tegra: add Colibri T20 board support

This adds board support for the Toradex Colibri T20 module.

Working functions:
- SD card boot
- USB boot
- Network
- NAND environment

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 83 insertions, 0 deletions

diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h
new file mode 100644
index 0000000..0e5f281
--- /dev/null
+++ b/include/configs/colibri_t20_iris.h
@@ -0,0 +1,83 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra20-common.h"
+
+/* Enable FDT support */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-colibri_t20_iris
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT                   "Tegra20 (Colibri) # "
+#define CONFIG_TEGRA_BOARD_STRING  "Toradex Colibri T20 on Iris"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_SDIO1
+#define CONFIG_SYS_NS16550_COM1    NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* File system support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (SZ_2M)
+#undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE                (SZ_64K)
+
+/* Debug commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */