	u16 txcf;		/* Total number of PAUSE control frames
+				 *  transmitted by this MAC */
+	u8 res4[0x2];
+	u32 tmca;		/* Total number of frames that were transmitted
+				 * succesfully with the group address bit set
+				 * that are not broadcast frames */
+	u32 tbca;		/* Total number of frames transmitted
+				 * succesfully that had destination address
+				 * field equal to the broadcast address */
+	u32 rxfok;		/* Total number of frames received OK */
+	u32 rxbok;		/* Total number of octets received OK */
+	u32 rbyt;		/* Total number of octets received including
+				 * octets in bad frames. Must be implemented
+				 * in HW because it includes octets in frames
+				 * that never even reach the UCC */
+	u32 rmca;		/* Total number of frames that were received
+				 * succesfully with the group address bit set
+				 * that are not broadcast frames */
+	u32 rbca;		/* Total number of frames received succesfully
+				 * that had destination address equal to the
+				 * broadcast address */
+	u32 scar;		/* Statistics carry register */
+	u32 scam;		/* Statistics caryy mask register */
+	u8 res5[0x200 - 0x1c4];
+} __attribute__ ((packed)) uec_t;
+
+/* QE UCC Fast
+*/
+typedef struct ucc_fast {
+	u32 gumr;		/* UCCx general mode register */
+	u32 upsmr;		/* UCCx protocol-specific mode register  */
+	u16 utodr;		/* UCCx transmit on demand register  */
+	u8 res0[0x2];
+	u16 udsr;		/* UCCx data synchronization register  */
+	u8 res1[0x2];
+	u32 ucce;		/* UCCx event register */
+	u32 uccm;		/* UCCx mask register.  */
+	u8 uccs;		/* UCCx status register */
+	u8 res2[0x7];
+	u32 urfb;		/* UCC receive FIFO base */
+	u16 urfs;		/* UCC receive FIFO size */
+	u8 res3[0x2];
+	u16 urfet;		/* UCC receive FIFO emergency threshold */
+	u16 urfset;		/* UCC receive FIFO special emergency
+				 * threshold */
+	u32 utfb;		/* UCC transmit FIFO base */
+	u16 utfs;		/* UCC transmit FIFO size */
+	u8 res4[0x2];
+	u16 utfet;		/* UCC transmit FIFO emergency threshold */
+	u8 res5[0x2];
+	u16 utftt;		/* UCC transmit FIFO transmit threshold */
+	u8 res6[0x2];
+	u16 utpt;		/* UCC transmit polling timer */
+	u8 res7[0x2];
+	u32 urtry;		/* UCC retry counter register */
+	u8 res8[0x4C];
+	u8 guemr;		/* UCC general extended mode register */
+	u8 res9[0x100 - 0x091];
+	uec_t ucc_eth;
+} __attribute__ ((packed)) ucc_fast_t;
+
+/* QE UCC
+*/
+typedef struct ucc_common {
+	u8 res1[0x90];
+	u8 guemr;
+	u8 res2[0x200 - 0x091];
+} __attribute__ ((packed)) ucc_common_t;
+
+typedef struct ucc {
+	union {
+		ucc_slow_t slow;
+		ucc_fast_t fast;
+		ucc_common_t common;
+	};
+} __attribute__ ((packed)) ucc_t;
+
+/* MultiPHY UTOPIA POS Controllers (UPC)
+*/
+typedef struct upc {
+	u32 upgcr;		/* UTOPIA/POS general configuration register */
+	u32 uplpa;		/* UTOPIA/POS last PHY address */
+	u32 uphec;		/* ATM HEC register */
+	u32 upuc;		/* UTOPIA/POS UCC configuration */
+	u32 updc1;		/* UTOPIA/POS device 1 configuration */
+	u32 updc2;		/* UTOPIA/POS device 2 configuration  */
+	u32 updc3;		/* UTOPIA/POS device 3 configuration */
+	u32 updc4;		/* UTOPIA/POS device 4 configuration  */
+	u32 upstpa;		/* UTOPIA/POS STPA threshold  */
+	u8 res0[0xC];
+	u32 updrs1_h;		/* UTOPIA/POS device 1 rate select  */
+	u32 updrs1_l;		/* UTOPIA/POS device 1 rate select  */
+	u32 updrs2_h;		/* UTOPIA/POS device 2 rate select  */
+	u32 updrs2_l;		/* UTOPIA/POS device 2 rate select */
+	u32 updrs3_h;		/* UTOPIA/POS device 3 rate select */
+	u32 updrs3_l;		/* UTOPIA/POS device 3 rate select */
+	u32 updrs4_h;		/* UTOPIA/POS device 4 rate select */
+	u32 updrs4_l;		/* UTOPIA/POS device 4 rate select */
+	u32 updrp1;		/* UTOPIA/POS device 1 receive priority low  */
+	u32 updrp2;		/* UTOPIA/POS device 2 receive priority low  */
+	u32 updrp3;		/* UTOPIA/POS device 3 receive priority low  */
+	u32 updrp4;		/* UTOPIA/POS device 4 receive priority low  */
+	u32 upde1;		/* UTOPIA/POS device 1 event */
+	u32 upde2;		/* UTOPIA/POS device 2 event */
+	u32 upde3;		/* UTOPIA/POS device 3 event */
+	u32 upde4;		/* UTOPIA/POS device 4 event */
+	u16 uprp1;
+	u16 uprp2;
+	u16 uprp3;
+	u16 uprp4;
+	u8 res1[0x8];
+	u16 uptirr1_0;		/* Device 1 transmit internal rate 0 */
+	u16 uptirr1_1;		/* Device 1 transmit internal rate 1 */
