tsec: Convert tsec to use PHY Lib

This converts tsec to use the new PHY Lib.  All of the old PHY support
is ripped out.  The old MDIO driver is split off, and placed in
fsl_mdio.c.  The initialization is modified to initialize the MDIO
driver as well.  The powerpc config file is modified to configure PHYLIB
if TSEC_ENET is configured.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Detlev Zundel <dzu@denx.de>

1 files changed, 23 insertions, 275 deletions

diff --git a/include/tsec.h b/include/tsec.h
index a066d97..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -19,30 +19,36 @@
 
 #include <net.h>
 #include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
 
 #define TSEC_SIZE 		0x01000
 #define TSEC_MDIO_OFFSET	0x01000
 
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
 #define STD_TSEC_INFO(num) \
 {			\
 	.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
-	.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
-	.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					 + (num - 1) * TSEC_MDIO_OFFSET), \
 	.devname = CONFIG_TSEC##num##_NAME, \
 	.phyaddr = TSEC##num##_PHY_ADDR, \
-	.flags = TSEC##num##_FLAGS \
+	.flags = TSEC##num##_FLAGS, \
+	.mii_devname = DEFAULT_MII_NAME \
 }
 
 #define SET_STD_TSEC_INFO(x, num) \
 {			\
 	x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
-	x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
-	x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+	x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
 					  + (num - 1) * TSEC_MDIO_OFFSET); \
 	x.devname = CONFIG_TSEC##num##_NAME; \
 	x.phyaddr = TSEC##num##_PHY_ADDR; \
 	x.flags = TSEC##num##_FLAGS;\
+	x.mii_devname = DEFAULT_MII_NAME;\
 }
 
 #define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
 #define TSEC_TIMEOUT 1000
 #define TOUT_LOOP	1000000
 
-#define PHY_AUTONEGOTIATE_TIMEOUT	5000 /* in ms */
-
 /* TBI register addresses */
 #define TBI_CR			0x00
 #define TBI_SR			0x01
@@ -96,204 +100,14 @@
 
 #define ECNTRL_INIT_SETTINGS	0x00001000
 #define ECNTRL_TBI_MODE		0x00000020
+#define ECNTRL_REDUCED_MODE	0x00000010
 #define ECNTRL_R100		0x00000008
+#define ECNTRL_REDUCED_MII_MODE	0x00000004
 #define ECNTRL_SGMII_MODE	0x00000002
 
-#define miim_end -2
-#define miim_read -1
-
 #ifndef CONFIG_SYS_TBIPA_VALUE
     #define CONFIG_SYS_TBIPA_VALUE	0x1f
 #endif
-#define MIIMCFG_INIT_VALUE	0x00000003
-#define MIIMCFG_RESET		0x80000000
-
-#define MIIMIND_BUSY		0x00000001
-#define MIIMIND_NOTVALID	0x00000004
-
-#define MIIM_CONTROL		0x00
-#define MIIM_CONTROL_RESET	0x00009140
-#define MIIM_CONTROL_INIT	0x00001140
-#define MIIM_CONTROL_RESTART	0x00001340
-#define MIIM_ANEN		0x00001000
-
-#define MIIM_CR			0x00
-#define MIIM_CR_RST		0x00008000
-#define MIIM_CR_INIT		0x00001000
-
-#define MIIM_STATUS		0x1
-#define MIIM_STATUS_AN_DONE	0x00000020
-#define MIIM_STATUS_LINK	0x0004
-
-#define MIIM_PHYIR1		0x2
-#define MIIM_PHYIR2		0x3
-
-#define MIIM_ANAR		0x4
-#define MIIM_ANAR_INIT		0x1e1
-
-#define MIIM_TBI_ANLPBPA	0x5
-#define MIIM_TBI_ANLPBPA_HALF	0x00000040
-#define MIIM_TBI_ANLPBPA_FULL	0x00000020
-
-#define MIIM_TBI_ANEX		0x6
-#define MIIM_TBI_ANEX_NP	0x00000004
-#define MIIM_TBI_ANEX_PRX	0x00000002
-
-#define MIIM_GBIT_CONTROL	0x9
-#define MIIM_GBIT_CONTROL_INIT	0xe00
-
-#define MIIM_EXT_PAGE_ACCESS	0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL			0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val)	((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS			0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK	0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT	8
-
-#define MIIM_BCM54XX_SHD	0x1c	/* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE	0x8000
-#define MIIM_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data)	\
-	(MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
-	 MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT	0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT	0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED	0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT	0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100	0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1		0x17
-#define MIIM_CIS8201_EXTCON1_INIT	0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON		0x17
-#define MIIM_CIS8204_EPHYCON_INIT	0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII	0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON		0x1b
-#define MIIM_CIS8204_SLEDCON_INIT	0x1115
-
-#define MIIM_GBIT_CON		0x09
-#define MIIM_GBIT_CON_ADVERT	0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT	0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT	0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX	0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED	0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT	0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100	0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK	0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON		0x17
-#define MIIM_VSC8244_EPHYCON_INIT	0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON		0x1b
-#define MIIM_VSC8244_LEDCON_INIT	0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON		0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW	0x1120
-#define MIIM_VSC8601_SKEW_CTRL		0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS		0x11
-#define MIIM_88E1011_PHYSTAT_SPEED	0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT	0x8000
-#define MIIM_88E1011_PHYSTAT_100	0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX	0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE	0x0800
-#define MIIM_88E1011_PHYSTAT_LINK	0x0400
-
-#define MIIM_88E1011_PHY_SCR		0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO	0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL	24
-#define MIIM_88E1111_PHY_LED_DIRECT	0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE	0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL	16
-#define MIIM_88E1121_PHY_LED_PAGE	3
-#define MIIM_88E1121_PHY_LED_DEF	0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN		18
-#define MIIM_88E1121_PHY_IRQ_STATUS	19
-
-#define MIIM_88E1121_PHY_PAGE		22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY	0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY	0x0002
-
-#define MIIM_88E1145_PHY_PAGE	29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS	0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED	0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT	0x8000
-#define MIIM_RTL8211B_PHYSTAT_100	0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX	0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE	0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK	0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP	0x0400
-#define MIIM_DM9161_CR_RSTAN	0x1200
-
-#define MIIM_DM9161_SCR		0x10
-#define MIIM_DM9161_SCR_INIT	0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR	0x11
-#define MIIM_DM9161_SCSR_100F	0x8000
-#define MIIM_DM9161_SCSR_100H	0x4000
-#define MIIM_DM9161_SCSR_10F	0x2000
-#define MIIM_DM9161_SCSR_10H	0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR	0x12
-#define MIIM_DM9161_10BTCSR_INIT	0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2		     0x11  /* Status Register 2  */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX	   0x0000  /*  10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX	   0x0200  /*  10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX	   0x4000  /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX	   0x4200  /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT	0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR	0x11
-#define MIIM_DP83865_SPD_MASK	0x0018
-#define MIIM_DP83865_SPD_1000	0x0010
-#define MIIM_DP83865_SPD_100	0x0008
-#define MIIM_DP83865_DPX_FULL	0x0002
-
-#define MIIM_READ_COMMAND	0x00000001
 
