summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorJon Loeliger <jdl@freescale.com>2005-08-02 13:53:07 -0500
committerJon Loeliger <jdl@freescale.com>2005-08-02 13:53:07 -0500
commit4b1d95d96a39a71eddd088bb5e0e9e699035c9bf (patch)
tree57e2d52b0636c7299992e869fa0b0ee4da7ca4d2 /include
parentde1d0a69956a63cea6a62043ae5d5afb584efe93 (diff)
parent095b8a3798f1c6cd618092899e783dc2ee0d23f5 (diff)
downloadu-boot-imx-4b1d95d96a39a71eddd088bb5e0e9e699035c9bf.zip
u-boot-imx-4b1d95d96a39a71eddd088bb5e0e9e699035c9bf.tar.gz
u-boot-imx-4b1d95d96a39a71eddd088bb5e0e9e699035c9bf.tar.bz2
Merge with rsync://git-user@source.denx.net/git/u-boot.git
Diffstat (limited to 'include')
-rw-r--r--include/405gp_enet.h10
-rw-r--r--include/440_i2c.h4
-rw-r--r--include/440gx_enet.h8
-rw-r--r--include/asm-ppc/processor.h2
-rw-r--r--include/asm-ppc/u-boot.h7
-rw-r--r--include/configs/PPChameleonEVB.h2
-rw-r--r--include/configs/bamboo.h316
-rw-r--r--include/configs/bubinga.h (renamed from include/configs/BUBINGA405EP.h)169
-rw-r--r--include/configs/ebony.h (renamed from include/configs/EBONY.h)125
-rw-r--r--include/configs/ocotea.h (renamed from include/configs/OCOTEA.h)124
-rw-r--r--include/configs/walnut.h (renamed from include/configs/WALNUT405.h)261
-rw-r--r--include/configs/yellowstone.h298
-rw-r--r--include/configs/yosemite.h312
-rw-r--r--include/pci.h15
-rw-r--r--include/ppc440.h219
15 files changed, 1607 insertions, 265 deletions
diff --git a/include/405gp_enet.h b/include/405gp_enet.h
index 88ac4add..233ea11 100644
--- a/include/405gp_enet.h
+++ b/include/405gp_enet.h
@@ -67,7 +67,11 @@ struct arp_entry {
/*Register addresses */
#if defined(CONFIG_440)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
+#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
+#endif
#define ZMII_FER (ZMII_BASE)
#define ZMII_SSR (ZMII_BASE + 4)
#define ZMII_SMIISR (ZMII_BASE + 8)
@@ -77,7 +81,11 @@ struct arp_entry {
#endif /* CONFIG_440 */
#if defined(CONFIG_440)
-#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
#else
#define EMAC_BASE 0xEF600800
#endif
diff --git a/include/440_i2c.h b/include/440_i2c.h
index b0ac592..9fdf7d8 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,11 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
+#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
+#endif /*CONFIG_440_EP CONFIG_440_GR*/
#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
diff --git a/include/440gx_enet.h b/include/440gx_enet.h
index 8caf969..022c5d8 100644
--- a/include/440gx_enet.h
+++ b/include/440gx_enet.h
@@ -140,7 +140,11 @@ typedef struct emac_440gx_hw_st {
/*ZMII Bridge Register addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
+#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
+#endif
#define ZMII_FER (ZMII_BASE)
#define ZMII_SSR (ZMII_BASE + 4)
#define ZMII_SMIISR (ZMII_BASE + 8)
@@ -272,7 +276,11 @@ typedef struct emac_440gx_hw_st {
/* Ethernet MAC Regsiter Addresses */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
+#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
+#endif
#define EMAC_M0 (EMAC_BASE)
#define EMAC_M1 (EMAC_BASE + 4)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index d4404c1..6b131b6 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -723,6 +723,8 @@
#define PVR_405GPR_RB 0x50910951
#define PVR_440GP_RB 0x40120440
#define PVR_440GP_RC 0x40120481
+#define PVR_440EP_RA 0x42221850
+#define PVR_440EP_RB 0x422218D3
#define PVR_440GX_RA 0x51B21850
#define PVR_440GX_RB 0x51B21851
#define PVR_440GX_RC 0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index e821e91..5b6cd6f 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -101,13 +101,18 @@ typedef struct bd_info {
unsigned char bi_enet3addr[6];
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440_GX) || \
+ defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
