Merge commit 'wd/master'

36 files changed, 1250 insertions, 271 deletions

diff --git a/include/api_public.h b/include/api_public.h
new file mode 100644
index 0000000..690975e
--- /dev/null
+++ b/include/api_public.h
@@ -0,0 +1,102 @@
+#ifndef _API_PUBLIC_H_
+#define _API_PUBLIC_H_
+
+#define API_EINVAL		1	/* invalid argument(s)	*/
+#define API_ENODEV		2	/* no device		*/
+#define API_ENOMEM		3	/* no memory		*/
+#define API_EBUSY		4	/* busy, occupied etc.	*/
+#define API_EIO			5	/* I/O error		*/
+
+typedef	int (*scp_t)(int, int *, ...);
+
+#define API_SIG_VERSION	1
+#define API_SIG_MAGIC	"UBootAPI"
+#define API_SIG_MAGLEN	8
+
+struct api_signature {
+	char		magic[API_SIG_MAGLEN];	/* magic string */
+	uint16_t	version;		/* API version */
+	uint32_t	checksum;		/* checksum of this sig struct */
+	scp_t		syscall;		/* entry point to the API */
+};
+
+enum {
+	API_RSVD = 0,
+	API_GETC,
+	API_PUTC,
+	API_TSTC,
+	API_PUTS,
+	API_RESET,
+	API_GET_SYS_INFO,
+	API_UDELAY,
+	API_GET_TIMER,
+	API_DEV_ENUM,
+	API_DEV_OPEN,
+	API_DEV_CLOSE,
+	API_DEV_READ,
+	API_DEV_WRITE,
+	API_ENV_ENUM,
+	API_ENV_GET,
+	API_ENV_SET,
+	API_MAXCALL
+};
+
+#define MR_ATTR_FLASH	0x0001
+#define MR_ATTR_DRAM	0x0002
+#define MR_ATTR_SRAM	0x0003
+
+struct mem_region {
+	unsigned long	start;
+	unsigned long	size;
+	int		flags;
+};
+
+struct sys_info {
+	unsigned long		clk_bus;
+	unsigned long		clk_cpu;
+	unsigned long		bar;
+	struct mem_region	*mr;
+	int			mr_no;	/* number of memory regions */
+};
+
+#undef CFG_64BIT_LBA
+#ifdef CFG_64BIT_LBA
+typedef	u_int64_t lbasize_t;
+#else
+typedef unsigned long lbasize_t;
+#endif
+typedef unsigned long lbastart_t;
+
+#define DEV_TYP_NONE	0x0000
+#define DEV_TYP_NET	0x0001
+
+#define DEV_TYP_STOR	0x0002
+#define DT_STOR_IDE	0x0010
+#define DT_STOR_SCSI	0x0020
+#define DT_STOR_USB	0x0040
+#define DT_STOR_MMC	0x0080
+
+#define DEV_STA_CLOSED	0x0000		/* invalid, closed */
+#define DEV_STA_OPEN	0x0001		/* open i.e. active */
+
+struct device_info {
+	int	type;
+	void	*cookie;
+
+	union {
+		struct {
+			lbasize_t	block_count;	/* no of blocks */
+			unsigned long	block_size;	/* size of one block */
+		} storage;
+
+		struct {
+			unsigned char	hwaddr[6];
+		} net;
+	} info;
+#define di_stor info.storage
+#define di_net info.net
+
+	int	state;
+};
+
+#endif /* _API_PUBLIC_H_ */
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
index e29bfc2..9d9b971 100644
--- a/include/asm-ppc/cache.h
+++ b/include/asm-ppc/cache.h
@@ -8,15 +8,13 @@
 #include <asm/processor.h>
 
 /* bytes per L1 cache line */
-#if !(defined(CONFIG_8xx) || defined(CONFIG_IOP480))
-#if defined(CONFIG_PPC64BRIDGE)
+#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#define	L1_CACHE_SHIFT	4
+#elif defined(CONFIG_PPC64BRIDGE)
 #define L1_CACHE_SHIFT	7
 #else
 #define	L1_CACHE_SHIFT	5
-#endif /* PPC64 */
-#else
-#define	L1_CACHE_SHIFT	4
-#endif /* !(8xx || IOP480) */
+#endif
 
