Merge branch 'master' of /home/wd/git/u-boot/master/

39 files changed, 3055 insertions, 129 deletions

diff --git a/include/.gitignore b/include/.gitignore
index d8fda80..ab7d4c7 100644
--- a/include/.gitignore
+++ b/include/.gitignore
@@ -1,3 +1,4 @@
+/autoconf.mk*
 /asm
 /asm-ppc/arch
 /bmp_logo.h
diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h
index 67c8419..4fdb9c6 100644
--- a/include/asm-arm/arch-arm1136/mux.h
+++ b/include/asm-arm/arch-arm1136/mux.h
@@ -28,6 +28,7 @@ typedef  unsigned int uint32;
 void muxSetupSDRC(void);
 void muxSetupGPMC(void);
 void muxSetupUsb0(void);
+void muxSetupUsbHost(void);
 void muxSetupUart3(void);
 void muxSetupI2C1(void);
 void muxSetupUART1(void);
@@ -53,6 +54,10 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE1	((volatile unsigned char *)0x4800008D)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE2	((volatile unsigned char *)0x4800008E)
 #define CONTROL_PADCONF_GPMC_NCS0_BYTE3	((volatile unsigned char *)0x4800008F)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE4	(0x48000090)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE5	(0x48000091)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE6	(0x48000092)
+#define CONTROL_PADCONF_GPMC_NCS0_BYTE7	(0x48000093)
 
 /* Pin Muxing registers used for SDRC */
 #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
@@ -70,6 +75,7 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
 #define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
 #define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
+#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
 
 #define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
 
@@ -151,8 +157,20 @@ void muxSetupHDQ(void);
 #define CONTROL_PADCONF_USB0_SE0		((volatile uint8 *)0x48000122)
 #define CONTROL_PADCONF_USB0_DAT		((volatile uint8 *)0x48000123)
 
+/* Pin Muxing registres used for USB1. */
+#define CONTROL_PADCONF_USB1_RCV	(0x480000EB)
+#define CONTROL_PADCONF_USB1_TXEN	(0x480000EC)
+
 /* Pin Muxing registers used for UART3/IRDA */
 #define CONTROL_PADCONF_UART3_TX_IRTX	((volatile uint8 *)0x48000118)
 #define CONTROL_PADCONF_UART3_RX_IRRX	((volatile uint8 *)0x48000119)
 
+/* Pin Muxing registers used for GPIO */
+#define CONTROL_PADCONF_GPIO69		(0x480000ED)
+#define CONTROL_PADCONF_GPIO70		(0x480000EE)
+#define CONTROL_PADCONF_GPIO102		(0x48000116)
+#define CONTROL_PADCONF_GPIO103		(0x48000117)
+#define CONTROL_PADCONF_GPIO104		(0x48000118)
+#define CONTROL_PADCONF_GPIO105		(0x48000119)
+
 #endif
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index d833035..0c11bec 100644
--- a/include/asm-arm/arch-arm1136/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
@@ -77,6 +77,20 @@
 #define GPMC_CONFIG5_1        (OMAP2420_GPMC_BASE+0xA0)
 #define GPMC_CONFIG6_1        (OMAP2420_GPMC_BASE+0xA4)
 #define GPMC_CONFIG7_1	      (OMAP2420_GPMC_BASE+0xA8)
+#define GPMC_CONFIG1_2        (OMAP2420_GPMC_BASE+0xC0)
+#define GPMC_CONFIG2_2        (OMAP2420_GPMC_BASE+0xC4)
+#define GPMC_CONFIG3_2        (OMAP2420_GPMC_BASE+0xC8)
+#define GPMC_CONFIG4_2        (OMAP2420_GPMC_BASE+0xCC)
+#define GPMC_CONFIG5_2        (OMAP2420_GPMC_BASE+0xD0)
+#define GPMC_CONFIG6_2        (OMAP2420_GPMC_BASE+0xD4)
+#define GPMC_CONFIG7_2        (OMAP2420_GPMC_BASE+0xD8)
+#define GPMC_CONFIG1_3        (OMAP2420_GPMC_BASE+0xF0)
+#define GPMC_CONFIG2_3        (OMAP2420_GPMC_BASE+0xF4)
+#define GPMC_CONFIG3_3        (OMAP2420_GPMC_BASE+0xF8)
+#define GPMC_CONFIG4_3        (OMAP2420_GPMC_BASE+0xFC)
+#define GPMC_CONFIG5_3        (OMAP2420_GPMC_BASE+0x100)
+#define GPMC_CONFIG6_3        (OMAP2420_GPMC_BASE+0x104)
+#define GPMC_CONFIG7_3	      (OMAP2420_GPMC_BASE+0x108)
 
 /* SMS */
 #define OMAP2420_SMS_BASE 0x68008000
@@ -209,13 +223,24 @@
 #define SRAM_OFFSET2          0x0000F800
 #define SRAM_VECT_CODE       (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
 
-#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
-
-#define PERIFERAL_PORT_BASE   0x480FE003
-
 /* FPGA on Debug board.*/
 #define ETH_CONTROL_REG       (H4_CS1_BASE+0x30b)
 #define LAN_RESET_REGISTER    (H4_CS1_BASE+0x1c)
 #endif  /* endif CONFIG_2420H4 */
 
+#if defined(CONFIG_APOLLON)
+#define APOLLON_CS0_BASE	0x00000000	/* OneNAND */
+#define APOLLON_CS1_BASE	0x08000000	/* ethernet */
+#define APOLLON_CS2_BASE	0x10000000	/* OneNAND */
+#define APOLLON_CS3_BASE	0x18000000	/* NOR */
+
+#define ETH_CONTROL_REG		(APOLLON_CS1_BASE + 0x30b)
+#define LAN_RESET_REGISTER	(APOLLON_CS1_BASE + 0x1c)
+#endif	/* endif CONFIG_APOLLON */
+
+/* Common */
+#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
+
+#define PERIFERAL_PORT_BASE   0x480FE003
+
 #endif
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index f6a5b4f..ab19047 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -737,6 +737,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_CB3RUFC              726
 #define MACH_TYPE_MP2USB               727
 #define MACH_TYPE_AT91SAM9261EK        848
+#define MACH_TYPE_OMAP_APOLLON         919
 #define MACH_TYPE_PDNB3               1002
 #define MACH_TYPE_AT91SAM9260EK       1099
 #define MACH_TYPE_AT91RM9200DF        1119
@@ -6826,6 +6827,18 @@ extern unsigned int __machine_arch_type;
 # define machine_is_omap_h4()	(0)
 #endif
 
+#ifdef CONFIG_MACH_OMAP_APOLLON
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_OMAP_APOLLON
+# endif
+# define machine_is_omap_apollon()	(machine_arch_type == MACH_TYPE_OMAP_APOLLON)
+#else
+# define machine_is_omap_apollon()	(0)
+#endif
+
 #ifdef CONFIG_MACH_N10
 # ifdef machine_arch_type
 #  undef machine_arch_type
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 05aee74..91acf9b 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -55,7 +55,7 @@ typedef	struct	global_data {
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
-#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
@@ -63,6 +63,12 @@ typedef	struct	global_data {
 #if defined (CONFIG_MPC834X)
 	u32 usbmph_clk;
 #endif /* CONFIG_MPC834X */
+#if defined(CONFIG_MPC815)
+	u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+	u32 sdhc_clk;
+#endif
 	u32 core_clk;
 	u32 i2c1_clk;
 	u32 i2c2_clk;
@@ -71,6 +77,13 @@ typedef	struct	global_data {
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_MPC837X)
+	u32 pciexp1_clk;
+	u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+	u32 sata_clk;
+#endif
 #if defined(CONFIG_MPC8360)
 	u32  ddr_sec_clk;
 #endif /* CONFIG_MPC8360 */
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index d0c3eba..c3a4a88 100644
--- a/include/asm-ppc/gpio.h
+++ b/include/asm-ppc/gpio.h
@@ -88,6 +88,7 @@ typedef struct {
 void gpio_config(int pin, int in_out, int gpio_alt, int out_val);
 void gpio_write_bit(int pin, int val);
 int gpio_read_out_bit(int pin);
+int gpio_read_in_bit(int pin);
 void gpio_set_chip_configuration(void);
 
 #endif /* __ASM_PPC_GPIO_H */
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 0de9338..34ea295 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
  *
  * MPC83xx Internal Memory Map
  *
@@ -63,7 +63,8 @@ typedef struct sysconf83xx {
 	u8 res6[0x0C];
 	u32 ddrcdr;		/* DDR Control Driver Register */
 	u32 ddrdsr;		/* DDR Debug Status Register */
-	u8 res7[0xD0];
+	u32 obir;		/* Output Buffer Impedance Register */
+	u8 res7[0xCC];
 } sysconf83xx_t;
 
 /*
@@ -553,6 +554,55 @@ typedef struct security83xx {
 	u8 fixme[0x10000];
 } security83xx_t;
 
