Remove legacy NAND and disk on chip references from boards.

Signed-off-by: Scott Wood <scottwood@freescale.com>

31 files changed, 0 insertions, 863 deletions

diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 24ffb00..98f6396 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -81,13 +81,9 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_ELF
 
 
-/* CONFIG_CMD_DOC required legacy NAND support */
-#define CONFIG_NAND_LEGACY
-
 #if 0
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 39f41e6..229a513 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -209,16 +209,8 @@
 
 /* For CATcenter there is only NAND on the module */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
 #define NAND_NO_RB
 
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
 #define CONFIG_SYS_NAND0_CE  (0x80000000 >> 1)	 /* our CE is GPIO1 */
 #define CONFIG_SYS_NAND0_CLE (0x80000000 >> 2)	 /* our CLE is GPIO2 */
 #define CONFIG_SYS_NAND0_ALE (0x80000000 >> 3)	 /* our ALE is GPIO3 */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index cf21fd9..6d76d9f 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -146,15 +146,6 @@
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
-/*-----------------------------------------------------------------------
  * Miscellaneous configuration options
  */
 
@@ -179,7 +170,6 @@
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_NFS
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 489378a..83b010c 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -182,7 +182,6 @@
 
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 
@@ -190,9 +189,6 @@
     #define CONFIG_CMD_PCI
 #endif
 
-
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/G2000.h b/include/configs/G2000.h
index bf9fd82..6819c3e 100644
--- a/include/configs/G2000.h
+++ b/include/configs/G2000.h
@@ -196,32 +196,12 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
 
 #define CONFIG_SYS_NAND_CE  (0x80000000 >> 1)	/* our CE is GPIO1 */
 #define CONFIG_SYS_NAND_CLE (0x80000000 >> 2)	/* our CLE is GPIO2 */
 #define CONFIG_SYS_NAND_ALE (0x80000000 >> 3)	/* our ALE is GPIO3 */
 #define CONFIG_SYS_NAND_RDY (0x80000000 >> 4)	/* our RDY is GPIO4 */
 
-#define NAND_DISABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CE);} while(0)
-#define NAND_ENABLE_CE(nand) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CE);} while(0)
-#define NAND_CTL_CLRALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_ALE);} while(0)
-#define NAND_CTL_SETALE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_ALE);} while(0)
-#define NAND_CTL_CLRCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_NAND_CLE);} while(0)
-#define NAND_CTL_SETCLE(nandptr) do { out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_NAND_CLE);} while(0)
-#define NAND_WAIT_READY(nand) while (!(in32(GPIO0_IR) & CONFIG_SYS_NAND_RDY))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index 8f18ab2..12f879a 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -244,10 +244,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_BEDBUG
 
-#if !defined(CONFIG_SC)
-    #define CONFIG_CMD_DOC
-#endif
-
 #ifdef CONFIG_POST
 #define CONFIG_CMD_DIAG
 #endif
@@ -279,9 +275,6 @@
 #define CONFIG_FPGA_VIRTEX2
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
-
-#define CONFIG_NAND_LEGACY
-
 /*
  * Verbose help from command monitor.
  */
@@ -738,16 +731,6 @@
 #define BOOTFLAG_WARM	0x02	/* Software reboot					*/
 
 /*
- * Disk On Chip (millenium) configuration
- */
-#if !defined(CONFIG_SC)
-#define CONFIG_SYS_MAX_DOC_DEVICE	1
-#undef	CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-#undef	CONFIG_SYS_DOC_PASSIVE_PROBE
-#endif
-
-/*
  * FEC interrupt assignment
  */
 #define FEC_INTERRUPT   SIU_LEVEL1
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 8315cfe..264e0e7 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -84,12 +84,9 @@
 
 #if !defined(CONFIG_MIP405T)
     #define CONFIG_CMD_USB
-    #define CONFIG_CMD_DOC
 #endif
 