#if defined(CONFIG_NX823)
unsigned char bi_sernum[8];
#endif
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+ int bi_phynum[2]; /* Determines phy mapping */
+ int bi_phymode[2]; /* Determines phy mode */
+#endif
#if defined(CONFIG_440_GX)
int bi_phynum[4]; /* Determines phy mapping */
int bi_phymode[4]; /* Determines phy mode */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index d7025eb..ca0bd12 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -47,7 +47,7 @@
* CONFIG_PPCHAMELEON_CLK_33
*/
#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_PPCHAMELEON_CLK_33
+#define CONFIG_PPCHAMELEON_CLK_25
#endif
#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
new file mode 100644
index 0000000..6ccd8b9
--- /dev/null
+++ b/include/configs/bamboo.h
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * bamboo.h - configuration for BAMBOO board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
+#define CONFIG_440_EP 1 /* Specific PPC440EP support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+/*#define CONFIG_SYS_CLK_FREQ 66666666 /X* external freq to pll */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+/*#define CFG_SDRAM_BANKS (2) */
+#define CFG_SDRAM_BANKS (1)
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 0 /* test-only */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+#else
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/BUBINGA405EP.h b/include/configs/bubinga.h
index 507cb75..c745195 100644
--- a/include/configs/BUBINGA405EP.h
+++ b/include/configs/bubinga.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -28,11 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* Debug options */
-/*#define __DEBUG_START_FROM_SRAM__ */
-/*#define DEBUG 1*/
-
-
/*
* High Level Configuration Options
* (easy to change)
@@ -40,7 +35,7 @@
#define CONFIG_405EP 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_BUBINGA405EP 1 /* ...on a BUBINGA405EP board */
+#define CONFIG_BUBINGA 1 /* ...on a BUBINGA board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
@@ -49,8 +44,6 @@
#define CONFIG_NO_SERIAL_EEPROM
/*#undef CONFIG_NO_SERIAL_EEPROM*/
/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
#ifdef CONFIG_NO_SERIAL_EEPROM
/*
@@ -75,49 +68,60 @@
#endif
/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*#define CFG_ENV_IS_IN_FLASH 1*/ /* use FLASH for environment vars */
-#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
#if 1
-#define CONFIG_BOOTCOMMAND "" /* autoboot command */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
#endif
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
-#else
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#endif
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=bubinga\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/bubinga/uImage\0" \
+ "kernel_addr=fff80000\0" \
+ "ramdisk_addr=fff90000\0" \
+ "load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run net_nfs"
#if 0
-#define CONFIG_BOOTARGS "root=/dev/nfs " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
- "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#define CONFIG_BOOTARGS "root=/dev/hda1 " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
+#define CONFIG_BAUDRATE 115200
+
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -126,29 +130,8 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Bubinga */
-/*
-#ifndef __DEBUG_START_FROM_SRAM__
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_DATE | \
- CFG_CMD_ELF )
-#endif
-*/
-
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
CFG_CMD_CACHE | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
@@ -156,14 +139,13 @@
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- 0 )
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -198,6 +180,7 @@
* If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
* set Linux BASE_BAUD to 403200.
