summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorJon Loeliger <jdl@freescale.com>2006-04-27 10:15:16 -0500
committerJon Loeliger <jdl@freescale.com>2006-04-27 10:15:16 -0500
commit5c9efb36a6b5431423f52888a0e3b4b515fe7eca (patch)
treeb4e456a06357346267f16a636af658cc85bf5b64 /include
parenta2320a6bf8113a09544c42d160d10ac69d049a03 (diff)
downloadu-boot-imx-5c9efb36a6b5431423f52888a0e3b4b515fe7eca.zip
u-boot-imx-5c9efb36a6b5431423f52888a0e3b4b515fe7eca.tar.gz
u-boot-imx-5c9efb36a6b5431423f52888a0e3b4b515fe7eca.tar.bz2
Cleanup whitespaces and style issues.
Removed //-style comments. Use 80-column lines. Remove trailing whitespace. Remove dead code and debug cruft.
Diffstat (limited to 'include')
-rw-r--r--include/configs/MPC8641HPCN.h203
-rw-r--r--include/mpc86xx.h6
2 files changed, 87 insertions, 122 deletions
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 8d2e088..76efd7c 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -1,5 +1,6 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
+/*
+ * Copyright 2006 Freescale Semiconductor.
+ *
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
* See file CREDITS for list of people who contributed to this
@@ -22,8 +23,7 @@
*/
/*
- * mpc8641hpc3 board configuration file
- *
+ * MPC8641HPCN board configuration file
*
* Make sure you change the MAC address and other network params first,
* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
@@ -38,48 +38,38 @@
#define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */
#define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */
#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
-#undef DEBUG
+#undef DEBUG
-//#define RUN_DIAG 1
#ifdef RUN_DIAG
#define CFG_DIAG_ADDR 0xff800000
#endif
+
#define CFG_RESET_ADDRESS 0xfff00100
-//#define CONFIG_PCI
+#undef CONFIG_PCI
+
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
-/*#define CONFIG_DDR_ECC */ /* only for ECC DDR module */
-/*#define CONFIG_DDR_DLL */ /* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
-
+#undef CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
#define CONFIG_DDR_ECC /* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_ALTIVEC 1
-#define CONFIG_ALTIVEC 1
-/*-----------------------------------------------------------------------
+/*
* L2CR setup -- make sure this is right for your board!
*/
-
-#define CFG_L2
+#define CFG_L2
#define L2_INIT 0
#define L2_ENABLE (L2CR_L2E)
#ifndef CONFIG_SYS_CLK_FREQ
-//#define CONFIG_SYS_CLK_FREQ 33000000
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-/* JB - XXX - Are these available on 86xx? */
-#define CONFIG_BTB /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
-
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#undef CFG_DRAM_TEST /* memory test, takes time */
@@ -130,10 +120,10 @@
#define CFG_DDR_INTERVAL 0x06090100
#define CFG_DDR_DATA_INIT 0xdeadbeef
#define CFG_DDR_CLK_CTRL 0x03800000
- #define CFG_DDR_OCD_CTRL 0x00000000
- #define CFG_DDR_OCD_STATUS 0x00000000
+ #define CFG_DDR_OCD_CTRL 0x00000000
+ #define CFG_DDR_OCD_STATUS 0x00000000
#define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */
- #define CFG_DDR_CONTROL2 0x04400000
+ #define CFG_DDR_CONTROL2 0x04400000
//Not used in fixed_sdram function
@@ -143,20 +133,12 @@
#define CFG_DDR_CS3_BNDS 0x00000FFF //Not done
#define CFG_DDR_CS4_BNDS 0x00000FFF //Not done
#define CFG_DDR_CS5_BNDS 0x00000FFF //Not done
-
-
-
#endif
#endif
/*
- * SDRAM on the Local Bus
- */
-//#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
-//#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/* In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000
+ * In MPC8641HPCN, we allocate 16MB flash spaces at fe000000 and ff000000
* We only have an 8MB flash. In effect, the addresses from fe000000 to fe7fffff
* map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff.
* However, when u-boot comes up, the flash_init needs hard start addresses
@@ -165,15 +147,12 @@
* knows where the flash is and the user can download u-boot code from promjet to
* fef00000 <- more intuitive than fe700000. Note that, on switching the boot
* location, fef00000 becomes fff00000.
-*/
+ */
#define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */
-#define CFG_FLASH_BASE2 0xff800000
+#define CFG_FLASH_BASE2 0xff800000
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
-
-/*Sri: This looks like a good place to init all the Local Bus chip selects*/
-
#define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */
#define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/
@@ -186,25 +165,24 @@
#define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */
#define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/
-#define PIXIS_BASE 0xf8100000 /* PIXIS registers*/
-#define PIXIS_ID 0x0 /* MPC8641HPCN Board ID at offset 0*/
-#define PIXIS_VER 0x1 /* MPC8641HPCN board version version at offset 1*/
-#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2*/
-#define PIXIS_RST 0x4 /* PIXIS Reset Control register*/
-#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */
-#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
-#define PIXIS_VCTL 0x10 /* VELA Control Register */
-#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
-#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
-#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
-#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
-#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
-#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
-#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
+#define PIXIS_BASE 0xf8100000 /* PIXIS registers */
+#define PIXIS_ID 0x0 /* Board ID at offset 0 */
+#define PIXIS_VER 0x1 /* Board version at offset 1 */
+#define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */
+#define PIXIS_RST 0x4 /* PIXIS Reset Control register */
+#define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */
+#define PIXIS_SPD 0x7 /* Register for SYSCLK speed */
+#define PIXIS_VCTL 0x10 /* VELA Control Register */
+#define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */
+#define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */
+#define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */
+#define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */
+#define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */
+#define PIXIS_VCLKH 0x19 /* VELA VCLKH register */
+#define PIXIS_VCLKL 0x1A /* VELA VCLKL register */
#define CFG_MAX_FLASH_BANKS 2 /* number of banks */
-//#define CFG_MAX_FLASH_SECT 64 /* sectors per device */
#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
#undef CFG_FLASH_CHECKSUM
@@ -212,11 +190,9 @@
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
-/*#define CFG_HPCN_FLASH_CFI_DRIVER */
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO
-
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
@@ -230,7 +206,7 @@
#undef CONFIG_CLOCKS_IN_MHZ
#define CONFIG_L1_INIT_RAM
-#undef CFG_INIT_RAM_LOCK
+#undef CFG_INIT_RAM_LOCK
#ifndef CFG_INIT_RAM_LOCK
#define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
#else
@@ -265,20 +241,22 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
+/*
+ * Pass open firmware flat tree to kernel
+ */
+#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_BOARD_SETUP 1
/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE 8192
+#define OF_FLAT_TREE_MAX_SIZE 8192
-#define OF_CPU "PowerPC,8641@0"
-#define OF_SOC "soc8641@f8000000"
-#define OF_TBCLK (bd->bi_busfreq / 8)
-#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500"
+#define OF_CPU "PowerPC,8641@0"
+#define OF_SOC "soc8641@f8000000"
+#define OF_TBCLK (bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH "/soc8641@f8000000/serial@4500"
-#define CFG_64BIT_VSPRINTF 1
-#define CFG_64BIT_STRTOUL 1
+#define CFG_64BIT_VSPRINTF 1
+#define CFG_64BIT_STRTOUL 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
@@ -297,13 +275,10 @@
* Addresses are mapped 1-1.
*/
#define CFG_PCI1_MEM_BASE 0x80000000
-//#define CFG_PCI1_MEM_BASE 0xd0000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CFG_PCI1_IO_BASE 0xe2000000
-//#define CFG_PCI1_IO_BASE 0xe0000000
#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-//#define CFG_PCI1_IO_BUS 0x00000000
#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
/* For RTL8139 */
@@ -316,29 +291,18 @@
#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
-// #define CFG_PCI1_MEM_BASE 0x80000000
-// #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
-// #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-// #define CFG_PCI1_IO_BASE 0xe2000000
-// #define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-// #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
-
-
#if defined(CONFIG_PCI)
-
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-//#define CFG_SCSI_SCAN_BUS_REVERSE
-
+#undef CFG_SCSI_SCAN_BUS_REVERSE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_RTL8139
-
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
