* Patch by Jon Loeliger, 02 Sep 2004:

  Reset monitor size back to 256 so environment can be written
  to flash on MPC85xx ADS and CDS releases.

* Patch by Paolo Broggini, 02 Sep 2004:
  Make BSS clearing on ARM systems more robust

* Patch by Yue Hu and Joe, 01 Sep 2004:
  - add PCI support for ixp425;
  - add EEPRO100 suppor tfor ixdp425 board.

* Fix problem with protected sector detection in driver/cfi_flash.c

7 files changed, 326 insertions, 10 deletions

diff --git a/include/asm-arm/arch-ixp/ixp425pci.h b/include/asm-arm/arch-ixp/ixp425pci.h
new file mode 100644
index 0000000..9ea3319
--- /dev/null
+++ b/include/asm-arm/arch-ixp/ixp425pci.h
@@ -0,0 +1,312 @@
+/*
+ * IXP PCI Init
+ * (C) Copyright 2004 eslab.whut.edu.cn
+ * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IXP425PCI_H_
+#define _IXP425PCI_H_
+
+#define TRUE	1
+#define FALSE	0
+#define OK	0
+#define ERROR	-1
+#define BOOL	int
+
+#define IXP425_PCI_MAX_BAR_PER_FUNC  6
+#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC * \
+			    IXP425_PCI_MAX_FUNC_ON_BUS)
+
+enum PciBarId
+{
+	CSR_BAR=0,
+	IO_BAR,
+	SD_BAR,
+	NO_BAR
+};
+
+/*Base address register descriptor*/
+typedef struct
+{
+	unsigned int size;
+	unsigned int address;
+} PciBar;
+
+typedef struct
+{
+	unsigned int bus;
+	unsigned int device;
+	unsigned int func;
+	unsigned int irq;
+	BOOL error;
+	unsigned short vendor_id;
+	unsigned short device_id;
+	/*We need an extra entry in this array for dummy placeholder*/
+	PciBar bar[IXP425_PCI_MAX_BAR_PER_FUNC + 1];
+} PciDevice;
+
+/* Mask definitions*/
+#define IXP425_PCI_TOP_WORD_OF_LONG_MASK	0xffff0000
+#define IXP425_PCI_TOP_BYTE_OF_LONG_MASK	0xff000000
+#define IXP425_PCI_BOTTOM_WORD_OF_LONG_MASK	0x0000ffff
+#define IXP425_PCI_BOTTOM_TRIBYTES_OF_LONG_MASK 0x00ffffff
+#define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK	0x0000000f
+#define IXP425_PCI_MAX_UINT32			0xffffffff
+
+
+#define IXP425_PCI_BAR_QUERY			0xffffffff
+
+#define IXP425_PCI_BAR_MEM_BASE 0x100000
+#define IXP425_PCI_BAR_IO_BASE	0x000000
+
+/*define the maximum number of bus segments - we support a single segment*/
+#define IXP425_PCI_MAX_BUS  1
+/*define the maximum number of cards per bus segment*/
+#define IXP425_PCI_MAX_DEV  4
+/*define the maximum number of functions per device*/
+#define IXP425_PCI_MAX_FUNC 8
+/* define the maximum number of separate functions that we can
+   potentially have on the bus*/
+#define IXP425_PCI_MAX_FUNC_ON_BUS (1+ IXP425_PCI_MAX_FUNC *	\
+				    IXP425_PCI_MAX_DEV *	\
+				    IXP425_PCI_MAX_BUS)
+/*define the maximum number of BARs per function*/
+#define IXP425_PCI_MAX_BAR_PER_FUNC  6
+#define IXP425_PCI_MAX_BAR (IXP425_PCI_MAX_BAR_PER_FUNC *	\
+			    IXP425_PCI_MAX_FUNC_ON_BUS)
+
+#define PCI_NP_CBE_BESL	 (4)
+#define PCI_NP_AD_FUNCSL (8)
+
+#define REG_WRITE(b,o,v) (*(volatile unsigned int*)((b+o))=(v))
+#define REG_READ(b,o,v)	 ((v)=(*(volatile unsigned int*)((b+o))))
+
+#define PCI_DELAY	500
+#define USEC_LOOP_COUNT 533
+#define PCI_SETTLE_USEC 200
+#define PCI_MIN_RESET_ASSERT_USEC 2000
+
+/*Register addressing definitions for PCI controller configuration
+  and status registers*/
+
+#define PCI_CSR_BASE (0xC0000000)
+/*
+#define PCI_NP_AD_OFFSET       (0x00)
+#define PCI_NP_CBE_OFFSET      (0x04)
+#define PCI_NP_WDATA_OFFSET    (0x08)
+#define PCI_NP_RDATA_OFFSET    (0x0C)
+#define PCI_CRP_OFFSET	       (0x10)
+#define PCI_CRP_WDATA_OFFSET   (0x14)
+#define PCI_CRP_RDATA_OFFSET   (0x18)
+#define PCI_CSR_OFFSET	       (0x1C)
+#define PCI_ISR_OFFSET	       (0x20)
+#define PCI_INTEN_OFFSET       (0x24)
+#define PCI_DMACTRL_OFFSET     (0x28)
