Merge with pollux.denx.org:/home/git/u-boot/.git

14 files changed, 1310 insertions, 6 deletions

diff --git a/include/common.h b/include/common.h
index efc638d..8536a99 100644
--- a/include/common.h
+++ b/include/common.h
@@ -302,7 +302,8 @@ void	board_ether_init (void);
 #endif
 
 #if defined(CONFIG_RPXCLASSIC)	|| defined(CONFIG_MBX) || \
-    defined(CONFIG_IAD210)	|| defined(CONFIG_XPEDITE1K)
+    defined(CONFIG_IAD210)	|| defined(CONFIG_XPEDITE1K) || \
+    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF)
 void	board_get_enetaddr (uchar *addr);
 #endif
 
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index b917092..a251298 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -32,12 +32,14 @@
  * High Level Configuration Options
  * (easy to change)
  */
+#define CONFIG_IDENT_STRING     " $Name:  $"
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_DU405		1	/* ...on a DU405 board		*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
+#define CONFIG_MISC_INIT_R      1       /* call misc_init_r()           */
 
 #define CONFIG_SYS_CLK_FREQ	25000000 /* external frequency to pll	*/
 
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
new file mode 100644
index 0000000..331131a
--- /dev/null
+++ b/include/configs/KAREF.h
@@ -0,0 +1,309 @@
+/*
+ * (C) Copyright 2004 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
+ *		    design.
+ ***********************************************************************/
+
+/*
+ * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KAREF	     1		/* Board is Kamino Ref Variant */
+#define CONFIG_440GX		  1	     /* Specifc GX support	*/
+#define CONFIG_4xx		  1	     /* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
+#define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
+#define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
+#undef	CFG_DRAM_TEST			     /* Disable-takes long time!*/
+#define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
+
+#define CONFIG_VERY_BIG_RAM 1
+#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design"
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
+#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
+#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor	*/
+#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
+#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
+#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
+#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
+
+#define CFG_NVRAM_BASE_ADDR   (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_KAREF_FPGA_BASE   (CFG_PERIPHERAL_BASE + 0x08200000)
+#define CFG_OFEM_FPGA_BASE    (CFG_PERIPHERAL_BASE + 0x08400000)
+#define CFG_BME32_BASE	      (CFG_PERIPHERAL_BASE + 0x08500000)
+#define CFG_GPIO_BASE	      (CFG_PERIPHERAL_BASE + 0x00000700)
+
+/* Here for completeness */
+#define CFG_OFEMAC_BASE	      (CFG_PERIPHERAL_BASE + 0x08600000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM    1
+#define CFG_OCM_DATA_ADDR     CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address	*/
+#define CFG_INIT_RAM_END      0x2000	     /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+
+#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR    (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET    CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
+#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SERIAL_MULTI   1
+#define CONFIG_BAUDRATE	      9600
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
+ * The DS1743 code assumes this condition (i.e. -- it assumes the base
+ * address for the RTC registers is:
+ *
+ *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_RTC_DS174x     1		     /* DS1743 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS   1		     /* number of banks		*/
+#define CFG_MAX_FLASH_SECT    8		     /* sectors per device	*/
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
+#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM     1		     /* Use SPD EEPROM for setup*/
+#define SPD_EEPROM_ADDRESS    {0x53}	     /* SPD i2c spd addresses	*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
+#undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
+#define CFG_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
+#define CFG_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
+#define CFG_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
+#define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
+#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
+#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
+
+#define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
+#define CFG_ENV_ADDR	      (CFG_NVRAM_BASE_ADDR)
+
+#define CONFIG_BOOTDELAY      5		    /* 5 second autoboot */
+