*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
#define CFG_BASE_BAUD 691200
@@ -211,6 +194,17 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
@@ -224,7 +218,6 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#endif
-
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
@@ -239,8 +232,8 @@
/* resource configuration */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
#define CFG_PCI_CLASSCODE 0x0600 /* PCI Class Code: bridge/host */
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
@@ -253,9 +246,6 @@
* External peripheral base address
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
-
#define CFG_KEY_REG_BASE_ADDR 0xF0100000
#define CFG_IR_REG_BASE_ADDR 0xF0200000
#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
@@ -266,20 +256,11 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_SRAM_BASE 0xFFF80000
-#define CFG_FLASH_BASE 0xFFF00000
-#define CFG_MONITOR_BASE CFG_SRAM_BASE
-#else
#define CFG_SRAM_BASE 0xFFF00000
#define CFG_FLASH_BASE 0xFFF80000
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#endif
-
-
-/*#define CFG_MONITOR_LEN (200 * 1024) /XXX* Reserve 200 kB for Monitor */
-#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 200 kB for Monitor */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
/*
* For booting Linux, the board info and command line data
@@ -287,6 +268,7 @@
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
/*-----------------------------------------------------------------------
* FLASH organization
*/
@@ -296,13 +278,20 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* NVRAM organization
*/
@@ -332,7 +321,6 @@
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
-
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in data cache)
*/
@@ -424,7 +412,6 @@
#define FPGA_REG1_OFFB_FLASH 0x02 /* Off board flash */
#define FPGA_REG1_SRAM_BOOT 0x01 /* SRAM at 0xFFF80000 not Flash */
-
/*
* Internal Definitions
*
diff --git a/include/configs/EBONY.h b/include/configs/ebony.h
index 46e729f..ebd0b53 100644
--- a/include/configs/EBONY.h
+++ b/include/configs/ebony.h
@@ -36,20 +36,31 @@
#undef CFG_DRAM_TEST /* Disable-takes long time! */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
+
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CFG_FLASH_BASE 0xff800000 /* start of FLASH */
-#define CFG_MONITOR_BASE 0xfff80000 /* start of monitor */
+#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
-#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
@@ -69,7 +80,7 @@
*----------------------------------------------------------------------*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
@@ -87,16 +98,37 @@
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#define CFG_MAX_FLASH_BANKS 3 /* number of banks */
#define CFG_MAX_FLASH_SECT 32 /* sectors per device */
-#undef CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
@@ -112,22 +144,47 @@
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=ebony\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/ebony/uImage\0" \
+ "kernel_addr=ff800000\0" \
+ "ramdisk_addr=ff810000\0" \
+ "load=tftp 100000 /tftpboot/ebony/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS "root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#define CONFIG_BOOTDELAY -1 /* disable autoboot */
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@@ -135,16 +192,22 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 8 /* PHY address */
-
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_I2C | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -173,6 +236,12 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* PCI stuff
@@ -188,7 +257,7 @@
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT /* let board init pci target */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
diff --git a/include/configs/OCOTEA.h b/include/configs/ocotea.h
index 5e78b45..4f90b1b 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/ocotea.h
@@ -1,6 +1,9 @@
/*
* (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -85,6 +88,21 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
+
+
+/*-----------------------------------------------------------------------
* NVRAM/RTC
*
* NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
@@ -97,6 +115,12 @@
#define CFG_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs */
#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
+#define CFG_ENV_ADDR \
+ (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
@@ -107,6 +131,20 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
@@ -122,22 +160,46 @@
#define CFG_I2C_SLAVE 0x7F
#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=ocotea\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/ocotea/uImage\0" \
+ "kernel_addr=fff00000\0" \
+ "ramdisk_addr=fff10000\0" \
+ "load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */
-#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
-#define CONFIG_ENV_OVERWRITE 1
-
-#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
-#define CFG_ENV_ADDR \
- (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS "root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#define CONFIG_BOOTDELAY -1 /* disable autoboot */
#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
@@ -151,32 +213,22 @@
#define CONFIG_PHY3_ADDR 0x18
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.1.2.3
-#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D
-#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP 10.1.2.2
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -206,22 +258,28 @@
#define CFG_HZ 100 /* decrementer freq: 1 ms ticks */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
-#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
/*
@@ -233,7 +291,7 @@
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 32768 /* For IBM 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
diff --git a/include/configs/WALNUT405.h b/include/configs/walnut.h
index 9155ce8..3a8e61c 100644
--- a/include/configs/WALNUT405.h
+++ b/include/configs/walnut.h
@@ -1,6 +1,6 @@
/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2000-2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -34,69 +34,80 @@
*/
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_WALNUT405 1 /* ...on a WALNUT405 board */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_WALNUT 1 /* ...on a WALNUT board */
+ /* ...and on a SYCAMORE board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=walnut\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/walnut/uImage\0" \
+ "kernel_addr=fff80000\0" \
+ "ramdisk_addr=fff80000\0" \
+ "load=tftp 100000 /tftpboot/walnut/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run net_nfs"
-/*#define CFG_ENV_IS_IN_FLASH 1*/ /* use FLASH for environment vars */
-#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#if 1
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#else
-#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
-#endif
-
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#if 0
-#define CONFIG_BOOTARGS "root=/dev/nfs " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
- "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
-#else
-#define CONFIG_BOOTARGS "root=/dev/hda1 " \
- "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
-#endif
+#define CONFIG_BAUDRATE 115200
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_PCI | \
- CFG_CMD_IRQ | \
- CFG_CMD_KGDB | \
- CFG_CMD_DHCP | \
+ CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF )
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -111,9 +122,9 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
@@ -131,9 +142,10 @@
* If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
* set Linux BASE_BAUD to 403200.