 
-#define CONFIG_NAND_LEGACY
-
 #define	 CONFIG_SYS_HUSH_PARSER
 #define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
@@ -384,13 +381,6 @@
 #define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
- * Disk-On-Chip configuration
- ************************************************************/
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-/************************************************************
  * Keyboard support
  ************************************************************/
 #undef CONFIG_ISA_KEYBOARD
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index 796938a..8a197ad 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -497,95 +497,9 @@
 #define DSP_BASE	0xF1000000
 #define NAND_BASE	0xF1010000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
-	} while(0)
-
-#if CONFIG_NETPHONE_VERSION == 1
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#elif CONFIG_NETPHONE_VERSION == 2
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 724e807..dda6179 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -616,105 +616,6 @@
 #define ER_BASE		0xF1020000
 #define DUMMY_BASE	0xF1FF0000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE			NAND_BASE
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-/* #define NAND_NO_RB */
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PD3, CLE = PD4, CE = PD5, F_RY_BY = PC13 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 5)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 3)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~(1 << (15 - 4)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  (1 << (15 - 4)); \
-	} while(0)
-
-#ifndef NAND_NO_RB
-#define NAND_WAIT_READY(nand) \
-	do { \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 13))) == 0) { \
-			WATCHDOG_RESET(); \
-		} \
-	} while (0)
-#else
-#define NAND_WAIT_READY(nand) udelay(12)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
-#define CONFIG_JFFS2_NAND	1			/* jffs2 on nand support */
-#define NAND_CACHE_PAGES	16			/* size of nand cache in 512 bytes pages */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_SIZE		0x00100000
-#define CONFIG_JFFS2_PART_OFFSET	0x00200000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nand0=netta-nand"
-#define MTDPARTS_DEFAULT	"mtdparts=netta-nand:1m@2m(jffs2)"
-*/
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h
index a14b2dd..167285e 100644
--- a/include/configs/NETTA2.h
+++ b/include/configs/NETTA2.h
@@ -498,95 +498,9 @@
 #define DSP_BASE	0xF1000000
 #define NAND_BASE	0xF1010000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PD17, CLE = PE18, CE = PE20, F_RY_BY = PE31 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 20)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 17)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) &= ~(1 << (31 - 18)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat) |=  (1 << (31 - 18)); \
-	} while(0)
-
-#if CONFIG_NETTA2_VERSION == 1
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pedat & (1 << (31 - 31))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#elif CONFIG_NETTA2_VERSION == 2
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & (1 << (15 - 15))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index f97bdcb..b9cf621 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -393,80 +393,6 @@
 
 #endif
 
-/*****************************************************************************/
-
-#define CONFIG_NAND_LEGACY
-
-#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2
-
-/* NAND */
-#define CONFIG_SYS_NAND_BASE			NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
-
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0040; \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0040; \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0100; \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0100; \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) &= ~0x0080; \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) |=  0x0080; \
-	} while(0)
-
-#define NAND_WAIT_READY(nand) \
-	do { \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x100) == 0) \
-			; \
-	} while (0)
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
-#endif
 
 /*****************************************************************************/
 
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 5951d00..99a8c4a 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -75,7 +75,6 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
@@ -84,8 +83,6 @@
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
@@ -251,15 +248,6 @@
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
 /*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
-/*-----------------------------------------------------------------------
   RTC m48t59
 */
 #define CONFIG_RTC_MK48T59
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index a683a8f..66e6d24 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -75,7 +75,6 @@
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
@@ -86,8 +85,6 @@
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
@@ -253,15 +250,6 @@
 #define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
 /*-----------------------------------------------------------------------
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#undef CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
-/*-----------------------------------------------------------------------
   RTC m48t59
 */
 #define CONFIG_RTC_MK48T59
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index e214d70..e15ed4a 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -71,14 +71,10 @@
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_BSP
 
-
-#define CONFIG_NAND_LEGACY
-
 #define	 CONFIG_SYS_HUSH_PARSER
 #define	 CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 /**************************************************************
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index ff73ef9..f9687d2 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -86,12 +86,6 @@
 #define CONFIG_USB_STORAGE
 #endif
 