+/*
+ *  PCI Express
+ */
+typedef struct pex83xx {
+	u8 fixme[0x1000];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+	u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+	u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+	u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+	u8 mem[0x10000];
+} rom83xx_t;
+
+/*
+ * TDM
+ */
+typedef struct tdm83xx {
+	u8 fixme[0x200];
+} tdm83xx_t;
+
+/*
+ * TDM DMAC
+ */
+typedef struct tdmdmac83xx {
+	u8 fixme[0x2000];
+} tdmdmac83xx_t;
+
 #if defined(CONFIG_MPC834X)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
@@ -590,7 +640,7 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
-#elif defined(CONFIG_MPC831X)
+#elif defined(CONFIG_MPC8313)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -625,6 +675,95 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
+#elif defined(CONFIG_MPC8315)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[1];	/* General purpose I/O module */
+	u8			res0[0x1300];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res1[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res2[0x900];
+	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	u8			res3[0x1000];
+	spi83xx_t		spi;		/* Serial Peripheral Interface */
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
+	u8			res4[0x80];
+	ios83xx_t		ios;		/* Sequencer */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8			res5[0xa00];
+	pex83xx_t		pciexp[2];	/* PCI Express Controller */
+	u8			res6[0xb000];
+	tdm83xx_t		tdm;		/* TDM Controller */
+	u8			res7[0x1e00];
+	sata83xx_t		sata[2];	/* SATA Controller */
+	u8			res8[0x9000];
+	usb83xx_t		usb[1];		/* USB DR Controller */
+	tsec83xx_t		tsec[2];
+	u8			res9[0x6000];
+	tdmdmac83xx_t		tdmdmac;	/* TDM DMAC */
+	u8			res10[0x2000];
+	security83xx_t		security;
+	u8			res11[0xA3000];
+	serdes83xx_t		serdes[1];	/* SerDes Registers */
+	u8			res12[0x1CF00];
+} immap_t;
+
+#elif defined(CONFIG_MPC837X)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[2];	/* General purpose I/O module */
+	u8			res0[0x1200];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res1[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res2[0x900];
+	lbus83xx_t		lbus;		/* Local Bus Controller Registers */
+	u8			res3[0x1000];
+	spi83xx_t		spi;		/* Serial Peripheral Interface */
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Software Configuration Registers */
+	u8			res4[0x80];
+	ios83xx_t		ios;		/* Sequencer */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Controller Control and Status Registers */
+	u8			res5[0xa00];
+	pex83xx_t		pciexp[2];	/* PCI Express Controller */
+	u8			res6[0xd000];
+	sata83xx_t		sata[4];	/* SATA Controller */
+	u8			res7[0x7000];
+	usb83xx_t		usb[1];		/* USB DR Controller */
+	tsec83xx_t		tsec[2];
+	u8			res8[0x8000];
+	sdhc83xx_t		sdhc;		/* SDHC Controller */
+	u8			res9[0x1000];
+	security83xx_t		security;
+	u8			res10[0xA3000];
+	serdes83xx_t		serdes[2];	/* SerDes Registers */
+	u8			res11[0xCE00];
+	rom83xx_t		rom;		/* On Chip ROM */
+} immap_t;
+
 #elif defined(CONFIG_MPC8360)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
diff --git a/include/asm-ppc/ppc4xx-intvec.h b/include/asm-ppc/ppc4xx-intvec.h
new file mode 100644
index 0000000..8d04b69
--- /dev/null
+++ b/include/asm-ppc/ppc4xx-intvec.h
@@ -0,0 +1,403 @@
+/*
+*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+/*
+ * Interrupt vector number definitions to ease the
+ * 405 -- 440 porting pain ;-)
+ *
+ * NOTE: They're not all here yet ... update as needed.
+ *
+ */
+
+#ifndef _VECNUMS_H_
+#define _VECNUMS_H_
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* UIC 0 */
+#define VECNUM_U0                   0  /* UART 0                        */
+#define VECNUM_U1                   1  /* UART 1                        */
+#define VECNUM_IIC0                 2  /* IIC                           */
+#define VECNUM_KRD                  3  /* Kasumi Ready for data         */
+#define VECNUM_KDA                  4  /* Kasumi Data Available         */
+#define VECNUM_PCRW                 5  /* PCI command register write    */
+#define VECNUM_PPM                  6  /* PCI power management          */
+#define VECNUM_IIC1                 7  /* IIC                           */
+#define VECNUM_SPI                  8  /* SPI                           */
+#define VECNUM_EPCISER              9  /* External PCI SERR             */
+#define VECNUM_MTE                 10  /* MAL TXEOB                     */
+#define VECNUM_MRE                 11  /* MAL RXEOB                     */
+#define VECNUM_D0                  12  /* DMA channel 0                 */
+#define VECNUM_D1                  13  /* DMA channel 1                 */
+#define VECNUM_D2                  14  /* DMA channel 2                 */
+#define VECNUM_D3                  15  /* DMA channel 3                 */
+#define VECNUM_UD0                 16  /* UDMA irq 0                    */
+#define VECNUM_UD1                 17  /* UDMA irq 1                    */
+#define VECNUM_UD2                 18  /* UDMA irq 2                    */
+#define VECNUM_UD3                 19  /* UDMA irq 3                    */
+#define VECNUM_HSB2D               20  /* USB2.0 Device                 */
+#define VECNUM_USBDEV		   20  /* USB 1.1/USB 2.0 Device        */
+#define VECNUM_OHCI1               21  /* USB2.0 Host OHCI irq 1        */
+#define VECNUM_OHCI2               22  /* USB2.0 Host OHCI irq 2        */
+#define VECNUM_EIP94               23  /* Security EIP94                */
+#define VECNUM_ETH0                24  /* Emac 0                        */
+#define VECNUM_ETH1                25  /* Emac 1                        */
+#define VECNUM_EHCI                26  /* USB2.0 Host EHCI              */
+#define VECNUM_EIR4                27  /* External interrupt 4          */
+#define VECNUM_UIC2NC              28  /* UIC2 non-critical interrupt   */
+#define VECNUM_UIC2C               29  /* UIC2 critical interrupt       */
+#define VECNUM_UIC1NC              30  /* UIC1 non-critical interrupt   */
+#define VECNUM_UIC1C               31  /* UIC1 critical interrupt       */
+
+/* UIC 1 */
+#define VECNUM_MS           (32 +  0)  /* MAL SERR                      */
+#define VECNUM_MTDE         (32 +  1)  /* MAL TXDE                      */
+#define VECNUM_MRDE         (32 +  2)  /* MAL RXDE                      */
+#define VECNUM_U2           (32 +  3)  /* UART 2                        */
+#define VECNUM_U3           (32 +  4)  /* UART 3                        */
+#define VECNUM_EBCO         (32 +  5)  /* EBCO interrupt status         */
+#define VECNUM_NDFC         (32 +  6)  /* NDFC                          */
+#define VECNUM_KSLE         (32 +  7)  /* KASUMI slave error            */
+#define VECNUM_CT5          (32 +  8)  /* GPT compare timer 5           */
+#define VECNUM_CT6          (32 +  9)  /* GPT compare timer 6           */
+#define VECNUM_PLB34I0      (32 + 10)  /* PLB3X4X MIRQ0                 */
+#define VECNUM_PLB34I1      (32 + 11)  /* PLB3X4X MIRQ1                 */
+#define VECNUM_PLB34I2      (32 + 12)  /* PLB3X4X MIRQ2                 */
+#define VECNUM_PLB34I3      (32 + 13)  /* PLB3X4X MIRQ3                 */
+#define VECNUM_PLB34I4      (32 + 14)  /* PLB3X4X MIRQ4                 */
+#define VECNUM_PLB34I5      (32 + 15)  /* PLB3X4X MIRQ5                 */
+#define VECNUM_CT0          (32 + 16)  /* GPT compare timer 0           */
+#define VECNUM_CT1          (32 + 17)  /* GPT compare timer 1           */
+#define VECNUM_EIR7         (32 + 18)  /* External interrupt 7          */
+#define VECNUM_EIR8         (32 + 19)  /* External interrupt 8          */
+#define VECNUM_EIR9         (32 + 20)  /* External interrupt 9          */
+#define VECNUM_CT2          (32 + 21)  /* GPT compare timer 2           */
+#define VECNUM_CT3          (32 + 22)  /* GPT compare timer 3           */
+#define VECNUM_CT4          (32 + 23)  /* GPT compare timer 4           */
+#define VECNUM_SRE          (32 + 24)  /* Serial ROM error              */
+#define VECNUM_GPTDC        (32 + 25)  /* GPT decrementer pulse         */
+#define VECNUM_RSVD0        (32 + 26)  /* Reserved                      */
+#define VECNUM_EPCIPER      (32 + 27)  /* External PCI PERR             */
+#define VECNUM_EIR0         (32 + 28)  /* External interrupt 0          */
+#define VECNUM_EWU0         (32 + 29)  /* Ethernet 0 wakeup             */
+#define VECNUM_EIR1         (32 + 30)  /* External interrupt 1          */
+#define VECNUM_EWU1         (32 + 31)  /* Ethernet 1 wakeup             */
+
+#define VECNUM_TXDE         VECNUM_MTDE
+#define VECNUM_RXDE         VECNUM_MRDE
+
+/* UIC 2 */
+#define VECNUM_EIR5         (64 +  0)  /* External interrupt 5          */
+#define VECNUM_EIR6         (64 +  1)  /* External interrupt 6          */
+#define VECNUM_OPB          (64 +  2)  /* OPB to PLB bridge int stat    */
+#define VECNUM_EIR2         (64 +  3)  /* External interrupt 2          */
+#define VECNUM_EIR3         (64 +  4)  /* External interrupt 3          */
+#define VECNUM_DDR2         (64 +  5)  /* DDR2 sdram                    */
+#define VECNUM_MCTX0        (64 +  6)  /* MAl intp coalescence TX0      */
+#define VECNUM_MCTX1        (64 +  7)  /* MAl intp coalescence TX1      */
+#define VECNUM_MCTR0        (64 +  8)  /* MAl intp coalescence TR0      */
+#define VECNUM_MCTR1        (64 +  9)  /* MAl intp coalescence TR1      */
+
+#elif defined(CONFIG_440SPE)
+
+/* UIC 0 */
+#define VECNUM_U0           0           /* UART0                        */
+#define VECNUM_U1           1           /* UART1                        */
+#define VECNUM_IIC0         2           /* IIC0                         */
+#define VECNUM_IIC1         3           /* IIC1                         */
+#define VECNUM_PIM          4           /* PCI inbound message          */
+#define VECNUM_PCRW         5           /* PCI command reg write        */
+#define VECNUM_PPM          6           /* PCI power management         */
+#define VECNUM_MSI0         7           /* PCI MSI level 0              */
+#define VECNUM_MSI1         8           /* PCI MSI level 0              */
+#define VECNUM_MSI2         9           /* PCI MSI level 0              */
+#define VECNUM_D0           12          /* DMA channel 0                */
+#define VECNUM_D1           13          /* DMA channel 1                */
+#define VECNUM_D2           14          /* DMA channel 2                */
+#define VECNUM_D3           15          /* DMA channel 3                */
+#define VECNUM_UIC1NC       30          /* UIC1 non-critical interrupt  */
+#define VECNUM_UIC1C        31          /* UIC1 critical interrupt      */
+
+/* UIC 1 */
+#define VECNUM_MS           (32 + 1 )   /* MAL SERR                     */
+#define VECNUM_TXDE         (32 + 2 )   /* MAL TXDE                     */
+#define VECNUM_RXDE         (32 + 3 )   /* MAL RXDE                     */
+#define VECNUM_MTE          (32 + 6 )   /* MAL Tx EOB                   */
+#define VECNUM_MRE          (32 + 7 )   /* MAL Rx EOB                   */
+#define VECNUM_CT0          (32 + 12 )  /* GPT compare timer 0          */
+#define VECNUM_CT1          (32 + 13 )  /* GPT compare timer 1          */
+#define VECNUM_CT2          (32 + 14 )  /* GPT compare timer 2          */
+#define VECNUM_CT3          (32 + 15 )  /* GPT compare timer 3          */
+#define VECNUM_CT4          (32 + 16 )  /* GPT compare timer 4          */
+#define VECNUM_ETH0         (32 + 28)   /* Ethernet interrupt status    */
+#define VECNUM_EWU0         (32 + 29)   /* Emac  wakeup                 */
+
+/* UIC 2 */
+#define VECNUM_EIR5         (64 + 24)   /* External interrupt 5         */
+#define VECNUM_EIR4         (64 + 25)   /* External interrupt 4         */
+#define VECNUM_EIR3         (64 + 26)   /* External interrupt 3         */
+#define VECNUM_EIR2         (64 + 27)   /* External interrupt 2         */
+#define VECNUM_EIR1         (64 + 28)   /* External interrupt 1         */
+#define VECNUM_EIR0         (64 + 29)   /* External interrupt 0         */
+
+#elif defined(CONFIG_440SP)
+
+/* UIC 0 */
+#define VECNUM_U0           0           /* UART0                        */
+#define VECNUM_U1           1           /* UART1                        */
+#define VECNUM_IIC0         2           /* IIC0                         */
+#define VECNUM_IIC1         3           /* IIC1                         */
+#define VECNUM_PIM          4           /* PCI inbound message          */
+#define VECNUM_PCRW         5           /* PCI command reg write        */
+#define VECNUM_PPM          6           /* PCI power management         */
+#define VECNUM_UIC1NC       30          /* UIC1 non-critical interrupt  */
+#define VECNUM_UIC1C        31          /* UIC1 critical interrupt      */
+
+/* UIC 1 */
+#define VECNUM_EIR0         (32 + 0)	/* External interrupt 0         */
+#define VECNUM_MS           (32 + 1)	/* MAL SERR                     */
+#define VECNUM_TXDE         (32 + 2)	/* MAL TXDE                     */
+#define VECNUM_RXDE         (32 + 3)	/* MAL RXDE                     */
+#define VECNUM_MTE          (32 + 6)	/* MAL Tx EOB                   */
+#define VECNUM_MRE          (32 + 7)	/* MAL Rx EOB                   */
+#define VECNUM_CT0          (32 + 12)	/* GPT compare timer 0          */
+#define VECNUM_CT1          (32 + 13)	/* GPT compare timer 1          */
+#define VECNUM_CT2          (32 + 14)	/* GPT compare timer 2          */
+#define VECNUM_CT3          (32 + 15)	/* GPT compare timer 3          */
+#define VECNUM_CT4          (32 + 16)	/* GPT compare timer 4          */
+#define VECNUM_ETH0         (32 + 28)	/* Ethernet interrupt status    */
+#define VECNUM_EWU0         (32 + 29)	/* Emac  wakeup                 */
+
+#elif defined(CONFIG_440)
+
+/* UIC 0 */
+#define VECNUM_U0           0           /* UART0                        */
+#define VECNUM_U1           1           /* UART1                        */
+#define VECNUM_IIC0         2           /* IIC0                         */
+#define VECNUM_IIC1         3           /* IIC1                         */
+#define VECNUM_PIM          4           /* PCI inbound message          */
+#define VECNUM_PCRW         5           /* PCI command reg write        */
+#define VECNUM_PPM          6           /* PCI power management         */
+#define VECNUM_MSI0         7           /* PCI MSI level 0              */
+#define VECNUM_MSI1         8           /* PCI MSI level 0              */
+#define VECNUM_MSI2         9           /* PCI MSI level 0              */
+#define VECNUM_MTE          10          /* MAL TXEOB                    */
+#define VECNUM_MRE          11          /* MAL RXEOB                    */
+#define VECNUM_D0           12          /* DMA channel 0                */
+#define VECNUM_D1           13          /* DMA channel 1                */
+#define VECNUM_D2           14          /* DMA channel 2                */
+#define VECNUM_D3           15          /* DMA channel 3                */
+#define VECNUM_CT0          18          /* GPT compare timer 0          */
+#define VECNUM_CT1          19          /* GPT compare timer 1          */
+#define VECNUM_CT2          20          /* GPT compare timer 2          */
+#define VECNUM_CT3          21          /* GPT compare timer 3          */
+#define VECNUM_CT4          22          /* GPT compare timer 4          */
+#define VECNUM_EIR0         23          /* External interrupt 0         */
+#define VECNUM_EIR1         24          /* External interrupt 1         */
+#define VECNUM_EIR2         25          /* External interrupt 2         */
+#define VECNUM_EIR3         26          /* External interrupt 3         */
+#define VECNUM_EIR4         27          /* External interrupt 4         */
+#define VECNUM_EIR5         28          /* External interrupt 5         */
+#define VECNUM_EIR6         29          /* External interrupt 6         */
+#define VECNUM_UIC1NC       30          /* UIC1 non-critical interrupt  */
+#define VECNUM_UIC1C        31          /* UIC1 critical interrupt      */
+
+/* UIC 1 */
+#define VECNUM_MS           (32 + 0 )   /* MAL SERR                     */
+#define VECNUM_TXDE         (32 + 1 )   /* MAL TXDE                     */
+#define VECNUM_RXDE         (32 + 2 )   /* MAL RXDE                     */
+#define VECNUM_USBDEV	    (32 + 23)   /* USB 1.1/USB 2.0 Device       */
+#define VECNUM_ETH0         (32 + 28)   /* Ethernet 0 interrupt status  */
+#define VECNUM_EWU0         (32 + 29)   /* Ethernet 0 wakeup            */
+
+#else /* !defined(CONFIG_440) */
+
+#if defined(CONFIG_405EZ)
+#define VECNUM_D0		0	/* DMA channel 0		*/
+#define VECNUM_D1		1	/* DMA channel 1		*/
+#define VECNUM_D2		2	/* DMA channel 2		*/
+#define VECNUM_D3		3	/* DMA channel 3		*/
+#define VECNUM_1588		4	/* IEEE 1588 network synchronization */
+#define VECNUM_U0		5	/* UART0			*/
+#define VECNUM_U1		6	/* UART1			*/
+#define VECNUM_CAN0		7	/* CAN 0			*/
+#define VECNUM_CAN1		8	/* CAN 1			*/
+#define VECNUM_SPI		9	/* SPI				*/
+#define VECNUM_IIC0		10	/* I2C				*/
+#define VECNUM_CHT0		11	/* Chameleon timer high pri interrupt */
+#define VECNUM_CHT1		12	/* Chameleon timer high pri interrupt */
+#define VECNUM_USBH1		13	/* USB Host 1			*/
+#define VECNUM_USBH2		14	/* USB Host 2			*/
+#define VECNUM_USBDEV		15	/* USB Device			*/
+#define VECNUM_ETH0		16	/* 10/100 Ethernet interrupt status */
+#define VECNUM_EWU0		17	/* Ethernet wakeup sequence detected */
+
+#define VECNUM_MADMAL		18	/* Logical OR of following MadMAL int */
+#define VECNUM_MS		18	/*	MAL_SERR_INT 		*/
+#define VECNUM_TXDE		18	/* 	MAL_TXDE_INT 		*/
+#define VECNUM_RXDE		18	/*	MAL_RXDE_INT 		*/
+
+#define VECNUM_MTE		19	/* MAL TXEOB			*/
+#define VECNUM_MTE1		20	/* MAL TXEOB1			*/
+#define VECNUM_MRE		21	/* MAL RXEOB			*/
+#define VECNUM_NAND		22	/* NAND Flash controller	*/
+#define VECNUM_ADC		23	/* ADC				*/
+#define VECNUM_DAC		24	/* DAC				*/
+#define VECNUM_OPB2PLB		25	/* OPB to PLB bridge interrupt	*/
+#define VECNUM_RESERVED0	26	/* Reserved			*/
+#define VECNUM_EIR0		27	/* External interrupt 0		*/
+#define VECNUM_EIR1		28	/* External interrupt 1		*/
+#define VECNUM_EIR2		29	/* External interrupt 2		*/
+#define VECNUM_EIR3		30	/* External interrupt 3		*/
+#define VECNUM_EIR4		31	/* External interrupt 4		*/
+
+#elif defined(CONFIG_405EX)
+
+/* UIC 0 */
+#define VECNUM_U0		00
+#define VECNUM_U1		01
+#define VECNUM_IIC0		02
+#define VECNUM_PKA		03
+#define VECNUM_TRNG		04
+#define VECNUM_EBM		05
+#define VECNUM_BGI		06
+#define VECNUM_IIC1		07
+#define VECNUM_SPI		08
+#define VECNUM_EIR0		09
+#define VECNUM_MTE		10	/* MAL Tx EOB */
+#define VECNUM_MRE		11	/* MAL Rx EOB */
+#define VECNUM_DMA0		12
+#define VECNUM_DMA1		13
+#define VECNUM_DMA2		14
+#define VECNUM_DMA3		15
+#define VECNUM_PCIE0AL		16
+#define VECNUM_PCIE0VPD		17
+#define VECNUM_RPCIE0HRST	18
+#define VECNUM_FPCIE0HRST	19
+#define VECNUM_PCIE0TCR		20
+#define VECNUM_PCIEMSI0		21
+#define VECNUM_PCIEMSI1		22
+#define VECNUM_SECURITY		23
+#define VECNUM_ETH0		24
+#define VECNUM_ETH1		25
+#define VECNUM_PCIEMSI2		26
+#define VECNUM_EIR4		27
+#define VECNUM_UIC2NC		28
+#define VECNUM_UIC2C		29
+#define VECNUM_UIC1NC		30
+#define VECNUM_UIC1C		31
+
+/* UIC 1 */
+#define VECNUM_MS		(32 + 00)	/* MAL SERR */
+#define VECNUM_TXDE		(32 + 01)	/* MAL TXDE */
+#define VECNUM_RXDE		(32 + 02)	/* MAL RXDE */
+#define VECNUM_PCIE0BMVC0	(32 + 03)
+#define VECNUM_PCIE0DCRERR	(32 + 04)
+#define VECNUM_EBC		(32 + 05)
+#define VECNUM_NDFC		(32 + 06)
+#define VECNUM_PCEI1DCRERR	(32 + 07)
+#define VECNUM_CT8		(32 + 08)
+#define VECNUM_CT9		(32 + 09)
+#define VECNUM_PCIE1AL		(32 + 10)
+#define VECNUM_PCIE1VPD		(32 + 11)
+#define VECNUM_RPCE1HRST	(32 + 12)
+#define VECNUM_FPCE1HRST	(32 + 13)
+#define VECNUM_PCIE1TCR		(32 + 14)
+#define VECNUM_PCIE1VC0		(32 + 15)
+#define VECNUM_CT3		(32 + 16)
+#define VECNUM_CT4		(32 + 17)
+#define VECNUM_EIR7		(32 + 18)
+#define VECNUM_EIR8		(32 + 19)
+#define VECNUM_EIR9		(32 + 20)
+#define VECNUM_CT5		(32 + 21)
+#define VECNUM_CT6		(32 + 22)
+#define VECNUM_CT7		(32 + 23)
+#define VECNUM_SROM		(32 + 24)	/* SERIAL ROM */
+#define VECNUM_GPTDECPULS	(32 + 25)	/* GPT Decrement pulse */
+#define VECNUM_EIR2		(32 + 26)
+#define VECNUM_EIR5		(32 + 27)
+#define VECNUM_EIR6		(32 + 28)
+#define VECNUM_EMAC0WAKE	(32 + 29)
+#define VECNUM_EIR1		(32 + 30)
+#define VECNUM_EMAC1WAKE	(32 + 31)
+
+/* UIC 2 */
+#define VECNUM_PCIE0INTA	(64 + 00)	/* PCIE0 INTA */
+#define VECNUM_PCIE0INTB	(64 + 01)	/* PCIE0 INTB */
+#define VECNUM_PCIE0INTC	(64 + 02)	/* PCIE0 INTC */
+#define VECNUM_PCIE0INTD	(64 + 03)	/* PCIE0 INTD */
+#define VECNUM_EIR3		(64 + 04)	/* External IRQ 3 */
+#define VECNUM_DDRMCUE		(64 + 05)
+#define VECNUM_DDRMCCE		(64 + 06)
+#define VECNUM_MALINTCOATX0	(64 + 07)	/* Interrupt coalecence TX0 */
+#define VECNUM_MALINTCOATX1	(64 + 08)	/* Interrupt coalecence TX1 */
+#define VECNUM_MALINTCOARX0	(64 + 09)	/* Interrupt coalecence RX0 */
+#define VECNUM_MALINTCOARX1	(64 + 10)	/* Interrupt coalecence RX1 */
+#define VECNUM_PCIE1INTA	(64 + 11)	/* PCIE0 INTA */
+#define VECNUM_PCIE1INTB	(64 + 12)	/* PCIE0 INTB */
+#define VECNUM_PCIE1INTC	(64 + 13)	/* PCIE0 INTC */
+#define VECNUM_PCIE1INTD	(64 + 14)	/* PCIE0 INTD */
+#define VECNUM_RPCIEMSI2	(64 + 15)	/* MSI level 2 */
+#define VECNUM_PCIEMSI3		(64 + 16)	/* MSI level 2 */
+#define VECNUM_PCIEMSI4		(64 + 17)	/* MSI level 2 */
+#define VECNUM_PCIEMSI5		(64 + 18)	/* MSI level 2 */
+#define VECNUM_PCIEMSI6		(64 + 19)	/* MSI level 2 */
+#define VECNUM_PCIEMSI7		(64 + 20)	/* MSI level 2 */
+#define VECNUM_PCIEMSI8		(64 + 21)	/* MSI level 2 */
+#define VECNUM_PCIEMSI9		(64 + 22)	/* MSI level 2 */
+#define VECNUM_PCIEMSI10	(64 + 23)	/* MSI level 2 */
+#define VECNUM_PCIEMSI11	(64 + 24)	/* MSI level 2 */
+#define VECNUM_PCIEMSI12	(64 + 25)	/* MSI level 2 */
+#define VECNUM_PCIEMSI13	(64 + 26)	/* MSI level 2 */
+#define VECNUM_PCIEMSI14	(64 + 27)	/* MSI level 2 */
+#define VECNUM_PCIEMSI15	(64 + 28)	/* MSI level 2 */
+#define VECNUM_PLB4XAHB		(64 + 29)	/* PLBxAHB bridge */
+#define VECNUM_USBWAKE		(64 + 30)	/* USB wakup */
+#define VECNUM_USBOTG		(64 + 31)	/* USB OTG */
+
+#else	/* !CONFIG_405EZ */
+
+#define VECNUM_U0           0           /* UART0                        */
+#define VECNUM_U1           1           /* UART1                        */
+#define VECNUM_D0           5           /* DMA channel 0                */
+#define VECNUM_D1           6           /* DMA channel 1                */
+#define VECNUM_D2           7           /* DMA channel 2                */
+#define VECNUM_D3           8           /* DMA channel 3                */
+#define VECNUM_EWU0         9           /* Ethernet wakeup              */
+#define VECNUM_MS           10          /* MAL SERR                     */
+#define VECNUM_MTE          11          /* MAL TXEOB                    */
+#define VECNUM_MRE          12          /* MAL RXEOB                    */
+#define VECNUM_TXDE         13          /* MAL TXDE                     */
+#define VECNUM_RXDE         14          /* MAL RXDE                     */
+#define VECNUM_ETH0         15          /* Ethernet interrupt status    */
+#define VECNUM_EIR0         25          /* External interrupt 0         */
+#define VECNUM_EIR1         26          /* External interrupt 1         */
+#define VECNUM_EIR2         27          /* External interrupt 2         */
+#define VECNUM_EIR3         28          /* External interrupt 3         */
+#define VECNUM_EIR4         29          /* External interrupt 4         */
+#define VECNUM_EIR5         30          /* External interrupt 5         */
+#define VECNUM_EIR6         31          /* External interrupt 6         */
+#endif	/* defined(CONFIG_405EZ) */
+
+#endif /* defined(CONFIG_440) */
+
+#endif /* _VECNUMS_H_ */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index f58b38a..9fbbdf8 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -884,6 +884,7 @@
 #define SVR_8544_E	0x803C
 #define SVR_8548	0x8031
 #define SVR_8548_E	0x8039
+#define SVR_8610	0x80A0
 #define SVR_8641	0x8090
 #define SVR_8568_E	0x807D
 