*/
-#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD 691200
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
@@ -142,46 +154,46 @@
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CFG_I2C_SLAVE 0x7F
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
/*-----------------------------------------------------------------------
- * PCI stuff
+ * I2C stuff
*-----------------------------------------------------------------------
*/
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
- /* resource configuration */
-
-#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
/*-----------------------------------------------------------------------
- * External peripheral base address
+ * PCI stuff
*-----------------------------------------------------------------------
*/
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* no reset for ide supported */
-
-#define CFG_KEY_REG_BASE_ADDR 0xF0100000
-#define CFG_IR_REG_BASE_ADDR 0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
@@ -190,9 +202,20 @@
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0xFFF80000
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ * supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
+#endif
/*
* For booting Linux, the board info and command line data
@@ -200,22 +223,35 @@
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
/*-----------------------------------------------------------------------
* FLASH organization
*/
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET 0x00050000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
/*-----------------------------------------------------------------------
* NVRAM organization
*/
@@ -227,44 +263,61 @@
#define CFG_ENV_ADDR \
(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
#endif
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+ /* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
*/
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+/* Memory Bank 0 (Flash Bank 0) initialization */
+#define CFG_EBC_PB0AP 0x9B015480
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB1AP 0x02815480
+#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR 0xF0000500
+#define CFG_EBC_PB2AP 0x04815A80
+#define CFG_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB3AP 0x01815280
+#define CFG_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+
+#define CFG_EBC_PB7AP 0x01815280
+#define CFG_EBC_PB7CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#define CFG_KEY_REG_BASE_ADDR 0xF0100000
+#define CFG_IR_REG_BASE_ADDR 0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
+ * Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
+#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
-#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Definitions for Serial Presence Detect EEPROM address
* (to get SDRAM settings)
*/
-#define SPD_EEPROM_ADDRESS 0x50
+#define SPD_EEPROM_ADDRESS 0x50
/*
* Internal Definitions
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
new file mode 100644
index 0000000..d83d8e7
--- /dev/null
+++ b/include/configs/yellowstone.h
@@ -0,0 +1,298 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yellowstone.h - configuration for YELLOWSTONE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
+#define CONFIG_440_GR 1 /* Specific PPC440GR support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xf0000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
new file mode 100644
index 0000000..18d6623
--- /dev/null
+++ b/include/configs/yosemite.h
@@ -0,0 +1,312 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * yosemite.h - configuration for YOSEMITE board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
+#define CONFIG_440_EP 1 /* Specific PPC440EP support */
+
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs */
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_END 0x2000
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_SERIAL_MULTI 1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 1 /* test-only */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
+#else
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE 0x200 /* Size of Environment vars */
+#define CFG_ENV_OFFSET 0x0
