Patch by TsiChung Liew, 23 Sep 2004:

- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards

7 files changed, 1129 insertions, 1 deletions

diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index e3ff631..b12fe3a 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -50,6 +50,14 @@ typedef	struct	global_data {
 	unsigned long	ipb_clk;
 	unsigned long	pci_clk;
 #endif
+#if defined(CONFIG_MPC8220)
+	unsigned long   bExtUart;
+	unsigned long   inp_clk;
+	unsigned long   pci_clk;
+	unsigned long   vco_clk;
+	unsigned long   pev_clk;
+	unsigned long   flb_clk;
+#endif
 	unsigned long	ram_size;	/* RAM size */
 	unsigned long	reloc_off;	/* Relocation Offset */
 	unsigned long	reset_status;	/* reset status register at boot	*/
diff --git a/include/asm-ppc/immap_8220.h b/include/asm-ppc/immap_8220.h
new file mode 100644
index 0000000..f9595f4
--- /dev/null
+++ b/include/asm-ppc/immap_8220.h
@@ -0,0 +1,246 @@
+/*
+ * MPC8220 Internal Memory Map
+ * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * The Internal Memory Map of the 8220.
+ *
+ */
+#ifndef __IMMAP_MPC8220__
+#define __IMMAP_MPC8220__
+
+/*
+ * System configuration registers.
+ */
+typedef struct sys_conf {
+    u16     mbar;       /* 0x00 */
+    u16     res1;
+
+    u16     res2;       /* 0x04 */
+    u16     sdramds;
+
+    u32     res3[6];    /* 0x08 */
+
+    u32     cscfg[6];   /* 0x20 */
+
+    u32     res4[2];    /* 0x38 */
+
+    u8      res5[3];    /* 0x40 */
+    u8      rstctrl;
+
+    u8      res6[3];    /* 0x44 */
+    u8      rststat;
+
+    u32     res7[2];    /* 0x48 */
+
+    u32     jtagid;     /* 0x50 */
+} sysconf8220_t;
+
+
+/*
+ * Memory controller registers.
+ */
+typedef struct mem_ctlr {
+    ushort  mode;           /* 0x100 */
+    ushort  res1;
+    u32     ctrl;           /* 0x104 */
+    u32     cfg1;           /* 0x108 */
+    u32     cfg2;           /* 0x10c */
+} memctl8220_t;
+
+/*
+ * XLB Arbitration registers
+ */
+typedef struct xlb_arb
+{
+    uint    res1[16];       /* 0x200 */
+    uint    config;         /* 0x240 */
+    uint    version;        /* 0x244 */
+    uint    status;         /* 0x248 */
+    uint    intEnable;      /* 0x24c */
+    uint    addrCap;        /* 0x250 */
+    uint    busSigCap;      /* 0x254 */
+    uint    addrTenTimeOut; /* 0x258 */
+    uint    dataTenTimeOut; /* 0x25c */
+    uint    busActTimeOut;  /* 0x260 */
+    uint    mastPriEn;      /* 0x264 */
+    uint    mastPriority;   /* 0x268 */
+    uint    baseAddr;       /* 0x26c */
+} xlbarb8220_t;
+
+/*
+ * Flexbus registers
+ */
+typedef struct flexbus
+{
+    ushort  csar0;          /* 0x00 */
+    ushort  res1;
+    uint    csmr0;          /* 0x04 */
+    uint    cscr0;          /* 0x08 */
+
+    ushort  csar1;          /* 0x0c */
+    ushort  res2;
+    uint    csmr1;          /* 0x10 */
+    uint    cscr1;          /* 0x14 */
+
+    ushort  csar2;          /* 0x18 */
+    ushort  res3;
+    uint    csmr2;          /* 0x1c */
+    uint    cscr2;          /* 0x20 */
+
+    ushort  csar3;          /* 0x24 */
+    ushort  res4;
+    uint    csmr3;          /* 0x28 */
+    uint    cscr3;          /* 0x2c */
+
+    ushort  csar4;          /* 0x30 */
+    ushort  res5;
+    uint    csmr4;          /* 0x34 */
+    uint    cscr4;          /* 0x38 */
+
+    ushort  csar5;          /* 0x3c */
+    ushort  res6;
+    uint    csmr5;          /* 0x40 */
+    uint    cscr5;          /* 0x44 */
+} flexbus8220_t;
+
+/*
+ * GPIO registers
+ */
+typedef struct gpio
+{
+    u32     out;        /* 0x00 */
+    u32     obs;        /* 0x04 */
+    u32     obc;        /* 0x08 */
+    u32     obt;        /* 0x0c */
+    u32     en;         /* 0x10 */
+    u32     ebs;        /* 0x14 */
+    u32     ebc;        /* 0x18 */
+    u32     ebt;        /* 0x1c */
+    u32     mc;         /* 0x20 */
+    u32     st;         /* 0x24 */
+    u32     intr;       /* 0x28 */
+} gpio8220_t;
+
+/*
+ * General Purpose Timer registers
+ */
+typedef struct gptimer
+{
+    u8  OCPW;
+    u8  OctIct;
+    u8  Control;
+    u8  Mode;
+
+    u16 Prescl;  /* Prescale */
+    u16 Count;   /* Count */
+
+    u16 PwmWid;  /* PWM Width */
+    u8  PwmOp;   /* Output Polarity */
+    u8  PwmLd;   /* Immediate Update */
+
+    u16 Capture; /* Capture internal counter */
+    u8  OvfPin;  /* Ovf and Pin */
+    u8  Int;     /* Interrupts */
+} gptmr8220_t;
+
+/*
+ * PSC registers
+ */
+typedef struct psc
+{
+    u32 mr1_2;             /* 0x00 Mode reg 1 & 2 */
+    u32 sr_csr;            /* 0x04 Status/Clock Select reg */
+    u32 cr;                /* 0x08 Command reg */
+    u8  xmitbuf[4];        /* 0x0c Receive/Transmit Buffer */
+    u32 ipcr_acr;          /* 0x10 Input Port Change/Auxiliary Control reg */
+    u32 isr_imr;           /* 0x14 Interrupt Status/Mask reg */
+    u32 ctur;              /* 0x18 Counter Timer Upper reg */
+    u32 ctlr;              /* 0x1c Counter Timer Lower reg */
+    u32 rsvd1[4];          /* 0x20 ... 0x2c */
+    u32 ivr;               /* 0x30 Interrupt Vector reg */
+    u32 ipr;               /* 0x34 Input Port reg */
+    u32 opsetr;            /* 0x38 Output Port Set reg */
+    u32 opresetr;          /* 0x3c Output Port Reset reg */
+    u32 sicr;              /* 0x40 PSC/IrDA control reg */
+    u32 ircr1;             /* 0x44 IrDA control reg 1*/
+    u32 ircr2;             /* 0x48 IrDA control reg 2*/
+    u32 irsdr;             /* 0x4c IrDA SIR Divide reg */
+    u32 irmdr;             /* 0x50 IrDA MIR Divide reg */
