ENGR00121202 Add uboot support for MX53

Add uboot support for MX53

Signed-off-by:Jason Liu <r64343@freescale.com>

6 files changed, 1353 insertions, 0 deletions

diff --git a/include/asm-arm/arch-mx53/imx_spi_nor.h b/include/asm-arm/arch-mx53/imx_spi_nor.h
new file mode 100644
index 0000000..9425d59
--- /dev/null
+++ b/include/asm-arm/arch-mx53/imx_spi_nor.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IMX_SPI_NOR_H_
+#define _IMX_SPI_NOR_H_
+
+#define READ        0x03    /* tx:1 byte cmd + 3 byte addr;rx:variable bytes */
+#define READ_HS     0x0B    /* tx:1 byte cmd + 3 byte addr + 1 byte dummy; */
+#define RDSR        0x05    /* read stat reg 1 byte tx cmd + 1 byte rx status */
+#define RDSR_BUSY       (1 << 0)    /* 1=write-in-progress (default 0) */
+#define RDSR_WEL        (1 << 1)    /* 1=write enable (default 0) */
+#define RDSR_BP0        (1 << 2)    /* block write prot level (default 1) */
+#define RDSR_BP1        (1 << 3)    /* block write prot level (default 1) */
+#define RDSR_BP2        (1 << 4)    /* block write prot level (default 1) */
+#define RDSR_BP3        (1 << 5)    /* block write prot level (default 1) */
+#define RDSR_AAI        (1 << 6)    /* 1=AAI prog mode; 0=byte prog (def 0) */
+#define RDSR_BPL        (1 << 7)    /* 1=BP3,BP2,BP1,BP0 RO; 0=R/W (def 0)  */
+#define WREN        0x06    /* write enable. 1 byte tx cmd */
+#define WRDI        0x04    /* write disable. 1 byte tx cmd */
+#define EWSR        0x50    /* Enable write status. 1 byte tx cmd */
+#define WRSR        0x01    /* Write stat reg. 1 byte tx cmd + 1 byte tx val */
+#define ERASE_4K    0x20    /* sector erase. 1 byte cmd + 3 byte addr */
+#define ERASE_32K   0x52    /* 32K block erase. 1 byte cmd + 3 byte addr */
+#define ERASE_64K   0xD8    /* 64K block erase. 1 byte cmd + 3 byte addr */
+#define ERASE_CHIP  0x60    /* whole chip erase */
+#define BYTE_PROG   0x02    /* all tx: 1 cmd + 3 addr + 1 data */
+#define AAI_PROG    0xAD    /* all tx: [1 cmd + 3 addr + 2 data] + RDSR */
+				/* + [1cmd + 2 data] + .. + [WRDI] + [RDSR] */
+#define JEDEC_ID    0x9F    /* read JEDEC ID. tx: 1 byte cmd; rx: 3 byte ID */
+
+/* Atmel SPI-NOR commands */
+#define WR_2_MEM_DIR	0x82
+#define BUF1_WR		0x84
+#define BUF2_WR		0x87
+#define BUF1_TO_MEM	0x83
+#define BUF2_TO_MEM	0x86
+#define STAT_READ	0xD7
+#define STAT_PG_SZ	(1 << 0)  /* 1=Page size is 512, 0=Page size is 528 */
+#define STAT_PROT	(1 << 1)  /* 1=sector protection enabled (default 0) */
+#define STAT_COMP	(1 << 6)
+#define STAT_BUSY	(1 << 7) /* 1=Device not busy */
+#define CONFIG_REG1	0x3D
+#define CONFIG_REG2	0x2A
+#define CONFIG_REG3	0x80
+#define CONFIG_REG4	0xA6
+
+#define SZ_64K      0x10000
+#define SZ_32K      0x8000
+#define SZ_4K       0x1000
+
+#endif /* _IMX_SPI_NOR_H_ */
diff --git a/include/asm-arm/arch-mx53/iomux.h b/include/asm-arm/arch-mx53/iomux.h
new file mode 100644
index 0000000..2184863
--- /dev/null
+++ b/include/asm-arm/arch-mx53/iomux.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX53_IOMUX_H__
+#define __MACH_MX53_IOMUX_H__
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mx53.h>
+#include <asm/arch/mx53_pins.h>
+
+/*!
+ * @file mach-mx53/iomux.h
+ *
+ * @brief I/O Muxing control definitions and functions
+ *
+ * @ingroup GPIO_MX53
+ */
+
+typedef unsigned int iomux_pin_name_t;
+
+/*!
+ * various IOMUX output functions
+ */
+typedef enum iomux_config {
+	IOMUX_CONFIG_ALT0,	/*!< used as alternate function 0 */
+	IOMUX_CONFIG_ALT1,	/*!< used as alternate function 1 */
+	IOMUX_CONFIG_ALT2,	/*!< used as alternate function 2 */
+	IOMUX_CONFIG_ALT3,	/*!< used as alternate function 3 */
+	IOMUX_CONFIG_ALT4,	/*!< used as alternate function 4 */
+	IOMUX_CONFIG_ALT5,	/*!< used as alternate function 5 */
+	IOMUX_CONFIG_ALT6,	/*!< used as alternate function 6 */
+	IOMUX_CONFIG_ALT7,	/*!< used as alternate function 7 */
+	IOMUX_CONFIG_GPIO,	/*!< added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,	/*!< used as LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/*!