+#define CONFIG_LOADS_ECHO     1		     /* echo on for serial dnld */
+#define CFG_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
+
+/*-----------------------------------------------------------------------
+ * Networking
+ *----------------------------------------------------------------------*/
+#define CONFIG_MII	      1		     /* MII PHY management	*/
+#define CONFIG_NET_MULTI      1
+#define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
+#define CONFIG_PHY1_ADDR      0xff	     /* no phy on EMAC1		*/
+#define CONFIG_PHY2_ADDR      0x08	     /* PHY addr, MGMT, EMAC2	*/
+#define CONFIG_PHY3_ADDR      0x18	     /* PHY addr, LCL, EMAC3	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_CIS8201_PHY    1		     /* RGMII mode for Cicada	*/
+#define CONFIG_CIS8201_SHORT_ETCH 1	     /* Use short etch mode	*/
+#define CONFIG_PHY_GIGE	      1		     /* GbE speed/duplex detect */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_NETMASK	      255.255.0.0
+#define CONFIG_ETHADDR	      00:00:00:00:00:00 /* No EMAC 0 support	*/
+#define CONFIG_ETH1ADDR	      00:00:00:00:00:00 /* No EMAC 1 support	*/
+#define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
+
+
+/*-----------------------------------------------------------------------
+ * Console/Commands/Parser
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_BEDBUG	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_FAT)
+
+/* Include NetConsole support */
+#define CONFIG_NETCONSOLE
+
+/* Include auto complete with tabs */
+#define CONFIG_AUTO_COMPLETE 1
+#define CFG_AUTO_COMPLETE    1
+#define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP			     /* undef to save memory	*/
+#define CFG_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
+#define CFG_PROMPT_HUSH_PS2    "> "
+
+
+/*-----------------------------------------------------------------------
+ * Console Buffer
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+					     /* Print Buffer Size	*/
+#define CFG_MAXARGS	      16	     /* max number of cmd args	*/
+#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size	*/
+
+/*-----------------------------------------------------------------------
+ * Memory Test
+ *----------------------------------------------------------------------*/
+#define CFG_MEMTEST_START     0x0400000	     /* memtest works on	*/
+#define CFG_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
+
+/*-----------------------------------------------------------------------
+ * Compact Flash (in true IDE mode)
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR	0xF0000000
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
+#define CFG_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
+
+#define CFG_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
+					    to get to the correct offset */
+#define CONFIG_DOS_PARTITION  1		     /* Include dos partition	*/
+
+/*-----------------------------------------------------------------------
+ * PCI
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			     /* include pci support	*/
+#define CONFIG_PCI_PNP			     /* do pci plug-and-play	*/
+#define CONFIG_PCI_SCAN_SHOW		     /* show pci devices	*/
+#define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		     /* enable board pci_pre_init*/
+#define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE	      8192	     /* For IBM 405 CPUs	*/
+#define CFG_CACHELINE_SIZE    32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
+#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
+#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#undef CONFIG_WATCHDOG			     /* watchdog disabled	*/
+#define CFG_LOAD_ADDR	      0x8000000	     /* default load address	*/
+#define CFG_EXTBDINFO	      1		     /* use extended board_info */
+
+#define CFG_HZ		      100	     /* decr freq: 1 ms ticks	*/
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
new file mode 100644
index 0000000..2b4a33f
--- /dev/null
+++ b/include/configs/METROBOX.h
@@ -0,0 +1,377 @@
+/*
+ * (C) Copyright 2004 Sandburst Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * METROBOX.h - configuration Sandburst MetroBox
+ ***********************************************************************/
+
+/*
+ * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $
+ *
+ *
+ * $Log: METROBOX.h,v $
+ * Revision 1.21  2005/06/03 15:05:25  tsawyer
+ * MB rev 2.0.3 KA rev 0.0.7.  Add CONFIG_VERSION_VARIABLE, Add fakeled to MB
+ *
+ * Revision 1.20  2005/04/11 20:51:11  tsawyer
+ * fix ethernet
+ *
+ * Revision 1.19  2005/04/06 15:13:36  tsawyer
+ * Update appropriate files to coincide with u-boot 1.1.3
+ *
+ * Revision 1.18  2005/03/10 14:16:02  tsawyer
+ * add def'n for cis8201 short etch option.
+ *
+ * Revision 1.17  2005/03/09 19:49:51  tsawyer
+ * Remove KGDB to allow use of 2nd serial port