 #define L1_CACHE_BYTES          (1 << L1_CACHE_SHIFT)
 
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index a16a6d3..39da377 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -513,10 +513,39 @@ typedef struct dbg {
 	u8 res2[0x48];
 } __attribute__ ((packed)) dbg_t;
 
-/* RISC Special Registers (Trap and Breakpoint)
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
 */
 typedef struct rsp {
-	u8 fixme[0x100];
+	u32 tibcr[16];	/* Trap/instruction breakpoint control regs */
+	u8 res0[64];
+	u32 ibcr0;
+	u32 ibs0;
+	u32 ibcnr0;
+	u8 res1[4];
+	u32 ibcr1;
+	u32 ibs1;
+	u32 ibcnr1;
+	u32 npcr;
+	u32 dbcr;
+	u32 dbar;
+	u32 dbamr;
+	u32 dbsr;
+	u32 dbcnr;
+	u8 res2[12];
+	u32 dbdr_h;
+	u32 dbdr_l;
+	u32 dbdmr_h;
+	u32 dbdmr_l;
+	u32 bsr;
+	u32 bor;
+	u32 bior;
+	u8 res3[4];
+	u32 iatr[4];
+	u32 eccr;		/* Exception control configuration register */
+	u32 eicr;
+	u8 res4[0x100-0xf8];
 } __attribute__ ((packed)) rsp_t;
 
 typedef struct qe_immap {
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index b19abe7..45a4764 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -336,55 +336,70 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
  */
 
 /*
- * e500 support
+ * FSL Book-E support
  */
 
-#define MAS0_TLBSEL     0x10000000
-#define MAS0_ESEL       0x000F0000
-#define MAS0_NV         0x00000001
-
-#define MAS1_VALID      0x80000000
-#define MAS1_IPROT      0x40000000
-#define MAS1_TID        0x00FF0000
-#define MAS1_TS         0x00001000
-#define MAS1_TSIZE   	0x00000F00
-
-#define MAS2_EPN        0xFFFFF000
-#define MAS2_SHAREN     0x00000200
-#define MAS2_X0         0x00000040
-#define MAS2_X1         0x00000020
-#define MAS2_W          0x00000010
-#define MAS2_I          0x00000008
-#define MAS2_M          0x00000004
-#define MAS2_G          0x00000002
-#define MAS2_E          0x00000001
-
-#define MAS3_RPN        0xFFFFF000
-#define MAS3_U0         0x00000200
-#define MAS3_U1         0x00000100
-#define MAS3_U2         0x00000080
-#define MAS3_U3         0x00000040
-#define MAS3_UX         0x00000020
-#define MAS3_SX         0x00000010
-#define MAS3_UW         0x00000008
-#define MAS3_SW         0x00000004
-#define MAS3_UR         0x00000002
-#define MAS3_SR         0x00000001
-
-#define MAS4_TLBSELD    0x10000000
-#define MAS4_TIDDSEL    0x00030000
-#define MAS4_DSHAREN    0x00001000
-#define MAS4_TSIZED(x)  (x << 8)
-#define MAS4_X0D        0x00000040
-#define MAS4_X1D        0x00000020
-#define MAS4_WD         0x00000010
-#define MAS4_ID         0x00000008
-#define MAS4_MD         0x00000004
-#define MAS4_GD         0x00000002
-#define MAS4_ED         0x00000001
-
-#define MAS6_SPID       0x00FF0000
-#define MAS6_SAS        0x00000001
+#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)	((x) & 0x00000FFF)
+
+#define MAS1_VALID 	0x80000000
+#define MAS1_IPROT	0x40000000
+#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
+#define MAS1_TS		0x00001000
+#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+
+#define MAS2_EPN	0xFFFFF000
+#define MAS2_X0		0x00000040
+#define MAS2_X1		0x00000020
+#define MAS2_W		0x00000010
+#define MAS2_I		0x00000008
+#define MAS2_M		0x00000004
+#define MAS2_G		0x00000002
+#define MAS2_E		0x00000001
+
+#define MAS3_RPN	0xFFFFF000
+#define MAS3_U0		0x00000200
+#define MAS3_U1		0x00000100
+#define MAS3_U2		0x00000080
+#define MAS3_U3		0x00000040
+#define MAS3_UX		0x00000020
+#define MAS3_SX		0x00000010
+#define MAS3_UW		0x00000008
+#define MAS3_SW		0x00000004
+#define MAS3_UR		0x00000002
+#define MAS3_SR		0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL	0x000F0000
+#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
+#define MAS4_X0D	0x00000040
+#define MAS4_X1D	0x00000020
+#define MAS4_WD		0x00000010
+#define MAS4_ID		0x00000008
+#define MAS4_MD		0x00000004
+#define MAS4_GD		0x00000002
+#define MAS4_ED		0x00000001
+
+#define MAS6_SPID0	0x3FFF0000
+#define MAS6_SPID1	0x00007FFE
+#define MAS6_SAS	0x00000001
+#define MAS6_SPID	MAS6_SPID0
+
+#define MAS7_RPN	0xFFFFFFFF
+
+#define FSL_BOOKE_MAS0(tlbsel,esel,nv) \
+		(MAS0_TLBSEL(tlbsel) | MAS0_ESEL(esel) | MAS0_NV(nv))
+#define FSL_BOOKE_MAS1(v,iprot,tid,ts,tsize) \
+		((((v) << 31) & MAS1_VALID)             |\
+		(((iprot) << 30) & MAS1_IPROT)          |\
+		(MAS1_TID(tid))				|\
+		(((ts) << 12) & MAS1_TS)                |\
+		(MAS1_TSIZE(tsize)))
+#define FSL_BOOKE_MAS2(epn, wimge) \
+		(((epn) & MAS3_RPN) | (wimge))
+#define FSL_BOOKE_MAS3(rpn, user, perms) \
+		(((rpn) & MAS3_RPN) | (user) | (perms))
 