+ * various IOMUX pad functions
+ */
+typedef enum iomux_pad_config {
+	PAD_CTL_SRE_SLOW = 0x0 << 0,
+	PAD_CTL_SRE_FAST = 0x1 << 0,
+	PAD_CTL_DRV_LOW = 0x0 << 1,
+	PAD_CTL_DRV_MEDIUM = 0x1 << 1,
+	PAD_CTL_DRV_HIGH = 0x2 << 1,
+	PAD_CTL_DRV_MAX = 0x3 << 1,
+	PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3,
+	PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3,
+	PAD_CTL_100K_PD = 0x0 << 4,
+	PAD_CTL_47K_PU = 0x1 << 4,
+	PAD_CTL_100K_PU = 0x2 << 4,
+	PAD_CTL_22K_PU = 0x3 << 4,
+	PAD_CTL_PUE_KEEPER = 0x0 << 6,
+	PAD_CTL_PUE_PULL = 0x1 << 6,
+	PAD_CTL_PKE_NONE = 0x0 << 7,
+	PAD_CTL_PKE_ENABLE = 0x1 << 7,
+	PAD_CTL_HYS_NONE = 0x0 << 8,
+	PAD_CTL_HYS_ENABLE = 0x1 << 8,
+	PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9,
+	PAD_CTL_DDR_INPUT_DDR = 0x1 << 9,
+	PAD_CTL_DRV_VOT_LOW = 0x0 << 13,
+	PAD_CTL_DRV_VOT_HIGH = 0x1 << 13,
+} iomux_pad_config_t;
+
+/*!
+ * various IOMUX input select register index
+ */
+typedef enum iomux_input_select {
+	MUX_IN_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0,
+	MUX_IN_AUDMUX_P4_INPUT_DB_AMX_SELECT_I,
+	MUX_IN_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P5_INPUT_DA_AMX_SELECT_I,
+	MUX_IN_AUDMUX_P5_INPUT_DB_AMX_SELECT_I,
+	MUX_IN_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT,
+	MUX_IN_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT,
+	MUX_IN_CAN1_IPP_IND_CANRX_SELECT_INPUT,		/*0x760*/
+	MUX_IN_CAN2_IPP_IND_CANRX_SELECT_INPUT,
+	MUX_IN_CCM_IPP_ASRC_EXT_SELECT_INPUT,
+	MUX_IN_CCM_IPP_DI1_CLK_SELECT_INPUT,
+	MUX_IN_CCM_PLL1_BYPASS_CLK_SELECT_INPUT,
+	MUX_IN_CCM_PLL2_BYPASS_CLK_SELECT_INPUT,
+	MUX_IN_CCM_PLL3_BYPASS_CLK_SELECT_INPUT,
+	MUX_IN_CCM_PLL4_BYPASS_CLK_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT,	/*0x780*/
+	MUX_IN_CSPI_IPP_IND_MISO_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_IND_MOSI_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_IND_SS_B_1_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_IND_SS_B_2_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_IND_SS_B_3_SELECT_INPUT,
+	MUX_IN_CSPI_IPP_IND_SS_B_4_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_IND_MISO_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_IND_MOSI_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT,
+	MUX_IN_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT,	/*0x7B0*/
+	MUX_IN_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT,
+	MUX_IN_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT,
+	MUX_IN_ECSPI2_IPP_IND_MISO_SELECT_INPUT,
+	MUX_IN_ECSPI2_IPP_IND_MOSI_SELECT_INPUT,
+	MUX_IN_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT,
+	MUX_IN_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_FSR_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_FST_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_HCKR_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_HCKT_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SCKR_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SCKT_SELECT_INPUT,		/*0x7E0*/
+	MUX_IN_ESAI1_IPP_IND_SDO0_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SDO1_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT,
+	MUX_IN_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT,
+	MUX_IN_ESDHC1_IPP_WP_ON_SELECT_INPUT,
+	MUX_IN_FEC_FEC_COL_SELECT_INPUT,	/*0x800*/
+	MUX_IN_FEC_FEC_MDI_SELECT_INPUT,
+	MUX_IN_FEC_FEC_RX_CLK_SELECT_INPUT,
+	MUX_IN_FIRI_IPP_IND_RXD_SELECT_INPUT,
+	MUX_IN_GPC_PMIC_RDY_SELECT_INPUT,
+	MUX_IN_I2C1_IPP_SCL_IN_SELECT_INPUT,
+	MUX_IN_I2C1_IPP_SDA_IN_SELECT_INPUT,
+	MUX_IN_I2C2_IPP_SCL_IN_SELECT_INPUT,
+	MUX_IN_I2C2_IPP_SDA_IN_SELECT_INPUT,
+	MUX_IN_I2C3_IPP_SCL_IN_SELECT_INPUT,
+	MUX_IN_I2C3_IPP_SDA_IN_SELECT_INPUT,
+	MUX_IN_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT,
+	MUX_IN_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT,
+	MUX_IN_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT,
+	MUX_IN_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT,
+	MUX_IN_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT,
+	MUX_IN_KPP_IPP_IND_COL_5_SELECT_INPUT,	/*0x840*/
+	MUX_IN_KPP_IPP_IND_COL_6_SELECT_INPUT,
+	MUX_IN_KPP_IPP_IND_COL_7_SELECT_INPUT,
+	MUX_IN_KPP_IPP_IND_ROW_5_SELECT_INPUT,
+	MUX_IN_KPP_IPP_IND_ROW_6_SELECT_INPUT,
+	MUX_IN_KPP_IPP_IND_ROW_7_SELECT_INPUT,
+	MUX_IN_MLB_MLBCLK_IN_SELECT_INPUT,
+	MUX_IN_MLB_MLBDAT_IN_SELECT_INPUT,
+	MUX_IN_MLB_MLBSIG_IN_SELECT_INPUT,
+	MUX_IN_OWIRE_BATTERY_LINE_IN_SELECT_INPUT,
+	MUX_IN_SDMA_EVENTS_14_SELECT_INPUT,
+	MUX_IN_SDMA_EVENTS_15_SELECT_INPUT,
+	MUX_IN_SPDIF_SPDIF_IN1_SELECT_INPUT,	/*0x870*/
+	MUX_IN_UART1_IPP_UART_RTS_B_SELECT_INPUT,
+	MUX_IN_UART1_IPP_UART_RXD_MUX_SELECT_INPUT,
+	MUX_IN_UART2_IPP_UART_RTS_B_SELECT_INPUT,
+	MUX_IN_UART2_IPP_UART_RXD_MUX_SELECT_INPUT,
+	MUX_IN_UART3_IPP_UART_RTS_B_SELECT_INPUT,
+	MUX_IN_UART3_IPP_UART_RXD_MUX_SELECT_INPUT,
+	MUX_IN_UART4_IPP_UART_RTS_B_SELECT_INPUT,
+	MUX_IN_UART4_IPP_UART_RXD_MUX_SELECT_INPUT,
+	MUX_IN_UART5_IPP_UART_RTS_B_SELECT_INPUT,
+	MUX_IN_UART5_IPP_UART_RXD_MUX_SELECT_INPUT,
+	MUX_IN_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT,
+	MUX_IN_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT,
+	MUX_IN_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT,
+} iomux_input_select_t;
+
+/*!
+ * various IOMUX input functions
+ */
+typedef enum iomux_input_config {
+	INPUT_CTL_PATH0 = 0x0,
+	INPUT_CTL_PATH1,
+	INPUT_CTL_PATH2,
+	INPUT_CTL_PATH3,
+	INPUT_CTL_PATH4,
+	INPUT_CTL_PATH5,
+	INPUT_CTL_PATH6,
+	INPUT_CTL_PATH7,
+} iomux_input_config_t;
+
+struct mxc_iomux_pin_cfg {
+	iomux_pin_name_t pin;
+	u8 mux_mode;
+	u16 pad_cfg;
+	u8 in_select;
+	u8 in_mode;
+};
+
+/*!
+ * Request ownership for an IO pin. This function has to be the first one
+ * being called before that pin is used. The caller has to check the
+ * return value to make sure it returns 0.
+ *
+ * @param  pin		a name defined by \b iomux_pin_name_t
+ * @param  config	config as defined in \b #iomux_pin_ocfg_t
+ *
+ * @return		0 if successful; Non-zero otherwise
+ */
+int mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config);
+
+/*!
+ * Release ownership for an IO pin
+ *
+ * @param  pin		a name defined by \b iomux_pin_name_t
+ * @param  config	config as defined in \b #iomux_pin_ocfg_t
+ */
+void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config);
+
+/*!
+ * This function configures the pad value for a IOMUX pin.
+ *
+ * @param  pin          a pin number as defined in \b #iomux_pin_name_t
+ * @param  config      the ORed value of elements defined in
+ *                             \b #iomux_pad_config_t
+ */
+void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config);
+
+/*!
+ * This function gets the current pad value for a IOMUX pin.
+ *
+ * @param  pin          a pin number as defined in \b #iomux_pin_name_t
+ * @return		current pad value
+ */
+unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin);
+
+/*!
+ * This function configures input path.
+ *
+ * @param  input        index of input select register as defined in
+ *                              \b #iomux_input_select_t
+ * @param  config       the binary value of elements defined in \b #iomux_input_config_t
+ */
+void mxc_iomux_set_input(iomux_input_select_t input, u32 config);
+
+#endif				/*  __MACH_MX53_IOMUX_H__ */
diff --git a/include/asm-arm/arch-mx53/mx53.h b/include/asm-arm/arch-mx53/mx53.h
new file mode 100644
index 0000000..e985357
--- /dev/null
+++ b/include/asm-arm/arch-mx53/mx53.h
@@ -0,0 +1,422 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX53_H__
+#define __ASM_ARCH_MXC_MX53_H__
+
+#define __REG(x)        (*((volatile u32 *)(x)))
+#define __REG16(x)      (*((volatile u16 *)(x)))
+#define __REG8(x)       (*((volatile u8 *)(x)))
+
+ /*
+ * IRAM
+ */
+#define IRAM_BASE_ADDR		0xF8000000	/* internal ram */
+#define IRAM_PARTITIONS		16
+#define IRAM_SIZE		(IRAM_PARTITIONS*SZ_8K)	/* 128KB */
+
+/*
+ * NFC
+ */
+#define NFC_BASE_ADDR_AXI		0xF7FF0000	/* NAND flash AXI */
+#define NFC_AXI_SIZE		SZ_64K
+
+#define TZIC_BASE_ADDR		0x0FFFC000
+
+#define DEBUG_BASE_ADDR	0x40000000
+#define ETB_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00001000)
+#define ETM_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00002000)
+#define TPIU_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00003000)
+#define CTI0_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00004000)
+#define CTI1_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00005000)
+#define CTI2_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00006000)
+#define CTI3_BASE_ADDR		(DEBUG_BASE_ADDR + 0x00007000)
+#define CORTEX_DBG_BASE_ADDR	(DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+
+#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
+#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI1_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define ESAI_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
+#define MMC_SDHC3_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MMC_SDHC4_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00024000)
+#define SPDIF_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00028000)
+#define ASRC_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0002C000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00030000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*!
