summaryrefslogtreecommitdiff
path: root/include/usb
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-10-30 18:28:01 +0900
committerAnatolij Gustschin <agust@denx.de>2014-10-31 00:38:15 +0100
commit9ea7f3a6d8d0ef9f618e0cb0b785c00cfd5f3183 (patch)
tree301b9265fe3efb86db71b7de2162a65f55a686b3 /include/usb
parent2ed8c878eb781eb572c10789e8108f7cc2957192 (diff)
downloadu-boot-imx-9ea7f3a6d8d0ef9f618e0cb0b785c00cfd5f3183.zip
u-boot-imx-9ea7f3a6d8d0ef9f618e0cb0b785c00cfd5f3183.tar.gz
u-boot-imx-9ea7f3a6d8d0ef9f618e0cb0b785c00cfd5f3183.tar.bz2
Remove unused files
[1] arch/arm/include/asm/arch-at91/at91_shdwn.h The top9000 was the last board to use this header file. It was removed by commit d58a9451e733 (ppc/arm: zap EMK boards). [2] board/matrix_vision/common/* Some Matrix Vision boards were dropped by commit e7a565638a7a (powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7) and commit af55e35d3389 (powerpc: mpc5xxx: remove board support for MVBC_P and MVSMR). Since then these files have been unused. [3] include/usb/omap1510_udc.h The omap5912osk was the last board to use this header file. It was removed by commit 62d636aa2ac2 (omap: remove omap5912osk board support). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-By: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'include/usb')
-rw-r--r--include/usb/omap1510_udc.h174
1 files changed, 0 insertions, 174 deletions
diff --git a/include/usb/omap1510_udc.h b/include/usb/omap1510_udc.h
deleted file mode 100644
index adfbf54..0000000
--- a/include/usb/omap1510_udc.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * Based on
- * linux/drivers/usb/device/bi/omap.h
- * Register definitions for TI OMAP1510 USB bus interface driver
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __USBDCORE_OMAP1510_H__
-#define __USBDCORE_OMAP1510_H__
-
-
-/*
- * 13.2 MPU Register Map
- */
-
-/* Table 13-1. USB Function Module Registers (endpoint) */
-#define UDC_BASE 0xFFFB4000
-#define UDC_OFFSET(offset) (UDC_BASE + (offset))
-#define UDC_REV UDC_OFFSET(0x0) /* Revision */
-#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */
-#define UDC_DATA UDC_OFFSET(0x08) /* Data */
-#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */
-#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */
-#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */
-#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */
-#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */
-#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */
-#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */
-#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */
-#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */
-#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */
-#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */
-#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */
-
-/* IRQ_EN register fields */
-#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */
-#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */
-#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */
-#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */
-#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */
-
-/* IRQ_SRC register fields */
-#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */
-#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */
-#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */
-#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */
-#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */
-#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */
-#define UDC_DS_Chg (1 << 3) /* Device state changed */
-#define UDC_Setup (1 << 2) /* Setup transaction */
-#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */
-#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */
-
-/* DEVSTAT register fields, 14.2.9 */
-#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */
-#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */
-#define UDC_SUS (1 << 4) /* Suspended state */
-#define UDC_CFG (1 << 3) /* Configured state */
-#define UDC_ADD (1 << 2) /* Addressed state */
-#define UDC_DEF (1 << 1) /* Default state */
-#define UDC_ATT (1 << 0) /* Attached state */
-
-/* SYSCON1 register fields */
-#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */
-#define UDC_Nak_En (1 << 4) /* NAK enable */
-#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */
-#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */
-#define UDC_Pullup_En (1 << 0) /* External pullup enabled */
-
-/* SYSCON2 register fields */
-#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */
-#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */
-#define UDC_Dev_Cfg (1 << 3) /* Device configured */
-#define UDC_Clr_Cfg (1 << 2) /* Clear configured */
-
-/*
- * Select and enable endpoints
- */
-
-/* Table 13-1. USB Function Module Registers (endpoint configuration) */
-#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */
-#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */
-#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */
-#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4)
-#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */
-#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4)
-
-/* EP_NUM register fields */
-#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */
-#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */
-#define UDC_EP_Dir (1 << 4) /* Endpoint direction */
-
-/* CTRL register fields */
-#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */
-#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */
-#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */
-#define UDC_Clr_EP (1 << 1) /* Clear endpoint */
-#define UDC_Reset_EP (1 << 0) /* Reset endpoint */
-
-/* STAT_FLG register fields */
-#define UDC_Miss_In (1 << 14)
-#define UDC_Data_Flush (1 << 13)
-#define UDC_ISO_Err (1 << 12)
-#define UDC_ISO_FIFO_Empty (1 << 9)
-#define UDC_ISO_FIFO_Full (1 << 8)
-#define UDC_EP_Halted (1 << 6)
-#define UDC_STALL (1 << 5)
-#define UDC_NAK (1 << 4)
-#define UDC_ACK (1 << 3)
-#define UDC_FIFO_En (1 << 2)
-#define UDC_Non_ISO_FIFO_Empty (1 << 1)
-#define UDC_Non_ISO_FIFO_Full (1 << 0)
-
-/* EPn_RX register fields */
-#define UDC_EPn_RX_Valid (1 << 15) /* valid */
-#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */
-#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */
-
-/* EPn_TX register fields */
-#define UDC_EPn_TX_Valid (1 << 15) /* valid */
-#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */
-#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */
-
-#define EP0_PACKETSIZE 0x40
-
-/* physical to logical endpoint mapping
- * Physical endpoints are an index into device->bus->endpoint_array.
- * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in
- * the USB specification.
- *
- * physical ep logical ep direction endpoint_address
- * 0 0 IN and OUT 0x00
- * 1 to 15 1 to 15 OUT 0x01 to 0x0f
- * 16 to 30 1 to 15 IN 0x81 to 0x8f
- */
-#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80))
-#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a))
-
-/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */
-#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17)
-
-/* Other registers (may be) related to USB */
-
-#define CLOCK_CTRL (0xFFFE0830)
-#define APLL_CTRL (0xFFFE084C)
-#define DPLL_CTRL (0xFFFE083C)
-#define SOFT_REQ (0xFFFE0834)
-#define STATUS_REQ (0xFFFE0840)
-
-/* FUNC_MUX_CTRL_0 bits related to USB */
-#define UDC_VBUS_CTRL (1 << 19)
-#define UDC_VBUS_MODE (1 << 18)
-
-/* OMAP Endpoint parameters */
-#define UDC_OUT_PACKET_SIZE 64
-#define UDC_IN_PACKET_SIZE 64
-#define UDC_INT_PACKET_SIZE 16
-#define UDC_BULK_PACKET_SIZE 16
-
-#define UDC_INT_ENDPOINT 5
-#define UDC_OUT_ENDPOINT 2
-#define UDC_IN_ENDPOINT 1
-
-#endif