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index d7ef65d..f3965ef 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -73,6 +73,7 @@
 #define CONFIG_CMD_SETGETDCR	/* DCR support on 4xx		*/
 #define CONFIG_CMD_SNTP		/* SNTP support			*/
 #define CONFIG_CMD_SPI		/* SPI utility			*/
+#define CONFIG_CMD_TERMINAL	/* built-in Serial Terminal	*/
 #define CONFIG_CMD_UNIVERSE	/* Tundra Universe Support	*/
 #define CONFIG_CMD_USB		/* USB Support			*/
 #define CONFIG_CMD_VFD		/* VFD support (TRAB)		*/
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index bfbf3a8..3eb3131 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -273,7 +273,9 @@
  * Virtex2 FPGA configuration support
  */
 #define CONFIG_FPGA_COUNT		1
-#define CONFIG_FPGA				CFG_XILINX_VIRTEX2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_VIRTEX2
 #define CFG_FPGA_PROG_FEEDBACK
 
 
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index db30958..35637f9 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -192,7 +192,9 @@
 
 /* FPGA - Spartan 2 */
 /* experiment
-#define CONFIG_FPGA		CFG_SPARTAN3
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_FPGA_COUNT	1
 #define CFG_FPGA_PROG_FEEDBACK
 #define CFG_FPGA_CHECK_CTRLC
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 6568fe1..c9a9c83 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -178,6 +178,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
 
@@ -230,11 +231,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8313@0"
-#define OF_SOC			"soc8313@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8313@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * Serial Port
@@ -326,7 +323,7 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 	#define CFG_ENV_SECT_SIZE	0x10000	/* 64K(one sector) for env */
 	#define CFG_ENV_SIZE		0x2000
 
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 376973b..564de02 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -116,6 +116,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -269,12 +270,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -354,8 +350,8 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index c9c6d88..a48b311 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -145,6 +145,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
@@ -320,12 +321,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8323@0"
-#define OF_SOC			"soc8323@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -410,8 +406,8 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 92555ba..03409bb 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -341,11 +341,7 @@
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -456,7 +452,7 @@
  */
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 	#define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
 	#define CFG_ENV_SIZE		0x2000
 
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 54cab52..49dc0de 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -261,6 +261,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
@@ -297,12 +298,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /*
  * PCI
@@ -404,8 +401,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifndef CFG_RAMBOOT
   #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
   #define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) for environment */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE))
   #define CFG_ENV_SIZE		0x2000
 #else
   #define CFG_NO_FLASH		/* Flash is not usable now */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 41f062c..fedb8a9 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -170,6 +170,7 @@
 #undef	CFG_RAMBOOT
 #endif
 
