Merge branch 'master' of git://www.denx.de/git/u-boot-arm

4 files changed, 298 insertions, 4 deletions

diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h
index 67c8419..4fdb9c6 100644
--- a/include/asm-arm/arch-arm1136/mux.h
+++ b/include/asm-arm/arch-arm1136/mux.h
@@ -28,6 +28,7 @@ typedef  unsigned int uint32;
 void muxSetupSDRC(void);
 void muxSetupGPMC(void);
 void muxSetupUsb0(void);
+void muxSetupUsbHost(void);
 void muxSetupUart3(void);
 void muxSetupI2C1(void);
 void muxSetupUART1(void);
@@ -53,6 +54,10 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE1	((volatile unsigned char *)0x4800008D)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE2	((volatile unsigned char *)0x4800008E)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE3	((volatile unsigned char *)0x4800008F)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE4	(0x48000090)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE5	(0x48000091)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE6	(0x48000092)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE7	(0x48000093)
 
 /* Pin Muxing registers used for SDRC */
 #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
@@ -70,6 +75,7 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
 #define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
 #define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
+#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
 
 #define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
 
@@ -151,8 +157,20 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_USB0_SE0		((volatile uint8 *)0x48000122)
 #define CONTROL_PADCONF_USB0_DAT		((volatile uint8 *)0x48000123)
 
+/* Pin Muxing registres used for USB1. */
+#define CONTROL_PADCONF_USB1_RCV	(0x480000EB)
+#define CONTROL_PADCONF_USB1_TXEN	(0x480000EC)
+
 /* Pin Muxing registers used for UART3/IRDA */
 #define CONTROL_PADCONF_UART3_TX_IRTX	((volatile uint8 *)0x48000118)
 #define CONTROL_PADCONF_UART3_RX_IRRX	((volatile uint8 *)0x48000119)
 
+/* Pin Muxing registers used for GPIO */
+#define CONTROL_PADCONF_GPIO69		(0x480000ED)
+#define CONTROL_PADCONF_GPIO70		(0x480000EE)
+#define CONTROL_PADCONF_GPIO102		(0x48000116)
+#define CONTROL_PADCONF_GPIO103		(0x48000117)
+#define CONTROL_PADCONF_GPIO104		(0x48000118)
+#define CONTROL_PADCONF_GPIO105		(0x48000119)
+
 #endif
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index d833035..0c11bec 100644
--- a/include/asm-arm/arch-arm1136/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
@@ -77,6 +77,20 @@
 #define GPMC_CONFIG5_1        (OMAP2420_GPMC_BASE+0xA0)
 #define GPMC_CONFIG6_1        (OMAP2420_GPMC_BASE+0xA4)
 #define GPMC_CONFIG7_1	      (OMAP2420_GPMC_BASE+0xA8)
+#define GPMC_CONFIG1_2        (OMAP2420_GPMC_BASE+0xC0)
+#define GPMC_CONFIG2_2        (OMAP2420_GPMC_BASE+0xC4)
+#define GPMC_CONFIG3_2        (OMAP2420_GPMC_BASE+0xC8)
+#define GPMC_CONFIG4_2        (OMAP2420_GPMC_BASE+0xCC)
+#define GPMC_CONFIG5_2        (OMAP2420_GPMC_BASE+0xD0)
+#define GPMC_CONFIG6_2        (OMAP2420_GPMC_BASE+0xD4)
+#define GPMC_CONFIG7_2        (OMAP2420_GPMC_BASE+0xD8)
+#define GPMC_CONFIG1_3        (OMAP2420_GPMC_BASE+0xF0)
+#define GPMC_CONFIG2_3        (OMAP2420_GPMC_BASE+0xF4)
+#define GPMC_CONFIG3_3        (OMAP2420_GPMC_BASE+0xF8)
+#define GPMC_CONFIG4_3        (OMAP2420_GPMC_BASE+0xFC)
+#define GPMC_CONFIG5_3        (OMAP2420_GPMC_BASE+0x100)
+#define GPMC_CONFIG6_3        (OMAP2420_GPMC_BASE+0x104)
+#define GPMC_CONFIG7_3	      (OMAP2420_GPMC_BASE+0x108)
 
 /* SMS */
 #define OMAP2420_SMS_BASE 0x68008000
@@ -209,13 +223,24 @@
 #define SRAM_OFFSET2          0x0000F800
 #define SRAM_VECT_CODE       (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
 