+	u16 uptirr1_2;		/* Device 1 transmit internal rate 2 */
+	u16 uptirr1_3;		/* Device 1 transmit internal rate 3 */
+	u16 uptirr2_0;		/* Device 2 transmit internal rate 0 */
+	u16 uptirr2_1;		/* Device 2 transmit internal rate 1 */
+	u16 uptirr2_2;		/* Device 2 transmit internal rate 2 */
+	u16 uptirr2_3;		/* Device 2 transmit internal rate 3 */
+	u16 uptirr3_0;		/* Device 3 transmit internal rate 0 */
+	u16 uptirr3_1;		/* Device 3 transmit internal rate 1 */
+	u16 uptirr3_2;		/* Device 3 transmit internal rate 2 */
+	u16 uptirr3_3;		/* Device 3 transmit internal rate 3 */
+	u16 uptirr4_0;		/* Device 4 transmit internal rate 0 */
+	u16 uptirr4_1;		/* Device 4 transmit internal rate 1 */
+	u16 uptirr4_2;		/* Device 4 transmit internal rate 2 */
+	u16 uptirr4_3;		/* Device 4 transmit internal rate 3 */
+	u32 uper1;		/* Device 1 port enable register */
+	u32 uper2;		/* Device 2 port enable register */
+	u32 uper3;		/* Device 3 port enable register */
+	u32 uper4;		/* Device 4 port enable register */
+	u8 res2[0x150];
+} __attribute__ ((packed)) upc_t;
+
+/* SDMA
+*/
+typedef struct sdma {
+	u32 sdsr;		/* Serial DMA status register */
+	u32 sdmr;		/* Serial DMA mode register */
+	u32 sdtr1;		/* SDMA system bus threshold register */
+	u32 sdtr2;		/* SDMA secondary bus threshold register */
+	u32 sdhy1;		/* SDMA system bus hysteresis register */
+	u32 sdhy2;		/* SDMA secondary bus hysteresis register */
+	u32 sdta1;		/* SDMA system bus address register */
+	u32 sdta2;		/* SDMA secondary bus address register */
+	u32 sdtm1;		/* SDMA system bus MSNUM register */
+	u32 sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8 res0[0x10];
+	u32 sdaqr;		/* SDMA address bus qualify register */
+	u32 sdaqmr;		/* SDMA address bus qualify mask register */
+	u8 res1[0x4];
+	u32 sdwbcr;		/* SDMA CAM entries base register */
+	u8 res2[0x38];
+} __attribute__ ((packed)) sdma_t;
+
+/* Debug Space
+*/
+typedef struct dbg {
+	u32 bpdcr;		/* Breakpoint debug command register */
+	u32 bpdsr;		/* Breakpoint debug status register */
+	u32 bpdmr;		/* Breakpoint debug mask register */
+	u32 bprmrr0;		/* Breakpoint request mode risc register 0 */
+	u32 bprmrr1;		/* Breakpoint request mode risc register 1 */
+	u8 res0[0x8];
+	u32 bprmtr0;		/* Breakpoint request mode trb register 0 */
+	u32 bprmtr1;		/* Breakpoint request mode trb register 1 */
+	u8 res1[0x8];
+	u32 bprmir;		/* Breakpoint request mode immediate register */
+	u32 bprmsr;		/* Breakpoint request mode serial register */
+	u32 bpemr;		/* Breakpoint exit mode register */
+	u8 res2[0x48];
+} __attribute__ ((packed)) dbg_t;
+
+/* RISC Special Registers (Trap and Breakpoint)
+*/
+typedef struct rsp {
+	u8 fixme[0x100];
+} __attribute__ ((packed)) rsp_t;
+
+typedef struct qe_immap {
+	qe_iram_t iram;		/* I-RAM */
+	qe_ic_t ic;		/* Interrupt Controller */
+	cp_qe_t cp;		/* Communications Processor */
+	qe_mux_t qmx;		/* QE Multiplexer */
+	qe_timers_t qet;	/* QE Timers */
+	spi_t spi[0x2];		/* spi  */
+	mcc_t mcc;		/* mcc */
+	qe_brg_t brg;		/* brg */
+	usb_t usb;		/* USB */
+	si1_t si1;		/* SI */
+	u8 res11[0x800];
+	sir_t sir;		/* SI Routing Tables  */
+	ucc_t ucc1;		/* ucc1 */
+	ucc_t ucc3;		/* ucc3 */
+	ucc_t ucc5;		/* ucc5 */
+	ucc_t ucc7;		/* ucc7 */
+	u8 res12[0x600];
+	upc_t upc1;		/* MultiPHY UTOPIA POS Controller 1 */
+	ucc_t ucc2;		/* ucc2 */
+	ucc_t ucc4;		/* ucc4 */
+	ucc_t ucc6;		/* ucc6 */
+	ucc_t ucc8;		/* ucc8 */
+	u8 res13[0x600];
+	upc_t upc2;		/* MultiPHY UTOPIA POS Controller 2 */
+	sdma_t sdma;		/* SDMA */
+	dbg_t dbg;		/* Debug Space */
+	rsp_t rsp[0x2];		/* RISC Special Registers
+				 * (Trap and Breakpoint) */
+	u8 res14[0x300];
+	u8 res15[0x3A00];
+	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
+	u8 muram[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
+	u8 res17[0x24000];	/* 0x11C000 -  0x140000 */
+	u8 res18[0xC0000];	/* 0x140000 -  0x200000 */
+} __attribute__ ((packed)) qe_map_t;
+
+extern qe_map_t *qe_immr;
+
+#endif				/* __IMMAP_QE_H__ */
diff --git a/include/common.h b/include/common.h
index ac78d1c..982d6a8 100644
--- a/include/common.h
+++ b/include/common.h
@@ -402,6 +402,11 @@ void		ppcSync(void);
 void		ppcDcbz(unsigned long value);
 #endif
 