+ *
+ * Revision 1.16  2004/12/02 19:00:23  tsawyer
+ * Add misc_init_f to turn on i2c-1 and all four fans before sdram init
+ *
+ * Revision 1.15  2004/09/15 18:04:12  tsawyer
+ * add multiple serial port support
+ *
+ * Revision 1.14  2004/09/03 15:27:51  tsawyer
+ * All metrobox boards are at 66.66 sys clock
+ *
+ * Revision 1.13  2004/08/05 20:27:46  tsawyer
+ * Remove system ace definitions, add net console support
+ *
+ * Revision 1.12  2004/07/29 20:00:13  tsawyer
+ * Add i2c bus 1
+ *
+ * Revision 1.11  2004/07/21 13:44:18  tsawyer
+ * SystemACE is out, CF direct to local bus is in
+ *
+ * Revision 1.10  2004/06/29 19:08:55  tsawyer
+ * Add CONFIG_MISC_INIT_R
+ *
+ * Revision 1.9	 2004/06/28 21:30:53  tsawyer
+ * Fix default BOOTARGS
+ *
+ * Revision 1.8	 2004/06/17 15:51:08  tsawyer
+ * auto complete
+ *
+ * Revision 1.7	 2004/06/17 15:08:49  tsawyer
+ * Add autocomplete
+ *
+ * Revision 1.6	 2004/06/15 12:33:57  tsawyer
+ * debugging checkpoint
+ *
+ * Revision 1.5	 2004/06/12 19:48:28  tsawyer
+ * Debugging checkpoint
+ *
+ * Revision 1.4	 2004/06/02 13:03:06  tsawyer
+ * Fix eth addrs
+ *
+ * Revision 1.3	 2004/05/18 19:56:10  tsawyer
+ * Change default bootcommand to pImage.metrobox
+ *
+ * Revision 1.2	 2004/05/18 14:13:44  tsawyer
+ * Add bringup values for bootargs and bootcommand.
+ * Remove definition of ipaddress and serverip addresses.
+ *
+ * Revision 1.1	 2004/04/16 15:08:54  tsawyer
+ * Initial Revision
+ *
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_METROBOX		  1	     /* Board is Metrobox	*/
+#define CONFIG_440GX		  1	     /* Specifc GX support	*/
+#define CONFIG_4xx		  1	     /* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
+#define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
+#define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
+#undef	CFG_DRAM_TEST			     /* Disable-takes long time!*/
+#define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
+
+#define CONFIG_VERY_BIG_RAM 1
+#define CONFIG_VERSION_VARIABLE
+
+#define CONFIG_IDENT_STRING " Sandburst Metrobox"
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
+#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
+#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor	*/
+#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
+#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
+#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
+#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
+
+#define CFG_NVRAM_BASE_ADDR   (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_FPGA_BASE	      (CFG_PERIPHERAL_BASE + 0x08200000)
+#define CFG_BME32_BASE	      (CFG_PERIPHERAL_BASE + 0x08500000)
+#define CFG_GPIO_BASE	      (CFG_PERIPHERAL_BASE + 0x00000700)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM    1
+#define CFG_OCM_DATA_ADDR     CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address	*/
+#define CFG_INIT_RAM_END      0x2000	     /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
+
+#define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR    (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET    CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
+#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SERIAL_MULTI   1
+#define CONFIG_BAUDRATE	      9600
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
+ * The DS1743 code assumes this condition (i.e. -- it assumes the base
+ * address for the RTC registers is:
+ *
+ *	CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
+#define CONFIG_RTC_DS174x     1		     /* DS1743 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS   1		     /* number of banks		*/
+#define CFG_MAX_FLASH_SECT    8		     /* sectors per device	*/
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
+#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM     1		     /* Use SPD EEPROM for setup*/
+#define SPD_EEPROM_ADDRESS    {0x53}	     /* SPD i2c spd addresses	*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
+#undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
+#define CFG_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
+#define CFG_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
+#define CFG_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
+#define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
+#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
+#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
+
+#define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
+#define CFG_ENV_ADDR	      (CFG_NVRAM_BASE_ADDR)
+
+#define CONFIG_BOOTARGS	      "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none "
+#define CONFIG_BOOTCOMMAND    "tftp 8000000 pImage.metrobox;bootm 8000000"
