* Avoid flicker on the TRAB's VFD by synchronizing the enable with

  the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  boards, version 153 for Rev. 200 boards).

* Patch by Vladimir Gurevich, 12 Mar 2003:
  Fix relocation problem of statically initialized string pointers
  in common/cmd_pci.c

* Patch by Kai-Uwe Blöm, 12 Mar 2003:
  Cleanup & bug fixes for JFFS2 code:
  - the memory mangement was broken. It caused havoc on malloc by
    writing beyond the block boundaries.
  - the length calculation for files was wrong, sometimes resulting
    in short file reads.
  - data copying now optionally takes fragment version numbers into
    account, to avoid copying from older data.
  See doc/README.JFFS2 for details.

4 files changed, 79 insertions, 58 deletions

diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h
index e0a95e0..892710d 100644
--- a/include/asm-arm/global_data.h
+++ b/include/asm-arm/global_data.h
@@ -44,7 +44,6 @@ typedef	struct	global_data {
 #ifdef CONFIG_VFD
 	unsigned long	fb_base;	/* base address of frame buffer */
 	unsigned char	vfd_type;	/* display type */
-	unsigned char	vfd_inv_data;	/* inverted data lines ? */
 #endif
 #if 0
 	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 0d55ca2..122419f 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -71,22 +71,37 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
 #include <asm/arch/io.h>
 
 /*
- * IO definitions.  We define {out,in,outs,ins}[bwl] if __io is defined
- * by the machine.  Otherwise, these definitions are left for the machine
- * specific header files to pick up.
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
  *
  * Note that we prevent GCC re-ordering or caching values in expressions
  * by introducing sequence points into the in*() definitions.  Note that
  * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
  */
 #ifdef __io
 #define outb(v,p)			__raw_writeb(v,__io(p))
-#define outw(v,p)			__raw_writew(v,__io(p))
-#define outl(v,p)			__raw_writel(v,__io(p))
+#define outw(v,p)			__raw_writew(cpu_to_le16(v),__io(p))
+#define outl(v,p)			__raw_writel(cpu_to_le32(v),__io(p))
 
-#define inb(p)		({ unsigned int __v = __raw_readb(__io(p)); __v; })
-#define inw(p)		({ unsigned int __v = __raw_readw(__io(p)); __v; })
-#define inl(p)		({ unsigned int __v = __raw_readl(__io(p)); __v; })
+#define inb(p)	({ unsigned int __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; })
+#define inl(p)	({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; })
 
 #define outsb(p,d,l)			__raw_writesb(__io(p),d,l)
 #define outsw(p,d,l)			__raw_writesw(__io(p),d,l)
@@ -171,20 +186,20 @@ extern void __readwrite_bug(const char *fn);
  */
 #ifdef __mem_pci
 
-#define readb(addr) ({ unsigned int __v = __raw_readb(__mem_pci(addr)); __v; })
-#define readw(addr) ({ unsigned int __v = __raw_readw(__mem_pci(addr)); __v; })
-#define readl(addr) ({ unsigned int __v = __raw_readl(__mem_pci(addr)); __v; })
+#define readb(c) ({ unsigned int __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ unsigned int __v = le16_to_cpu(__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ unsigned int __v = le32_to_cpu(__raw_readl(__mem_pci(c))); __v; })
 
-#define writeb(val,addr)		__raw_writeb(val,__mem_pci(addr))
-#define writew(val,addr)		__raw_writew(val,__mem_pci(addr))
-#define writel(val,addr)		__raw_writel(val,__mem_pci(addr))
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew(cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel(cpu_to_le32(v),__mem_pci(c))
 
-#define memset_io(a,b,c)		_memset_io(__mem_pci(a),(b),(c))
-#define memcpy_fromio(a,b,c)		_memcpy_fromio((a),__mem_pci(b),(c))
-#define memcpy_toio(a,b,c)		_memcpy_toio(__mem_pci(a),(b),(c))
+#define memset_io(c,v,l)		_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio(__mem_pci(c),(a),(l))
 
-#define eth_io_copy_and_sum(a,b,c,d) \
-				eth_copy_and_sum((a),__mem_pci(b),(c),(d))
+#define eth_io_copy_and_sum(s,c,l,b) \
+				eth_copy_and_sum((s),__mem_pci(c),(l),(b))
 
 static inline int
 check_signature(unsigned long io_addr, const unsigned char *signature,
@@ -219,14 +234,6 @@ out:
 #endif	/* __mem_pci */
 
 /*
- * remap a physical address `phys' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_page_range(from,phys,size,prot) \
-		remap_page_range(from,phys,size,prot)
-
-
-/*
  * If this architecture has ISA IO, then define the isa_read/isa_write
  * macros.
  */
@@ -245,6 +252,10 @@ out:
 #define isa_eth_io_copy_and_sum(a,b,c,d) \
 				eth_copy_and_sum((a),__mem_isa(b),(c),(d))
 
+#ifndef PCI_MEMORY_VADDR	/* XXX problem not understood -- wd */
+#define	PCI_MEMORY_VADDR	0
+#endif	/* XXX */
+
 static inline int
 isa_check_signature(unsigned long io_addr, const unsigned char *signature,
 		    int length)
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index a8ee99a..c2267bd 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -60,9 +60,9 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE		19200
+#define CONFIG_MISC_INIT_R	1	/* we have a misc_init_r() function */
 
-#define CONFIG_COMMANDS		((CONFIG_CMD_DFL | CFG_CMD_I2C | CFG_CMD_EEPROM) & ~CFG_CMD_NET)
-
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL|CFG_CMD_I2C|CFG_CMD_EEPROM|CFG_CMD_NET|CFG_CMD_JFFS2|CFG_CMD_DHCP)
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any)   */
 #include <cmd_confdefs.h>
 