+ * defines for SPBA modules
+ */
+#define SPBA_SDHC1	0x04
+#define SPBA_SDHC2	0x08
+#define SPBA_UART3	0x0C
+#define SPBA_CSPI1	0x10
+#define SPBA_SSI2	0x14
+#define SPBA_ESAI	0x18
+#define SPBA_SDHC3	0x20
+#define SPBA_SDHC4	0x24
+#define SPBA_SPDIF	0x28
+#define SPBA_ASRC	0x2C
+#define SPBA_ATA	0x30
+#define SPBA_CTRL	0x3C
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR 	0x53F00000
+
+#define OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00080000)
+#define GPIO1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00084000)
+#define GPIO2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
+#define GPIO3_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0008C000)
+#define GPIO4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00090000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00094000)
+#define WDOG1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00098000)
+#define WDOG2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0009C000)
+#define GPT1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define SRTC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A4000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000A8000)
+#define EPIT1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define EPIT2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B0000)
+#define PWM1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B4000)
+#define PWM2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define UART1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000C0000)
+#define CAN1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000C8000)
+#define CAN2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000CC000)
+#define SRC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D0000)
+#define CCM_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D4000)
+#define GPC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D8000)
+#define GPIO5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000DC000)
+#define GPIO6_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000E0000)
+#define GPIO7_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000E4000)
+#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000E8000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000EC000)
+#define UART4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000F0000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR	0x63F00000
+
+#define PLL1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define PLL2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
+#define PLL3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00088000)
+#define PLL4_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
+#define UART5_BASE_ADDR	(AIPS2_BASE_ADDR + 0x00090000)
+#define AHBMAX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x00094000)
+#define IIM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define CSU_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0009C000)
+#define ARM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A0000)
+#define OWIRE_BASE_ADDR 	(AIPS2_BASE_ADDR + 0x000A4000)
+#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A8000)
+#define CSPI2_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000AC000)
+#define SDMA_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000B0000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B4000)
+#define ROMCP_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000B8000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000BC000)
+#define CSPI3_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define I2C2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000C4000)
+#define I2C1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000C8000)
+#define SSI1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000D0000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define M4IF_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define ESDCTL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000D9000)
+#define WEIM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DA000)
+#define NFC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DB000)
+#define EMI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DBF00)
+#define MLB_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E4000)
+#define SSI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E8000)
+#define FEC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define TVE_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000F0000)
+#define VPU_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000F4000)
+#define SAHARA_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000F8000)