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
@@ -346,16 +347,8 @@
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
-#undef  CONFIG_OF_FLAT_TREE
 #define CONFIG_OF_BOARD_SETUP	1
-#define CONFIG_OF_HAS_BD_T	1
-#define CONFIG_OF_HAS_UBOOT_ENV	1
-
-#define OF_CPU			"PowerPC,8360@0"
-#define OF_SOC			"soc8360@e0000000"
-#define OF_QE			"qe@e0100000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8360@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
@@ -443,8 +436,8 @@
 
 #ifndef CFG_RAMBOOT
 	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-	#define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000
 	#define CFG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
new file mode 100644
index 0000000..0958e6b
--- /dev/null
+++ b/include/configs/MPC837XEMDS.h
@@ -0,0 +1,600 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC837X		1 /* MPC837X CPU specific */
+#define CONFIG_MPC837XEMDS	1 /* MPC837XEMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66MHz, then
+ * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_SVCOD_DIV_2 |\
+	HRCWL_CSB_TO_CLKIN_6X1 |\
+	HRCWL_CORE_TO_CSB_1_5X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LDP_CLEAR)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LDP_CLEAR)
+#endif
+
+/*
+ * eTSEC Clock Config
+ */
+#define CFG_SCCR_TSEC1CM	1	/* CSB:eTSEC1 = 1:1 */
+#define CFG_SCCR_TSEC2CM	1	/* CSB:eTSEC2 = 1:1 */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x00000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CFG_OBIR		0x31100000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_83XX_DDR_USES_CS0
+#define CFG_DDRCDR_VALUE	0x80080001 /* ODT 150ohm on SoC */
+
+#undef CONFIG_DDR_ECC		/* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
+
+#if defined(CONFIG_SPD_EEPROM)
+#define SPD_EEPROM_ADDRESS	0x51 /* I2C address of DDR SODIMM SPD */
+#else
+/*
+ * Manually set up DDR parameters
+ * WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM
+ * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
+ */
+#define CFG_DDR_SIZE		512 /* MB */
+#define CFG_DDR_CS0_BNDS	0x0000001f
+#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+				| 0x00010000  /* ODT_WR to CSn */ \
+				| CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
+				/* 0x80010202 */
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+				| ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+				/* 0x00620802 */
+#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+				| (13 << TIMING_CFG1_REFREC_SHIFT ) \
+				| ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+				/* 0x3935d322 */
+#define CFG_DDR_TIMING_2	( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+				| ( 6 << TIMING_CFG2_CPO_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+				| ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+				| ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x231088c8 */
+#define CFG_DDR_INTERVAL	( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+				/* 0x03E00100 */
+#define CFG_DDR_SDRAM_CFG	0x43000000
+#define CFG_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
+#define CFG_DDR_MODE		( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \
+				| ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
+				/* ODT 150ohm CL=3, AL=2 on SDRAM */
+#define CFG_DDR_MODE2		0x00000000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00040000 /* memtest region */
+#define CFG_MEMTEST_END		0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | /* Flash Base address */ \
+				(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+				BR_V) /* valid */
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CFG_BR3_PRELIM		( CFG_NAND_BASE \
+				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
+				| BR_PS_8		/* Port Size = 8 bit */ \
+				| BR_MS_FCM		/* MSEL = FCM */ \
+				| BR_V )		/* valid */
+#define CFG_OR3_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR )
+				/* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR3_PRELIM	CFG_NAND_BASE
+#define CFG_LBLAWAR3_PRELIM	0x8000000E	/* 32KB  */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+#ifdef CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
+#define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+#endif /* CONFIG_PCI */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET	0x24000
+#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET	0x25000
+#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII		1 /* MII PHY management */
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_SDRAM_LOWER		CFG_SDRAM_BASE
+#define CFG_SDRAM_UPPER		(CFG_SDRAM_BASE + 0x10000000)
+
+#define CFG_IBAT0L	(CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+#define CFG_IBAT1L	(CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR		00:E0:0C:00:83:79
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:83:78
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"							\
+   "consoledev=ttyS0\0"							\
+   "ramdiskaddr=1000000\0"						\
+   "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc837xemds.dtb\0"						\
+   ""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
new file mode 100644
index 0000000..55df5aa
--- /dev/null
+++ b/include/configs/MPC8610HPCD.h
@@ -0,0 +1,692 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * MPC8610HPCD board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_MPC86xx		1	/* MPC86xx */
+#define CONFIG_MPC8610		1	/* MPC8610 specific */
+#define CONFIG_MPC8610HPCD	1	/* MPC8610HPCD board specific */
+#define CONFIG_NUM_CPUS		1	/* Number of CPUs in the system */
+#define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
+
+#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#endif
+
+#ifdef RUN_DIAG
+#define CFG_DIAG_ADDR		0xff800000
+#endif
+
+#define CFG_RESET_ADDRESS	0xfff00100
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE*/
+#define CONFIG_PCI1		1	/* PCI controler 1 */
+#define CONFIG_PCIE1		1	/* PCIe 1 connected to ULI bridge */
+#define CONFIG_PCIE2		1	/* PCIe 2 connected to slot */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM		/* Use SPD for DDR */
+#undef CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+#define CONFIG_ALTIVEC		1
+
+/*
+ * L2CR setup -- make sure this is right for your board!
+ */
+#define CFG_L2
+#define L2_INIT		0
+#define L2_ENABLE	(L2CR_L2E |0x00100000 )
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+#define CONFIG_MISC_INIT_R		1
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
+#define CFG_MEMTEST_END		0x00400000
+#define CFG_ALT_MEMTEST
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR		(CFG_CCSRBAR+0x8000)
+#define CFG_PCIE1_ADDR		(CFG_CCSRBAR+0xa000)
+#define CFG_PCIE2_ADDR		(CFG_CCSRBAR+0x9000)
+
+#define CFG_DIU_ADDR		(CFG_CCSRBAR+0x2c000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define MPC86xx_DDR_SDRAM_CLK_CNTL
+
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
+#else
+/*
+ * Manually set up DDR1 parameters
+ */
+
+#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
+
+#if 0 /* TODO */
+#define CFG_DDR_CS0_BNDS	0x0000000F
+#define CFG_DDR_CS0_CONFIG	0x80010202	/* Enable, no interleaving */
+#define CFG_DDR_EXT_REFRESH	0x00000000
+#define CFG_DDR_TIMING_0	0x00260802
+#define CFG_DDR_TIMING_1	0x3935d322
+#define CFG_DDR_TIMING_2	0x14904cc8
+#define CFG_DDR_MODE_1		0x00480432
+#define CFG_DDR_MODE_2		0x00000000
+#define CFG_DDR_INTERVAL	0x06180100
+#define CFG_DDR_DATA_INIT	0xdeadbeef
+#define CFG_DDR_CLK_CTRL	0x03800000
+#define CFG_DDR_OCD_CTRL	0x00000000
+#define CFG_DDR_OCD_STATUS	0x00000000
+#define CFG_DDR_CONTROL		0xe3008000	/* Type = DDR2 */
+#define CFG_DDR_CONTROL2	0x04400010
+
+#define CFG_DDR_ERR_INT_EN	0x00000000
+#define CFG_DDR_ERR_DIS		0x00000000
+#define CFG_DDR_SBE		0x000f0000
+ /* Not used in fixed_sdram function */
+#define CFG_DDR_MODE		0x00000022
+#define CFG_DDR_CS1_BNDS	0x00000000
+#define CFG_DDR_CS2_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS3_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS4_BNDS	0x00000FFF	/* Not done */
+#define CFG_DDR_CS5_BNDS	0x00000FFF	/* Not done */
+#endif
+#endif
+
+#define CFG_ID_EEPROM
+#define ID_EEPROM_ADDR		0x57
+
+
+#define CFG_FLASH_BASE		0xf0000000 /* start of FLASH 128M */
+#define CFG_FLASH_BASE2		0xf8000000
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_BR0_PRELIM		0xf8001001 /* port size 16bit */
+#define CFG_OR0_PRELIM		0xf8006e65 /* 128MB NOR Flash*/
+
+#define CFG_BR1_PRELIM		0xf0001001 /* port size 16bit */
+#define CFG_OR1_PRELIM		0xf8006e65 /* 128MB Promjet */
+#if 0 /* TODO */
+#define CFG_BR2_PRELIM		0xf0000000
+#define CFG_OR2_PRELIM		0xf0000000 /* 256MB NAND Flash - bank 1 */
+#endif
+#define CFG_BR3_PRELIM		0xe8000801 /* port size 8bit */
+#define CFG_OR3_PRELIM		0xfff06ff7 /* 1MB PIXIS area*/
+
+
+#define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
+#define PIXIS_BASE	0xe8000000	/* PIXIS registers */
+#define PIXIS_ID		0x0	/* Board ID at offset 0 */
+#define PIXIS_VER		0x1	/* Board version at offset 1 */
+#define PIXIS_PVER		0x2	/* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST		0x4	/* PIXIS Reset Control register */
+#define PIXIS_AUX		0x6	/* PIXIS Auxiliary register; Scratch */
+#define PIXIS_SPD		0x7	/* Register for SYSCLK speed */
+#define PIXIS_BRDCFG0		0x8	/* PIXIS Board Configuration Register0*/
+#define PIXIS_VCTL		0x10	/* VELA Control Register */
+#define PIXIS_VCFGEN0		0x12	/* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1		0x13	/* VELA Config Enable 1 */
+#define PIXIS_VBOOT		0x16	/* VELA VBOOT Register */
+#define PIXIS_VSPEED0		0x17	/* VELA VSpeed 0 */
+#define PIXIS_VSPEED1		0x18	/* VELA VSpeed 1 */
+#define PIXIS_VCLKH		0x19	/* VELA VCLKH register */
+#define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
+#define CFG_PIXIS_VBOOT_MASK	0x0C    /* Reset altbank mask*/
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	1024		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef	CFG_RAMBOOT
+#endif
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_SPD_EEPROM
+#define CFG_SDRAM_SIZE	256
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#ifndef CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#else
+#define CFG_INIT_RAM_ADDR	0xe4000000	/* Initial RAM address */
+#endif
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CFG_MALLOC_LEN		(6 * 1024 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU		"PowerPC,8610@0"
+#define OF_SOC		"soc@e0000000"
+#define OF_TBCLK	(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH	"/soc@e0000000/serial@4500"
+
+#define CFG_64BIT_VSPRINTF	1
+#define CFG_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe1000000
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+/* For RTL8139 */
+#define KSEG1ADDR(x)	({u32 _x = le32_to_cpu(*(u32 *)(x)); (&_x); })
+#define _IO_BASE		0x00000000
+
+/* controller 1, Base address 0xa000 */
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/* 1M */
+
+/* controller 2, Base Address 0x9000 */
+#define CFG_PCIE2_MEM_BASE	0x90000000
+#define CFG_PCIE2_MEM_PHYS	CFG_PCIE2_MEM_BASE
+#define CFG_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CFG_PCIE2_IO_PHYS	0xe2000000
+#define CFG_PCIE2_IO_SIZE	0x00100000	/* 1M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_NET
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#define CONFIG_RTL8139
+#define CONFIG_SK98
+#define CONFIG_EEPRO100
+#define CONFIG_TULIP
+#ifdef CONFIG_TULIP
+#define CONFIG_ETHADDR   00:E0:0C:00:00:01
+#endif
+
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI		1
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_USB_KEYBOARD	1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL	1
+#define CFG_USB_OHCI_SLOT_NAME 	"ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#define CFG_OHCI_SWAP_REG_ACCESS	1
+
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR	0xe0000000
+#define PCI_ENET0_MEMADDR	0xe0000000
+#define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SATA_ULI5288
+#define CFG_SCSI_MAX_SCSI_ID	4
+#define CFG_SCSI_MAX_LUN	1
+#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
+#endif
+
+#endif	/* CONFIG_PCI */
+
+/*
+ * BAT0		2G	Cacheable, non-guarded
+ * 0x0000_0000	2G	DDR
+ */
+#define CFG_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
+#define CFG_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
+#define CFG_IBAT0U	CFG_DBAT0U
+
+/*
+ * BAT1		1G	Cache-inhibited, guarded
+ * 0x8000_0000	256M	PCI-1 Memory
+ * 0xa000_0000	256M	PCI-Express 1 Memory
+ * 0x9000_0000	256M	PCI-Express 2 Memory
+ */
+
+#define CFG_DBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U	(CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L	(CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U	CFG_DBAT1U
+
+/*
+ * BAT2		16M	Cache-inhibited, guarded
+ * 0xe100_0000	1M	PCI-1 I/O
+ */
+
+#define CFG_DBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U	(CFG_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U	CFG_DBAT2U
+
+/*
+ * BAT3		32M	Cache-inhibited, guarded
+ * 0xe200_0000	1M	PCI-Express 2 I/O
+ * 0xe300_0000	1M	PCI-Express 1 I/O
+ */
+
+#define CFG_DBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	(CFG_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L	(CFG_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U	CFG_DBAT3U
+
+/*
+ * BAT4		4M	Cache-inhibited, guarded
+ * 0xe000_0000	4M	CCSR
+ */
+#define CFG_DBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U	(CFG_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT4U	CFG_DBAT4U
+
+/*
+ * BAT5		128K	Cacheable, non-guarded
+ * 0xe400_0000	128K	Init RAM for stack in the CPU DCache (no backing memory)
+ */
+#define CFG_DBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_DBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	CFG_DBAT5L
+#define CFG_IBAT5U	CFG_DBAT5U
+
+/*
+ * BAT6		256M	Cache-inhibited, guarded
+ * 0xf000_0000	256M	FLASH
+ */
+#define CFG_DBAT6L	(CFG_FLASH_BASE	 | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6U	(CFG_FLASH_BASE	 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L	(CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	CFG_DBAT6U
+
+/*
+ * BAT7		4M	Cache-inhibited, guarded
+ * 0xe800_0000	4M	PIXIS
+ */
+#define CFG_DBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT \
+			| BATL_GUARDEDSTORAGE)
+#define CFG_DBAT7U	(PIXIS_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT7L	(PIXIS_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT7U	CFG_DBAT7U
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SECT_SIZE	0x20000	/* 126k (one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+#else
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CFG_RAMBOOT)
+#undef CONFIG_CMD_ENV
+#endif
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_USB
+#endif
+
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*DIU Configuration*/
+#define DIU_CONNECT_TO_DVI		/* DIU controller connects to DVI encoder*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_IPADDR		192.168.1.100
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/opt/nfsroot
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	8610hpcd/u-boot.bin
+
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.255.0
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+	"echo e;md ${a}e00 9\0" \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
+	"pci w.w $b.0 56 ffff\0"	\
+ "pci1err=setenv a e0008; run pcierr\0"	\
+ "pci1errc=setenv a e0008; run pcierrc\0"
+#else
+#define	PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0"	\
+ "pcie2regs=setenv a e0009; run pciereg\0"	\
+ "pcieerr=md ${a}020 1; md ${a}e00; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"\
+	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;"	\
+	"pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;"\
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;" \
+	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0"		\
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
+ "pcie1err=setenv a e000a; run pcieerr\0"	\
+ "pcie2err=setenv a e0009; run pcieerr\0"	\
+ "pcie1errc=setenv a e000a; run pcieerrc\0"	\
+ "pcie2errc=setenv a e0009; run pcieerrc\0"
+#else
+#define	PCIE_ENV ""
+#endif
+
+#define DMA_ENV \
+ "dma0=mw ${d}104 ffffffff;mw ${d}110 50000;mw ${d}114 $sad0;mw ${d}118 50000;"\
+	"mw ${d}120 $bc0;mw ${d}100 f03c404; mw ${d}11c $dad0; md ${d}100 9\0" \
+ "dma1=mw ${d}184 ffffffff;mw ${d}190 50000;mw ${d}194 $sad1;mw ${d}198 50000;"\
+	"mw ${d}1a0 $bc1;mw ${d}180 f03c404; mw ${d}19c $dad1; md ${d}180 9\0" \
+ "dma2=mw ${d}204 ffffffff;mw ${d}210 50000;mw ${d}214 $sad2;mw ${d}218 50000;"\
+	"mw ${d}220 $bc2;mw ${d}200 f03c404; mw ${d}21c $dad2; md ${d}200 9\0" \
+ "dma3=mw ${d}284 ffffffff;mw ${d}290 50000;mw ${d}294 $sad3;mw ${d}298 50000;"\
+	"mw ${d}2a0 $bc3;mw ${d}280 f03c404; mw ${d}29c $dad3; md ${d}280 9\0"
+
+#ifdef ENV_DEBUG
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS0\0"						\
+ "ramdiskaddr=2000000\0"					\
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"				\
+ "dtbaddr=c00000\0"						\
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0"				\
+ "bdev=sda3\0"					\
+ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
+ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
+ "maxcpus=1"	\
+ "eoi=mw e00400b0 0\0"						\
+ "iack=md e00400a0 1\0"						\
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4;" \
+	"md ${a}bf0 4; md ${a}e00 3; md ${a}e20 3; md ${a}e40 7;" \
+	"md ${a}f00 5\0" \
+ "ddr1regs=setenv a e0002; run ddrreg\0" \
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}800 1;" \
+	"md ${a}900 6; md ${a}a00 1; md ${a}b20 3; md ${a}e00 1;" \
+	"md ${a}e60 1; md ${a}ef0 1d\0" \
+ "guregs=setenv a e00e0; run gureg\0" \
+ "mcmreg=md ${a}000 1b; md ${a}bf8 2; md ${a}e00 5\0" \
+ "mcmregs=setenv a e0001; run mcmreg\0" \
+ "diuregs=md e002c000 1d\0" \
+ "dium=mw e002c01c\0" \
+ "diuerr=md e002c014 1\0" \
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0 debug\0" \
+ "monitor=0-DVI\0" \
+ "pmregs=md e00e1000 2b\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCI_ENV \
+ PCIE_ENV \
+ DMA_ENV
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS                               \
+ "netdev=eth0\0"                                                \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                         \
+ "consoledev=ttyS0\0"                                           \
+ "ramdiskaddr=2000000\0"                                        \
+ "ramdiskfile=8610hpcd/ramdisk.uboot\0"                         \
+ "dtbaddr=c00000\0"                                             \
+ "dtbfile=8610hpcd/mpc8610_hpcd.dtb\0"                          \
+ "bdev=sda3\0"							\
+ "othbootargs=diufb=15M video=fslfb:1280x1024-32@60,monitor=0\0"\
+ "monitor=0-DVI\0"
+#endif
+
+#define CONFIG_NFSBOOTCOMMAND					\
+ "setenv bootargs root=/dev/nfs rw "				\
+	"nfsroot=$serverip:$rootpath "				\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $dtbaddr $dtbfile;"					\
+ "bootm $loadaddr - $dtbaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw "				\
+	"console=$consoledev,$baudrate $othbootargs;"		\
+ "tftp $ramdiskaddr $ramdiskfile;"				\
+ "tftp $loadaddr $bootfile;"					\
+ "tftp $dtbaddr $dtbfile;"					\
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND		\
+ "setenv bootargs root=/dev/$bdev rw "	\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+ "tftp $loadaddr $bootfile;"		\
+ "tftp $dtbaddr $dtbfile;"		\
+ "bootm $loadaddr - $dtbaddr"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 6f87240..575bbae 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -38,7 +38,6 @@
 #define CONFIG_MPC8641HPCN	1	/* MPC8641HPCN board specific */
 #define CONFIG_NUM_CPUS         2       /* Number of CPUs in the system */
 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
-#undef DEBUG
 
