Merge branch 'master' of git://git.denx.de/u-boot-arm

Albert's rework of the linker scripts conflicted with Simon's making
everyone use __bss_end.  We also had a minor conflict over
README.scrapyard being added to in mainline and enhanced in
u-boot-arm/master with proper formatting.

Conflicts:
	arch/arm/cpu/ixp/u-boot.lds
	arch/arm/cpu/u-boot.lds
	arch/arm/lib/Makefile
	board/actux1/u-boot.lds
	board/actux2/u-boot.lds
	board/actux3/u-boot.lds
	board/dvlhost/u-boot.lds
	board/freescale/mx31ads/u-boot.lds
	doc/README.scrapyard
	include/configs/tegra-common.h

Build tested for all of ARM and run-time tested on am335x_evm.

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 0 insertions, 125 deletions

diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h
deleted file mode 100644
index 9485338..0000000
--- a/include/ns9750_bbus.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Definitions for BBus usage
- * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- ***********************************************************************/
-
-#ifndef FS_NS9750_BBUS_H
-#define FS_NS9750_BBUS_H
-
-#define NS9750_BBUS_MODULE_BASE		(0x90600000)
-
-#define get_bbus_reg_addr(c) \
-	((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c)))
-
-/* We have support for 50 GPIO pins */
-
-#define get_gpio_cfg_reg_addr(pin) \
-	get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) )
-
-/* To Read/Modify/Write a pin configuration register, use it like
-   set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT );
-   They should be wrapped by cli()/sti() */
-#define set_gpio_cfg_reg_val(pin,cfg) \
-	*get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \
-					~NS9750_GPIO_CFG_MASK((pin))) |\
-				NS9750_GPIO_CFG_VAL((pin),(cfg));
-
-#define NS9750_GPIO_CFG_MASK(pin)	(NS9750_GPIO_CFG_VAL(pin, \
-					 NS9750_GPIO_CFG_MA))
-#define NS9750_GPIO_CFG_VAL(pin,cfg)	((cfg) << (((pin) % 8) * 4))
-
-#define NS9750_GPIO_CFG_MA		(0x0F)
-#define NS9750_GPIO_CFG_INPUT		(0x00)
-#define NS9750_GPIO_CFG_OUTPUT		(0x08)
-#define NS9750_GPIO_CFG_FUNC_GPIO	(0x03)
-#define NS9750_GPIO_CFG_FUNC_2		(0x02)
-#define NS9750_GPIO_CFG_FUNC_1		(0x01)
-#define NS9750_GPIO_CFG_FUNC_0		(0x00)
-
-/* the register addresses */
-
-#define NS9750_BBUS_MASTER_RESET	(0x00)
-#define NS9750_BBUS_GPIO_CFG_BASE	(0x10)
-#define NS9750_BBUS_GPIO_CTRL_BASE	(0x30)
-#define NS9750_BBUS_GPIO_STAT_BASE	(0x40)
-#define NS9750_BBUS_MONITOR		(0x50)
-#define NS9750_BBUS_DMA_INT_STAT	(0x60)
-#define NS9750_BBUS_DMA_INT_ENABLE	(0x64)
-#define NS9750_BBUS_USB_CFG		(0x70)
-#define NS9750_BBUS_ENDIAN_CFG		(0x80)
-#define NS9750_BBUS_ARM_WAKE_UP		(0x90)
-
-/* register bit fields */
-
-#define NS9750_BBUS_MASTER_RESET_UTIL	(0x00000100)
-#define NS9750_BBUS_MASTER_RESET_I2C	(0x00000080)
-#define NS9750_BBUS_MASTER_RESET_1284	(0x00000040)
-#define NS9750_BBUS_MASTER_RESET_SER4	(0x00000020)
-#define NS9750_BBUS_MASTER_RESET_SER3	(0x00000010)
-#define NS9750_BBUS_MASTER_RESET_SER2	(0x00000008)
-#define NS9750_BBUS_MASTER_RESET_SER1	(0x00000004)
-#define NS9750_BBUS_MASTER_RESET_USB	(0x00000002)
-#define NS9750_BBUS_MASTER_RESET_DMA	(0x00000001)
-
-/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */
-
-#define NS9750_BBUS_DMA_INT_BINT16	(0x00010000)
-#define NS9750_BBUS_DMA_INT_BINT15	(0x00008000)
-#define NS9750_BBUS_DMA_INT_BINT14	(0x00004000)
-#define NS9750_BBUS_DMA_INT_BINT13	(0x00002000)
-#define NS9750_BBUS_DMA_INT_BINT12	(0x00001000)
-#define NS9750_BBUS_DMA_INT_BINT11	(0x00000800)
-#define NS9750_BBUS_DMA_INT_BINT10	(0x00000400)
-#define NS9750_BBUS_DMA_INT_BINT9	(0x00000200)
-#define NS9750_BBUS_DMA_INT_BINT8	(0x00000100)
-#define NS9750_BBUS_DMA_INT_BINT7	(0x00000080)
-#define NS9750_BBUS_DMA_INT_BINT6	(0x00000040)
-#define NS9750_BBUS_DMA_INT_BINT5	(0x00000020)
-#define NS9750_BBUS_DMA_INT_BINT4	(0x00000010)
-#define NS9750_BBUS_DMA_INT_BINT3	(0x00000008)
-#define NS9750_BBUS_DMA_INT_BINT2	(0x00000004)
-#define NS9750_BBUS_DMA_INT_BINT1	(0x00000002)
-#define NS9750_BBUS_DMA_INT_BINT0	(0x00000001)
-
-#define NS9750_BBUS_USB_CFG_OUTEN	(0x00000008)
-#define NS9750_BBUS_USB_CFG_SPEED	(0x00000004)
-#define NS9750_BBUS_USB_CFG_CFG_MA	(0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003)
-#define NS9750_BBUS_USB_CFG_CFG_DEVICE	(0x00000002)
-#define NS9750_BBUS_USB_CFG_CFG_HOST	(0x00000001)
-#define NS9750_BBUS_USB_CFG_CFG_DIS	(0x00000000)
-
-#define NS9750_BBUS_ENDIAN_CFG_AHBM	(0x00001000)
-#define NS9750_BBUS_ENDIAN_CFG_I2C	(0x00000080)
-#define NS9750_BBUS_ENDIAN_CFG_IEEE1284	(0x00000040)
-#define NS9750_BBUS_ENDIAN_CFG_SER4	(0x00000020)
-#define NS9750_BBUS_ENDIAN_CFG_SER3	(0x00000010)
-#define NS9750_BBUS_ENDIAN_CFG_SER2	(0x00000008)
-#define NS9750_BBUS_ENDIAN_CFG_SER1	(0x00000004)
-#define NS9750_BBUS_ENDIAN_CFG_USB	(0x00000002)
-#define NS9750_BBUS_ENDIAN_CFG_DMA	(0x00000001)
-
-#endif /* FS_NS9750_BBUS_H */