+#define PTP_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000FC000)
+
+/*
+ * Memory regions and CS
+ */
+#define CSD0_BASE_ADDR		0x70000000
+#define CSD1_BASE_ADDR		0xB0000000
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_BASE		0
+#define MXC_INT_RESV0		0
+#define MXC_INT_MMC_SDHC1	1
+#define MXC_INT_MMC_SDHC2	2
+#define MXC_INT_MMC_SDHC3	3
+#define MXC_INT_MMC_SDHC4	4
+#define MXC_INT_DAP		5
+#define MXC_INT_SDMA		6
+#define MXC_INT_IOMUX		7
+#define MXC_INT_NFC		8
+#define MXC_INT_VPU		9
+#define MXC_INT_IPU_ERR	10
+#define MXC_INT_IPU_SYN	11
+#define MXC_INT_GPU		12
+#define MXC_INT_UART4		13
+#define MXC_INT_USB_H1		14
+#define MXC_INT_EMI		15
+#define MXC_INT_USB_H2		16
+#define MXC_INT_USB_H3		17
+#define MXC_INT_USB_OTG	18
+#define MXC_INT_SAHARA_H0	19
+#define MXC_INT_SAHARA_H1	20
+#define MXC_INT_SCC_SMN	21
+#define MXC_INT_SCC_STZ	22
+#define MXC_INT_SCC_SCM	23
+#define MXC_INT_SRTC_NTZ	24
+#define MXC_INT_SRTC_TZ	25
+#define MXC_INT_RTIC		26
+#define MXC_INT_CSU		27
+#define MXC_INT_SATA		28
+#define MXC_INT_SSI1		29
+#define MXC_INT_SSI2		30
+#define MXC_INT_UART1		31
+#define MXC_INT_UART2		32
+#define MXC_INT_UART3		33
+#define MXC_INT_RTC			34
+#define MXC_INT_PTP		35
+#define MXC_INT_CSPI1		36
+#define MXC_INT_CSPI2		37
+#define MXC_INT_CSPI		38
+#define MXC_INT_GPT		39
+#define MXC_INT_EPIT1		40
+#define MXC_INT_EPIT2		41
+#define MXC_INT_GPIO1_INT7	42
+#define MXC_INT_GPIO1_INT6	43
+#define MXC_INT_GPIO1_INT5	44
+#define MXC_INT_GPIO1_INT4	45
+#define MXC_INT_GPIO1_INT3	46
+#define MXC_INT_GPIO1_INT2	47
+#define MXC_INT_GPIO1_INT1	48
+#define MXC_INT_GPIO1_INT0	49
+#define MXC_INT_GPIO1_LOW	50
+#define MXC_INT_GPIO1_HIGH	51
+#define MXC_INT_GPIO2_LOW	52
+#define MXC_INT_GPIO2_HIGH	53
+#define MXC_INT_GPIO3_LOW	54
+#define MXC_INT_GPIO3_HIGH	55
+#define MXC_INT_GPIO4_LOW	56
+#define MXC_INT_GPIO4_HIGH	57
+#define MXC_INT_WDOG1		58
+#define MXC_INT_WDOG2		59
+#define MXC_INT_KPP		60
+#define MXC_INT_PWM1		61
+#define MXC_INT_I2C1		62
+#define MXC_INT_I2C2		63
+#define MXC_INT_I2C3		64
+#define MXC_INT_MLB		65
+#define MXC_INT_ASRC		66
+#define MXC_INT_SPDIF		67
+#define MXC_INT_RESV1		68
+#define MXC_INT_IIM		69
+#define MXC_INT_ATA		70
+#define MXC_INT_CCM1		71
+#define MXC_INT_CCM2		72
+#define MXC_INT_GPC1		73
+#define MXC_INT_GPC2		74
+#define MXC_INT_SRC		75
+#define MXC_INT_NM		76
+#define MXC_INT_PMU		77
+#define MXC_INT_CTI_IRQ		78
+#define MXC_INT_CTI1_TG0	79
+#define MXC_INT_CTI1_TG1	80
+#define MXC_INT_ESAI		81
+#define MXC_INT_CAN1		82
+#define MXC_INT_CAN2		83
+#define MXC_INT_GPU2_IRQ	84
+#define MXC_INT_GPU2_BUSY	85
+#define MXC_INT_UART5		86
+#define MXC_INT_FEC		87
+#define MXC_INT_OWIRE		88
+#define MXC_INT_CTI1_TG2	89
+#define MXC_INT_SJC		90
+#define MXC_INT_RESV2		91
+#define MXC_INT_TVE		92
+#define MXC_INT_FIRI		93
+#define MXC_INT_PWM2		94
+#define MXC_INT_RESV3		95
+#define MXC_INT_SSI3		96
+#define MXC_INT_RESV4		97
+#define MXC_INT_CTI1_TG3	98
+#define MXC_INT_RESV5		99
+#define MXC_INT_VPU_IDLE	100
+#define MXC_INT_EMI_NFC	101
+#define MXC_INT_GPU_IDLE	102
+#define MXC_INT_GPIO5_LOW	103
+#define MXC_INT_GPIO5_HIGH	104
+#define MXC_INT_GPIO6_LOW	105
+#define MXC_INT_GPIO6_HIGH	106
+#define MXC_INT_GPIO7_LOW	107
+#define MXC_INT_GPIO7_HIGH	108
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR                 0x00
+#define GPIO_GDIR               0x04
+#define GPIO_PSR                0x08
+#define GPIO_ICR1               0x0C
+#define GPIO_ICR2               0x10
+#define GPIO_IMR                0x14
+#define GPIO_ISR                0x18
+#define GPIO_INT_LOW_LEV        0x0
+#define GPIO_INT_HIGH_LEV       0x1
+#define GPIO_INT_RISE_EDGE      0x2
+#define GPIO_INT_FALL_EDGE      0x3
+#define GPIO_INT_NONE           0x4
+
+#define CLKCTL_CCR              0x00
+#define	CLKCTL_CCDR             0x04
+#define CLKCTL_CSR              0x08
+#define CLKCTL_CCSR             0x0C
+#define CLKCTL_CACRR            0x10
+#define CLKCTL_CBCDR            0x14
+#define CLKCTL_CBCMR            0x18
+#define CLKCTL_CSCMR1           0x1C
+#define CLKCTL_CSCMR2           0x20
+#define CLKCTL_CSCDR1           0x24
+#define CLKCTL_CS1CDR           0x28
+#define CLKCTL_CS2CDR           0x2C
+#define CLKCTL_CDCDR            0x30
+#define CLKCTL_CHSCDR           0x34
+#define CLKCTL_CSCDR2           0x38
+#define CLKCTL_CSCDR3           0x3C
+#define CLKCTL_CSCDR4           0x40
+#define CLKCTL_CWDR             0x44
+#define CLKCTL_CDHIPR           0x48
+#define CLKCTL_CDCR             0x4C
+#define CLKCTL_CTOR             0x50
+#define CLKCTL_CLPCR            0x54
+#define CLKCTL_CISR             0x58