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
+#define CONFIG_BOOTDELAY 3 /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.0.4.251
+#define CONFIG_ETHADDR 00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR 00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP 10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+ /* Need to define POST */
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
+ 0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ 0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/pci.h b/include/pci.h
index 458be23..8f19997 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -160,6 +160,21 @@
#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+/* From 440ep */
+#define PCI_ERREN 0x48 /* Error Enable */
+#define PCI_ERRSTS 0x49 /* Error Status */
+#define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */
+#define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */
+#define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */
+#define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */
+#define PCI_CAPID 0x58 /* Capability Identifier */
+#define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */
+#define PCI_PMC 0x5A /* Power Management Capabilities */
+#define PCI_PMCSR 0x5C /* Power Management Control Status */
+#define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */
+#define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */
+#define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */
+
/* Header type 2 (CardBus bridges) */
#define PCI_CB_CAPABILITY_LIST 0x14
/* 0x15 reserved */
diff --git a/include/ppc440.h b/include/ppc440.h
index acd4572..3e9034f 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -78,7 +78,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440_GX)
+#if defined(CONFIG_440_GX) || defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -108,6 +108,7 @@
#define icdbtrh 0x39f /* instruction cache debug tag register high */
#define mmucr 0x3b2 /* mmu control register */
#define ccr0 0x3b3 /* core configuration register 0 */
+#define ccr1 0x378 /* core configuration for 440x5 only */
#define icdbdr 0x3d3 /* instruction cache debug data register */
#define dbdr 0x3f3 /* debug data register */
@@ -131,6 +132,7 @@
#define clk_opbd 0x00c0
#define clk_perd 0x00e0
#define clk_mald 0x0100
+#define clk_spcid 0x0120
#define clk_icfg 0x0140
/* 440gx sdr register definations */
@@ -149,19 +151,24 @@
#define sdr_ebc 0x0100
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
+#define sdr_uart2 0x0122 /* UART2 Config */
+#define sdr_uart3 0x0123 /* UART3 Config */
#define sdr_cp440 0x0180
#define sdr_xcr 0x01c0
#define sdr_xpllc 0x01c1
#define sdr_xplld 0x01c2
#define sdr_srst 0x0200
#define sdr_slpipe 0x0220
-#define sdr_amp 0x0240
+#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
+#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
#define sdr_mirq0 0x0260
#define sdr_mirq1 0x0261
#define sdr_maltbl 0x0280
#define sdr_malrbl 0x02a0
#define sdr_maltbs 0x02c0
#define sdr_malrbs 0x02e0
+#define sdr_pci0 0x0300
+#define sdr_usb0 0x0320
#define sdr_cust0 0x4000
#define sdr_sdstp2 0x4001
#define sdr_cust1 0x4002
@@ -234,6 +241,98 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x23 /* external bus core id reg */
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PLB4 to PLB3 Bridge OUT */
+#define P4P3_DCR_BASE 0x020
+#define p4p3_esr0_read (P4P3_DCR_BASE+0x0)
+#define p4p3_esr0_write (P4P3_DCR_BASE+0x1)
+#define p4p3_eadr (P4P3_DCR_BASE+0x2)
+#define p4p3_euadr (P4P3_DCR_BASE+0x3)
+#define p4p3_esr1_read (P4P3_DCR_BASE+0x4)
+#define p4p3_esr1_write (P4P3_DCR_BASE+0x5)
+#define p4p3_confg (P4P3_DCR_BASE+0x6)
+#define p4p3_pic (P4P3_DCR_BASE+0x7)
+#define p4p3_peir (P4P3_DCR_BASE+0x8)
+#define p4p3_rev (P4P3_DCR_BASE+0xA)
+
+/* PLB3 to PLB4 Bridge IN */
+#define P3P4_DCR_BASE 0x030
+#define p3p4_esr0_read (P3P4_DCR_BASE+0x0)
+#define p3p4_esr0_write (P3P4_DCR_BASE+0x1)
+#define p3p4_eadr (P3P4_DCR_BASE+0x2)
+#define p3p4_euadr (P3P4_DCR_BASE+0x3)
+#define p3p4_esr1_read (P3P4_DCR_BASE+0x4)
+#define p3p4_esr1_write (P3P4_DCR_BASE+0x5)
+#define p3p4_confg (P3P4_DCR_BASE+0x6)
+#define p3p4_pic (P3P4_DCR_BASE+0x7)