 #define BOOKE_PAGESZ_1K         0
 #define BOOKE_PAGESZ_4K         1
@@ -398,6 +413,10 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define BOOKE_PAGESZ_256M       9
 #define BOOKE_PAGESZ_1G		10
 #define BOOKE_PAGESZ_4G		11
+#define BOOKE_PAGESZ_16GB	12
+#define BOOKE_PAGESZ_64GB	13
+#define BOOKE_PAGESZ_256GB	14
+#define BOOKE_PAGESZ_1TB	15
 
 #if defined(CONFIG_MPC86xx)
 #define LAWBAR_BASE_ADDR	0x00FFFFFF
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 9fbbdf8..86c5df2 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -424,6 +424,8 @@
 #define SPRN_IVOR15	0x19f	/* Interrupt Vector Offset Register 15 */
 
 /* e500 definitions */
+#define SPRN_L1CFG0     0x203   /* L1 Cache Configuration Register 0 */
+#define SPRN_L1CFG1     0x204   /* L1 Cache Configuration Register 1 */
 #define SPRN_L1CSR0     0x3f2   /* L1 Data Cache Control and Status Register 0 */
 #define   L1CSR0_CPE            0x00010000	/* Data Cache Parity Enable */
 #define   L1CSR0_DCFI           0x00000002      /* Data Cache Flash Invalidate */
@@ -621,6 +623,8 @@
 #define MCSRR1	SPRN_MCSRR1
 #define L1CSR0	SPRN_L1CSR0
 #define L1CSR1	SPRN_L1CSR1
+#define L1CFG0	SPRN_L1CFG0
+#define L1CFG1	SPRN_L1CFG1
 #define MCSR	SPRN_MCSR
 #define MMUCSR0	SPRN_MMUCSR0
 #define BUCSR	SPRN_BUCSR
diff --git a/include/common.h b/include/common.h
index 493417f..9ef9344 100644
--- a/include/common.h
+++ b/include/common.h
@@ -197,6 +197,8 @@ int	print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
 void	main_loop	(void);
 int	run_command	(const char *cmd, int flag);
 int	readline	(const char *const prompt);
+int	readline_into_buffer	(const char *const prompt, char * buffer);
+int	parse_line (char *, char *[]);
 void	init_cmd_timeout(void);
 void	reset_cmd_timeout(void);
 