+#if defined (CONFIG_MPC83XX)
+void		ppcDWload(unsigned int *addr, unsigned int *ret);
+void		ppcDWstore(unsigned int *addr, unsigned int *value);
+#endif
+
 /* $(CPU)/cpu.c */
 int	checkcpu      (void);
 int	checkicache   (void);
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 66f1646..5bed2d0 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -36,6 +36,7 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC83XX		1	/* MPC83XX family */
+#define CONFIG_MPC834X		1	/* MPC834X family */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
 
@@ -59,9 +60,20 @@
 #endif
 #endif
 
+#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
+#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
+#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
+				| CFG_SCCR_TSEC1CM	\
+				| CFG_SCCR_TSEC2CM	\
+				| CFG_SCCR_ENCCM	\
+				| CFG_SCCR_USBCM	)
+
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
-#define CFG_IMMRBAR		0xE0000000
+#define CFG_IMMR		0xE0000000
 
 #undef CFG_DRAM_TEST				/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00000000      /* memtest region */
@@ -299,8 +311,8 @@
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_IMMRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_IMMRBAR+0x4600)
+#define CFG_NS16550_COM1        (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2        (CFG_IMMR+0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
@@ -308,20 +320,35 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8349@0"
+#define OF_SOC			"soc8349@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 #define CFG_I2C2_OFFSET		0x3100
 
 /* TSEC */
 #define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
 #define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
 
 /* USB */
 #define CFG_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
@@ -615,8 +642,8 @@
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 #define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -666,11 +693,11 @@
 #define CONFIG_ETH1ADDR		00:E0:0C:00:7E:21
 #endif
 
-#define CONFIG_IPADDR		192.168.205.5
+#define CONFIG_IPADDR		192.168.1.253
 
 #define CONFIG_HOSTNAME		mpc8349emds
-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
-#define CONFIG_BOOTFILE		/tftpboot/tqm83xx/uImage
+#define CONFIG_ROOTPATH		/nfsroot/rootfs
+#define CONFIG_BOOTFILE		uImage
 
 #define CONFIG_SERVERIP		192.168.1.1
 #define CONFIG_GATEWAYIP	192.168.1.1
@@ -703,14 +730,31 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
 		"bootm\0"						\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/mpc8349emds/uImage\0"			\
 	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
 	"update=protect off fe000000 fe03ffff; "			\
 		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
 	"upd=run load;run update\0"					\
+	"fdtaddr=400000\0"						\
+	"fdtfile=mpc8349emds.dtb\0"					\
 	""
 