+    u32 irfdr;             /* 0x54 PSC IrDA FIR Divide reg */
+    u32 rfnum;             /* 0x58 RX-FIFO counter */
+    u32 txnum;             /* 0x5c TX-FIFO counter */
+    u32 rfdata;            /* 0x60 RX-FIFO data */
+    u32 rfstat;            /* 0x64 RX-FIFO status */
+    u32 rfcntl;            /* 0x68 RX-FIFO control */
+    u32 rfalarm;           /* 0x6c RX-FIFO alarm */
+    u32 rfrptr;            /* 0x70 RX-FIFO read pointer */
+    u32 rfwptr;            /* 0x74 RX-FIFO write pointer */
+    u32 rflfrptr;          /* 0x78 RX-FIFO last read frame pointer */
+    u32 rflfwptr;          /* 0x7c RX-FIFO last write frame pointer */
+
+    u32 tfdata;            /* 0x80 TX-FIFO data */
+    u32 tfstat;            /* 0x84 TX-FIFO status */
+    u32 tfcntl;            /* 0x88 TX-FIFO control */
+    u32 tfalarm;           /* 0x8c TX-FIFO alarm */
+    u32 tfrptr;            /* 0x90 TX-FIFO read pointer */
+    u32 tfwptr;            /* 0x94 TX-FIFO write pointer */
+    u32 tflfrptr;          /* 0x98 TX-FIFO last read frame pointer */
+    u32 tflfwptr;          /* 0x9c TX-FIFO last write frame pointer */
+} psc8220_t;
+
+/*
+ * Interrupt Controller registers
+ */
+typedef struct interrupt_controller {
+} intctl8220_t;
+
+
+/* Fast controllers
+*/
+
+/*
+ * I2C registers
+ */
+typedef struct i2c
+{
+    u8   adr;            /* 0x00 */
+    u8   res1[3];
+    u8   fdr;            /* 0x04 */
+    u8   res2[3];
+    u8   cr;             /* 0x08 */
+    u8   res3[3];
+    u8   sr;             /* 0x0C */
+    u8   res4[3];
+    u8   dr;             /* 0x10 */
+    u8   res5[3];
+    u32  reserved0;      /* 0x14 */
+    u32  reserved1;      /* 0x18 */
+    u32  reserved2;      /* 0x1c */
+    u8   icr;            /* 0x20 */
+    u8   res6[3];
+} i2c8220_t;
+
+/*
+ * Port Configuration Registers
+ */
+typedef struct pcfg
+{
+    uint    pcfg0;          /* 0x00 */
+    uint    pcfg1;          /* 0x04 */
+    uint    pcfg2;          /* 0x08 */
+    uint    pcfg3;          /* 0x0c */
+} pcfg8220_t;
+
+/* ...and the whole thing wrapped up....
+*/
+typedef struct immap {
+    sysconf8220_t   im_sysconf; /* System Configuration */
+    memctl8220_t    im_memctl;  /* Memory Controller */
+    xlbarb8220_t    im_xlbarb;  /* XLB Arbitration */
+    psc8220_t       im_psc;     /* PSC controller */
+    flexbus8220_t   im_fb;      /* FlexBus Controller */
+    i2c8220_t       im_i2c;     /* I2C control/status */
+    pcfg8220_t      im_pcfg;    /* Port configuration */
+} immap_t;
+
+#endif /* __IMMAP_MPC8220__ */
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 4608a28..72eabb4 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -45,6 +45,14 @@ typedef struct bd_info {
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	bi_mbar_base;	/* base of internal registers */
 #endif
+#if defined(CONFIG_MPC8220)
+	unsigned long	bi_mbar_base;	/* base of internal registers */
+	unsigned long   bi_inpfreq;     /* Input Freq, In MHz */
+	unsigned long   bi_pcifreq;     /* PCI Freq, in MHz */
+	unsigned long   bi_pevfreq;     /* PEV Freq, in MHz */
+	unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */
+	unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */
+#endif
 	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
 	unsigned long	bi_ip_addr;	/* IP Address */
 	unsigned char	bi_enetaddr[6];	/* Ethernet adress */
diff --git a/include/common.h b/include/common.h
index 353a15a..697bd7d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -63,6 +63,8 @@ typedef volatile unsigned char	vu_char;
 #endif
 #elif defined(CONFIG_5xx)
 #include <asm/5xx_immap.h>
+#elif defined(CONFIG_MPC8220)
+#include <asm/immap_8220.h>
 #elif defined(CONFIG_8260)
 #if   defined(CONFIG_MPC8247) \
    || defined(CONFIG_MPC8248) \
@@ -355,6 +357,7 @@ void	trap_init     (ulong);
     defined (CONFIG_74x)	|| \
     defined (CONFIG_75x)	|| \
     defined (CONFIG_74xx)	|| \
+    defined (CONFIG_MPC8220)	|| \
     defined(CONFIG_MPC85xx)
 unsigned char	in8(unsigned int);
 void		out8(unsigned int, unsigned char);
@@ -399,6 +402,9 @@ int	prt_8260_clks (void);
 #if defined(CONFIG_MPC5xxx)
 int	prt_mpc5xxx_clks (void);
 #endif
+#if defined(CONFIG_MPC8220)
+int	prt_mpc8220_clks (void);
+#endif
 #ifdef CONFIG_4xx
 ulong	get_OPB_freq (void);
 ulong	get_PCI_freq (void);
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
new file mode 100644
index 0000000..5cf2a04
--- /dev/null
+++ b/include/configs/Alaska8220.h
@@ -0,0 +1,309 @@
+/*
+ * (C) Copyright 2004
+ * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MPC8220		1
+#define CONFIG_ALASKA8220	1	/* ... on Alaska board	*/
+
+/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
+   determine the CPU speed. */
+#define CFG_MPC8220_CLKIN	30000000/* ... running at 30MHz */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5   /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC */
+#define CONFIG_EXTUART_CONSOLE	1
+
+#ifdef CONFIG_EXTUART_CONSOLE
+#   define CFG_NS16550
+#   define CFG_NS16550_REG_SIZE 1
+#   define CFG_NS16550_COM1	(CFG_CPLD_BASE + 0x1008)
+#endif
+
+#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
+
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Supported commands
+ */
+/* CONFIG_CMD_DFL includes CFG_CMD_BDI (bdinfo), CFG_CMD_LOADS (loads),
+   CFG_CMD_LOADB (loadb), CFG_CMD_IMI (iminfo), CFG_CMD_FLASH
+   (flinfo, erase, protect), CFG_CMD_MEMORY (md, mm, nm, mw, cp, cmp,
+   crc, base, loop, mtest), CFG_CMD_ENV (printenv, setenv, saveenv),
+   CFG_CMD_BOOTD (bootd), CFG_CMD_CONSOLE (coninfo), CFG_CMD_NET (bootp,