-#if !defined(CONFIG_BOOT_ROM)
-/* DoC requires legacy NAND for now */
-#define CONFIG_NAND_LEGACY
-#endif
-
-
 /*
  * BOOTP options
  */
@@ -117,10 +111,6 @@
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
-#if !defined(CONFIG_BOOT_ROM)
-#define CONFIG_CMD_DOC
-#endif
-
 #if defined(CONFIG_MPC5200)
 #define CONFIG_CMD_PCI
 #endif
@@ -186,15 +176,6 @@
 #define CONFIG_RTC_PCF8563
 #define CONFIG_SYS_I2C_RTC_ADDR		0x51
 
-/*
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
 #define CONFIG_SYS_DOC_BASE		0xE0000000
 #define CONFIG_SYS_DOC_SIZE		0x00100000
 
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index b58f529..636bd26 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -169,7 +169,6 @@
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_NFS
@@ -179,19 +178,6 @@
 #define CONFIG_CMD_PCI
 #endif
 
-
-#define CONFIG_NAND_LEGACY
-
-/*
- * Disk-On-Chip configuration
- */
-
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 96c86f7..9d620af 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -169,7 +169,6 @@
 #define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_NFS
@@ -179,18 +178,6 @@
 #define CONFIG_CMD_PCI
 #endif
 
-
-/*
- * Disk-On-Chip configuration
- */
-#define CONFIG_NAND_LEGACY
-
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices	*/
-
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 16baf8c..9e54bf8 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -309,32 +309,6 @@
 	} \
 } while(0)
 
-#if 0
-#define SECTORSIZE 512
-#define NAND_NO_RB
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#ifdef NAND_NO_RB
-/* constant delay (see also tR in the datasheet) */
-#define NAND_WAIT_READY(nand) do { \
-	udelay(12); \
-} while (0)
-#else
-/* use the R/B pin */
-/* TBD */
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-#endif
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index f36244d..00ac6cf 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -114,7 +114,6 @@
 #define CONFIG_CMD_CDP
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
@@ -329,14 +328,6 @@
 
 #endif
 
-/************************************************************
- * Disk-On-Chip configuration
- ************************************************************/
-#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT
-#define CONFIG_SYS_DOC_SUPPORT_2000
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
-
 /*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index cac04b4..8ee8cbf 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -163,75 +163,8 @@
 
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_DATE
 
-
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-
-/*
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0x00780000
-#define CONFIG_JFFS2_PART_OFFSET	0x00080000
-*/
-
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_SIZE		0x00200000
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=sixnet-0,nand0=sixnet-nand"
-#define MTDPARTS_DEFAULT	"mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)"
-*/
-
-/* NAND flash support */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_MTD_NAND_ECC_JFFS2
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-/* DFBUSY is available on Port C, bit 12; 0 if busy */
-#define NAND_WAIT_READY(nand)	\
-	while (!(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat & 0x0008));
-#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr))
-#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr))
-#define WRITE_NAND(d, adr)	\
-	 do { (*(volatile uint8_t *)(adr) = (uint8_t)(d)); } while (0)
-#define READ_NAND(adr) (*(volatile uint8_t *)(adr))
-#define	CLE_LO	0x01	/* 0 selects CLE mode (CLE high) */
-#define	ALE_LO	0x02	/* 0 selects ALE mode (ALE high) */
-#define	CE_LO	0x04	/* 1 selects chip (CE low) */
-#define	nand_setcr(cr, val) do {*(volatile uint8_t*)(cr) = (val);} while (0)
-#define NAND_DISABLE_CE(nand) \
-	nand_setcr((nand)->IO_ADDR + 1, ALE_LO | CLE_LO)
-#define NAND_ENABLE_CE(nand) \
-	nand_setcr((nand)->IO_ADDR + 1, CE_LO | ALE_LO | CLE_LO)
-#define NAND_CTL_CLRALE(nandptr) \
-	nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO)
-#define NAND_CTL_SETALE(nandptr) \
-	nand_setcr((nandptr) + 1, CE_LO | CLE_LO)
-#define NAND_CTL_CLRCLE(nandptr) \
-	nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO)
-#define NAND_CTL_SETCLE(nandptr) \
-	nand_setcr((nandptr) + 1, CE_LO | ALE_LO)
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 6f13c63..d44fb07 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -351,8 +351,6 @@
 /* NAND FLASH */
 #ifdef CONFIG_NAND
 