+#define CONFIG_BOOTDELAY      5		    /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO     1		     /* echo on for serial dnld */
+#define CFG_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
+
+/*-----------------------------------------------------------------------
+ * Networking
+ *----------------------------------------------------------------------*/
+#define CONFIG_MII	      1		     /* MII PHY management	*/
+#define CONFIG_NET_MULTI      1
+#define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
+#define CONFIG_PHY1_ADDR      0xff	     /* no phy on EMAC1		*/
+#define CONFIG_PHY2_ADDR      0x08	     /* PHY addr, MGMT, EMAC2	*/
+#define CONFIG_PHY3_ADDR      0x18	     /* PHY addr, LCL, EMAC3	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_CIS8201_PHY    1		     /* RGMII mode for Cicada	*/
+#define CONFIG_CIS8201_SHORT_ETCH 1	     /* Use short etch mode	*/
+#define CONFIG_PHY_GIGE	      1		     /* GbE speed/duplex detect */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_NETMASK	      255.255.0.0
+#define CONFIG_ETHADDR	      00:00:00:00:00:00 /* No EMAC 0 support	*/
+#define CONFIG_ETH1ADDR	      00:00:00:00:00:00 /* No EMAC 1 support	*/
+#define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
+
+
+/*-----------------------------------------------------------------------
+ * Console/Commands/Parser
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_BEDBUG	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_FAT)
+
+/* tbs 09-March-2005 Removed to be able to use 2nd serial */
+/*				  CFG_CMD_KGDB	  | \ */
+
+
+/* Include NetConsole support */
+#define CONFIG_NETCONSOLE
+
+/* Include auto complete with tabs */
+#define CONFIG_AUTO_COMPLETE 1
+#define CFG_AUTO_COMPLETE    1
+#define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP			     /* undef to save memory	*/
+#define CFG_PROMPT	      "MetroBox=> "  /* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
+#define CFG_PROMPT_HUSH_PS2    "> "
+
+
+/*-----------------------------------------------------------------------
+ * Console Buffer
+ *----------------------------------------------------------------------*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+					     /* Print Buffer Size	*/
+#define CFG_MAXARGS	      16	     /* max number of cmd args	*/
+#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size	*/
+
+/*-----------------------------------------------------------------------
+ * Memory Test
+ *----------------------------------------------------------------------*/
+#define CFG_MEMTEST_START     0x0400000	     /* memtest works on	*/
+#define CFG_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
+
+/*-----------------------------------------------------------------------
+ * Compact Flash (in true IDE mode)
+ *----------------------------------------------------------------------*/
+#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+
+#define CFG_ATA_BASE_ADDR	0xF0000000
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_DATA_OFFSET	0x0000	 /* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
+#define CFG_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
+
+#define CFG_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
+					    to get to the correct offset */
+#define CONFIG_DOS_PARTITION  1		     /* Include dos partition	*/
+
+/*-----------------------------------------------------------------------
+ * PCI
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			     /* include pci support	*/
+#define CONFIG_PCI_PNP			     /* do pci plug-and-play	*/
+#define CONFIG_PCI_SCAN_SHOW		     /* show pci devices	*/
+#define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		     /* enable board pci_pre_init*/
+#define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE	      8192	     /* For IBM 405 CPUs	*/
+#define CFG_CACHELINE_SIZE    32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
+#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
+#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#undef CONFIG_WATCHDOG			     /* watchdog disabled	*/
+#define CFG_LOAD_ADDR	      0x8000000	     /* default load address	*/
+#define CFG_EXTBDINFO	      1		     /* use extended board_info */
+
+#define CFG_HZ		      100	     /* decr freq: 1 ms ticks	*/
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 0af9c68..6c2f17d 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -128,7 +128,7 @@
 #define CONFIG_BAUDRATE		9600	/* STD Baudrate */
 #define CONFIG_BOOTDELAY	5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
-#define CONFIG_BOOT_RETRY_TIME	-10	/* feature is avaiable but not enabled */
+/* #define CONFIG_BOOT_RETRY_TIME	-10	/XXX* feature is available but not enabled */
 #define CONFIG_ZERO_BOOTDELAY_CHECK  	/* check console even if bootdelay = 0 */
 