 #define MRBLR_INIT_SETTINGS	PKTSIZE_ALIGN
 
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
 	uint	res2[24];
 } tsec_hash_t;
 
-typedef struct tsec_mdio {
-	uint	res1[4];
-	uint	ieventm;
-	uint	imaskm;
-	uint	res2;
-	uint	emapm;
-	uint	res3[320];
-	uint	miimcfg;	/* MII Management: Configuration */
-	uint	miimcom;	/* MII Management: Command */
-	uint	miimadd;	/* MII Management: Address */
-	uint	miimcon;	/* MII Management: Control */
-	uint	miimstat;	/* MII Management: Status */
-	uint	miimind;	/* MII Management: Indicators */
-	uint	res4[690];
-} tsec_mdio_t;
-
 typedef struct tsec
 {
 	/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
 	uint	resc00[256];
 } tsec_t;
 
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
 
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
 #define TSEC_REDUCED	(1 << 1)	/* MAC-PHY interface uses RGMII */
 #define TSEC_SGMII	(1 << 2)	/* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER	(1 << 3)	/* PHY uses fiber, eg 1000 Base-X */
 
 struct tsec_private {
 	tsec_t *regs;
-	tsec_mdio_t *phyregs;
-	tsec_mdio_t *phyregs_sgmii;
-	struct phy_info *phyinfo;
+	struct tsec_mii_mng *phyregs_sgmii;
+	struct phy_device *phydev;
+	phy_interface_t interface;
+	struct mii_dev *bus;
 	uint phyaddr;
+	char mii_devname[16];
 	u32 flags;
-	uint link;
-	uint duplexity;
-	uint speed;
-};
-
-
-/*
- * struct phy_cmd:  A command for reading or writing a PHY register
- *
- * mii_reg:  The register to read or write
- *
- * mii_data:  For writes, the value to put in the register.
- *	A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- *	For reads, this function will be passed the value read
- *	from the PHY, and process it.
- *	For writes, the result of this function will be written
- *	to the PHY register
- */
-struct phy_cmd {
-	uint mii_reg;
-	uint mii_data;
-	uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY.  During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is.  The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
-	uint id;
-	char *name;
-	uint shift;
-	/* Called to configure the PHY, and modify the controller
-	 * based on the results */
-	struct phy_cmd *config;
-
-	/* Called when starting up the controller */
-	struct phy_cmd *startup;
-
-	/* Called when bringing down the controller */
-	struct phy_cmd *shutdown;
 };
 
 struct tsec_info_struct {
 	tsec_t *regs;
-	tsec_mdio_t *miiregs;
-	tsec_mdio_t *miiregs_sgmii;
+	struct tsec_mii_mng *miiregs_sgmii;
 	char *devname;
+	char *mii_devname;
+	phy_interface_t interface;
 	unsigned int phyaddr;
 	u32 flags;
 };