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
new file mode 100644
index 0000000..8dc9635
--- /dev/null
+++ b/include/configs/MPC8349ITX.h
@@ -0,0 +1,804 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ MPC8349E-mITX board configuration file
+
+ Memory map:
+
+ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
+ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
+ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
+ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
+ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
+ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
+ 0xF000_0000-0xF000_FFFF Compact Flash
+ 0xF001_0000-0xF001_FFFF Local bus expansion slot
+ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
+ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
+ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
+
+ I2C address list:
+ 						Align.	Board
+ Bus	Addr    Part No.	Description	Length	Location
+ ----------------------------------------------------------------
+ I2C0	0x50    M24256-BWMN6P	Board EEPROM	2       U64
+
+ I2C1	0x20    PCF8574		I2C Expander	0	U8
+ I2C1	0x21    PCF8574		I2C Expander	0       U10
+ I2C1	0x38    PCF8574A	I2C Expander    0	U8
+ I2C1	0x39    PCF8574A	I2C Expander	0	U10
+ I2C1	0x51    (DDR)		DDR EEPROM	1	U1
+ I2C1	0x68    DS1339		RTC		1	U68
+
+ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC8349		/* MPC8349 specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
+#define CONFIG_RTC_DS1337
+
+/* I2C */
+#define CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET      	0x3000
+#define CFG_I2C2_OFFSET      	0x3100
+#define CFG_SPD_BUS_NUM		1	/* The I2C bus for SPD */
+
+#define CFG_I2C_8574_ADDR1	0x20	/* I2C1, PCF8574 */
+#define CFG_I2C_8574_ADDR2	0x21	/* I2C1, PCF8574 */
+#define CFG_I2C_8574A_ADDR1	0x38	/* I2C1, PCF8574A */
+#define CFG_I2C_8574A_ADDR2	0x39	/* I2C1, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C0, Board EEPROM */
+#define CFG_I2C_RTC_ADDR	0x68	/* I2C1, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS	0x51	/* I2C1, DDR */
+
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+
+/* Don't probe these addresses: */
+#define CFG_I2C_NOPROBES        {{1, CFG_I2C_8574_ADDR1}, \
+				 {1, CFG_I2C_8574_ADDR2}, \
+				 {1, CFG_I2C_8574A_ADDR1}, \
+				 {1, CFG_I2C_8574A_ADDR2}}
+/* Bit definitions for the 8574[A] I2C expander */
+#define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
+#define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
+#define I2C_8574_MPCICLKRN	0x10	/* MiniPCI Clk Run */
+#define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
+#define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
+
+#undef CONFIG_SOFT_I2C
+
+#endif
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66666666	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66666666
+#else
+#define CONFIG_SYS_CLK_FREQ	33333333
+#endif
+#endif
+
+#define CFG_IMMR		0xE0000000	/* The IMMR is relocated to here */
+
+#undef CFG_DRAM_TEST                   		/* memory test, takes time */
+#define CFG_MEMTEST_START       0x00003000      /* memtest region */
+#define CFG_MEMTEST_END         0x07100000      /* only has 128M */
+
+/*
+ * DDR Setup
+ */
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+#define CFG_83XX_DDR_USES_CS0
+
+#ifndef CONFIG_SPD_EEPROM
+/*
+ * Manually set up DDR parameters
+ */
+    #define CFG_DDR_SIZE	256		/* Mb */
+    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+    #define CFG_DDR_TIMING_1	0x26242321
+    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
+#endif
+
+/* FLASH on the Local Bus */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
+#define CFG_FLASH_EMPTY_INFO
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16Mb window bytes */
+
+/* VSC7385 on the Local Bus */
+#define CFG_VSC7385_BASE	0xF8000000	/* start of VSC7385   */
+
+#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CFG_OR1_PRELIM		(0xFFFE0000 /* 128KB */ | \
+				OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE	/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR1_PRELIM	0x80000010		/* Access window size 128K */
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_LED_BASE		0xF9000000  /* start of LED and Board ID */
+#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
+#define CFG_OR2_PRELIM		(0xFFE00000 /* 2MB */ | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
+				OR_GPCM_SCY_9 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#ifdef CONFIG_COMPACT_FLASH
+
+#define CFG_CF_BASE	    	0xF0000000
+
+#define CFG_BR3_PRELIM      	(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CFG_OR3_PRELIM	    	(OR_UPM_AM | OR_UPM_BI)
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_CF_BASE	/* Window base at flash base + LED & Board ID */
+#define CFG_LBLAWAR2_PRELIM 	0x8000000F	/* 64K bytes */
+
+#undef CONFIG_IDE_RESET
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	1
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
+#define CFG_ATA_DATA_OFFSET	0x0000
+#define CFG_ATA_REG_OFFSET	0
+#define CFG_ATA_ALT_OFFSET	0x0200
+#define CFG_ATA_STRIDE		2
+
+#define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
+
+#endif
+
+#define CONFIG_DOS_PARTITION
+
+#define CFG_MID_FLASH_JUMP      0x7F000000
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x1000	     /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE  	0x100     /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#undef CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+
+#define CFG_BR2_PRELIM		(CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
+#define CFG_OR2_PRELIM		(0xFC000000 /* 64 MB */ | \
+				 OR_SDRAM_XAM | \
+				 ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
+				 ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
+				 OR_SDRAM_EAD)
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+				| CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8349@0"
+#define OF_SOC			"soc8349@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_MPC83XX_PCI2
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xE2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
+#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
+#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#endif
+
+#define _IO_BASE		0x00000000	/* points to PCI I/O space */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)	    (x)
+#endif
+
+#ifndef CONFIG_PCI_PNP
+    #define PCI_ENET0_IOADDR	0x00000000
+    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
+    #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#endif
+
+/* TSEC */
+
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE		/* In case CFG_CMD_MII is specified */
+
+#define CONFIG_MPC83XX_TSEC1