+   tftpboot, rarpboot), CFG_CMD_RUN, CFG_CMD_MISC (sleep, etc),
+   CFG_CMD_BSP, CFG_CMD_IMLS, CFG_CMD_FPGA */
+
+#define CONFIG_COMMANDS	    (CONFIG_CMD_DFL  | \
+			     CFG_CMD_BOOTD   | \
+			     CFG_CMD_CACHE   | \
+			     CFG_CMD_DIAG    | \
+			     CFG_CMD_EEPROM  | \
+			     CFG_CMD_ELF     | \
+			     CFG_CMD_I2C     | \
+			     CFG_CMD_NET     | \
+			     CFG_CMD_PING    | \
+			     CFG_CMD_REGINFO | \
+			     CFG_CMD_SDRAM     \
+			     )
+/*			       CFG_CMD_DHCP    | \ */
+/*			       CFG_CMD_MII     | \ */
+/*			       CFG_CMD_PCI     | \ */
+/*			       CFG_CMD_USB */
+
+#   define CONFIG_NET_MULTI
+/*#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#   define CONFIG_NET_MULTI
+#else
+#   undef CONFIG_NET_MULTI
+#endif*/
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
+#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
+#define CONFIG_IPADDR		192.162.1.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP		192.162.1.1
+#define CONFIG_GATEWAYIP	192.162.1.1
+#define CONFIG_HOSTNAME		Alaska
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1
+#define CFG_I2C_MODULE		1
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+/*
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		256
+*/
+
+/* If CFG_AMD_BOOT is defined, the the system will boot from AMD.
+   else undefined it will boot from Intel Strata flash */
+#define CFG_AMD_BOOT		1
+
+/*
+ * Flexbus Chipselect configuration
+ */
+#if defined (CFG_AMD_BOOT)
+#define CFG_CS0_BASE		0xfff0
+#define CFG_CS0_MASK		0x00080000  /* 512 KB */
+#define CFG_CS0_CTRL		0x003f0d40
+
+#define CFG_CS1_BASE		0xfe00
+#define CFG_CS1_MASK		0x01000000  /* 16 MB */
+#define CFG_CS1_CTRL		0x003f1540
+#else
+#define CFG_CS0_BASE		0xff00
+#define CFG_CS0_MASK		0x01000000  /* 16 MB */
+#define CFG_CS0_CTRL		0x003f1540
+
+#define CFG_CS1_BASE		0xfe08
+#define CFG_CS1_MASK		0x00080000  /* 512 KB */
+#define CFG_CS1_CTRL		0x003f0d40
+#endif
+
+#define CFG_CS2_BASE		0xf100
+#define CFG_CS2_MASK		0x00040000
+#define CFG_CS2_CTRL		0x003f1140
+
+#define CFG_CS3_BASE		0xf200
+#define CFG_CS3_MASK		0x00040000
+#define CFG_CS3_CTRL		0x003f1100
+
+
+#define CFG_FLASH0_BASE		(CFG_CS0_BASE << 16)
+#define CFG_FLASH1_BASE		(CFG_CS1_BASE << 16)
+
+#if defined (CFG_AMD_BOOT)
+#define CFG_AMD_BASE		CFG_FLASH0_BASE
+#define CFG_INTEL_BASE		CFG_FLASH1_BASE + 0xf00000
+#define CFG_FLASH_BASE		CFG_AMD_BASE
+#else
+#define CFG_INTEL_BASE		CFG_FLASH0_BASE + 0xf00000
+#define CFG_AMD_BASE		CFG_FLASH1_BASE
+#define CFG_FLASH_BASE		CFG_INTEL_BASE
+#endif
+
+#define CFG_CPLD_BASE		(CFG_CS2_BASE << 16)
+#define CFG_FPGA_BASE		(CFG_CS3_BASE << 16)
+
+
+#define CFG_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CFG_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
+#define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
+#define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
+
+#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
+#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
+
+#define CFG_FLASH_CHECKSUM
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#if defined (CFG_AMD_BOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#else
+#define CFG_ENV_ADDR		(CFG_FLASH0_BASE + CFG_CS0_MASK - PHYS_INTEL_SECT_SIZE)
+#define CFG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
+#define CFG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
+#define CFG_ENV1_ADDR		(CFG_FLASH1_BASE + CFG_CS1_MASK - PHYS_AMD_SECT_SIZE)
+#define CFG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
+#define CFG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
+#endif
+
+#define CONFIG_ENV_OVERWRITE	1
+
+#if defined CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_EEPROM
+#elif defined CFG_ENV_IS_IN_EEPROM
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#endif
+
+#ifndef CFG_JFFS2_FIRST_SECTOR
+#define CFG_JFFS2_FIRST_SECTOR	0
+#endif
+#ifndef CFG_JFFS2_FIRST_BANK
+#define CFG_JFFS2_FIRST_BANK	0
+#endif
+#ifndef CFG_JFFS2_NUM_BANKS
+#define CFG_JFFS2_NUM_BANKS	1
+#endif
+#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+#define CFG_SRAM_BASE		(CFG_MBAR + 0x20000)
+#define CFG_SRAM_SIZE		0x8000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	(CFG_MBAR + 0x20000)
+#define CFG_INIT_RAM_END	0x8000	/* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
+#define CFG_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
+#define CFG_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC8220_FEC	1
+#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
+#define CONFIG_PHY_ADDR		0x18
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			    /* undef to save memory	*/
+#define CFG_PROMPT		"=> "	    /* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	    /* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	    /* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	    /* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE  /* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0x00100000  /* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
+
+#define CFG_LOAD_ADDR		0x100000    /* default load address */
+
+#define CFG_HZ			1000	    /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+
+#endif /* __CONFIG_H */
diff --git a/include/mpc8220.h b/include/mpc8220.h
new file mode 100644
index 0000000..fe22b8e
--- /dev/null
+++ b/include/mpc8220.h
@@ -0,0 +1,551 @@
+/*
+ * include/mpc8220.h
+ *
+ * Prototypes, etc. for the Motorola MPC8220
+ * embedded cpu chips
+ *
+ * 2004 (c) Freescale, Inc.
+ * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __MPC8220_H__
+#define __MPC8220_H__
+
+/* Processor name */
+#if defined(CONFIG_MPC8220)
+#define CPU_ID_STR	    "MPC8220"
+#endif
+
+/* Exception offsets (PowerPC standard) */
+#define EXC_OFF_SYS_RESET   0x0100
+
+/* Internal memory map */
+/* MPC8220 Internal Register MMAP */
+#define MMAP_MBAR	(CFG_MBAR + 0x00000000) /* chip selects		     */
+#define MMAP_MEMCTL	(CFG_MBAR + 0x00000100) /* sdram controller	     */
+#define MMAP_XLBARB	(CFG_MBAR + 0x00000200) /* xlb arbitration control   */
+#define MMAP_CDM	(CFG_MBAR + 0x00000300) /* clock distribution module */
+#define MMAP_VDOPLL	(CFG_MBAR + 0x00000400) /* video PLL		     */
+#define MMAP_FB		(CFG_MBAR + 0x00000500) /* flex bus controller	     */
+#define MMAP_PCFG	(CFG_MBAR + 0x00000600) /* port config		     */
+#define MMAP_ICTL	(CFG_MBAR + 0x00000700) /* interrupt controller	     */
+#define MMAP_GPTMR	(CFG_MBAR + 0x00000800) /* general purpose timers    */
+#define MMAP_SLTMR	(CFG_MBAR + 0x00000900) /* slice timers		     */
+#define MMAP_GPIO	(CFG_MBAR + 0x00000A00) /* gpio module		     */
+#define MMAP_XCPCI	(CFG_MBAR + 0x00000B00) /* pci controller	     */
+#define MMAP_PCIARB	(CFG_MBAR + 0x00000C00) /* pci arbiter		     */
+#define MMAP_EXTDMA1	(CFG_MBAR + 0x00000D00) /* external dma1	     */
+#define MMAP_EXTDMA2	(CFG_MBAR + 0x00000E00) /* external dma1	     */
+#define MMAP_USBH	(CFG_MBAR + 0x00001000) /* usb host		     */
+#define MMAP_CMTMR	(CFG_MBAR + 0x00007f00) /* comm timers		     */
+#define MMAP_DMA	(CFG_MBAR + 0x00008000) /* dma			     */
+#define MMAP_USBD	(CFG_MBAR + 0x00008200) /* usb device		     */
+#define MMAP_COMMPCI	(CFG_MBAR + 0x00008400) /* pci comm Bus regs	     */
+#define MMAP_1284	(CFG_MBAR + 0x00008500) /* 1284			     */
+#define MMAP_PEV	(CFG_MBAR + 0x00008600) /* print engine video	     */
+#define MMAP_PSC1	(CFG_MBAR + 0x00008800) /* psc1 block		     */
+#define MMAP_I2C	(CFG_MBAR + 0x00008f00) /* i2c controller	     */
+#define MMAP_FEC1	(CFG_MBAR + 0x00009000) /* fast ethernet 1	     */
+#define MMAP_FEC2	(CFG_MBAR + 0x00009800) /* fast ethernet 2	     */
+#define MMAP_JBIGRAM	(CFG_MBAR + 0x0000a000) /* jbig RAM		     */
+#define MMAP_JBIG	(CFG_MBAR + 0x0000c000) /* jbig			     */
+#define MMAP_PDLA	(CFG_MBAR + 0x00010000) /*			     */
+#define MMAP_SRAMCFG	(CFG_MBAR + 0x0001ff00) /* SRAM config		     */
+#define MMAP_SRAM	(CFG_MBAR + 0x00020000) /* SRAM			     */
+
+#define SRAM_SIZE	0x8000			/* 32 KB */
+
+/* ------------------------------------------------------------------------ */
+/*
+ * Macro for Programmable Serial Channel
+ */
+/* equates for mode reg. 1 for channel	A or B */
+#define PSC_MR1_RX_RTS		0x80000000    /* receiver RTS enabled */
+#define PSC_MR1_RX_INT		0x40000000    /* receiver intrupt enabled */
+#define PSC_MR1_ERR_MODE	0x20000000    /* block error mode */
+#define PSC_MR1_PAR_MODE_MULTI	0x18000000    /* multi_drop mode */
+#define PSC_MR1_NO_PARITY	0x10000000    /* no parity mode */
+#define PSC_MR1_ALWAYS_0	0x08000000    /* force parity mode */
+#define PSC_MR1_ALWAYS_1	0x0c000000    /* force parity mode */
+#define PSC_MR1_EVEN_PARITY	0x00000000    /* parity mode */
+#define PSC_MR1_ODD_PARITY	0x04000000    /* 0 = even, 1 = odd */
+#define PSC_MR1_BITS_CHAR_8	0x03000000    /* 8 bits */
+#define PSC_MR1_BITS_CHAR_7	0x02000000    /* 7 bits */
+#define PSC_MR1_BITS_CHAR_6	0x01000000    /* 6 bits */
+#define PSC_MR1_BITS_CHAR_5	0x00000000    /* 5 bits */
+
+/* equates for mode reg. 2 for channel	A or B */
+#define PSC_MR2_NORMAL_MODE	0x00000000    /* normal channel mode */
+#define PSC_MR2_AUTO_MODE	0x40000000    /* automatic channel mode */
+#define PSC_MR2_LOOPBACK_LOCL	0x80000000    /* local loopback channel mode */
+#define PSC_MR2_LOOPBACK_REMT	0xc0000000    /* remote loopback channel mode */
+#define PSC_MR2_TX_RTS		0x20000000    /* transmitter RTS enabled */
+#define PSC_MR2_TX_CTS		0x10000000    /* transmitter CTS enabled */
+#define PSC_MR2_STOP_BITS_2	0x0f000000    /* 2 stop bits */
+#define PSC_MR2_STOP_BITS_1	0x07000000    /* 1 stop bit */
+
+/* equates for status reg. A or B */
+#define PSC_SR_BREAK		0x80000000    /* received break */
+#define PSC_SR_NEOF		PSC_SR_BREAK  /* Next byte is EOF - MIR/FIR */
+#define PSC_SR_FRAMING		0x40000000    /* framing error */
+#define PSC_SR_PHYERR		PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */
+#define PSC_SR_PARITY		0x20000000    /* parity error */
+#define PSC_SR_CRCERR		PSC_SR_PARITY /* CRC error */
+#define PSC_SR_OVERRUN		0x10000000    /* overrun error */
+#define PSC_SR_TXEMT		0x08000000    /* transmitter empty */
+#define PSC_SR_TXRDY		0x04000000    /* transmitter ready*/
+#define PSC_SR_FFULL		0x02000000    /* fifo full */
+#define PSC_SR_RXRDY		0x01000000    /* receiver ready */
+#define PSC_SR_DEOF		0x00800000    /* Detect EOF or RX-FIFO contain EOF */
+#define PSC_SR_ERR		0x00400000    /* Error Status including FIFO */
+
+/* equates for clock select reg. */
+#define PSC_CSRX16EXT_CLK	0x1110	/* x 16 ext_clock */
+#define PSC_CSRX1EXT_CLK	0x1111	/* x 1 ext_clock  */
+
+/* equates for command reg. A or B */
+#define PSC_CR_NO_COMMAND	0x00000000    /* no command */
+#define PSC_CR_RST_MR_PTR_CMD	0x10000000    /* reset mr pointer command */
+#define PSC_CR_RST_RX_CMD	0x20000000    /* reset receiver command */
+#define PSC_CR_RST_TX_CMD	0x30000000    /* reset transmitter command */
+#define PSC_CR_RST_ERR_STS_CMD	0x40000000    /* reset error status cmnd */
+#define PSC_CR_RST_BRK_INT_CMD	0x50000000    /* reset break int. command */
+#define PSC_CR_STR_BREAK_CMD	0x60000000    /* start break command */
+#define PSC_CR_STP_BREAK_CMD	0x70000000    /* stop break command */
+#define PSC_CR_RX_ENABLE	0x01000000    /* receiver enabled */
+#define PSC_CR_RX_DISABLE	0x02000000    /* receiver disabled */
+#define PSC_CR_TX_ENABLE	0x04000000    /* transmitter enabled */
+#define PSC_CR_TX_DISABLE	0x08000000    /* transmitter disabled */
+
+/* equates for input port change reg. */
+#define PSC_IPCR_SYNC		0x80000000    /* Sync Detect */
+#define PSC_IPCR_D_CTS		0x10000000    /* Delta CTS */
+#define PSC_IPCR_CTS		0x01000000    /* CTS - current state of PSC_CTS */
+
+/* equates for auxiliary control reg. (timer and counter clock selects) */
+#define PSC_ACR_BRG		0x80000000    /* for 68681 compatibility
+						 baud rate gen select
+						 0 = set 1; 1 = set 2
+						 equates are set 2 ONLY */
+#define PSC_ACR_TMR_EXT_CLK_16	0x70000000    /* xtnl clock divided by 16 */
+#define PSC_ACR_TMR_EXT_CLK	0x60000000    /* external clock */
+#define PSC_ACR_TMR_IP2_16	0x50000000    /* ip2 divided by 16 */
+#define PSC_ACR_TMR_IP2		0x40000000    /* ip2 */
+#define PSC_ACR_CTR_EXT_CLK_16	0x30000000    /* xtnl clock divided by 16 */
+#define PSC_ACR_CTR_TXCB	0x20000000    /* channel B xmitr clock */
+#define PSC_ACR_CTR_TXCA	0x10000000    /* channel A xmitr clock */
+#define PSC_ACR_CTR_IP2		0x00000000    /* ip2 */
+#define PSC_ACR_IEC0		0x01000000    /* interrupt enable ctrl for D_CTS */
+
+/* equates for int. status reg. */
+#define PSC_ISR_IPC		0x80000000    /* input port change*/
+#define PSC_ISR_BREAK		0x04000000    /* delta break */
+#define PSC_ISR_RX_RDY		0x02000000    /* receiver rdy /fifo full */
+#define PSC_ISR_TX_RDY		0x01000000    /* transmitter ready */
+#define PSC_ISR_DEOF		0x00800000    /* Detect EOF / RX-FIFO contains EOF */
+#define PSC_ISR_ERR		0x00400000    /* Error Status including FIFO */
+
+/* equates for int. mask reg. */
+#define PSC_IMR_CLEAR		0xff000000    /* Clear the imr */
+#define PSC_IMR_IPC		0x80000000    /* input port change*/
+#define PSC_IMR_BREAK		0x04000000    /* delta break */
+#define PSC_IMR_RX_RDY		0x02000000    /* rcvr ready / fifo full */
+#define PSC_IMR_TX_RDY		0x01000000    /* transmitter ready */
+#define PSC_IMR_DEOF		0x00800000    /* Detect EOF / RX-FIFO contains EOF */
+#define PSC_IMR_ERR		0x00400000    /* Error Status including FIFO */
+
+/* equates for input port reg. */
+#define PSC_IP_LPWRB		0x80000000    /* Low power mode in Ac97 */
+#define PSC_IP_TGL		0x40000000    /* test usage */
+#define PSC_IP_CTS		0x01000000    /* CTS */
+
+/* equates for output port bit set reg. */
+#define PSC_OPSET_RTS		0x01000000    /* Assert PSC_RTS output */
+
+/* equates for output port bit reset reg. */
+#define PSC_OPRESET_RTS		0x01000000    /* Assert PSC_RTS output */
+
+/* equates for rx FIFO number of data reg. */
+#define PSC_RFNUM(x)		((x&0xff)<<24)/* receive count */
+
+/* equates for tx FIFO number of data reg. */
+#define PSC_TFNUM(x)		((x&0xff)<<24)/* receive count */
+
+/* equates for rx FIFO status reg */
+#define PSC_RFSTAT_TAG(x)	((x&3)<<28)   /* tag */
+#define PSC_RFSTAT_FRAME0	0x08	      /* Frame Indicator 0 */
+#define PSC_RFSTAT_FRAME1	0x04	      /* Frame Indicator 1 */
+#define PSC_RFSTAT_FRAME2	0x02	      /* Frame Indicator 2 */