 #ifdef RUN_DIAG
 #define CFG_DIAG_ADDR        0xff800000
@@ -267,13 +266,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Pass open firmware flat tree to kernel
  */
-#define CONFIG_OF_FLAT_TREE	1
-#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
-#define OF_CPU		"PowerPC,8641@0"
-#define OF_SOC		"soc8641@f8000000"
-#define OF_TBCLK	(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH	"/soc8641@f8000000/serial@4500"
 
 #define CFG_64BIT_VSPRINTF	1
 #define CFG_64BIT_STRTOUL	1
@@ -645,8 +641,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
    "consoledev=ttyS0\0"                                                 \
    "ramdiskaddr=2000000\0"						\
    "ramdiskfile=your.ramdisk.u-boot\0"                                  \
-   "dtbaddr=c00000\0"						\
-   "dtbfile=mpc8641_hpcn.dtb\0"                                  \
+   "fdtaddr=c00000\0"						\
+   "fdtfile=mpc8641_hpcn.dtb\0"                                  \
    "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
    "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
    "maxcpus=2"
@@ -658,16 +654,16 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr - $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                  \
       "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "tftp $dtbaddr $dtbfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
+   "tftp $fdtaddr $fdtfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 3d2ed1e..87fca3c 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -167,6 +167,7 @@
  * set up. While still running from cache, I experienced problems accessing
  * the NAND controller.	sr - 2006-08-25
  */
+#if defined (CONFIG_NAND_U_BOOT)
 #define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location                 */
 #define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size                     */
 #define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here    */
@@ -195,6 +196,7 @@
 #define CFG_NAND_OOBSIZE	16
 #define CFG_NAND_ECCTOTAL	(CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
 #define CFG_NAND_ECCPOS		{0, 1, 2, 3, 6, 7}
+#endif
 
 #ifdef CFG_ENV_IS_IN_NAND
 /*
@@ -501,6 +503,7 @@
 #define NAND_MAX_CHIPS		1
 #define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
 #define CFG_NAND_SELECT_DEVICE	1 /* nand driver supports mutipl. chips */
+#define CFG_NAND_QUIET_TEST	1
 
 /*
  * Internal Definitions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 7ecc275..9a0e9b8 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -131,6 +131,7 @@
 /* USB */
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI_NEW
+#define CFG_OHCI_BE_CONTROLLER
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index aff9823..cfe08c8 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -296,7 +296,9 @@
 /*-----------------------------------------------------------------------
  * FPGA stuff
  *-----------------------------------------------------------------------*/
-#define CONFIG_FPGA             CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
 #define CFG_FPGA_CHECK_CTRLC
 #define CFG_FPGA_PROG_FEEDBACK
 #define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
new file mode 100755
index 0000000..f101206
--- /dev/null
+++ b/include/configs/apollon.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2005-2007
+ * Samsung Electronics,
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Configuration settings for the 2420 Samsung Apollon board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM1136		1 /* This is an arm1136 CPU core */
+#define CONFIG_OMAP		1 /* in a TI OMAP core */
+#define CONFIG_OMAP2420		1 /* which is in a 2420 */
+#define CONFIG_OMAP2420_APOLLON	1
+#define CONFIG_APOLLON		1
+#define CONFIG_APOLLON_PLUS	1 /* If you have apollon plus 1.x */
+
+/* Clock config to target*/
+#define PRCM_CONFIG_I		1
+/* #define PRCM_CONFIG_II	1 */
+
+/* Boot method */
+/* uncomment if you use NOR boot */
+/* #define CFG_NOR_BOOT		1 */
+
+/* uncomment if you use NOR on CS3 */
+/* #define CFG_USE_NOR		1 */
+
+#ifdef CFG_NOR_BOOT
+#undef CFG_USE_NOR
+#define CFG_USE_NOR		1
+#endif
+
+#include <asm/arch/omap2420.h>	/* get chip and board defs */
+
+#define	V_SCLK	12000000
+
+/* input clock of PLL */
+/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
+#define	CONFIG_SYS_CLK_FREQ	V_SCLK
+
+#undef	CONFIG_USE_IRQ	/* no support for IRQs */
+#define	CONFIG_MISC_INIT_R
+
+#define	CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define	CONFIG_SETUP_MEMORY_TAGS	1
+#define	CONFIG_INITRD_TAG	1
+#define	CONFIG_REVISION_TAG	1
+
+/*
+ * Size of malloc() pool
+ */
+#define	CFG_ENV_SIZE SZ_128K	/* Total Size of Environment Sector */
+#define	CFG_MALLOC_LEN	(CFG_ENV_SIZE + SZ_128K)
+#define	CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SMC91c96 Etherent
+ */
+#define	CONFIG_DRIVER_LAN91C96
+#define	CONFIG_LAN91C96_BASE	(APOLLON_CS1_BASE+0x300)
+#define	CONFIG_LAN91C96_EXT_PHY
+
+/*
+ * NS16550 Configuration
+ */
+#define	V_NS16550_CLK	(48000000)	/* 48MHz (APLL96/2) */
+
+#define	CFG_NS16550
+#define	CFG_NS16550_SERIAL
+#define	CFG_NS16550_REG_SIZE	(-4)
+#define	CFG_NS16550_CLK	V_NS16550_CLK	/* 3MHz (1.5MHz*2) */
+#define	CFG_NS16550_COM1	OMAP2420_UART1
+
+/*
+ * select serial console configuration
+ */
+#define	CONFIG_SERIAL1	1	/* UART1 on H4 */
+
+ /*
+ * I2C configuration
+ */
+#define	CONFIG_HARD_I2C
+#define	CFG_I2C_SPEED	100000
+#define	CFG_I2C_SLAVE	1
+#define	CONFIG_DRIVER_OMAP24XX_I2C
+
+/* allow to overwrite serial and ethaddr */
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_CONS_INDEX	1
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include	<config_cmd_default.h>
+
+#define	CONFIG_CMD_DHCP
+#define	CONFIG_CMD_DIAG
+#define	CONFIG_CMD_ONENAND
+
+#undef	CONFIG_CMD_AUTOSCRIPT
+
+#ifndef	CFG_USE_NOR
+# undef	CONFIG_CMD_FLASH
+# undef	CONFIG_CMD_IMLS
+#endif
+
+#define	CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
+
+#define	CONFIG_BOOTDELAY	1
+
+#define	CONFIG_NETMASK	255.255.255.0
+#define	CONFIG_IPADDR	192.168.116.25
+#define	CONFIG_SERVERIP	192.168.116.1
+#define	CONFIG_BOOTFILE	"uImage"
+#define	CONFIG_ETHADDR	00:0E:99:00:24:20
+
+#ifdef	CONFIG_APOLLON_PLUS
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#else
+# define	CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"Image=tftp 0x80008000 Image; go 0x80008000\0"			\
+	"zImage=tftp 0x80180000 zImage; go 0x80180000\0"		\
+	"uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"		\
+	"uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"		\
+	"xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"	\
+	"syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"	\
+	"syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"	\
+	"norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"	\
+	"oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+	"onesyncboot=run syncmode oneboot\0"				\
+	"bootcmd=run uboot\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	V_PROMPT	"Apollon # "
+
+#define	CFG_LONGHELP	/* undef to save memory */
+#define	CFG_PROMPT	V_PROMPT
+#define	CFG_CBSIZE	256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define	CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define	CFG_MAXARGS	16	/* max number of command args */
+#define	CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define	CFG_MEMTEST_START 	(OMAP2420_SDRC_CS0)	/* memtest works on */
+#define	CFG_MEMTEST_END		(OMAP2420_SDRC_CS0+SZ_31M)
+
+#undef	CFG_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR	(OMAP2420_SDRC_CS0)	/* default load address */
+
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
+ * or by 32KHz clk, or from external sig. This rate is divided by a local
+ * divisor.
+ */
+#define	V_PVT	7	/* use with 12MHz/128 */
+
+#define	CFG_TIMERBASE	OMAP2420_GPT2
+#define	CFG_PVT	V_PVT	/* 2^(pvt+1) */
+#define	CFG_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define	CONFIG_STACKSIZE SZ_128K	/* regular stack */
+#ifdef	CONFIG_USE_IRQ
+# define	CONFIG_STACKSIZE_IRQ SZ_4K	/* IRQ stack */
+# define	CONFIG_STACKSIZE_FIQ SZ_4K	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define	CONFIG_NR_DRAM_BANKS	1	/* CS1 may or may not be populated */
+#define	PHYS_SDRAM_1		OMAP2420_SDRC_CS0
+#define	PHYS_SDRAM_1_SIZE	SZ_128M
+#define	PHYS_SDRAM_2		OMAP2420_SDRC_CS1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#ifdef	CFG_USE_NOR
+/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
+# define	CFG_FLASH_BASE		0x18000000
+# define	CFG_MAX_FLASH_BANKS	1
+# define	CFG_MAX_FLASH_SECT	1024
+/*-----------------------------------------------------------------------
+
+ * CFI FLASH driver setup
+ */
+# define	CFG_FLASH_CFI	1	/* Flash memory is CFI compliant */
+# define	CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
+# define	CFG_FLASH_PROTECTION	1	/* Use h/w sector protection*/
+
+#else	/* !CFG_USE_NOR */
+# define	CFG_NO_FLASH	1
+#endif	/* CFG_USE_NOR */
+
+/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
+#define	CFG_ONENAND_BASE	0x00000000
+#define	CFG_ENV_IS_IN_ONENAND	1
+#define CFG_ENV_ADDR		0x00020000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 0fac28f..206007d 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -142,7 +142,7 @@
 		"cp.l 100000 f0000b28 1\0"				\
 	"ideargs=setenv bootargs root=/dev/hda1 rw\0"			\
 	"ide_boot=ext2load ide 0:1 200000 uImage;"			\
-		"run ideargs addip addcons enable_disp;bootm"		\
+		"run ideargs addip addcons enable_disp;bootm\0"		\
 	"brightness=255\0"						\
 	""
 