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_MPC83XX_TSEC1_NAME  "TSEC0"
+#define CFG_TSEC1_OFFSET 	0x24000
+#define TSEC1_PHY_ADDR		0x1c    /* VSC8201 uses address 0x1c */
+#define TSEC1_PHYIDX		0
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_MPC83XX_TSEC2_NAME  "TSEC1"
+#define CFG_TSEC2_OFFSET 	0x25000
+#define CONFIG_UNKNOWN_TSEC	/* TSEC2 is proprietary */
+#define TSEC2_PHY_ADDR		4
+#define TSEC2_PHYIDX		0
+#endif
+
+#define CONFIG_ETHPRIME		"Freescale TSEC"
+
+#endif
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/* CONFIG_COMMANDS */
+
+#ifdef CONFIG_COMPACT_FLASH
+#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
+#else
+#define CONFIG_COMMANDS_CF	0
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
+#else
+#define CONFIG_COMMANDS_PCI	0
+#endif
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_I2C	0
+#endif
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				CONFIG_COMMANDS_CF	| \
+				CFG_CMD_NET 	| \
+				CFG_CMD_PING 	| \
+				CONFIG_COMMANDS_I2C 	| \
+				CONFIG_COMMANDS_PCI 	| \
+				CFG_CMD_SDRAM 	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_IRQ)
+#include <cmd_confdefs.h>
+
+/* Watchdog */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+#ifdef CONFIG_WATCHDOG
+#define CFG_WATCHDOG_VALUE      0xFFFFFFC3
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"MPC8349E-mITX> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE 	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef PCI_64BIT
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System performance */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
+#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 	HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L	0
+#define CFG_IBAT1U	0
+#define CFG_IBAT2L	0
+#define CFG_IBAT2U	0
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	0
+#define CFG_IBAT3U	0
+#define CFG_IBAT4L	0
+#define CFG_IBAT4U	0
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L	0
+#define CFG_IBAT7U	0
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_ETHADDR		00:E0:0C:00:8C:01
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
+#endif
+
+#if 1
+#define CONFIG_IPADDR		10.82.19.159
+#define CONFIG_SERVERIP		10.82.48.106
+#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_NETMASK		255.255.252.0
+#define CONFIG_NETDEV		eth0
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE		timur/uImage
+
+#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#else
+#define CONFIG_IPADDR		192.168.1.253
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.252.0
+#define CONFIG_NETDEV		eth0
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot/rootfs
+#define CONFIG_BOOTFILE		uImage
+
+#define CONFIG_UBOOTPATH	u-boot.bin
+#endif
+
+#define CONFIG_UBOOTSTART	fe700000
+#define CONFIG_UBOOTEND		fe77ffff
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTDELAY	6
+#else
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#endif
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define CONFIG_BOOTARGS \
+	"root=/dev/nfs rw" \
+	" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
+	" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
+		MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
+		MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
+	" console=ttyS0," MK_STR(CONFIG_BAUDRATE)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
+		"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
+	"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"protect off FEF00000 FEF7FFFF; " \
+		"erase FEF00000 FEF7FFFF; " \
+		"cp.b $loadaddr FEF00000 $filesize; " \
+		"protect on FEF00000 FEF7FFFF; " \
+		"cmp.b $loadaddr FEF00000 $filesize\0" \
+	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
+	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"	\
+        "fdtaddr=400000\0"                                              \
+        "fdtfile=mpc8349emitx.dtb\0"                                    \
+        ""
+
+#define CONFIG_NFSBOOTCOMMAND                                           \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"                                            \
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND                                           \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"                                            \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000..2ff5f48
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,635 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CE_PLL_VCO_DIV_4 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X6 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCICKDRV_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCICKDRV_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+
+#define CFG_83XX_DDR_USES_CS0
+
+#undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 	0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000 /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+			BR_V)	/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	128 /* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8360@0"
+#define OF_SOC			"soc8360@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8360@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+#define CFG_I2C2_OFFSET	0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME		"Freescale GETH"
+#define CONFIG_PHY_MODE_NEED_CHANGE
+
+#define CONFIG_UEC_ETH1		/* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
+#define CFG_UEC1_RX_CLK		QE_CLK_NONE
+#define CFG_UEC1_TX_CLK		QE_CLK9
+#define CFG_UEC1_ETH_TYPE	GIGA_ETH
+#define CFG_UEC1_PHY_ADDR	0
+#define CFG_UEC1_INTERFACE_MODE	ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2		/* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
+#define CFG_UEC2_RX_CLK		QE_CLK_NONE
+#define CFG_UEC2_TX_CLK		QE_CLK4
+#define CFG_UEC2_ETH_TYPE	GIGA_ETH
+#define CFG_UEC2_PHY_ADDR	1
+#define CFG_UEC2_INTERFACE_MODE	ENET_1000_GMII
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+                               	| CFG_CMD_PCI \
+                              	| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C  )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR	00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=1000000\0"			                        \
+   "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc8349emds.dtb\0"						\
+   ""
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 4bbee97..728083b 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -37,10 +37,11 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC83XX		1	/* MPC83XX family */
 #define CONFIG_MPC834X		1	/* MPC834X specific */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
-#define CFG_IMMRBAR		0xff400000
+#define CFG_IMMR		0xff400000
 