+#define p3p4_peir (P3P4_DCR_BASE+0x8)
+#define p3p4_rev (P3P4_DCR_BASE+0xA)
+
+/* PLB3 Arbiter */
+#define PLB3_DCR_BASE 0x070
+#define plb3_revid (PLB3_DCR_BASE+0x2)
+#define plb3_besr (PLB3_DCR_BASE+0x3)
+#define plb3_bear (PLB3_DCR_BASE+0x6)
+#define plb3_acr (PLB3_DCR_BASE+0x7)
+
+/* PLB4 Arbiter - PowerPC440EP Pass1 */
+#define PLB4_DCR_BASE 0x080
+#define plb4_revid (PLB4_DCR_BASE+0x2)
+#define plb4_acr (PLB4_DCR_BASE+0x3)
+#define plb4_besr (PLB4_DCR_BASE+0x4)
+#define plb4_bearl (PLB4_DCR_BASE+0x6)
+#define plb4_bearh (PLB4_DCR_BASE+0x7)
+
+/* Nebula PLB4 Arbiter - PowerPC440EP */
+#define PLB_ARBITER_BASE 0x80
+
+#define plb0_revid (PLB_ARBITER_BASE+ 0x00)
+#define plb0_acr (PLB_ARBITER_BASE+ 0x01)
+#define plb0_acr_ppm_mask 0xF0000000
+#define plb0_acr_ppm_fixed 0x00000000
+#define plb0_acr_ppm_fair 0xD0000000
+#define plb0_acr_hbu_mask 0x08000000
+#define plb0_acr_hbu_disabled 0x00000000
+#define plb0_acr_hbu_enabled 0x08000000
+#define plb0_acr_rdp_mask 0x06000000
+#define plb0_acr_rdp_disabled 0x00000000
+#define plb0_acr_rdp_2deep 0x02000000
+#define plb0_acr_rdp_3deep 0x04000000
+#define plb0_acr_rdp_4deep 0x06000000
+#define plb0_acr_wrp_mask 0x01000000
+#define plb0_acr_wrp_disabled 0x00000000
+#define plb0_acr_wrp_2deep 0x01000000
+
+#define plb0_besrl (PLB_ARBITER_BASE+ 0x02)
+#define plb0_besrh (PLB_ARBITER_BASE+ 0x03)
+#define plb0_bearl (PLB_ARBITER_BASE+ 0x04)
+#define plb0_bearh (PLB_ARBITER_BASE+ 0x05)
+#define plb0_ccr (PLB_ARBITER_BASE+ 0x08)
+
+#define plb1_acr (PLB_ARBITER_BASE+ 0x09)
+#define plb1_acr_ppm_mask 0xF0000000
+#define plb1_acr_ppm_fixed 0x00000000
+#define plb1_acr_ppm_fair 0xD0000000
+#define plb1_acr_hbu_mask 0x08000000
+#define plb1_acr_hbu_disabled 0x00000000
+#define plb1_acr_hbu_enabled 0x08000000
+#define plb1_acr_rdp_mask 0x06000000
+#define plb1_acr_rdp_disabled 0x00000000
+#define plb1_acr_rdp_2deep 0x02000000
+#define plb1_acr_rdp_3deep 0x04000000
+#define plb1_acr_rdp_4deep 0x06000000
+#define plb1_acr_wrp_mask 0x01000000
+#define plb1_acr_wrp_disabled 0x00000000
+#define plb1_acr_wrp_2deep 0x01000000
+
+#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A)
+#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B)
+#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
+#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
+
+#else
+
/*-----------------------------------------------------------------------------
| Internal SRAM
+----------------------------------------------------------------------------*/
@@ -265,6 +364,7 @@
#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
#endif /* CONFIG_440_GX */
+#endif /* !CONFIG_440_EP !CONFIG_440_GR*/
/*-----------------------------------------------------------------------------
| On-Chip Buses
@@ -417,10 +517,8 @@
#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
-#if defined(CONFIG_440_GX)
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
-#endif /* CONFIG_440_GX */
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
#if defined(CONFIG_440_GX)
@@ -893,6 +991,23 @@
#define SDR0_MFR_ECS_MASK 0x10000000
#define SDR0_MFR_ECS_INTERNAL 0x10000000
+#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+
#define SDR0_SRST_BGO 0x80000000
#define SDR0_SRST_PLB 0x40000000
#define SDR0_SRST_EBC 0x20000000
@@ -927,7 +1042,7 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440_GX)
+#if !defined (CONFIG_440_GX) && !defined(CONFIG_440_EP) && !defined(CONFIG_440_GR)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -945,7 +1060,7 @@
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
-#else /* !CONFIG_440_GX */
+#else /* !CONFIG_440_GX or CONFIG_440_EP or CONFIG_440_GR */
#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
@@ -956,6 +1071,19 @@
#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
+#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
+#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
+#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
+#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
+#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
+#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
+
+#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