@@ -156,24 +156,24 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		0xFFE00000
-
-#define CFG_FLASH_SIZE		0x00200000 /* 2 MByte */
-#define CFG_MAX_FLASH_SECT	35	/* max num of sects on one chip */
-
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000) /* second sector */
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
-					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1
+#define CFG_FLASH_BASE		0xffe00000
+#define CFG_FLASH_SIZE		0x00200000
+#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster) */
 
 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x4000)
 #define CFG_ENV_SIZE		0x2000
 #define CFG_ENV_SECT_SIZE	0x2000
 #define CONFIG_ENV_OVERWRITE	1
+#define CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * Memory map
@@ -182,7 +182,14 @@
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_DEFAULT_MBAR	0x80000000
 
-#define CONFIG_MPC5200_DDR
+/*
+ * SDRAM controller configuration
+ */
+#undef CONFIG_SDR_MT48LC16M16A2
+#undef CONFIG_DDR_MT46V16M16
+#undef CONFIG_DDR_MT46V32M16
+#undef CONFIG_DDR_HYB25D512160BF
+#define CONFIG_DDR_K4H511638C
 
 /* Use ON-Chip SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
@@ -203,7 +210,7 @@
 #   define CFG_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 0aa4f2d..78c794a 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -111,6 +111,7 @@
 #define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
 #define SPD_EEPROM_ADDRESS	{0x51, 0x52}	/* SPD i2c spd addresses*/
 #define CONFIG_DDR_ECC		1	/* with ECC support		*/
+#define CONFIG_DDR_RQDC_FIXED	0x80000038 /* optimal value found by GDA*/
 #undef  CONFIG_STRESS
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 1ea7d48..7d0640b 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Larry Johnson, lrj@acm.org
  *
  * (C) Copyright 2006-2007
@@ -361,6 +361,157 @@
 #define CFG_EBC_PB2AP		0x04017300
 #define CFG_EBC_PB2CR		(CFG_CPLD_BASE | 0x00038000)
 
+/*-----------------------------------------------------------------------
+ * GPIO Setup
+ *
+ * Korat GPIO usage:
+ *
+ *                   Init.
+ * Pin    Source I/O value Function
+ * ------ ------ --- ----- ---------------------------------
+ * GPIO00  Alt1  I/O   x   PerAddr07
+ * GPIO01  Alt1  I/O   x   PerAddr06
+ * GPIO02  Alt1  I/O   x   PerAddr05
+ * GPIO03  GPIO   x    x   GPIO03 to expansion bus connector
+ * GPIO04  GPIO   x    x   GPIO04 to expansion bus connector
+ * GPIO05  GPIO   x    x   GPIO05 to expansion bus connector
+ * GPIO06  Alt1   O    x   PerCS1 (2nd NOR flash)
+ * GPIO07  Alt1   O    x   PerCS2 (CPLD)
+ * GPIO08  Alt1   O    x   PerCS3 to expansion bus connector
+ * GPIO09  Alt1   O    x   PerCS4 to expansion bus connector
+ * GPIO10  Alt1   O    x   PerCS5 to expansion bus connector
+ * GPIO11  Alt1   I    x   PerErr
+ * GPIO12  GPIO   O    0   ATMega !Reset
+ * GPIO13  GPIO   O    1   SPI Atmega !SS
+ * GPIO14  GPIO   O    1   Write protect EEPROM #1 (0xA8)
+ * GPIO15  GPIO   O    0   CPU Run LED !On
+ * GPIO16  Alt1   O    x   GMC1TxD0
+ * GPIO17  Alt1   O    x   GMC1TxD1
+ * GPIO18  Alt1   O    x   GMC1TxD2
+ * GPIO19  Alt1   O    x   GMC1TxD3
+ * GPIO20  Alt1   I    x   RejectPkt0
+ * GPIO21  Alt1   I    x   RejectPkt1
+ * GPIO22  GPIO   I    x   PGOOD_DDR
+ * GPIO23  Alt1   O    x   SCPD0
+ * GPIO24  Alt1   O    x   GMC0TxD2
+ * GPIO25  Alt1   O    x   GMC0TxD3
+ * GPIO26  GPIO? I/O   x   IIC0SDA (selected in SDR0_PFC4)
+ * GPIO27  GPIO   O    0   PHY #0 1000BASE-X select
+ * GPIO28  GPIO   O    0   PHY #1 1000BASE-X select
+ * GPIO29  GPIO   I    x   Test jumper !Present
+ * GPIO30  GPIO   I    x   SFP module #0 !Present
+ * GPIO31  GPIO   I    x   SFP module #1 !Present
+ *
+ * GPIO32  GPIO   O    1   SFP module #0 Tx !Enable
+ * GPIO33  GPIO   O    1   SFP module #1 Tx !Enable
+ * GPIO34  Alt2   I    x   !UART1_CTS
+ * GPIO35  Alt2   O    x   !UART1_RTS
+ * GPIO36  Alt1   I    x   !UART0_CTS
+ * GPIO37  Alt1   O    x   !UART0_RTS
+ * GPIO38  Alt2   O    x   UART1_Tx
+ * GPIO39  Alt2   I    x   UART1_Rx
+ * GPIO40  Alt1   I    x   IRQ0 (Ethernet 0)
+ * GPIO41  Alt1   I    x   IRQ1 (Ethernet 1)
+ * GPIO42  Alt1   I    x   IRQ2 (PCI interrupt)
+ * GPIO43  Alt1   I    x   IRQ3 (System Alert from CPLD)
+ * GPIO44  xxxx   x    x   (grounded through pulldown)
+ * GPIO45  GPIO   O    0   PHY #0 Enable
+ * GPIO46  GPIO   O    0   PHY #1 Enable
+ * GPIO47  GPIO   I    x   Reset switch !Pressed
+ * GPIO48  GPIO   I    x   Shutdown switch !Pressed
+ * GPIO49  xxxx   x    x   (reserved for trace port)
+ *   .      .     .    .               .
+ *   .      .     .    .               .
+ *   .      .     .    .               .
+ * GPIO63  xxxx   x    x   (reserved for trace port)
+*----------------------------------------------------------------------*/
+
+#define CFG_GPIO_ATMEGA_SS_	13
+#define CFG_GPIO_PHY0_FIBER_SEL	27
+#define CFG_GPIO_PHY1_FIBER_SEL	28
+#define CFG_GPIO_SFP0_PRESENT_	30
+#define CFG_GPIO_SFP1_PRESENT_	31
+#define CFG_GPIO_SFP0_TX_EN_	32
+#define CFG_GPIO_SFP1_TX_EN_	33
+#define CFG_GPIO_PHY0_EN	45
+#define CFG_GPIO_PHY1_EN	46
+
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6	EBC_CS_N(1)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	EBC_CS_N(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	EBC_CS_N(3)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	EBC_CS_N(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO13				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28		USB2D_TXVALID	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
 /*
  * Internal Definitions
  *
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 5210024..0bf536b 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -71,15 +71,20 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
-/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#define CFG_OCM_DATA_ADDR	CFG_OCM_BASE
-
+/*
+ * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
+ * the POST_WORD from OCM to a 440EPx register that preserves it's
+ * content during reset (GPT0_COM6). This way we reserve the OCM (16k)
+ * for logbuffer only.
+ */
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(4 << 10)
-#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data*/
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
-#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+#define CFG_POST_ALT_WORD_ADDR	(CFG_PERIPHERAL_BASE + GPT0_COMP6)
+						/* unused GPT0 COMP reg	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e7d8a5a..9efe3c4 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -310,13 +310,9 @@
 #endif
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_CPU			"PowerPC,8349@0"
-#define OF_SOC			"soc8349@e0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
@@ -458,7 +454,7 @@
 #define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
-    #define CONFG_CMD_PCI
+    #define CONFIG_CMD_PCI
 #endif
 
 #if defined(CFG_RAMBOOT)
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 1f72b54..8929134 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -476,6 +476,83 @@
 #define CFG_NAND_BASE		(CFG_NAND_ADDR + CFG_NAND_CS)
 #define CFG_NAND_SELECT_DEVICE  1	/* nand driver supports mutipl. chips	*/
 
+/*-----------------------------------------------------------------------
+ * PPC440 GPIO Configuration
+ */
+/* test-only: take GPIO init from pcs440ep ???? in config file */
+#define CFG_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
+{											\
+/* GPIO Core 0 */									\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0	EBC_ADDR(7)	DMA_REQ(2)	*/	\
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1	EBC_ADDR(6)	DMA_ACK(2)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO2	EBC_ADDR(5)	DMA_EOT/TC(2)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO3	EBC_ADDR(4)	DMA_REQ(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO4	EBC_ADDR(3)	DMA_ACK(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO5	EBC_ADDR(2)	DMA_EOT/TC(3)	*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO6	EBC_CS_N(1)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7	EBC_CS_N(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8	EBC_CS_N(3)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9	EBC_CS_N(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO12				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO13				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO14				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO15				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO20 RejectPkt0			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO21 RejectPkt1			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO23 SCPD0				*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)			*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)			*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26				*/	\
+{GPIO0_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ	USB2D_RXERROR	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO28		USB2D_TXVALID	*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO29 EBC_EXT_HDLA	USB2D_PAD_SUSPNDM */	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO30 EBC_EXT_ACK	USB2D_XCVRSELECT*/	\
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO31 EBC_EXR_BUSREQ	USB2D_TERMSELECT*/	\
+},											\
+{											\
+/* GPIO Core 1 */									\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)			*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)	DMA_ACK(1)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)	DMA_EOT/TC(1)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)	DMA_REQ(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)	DMA_ACK(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)	DMA_EOT/TC(0)	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit	*/	\
+}											\
+}
+
 /*
  * Internal Definitions
  *
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 3d6c1a8..58e26ab 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -46,6 +46,8 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 			    const char *prop, u32 val, int create);
 int fdt_fixup_memory(void *blob, u64 start, u64 size);
 void fdt_fixup_ethernet(void *fdt, bd_t *bd);
+int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
+			 const void *val, int len, int create);
 