-#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
-
-#define PERIFERAL_PORT_BASE   0x480FE003
-
 /* FPGA on Debug board.*/
 #define ETH_CONTROL_REG       (H4_CS1_BASE+0x30b)
 #define LAN_RESET_REGISTER    (H4_CS1_BASE+0x1c)
 #endif  /* endif CONFIG_2420H4 */
 
+#if defined(CONFIG_APOLLON)
+#define APOLLON_CS0_BASE	0x00000000	/* OneNAND */
+#define APOLLON_CS1_BASE	0x08000000	/* ethernet */
+#define APOLLON_CS2_BASE	0x10000000	/* OneNAND */
+#define APOLLON_CS3_BASE	0x18000000	/* NOR */
+
+#define ETH_CONTROL_REG		(APOLLON_CS1_BASE + 0x30b)
+#define LAN_RESET_REGISTER	(APOLLON_CS1_BASE + 0x1c)
+#endif	/* endif CONFIG_APOLLON */
+
+/* Common */
+#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
+
+#define PERIFERAL_PORT_BASE   0x480FE003
+
 #endif
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index f6a5b4f..ab19047 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -737,6 +737,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_CB3RUFC              726
 #define MACH_TYPE_MP2USB               727
 #define MACH_TYPE_AT91SAM9261EK        848
+#define MACH_TYPE_OMAP_APOLLON         919
 #define MACH_TYPE_PDNB3               1002
 #define MACH_TYPE_AT91SAM9260EK       1099
 #define MACH_TYPE_AT91RM9200DF        1119
@@ -6826,6 +6827,18 @@ extern unsigned int __machine_arch_type;
 # define machine_is_omap_h4()	(0)
 #endif
 