+#define CLKCTL_CIMR             0x5C
+#define CLKCTL_CCOSR            0x60
+#define CLKCTL_CGPR             0x64
+#define CLKCTL_CCGR0            0x68
+#define CLKCTL_CCGR1            0x6C
+#define CLKCTL_CCGR2            0x70
+#define CLKCTL_CCGR3            0x74
+#define CLKCTL_CCGR4            0x78
+#define CLKCTL_CCGR5            0x7C
+#define CLKCTL_CCGR6            0x80
+#define CLKCTL_CCGR7            0x84
+#define CLKCTL_CMEOR            0x88
+
+#define CHIP_REV_1_0            0x10
+#define PLATFORM_ICGC           0x14
+
+/* Assuming 24MHz input clock with doubler ON */
+/*                            MFI         PDF */
+#define DP_OP_850       ((8 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_850      (48 - 1)
+#define DP_MFN_850      41
+
+#define DP_OP_800       ((8 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_800      (3 - 1)
+#define DP_MFN_800      1
+
+#define DP_OP_700       ((7 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_700      (24 - 1)
+#define DP_MFN_700      7
+
+#define DP_OP_600       ((6 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_600      (4 - 1)
+#define DP_MFN_600      1
+
+#define DP_OP_665       ((6 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_665      (96 - 1)
+#define DP_MFN_665      89
+
+#define DP_OP_532       ((5 << 4) + ((1 - 1)  << 0))
+#define DP_MFD_532      (24 - 1)
+#define DP_MFN_532      13
+
+#define DP_OP_400       ((8 << 4) + ((2 - 1)  << 0))
+#define DP_MFD_400      (3 - 1)
+#define DP_MFN_400      1
+
+#define DP_OP_216       ((6 << 4) + ((3 - 1)  << 0))
+#define DP_MFD_216      (4 - 1)
+#define DP_MFN_216      3
+
+#define PLL_DP_CTL      0x00
+#define PLL_DP_CONFIG   0x04
+#define PLL_DP_OP       0x08
+#define PLL_DP_MFD      0x0C
+#define PLL_DP_MFN      0x10
+#define PLL_DP_MFNMINUS 0x14
+#define PLL_DP_MFNPLUS  0x18
+#define PLL_DP_HFS_OP   0x1C
+#define PLL_DP_HFS_MFD  0x20
+#define PLL_DP_HFS_MFN  0x24
+#define PLL_DP_TOGC     0x28
+#define PLL_DP_DESTAT   0x2C
+
+#ifndef __ASSEMBLER__
+
+enum boot_device {
+	UNKNOWN_BOOT,
+	NAND_BOOT,
+	SPI_NOR_BOOT,
+	MMC_BOOT,
+};
+
+enum mxc_clock {
+	MXC_ARM_CLK = 0,
+	MXC_AHB_CLK,
+	MXC_IPG_CLK,
+	MXC_IPG_PERCLK,
+	MXC_UART_CLK,
+	MXC_CSPI_CLK,
+	MXC_AXI_A_CLK,
+	MXC_AXI_B_CLK,
+	MXC_EMI_SLOW_CLK,
+	MXC_DDR_CLK,
+	MXC_ESDHC_CLK,
+};
+
+enum mxc_peri_clocks {
+	MXC_UART1_BAUD,
+	MXC_UART2_BAUD,
+	MXC_UART3_BAUD,
+	MXC_SSI1_BAUD,
+	MXC_SSI2_BAUD,
+	MXC_CSI_BAUD,
+	MXC_MSTICK1_CLK,
+	MXC_MSTICK2_CLK,
+	MXC_SPI1_CLK,
+	MXC_SPI2_CLK,
+};
+
+extern unsigned int mxc_get_clock(enum mxc_clock clk);
+extern unsigned int get_board_rev(void);
+extern int is_soc_rev(int rev);
+extern enum boot_device get_boot_device(void);
+
+#endif /* __ASSEMBLER__*/
+
+#endif				/*  __ASM_ARCH_MXC_MX53_H__ */
diff --git a/include/asm-arm/arch-mx53/mx53_pins.h b/include/asm-arm/arch-mx53/mx53_pins.h
new file mode 100644
index 0000000..e5afcd7
--- /dev/null
+++ b/include/asm-arm/arch-mx53/mx53_pins.h
@@ -0,0 +1,374 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARCH_MXC_MX53_PINS_H__
+#define __ASM_ARCH_MXC_MX53_PINS_H__
+
+/*!
+ * @file arch-mxc/mx53_pins.h
+ *
+ * @brief MX53 I/O Pin List
+ *
+ * @ingroup GPIO_MX53
+ */
+
+#ifndef __ASSEMBLY__
+
+/*!
+ * @name IOMUX/PAD Bit field definitions
+ */
+
+/*! @{ */
+
+/*!
+ * In order to identify pins more effectively, each mux-controlled pin's
+ * enumerated value is constructed in the following way:
+ *
+ * -------------------------------------------------------------------
+ * 31-29 | 28 - 24 |  23 - 21 | 20  - 10| 9 - 0
+ * -------------------------------------------------------------------
+ * IO_P  |  IO_I  | GPIO_I | PAD_I  | MUX_I
+ * -------------------------------------------------------------------
+ *
+ * Bit 0 to 9 contains MUX_I used to identify the register
+ * offset (0-based. base is IOMUX_module_base) defined in the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The
+ * similar field definitions are used for the pad control register.
+ * For example, the MX53_PIN_GPIO_19 is defined in the enumeration:
+ *    ( (0x20 - MUX_I_START) << MUX_I)|( (0x348 - PAD_I_START) << PAD_I)
+ * It means the mux control register is at register offset 0x20. The pad control
+ * register offset is: 0x348 and also occupy the least significant bits
+ * within the register.
+ */
+
+/*!
+ * Starting bit position within each entry of \b iomux_pins to represent the
+ * MUX control register offset
+ */
+#define MUX_I			0
+/*!
+ * Starting bit position within each entry of \b iomux_pins to represent the
+ * PAD control register offset
+ */
+#define PAD_I			10
+/*!