@@ -349,7 +313,6 @@
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-//#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
#endif /* CONFIG_PCI */
@@ -371,7 +334,6 @@
#define CONFIG_MPC86XX_TSEC4 1
#define CONFIG_MPC86XX_TSEC4_NAME "eTSEC4"
-
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
#define TSEC3_PHY_ADDR 2
@@ -389,12 +351,10 @@
/* BAT0 2G Cacheable, non-guarded
* 0x0000_0000 2G DDR
*/
-//#define CFG_DBAT0L (0x0 | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CFG_DBAT0L (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE)
-#define CFG_DBAT0U (0x0 | BATU_BL_512M | BATU_VS | BATU_VP)
-//#define CFG_IBAT0L CFG_DBAT0L
-//#define CFG_IBAT0L (0x0 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CFG_IBAT0L (0x0| BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE)
+#define CFG_DBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT \
+ | BATL_GUARDEDSTORAGE | BATL_MEMCOHERENCE )
+#define CFG_DBAT0U ( BATU_BL_512M | BATU_VS | BATU_VP )
+#define CFG_IBAT0L ( BATL_PP_RW | BATL_CACHEINHIBIT | BATL_MEMCOHERENCE)
#define CFG_IBAT0U CFG_DBAT0U
/* BAT1 1G Cache-inhibited, guarded
@@ -402,7 +362,8 @@
* 0xa000_0000 512M PCI-Express 2 Memory
** SS - Changed it for operating from 0xd0000000
*/
-#define CFG_DBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U CFG_DBAT1U
@@ -410,7 +371,8 @@
/* BAT2 512M Cache-inhibited, guarded
* 0xc000_0000 512M RapidIO Memory
*/
-#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U CFG_DBAT2U
@@ -418,7 +380,8 @@
/* BAT3 4M Cache-inhibited, guarded
* 0xf800_0000 4M CCSR
*/
-#define CFG_DBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT3U CFG_DBAT3U
@@ -428,7 +391,8 @@
* 0xe300_0000 16M PCI-Express 2 I/0
** SS - Note that this is at 0xe0000000
*/
-#define CFG_DBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U CFG_DBAT4U
@@ -444,12 +408,12 @@
/* BAT6 32M Cache-inhibited, guarded
* 0xfe00_0000 32M FLASH
*/
-#define CFG_DBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT6L ( CFG_FLASH_BASE | BATL_PP_RW \
+ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_DBAT6U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
#define CFG_IBAT6L (CFG_FLASH_BASE | BATL_PP_RW | BATL_MEMCOHERENCE)
#define CFG_IBAT6U CFG_DBAT6U
-
#define CFG_DBAT7L 0x00000000
#define CFG_DBAT7U 0x00000000
#define CFG_IBAT7L 0x00000000
@@ -461,17 +425,17 @@
/*
* Environment
*/
- #ifndef CFG_RAMBOOT
- #define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
- #define CFG_ENV_SIZE 0x2000
- #else
- #define CFG_NO_FLASH 1 /* Flash is not usable now */
- #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
- #define CFG_ENV_SIZE 0x2000
- #endif
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -572,24 +536,25 @@
#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
#endif
-#define CONFIG_HAS_ETH1 1
-#define CONFIG_HAS_ETH2 1
-#define CONFIG_HAS_ETH3 1
+#define CONFIG_HAS_ETH1 1
+#define CONFIG_HAS_ETH2 1
+#define CONFIG_HAS_ETH3 1
-#define CONFIG_IPADDR 10.82.193.138
+#define CONFIG_IPADDR 10.82.193.138
#define CONFIG_HOSTNAME unknown
#define CONFIG_ROOTPATH /opt/nfsroot
#define CONFIG_BOOTFILE uImage
-#define CONFIG_SERVERIP 10.82.193.104
-#define CONFIG_GATEWAYIP 10.82.193.254
-#define CONFIG_NETMASK 255.255.252.0
+#define CONFIG_SERVERIP 192.168.1.1
+#define CONFIG_GATEWAYIP 10.82.193.104
+#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 1000000 /* default location for tftp and bootm */
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+//#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"
#define CONFIG_BAUDRATE 115200
@@ -599,7 +564,7 @@
"consoledev=ttyS0\0" \
"ramdiskaddr=400000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
- "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0" \
+ "pex0=echo ---------------------------; echo --------- PCI EXPRESS -----\0"\
"pexstat=mw f8008000 84000004; echo -expect:- 16000000; md f8008004 1\0" \
"pex1=pci write 1.0.0 4 146; pci write 1.0.0 10 80000000\0" \
"pexd=echo -expect:- xxx01002 00100146; pci display 1.0.0 0 2\0" \
diff --git a/include/mpc86xx.h b/include/mpc86xx.h
index 61b5279..4edeae1 100644
--- a/include/mpc86xx.h
+++ b/include/mpc86xx.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2006 Freescale Semiconductor.
* Jeffrey Brown (jeffrey@freescale.com)
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*/
@@ -9,7 +9,7 @@
#define EXC_OFF_SYS_RESET 0x0100 /* System reset offset */
-/*----------------------------------------------------------------
+/*
* l2cr values. Look in config_<BOARD>.h for the actual setup
*/
#define l2cr 1017
@@ -23,7 +23,7 @@
#define L2CR_HWF 0x00000800 /* bit 20 - hardware flush */
#define L2CR_L2IP 0x00000001 /* global invalidate in progress */
-/*----------------------------------------------------------------
+/*
* BAT settings. Look in config_<BOARD>.h for the actual setup
*/