 /* System clock. Primary input clock when in PCI host mode */
 #define CONFIG_83XX_CLKIN	66666000	/* 66,666 MHz */
@@ -56,6 +57,17 @@
  */
 #define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
 
+#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
+#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
+#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
+				| CFG_SCCR_TSEC1CM	\
+				| CFG_SCCR_TSEC2CM	\
+				| CFG_SCCR_ENCCM	\
+				| CFG_SCCR_USBCM	)
+
 /* board pre init: do not call, nothing to do */
 #undef CONFIG_BOARD_EARLY_INIT_F
 
@@ -83,6 +95,7 @@
 #define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #undef CFG_FLASH_CHECKSUM
 #define CFG_FLASH_BASE		0x80000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		8		/* FLASH size in MB */
 
 /* buffered writes in the AMD chip set is not supported yet */
 #undef CFG_FLASH_USE_BUFFER_WRITE
@@ -197,14 +210,15 @@ extern int tqm834x_num_flash_banks;
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
 
 /*
  * I2C
  */
 #define CONFIG_HARD_I2C				/* I2C with hardware support	*/
 #undef CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CONFIG_FSL_I2C
 #define CFG_I2C_SPEED			400000	/* I2C speed: 400KHz		*/
 #define CFG_I2C_SLAVE			0x7F	/* slave address		*/
 #define CFG_I2C_OFFSET			0x3000
@@ -235,9 +249,9 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_MII
 
 #define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+#define CFG_TSEC1		(CFG_IMMR + CFG_TSEC1_OFFSET)
 #define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2		(CFG_IMMRBAR + CFG_TSEC2_OFFSET)
+#define CFG_TSEC2		(CFG_IMMR + CFG_TSEC2_OFFSET)
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -460,8 +474,8 @@ extern int tqm834x_num_flash_banks;
 #endif
 
 /* IMMRBAR */
-#define CFG_IBAT6L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT6U	(CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U	(CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
 
 /* FLASH */
 #define CFG_IBAT7L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
diff --git a/include/i2c.h b/include/i2c.h
index 6d39080..a8f729a 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -82,4 +82,49 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
 uchar i2c_reg_read (uchar chip, uchar reg);
 void  i2c_reg_write(uchar chip, uchar reg, uchar val);
 
+/*
+ * Functions for setting the current I2C bus and its speed
+ */
+
+/*
+ * i2c_set_bus_num:
+ *
+ *  Change the active I2C bus.  Subsequent read/write calls will
+ *  go to this one.
+ *
+ * 	bus - bus index, zero based
+ *
+ * 	Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_num(unsigned int bus);
+
+/*
+ * i2c_get_bus_num:
+ *
+ *  Returns index of currently active I2C bus.  Zero-based.
+ */
+
+unsigned int i2c_get_bus_num(void);
+
+/*
+ * i2c_set_bus_speed:
+ *
+ *  Change the speed of the active I2C bus
+ *
+ * 	speed - bus speed in Hz
+ *
+ * 	Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_speed(unsigned int);
+
+/*
+ * i2c_get_bus_speed:
+ *
+ *  Returns speed of currently active I2C bus in Hz
+ */
+
+unsigned int i2c_get_bus_speed(void);
+
 #endif	/* _I2C_H_ */
diff --git a/include/ioports.h b/include/ioports.h
index d7e19e1..91ca6fb 100644
--- a/include/ioports.h
+++ b/include/ioports.h
@@ -53,3 +53,14 @@ typedef struct {
  * like the table in the 8260UM (and in the hymod manuals).
  */
 extern const iop_conf_t iop_conf_tab[4][32];
+
+typedef struct {
+	unsigned char	port;
+	unsigned char	pin;
+	int		dir;
+	int		open_drain;
+	int		assign;
+} qe_iop_conf_t;
+
+#define QE_IOP_TAB_END	(-1)
+
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index ea40bad3..03dd0ca 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -8,16 +8,6 @@
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 /*
@@ -29,6 +19,7 @@
 #ifndef __MPC83XX_H__
 #define __MPC83XX_H__
 