+#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
+#define PRADV_MASK 0x07000000 /* Primary Divisor A */
+#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
+#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
+
#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
@@ -1023,6 +1151,34 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+
+/* PCI Local Configuration Registers
+ --------------------------------- */
+#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */
+
+/* PCI Master Local Configuration Registers */
+#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
+#define PCIX0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
+#define PCIX0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
+#define PCIX0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
+#define PCIX0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
+#define PCIX0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
+#define PCIX0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
+#define PCIX0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
+#define PCIX0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
+#define PCIX0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
+#define PCIX0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
+#define PCIX0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
+
+/* PCI Target Local Configuration Registers */
+#define PCIX0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */
+#define PCIX0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
+#define PCIX0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */
+#define PCIX0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
+
+#else
+
#define PCIX0_VENDID (PCIX0_CFGBASE + PCI_VENDOR_ID )
#define PCIX0_DEVID (PCIX0_CFGBASE + PCI_DEVICE_ID )
#define PCIX0_CMD (PCIX0_CFGBASE + PCI_COMMAND )
@@ -1079,6 +1235,52 @@
#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
+#endif /* !defined(CONFIG_440_EP) !defined(CONFIG_440_GR) */
+
+/******************************************************************************
+ * GPIO macro register defines
+ ******************************************************************************/
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00)
+#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00)
+
+#define GPIO0_OR (GPIO_BASE0+0x0)
+#define GPIO0_TCR (GPIO_BASE0+0x4)
+#define GPIO0_OSRL (GPIO_BASE0+0x8)
+#define GPIO0_OSRH (GPIO_BASE0+0xC)
+#define GPIO0_TSRL (GPIO_BASE0+0x10)
+#define GPIO0_TSRH (GPIO_BASE0+0x14)
+#define GPIO0_ODR (GPIO_BASE0+0x18)
+#define GPIO0_IR (GPIO_BASE0+0x1C)
+#define GPIO0_RR1 (GPIO_BASE0+0x20)
+#define GPIO0_RR2 (GPIO_BASE0+0x24)
+#define GPIO0_RR3 (GPIO_BASE0+0x28)
+#define GPIO0_ISR1L (GPIO_BASE0+0x30)
+#define GPIO0_ISR1H (GPIO_BASE0+0x34)
+#define GPIO0_ISR2L (GPIO_BASE0+0x38)
+#define GPIO0_ISR2H (GPIO_BASE0+0x3C)
+#define GPIO0_ISR3L (GPIO_BASE0+0x40)
+#define GPIO0_ISR3H (GPIO_BASE0+0x44)
+
+#define GPIO1_OR (GPIO_BASE1+0x0)
+#define GPIO1_TCR (GPIO_BASE1+0x4)
+#define GPIO1_OSRL (GPIO_BASE1+0x8)
+#define GPIO1_OSRH (GPIO_BASE1+0xC)
+#define GPIO1_TSRL (GPIO_BASE1+0x10)
+#define GPIO1_TSRH (GPIO_BASE1+0x14)
+#define GPIO1_ODR (GPIO_BASE1+0x18)
+#define GPIO1_IR (GPIO_BASE1+0x1C)
+#define GPIO1_RR1 (GPIO_BASE1+0x20)
+#define GPIO1_RR2 (GPIO_BASE1+0x24)
+#define GPIO1_RR3 (GPIO_BASE1+0x28)
+#define GPIO1_ISR1L (GPIO_BASE1+0x30)
+#define GPIO1_ISR1H (GPIO_BASE1+0x34)
+#define GPIO1_ISR2L (GPIO_BASE1+0x38)
+#define GPIO1_ISR2H (GPIO_BASE1+0x3C)
+#define GPIO1_ISR3L (GPIO_BASE1+0x40)
+#define GPIO1_ISR3H (GPIO_BASE1+0x44)
+#endif
+
/*
* Macros for accessing the indirect EBC registers
*/
@@ -1111,12 +1313,17 @@ typedef struct {
unsigned long pllFwdDivB;
unsigned long pllFbkDiv;
unsigned long pllOpbDiv;
+ unsigned long pllPciDiv;
unsigned long pllExtBusDiv;
unsigned long freqVCOMhz; /* in MHz */
unsigned long freqProcessor;
+ unsigned long freqTmrClk;
unsigned long freqPLB;
unsigned long freqOPB;
unsigned long freqEPB;
+ unsigned long freqPCI;
+ unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
+ unsigned long pciClkSync; /* PCI clock is synchronous */
} PPC440_SYS_INFO;
#endif /* _ASMLANGUAGE */