 #define CONFIG_BOOTCOMMAND	"diskboot 400000 0:1; bootm" /* autoboot command		*/
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 2671125..469d88f 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -32,6 +32,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
+#define CONFIG_IDENT_STRING     " $Name: esd_PCI405_05_07_28 $"
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index dbec242..9ac5715 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -112,7 +112,7 @@
 
 #define CONFIG_BOOTDELAY	5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
-#define CONFIG_BOOT_RETRY_TIME	-10	/* feature is avaiable but not enabled */
+/* #define CONFIG_BOOT_RETRY_TIME	-10	/XXX* feature is available but not enabled */
 #define CONFIG_ZERO_BOOTDELAY_CHECK  	/* check console even if bootdelay = 0 */
 
 
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index bde12e1..3f29190 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -138,7 +138,7 @@
 
 #define CONFIG_BOOTDELAY	5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
-#define CONFIG_BOOT_RETRY_TIME	-10	/* feature is avaiable but not enabled */
+/* #define CONFIG_BOOT_RETRY_TIME	-10	/XXX* feature is available but not enabled */
 #define CONFIG_ZERO_BOOTDELAY_CHECK  	/* check console even if bootdelay = 0 */
 
 #define CONFIG_NETMASK          255.255.255.0
diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index b4dfdf4..5c9950f 100644
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -32,6 +32,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
+#define CONFIG_IDENT_STRING     " $Name:  $"
 
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index 7f9fea5..9da15ed 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -65,6 +65,7 @@
 				CFG_CMD_I2C	| \
 				CFG_CMD_IDE	| \
 				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
 				CFG_CMD_SNTP)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -307,4 +308,21 @@
 