+#include <config.h>
 #if defined(CONFIG_E300)
 #include <asm/e300.h>
 #endif
@@ -85,6 +76,33 @@
 #define LBLAWBAR3 0x0038
 #define LBLAWAR3  0x003C
 
+/*
+ * The device ID and revision numbers
+ */
+#define SPR_8349E_REV10		0x80300100
+#define SPR_8349_REV10		0x80310100
+#define SPR_8347E_REV10_TBGA	0x80320100
+#define SPR_8347_REV10_TBGA	0x80330100
+#define SPR_8347E_REV10_PBGA	0x80340100
+#define SPR_8347_REV10_PBGA	0x80350100
+#define SPR_8343E_REV10		0x80360100
+#define SPR_8343_REV10		0x80370100
+
+#define SPR_8349E_REV11		0x80300101
+#define SPR_8349_REV11		0x80310101
+#define SPR_8347E_REV11_TBGA	0x80320101
+#define SPR_8347_REV11_TBGA	0x80330101
+#define SPR_8347E_REV11_PBGA	0x80340101
+#define SPR_8347_REV11_PBGA	0x80350101
+#define SPR_8343E_REV11		0x80360101
+#define SPR_8343_REV11		0x80370101
+
+#define SPR_8360E_REV10		0x80480010
+#define SPR_8360_REV10		0x80490010
+#define SPR_8360E_REV11		0x80480011
+#define SPR_8360_REV11		0x80490011
+#define SPR_8360E_REV12		0x80480012
+#define SPR_8360_REV12		0x80490012
 
 /*
  * Base Registers & Option Registers
@@ -116,9 +134,17 @@
 #define BR_MS_UPMA	0x00000080  /* UPMA */
 #define BR_MS_UPMB	0x000000A0  /* UPMB */
 #define BR_MS_UPMC	0x000000C0  /* UPMC */
+#if defined (CONFIG_MPC8360)
+#define BR_ATOM		0x0000000C
+#define BR_ATOM_SHIFT		2
+#endif
 #define BR_V		0x00000001
 #define BR_V_SHIFT		 0
+#if defined (CONFIG_MPC8349)
 #define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+#elif defined (CONFIG_MPC8360)
+#define BR_RES		~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_ATOM|BR_V)
+#endif
 
 #define OR0 0x5004
 #define OR1 0x500C
@@ -201,14 +227,21 @@
 #define HRCWH_PCI_AGENT              0x00000000
 #define HRCWH_PCI_HOST               0x80000000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_32_BIT_PCI             0x00000000
 #define HRCWH_64_BIT_PCI             0x40000000
+#endif
 
 #define HRCWH_PCI1_ARBITER_DISABLE   0x00000000
 #define HRCWH_PCI1_ARBITER_ENABLE    0x20000000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_PCI2_ARBITER_DISABLE   0x00000000
 #define HRCWH_PCI2_ARBITER_ENABLE    0x10000000
+#elif defined (CONFIG_MPC8360)
+#define HRCWH_PCICKDRV_DISABLE       0x00000000
+#define HRCWH_PCICKDRV_ENABLE        0x10000000
+#endif
 
 #define HRCWH_CORE_DISABLE           0x08000000
 #define HRCWH_CORE_ENABLE            0x00000000
@@ -225,11 +258,14 @@
 
 #define HRCWH_ROM_LOC_DDR_SDRAM      0x00000000
 #define HRCWH_ROM_LOC_PCI1           0x00100000
+#if defined (CONFIG_MPC8349)
 #define HRCWH_ROM_LOC_PCI2           0x00200000
+#endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT     0x00500000
 #define HRCWH_ROM_LOC_LOCAL_16BIT    0x00600000
 #define HRCWH_ROM_LOC_LOCAL_32BIT    0x00700000
 
+#if defined (CONFIG_MPC8349)
 #define HRCWH_TSEC1M_IN_RGMII        0x00000000
 #define HRCWH_TSEC1M_IN_RTBI         0x00004000
 #define HRCWH_TSEC1M_IN_GMII         0x00008000
@@ -239,10 +275,22 @@
 #define HRCWH_TSEC2M_IN_RTBI         0x00001000
 #define HRCWH_TSEC2M_IN_GMII         0x00002000
 #define HRCWH_TSEC2M_IN_TBI          0x00003000
+#endif
+
+#if defined (CONFIG_MPC8360)
+#define HRCWH_SECONDARY_DDR_DISABLE  0x00000000
+#define HRCWH_SECONDARY_DDR_ENABLE   0x00000010
+#endif
 