+ * Starting bit position within each entry of \b iomux_pins to represent which
+ * mux mode is for GPIO (0-based)
+ */
+#define GPIO_I			21
+
+#define MUX_IO_P                29
+#define MUX_IO_I                24
+
+#define NON_GPIO_PORT		0x7
+#define PIN_TO_MUX_MASK		((1 << (PAD_I - MUX_I)) - 1)
+#define PIN_TO_PAD_MASK		((1 << (GPIO_I - PAD_I)) - 1)
+#define PIN_TO_ALT_GPIO_MASK		((1 << (MUX_IO_I - GPIO_I)) - 1)
+
+#define NON_MUX_I		PIN_TO_MUX_MASK
+#define NON_PAD_I		PIN_TO_PAD_MASK
+#define MUX_I_START		0x0020
+#define PAD_I_START		0x348
+#define INPUT_CTL_START		0x730
+#define MUX_I_END		(PAD_I_START - 4)
+
+#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \
+	(((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \
+	((mi) << MUX_I) | \
+	((pi - PAD_I_START) << PAD_I) | \
+	((ga) << GPIO_I))
+
+#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \
+    _MXC_BUILD_PIN(gp, gi, ga, mi, pi)
+
+#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \
+    _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi)
+
+#define PIN_TO_IOMUX_MUX(pin)	((pin >> MUX_I) & PIN_TO_MUX_MASK)
+#define PIN_TO_IOMUX_PAD(pin)	((pin >> PAD_I) & PIN_TO_PAD_MASK)
+#define PIN_TO_ALT_GPIO(pin)	((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK)
+#define PIN_TO_IOMUX_INDEX(pin)	(PIN_TO_IOMUX_MUX(pin) >> 2)
+
+/*! @} End IOMUX/PAD Bit field definitions */
+
+/*!
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX53 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+enum iomux_pins {
+	MX53_PIN_GPIO_19  = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348),
+	MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C),
+	MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350),
+	MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354),
+	MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358),
+	MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C),
+	MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360),
+	MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364),
+	MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368),
+	MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C),
+	MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370),
+	MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374),
+	MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378),
+	MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C),
+	MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380),
+	MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384),
+	MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388),
+	MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C),
+	MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390),
+	MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394),
+	MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398),
+	MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C),
+	MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0),
+	MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4),
+	MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8),
+	MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC),
+	MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0),
+	MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4),
+	MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8),
+	MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC),
+	MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0),
+	MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4),
+	MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8),
+	MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC),
+	MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0),
+	MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4),
+	MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8),
+	MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC),
+	MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0),
+	MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4),
+	MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8),
+	MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC),
+	MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0),
+	MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4),
+	MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8),
+	MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC),
+	MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400),
+	MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404),
+	MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408),
+	MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C),
+	MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410),
+	MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414),
+	MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418),
+	MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C),
+	MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420),
+	MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424),
+	MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428),
+	MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C),
+	MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430),
+	MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434),
+	MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438),
+	MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C),
+	MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440),
+	MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444),
+	MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448),
+	MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C),
+	MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450),
+	MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454),
+	MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458),
+	MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C),
+	MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460),
+	MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464),
+	MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468),
+	MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C),
+	MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470),
+	MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474),
+	MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478),
+	MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C),
+	MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480),
+	MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484),
+	MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488),
+	MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C),
+	MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490),
+	MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494),
+	MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498),
+	MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C),
+	MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0),
+	MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4),
+	MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8),
+	MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC),
+	MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0),
+	MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4),
+	MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8),
+	MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC),
+	MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0),
+	MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4),
+	MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8),
+	MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC),
+	MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0),
+	MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4),
+	MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8),
+	MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC),
+	MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0),
+	MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4),
+	MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8),
+	MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC),
+	MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0),
+	MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4),
+	MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8),
+	MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC),
+	MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500),
+	MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504),
+	MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508),
+	MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C),
+	MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510),
+	MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514),
+	MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518),
+	MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C),
+	MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520),
+	MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524),
+	MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528),
+	MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C),
+	MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530),
+	MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534),
+	MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538),
+	MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C),
+	MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I),
+	MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I),
+	MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I),
+	MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I),
+	MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I),
+	MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I),
+	MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I),
+	MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I),
+	MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I),
+	MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I),
+	MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540),
+	MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544),
+	MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548),
+	MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C),
+	MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550),
+	MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554),
+	MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558),
+	MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C),
+	MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560),
+	MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564),
+	MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568),
+	MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C),
+	MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570),
+	MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574),
+	MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578),
+	MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C),
+	MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580),
+	MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584),