 #define CONFIG_ATAPI            1
 
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI		1
+#define CONFIG_PCI_PNP		1
+#define CONFIG_PCI_SCAN_SHOW	1
+
+#define CONFIG_PCI_MEM_BUS	0x40000000
+#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE	0x10000000
+
+#define CONFIG_PCI_IO_BUS	0x50000000
+#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE	0x01000000
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h
new file mode 100644
index 0000000..a0e1ba7
--- /dev/null
+++ b/include/configs/stxxtc.h
@@ -0,0 +1,592 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
+ * U-Boot port on STx XTc 8xx board
+ * Mostly copied from Panto's NETTA2 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC875		1	/* This is a MPC875 CPU		*/
+#define CONFIG_STXXTC		1	/* ...on a STx XTc  board	*/
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE		38400	/* console baudrate = 38.4kbps	*/
+
+#define CONFIG_XIN		10000000	/* 10 MHz input xtal */
+
+/* Select one of few clock rates defined later in this file.
+*/
+/* #define MPC8XX_HZ		50000000 */
+#define MPC8XX_HZ		66666666
+
+#define CONFIG_8xx_GCLK_FREQ	MPC8XX_HZ
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#undef	CONFIG_CLOCKS_IN_MHZ	/* clocks NOT passsed to Linux in MHz */
+
+#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND							\
+	"tftpboot; " 								\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
+	"bootm"
+
+#define CONFIG_AUTOSCRIPT
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+#define CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
+
+#define CONFIG_BOOTP_MASK		(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE | CONFIG_BOOTP_NISDOMAIN)
+
+#undef CONFIG_MAC_PARTITION
+#undef CONFIG_DOS_PARTITION
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#define	CONFIG_NET_MULTI	1 	/* the only way to get the FEC in */
+#define	FEC_ENET		1	/* eth.c needs it that way... */
+#undef CFG_DISCOVER_PHY
+#define CONFIG_MII		1
+#undef CONFIG_RMII
+
+#define CONFIG_ETHER_ON_FEC1	1
+#define CONFIG_FEC1_PHY		1 	/* phy address of FEC */
+#undef CONFIG_FEC1_PHY_NORXERR
+
+#define CONFIG_ETHER_ON_FEC2	1
+#define CONFIG_FEC2_PHY		3
+#undef CONFIG_FEC2_PHY_NORXERR
+
+#define CONFIG_ENV_OVERWRITE	1	/* allow modification of vendor params */
+
+#define CONFIG_COMMANDS       ( CONFIG_CMD_DFL	| \
+				CFG_CMD_NAND	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING  	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS)
+
+#define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_MISC_INIT_R
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"xtc> "		/* Monitor Command Prompt	*/
+
+#define CFG_HUSH_PARSER	1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0300000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x3000	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#if defined(DEBUG)
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#else
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#endif
+
+/* yes this is weird, I know :) */
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE | 0x00F00000)
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+#define CFG_RESET_ADDRESS	0x80000000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	0x10000
+
+#define	CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00000000)
+#define CFG_ENV_OFFSET		0
+#define	CFG_ENV_SIZE		0x4000
+
+#define CFG_ENV_ADDR_REDUND	(CFG_FLASH_BASE + 0x00010000)
+#define CFG_ENV_OFFSET_REDUND	0
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+
+#define CFG_FLASH_CFI		1
+#define CFG_FLASH_CFI_DRIVER	1
+#undef CFG_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + 0x2000000 }
+
+#define CFG_FLASH_PROTECTION
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ */
+
+#if CONFIG_XIN == 10000000
+
+#if MPC8XX_HZ == 50000000
+#define CFG_PLPRCR	((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#elif MPC8XX_HZ == 66666666
+#define CFG_PLPRCR	((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
+			 (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
+		 	 PLPRCR_TEXPS)
+#else
+#error unsupported CPU freq for XIN = 10MHz
+#endif
+#else
+#error unsupported freq for XIN (must be 10MHz)
+#endif
+
+
+/*
+ *-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ *
+ * Note: When TBS == 0 the timebase is independent of current cpu clock.
+ */
+
+#define SCCR_MASK	SCCR_EBDF11
+#if MPC8XX_HZ > 66666666
+#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00 | SCCR_EBDF01)
+#else
+#define CFG_SCCR	(/* SCCR_TBS     | */ SCCR_CRQEN | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+#endif
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER	0x2002000F*/
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x42000000	/* FLASH bank #1	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+
+#define FLASH_BANK_MAX_SIZE	0x01000000	/* max size per chip */
+
+#define CFG_REMAP_OR_AM		0x80000000
+#define CFG_PRELIM_OR_AM	(0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | OR_SCY_5_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+
+#define CFG_OR1_PRELIM	((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CFG_OR_TIMING_FLASH)
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
+
+/*
+ * BR4 and OR4 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define	SDRAM_MAX_SIZE		(256 << 20)	/* max 256MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	(OR_CSNT_SAM | OR_G5LS)
+
+#define CFG_OR4_PRELIM	((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CFG_OR_TIMING_SDRAM)
