The patch adds new POST tests for the Lwmon5 board. These are:

* External Watchdog test;
* dsPIC tests;
* FPGA test;
* GDC test;
* Sysmon tests.

Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>

3 files changed, 96 insertions, 4 deletions

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c3f10c7..6489e0e 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -86,6 +86,15 @@
 #define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
 						/* unused GPT0 COMP reg	*/
 
+/* Additional registers for watchdog timer post test */
+
+#define CFG_DSPIC_TEST_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP5)
+#define CFG_WATCHDOG_TIME_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP4)
+#define CFG_WATCHDOG_FLAGS_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP5)
+#define CFG_WATCHDOG_MAGIC	0x12480000
+#define CFG_WATCHDOG_MAGIC_MASK	0xFFFF0000
+#define CFG_DSPIC_TEST_MASK	0x00000001
+
 /*-----------------------------------------------------------------------
  * Serial Port
  *----------------------------------------------------------------------*/
@@ -156,7 +165,81 @@
 				 CFG_POST_MEMORY   | \
 				 CFG_POST_RTC      | \
 				 CFG_POST_SPR      | \
-				 CFG_POST_UART)
+				 CFG_POST_UART     | \
+				 CFG_POST_SYSMON   | \
+				 CFG_POST_WATCHDOG | \
+				 CFG_POST_DSP      | \
+				 CFG_POST_BSPEC1   | \
+				 CFG_POST_BSPEC2   | \
+				 CFG_POST_BSPEC3   | \
+				 CFG_POST_BSPEC4   | \
+				 CFG_POST_BSPEC5)
+
+#define CONFIG_POST_WATCHDOG  {\
+	"Watchdog timer test",				\
+	"watchdog",					\
+	"This test checks the watchdog timer.",		\
+	POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \
+	&lwmon5_watchdog_post_test,			\
+	NULL,						\
+	NULL,						\
+	CFG_POST_WATCHDOG				\
+	}
+
+#define CONFIG_POST_BSPEC1    {\
+	"dsPIC init test",				\
+	"dspic_init",					\
+	"This test returns result of dsPIC READY test run earlier.",	\
+	POST_RAM | POST_ALWAYS,				\
+	&dspic_init_post_test,				\
+	NULL,						\
+	NULL,						\
+	CFG_POST_BSPEC1					\
+	}
+
+#define CONFIG_POST_BSPEC2    {\
+	"dsPIC test",					\
+	"dspic",					\
+	"This test gets result of dsPIC POST and dsPIC version.",	\
+	POST_RAM | POST_ALWAYS,				\
+	&dspic_post_test,				\
+	NULL,						\
+	NULL,						\
+	CFG_POST_BSPEC2					\
+	}
+
+#define CONFIG_POST_BSPEC3    {\
+	"FPGA test",					\
+	"fpga",						\
+	"This test checks FPGA registers and memory.",	\
+	POST_RAM | POST_ALWAYS,				\
+	&fpga_post_test,				\
+	NULL,						\
+	NULL,						\
+	CFG_POST_BSPEC3					\
+	}
+
+#define CONFIG_POST_BSPEC4    {\
+	"GDC test",					\
+	"gdc",						\
+	"This test checks GDC registers and memory.",	\
+	POST_RAM | POST_ALWAYS,				\
+	&gdc_post_test,					\
+	NULL,						\
+	NULL,						\
+	CFG_POST_BSPEC4					\
+	}
+
+#define CONFIG_POST_BSPEC5    {\
+	"SYSMON1 test",					\
+	"sysmon1",					\
+	"This test checks GPIO_62_EPX pin indicating power failure.",	\
+	POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST,	\
+	&sysmon1_post_test,				\
+	NULL,						\
+	NULL,						\
+	CFG_POST_BSPEC5					\
+	}
 
 #define CFG_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
 #define CONFIG_LOGBUFFER
@@ -181,6 +264,7 @@
 #define CONFIG_RTC_PCF8563	1		/* enable Philips PCF8563 RTC	*/
 #define CFG_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
 #define CFG_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
+#define CFG_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
 
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
 #if 0
@@ -366,9 +450,6 @@
 #define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
 #define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
-/*
- * ToDo: Watchdog is not test fully, so exclude it for now
- */
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
 #define CONFIG_WD_PERIOD	40000	/* in usec */
 
@@ -431,10 +512,13 @@
 #define CFG_GPIO_PHY1_RST	12
 #define CFG_GPIO_FLASH_WP	14
 #define CFG_GPIO_PHY0_RST	22
+#define CFG_GPIO_DSPIC_READY	51
 #define CFG_GPIO_EEPROM_EXT_WP	55
+#define CFG_GPIO_HIGHSIDE	56
 #define CFG_GPIO_EEPROM_INT_WP	57
 #define CFG_GPIO_LIME_S		59
 #define CFG_GPIO_LIME_RST	60
+#define CFG_GPIO_SYSMON_STATUS	62
 #define CFG_GPIO_WATCHDOG	63
 
 /*-----------------------------------------------------------------------
diff --git a/include/post.h b/include/post.h
index c8062bb..12c0e92 100644
--- a/include/post.h
+++ b/include/post.h
@@ -93,6 +93,11 @@ extern int post_hotkeys_pressed(void);
 #define CFG_POST_CODEC		0x00002000
 #define CFG_POST_FPU		0x00004000
 #define CFG_POST_ECC		0x00008000
+#define CFG_POST_BSPEC1		0x00010000
+#define CFG_POST_BSPEC2		0x00020000
+#define CFG_POST_BSPEC3		0x00040000
+#define CFG_POST_BSPEC4		0x00080000
+#define CFG_POST_BSPEC5		0x00100000
 
 #endif /* CONFIG_POST */
 
diff --git a/include/ppc440.h b/include/ppc440.h
index 80dd332..6e3b68d 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -1431,6 +1431,9 @@
 #define   SDR0_MFR_PKT_REJ_POL         0x00200000   /* Packet Reject Polarity */
 
 #define GPT0_COMP6			0x00000098
+#define GPT0_COMP5			0x00000094
+#define GPT0_COMP4			0x00000090
+#define GPT0_COMP3			0x0000008C
 
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_USB2D0CR                 0x0320