+#ifdef CONFIG_MACH_OMAP_APOLLON
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP_APOLLON
+# endif
+# define machine_is_omap_apollon()	(machine_arch_type == MACH_TYPE_OMAP_APOLLON)
+#else
+# define machine_is_omap_apollon()	(0)
+#endif
+
 #ifdef CONFIG_MACH_N10
 # ifdef machine_arch_type
 #  undef machine_arch_type
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
new file mode 100755
index 0000000..7727bc3
--- /dev/null
+++ b/include/configs/apollon.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuration settings for the 2420 Samsung Apollon board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM1136		1 /* This is an arm1136 CPU core */
+#define CONFIG_OMAP		1 /* in a TI OMAP core */
+#define CONFIG_OMAP2420		1 /* which is in a 2420 */
+#define CONFIG_OMAP2420_APOLLON	1
+#define CONFIG_APOLLON		1
+#define CONFIG_APOLLON_PLUS	1 /* If you have apollon plus 1.x */
+
+/* Clock config to target*/
+#define PRCM_CONFIG_I		1
+//#define PRCM_CONFIG_II	1
+
+/* Boot method */
+/* uncomment if you use NOR boot */
+//#define CFG_NOR_BOOT		1
+
+/* uncomment if you use NOR on CS3 */
+//#define CFG_USE_NOR		1
+
+#ifdef CFG_NOR_BOOT
+#undef CFG_USE_NOR
+#define CFG_USE_NOR		1
+#endif
+
+#include <asm/arch/omap2420.h>	/* get chip and board defs */
+
+#define	V_SCLK	12000000
+
+/* input clock of PLL */
+/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
+#define	CONFIG_SYS_CLK_FREQ	V_SCLK
+
+#undef	CONFIG_USE_IRQ	/* no support for IRQs */
+#define	CONFIG_MISC_INIT_R
+
+#define	CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define	CONFIG_SETUP_MEMORY_TAGS	1
+#define	CONFIG_INITRD_TAG	1
+#define	CONFIG_REVISION_TAG	1
+
+/*
+ * Size of malloc() pool
+ */
+#define	CFG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
+#define	CFG_MALLOC_LEN	(CFG_ENV_SIZE + SZ_128K)
+#define	CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SMC91c96 Etherent
+ */
+#define	CONFIG_DRIVER_LAN91C96
+#define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
+#define	CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define	V_NS16550_CLK	(48000000)	/* 48MHz (APLL96/2) */
+
+#define	CFG_NS16550
+#define	CFG_NS16550_SERIAL
+#define	CFG_NS16550_REG_SIZE	(-4)
+#define	CFG_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
+#define	CFG_NS16550_COM1	OMAP2420_UART1
+
+/*
+ * select serial console configuration
+ */
+#define	CONFIG_SERIAL1	1	/* UART1 on H4 */
+
+ /*
+ * I2C configuration
+ */
+#define	CONFIG_HARD_I2C
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	1
+#define	CONFIG_DRIVER_OMAP24XX_I2C
+
+/* allow to overwrite serial and ethaddr */ 
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_CONS_INDEX	1
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 
+#include	<config_cmd_default.h>
+
+#define	CONFIG_CMD_DHCP
+#define	CONFIG_CMD_DIAG
+#define	CONFIG_CMD_ONENAND
+
+#undef	CONFIG_CMD_AUTOSCRIPT
+
+#ifndef	CFG_USE_NOR
+# undef	CONFIG_CMD_FLASH
+# undef	CONFIG_CMD_IMLS
+#endif
+
+#define	CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
+
+#define	CONFIG_BOOTDELAY	1
+
+#define	CONFIG_NETMASK	255.255.255.0
+#define	CONFIG_IPADDR	192.168.116.25
+#define	CONFIG_SERVERIP	192.168.116.1
+#define	CONFIG_BOOTFILE	"uImage"
+#define	CONFIG_ETHADDR	00:0E:99:00:24:20
+
+#ifdef	CONFIG_APOLLON_PLUS
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#else
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"Image=tftp 0x80008000 Image; go 0x80008000\0"			\
+	"zImage=tftp 0x80180000 zImage; go 0x80180000\0"		\
+	"uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"		\
+	"uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"		\
+	"xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"	\
+	"syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"	\
+	"syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"	\
+	"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"	\
+	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+	"onesyncboot=run syncmode oneboot\0"				\
+	"bootcmd=run uboot\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	V_PROMPT	"Apollon # "
+
+#define	CFG_LONGHELP	/* undef to save memory */
+#define	CFG_PROMPT	V_PROMPT
+#define	CFG_CBSIZE	256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define	CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define	CFG_MAXARGS	16	/* max number of command args */
+#define	CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define	CFG_MEMTEST_START 	(OMAP2420_SDRC_CS0)	/* memtest works on */
+#define	CFG_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef	CFG_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR	(OMAP2420_SDRC_CS0)	/* default load address */
+
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) 
+ * or by 32KHz clk, or from external sig. This rate is divided by a local 
+ * divisor.
+ */
+#define	V_PVT	7	/* use with 12MHz/128 */
+
+#define	CFG_TIMERBASE	OMAP2420_GPT2
+#define	CFG_PVT	V_PVT	/* 2^(pvt+1) */
+#define	CFG_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below 
+ */
+#define	CONFIG_STACKSIZE SZ_128K	/* regular stack */
+#ifdef	CONFIG_USE_IRQ
+# define	CONFIG_STACKSIZE_IRQ SZ_4K	/* IRQ stack */
+# define	CONFIG_STACKSIZE_FIQ SZ_4K	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define	CONFIG_NR_DRAM_BANKS	1	/* CS1 may or may not be populated */
+#define	PHYS_SDRAM_1		OMAP2420_SDRC_CS0
+#define	PHYS_SDRAM_1_SIZE	SZ_128M
+#define	PHYS_SDRAM_2		OMAP2420_SDRC_CS1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#ifdef	CFG_USE_NOR
+/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
+# define	CFG_FLASH_BASE		0x18000000
+# define	CFG_MAX_FLASH_BANKS	1
+# define	CFG_MAX_FLASH_SECT	1024
+/*-----------------------------------------------------------------------
+
+ * CFI FLASH driver setup
+ */
+# define	CFG_FLASH_CFI	1	/* Flash memory is CFI compliant */
+# define	CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+//#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+# define	CFG_FLASH_PROTECTION	1	/* Use h/w sector protection*/
+
+#else	/* !CFG_USE_NOR */
+# define	CFG_NO_FLASH	1
+#endif	/* CFG_USE_NOR */
+
+/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
+#define	CFG_ONENAND_BASE	0x00000000
+#define	CFG_ENV_IS_IN_ONENAND	1
+#define CFG_ENV_ADDR		0x00020000
+
+#endif /* __CONFIG_H */