+#define CFG_BR4_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+
+#define CFG_MAMR_PTA		 234
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#define CONFIG_LAST_STAGE_INIT		/* needed to reset the damn phys */
+
+/****************************************************************/
+
+#define NAND_SIZE	0x00010000	/* 64K */
+#define NAND_BASE	0xF1000000
+
+/****************************************************************/
+
+/* NAND */
+#define CFG_NAND_BASE		NAND_BASE
+#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_MTD_NAND_UNSAFE
+
+#define CFG_MAX_NAND_DEVICE	1
+#undef NAND_NO_RB
+
+#define SECTORSIZE		512
+#define ADDR_COLUMN		1
+#define ADDR_PAGE		2
+#define ADDR_COLUMN_PAGE	3
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS		1
+#define NAND_MAX_CHIPS		1
+
+/* ALE = PC15, CLE = PB23, CE = PA7, F_RY_BY = PA6 */
+#define NAND_DISABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) |=  (1 << (15 - 7)); \
+	} while(0)
+
+#define NAND_ENABLE_CE(nand) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat) &= ~(1 << (15 - 7)); \
+	} while(0)
+
+#define NAND_CTL_CLRALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) &= ~(1 << (15 - 15)); \
+	} while(0)
+
+#define NAND_CTL_SETALE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat) |=  (1 << (15 - 15)); \
+	} while(0)
+
+#define NAND_CTL_CLRCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) &= ~(1 << (31 - 23)); \
+	} while(0)
+
+#define NAND_CTL_SETCLE(nandptr) \
+	do { \
+		(((volatile immap_t *)CFG_IMMR)->im_cpm.cp_pbdat) |=  (1 << (31 - 23)); \
+	} while(0)
+
+#ifndef NAND_NO_RB
+#define NAND_WAIT_READY(nand) \
+	do { \
+		int _tries = 0; \
+		while ((((volatile immap_t *)CFG_IMMR)->im_ioport.iop_padat & (1 << (15 - 6))) == 0) \
+			if (++_tries > 100000) \
+				break; \
+	} while (0)
+#else
+#define NAND_WAIT_READY(nand) udelay(12)
+#endif
+
+#define WRITE_NAND_COMMAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND_ADDRESS(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define WRITE_NAND(d, adr) \
+	do { \
+		*(volatile unsigned char *)((unsigned long)(adr)) = (unsigned char)(d); \
+	} while(0)
+
+#define READ_NAND(adr) \
+	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
+
+/*****************************************************************************/
+
+#define CFG_DIRECT_FLASH_TFTP
+#define CFG_DIRECT_NAND_TFTP
+
+/*****************************************************************************/
+
+/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
+ * CxOE and CxRESET.  We use the CxOE.
+ */
+#define STATUS_LED_BIT		0x00000080		/* bit 24 */
+
+#define STATUS_LED_PERIOD	(CFG_HZ / 2)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
+#define STATUS_LED_BOOT		0		/* LED 0 used for boot status */
+
+#ifndef __ASSEMBLY__
+
+/* LEDs */
+
+/* led_id_t is unsigned int mask */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
+		else \
+			((volatile immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
+	} while(0)
+
+#define __led_init(msk, st) __led_set(msk, st)
+
+#endif
+
+/******************************************************************************/
+
+#define CFG_CONSOLE_IS_IN_ENV		1
+#define CFG_CONSOLE_OVERWRITE_ROUTINE	1
+#define CFG_CONSOLE_ENV_OVERWRITE	1
+
+/******************************************************************************/
+
+/* use board specific hardware */
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_SHOW_ACTIVITY
+
+/*****************************************************************************/
+
+#define CONFIG_AUTO_COMPLETE	1
+#define CONFIG_CRC32_VERIFY	1
+#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE	1
+
+/* Note: change below for your network setting!!!
+ * This was done just to facilitate manufacturing test and configuration.
+ */
+#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
+
+#define CONFIG_SERVERIP 	192.168.08.1
+#define CONFIG_IPADDR  		192.168.08.85
+#define CONFIG_GATEWAYIP	192.168.08.1
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_HOSTNAME 	stx_xtc
+#define CONFIG_ROOTPATH 	/xtcroot
+#define CONFIG_BOOTFILE 	uImage
+#define CONFIG_LOADADDR		0x1000000
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/ppc440.h b/include/ppc440.h
index 02f0a2e..a5024e6 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -842,7 +842,7 @@
 #define EBC_BXCR_BW_MASK		0x00006000
 #define EBC_BXCR_BW_8BIT		0x00000000
 #define EBC_BXCR_BW_16BIT		0x00002000
-
+#define EBC_BXCR_BW_32BIT		0x00006000
 #define EBC_BXAP_BME_ENABLED		0x80000000
 #define EBC_BXAP_BME_DISABLED		0x00000000
 #define EBC_BXAP_TWT_ENCODE(n)		((((unsigned long)(n))&0xFF)<<23)
diff --git a/include/status_led.h b/include/status_led.h
index b80780a..a56883b 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -336,6 +336,9 @@ void status_led_set  (int led, int state);
 /*****  NetPhone   ********************************************************/
 #elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
 /* XXX empty just to avoid the error */
+/*****  STx XTc    ********************************************************/
+#elif defined(CONFIG_STXXTC)
+/* XXX empty just to avoid the error */
 /*****  sbc8240   ********************************************************/
 #elif defined(CONFIG_WRSBC8240)
 /* XXX empty just to avoid the error */
diff --git a/include/version.h b/include/version.h
index 2b9b617..4f8b498 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 1.1.3"
+#define	U_BOOT_VERSION	"U-Boot 1.1.4"
 
 #endif	/* __VERSION_H__ */