 #define HRCWH_BIG_ENDIAN             0x00000000
 #define HRCWH_LITTLE_ENDIAN          0x00000008
 
+#define HRCWH_LALE_NORMAL            0x00000000
+#define HRCWH_LALE_EARLY             0x00000004
+
+#define HRCWH_LDP_SET                0x00000000
+#define HRCWH_LDP_CLEAR              0x00000002
+
 /*
  * Hard Reset Configration Word - Low
  */
@@ -281,6 +329,47 @@
 #define HRCWL_CORE_TO_CSB_2_5X1      0x00050000
 #define HRCWL_CORE_TO_CSB_3X1        0x00060000
 
+#if defined (CONFIG_MPC8360)
+#define HRCWL_CE_PLL_VCO_DIV_4       0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_8       0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_2       0x00000080
+
+#define HRCWL_CE_PLL_DIV_1X1         0x00000000
+#define HRCWL_CE_PLL_DIV_2X1         0x00000020
+
+#define HRCWL_CE_TO_PLL_1X16_        0x00000000
+#define HRCWL_CE_TO_PLL_1X2          0x00000002
+#define HRCWL_CE_TO_PLL_1X3          0x00000003
+#define HRCWL_CE_TO_PLL_1X4          0x00000004
+#define HRCWL_CE_TO_PLL_1X5          0x00000005
+#define HRCWL_CE_TO_PLL_1X6          0x00000006
+#define HRCWL_CE_TO_PLL_1X7          0x00000007
+#define HRCWL_CE_TO_PLL_1X8          0x00000008
+#define HRCWL_CE_TO_PLL_1X9          0x00000009
+#define HRCWL_CE_TO_PLL_1X10         0x0000000A
+#define HRCWL_CE_TO_PLL_1X11         0x0000000B
+#define HRCWL_CE_TO_PLL_1X12         0x0000000C
+#define HRCWL_CE_TO_PLL_1X13         0x0000000D
+#define HRCWL_CE_TO_PLL_1X14         0x0000000E
+#define HRCWL_CE_TO_PLL_1X15         0x0000000F
+#define HRCWL_CE_TO_PLL_1X16         0x00000010
+#define HRCWL_CE_TO_PLL_1X17         0x00000011
+#define HRCWL_CE_TO_PLL_1X18         0x00000012
+#define HRCWL_CE_TO_PLL_1X19         0x00000013
+#define HRCWL_CE_TO_PLL_1X20         0x00000014
+#define HRCWL_CE_TO_PLL_1X21         0x00000015
+#define HRCWL_CE_TO_PLL_1X22         0x00000016
+#define HRCWL_CE_TO_PLL_1X23         0x00000017
+#define HRCWL_CE_TO_PLL_1X24         0x00000018
+#define HRCWL_CE_TO_PLL_1X25         0x00000019
+#define HRCWL_CE_TO_PLL_1X26         0x0000001A
+#define HRCWL_CE_TO_PLL_1X27         0x0000001B
+#define HRCWL_CE_TO_PLL_1X28         0x0000001C
+#define HRCWL_CE_TO_PLL_1X29         0x0000001D
+#define HRCWL_CE_TO_PLL_1X30         0x0000001E
+#define HRCWL_CE_TO_PLL_1X31         0x0000001F
+#endif
+
 /*
  * LCRR - Clock Ratio Register (10.3.1.16)
  */
@@ -310,4 +399,31 @@
 #define LCRR_CLKDIV_8  0x00000008
 #define LCRR_CLKDIV_SHIFT       0
 
+/*
+ * SCCR-System Clock Control Register
+ */
+#define SCCR_TSEC1CM_0	0x00000000
+#define SCCR_TSEC1CM_1	0x40000000
+#define SCCR_TSEC1CM_2	0x80000000
+#define SCCR_TSEC1CM_3	0xC0000000
+#define SCCR_TSEC2CM_0	0x00000000
+#define SCCR_TSEC2CM_1	0x10000000
+#define SCCR_TSEC2CM_2	0x20000000
+#define SCCR_TSEC2CM_3	0x30000000
+#define SCCR_ENCCM_0	0x00000000
+#define SCCR_ENCCM_1	0x01000000
+#define SCCR_ENCCM_2	0x02000000
+#define SCCR_ENCCM_3	0x03000000
+#define SCCR_USBCM_0	0x00000000
+#define SCCR_USBCM_1	0x00500000
+#define SCCR_USBCM_2	0x00A00000
+#define SCCR_USBCM_3	0x00F00000
+
+#define SCCR_CLK_MASK	( SCCR_TSEC1CM_3	\
+			| SCCR_TSEC2CM_3	\
+			| SCCR_ENCCM_3		\
+			| SCCR_USBCM_3		)
+
+#define SCCR_DEFAULT	0xFFFFFFFF
+
 #endif	/* __MPC83XX_H__ */