@@ -90,13 +90,13 @@
 /*
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
  * used for the RAM copy of the uboot code
+ *
  */
-/* #define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024) */
-#define CFG_MALLOC_LEN		(128*1024)
+#define CFG_MALLOC_LEN		(256*1024)
 
 #define CFG_LONGHELP				/* undef to save memory         */
 #define CFG_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CFG_CBSIZE		128		/* Console I/O Buffer Size      */
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS		16		/* max number of command args   */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
@@ -106,10 +106,7 @@
 
 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
-						/* RS: where is this documented? */
-						/* RS: is this where U-Boot is  */
-						/* RS: relocated to in RAM?      */
+#define CFG_LOAD_ADDR           0xa3000000      /* load kernel to this address   */
 
 #define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 						/* RS: the oscillator is actually 3680130?? */
@@ -128,9 +125,9 @@
 /*
  * I2C bus
  */
-#define CONFIG_HARD_I2C 1
-#define CFG_I2C_SPEED 50000
-#define CFG_I2C_SLAVE 0xfe
+#define CONFIG_HARD_I2C 		1
+#define CFG_I2C_SPEED 			50000
+#define CFG_I2C_SLAVE 			0xfe
 
 #define CFG_ENV_IS_IN_EEPROM 		1
 
@@ -138,9 +135,20 @@
 #define CFG_ENV_SIZE			1024	/* 1 KiB                    */
 #define CFG_I2C_EEPROM_ADDR		0x50	/* A0 = 0 (hardwired)       */
 #define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 5 bits = 32 octets       */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* between stop and start   */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	15	/* between stop and start   */
 #define CFG_I2C_EEPROM_ADDR_LEN		2	/* length of address        */
 #define CFG_EEPROM_SIZE			4096	/* size in bytes            */
+#define CFG_I2C_INIT_BOARD		1	/* board has it's own init  */
+
+/*
+ * SMSC91C111 Network Card
+ */
+#define CONFIG_DRIVER_SMC91111		1
+#define CONFIG_SMC91111_BASE		0x14000000 /* chip select 5         */
+#undef  CONFIG_SMC_USE_32_BIT		           /* 16 bit bus access     */
+#undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
+#undef  CONFIG_SHOW_ACTIVITY
+#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
 
 /*
  * Stack sizes
@@ -168,11 +176,19 @@
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
 
+
 /*
- * GPIO settings;
+ * JFFS2 Partitions
  */
+#define CFG_JFFS_CUSTOM_PART	1		/* see board/innokom/flash.c */
+#define CONFIG_MTD_INNOKOM_16MB 1		/* development flash         */	
+#undef  CONFIG_MTD_INNOKOM_64MB			/* production flash          */
 
-/* GP15 == nCS1      is 1
+
+/*
+ * GPIO settings; see BDI2000 config file for details
+ *
+ * GP15 == nCS1      is 1
  * GP24 == SFRM      is 1
  * GP25 == TXD       is 1
  * GP33 == nCS5      is 1
@@ -273,6 +289,7 @@
 #define CFG_GAFR2_L_VAL     0xA0000000
 #define CFG_GAFR2_U_VAL     0x00000002
 
+
 /* FIXME: set GPIO_RER/FER */
 
 /* RDH = 1
@@ -285,9 +302,8 @@
 
 /*
  * Memory settings
- */
-
-/* This is the configuration for nCS0/1 -> flash banks
+ *
+ * This is the configuration for nCS0/1 -> flash banks
  * configuration for nCS1:
  * [31]    0    - Slower Device
  * [30:28] 010  - CS deselect to CS time: 2*(2*MemClk) = 40 ns
@@ -321,7 +337,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC1_VAL		0x132C593C /* TDM switch, DSP               */
+#define CFG_MSC1_VAL		0x123C593C /* TDM switch, DSP               */
 
 /* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
  *
@@ -340,7 +356,7 @@
  * [03]    1    - 16 Bit bus width
  * [02:00] 100  - variable latency I/O
  */
-#define CFG_MSC2_VAL		0x132C6CDC /* extra bus, LAN controller     */
+#define CFG_MSC2_VAL		0x123C6CDC /* extra bus, LAN controller     */
 
 /* MDCNFG: SDRAM Configuration Register
  *
@@ -359,16 +375,15 @@
  * [12]      1	 - SA1111 compatiblity mode
  * [11]      1   - latch return data with return clock
  * [10]      0   - no alternate addressing for pair 0/1
- * [09:08]   01  - tRP=2*MemClk; CL=2; tRCD=2*MemClk; tRAS=5*MemClk; tRC=8*MemClk
+ * [09:08]   01  - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
  * [7]       1   - 4 internal banks in lower partition pair
  * [06:05]   10  - 13 row address bits for partition 0/1
  * [04:03]   01  - 9 column address bits for partition 0/1
  * [02]      0   - SDRAM partition 0/1 width is 32 bit
  * [01]      0   - disable SDRAM partition 1
  * [00]      1   - enable  SDRAM partition 0
- *
- * use the configuration above but disable partition 0
  */
+/* use the configuration above but disable partition 0 */
 #define CFG_MDCNFG_VAL		0x000019c8
 
 /* MDREFR: SDRAM Refresh Control Register
@@ -434,11 +449,4 @@
 #define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
 #define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
 
-#if 0
-#define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
-                                        /* Addr of Environment Sector       */
-#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
-#endif
-
 #endif  /* __CONFIG_H */
diff --git a/include/i2c.h b/include/i2c.h
index 43d76fd..6d39080 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -51,6 +51,9 @@
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
+#ifdef CFG_I2C_INIT_BOARD
+void i2c_init_board(void);
+#endif
 
 /*
  * Probe the given I2C chip address.  Returns 0 if a chip responded,