+#define PSC_RFSTAT_FRAME3	0x01	      /* Frame Indicator 3 */
+#define PSC_RFSTAT_FRAME(x)	((x&0x0f)<<24)/* Frame indicator */
+#define PSC_RFSTAT_ERR		0x00400000    /* Fifo err */
+#define PSC_RFSTAT_UF		0x00200000    /* Underflow */
+#define PSC_RFSTAT_OF		0x00100000    /* overflow */
+#define PSC_RFSTAT_FR		0x00080000    /* frame ready */
+#define PSC_RFSTAT_FULL		0x00040000    /* full */
+#define PSC_RFSTAT_ALARM	0x00020000    /* alarm */
+#define PSC_RFSTAT_EMPTY	0x00010000    /* empty */
+
+/* equates for tx FIFO status reg */
+#define PSC_TFSTAT_TAG(x)	((x&3)<<28)   /* tag */
+#define PSC_TFSTAT_FRAME0	0x08	      /* Frame Indicator 0 */
+#define PSC_TFSTAT_FRAME1	0x04	      /* Frame Indicator 1 */
+#define PSC_TFSTAT_FRAME2	0x02	      /* Frame Indicator 2 */
+#define PSC_TFSTAT_FRAME3	0x01	      /* Frame Indicator 3 */
+#define PSC_TFSTAT_FRAME(x)	((x&0x0f)<<24)/* Frame indicator */
+#define PSC_TFSTAT_ERR		0x00400000    /* Fifo err */
+#define PSC_TFSTAT_UF		0x00200000    /* Underflow */
+#define PSC_TFSTAT_OF		0x00100000    /* overflow */
+#define PSC_TFSTAT_FR		0x00080000    /* frame ready */
+#define PSC_TFSTAT_FULL		0x00040000    /* full */
+#define PSC_TFSTAT_ALARM	0x00020000    /* alarm */
+#define PSC_TFSTAT_EMPTY	0x00010000    /* empty */
+
+/* equates for rx FIFO control reg. */
+#define PSC_RFCNTL_WTAG(x)	((x&3)<<29)   /* Write tag */
+#define PSC_RFCNTL_FRAME	0x08000000    /* Frame mode enable */
+#define PSC_RFCNTL_GR(x)	((x&7)<<24)   /* Granularity */
+
+/* equates for tx FIFO control reg. */
+#define PSC_TFCNTL_WTAG(x)	((x&3)<<29)   /* Write tag */
+#define PSC_TFCNTL_FRAME	0x08000000    /* Frame mode enable */
+#define PSC_TFCNTL_GR(x)	((x&7)<<24)   /* Granularity */
+
+/* equates for rx FIFO alarm reg */
+#define PSC_RFALARM(x)		(x&0x1ff)     /* Alarm */
+
+/* equates for tx FIFO alarm reg */
+#define PSC_TFALARM(x)		(x&0x1ff)     /* Alarm */
+
+/* equates for rx FIFO read pointer */
+#define PSC_RFRPTR(x)		(x&0x1ff)     /* read pointer */
+
+/* equates for tx FIFO read pointer */
+#define PSC_TFRPTR(x)		(x&0x1ff)     /* read pointer */
+
+/* equates for rx FIFO write pointer */
+#define PSC_RFWPTR(x)		(x&0x1ff)     /* write pointer */
+
+/* equates for rx FIFO write pointer */
+#define PSC_TFWPTR(x)		(x&0x1ff)     /* write pointer */
+
+/* equates for rx FIFO last read frame pointer reg */
+#define PSC_RFLRFPTR(x)		(x&0x1ff)     /* last read frame pointer */
+
+/* equates for tx FIFO last read frame pointer reg */
+#define PSC_TFLRFPTR(x)		(x&0x1ff)     /* last read frame pointer */
+
+/* equates for rx FIFO last write frame pointer reg */
+#define PSC_RFLWFPTR(x)		(x&0x1ff)     /* last write frame pointer */
+
+/* equates for tx FIFO last write frame pointer reg */
+#define PSC_TFLWFPTR(x)		(x&0x1ff)     /* last write frame pointer */
+
+
+/* ------------------------------------------------------------------------ */
+/*
+ * Macro for General Purpose Timer
+ */
+/* Enable and Mode Select */
+#define GPT_OCT(x)	    (x & 0x3)<<4/* Output Compare Type */
+#define GPT_ICT(x)	    (x & 0x3)	/* Input Capture Type */
+#define GPT_CTRL_WDEN	    0x80	/* Watchdog Enable */
+#define GPT_CTRL_CE	    0x10	/* Counter Enable */
+#define GPT_CTRL_STPCNT	    0x04	/* Stop continous */
+#define GPT_CTRL_ODRAIN	    0x02	/* Open Drain */
+#define GPT_CTRL_INTEN	    0x01	/* Interrupt Enable */
+#define GPT_MODE_GPIO(x)    (x & 0x3)<<4/* Gpio Mode Type */
+#define GPT_TMS_ICT	    0x01	/* Input Capture Enable */
+#define GPT_TMS_OCT	    0x02	/* Output Capture Enable */
+#define GPT_TMS_PWM	    0x03	/* PWM Capture Enable */
+#define GPT_TMS_SGPIO	    0x04	/* PWM Capture Enable */
+
+#define GPT_PWM_WIDTH(x)    (x & 0xffff)
+
+/* Status */
+#define GPT_STA_CAPTURE(x)  (x & 0xffff)/* Read of internal counter */
+
+#define GPT_OVFPIN_OVF(x)   (x & 0x70)	/* Internal counter roll over */
+#define GPT_OVFPIN_PIN	    0x01	/* Input pin - Timer 0 and 1 */
+
+#define GPT_INT_TEXP	    0x08	/* Timer Expired in Internal Timer mode */
+#define GPT_INT_PWMP	    0x04	/* PWM end of period occurred */
+#define GPT_INT_COMP	    0x02	/* OC reference event occurred */
+#define GPT_INT_CAPT	    0x01	/* IC reference event occurred */
+
+/* ------------------------------------------------------------------------ */
+/*
+ * Port configuration
+ */
+#define CFG_FEC1_PORT0_CONFIG	0x00000000
+#define CFG_FEC1_PORT1_CONFIG	0x00000000
+#define CFG_1284_PORT0_CONFIG	0x55555557