@@ -227,6 +229,7 @@ extern ulong load_addr;		/* Default Load Address */
 /* common/cmd_nvedit.c */
 int	env_init     (void);
 void	env_relocate (void);
+int	envmatch     (uchar *, int);
 char	*getenv	     (char *);
 int	getenv_r     (char *name, char *buf, unsigned len);
 int	saveenv	     (void);
@@ -278,6 +281,9 @@ int	misc_init_r   (void);
 /* common/exports.c */
 void	jumptable_init(void);
 
+/* api/api.c */
+void	api_init (void);
+
 /* common/memsize.c */
 long	get_ram_size  (volatile long *, long);
 
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
new file mode 100644
index 0000000..f7020b4
--- /dev/null
+++ b/include/configs/ATUM8548.h
@@ -0,0 +1,458 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * atum8548 board configuration file
+ *
+ * Please refer to doc/README.atum8548 for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Debug Options, Disable in production
+#define ET_DEBUG		1
+#define CONFIG_PANIC_HANG	1
+#define DEBUG			1
+*/
+
+/* CPLD Configuration Options */
+#define MPC85xx_ATUM_CLKOCR            0x80000002
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1	/* MPC8548 specific */
+
+#define CONFIG_PCI		1	/* enable any pci type devices */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCI2             1	/* PCI controller 2 */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET	1	/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM	1 	/* Use SPD EEPROM for DDR setup*/
+#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ	33000000
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#define CONFIG_CMD_SDRAM 		1	/* SDRAM DIMM SPD info printout */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+#undef	CFG_DRAM_TEST
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
+#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR parameters
+     */
+    #define CFG_SDRAM_SIZE	1024		/* DDR is 1024MB */
+    #define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
+    #define CFG_DDR_CS0_CONFIG	0x80000102
+    #define CFG_DDR_TIMING_0	0x00260802
+    #define CFG_DDR_TIMING_1	0x38355322
+    #define CFG_DDR_TIMING_2	0x039048c7
+    #define CFG_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
+    #define CFG_DDR_MODE	0x00000432
+    #define CFG_DDR_INTERVAL	0x05150100
+    #define DDR_SDRAM_CFG	0x43000000
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * based on flash chip S29GL01GP
+ * One bank, 128M, using the CFI driver.
+ * Boot from BR0 bank at 0xf800_0000
+ *
+ * BR0:
+ *    Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001    BR0
+ *
+ * OR0:
+ *    Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
+ *    Reserved ORx[17:18] = 00
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65    ORx
+ */
+
+#define CFG_BOOT_BLOCK		0xf8000000	/* boot TLB block */
+#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 128M */
+
+#define CFG_BR0_PRELIM		0xf8001001
+
+#define	CFG_OR0_PRELIM		0xf8000E65
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */
+
+
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER    1
+#define CFG_FLASH_CFI           1
+#define CFG_FLASH_EMPTY_INFO
+
+/*
+ * Flash on the LocalBus
+ */
+#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
+
+/* Memory */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE	0xC0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2800000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#endif
+
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#endif	/* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"eTSEC2"
+#define CONFIG_TSEC4	1
+#define CONFIG_TSEC4_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+#define TSEC3_FLAGS		TSEC_GIGABIT
+#define TSEC4_FLAGS		TSEC_GIGABIT
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC2"
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR	 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR	 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR	 00:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR	 10.101.43.142
+
+#define CONFIG_HOSTNAME	 atum
+#define CONFIG_ROOTPATH	 /nfsroot
+#define CONFIG_BOOTFILE	 /tftpboot/uImage.atum
+#define CONFIG_UBOOTPATH	/tftpboot/uboot.bin	/* TFTP server */
+
+#define CONFIG_SERVERIP	 10.101.43.10
+#define CONFIG_GATEWAYIP 10.101.45.1
+#define CONFIG_NETMASK	 255.255.248.0
+
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"	                \
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr - $dtbaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 0321650..1603c9c 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -473,7 +473,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 35637f9..211f11d 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -294,7 +294,6 @@
 #endif
 
 /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
-/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
    keep reset. */
 #undef CFG_FLASH_CFI
 #ifdef CFG_FLASH_CFI
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index c9a9c83..7bc4e27 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -192,7 +192,7 @@
 
 #define CFG_LBC_MRTPR	0x20000000  /*TODO */ 	/* LB refresh timer prescal, 266MHz/32 */
 