+#define PCI_AHBMEMBASE_OFFSET  (0x2C)
+#define PCI_AHBIOBASE_OFFSET   (0x30)
+#define PCI_PCIMEMBASE_OFFSET  (0x34)
+#define PCI_AHBDOORBELL_OFFSET (0x38)
+#define PCI_PCIDOORBELL_OFFSET (0x3C)
+#define PCI_ATPDMA0_AHBADDR    (0x40)
+#define PCI_ATPDMA0_PCIADDR    (0x44)
+#define PCI_ATPDMA0_LENADDR    (0x48)
+#define PCI_ATPDMA1_AHBADDR    (0x4C)
+#define PCI_ATPDMA1_PCIADDR    (0x50)
+#define PCI_ATPDMA1_LENADDR    (0x54)
+#define PCI_PTADMA0_AHBADDR    (0x58)
+#define PCI_PTADMA0_PCIADDR    (0x5C)
+#define PCI_PTADMA0_LENADDR    (0x60)
+#define PCI_PTADMA1_AHBADDR    (0x64)
+#define PCI_PTADMA1_PCIADDR    (0x68)
+#define PCI_PTADMA1_LENADDR    (0x6C)
+*/
+/*Non prefetch registers bit definitions*/
+/*
+#define NP_CMD_INTACK	   (0x0)
+#define NP_CMD_SPECIAL	   (0x1)
+#define NP_CMD_IOREAD	   (0x2)
+#define NP_CMD_IOWRITE	   (0x3)
+#define NP_CMD_MEMREAD	   (0x6)
+#define NP_CMD_MEMWRITE	   (0x7)
+#define NP_CMD_CONFIGREAD  (0xa)
+#define NP_CMD_CONFIGWRITE (0xb)
+*/
+
+/*define the default setting of the AHB memory base reg*/
+#define IXP425_PCI_AHBMEMBASE_DEFAULT 0x00010203
+#define IXP425_PCI_AHBIOBASE_DEFAULT  0x0
+#define IXP425_PCI_PCIMEMBASE_DEFAULT 0x0
+
+/*define the default settings for the controller's BARs*/
+#ifdef IXP425_PCI_SIMPLE_MAPPING
+#define IXP425_PCI_BAR_0_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_1_DEFAULT 0x01000000
+#define IXP425_PCI_BAR_2_DEFAULT 0x02000000
+#define IXP425_PCI_BAR_3_DEFAULT 0x03000000
+#define IXP425_PCI_BAR_4_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_5_DEFAULT 0x00000000
+#else
+#define IXP425_PCI_BAR_0_DEFAULT 0x40000000
+#define IXP425_PCI_BAR_1_DEFAULT 0x41000000
+#define IXP425_PCI_BAR_2_DEFAULT 0x42000000
+#define IXP425_PCI_BAR_3_DEFAULT 0x43000000
+#define IXP425_PCI_BAR_4_DEFAULT 0x00000000
+#define IXP425_PCI_BAR_5_DEFAULT 0x00000000
+#endif
+
+/*Configuration Port register bit definitions*/
+#define PCI_CRP_WRITE BIT(16)
+
+/*ISR (Interrupt status) Register bit definitions*/
+#define PCI_ISR_PSE   BIT(0)
+#define PCI_ISR_PFE   BIT(1)
+#define PCI_ISR_PPE   BIT(2)
+#define PCI_ISR_AHBE  BIT(3)
+#define PCI_ISR_APDC  BIT(4)
+#define PCI_ISR_PADC  BIT(5)
+#define PCI_ISR_ADB   BIT(6)
+#define PCI_ISR_PDB   BIT(7)
+
+/*INTEN (Interrupt Enable) Register bit definitions*/
+#define PCI_INTEN_PSE	BIT(0)
+#define PCI_INTEN_PFE	BIT(1)
+#define PCI_INTEN_PPE	BIT(2)
+#define PCI_INTEN_AHBE	BIT(3)
+#define PCI_INTEN_APDC	BIT(4)
+#define PCI_INTEN_PADC	BIT(5)
+#define PCI_INTEN_ADB	BIT(6)
+#define PCI_INTEN_PDB	BIT(7)
+
+/*PCI configuration regs.*/
+
+#define PCI_CFG_VENDOR_ID	0x00
+#define PCI_CFG_DEVICE_ID	0x02
+#define PCI_CFG_COMMAND		0x04
+#define PCI_CFG_STATUS		0x06
+#define PCI_CFG_REVISION	0x08
+#define PCI_CFG_PROGRAMMING_IF	0x09
+#define PCI_CFG_SUBCLASS	0x0a
+#define PCI_CFG_CLASS		0x0b
+#define PCI_CFG_CACHE_LINE_SIZE 0x0c
+#define PCI_CFG_LATENCY_TIMER	0x0d
+#define PCI_CFG_HEADER_TYPE	0x0e
+#define PCI_CFG_BIST		0x0f
+#define PCI_CFG_BASE_ADDRESS_0	0x10
+#define PCI_CFG_BASE_ADDRESS_1	0x14
+#define PCI_CFG_BASE_ADDRESS_2	0x18
+#define PCI_CFG_BASE_ADDRESS_3	0x1c
+#define PCI_CFG_BASE_ADDRESS_4	0x20
+#define PCI_CFG_BASE_ADDRESS_5	0x24
+#define PCI_CFG_CIS		0x28
+#define PCI_CFG_SUB_VENDOR_ID	0x2c
+#define PCI_CFG_SUB_SYSTEM_ID	0x2e
+#define PCI_CFG_EXPANSION_ROM	0x30
+#define PCI_CFG_RESERVED_0	0x34
+#define PCI_CFG_RESERVED_1	0x38
+#define PCI_CFG_DEV_INT_LINE	0x3c
+#define PCI_CFG_DEV_INT_PIN	0x3d
+#define PCI_CFG_MIN_GRANT	0x3e
+#define PCI_CFG_MAX_LATENCY	0x3f
+#define PCI_CFG_SPECIAL_USE	0x41
+#define PCI_CFG_MODE		0x43
+
+/*Specify the initial command we send to PCI devices*/
