ENGR00123551: Add mx25 splash screen support

Add mx25 splash screen support.

Signed-off-by: Terry Lv <r65388@freescale.com>
Signed-off-by: Renato Frias <renato.frias@freescale.com>
Signed-off-by: Terry Lv <r65388@freescale.com>

3 files changed, 100 insertions, 1 deletions

diff --git a/include/configs/mx25_3stack.h b/include/configs/mx25_3stack.h
index fde7b12..9a6391c 100644
--- a/include/configs/mx25_3stack.h
+++ b/include/configs/mx25_3stack.h
@@ -105,6 +105,7 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_MXC_NAND
 
+
 /*
  * MMC Configs
  * */
@@ -141,7 +142,8 @@
 	"bootcmd=run bootcmd_net\0"					\
 	"bootcmd_net=run bootargs_base bootargs_nfs; "			\
 		"tftpboot ${loadaddr} ${kernel}; bootm\0"		\
-	"load_uboot=tftpboot ${loadaddr} ${uboot}\0"
+	"load_uboot=tftpboot ${loadaddr} ${uboot}\0"	\
+	"splashimage=0x80800000\0"
 
 /*Support LAN9217*/
 #define CONFIG_SMC911X
@@ -211,6 +213,34 @@
 #define PHYS_SDRAM_1_SIZE       (64 * 1024 * 1024)
 #endif
 
+/* LCD */
+/*
+#define CONFIG_SPLASH_SCREEN
+*/
+
+#ifdef CONFIG_SPLASH_SCREEN
+	#define CONFIG_LCD
+	#define CONFIG_MXC2_LCD 1
+	#undef LCD_TEST_PATTERN
+	#define CONFIG_FB_BASE				0x81400000
+	#define CONFIG_SYS_CONSOLE_IS_IN_ENV            1
+	#define CONFIG_SPLASH_SCREEN                    1
+	#define CONFIG_SPLASH_IS_IN_MMC                 1
+	#define LCD_BPP                                 LCD_COLOR16
+	/* #define CONFIG_SPLASH_SCREEN_ALIGN           1 */
+
+	#define CONFIG_CMD_BMP
+	#define CONFIG_BMP_24BPP 1
+	#define CONFIG_BMP_16BPP 1
+#endif
+
+
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+	#define CONFIG_SPLASH_IMG_MMC_DEV	0
+	#define CONFIG_SPLASH_IMG_OFFSET	0x4c000
+	#define CONFIG_SPLASH_IMG_SIZE		0x19000
+#endif
+
 /* Monitor at beginning of flash */
 /* #define CONFIG_FSL_ENV_IN_MMC */
 #define CONFIG_FSL_ENV_IN_NAND
diff --git a/include/lcd.h b/include/lcd.h
index 1f85daa..afb99ba 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ *
  * MPC823 and PXA LCD Controller
  *
  * Modeled after video interface by Paolo Scaffardi
@@ -181,6 +183,26 @@ typedef struct vidinfo {
 	u_long	mmio;		/* Memory mapped registers */
 } vidinfo_t;
 
+#elif defined(CONFIG_MXC2_LCD)
+
+typedef struct vidinfo {
+	u_long vl_refresh;	/* Refresh Rate Hz */
+	u_long vl_row;		/* resolution in x */
+	u_long vl_col;		/* resolution in y */
+	u_long vl_pixclock;	/* pixel clock in picoseconds */
+	u_long vl_left_margin;	/* Horizontal back porch */
+	u_long vl_right_margin; /* Horizontal front porch */
+	u_long vl_upper_margin; /* Vertical back porch */
+	u_long vl_lower_margin; /* Vertical front porch */
+	u_long vl_hsync;	/* Horizontal sync pulse length */
+	u_long vl_vsync;	/* Vertical sync pulse length */
+	u_long vl_sync;		/* Polarity on data enable */
+	u_long vl_mode;		/* Video Mode */
+	u_long vl_flag;
+	u_char	vl_bpix;
+	ushort	*cmap;
+} vidinfo_t;
+
 #else
 
 typedef struct vidinfo {
diff --git a/include/mx2fb.h b/include/mx2fb.h
new file mode 100644
index 0000000..de05bc0
--- /dev/null
+++ b/include/mx2fb.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*!
+ * @file mx2fb.h
+ *
+ * @brief MX 25 LCD controller header file.
+ *
+ *
+ */
+
+#ifndef __MX2FB_H__
+#define __MX2FB_H__
+
+
+/* LCDC register settings */
+
+#define LCDC_LSCR 0x00120300
+
+#define LCDC_LRMCR 0x00000000
+
+#define LCDC_LDCR 0x00020010
+
+#define LCDC_LPCCR 0x00a9037f
+
+#define LCDC_LPCR 0xFA008B80
+
+#define LCDC_LPCR_PCD 0x4
+
+#define FB_SYNC_OE_LOW_ACT	0x80000000
+#define FB_SYNC_CLK_LAT_FALL	0x40000000
+#define FB_SYNC_DATA_INVERT	0x20000000
+#define FB_SYNC_CLK_IDLE_EN	0x10000000
+#define FB_SYNC_SHARP_MODE	0x08000000
+#define FB_SYNC_SWAP_RGB	0x04000000
+
+#endif				/* __MX2FB_H__ */