+	MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588),
+	MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C),
+	MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590),
+	MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594),
+	MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598),
+	MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C),
+	MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0),
+	MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4),
+	MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8),
+	MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC),
+	MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0),
+	MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4),
+	MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8),
+	MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC),
+	MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0),
+	MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4),
+	MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8),
+	MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC),
+	MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0),
+	MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4),
+	MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8),
+	MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC),
+	MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0),
+	MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4),
+	MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8),
+	MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC),
+	MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0),
+	MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4),
+	MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8),
+	MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC),
+	MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600),
+	MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604),
+	MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608),
+	MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C),
+	MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610),
+	MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614),
+	MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618),
+	MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C),
+	MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620),
+	MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624),
+	MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628),
+	MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C),
+	MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630),
+	MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634),
+	MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638),
+	MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C),
+	MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640),
+	MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644),
+	MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648),
+	MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C),
+	MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650),
+	MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654),
+	MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658),
+	MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C),
+	MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660),
+	MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664),
+	MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668),
+	MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C),
+	MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670),
+	MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674),
+	MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678),
+	MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C),
+	MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680),
+	MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684),
+	MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688),
+	MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C),
+	MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690),
+	MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694),
+	MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698),
+	MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C),
+	MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0),
+	MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4),
+	MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8),
+	MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC),
+	MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0),
+	MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4),
+	MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8),
+	MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC),
+	MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0),
+	MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4),
+	MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8),
+	MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC),
+	MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0),
+	MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4),
+	MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8),
+	MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC),
+	MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0),
+	MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4),
+	MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8),
+	MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC),
+	MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0),
+	MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4),
+	MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC),
+	MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708),
+	MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C),
+	MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710),
+	MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714),
+	MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718),
+	MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C),
+	MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720),
+	MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724),
+	MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728),
+	MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C),
+};
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* __ASM_ARCH_MXC_MX53_PINS_H__ */
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index 5293d67..dc3ec1a 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -2241,6 +2241,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_OMAP3_WL_FF          2258
 #define MACH_TYPE_SIMCOM               2259
 #define MACH_TYPE_MCWEBIO              2260
+#define MACH_TYPE_MX53_EVK             2716
 
 #ifdef CONFIG_ARCH_EBSA110
 # ifdef machine_arch_type
@@ -27406,6 +27407,18 @@ extern unsigned int __machine_arch_type;
 # define machine_is_mx51_babbage()	(0)
 #endif
 
+#ifdef CONFIG_MACH_MX53_EVK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type     __machine_arch_type
+# else
+#  define machine_arch_type     MACH_TYPE_MX53_EVK
+# endif
+# define machine_is_mx53_evk()      (machine_arch_type == MACH_TYPE_MX53_EVK)
+#else
+# define machine_is_mx53_evk()      (0)
+#endif
+
 #ifdef CONFIG_MACH_S3C2440TURKIYE
 # ifdef machine_arch_type
 #  undef machine_arch_type
diff --git a/include/configs/mx53_evk.h b/include/configs/mx53_evk.h
new file mode 100644
index 0000000..010ac76
--- /dev/null
+++ b/include/configs/mx53_evk.h
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-EVK Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx53.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARMV7		/* This is armv7 Cortex-A8 CPU core */
+#define CONFIG_SYS_APCS_GNU
+
+#define CONFIG_MXC
+#define CONFIG_MX53
+#define CONFIG_MX53_EVK
+#define CONFIG_FLASH_HEADER
+#define CONFIG_FLASH_HEADER_OFFSET 0x400
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+#define CONFIG_MX53_HCLK_FREQ	24000000	/* RedBoot says 26MHz */
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MX53_UART	1
+#define CONFIG_MX53_UART1	1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT  100
+#define CONFIG_NET_MULTI 1
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_ENV
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_PRIME	"FEC0"
+
+#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
+#define CONFIG_RD_LOADADDR	(CONFIG_LOADADDR + 0x300000)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+		"netdev=eth0\0"						\
+		"ethprime=FEC0\0"					\
+		"uboot=u-boot.bin\0"			\
+		"kernel=uImage\0"				\
+		"nfsroot=/opt/eldk/arm\0"				\
+		"bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+		"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+			"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+		"bootcmd_net=run bootargs_base bootargs_nfs; "		\
+			"tftpboot ${loadaddr} ${kernel}; bootm\0"	\
+		"bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp "     \
+			"root=/dev/mmcblk0p2 rootwait\0"                \
+		"bootcmd_mmc=run bootargs_base bootargs_mmc; bootm\0"   \
+		"bootcmd=run bootcmd_net\0"                             \
+
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"EVK U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_FEC0_IOBASE	FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	-1
+#define CONFIG_FEC0_MIIBASE 	-1
+
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+/*
+ * I2C Configs
+ */
+#define CONFIG_CMD_I2C          1
+#define CONFIG_HARD_I2C         1
+#define CONFIG_I2C_MXC          1
+#define CONFIG_SYS_I2C_PORT             I2C2_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED            100000
+#define CONFIG_SYS_I2C_SLAVE            0xfe
+
+
+/*
+ * SPI Configs
+ */
+#define CONFIG_FSL_SF		1
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_IMX_ATMEL	1
+#define CONFIG_SPI_FLASH_CS	1
+#define CONFIG_IMX_ECSPI
+#define IMX_CSPI_VER_2_3        1
+#define MAX_SPI_BYTES		(64 * 4)
+
+/*
+ * MMC Configs
+ */
+#ifdef CONFIG_CMD_MMC
+	#define CONFIG_MMC				1
+	#define CONFIG_GENERIC_MMC
+	#define CONFIG_IMX_MMC
+	#define CONFIG_DOS_PARTITION	1
+	#define CONFIG_CMD_FAT		1
+	#define CONFIG_CMD_EXT2		1
+#endif
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(1024 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/* Monitor at beginning of flash */
+#define CONFIG_FSL_ENV_IN_MMC
+
+#define CONFIG_ENV_SECT_SIZE    (128 * 1024)
+#define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
+
+#if defined(CONFIG_FSL_ENV_IN_NAND)
+	#define CONFIG_ENV_IS_IN_NAND 1
+	#define CONFIG_ENV_OFFSET	0x100000
+#elif defined(CONFIG_FSL_ENV_IN_MMC)
+	#define CONFIG_ENV_IS_IN_MMC	1
+	#define CONFIG_ENV_OFFSET	(768 * 1024)
+#elif defined(CONFIG_FSL_ENV_IN_SF)
+	#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+	#define CONFIG_ENV_SPI_CS		1
+	#define CONFIG_ENV_OFFSET       (768 * 1024)
+#else
+	#define CONFIG_ENV_IS_NOWHERE	1
+#endif
+#endif				/* __CONFIG_H */