+#define INITIAL_PCI_CMD (PCI_CMD_IO_ENABLE	   \
+			 | PCI_CMD_MEM_ENABLE	   \
+			 | PCI_CMD_MASTER_ENABLE   \
+			 | PCI_CMD_WI_ENABLE)
+
+/*define the sub vendor and subsystem to be used */
+#define IXP425_PCI_SUB_VENDOR_SYSTEM 0x00000000
+
+#define PCI_IRQ_LINES		4
+
+#define PCI_CMD_IO_ENABLE	0x0001	/* IO access enable */
+#define PCI_CMD_MEM_ENABLE	0x0002	/* memory access enable */
+#define PCI_CMD_MASTER_ENABLE	0x0004	/* bus master enable */
+#define PCI_CMD_MON_ENABLE	0x0008	/* monitor special cycles enable */
+#define PCI_CMD_WI_ENABLE	0x0010	/* write and invalidate enable */
+#define PCI_CMD_SNOOP_ENABLE	0x0020	/* palette snoop enable */
+#define PCI_CMD_PERR_ENABLE	0x0040	/* parity error enable */
+#define PCI_CMD_WC_ENABLE	0x0080	/* wait cycle enable */
+#define PCI_CMD_SERR_ENABLE	0x0100	/* system error enable */
+#define PCI_CMD_FBTB_ENABLE	0x0200	/* fast back to back enable */
+
+
+/*CSR Register bit definitions*/
+#define PCI_CSR_HOST  BIT(0)
+#define PCI_CSR_ARBEN BIT(1)
+#define PCI_CSR_ADS   BIT(2)
+#define PCI_CSR_PDS   BIT(3)
+#define PCI_CSR_ABE   BIT(4)
+#define PCI_CSR_DBT   BIT(5)
+#define PCI_CSR_ASE   BIT(8)
+#define PCI_CSR_IC    BIT(15)
+
+/*Configuration command bit definitions*/
+#define PCI_CFG_CMD_IOAE BIT(0)
+#define PCI_CFG_CMD_MAE	 BIT(1)
+#define PCI_CFG_CMD_BME	 BIT(2)
+#define PCI_CFG_CMD_MWIE BIT(4)
+#define PCI_CFG_CMD_SER	 BIT(8)
+#define PCI_CFG_CMD_FBBE BIT(9)
+#define PCI_CFG_CMD_MDPE BIT(24)
+#define PCI_CFG_CMD_STA	 BIT(27)
+#define PCI_CFG_CMD_RTA	 BIT(28)
+#define PCI_CFG_CMD_RMA	 BIT(29)
+#define PCI_CFG_CMD_SSE	 BIT(30)
+#define PCI_CFG_CMD_DPE	 BIT(31)
+
+/*DMACTRL DMA Control and status Register*/
+#define PCI_DMACTRL_APDCEN  BIT(0)
+#define PCI_DMACTRL_APDC0   BIT(4)
+#define PCI_DMACTRL_APDE0   BIT(5)
+#define PCI_DMACTRL_APDC1   BIT(6)
+#define PCI_DMACTRL_APDE1   BIT(7)
+#define PCI_DMACTRL_PADCEN  BIT(8)
+#define PCI_DMACTRL_PADC0   BIT(12)
+#define PCI_DMACTRL_PADE0   BIT(13)
+#define PCI_DMACTRL_PADC1   BIT(14)
+#define PCI_DMACTRL_PADE1   BIT(15)
+
+/* GPIO related register */
+#undef IXP425_GPIO_GPOUTR
+#undef IXP425_GPIO_GPOER
+#undef IXP425_GPIO_GPINR
+#undef IXP425_GPIO_GPISR
+#undef IXP425_GPIO_GPIT1R
+#undef IXP425_GPIO_GPIT2R
+#undef IXP425_GPIO_GPCLKR
+
+#define IXP425_GPIO_GPOUTR	0xC8004000
+#define IXP425_GPIO_GPOER	0xC8004004
+#define IXP425_GPIO_GPINR	0xC8004008
+#define IXP425_GPIO_GPISR	0xC800400C
+#define IXP425_GPIO_GPIT1R	0xC8004010
+#define IXP425_GPIO_GPIT2R	0xC8004014
+#define IXP425_GPIO_GPCLKR	0xC8004018
+
+#define READ_GPIO_REG(addr,val) \
+		(val) = *((volatile int *)(addr));
+#define WRITE_GPIO_REG(addr,val) \
+		*((volatile int *)(addr)) = (val);
+
+#endif
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 874e962..1c11c6f 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -264,7 +264,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d4cba33..3dd4957 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -248,7 +248,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024) /* Reserve 512 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 49518d8..379a12c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -248,7 +248,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024) /* Reserve 512 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d58e6a7..7271737 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -267,7 +267,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(512 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 3f2026e..1add778 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -56,17 +56,20 @@
 