+#define CFG_1284_PORT1_CONFIG	0x80000000
+#define CFG_FEC2_PORT2_CONFIG	0x00000000
+#define CFG_PEV_PORT2_CONFIG	0x55555540
+#define CFG_GP0_PORT0_CONFIG	0xaaaaaaa0
+#define CFG_GP1_PORT2_CONFIG	0xaaaaa000
+#define CFG_PSC_PORT3_CONFIG	0x00000000
+#define CFG_CS2_PORT3_CONFIG	0x10000000
+#define CFG_CS3_PORT3_CONFIG	0x40000000
+#define CFG_CS4_PORT3_CONFIG	0x00000400
+#define CFG_CS5_PORT3_CONFIG	0x00000100
+#define CFG_I2C_PORT3_CONFIG	0x003c0000
+
+/* ------------------------------------------------------------------------ */
+/*
+ * DRAM configuration
+ */
+
+/* Field definitions for the control register */
+#define CTL_MODE_ENABLE_SHIFT	    31
+#define CTL_CKE_SHIFT		    30
+#define CTL_DDR_SHIFT		    29
+#define CTL_REFRESH_SHIFT	    28
+#define CTL_ADDRMUX_SHIFT	    24
+#define CTL_PRECHARGE_SHIFT	    23
+#define CTL_DRIVE_RULE_SHIFT	    22
+#define CTL_REFRESH_INTERVAL_SHIFT  16
+#define CTL_DQSOEN_SHIFT	    8
+#define CTL_BUFFERED_SHIFT	    4
+#define CTL_REFRESH_CMD_SHIFT	    2
+#define CTL_PRECHARGE_CMD_SHIFT	    1
+
+#define CTL_MODE_ENABLE		    (1<<CTL_MODE_ENABLE_SHIFT)
+#define CTL_CKE_HIGH		    (1<<CTL_CKE_SHIFT)
+#define CTL_DDR_MODE		    (1<<CTL_DDR_SHIFT)
+#define CTL_REFRESH_ENABLE	    (1<<CTL_REFRESH_SHIFT)
+#define CTL_ADDRMUX(value)	    ((value)<<CTL_ADDRMUX_SHIFT)
+#define CTL_A8PRECHARGE		    (1<<CTL_PRECHARGE_SHIFT)
+#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT)
+#define CTL_DQSOEN(value)	    ((value)<<CTL_DQSOEN_SHIFT)
+#define CTL_BUFFERED		    (1<<CTL_BUFFERED_SHIFT)
+#define CTL_REFRESH_CMD		    (1<<CTL_REFRESH_CMD_SHIFT)
+#define CTL_PRECHARGE_CMD	    (1<<CTL_PRECHARGE_CMD_SHIFT)
+
+/* Field definitions for config register 1 */
+
+#define CFG1_SRD2RWP_SHIFT	    28
+#define CFG1_SWT2RWP_SHIFT	    24
+#define CFG1_RLATENCY_SHIFT	    20
+#define CFG1_ACT2WR_SHIFT	    16
+#define CFG1_PRE2ACT_SHIFT	    12
+#define CFG1_REF2ACT_SHIFT	    8
+#define CFG1_WLATENCY_SHIFT	    4
+
+#define CFG1_SRD2RWP(value)	    ((value)<<CFG1_SRD2RWP_SHIFT)
+#define CFG1_SWT2RWP(value)	    ((value)<<CFG1_SWT2RWP_SHIFT)
+#define CFG1_RLATENCY(value)	    ((value)<<CFG1_RLATENCY_SHIFT)
+#define CFG1_ACT2WR(value)	    ((value)<<CFG1_ACT2WR_SHIFT)
+#define CFG1_PRE2ACT(value)	    ((value)<<CFG1_PRE2ACT_SHIFT)
+#define CFG1_REF2ACT(value)	    ((value)<<CFG1_REF2ACT_SHIFT)
+#define CFG1_WLATENCY(value)	    ((value)<<CFG1_WLATENCY_SHIFT)
+
+/* Field definitions for config register 2 */
+#define CFG2_BRD2RP_SHIFT	    28
+#define CFG2_BWT2RWP_SHIFT	    24
+#define CFG2_BRD2WT_SHIFT	    20
+#define CFG2_BURSTLEN_SHIFT	    16
+
+#define CFG2_BRD2RP(value)	    ((value)<<CFG2_BRD2RP_SHIFT)
+#define CFG2_BWT2RWP(value)	    ((value)<<CFG2_BWT2RWP_SHIFT)
+#define CFG2_BRD2WT(value)	    ((value)<<CFG2_BRD2WT_SHIFT)
+#define CFG2_BURSTLEN(value)	    ((value)<<CFG2_BURSTLEN_SHIFT)
+
+/* Field definitions for the mode/extended mode register - mode
+ * register access
+ */
+#define MODE_REG_SHIFT		    30
+#define MODE_OPMODE_SHIFT	    25
+#define MODE_CL_SHIFT		    22
+#define MODE_BT_SHIFT		    21
+#define MODE_BURSTLEN_SHIFT	    18
+#define MODE_CMD_SHIFT		    16
+
+#define MODE_MODE		    0
+#define MODE_OPMODE(value)	    ((value)<<MODE_OPMODE_SHIFT)
+#define MODE_CL(value)		    ((value)<<MODE_CL_SHIFT)
+#define MODE_BT_INTERLEAVED	    (1<<MODE_BT_SHIFT)
+#define MODE_BT_SEQUENTIAL	    (0<<MODE_BT_SHIFT)
+#define MODE_BURSTLEN(value)	    ((value)<<MODE_BURSTLEN_SHIFT)
+#define MODE_CMD		    (1<<MODE_CMD_SHIFT)
+
+#define MODE_BURSTLEN_8		    3
+#define MODE_BURSTLEN_4		    2
+#define MODE_BURSTLEN_2		    1
+
+#define MODE_CL_2		    2
+#define MODE_CL_2p5		    6
+#define MODE_OPMODE_NORMAL	    0
+#define MODE_OPMODE_RESETDLL	    2
+
+
+/* Field definitions for the mode/extended mode register - extended
+ * mode register access
+ */
+#define MODE_X_DLL_SHIFT	    18 /* DLL enable/disable */
+#define MODE_X_DS_SHIFT		    19 /* Drive strength normal/reduced */
+#define MODE_X_QFC_SHIFT	    20 /* QFC function (whatever that is) */
+#define MODE_X_OPMODE_SHIFT	    21
+
+#define MODE_EXTENDED		    (1<<MODE_REG_SHIFT)
+#define MODE_X_DLL_ENABLE	    0
+#define MODE_X_DLL_DISABLE	    (1<<MODE_X_DLL_SHIFT)
+#define MODE_X_DS_NORMAL	    0
+#define MODE_X_DS_REDUCED	    (1<<MODE_X_DS_SHIFT)
+#define MODE_X_QFC_DISABLED	    0
+#define MODE_X_OPMODE(value)	    ((value)<<MODE_X_OPMODE_SHIFT)
+
+#ifndef __ASSEMBLY__
+/*
+ * DMA control/status registers.