-/* drivers/nand/nand.c */
+/* drivers/mtd/nand/nand.c */
 #define CFG_NAND_BASE		0xE2800000	/* 0xF0000000 */
 #define CFG_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS		1
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 35e1d63..afce7fb 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -460,13 +460,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index e376c11..2868dcb 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -319,13 +319,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d2e7237..c83382f 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 545a76c..5a96db5 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -444,13 +444,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 3f382e5..90beb25 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -512,13 +512,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 90ef3d6..76d673c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d4e0de0..5f10555 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -490,13 +490,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 59f490e..2b089d9 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -480,13 +480,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 575bbae..7f485c6 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -573,13 +573,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-    #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index a6a1e73..f0d0399 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -366,13 +366,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 9a17e3d..ae2645c 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -365,13 +365,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index c2aa2cc..cf98324 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -496,7 +496,7 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 /* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */
 #define CFG_ISA_IO 0xE8000000
-/* see also drivers/videomodes.c */
+/* see also drivers/video/videomodes.c */
 #define CFG_DEFAULT_VIDEO_MODE 0x303
 #endif
 
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index f2c3699..3ca85b8 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -395,13 +395,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 05cef87..50ad7dd 100644
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -181,7 +181,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 6dbd392..f3b1a53 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -417,13 +417,6 @@
  */
 #define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value	*/
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 69310d4..e1d1483 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -168,7 +168,7 @@ SIB at Block62 End Block62 address 0x24f80000
 /*
  * Move up the U-Boot & monitor area if more flash is fitted.
  * If this U-Boot is to be run on Integrators with varying flash sizes,
- * drivers/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
+ * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
  * register and dynamically assign CFG_ENV_ADDR & CFG_MONITOR_BASE
  * - CFG_MONITOR_BASE is set to indicate that the environment is not
  * embedded in the boot monitor(s) area
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 8623ed3..0be46ea 100644
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -179,7 +179,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 8ae8efe..88a3f6e 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -283,7 +283,7 @@
  * CFI FLASH driver setup
  */
 #define CFG_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
 #define CFG_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
 #define CFG_FLASH_PROTECTION	1	/* Use hardware sector protection */
 
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 16ce2f6..e3bde4f 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -174,7 +174,7 @@
  * FLASH driver setup
  */
 #define CFG_FLASH_CFI          1       /* Flash memory is CFI compliant */
-#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_CFI_DRIVER   1       /* Use drivers/mtd/cfi_flash.c */
 