 #define CONFIG_BAUDRATE         115200
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL & ~CFG_CMD_NET)
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_ELF | CFG_CMD_PCI)
 
+#define CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 /* These are u-boot generic parameters */
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY        3
-#define CONFIG_ETHADDR          08:00:3e:26:0a:5b
-#define CONFIG_NETMASK          255.255.0.0
+/*#define CONFIG_ETHADDR          08:00:3e:26:0a:5b*/
+#define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR           192.168.0.21
-#define CONFIG_SERVERIP         192.168.0.250
+#define CONFIG_SERVERIP         192.168.0.148
 #define CONFIG_BOOTCOMMAND      "bootm 50040000"
 #define CONFIG_BOOTARGS         "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
 #define CONFIG_CMDLINE_TAG
@@ -147,7 +150,8 @@
 /*
  * SDRAM settings
  */
-#define CFG_SDR_CONFIG			0xd
+#define CFG_SDR_CONFIG		0xd
+#define CFG_SDR_MODE_CONFIG	0x1
 #define CFG_SDRAM_REFRESH_CNT 	0x81a
 
 /*
diff --git a/include/version.h b/include/version.h
index 9098055..2b9b617 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 1.1.2"
+#define	U_BOOT_VERSION	"U-Boot 1.1.3"
 
 #endif	/* __VERSION_H__ */