+ */
+struct mpc8220_dma {
+    u32 taskBar;	/* DMA + 0x00 */
+    u32 currentPointer; /* DMA + 0x04 */
+    u32 endPointer;	/* DMA + 0x08 */
+    u32 variablePointer;/* DMA + 0x0c */
+
+    u8 IntVect1;	/* DMA + 0x10 */
+    u8 IntVect2;	/* DMA + 0x11 */
+    u16 PtdCntrl;	/* DMA + 0x12 */
+
+    u32 IntPend;	/* DMA + 0x14 */
+    u32 IntMask;	/* DMA + 0x18 */
+
+    u16 tcr_0;		/* DMA + 0x1c */
+    u16 tcr_1;		/* DMA + 0x1e */
+    u16 tcr_2;		/* DMA + 0x20 */
+    u16 tcr_3;		/* DMA + 0x22 */
+    u16 tcr_4;		/* DMA + 0x24 */
+    u16 tcr_5;		/* DMA + 0x26 */
+    u16 tcr_6;		/* DMA + 0x28 */
+    u16 tcr_7;		/* DMA + 0x2a */
+    u16 tcr_8;		/* DMA + 0x2c */
+    u16 tcr_9;		/* DMA + 0x2e */
+    u16 tcr_a;		/* DMA + 0x30 */
+    u16 tcr_b;		/* DMA + 0x32 */
+    u16 tcr_c;		/* DMA + 0x34 */
+    u16 tcr_d;		/* DMA + 0x36 */
+    u16 tcr_e;		/* DMA + 0x38 */
+    u16 tcr_f;		/* DMA + 0x3a */
+
+    u8 IPR0;		/* DMA + 0x3c */
+    u8 IPR1;		/* DMA + 0x3d */
+    u8 IPR2;		/* DMA + 0x3e */
+    u8 IPR3;		/* DMA + 0x3f */
+    u8 IPR4;		/* DMA + 0x40 */
+    u8 IPR5;		/* DMA + 0x41 */
+    u8 IPR6;		/* DMA + 0x42 */
+    u8 IPR7;		/* DMA + 0x43 */
+    u8 IPR8;		/* DMA + 0x44 */
+    u8 IPR9;		/* DMA + 0x45 */
+    u8 IPR10;		/* DMA + 0x46 */
+    u8 IPR11;		/* DMA + 0x47 */
+    u8 IPR12;		/* DMA + 0x48 */
+    u8 IPR13;		/* DMA + 0x49 */
+    u8 IPR14;		/* DMA + 0x4a */
+    u8 IPR15;		/* DMA + 0x4b */
+    u8 IPR16;		/* DMA + 0x4c */
+    u8 IPR17;		/* DMA + 0x4d */
+    u8 IPR18;		/* DMA + 0x4e */
+    u8 IPR19;		/* DMA + 0x4f */
+    u8 IPR20;		/* DMA + 0x50 */
+    u8 IPR21;		/* DMA + 0x51 */
+    u8 IPR22;		/* DMA + 0x52 */
+    u8 IPR23;		/* DMA + 0x53 */
+    u8 IPR24;		/* DMA + 0x54 */
+    u8 IPR25;		/* DMA + 0x55 */
+    u8 IPR26;		/* DMA + 0x56 */
+    u8 IPR27;		/* DMA + 0x57 */
+    u8 IPR28;		/* DMA + 0x58 */
+    u8 IPR29;		/* DMA + 0x59 */
+    u8 IPR30;		/* DMA + 0x5a */
+    u8 IPR31;		/* DMA + 0x5b */
+
+    u32 res1;		/* DMA + 0x5c */
+    u32 res2;		/* DMA + 0x60 */
+    u32 res3;		/* DMA + 0x64 */
+    u32 MDEDebug;	/* DMA + 0x68 */
+    u32 ADSDebug;	/* DMA + 0x6c */
+    u32 Value1;		/* DMA + 0x70 */
+    u32 Value2;		/* DMA + 0x74 */
+    u32 Control;	/* DMA + 0x78 */
+    u32 Status;		/* DMA + 0x7c */
+    u32 EU00;		/* DMA + 0x80 */
+    u32 EU01;		/* DMA + 0x84 */
+    u32 EU02;		/* DMA + 0x88 */
+    u32 EU03;		/* DMA + 0x8c */
+    u32 EU04;		/* DMA + 0x90 */
+    u32 EU05;		/* DMA + 0x94 */
+    u32 EU06;		/* DMA + 0x98 */
+    u32 EU07;		/* DMA + 0x9c */
+    u32 EU10;		/* DMA + 0xa0 */
+    u32 EU11;		/* DMA + 0xa4 */
+    u32 EU12;		/* DMA + 0xa8 */
+    u32 EU13;		/* DMA + 0xac */
+    u32 EU14;		/* DMA + 0xb0 */
+    u32 EU15;		/* DMA + 0xb4 */
+    u32 EU16;		/* DMA + 0xb8 */
+    u32 EU17;		/* DMA + 0xbc */
+    u32 EU20;		/* DMA + 0xc0 */
+    u32 EU21;		/* DMA + 0xc4 */
+    u32 EU22;		/* DMA + 0xc8 */
+    u32 EU23;		/* DMA + 0xcc */
+    u32 EU24;		/* DMA + 0xd0 */
+    u32 EU25;		/* DMA + 0xd4 */
+    u32 EU26;		/* DMA + 0xd8 */
+    u32 EU27;		/* DMA + 0xdc */
+    u32 EU30;		/* DMA + 0xe0 */
+    u32 EU31;		/* DMA + 0xe4 */
+    u32 EU32;		/* DMA + 0xe8 */
+    u32 EU33;		/* DMA + 0xec */
+    u32 EU34;		/* DMA + 0xf0 */
+    u32 EU35;		/* DMA + 0xf4 */
+    u32 EU36;		/* DMA + 0xf8 */
+    u32 EU37;		/* DMA + 0xfc */
+};
+
+
+/* function prototypes */
+void loadtask(int basetask, int tasks);
+u32 dramSetup(void);
+
+#if defined(CONFIG_PSC_CONSOLE)
+int psc_serial_init (void);
+void psc_serial_putc(const char c);
+void psc_serial_puts (const char *s);
+int psc_serial_getc(void);
+int psc_serial_tstc(void);
+void psc_serial_setbrg(void);
+#endif
+
+#if defined (CONFIG_EXTUART_CONSOLE)
+int ext_serial_init (void);
+void ext_serial_putc(const char c);
+void ext_serial_puts (const char *s);
+int ext_serial_getc(void);
+int ext_serial_tstc(void);
+void ext_serial_setbrg(void);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __MPC8220_H__ */
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index d4d3b74..72d690e 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -175,7 +175,7 @@
 #define IM_IMMR		(IM_REGBASE+0x01a8)
 #define IM_SCCR		(IM_REGBASE+0x0c80)
 
-#elif defined(CONFIG_MPC5xxx)
+#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220)
 
 #define HID0_ICE_BITPOS	16
 #define HID0_DCE_BITPOS	17