 #define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
 
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
new file mode 100644
index 0000000..c050a06
--- /dev/null
+++ b/include/configs/sbc8548.h
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2007 Wind River Systems <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * sbc8548 board configuration file
+ *
+ * Please refer to doc/README.sbc85xx for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1	/* MPC8548 specific */
+#define CONFIG_SBC8548		1	/* SBC8548 board specific */
+
+#undef CONFIG_PCI		/* enable any pci type devices */
+#undef CONFIG_PCI1		/* PCI controller 1 */
+#undef CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ	66000000 /* SBC8548 default SYSCLK */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+	#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, one 8MB the other 64MB, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff80_0000
+ * Alternate BR6/OR6 bank at 0xfb80_0000
+ *
+ * BR0:
+ *    Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 8 bits = BRx[19:20] = 01
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801    BR0
+ *
+ * BR6:
+ *    Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
+ *    Port Size = 32 bits = BRx[19:20] = 11
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801    BR6
+ *
+ * OR0:
+ *    Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
+ *    XAM = OR0[17:18] = 11
+ *    CSNT = OR0[20] = 1
+ *    ACS = half cycle delay = OR0[21:22] = 11
+ *    SCY = 6 = OR0[24:27] = 0110
+ *    TRLX = use relaxed timing = OR0[29] = 1
+ *    EAD = use external address latch delay = OR0[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR0
+ *
+ * OR6:
+ *    Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
+ *    XAM = OR6[17:18] = 11
+ *    CSNT = OR6[20] = 1
+ *    ACS = half cycle delay = OR6[21:22] = 11
+ *    SCY = 6 = OR6[24:27] = 0110
+ *    TRLX = use relaxed timing = OR6[29] = 1
+ *    EAD = use external address latch delay = OR6[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65    OR6
+ */
+
+#define CFG_BOOT_BLOCK		0xff800000	/* start of 8MB Flash */
+#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */
+
+#define CFG_BR0_PRELIM		0xff800801
+#define CFG_BR6_PRELIM		0xfb801801
+
+#define	CFG_OR0_PRELIM		0xff806e65
+#define	CFG_OR6_PRELIM		0xfc006e65
+
+#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+/* CS5 = Local bus peripherals controlled by the EPLD */
+
+#define CFG_BR5_PRELIM		0xf8000801
+#define CFG_OR5_PRELIM		0xff006e65
+#define CFG_EPLD_BASE		0xf8000000
+#define CFG_LED_DISP_BASE	0xf8000000
+#define CFG_USER_SWITCHES_BASE	0xf8100000
+#define CFG_BD_REV		0xf8300000
+#define CFG_EEPROM_BASE		0xf8b00000
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * Base Register 3 and Option Register 3 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR3, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ */
+
+#define CFG_BR3_PRELIM		0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR3, need:
+ *    64MB mask for AM, OR3[0:7] = 1111 1100
+ *		   XAM, OR3[17:18] = 11
+ *    10 columns OR3[19-21] = 011
+ *    12 rows   OR3[23-25] = 011
+ *    EAD set for extra time OR[31] = 0
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
+ */
+
+#define CFG_OR3_PRELIM		0xfc006cc0
+
+#define CFG_LBC_LCRR		0x00000002    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ *                  or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
+				| CFG_LBC_LSDMR_PRETOACT7	\
+				| CFG_LBC_LSDMR_ACTTORW7	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC4		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		400000000 /* get_bus_freq(0) */
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x50
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe2800000
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#endif
+
+#ifdef CONFIG_RIO
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE	0xC0000000
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"eTSEC2"
+#define CONFIG_TSEC4
+#define CONFIG_TSEC4_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC0"
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR	 02:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	 02:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR	 02:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR	 02:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR	 192.168.0.55
+
+#define CONFIG_HOSTNAME	 sbc8548
+#define CONFIG_ROOTPATH	 /opt/eldk/ppc_85xx
+#define CONFIG_BOOTFILE	 /uImage
+#define CONFIG_UBOOTPATH /u-boot.bin	/* TFTP server */
+
+#define CONFIG_SERVERIP	 192.168.0.2
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK	 255.255.255.0
+
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS0\0"				\
+ "ramdiskaddr=2000000\0"			\
+ "ramdiskfile=uRamdisk\0"			\
+ "fdtaddr=c00000\0"				\
+ "fdtfile=sbc8548.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND	CONFIG_RAMBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index defc428..b71ba78 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -377,13 +377,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-  #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c5ae0cd..3baa32c 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -357,13 +357,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index c6e7953..9457bce 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -391,13 +391,6 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
 
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE		32768
-#define CFG_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Internal Definitions
  *
diff --git a/include/e500.h b/include/e500.h
index 0d73260..1971eee 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -17,100 +17,6 @@ typedef struct
 