 #ifdef CONFIG_OF_HAS_UBOOT_ENV
 int fdt_env(void *fdt);
diff --git a/include/libfdt.h b/include/libfdt.h
index 8050049..6c05236 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -655,8 +655,65 @@ int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
 /* Write-in-place functions                                           */
 /**********************************************************************/
 
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len.  This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
 			const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary.  This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if the property's length is not equal to 4
+  *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
 					   const char *name, uint32_t val)
 {
@@ -664,7 +721,54 @@ static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
 	return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
 }
 
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_nop_node(void *fdt, int nodeoffset);
 
 /**********************************************************************/
@@ -693,23 +797,242 @@ int fdt_finish(void *fdt);
 int fdt_open_into(const void *fdt, void *buf, int bufsize);
 int fdt_pack(void *fdt);
 
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @addres, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therfore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new reservation entry
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therfore change the indexes of some entries in the table.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ *		are less than n+1 reserve map entries)
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_del_mem_rsv(void *fdt, int n);
 
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creeating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_setprop(void *fdt, int nodeoffset, const char *name,
 		const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
 				   uint32_t val)
 {
 	val = cpu_to_fdt32(val);
 	return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
 }
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 #define fdt_setprop_string(fdt, nodeoffset, name, str) \
 	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node.  This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
 int fdt_add_subnode_namelen(void *fdt, int parentoffset,
 			    const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ *	structure block offset of the created nodeequested subnode (>=0), on success
+ *	-FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ *	-FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ *	-FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ *		the given name
+ *	-FDT_ERR_NOSPACE, if there is insufficient free space in the
+ *		blob to contain the new node
+ *	-FDT_ERR_NOSPACE
+ *	-FDT_ERR_BADLAYOUT
+ *      -FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings.
+ */
 int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
 int fdt_del_node(void *fdt, int nodeoffset);
 
 /**********************************************************************/
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 4d32c6a..dba1aea 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -98,10 +98,21 @@
 #define SPR_8321E_REV11			0x80660011
 #define SPR_8321_REV11			0x80670011
 
-#define SPR_8311_REV10			0x80B30010
-#define SPR_8311E_REV10			0x80B20010
-#define SPR_8313_REV10			0x80B10010
 #define SPR_8313E_REV10			0x80B00010
+#define SPR_8313_REV10			0x80B10010
+#define SPR_8311E_REV10			0x80B20010
+#define SPR_8311_REV10			0x80B30010
+#define SPR_8315E_REV10			0x80B40010
+#define SPR_8315_REV10			0x80B50010
+#define SPR_8314E_REV10			0x80B60010
+#define SPR_8314_REV10			0x80B70010
+
+#define SPR_8379E_REV10			0x80C20010
+#define SPR_8379_REV10			0x80C30010
+#define SPR_8378E_REV10			0x80C40010
+#define SPR_8378_REV10			0x80C50010
+#define SPR_8377E_REV10			0x80C60010
+#define SPR_8377_REV10			0x80C70010
 
 /* SPCR - System Priority Configuration Register
  */
@@ -130,8 +141,8 @@
 #define SPCR_TSEC2EP			0x00000003	/* TSEC2 emergency priority */
 #define SPCR_TSEC2EP_SHIFT		(31-31)
 
-#elif defined(CONFIG_MPC831X)
-/* SPCR bits - MPC831x specific */
+#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+/* SPCR bits - MPC831x and MPC837x specific */
 #define SPCR_TSECDP			0x00003000	/* TSEC data priority */
 #define SPCR_TSECDP_SHIFT		(31-19)
 #define SPCR_TSECEP			0x00000C00	/* TSEC emergency priority */
@@ -213,8 +224,8 @@
 #define SICRL_URT_CTPR			0x06000000
 #define SICRL_IRQ_CTPR			0x00C00000
 
-#elif defined(CONFIG_MPC831X)
-/* SICRL bits - MPC831x specific */
+#elif defined(CONFIG_MPC8313)
+/* SICRL bits - MPC8313 specific */
 #define SICRL_LBC			0x30000000
 #define SICRL_UART			0x0C000000
 #define SICRL_SPI_A			0x03000000
@@ -225,7 +236,7 @@
 #define SICRL_ETSEC1_A			0x0000000C
 #define SICRL_ETSEC2_A			0x00000003
 
-/* SICRH bits - MPC831x specific */
+/* SICRH bits - MPC8313 specific */
 #define SICRH_INTR_A			0x02000000
 #define SICRH_INTR_B			0x00C00000
 #define SICRH_IIC			0x00300000
@@ -242,6 +253,90 @@
 #define SICRH_TSOBI1			0x00000002
 #define SICRH_TSOBI2			0x00000001
 
+#elif defined(CONFIG_MPC8315)
+/* SICRL bits - MPC8315 specific */
+#define SICRL_DMA_CH0			0xc0000000
+#define SICRL_DMA_SPI			0x30000000
+#define SICRL_UART			0x0c000000
+#define SICRL_IRQ4			0x02000000
+#define SICRL_IRQ5			0x01800000
+#define SICRL_IRQ6_7			0x00400000
+#define SICRL_IIC1			0x00300000
+#define SICRL_TDM			0x000c0000
+#define SICRL_TDM_SHARED		0x00030000
+#define SICRL_PCI_A			0x0000c000
+#define SICRL_ELBC_A			0x00003000
+#define SICRL_ETSEC1_A			0x000000c0
+#define SICRL_ETSEC1_B			0x00000030
+#define SICRL_ETSEC1_C			0x0000000c
+#define SICRL_TSEXPOBI			0x00000001
+
+/* SICRH bits - MPC8315 specific */
+#define SICRH_GPIO_0			0xc0000000
+#define SICRH_GPIO_1			0x30000000
+#define SICRH_GPIO_2			0x0c000000
+#define SICRH_GPIO_3			0x03000000
+#define SICRH_GPIO_4			0x00c00000
+#define SICRH_GPIO_5			0x00300000
+#define SICRH_GPIO_6			0x000c0000
+#define SICRH_GPIO_7			0x00030000
+#define SICRH_GPIO_8			0x0000c000
+#define SICRH_GPIO_9			0x00003000
+#define SICRH_GPIO_10			0x00000c00
+#define SICRH_GPIO_11			0x00000300
+#define SICRH_ETSEC2_A			0x000000c0
+#define SICRH_TSOBI1			0x00000002
+#define SICRH_TSOBI2			0x00000001
+
+#elif defined(CONFIG_MPC837X)
+/* SICRL bits - MPC837x specific */
+#define SICRL_USB_A			0xC0000000
+#define SICRL_USB_B			0x30000000
+#define SICRL_UART			0x0C000000
+#define SICRL_GPIO_A			0x02000000
+#define SICRL_GPIO_B			0x01000000
+#define SICRL_GPIO_C			0x00800000
+#define SICRL_GPIO_D			0x00400000
+#define SICRL_GPIO_E			0x00200000
+#define SICRL_GPIO_F			0x00180000
+#define SICRL_GPIO_G			0x00040000
+#define SICRL_GPIO_H			0x00020000
+#define SICRL_GPIO_I			0x00010000
+#define SICRL_GPIO_J			0x00008000
+#define SICRL_GPIO_K			0x00004000
+#define SICRL_GPIO_L			0x00003000
+#define SICRL_DMA_A			0x00000800
+#define SICRL_DMA_B			0x00000400
+#define SICRL_DMA_C			0x00000200
+#define SICRL_DMA_D			0x00000100
+#define SICRL_DMA_E			0x00000080
+#define SICRL_DMA_F			0x00000040
+#define SICRL_DMA_G			0x00000020
+#define SICRL_DMA_H			0x00000010
+#define SICRL_DMA_I			0x00000008
+#define SICRL_DMA_J			0x00000004
+#define SICRL_LDP_A			0x00000002
+#define SICRL_LDP_B			0x00000001
+
+/* SICRH bits - MPC837x specific */
+#define SICRH_DDR			0x80000000
+#define SICRH_TSEC1_A			0x10000000
+#define SICRH_TSEC1_B			0x08000000
+#define SICRH_TSEC2_A			0x00400000
+#define SICRH_TSEC2_B			0x00200000
+#define SICRH_TSEC2_C			0x00100000
+#define SICRH_TSEC2_D			0x00080000
+#define SICRH_TSEC2_E			0x00040000
+#define SICRH_TMR			0x00010000
+#define SICRH_GPIO2_A			0x00008000
+#define SICRH_GPIO2_B			0x00004000
+#define SICRH_GPIO2_C			0x00002000
+#define SICRH_GPIO2_D			0x00001000
+#define SICRH_GPIO2_E			0x00000C00
+#define SICRH_GPIO2_F			0x00000300
+#define SICRH_GPIO2_G			0x000000C0
+#define SICRH_GPIO2_H			0x00000030
+#define SICRH_SPI			0x00000003
 #endif
 
 /* SWCRR - System Watchdog Control Register
@@ -390,6 +485,14 @@
 #define HRCWL_CE_TO_PLL_1X29		0x0000001D
 #define HRCWL_CE_TO_PLL_1X30		0x0000001E
 #define HRCWL_CE_TO_PLL_1X31		0x0000001F
+
+#elif defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+#define HRCWL_SVCOD			0x30000000
+#define HRCWL_SVCOD_SHIFT		28
+#define HRCWL_SVCOD_DIV_4		0x00000000
+#define HRCWL_SVCOD_DIV_8		0x10000000
+#define HRCWL_SVCOD_DIV_2		0x20000000
+#define HRCWL_SVCOD_DIV_1		0x30000000
 #endif
 
 /* HRCWH - Hardware Reset Configuration Word High
@@ -436,11 +539,14 @@
 #if defined(CONFIG_MPC834X)
 #define HRCWH_ROM_LOC_PCI2		0x00200000
 #endif
+#if defined(CONIFG_MPC837X)
+#define HRCWH_ROM_LOC_ON_CHIP_ROM	0x00300000
+#endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT	0x00500000
 #define HRCWH_ROM_LOC_LOCAL_16BIT	0x00600000
 #define HRCWH_ROM_LOC_LOCAL_32BIT	0x00700000
 
-#if defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
 #define HRCWH_ROM_LOC_NAND_SP_8BIT	0x00100000
 #define HRCWH_ROM_LOC_NAND_SP_16BIT	0x00200000
 #define HRCWH_ROM_LOC_NAND_LP_8BIT	0x00500000
@@ -489,8 +595,13 @@
 
 /* RSR - Reset Status Register
  */
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+#define RSR_RSTSRC			0xF0000000	/* Reset source */
+#define RSR_RSTSRC_SHIFT		28
+#else
 #define RSR_RSTSRC			0xE0000000	/* Reset source */
 #define RSR_RSTSRC_SHIFT		29
+#endif
 #define RSR_BSF				0x00010000	/* Boot seq. fail */
 #define RSR_BSF_SHIFT			16
 #define RSR_SWSR			0x00002000	/* software soft reset */
@@ -577,8 +688,8 @@
 #define SCCR_PCICM			0x00010000
 #define SCCR_PCICM_SHIFT		16
 
-/* SCCR bits - MPC8349 specific */
-#ifdef CONFIG_MPC834X
+#if defined(CONFIG_MPC834X)
+/* SCCR bits - MPC834x specific */
 #define SCCR_TSEC1CM			0xc0000000
 #define SCCR_TSEC1CM_SHIFT		30
 #define SCCR_TSEC1CM_0			0x00000000
@@ -593,7 +704,19 @@
 #define SCCR_TSEC2CM_2			0x20000000
 #define SCCR_TSEC2CM_3			0x30000000
 
-#elif defined(CONFIG_MPC831X)
+/* The MPH must have the same clock ratio as DR, unless its clock disabled */
+#define SCCR_USBMPHCM			0x00c00000
+#define SCCR_USBMPHCM_SHIFT		22
+#define SCCR_USBDRCM			0x00300000
+#define SCCR_USBDRCM_SHIFT		20
+#define SCCR_USBCM			0x00f00000
+#define SCCR_USBCM_SHIFT		20
+#define SCCR_USBCM_0			0x00000000
+#define SCCR_USBCM_1			0x00500000
+#define SCCR_USBCM_2			0x00A00000
+#define SCCR_USBCM_3			0x00F00000
+
+#elif defined(CONFIG_MPC8313)
 /* TSEC1 bits are for TSEC2 as well */
 #define SCCR_TSEC1CM			0xc0000000
 #define SCCR_TSEC1CM_SHIFT		30
@@ -606,17 +729,109 @@
 #define SCCR_TSEC2ON			0x10000000
 #define SCCR_TSEC2ON_SHIFT		28
 