-#undef CONFIG_NAND_LEGACY
-
 #define CONFIG_NAND_FSL_UPM	1
 
 #define	CONFIG_MTD_NAND_ECC_JFFS2	1	/* use JFFS2 ECC	*/
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index de3092d..0480913 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -246,42 +246,4 @@
 
 #define MULTI_PURPOSE_SOCKET_ADDR 0x08000000
 
-/*-----------------------------------------------------------------------
- * NAND flash settings
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#define NAND_WAIT_READY(nand)	NF_WaitRB()
-
-#define NAND_DISABLE_CE(nand)	NF_SetCE(NFCE_HIGH)
-#define NAND_ENABLE_CE(nand)	NF_SetCE(NFCE_LOW)
-
-
-#define WRITE_NAND_COMMAND(d, adr)	NF_Cmd(d)
-#define WRITE_NAND_COMMANDW(d, adr)	NF_CmdW(d)
-#define WRITE_NAND_ADDRESS(d, adr)	NF_Addr(d)
-#define WRITE_NAND(d, adr)		NF_Write(d)
-#define READ_NAND(adr)			NF_Read()
-/* the following functions are NOP's because S3C24X0 handles this in hardware */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-
-#define CONFIG_MTD_NAND_VERIFY_WRITE	1
-#define CONFIG_MTD_NAND_ECC_JFFS2	1
-
-#endif
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 56128c1..2017b66 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -117,38 +117,8 @@
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-
-#define CONFIG_NAND_LEGACY
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
 
 #include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-
-#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
 
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM 0x20000000
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index e1cdc7f..7a57696 100644
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -121,38 +121,6 @@
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_PING
 
-#ifdef	NAND_SUPPORT_HAS_BEEN_FIXED	/* NAND support is broken / unimplemented */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#define AT91_SMART_MEDIA_ALE (1 << 22)	/* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21)	/* our CLE is AD21 */
-
-#include <asm/arch/AT91RM9200.h>	/* needed for port definitions */
-#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
-#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
-
-#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2))
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-
-#endif	/* NAND_SUPPORT_HAS_BEEN_FIXED */
 
 #define CONFIG_NR_DRAM_BANKS 1
 #define PHYS_SDRAM			0x20000000
diff --git a/include/configs/delta.h b/include/configs/delta.h
index e7186e8..9c46c5b 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -220,8 +220,6 @@
 /*
  * NAND Flash
  */
-#undef CONFIG_NAND_LEGACY
-
 #define CONFIG_SYS_NAND0_BASE		0x0 /* 0x43100040 */ /* 0x10000000 */
 #undef CONFIG_SYS_NAND1_BASE
 
@@ -255,13 +253,6 @@
 #define CONFIG_MTD_DEBUG
 #define CONFIG_MTD_DEBUG_VERBOSE 1
 
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
 #define CONFIG_SYS_NO_FLASH		1
 
 #define CONFIG_ENV_IS_IN_NAND	1
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
index 1e7d90e..32a8194 100644
--- a/include/configs/m501sk.h
+++ b/include/configs/m501sk.h
@@ -162,11 +162,6 @@
 #define CONFIG_SYS_PROMPT_HUSH_PS2	    ">>"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	0 /* Max number of NAND devices */
-#define SECTORSIZE			     512
-
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 1803b13..9c18842 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -147,42 +147,6 @@
 #define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_BOOTP_BOOTPATH
 