 #endif  /* _ASMLANGUAGE */
 
-/* Motorola E500 core provides 16 TLB1 entries; they can be used for
- * initial memory mapping like legacy BAT registers do. Usually we
- * use four MAS registers(MAS0-3) to operate on TLB1 entries.
- *
- * While there are 16 Entries with variable Page Sizes in TLB1,
- * there are also 256 Entries with fixed 4K pages in TLB0.
- *
- * We also need LAWs(Local Access Window) to associate a range of
- * the local 32-bit address space with a particular target interface
- * such as PCI/PCI-X, RapidIO, Local Bus and DDR SDRAM.
- *
- * We put TLB1/LAW code here because memory mapping is board-specific
- * instead of cpu-specific.
- *
- * While these macros are all nominally for TLB1 by name, they can
- * also be used for TLB0 as well.
- */
-
-
-/*
- * Convert addresses to Effective and Real Page Numbers.
- * Grab the high 20-bits and shift 'em down, dropping the "byte offset".
- */
-#define E500_TLB_EPN(addr)	(((addr) >> 12) & 0xfffff)
-#define E500_TLB_RPN(addr)	(((addr) >> 12) & 0xfffff)
-
-
-/* MAS0
- * tlbsel(TLB Select):0,1
- * esel(Entry Select): 0,1,2,...,15 for TLB1
- * nv(Next victim):0,1
- */
-#define TLB1_MAS0(tlbsel,esel,nv) \
-			((((tlbsel) << 28) & MAS0_TLBSEL)       |\
-			(((esel) << 16) & MAS0_ESEL )           |\
-			(nv) )
-
-
-/* MAS1
- * v(TLB valid bit):0,1
- * iprot(invalidate protect):0,1
- * tid(translation identity):8bit to match process IDs
- * ts(translation space,comparing with MSR[IS,DS]): 0,1
- * tsize(translation size):1,2,...,9(4K,16K,64K,256K,1M,4M,16M,64M,256M)
- */
-#define TLB1_MAS1(v,iprot,tid,ts,tsize) \
-			((((v) << 31) & MAS1_VALID)             |\
-			(((iprot) << 30) & MAS1_IPROT)          |\
-			(((tid) << 16) & MAS1_TID)              |\
-			(((ts) << 12) & MAS1_TS)                |\
-			(((tsize) << 8) & MAS1_TSIZE) )
-
-
-/* MAS2
- * epn(effective page number):20bits
- * sharen(Shared cache state):0,1
- * x0,x1(implementation specific page attribute):0,1
- * w,i,m,g,e(write-through,cache-inhibited,memory coherency,guarded,
- *      endianness):0,1
- */
-#define TLB1_MAS2(epn,sharen,x0,x1,w,i,m,g,e) \
-			((((epn) << 12) & MAS2_EPN)             |\
-			(((sharen) << 9) & MAS2_SHAREN)         |\
-			(((x0) << 6) & MAS2_X0)                 |\
-			(((x1) << 5) & MAS2_X1)                 |\
-			(((w) << 4) & MAS2_W)                   |\
-			(((i) << 3) & MAS2_I)                   |\
-			(((m) << 2) & MAS2_M)                   |\
-			(((g) << 1) & MAS2_G)                   |\
-			(e) )
-
-
-/* MAS3
- * rpn(real page number):20bits
- * u0-u3(user bits, useful for page table management in OS):0,1
- * ux,sx,uw,sw,ur,sr(permission bits, user and supervisor read,
- *      write,execute permission).
- */
-#define TLB1_MAS3(rpn,u0,u1,u2,u3,ux,sx,uw,sw,ur,sr) \
-			((((rpn) << 12) & MAS3_RPN)             |\
-			(((u0) << 9) & MAS3_U0)                 |\
-			(((u1) << 8) & MAS3_U1)                 |\
-			(((u2) << 7) & MAS3_U2)                 |\
-			(((u3) << 6) & MAS3_U3)                 |\
-			(((ux) << 5) & MAS3_UX)                 |\
-			(((sx) << 4) & MAS3_SX)                 |\
-			(((uw) << 3) & MAS3_UW)                 |\
-			(((sw) << 2) & MAS3_SW)                 |\
-			(((ur) << 1) & MAS3_UR)                 |\
-			(sr) )
-
-
 #define RESET_VECTOR	0xfffffffc
-#define CACHELINE_MASK	(CFG_CACHELINE_SIZE - 1) /* Address mask for cache
-						     line aligned data. */
 
 #endif	/* __E500_H__ */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 58e26ab..7836f28 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -48,6 +48,7 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size);
 void fdt_fixup_ethernet(void *fdt, bd_t *bd);
 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 			 const void *val, int len, int create);
+void fdt_fixup_qe_firmware(void *fdt);
 
 #ifdef CONFIG_OF_HAS_UBOOT_ENV
 int fdt_env(void *fdt);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 49ff80f..4cc4a7d 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -129,7 +129,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_ECC_HW3_256	2
 /* Hardware ECC 3 byte ECC per 512 Byte data */
 #define NAND_ECC_HW3_512	3
-/* Hardware ECC 3 byte ECC per 512 Byte data */
+/* Hardware ECC 6 byte ECC per 512 Byte data */
 #define NAND_ECC_HW6_512	4
 /* Hardware ECC 8 byte ECC per 512 Byte data */
 #define NAND_ECC_HW8_512	6