-#endif
+#define SCCR_USBDRCM			0x00300000
+#define SCCR_USBDRCM_SHIFT		20
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00100000
+#define SCCR_USBDRCM_2			0x00200000
+#define SCCR_USBDRCM_3			0x00300000
+
+#elif defined(CONFIG_MPC8315)
+/* SCCR bits - MPC8315 specific */
+#define SCCR_TSEC1CM			0xc0000000
+#define SCCR_TSEC1CM_SHIFT		30
+#define SCCR_TSEC1CM_0			0x00000000
+#define SCCR_TSEC1CM_1			0x40000000
+#define SCCR_TSEC1CM_2			0x80000000
+#define SCCR_TSEC1CM_3			0xC0000000
+
+#define SCCR_TSEC2CM			0x30000000
+#define SCCR_TSEC2CM_SHIFT		28
+#define SCCR_TSEC2CM_0			0x00000000
+#define SCCR_TSEC2CM_1			0x10000000
+#define SCCR_TSEC2CM_2			0x20000000
+#define SCCR_TSEC2CM_3			0x30000000
 
-#define SCCR_USBMPHCM			0x00c00000
-#define SCCR_USBMPHCM_SHIFT		22
 #define SCCR_USBDRCM			0x00300000
 #define SCCR_USBDRCM_SHIFT		20
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00100000
+#define SCCR_USBDRCM_2			0x00200000
+#define SCCR_USBDRCM_3			0x00300000
+
+#define SCCR_PCIEXP1CM			0x00080000
+#define SCCR_PCIEXP2CM			0x00040000
+
+#define SCCR_SATA1CM			0x0000c000
+#define SCCR_SATA1CM_SHIFT		14
+#define SCCR_SATACM			0x0000f000
+#define SCCR_SATACM_SHIFT		8
+#define SCCR_SATACM_0			0x00000000
+#define SCCR_SATACM_1			0x00005000
+#define SCCR_SATACM_2			0x0000a000
+#define SCCR_SATACM_3			0x0000f000
+
+#define SCCR_TDMCM			0x000000c0
+#define SCCR_TDMCM_SHIFT		6
+#define SCCR_TDMCM_0			0x00000000
+#define SCCR_TDMCM_1			0x00000040
+#define SCCR_TDMCM_2			0x00000080
+#define SCCR_TDMCM_3			0x000000c0
+
+#elif defined(CONFIG_MPC837X)
+/* SCCR bits - MPC837x specific */
+#define SCCR_TSEC1CM			0xc0000000
+#define SCCR_TSEC1CM_SHIFT		30
+#define SCCR_TSEC1CM_0			0x00000000
+#define SCCR_TSEC1CM_1			0x40000000
+#define SCCR_TSEC1CM_2			0x80000000
+#define SCCR_TSEC1CM_3			0xC0000000
 
-#define SCCR_USBCM_0			0x00000000
-#define SCCR_USBCM_1			0x00500000
-#define SCCR_USBCM_2			0x00A00000
-#define SCCR_USBCM_3			0x00F00000
+#define SCCR_TSEC2CM			0x30000000
+#define SCCR_TSEC2CM_SHIFT		28
+#define SCCR_TSEC2CM_0			0x00000000
+#define SCCR_TSEC2CM_1			0x10000000
+#define SCCR_TSEC2CM_2			0x20000000
+#define SCCR_TSEC2CM_3			0x30000000
+
+#define SCCR_SDHCCM			0x0c000000
+#define SCCR_SDHCCM_SHIFT		26
+#define SCCR_SDHCCM_0			0x00000000
+#define SCCR_SDHCCM_1			0x04000000
+#define SCCR_SDHCCM_2			0x08000000
+#define SCCR_SDHCCM_3			0x0c000000
+
+#define SCCR_USBDRCM			0x00c00000
+#define SCCR_USBDRCM_SHIFT		22
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00400000
+#define SCCR_USBDRCM_2			0x00800000
+#define SCCR_USBDRCM_3			0x00c00000
+
+#define SCCR_PCIEXP1CM			0x00300000
+#define SCCR_PCIEXP1CM_SHIFT		20
+#define SCCR_PCIEXP1CM_0		0x00000000
+#define SCCR_PCIEXP1CM_1		0x00100000
+#define SCCR_PCIEXP1CM_2		0x00200000
+#define SCCR_PCIEXP1CM_3		0x00300000
+
+#define SCCR_PCIEXP2CM			0x000c0000
+#define SCCR_PCIEXP2CM_SHIFT		18
+#define SCCR_PCIEXP2CM_0		0x00000000
+#define SCCR_PCIEXP2CM_1		0x00040000
+#define SCCR_PCIEXP2CM_2		0x00080000
+#define SCCR_PCIEXP2CM_3		0x000c0000
+
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM			0x000000c0
+#define SCCR_SATA1CM_SHIFT		6
+#define SCCR_SATACM			0x000000ff
+#define SCCR_SATACM_SHIFT		0
+#define SCCR_SATACM_0			0x00000000
+#define SCCR_SATACM_1			0x00000055
+#define SCCR_SATACM_2			0x000000aa
+#define SCCR_SATACM_3			0x000000ff
+#endif
 
 /* CSn_BDNS - Chip Select memory Bounds Register
  */
@@ -860,7 +1075,7 @@
 #define BR_MS_UPMA			0x00000080	/* UPMA */
 #define BR_MS_UPMB			0x000000A0	/* UPMB */
 #define BR_MS_UPMC			0x000000C0	/* UPMC */
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+#if !defined(CONFIG_MPC834X)
 #define BR_ATOM				0x0000000C
 #define BR_ATOM_SHIFT			2
 #endif
@@ -869,7 +1084,7 @@
 
 #if defined(CONFIG_MPC834X)
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#elif defined(CONFIG_MPC8360)
+#else
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
 #endif
 
@@ -1255,7 +1470,7 @@
 #define LTESR_CS		0x00080000
 #define LTESR_CC		0x00000001
 
-/* DDR Control Driver Register
+/* DDRCDR - DDR Control Driver Register
  */
 #define DDRCDR_EN		0x40000000
 #define DDRCDR_PZ		0x3C000000
diff --git a/include/net.h b/include/net.h
index 603452a..f6decdc 100644
--- a/include/net.h
+++ b/include/net.h
@@ -122,6 +122,9 @@ extern void eth_set_enetaddr(int num, char* a);	/* Set new MAC address		*/
 
 extern int eth_init(bd_t *bis);			/* Initialize the device	*/
 extern int eth_send(volatile void *packet, int length);	   /* Send a packet	*/
+#ifdef CONFIG_API
+extern int eth_receive(volatile void *packet, int length); /* Receive a packet	*/
+#endif
 extern int eth_rx(void);			/* Check for received packets	*/
 extern void eth_halt(void);			/* stop SCC			*/
 extern char *eth_get_name(void);		/* get name of current device	*/
diff --git a/include/ppc440.h b/include/ppc440.h
index 90e56b0..907744b 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -492,6 +492,7 @@
 #define SDRAM_ECCCR	0x98	/* ECC error status                          */
 #define SDRAM_CID	0xA4	/* core ID                                   */
 #define SDRAM_RID	0xA8	/* revision ID                               */
+#define SDRAM_RTSR	0xB1	/* run time status tracking                  */
 
 /*-----------------------------------------------------------------------------+
 |  Memory Controller Status
@@ -605,8 +606,8 @@
 #define SDRAM_RFDC_ARSE_ENABLE		0x00000000
 #define SDRAM_RFDC_RFOS_MASK		0x007F0000
 #define SDRAM_RFDC_RFOS_ENCODE(n)	((((unsigned long)(n))&0x7F)<<16)
-#define SDRAM_RFDC_RFFD_MASK		0x000003FF
-#define SDRAM_RFDC_RFFD_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<0)
+#define SDRAM_RFDC_RFFD_MASK		0x000007FF
+#define SDRAM_RFDC_RFFD_ENCODE(n)	((((unsigned long)(n))&0x7FF)<<0)
 
 #define SDRAM_RFDC_RFFD_MAX		0x7FF
 
@@ -690,6 +691,7 @@
 #define SDRAM_CLKTR_CLKP_MASK		0xC0000000
 #define SDRAM_CLKTR_CLKP_0_DEG		0x00000000
 #define SDRAM_CLKTR_CLKP_180_DEG_ADV	0x80000000
+#define SDRAM_CLKTR_CLKP_90_DEG_ADV	0x40000000
 
 /*-----------------------------------------------------------------------------+
 |  SDRAM Write Timing Register
@@ -790,6 +792,12 @@
 #define SDRAM_BXCF_M_BE_DISABLE		0x00000000	/* Memory Bank Enable	*/
 #define SDRAM_BXCF_M_BE_ENABLE		0x00000001	/* Memory Bank Enable	*/
 
+#define SDRAM_RTSR_TRK1SM_MASK		0xC0000000	/* Tracking State Mach 1*/
+#define SDRAM_RTSR_TRK1SM_ATBASE	0x00000000	/* atbase state		*/
+#define SDRAM_RTSR_TRK1SM_MISSED	0x40000000	/* missed state		*/
+#define SDRAM_RTSR_TRK1SM_ATPLS1	0x80000000	/* atpls1 state		*/
+#define SDRAM_RTSR_TRK1SM_RESET		0xC0000000	/* reset  state		*/
+
 #define SDR0_MFR_FIXD			0x10000000	/* Workaround for PCI/DMA */
 #endif /* CONFIG_440SPE */
 
@@ -1354,8 +1362,6 @@
 #define plb1_bearl                (PLB_ARBITER_BASE+ 0x0C)
 #define plb1_bearh                (PLB_ARBITER_BASE+ 0x0D)
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 /* Pin Function Control Register 1 */
 #define SDR0_PFC1                    0x4101
 #define   SDR0_PFC1_U1ME_MASK         0x02000000    /* UART1 Mode Enable */
@@ -1421,7 +1427,7 @@
 #define   SDR0_MFR_PKT_REJ_EN1         0x00080000   /* Pkt Rej. Enable on EMAC3(1) */
 #define   SDR0_MFR_PKT_REJ_POL         0x00200000   /* Packet Reject Polarity */
 
-#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+#define GPT0_COMP6			0x00000098
 
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 #define SDR0_USB2D0CR                 0x0320
diff --git a/include/spartan2.h b/include/spartan2.h
index d2e81e3..bd159e1 100644
--- a/include/spartan2.h
+++ b/include/spartan2.h
@@ -58,6 +58,7 @@ typedef struct {
 	Xilinx_init_fn	init;
 	Xilinx_done_fn	done;
 	Xilinx_wr_fn	wr;
+	Xilinx_post_fn	post;
 	int           	relocated;
 } Xilinx_Spartan2_Slave_Serial_fns;
 
@@ -69,6 +70,7 @@ typedef struct {
 #define XILINX_XC2S50_SIZE  	559232/8
 #define XILINX_XC2S100_SIZE 	781248/8
 #define XILINX_XC2S150_SIZE 	1040128/8
+#define XILINX_XC2S200_SIZE 	1335872/8
 
 /* Spartan-IIE (1.8V) */
 #define XILINX_XC2S50E_SIZE     630048/8
@@ -95,6 +97,9 @@ typedef struct {
 #define XILINX_XC2S150_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie }
 
+#define XILINX_XC2S200_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie }
+
 #define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie }
 
diff --git a/include/spartan3.h b/include/spartan3.h
index 65a3f5a..c203eeb 100644
--- a/include/spartan3.h
+++ b/include/spartan3.h
@@ -58,6 +58,7 @@ typedef struct {
 	Xilinx_init_fn	init;
 	Xilinx_done_fn	done;
 	Xilinx_wr_fn	wr;
+	Xilinx_post_fn	post;
 	int           	relocated;
 } Xilinx_Spartan3_Slave_Serial_fns;
 
@@ -80,9 +81,12 @@ typedef struct {
 #define	XILINX_XC3S1200E_SIZE	3841184/8
 #define	XILINX_XC3S1600E_SIZE	5969696/8
 
+/* Spartan-IIIE (1.2V) */
+#define XILINX_XC3S1200E_SIZE  	3841184/8
+
 /* Descriptor Macros
  *********************************************************************/
-/* Spartan-II devices */
+/* Spartan-III devices */
 #define XILINX_XC3S50_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie }
 
@@ -124,4 +128,9 @@ typedef struct {
 #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \
 { Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie }
 
+
+/* Spartan-IIIE devices */
+#define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \
+{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie }
+
 #endif /* _SPARTAN3_H_ */
diff --git a/include/xilinx.h b/include/xilinx.h
index 3704e1d..95ebe3d 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -31,11 +31,11 @@
  *********************************************************************/
 #define CFG_SPARTAN2 			CFG_FPGA_DEV( 0x1 )
 #define CFG_VIRTEX_E 			CFG_FPGA_DEV( 0x2 )
-#define CFG_VIRTEX2	 			CFG_FPGA_DEV( 0x4 )
+#define CFG_VIRTEX2			CFG_FPGA_DEV( 0x4 )
 #define CFG_SPARTAN3 			CFG_FPGA_DEV( 0x8 )
 #define CFG_XILINX_SPARTAN2 	(CFG_FPGA_XILINX | CFG_SPARTAN2)
 #define CFG_XILINX_VIRTEX_E 	(CFG_FPGA_XILINX | CFG_VIRTEX_E)
-#define CFG_XILINX_VIRTEX2	 	(CFG_FPGA_XILINX | CFG_VIRTEX2)
+#define CFG_XILINX_VIRTEX2	(CFG_FPGA_XILINX | CFG_VIRTEX2)
 #define CFG_XILINX_SPARTAN3 	(CFG_FPGA_XILINX | CFG_SPARTAN3)
 /* XXX - Add new models here */