-
-/*
- *  Board NAND Info.
- */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1	/* Max number of NAND devices */
-#define SECTORSIZE          512
-
-#define ADDR_COLUMN         1
-#define ADDR_PAGE           2
-#define ADDR_COLUMN_PAGE    3
-
-#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS     1
-
-#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
-#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0)
-#define READ_NAND(adr) (*(volatile u16 *)0x6800A084)
-#define NAND_WAIT_READY(nand)  udelay(10)
-
-#define NAND_NO_RB          1
-
-#define CONFIG_SYS_NAND_WP
-#define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
-#define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
-
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-
 #define CONFIG_BOOTDELAY         3
 
 #ifdef NFS_BOOT_DEFAULTS
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index eab9629..f3dc7fe 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -201,29 +201,6 @@
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_NAND_S3C2410
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
-#define SECTORSIZE 512
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS 1
-
-#define NAND_WAIT_READY(nand)	NF_WaitRB()
-#define NAND_DISABLE_CE(nand)	NF_SetCE(NFCE_HIGH)
-#define NAND_ENABLE_CE(nand)	NF_SetCE(NFCE_LOW)
-#define WRITE_NAND_COMMAND(d, adr)	NF_Cmd(d)
-#define WRITE_NAND_COMMANDW(d, adr)	NF_CmdW(d)
-#define WRITE_NAND_ADDRESS(d, adr)	NF_Addr(d)
-#define WRITE_NAND(d, adr)		NF_Write(d)
-#define READ_NAND(adr)			NF_Read()
-/* the following functions are NOP's because S3C24X0 handles this in hardware */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
 #endif	/* CONFIG_CMD_NAND */
 
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
index 147233d..d16262b 100644
--- a/include/configs/stxxtc.h
+++ b/include/configs/stxxtc.h
@@ -118,7 +118,6 @@
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 
@@ -446,90 +445,9 @@
 #define NAND_SIZE	0x00010000	/* 64K */
 #define NAND_BASE	0xF1000000
 
-/****************************************************************/
-
-/* NAND */
-#define CONFIG_NAND_LEGACY
-#define CONFIG_SYS_NAND_BASE		NAND_BASE
-#define CONFIG_MTD_NAND_ECC_JFFS2
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_MTD_NAND_UNSAFE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#undef NAND_NO_RB
-
-#define SECTORSIZE		512
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
-/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
-#define NAND_DISABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
-	} while(0)
-
-#define NAND_ENABLE_CE(nand) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
-	} while(0)
-
-#define NAND_CTL_CLRALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
-	} while(0)
-
-#define NAND_CTL_SETALE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
-	} while(0)
-
-#define NAND_CTL_CLRCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
-	} while(0)
-
-#define NAND_CTL_SETCLE(nandptr) \
-	do { \
-		(((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
-	} while(0)
-
-#ifndef NAND_NO_RB
-#define NAND_WAIT_READY(nand) \
-	do { \
-		int _tries = 0; \
-		while ((((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
-			if (++_tries > 100000) \
-				break; \
-	} while (0)
-#else
-#define NAND_WAIT_READY(nand) udelay(12)
-#endif
-
-#define WRITE_NAND_COMMAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND_ADDRESS(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define WRITE_NAND(d, adr) \
-	do { \
-		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
-	} while(0)
-
-#define READ_NAND(adr) \
-	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
-
 /*****************************************************************************/
 
 #define CONFIG_SYS_DIRECT_FLASH_TFTP
-#define CONFIG_SYS_DIRECT_NAND_TFTP
 
 /*****************************************************************************/
 
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 3917a1b..425f472 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -147,12 +147,8 @@
 
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DOC
 #define CONFIG_CMD_DATE
 
-
-#define CONFIG_NAND_LEGACY
-
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 15c3708..0500042 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -193,7 +193,6 @@
 /*
  * NAND Flash
  */
-#define CONFIG_NEW_NAND_CODE
 #define CONFIG_SYS_NAND0_BASE		0x0
 #undef CONFIG_SYS_NAND1_BASE
 
@@ -227,13 +226,6 @@
 #define CONFIG_MTD_DEBUG
 #define CONFIG_MTD_DEBUG_VERBOSE 1
 
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-
 #define CONFIG_SYS_NO_FLASH		1
 
 #define CONFIG_ENV_IS_IN_NAND	1