ARM: kirkwood: add mvsdio driver

This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.

Signed-off-by: Gerald Kerma <drEagle@doukki.net>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>

1 files changed, 278 insertions, 0 deletions

diff --git a/include/mvebu_mmc.h b/include/mvebu_mmc.h
new file mode 100644
index 0000000..28d98fe
--- /dev/null
+++ b/include/mvebu_mmc.h
@@ -0,0 +1,278 @@
+/*
+ * Marvell MMC/SD/SDIO driver
+ *
+ * (C) Copyright 2012
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Maen Suleiman, Gerald Kerma
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __MVEBU_MMC_H__
+#define __MVEBU_MMC_H__
+
+/* needed for the mmc_cfg definition */
+#include <mmc.h>
+
+#define MMC_BLOCK_SIZE				512
+
+/*
+ * Clock rates
+ */
+
+#define MVEBU_MMC_CLOCKRATE_MAX			50000000
+#define MVEBU_MMC_BASE_DIV_MAX			0x7ff
+#define MVEBU_MMC_BASE_FAST_CLOCK		CONFIG_SYS_TCLK
+#define MVEBU_MMC_BASE_FAST_CLK_100		100000000
+#define MVEBU_MMC_BASE_FAST_CLK_200		200000000
+
+/* SDIO register */
+#define SDIO_SYS_ADDR_LOW			0x000
+#define SDIO_SYS_ADDR_HI			0x004
+#define SDIO_BLK_SIZE				0x008
+#define SDIO_BLK_COUNT				0x00c
+#define SDIO_ARG_LOW				0x010
+#define SDIO_ARG_HI				0x014
+#define SDIO_XFER_MODE				0x018
+#define SDIO_CMD				0x01c
+#define SDIO_RSP(i)				(0x020 + ((i)<<2))
+#define SDIO_RSP0				0x020
+#define SDIO_RSP1				0x024
+#define SDIO_RSP2				0x028
+#define SDIO_RSP3				0x02c
+#define SDIO_RSP4				0x030
+#define SDIO_RSP5				0x034
+#define SDIO_RSP6				0x038
+#define SDIO_RSP7				0x03c
+#define SDIO_BUF_DATA_PORT			0x040
+#define SDIO_RSVED				0x044
+#define SDIO_HW_STATE				0x048
+#define SDIO_PRESENT_STATE0			0x048
+#define SDIO_PRESENT_STATE1			0x04c
+#define SDIO_HOST_CTRL				0x050
+#define SDIO_BLK_GAP_CTRL			0x054
+#define SDIO_CLK_CTRL				0x058
+#define SDIO_SW_RESET				0x05c
+#define SDIO_NOR_INTR_STATUS			0x060
+#define SDIO_ERR_INTR_STATUS			0x064
+#define SDIO_NOR_STATUS_EN			0x068
+#define SDIO_ERR_STATUS_EN			0x06c
+#define SDIO_NOR_INTR_EN			0x070
+#define SDIO_ERR_INTR_EN			0x074
+#define SDIO_AUTOCMD12_ERR_STATUS		0x078
+#define SDIO_CURR_BYTE_LEFT			0x07c
+#define SDIO_CURR_BLK_LEFT			0x080
+#define SDIO_AUTOCMD12_ARG_LOW			0x084
+#define SDIO_AUTOCMD12_ARG_HI			0x088
+#define SDIO_AUTOCMD12_INDEX			0x08c
+#define SDIO_AUTO_RSP(i)			(0x090 + ((i)<<2))
+#define SDIO_AUTO_RSP0				0x090
+#define SDIO_AUTO_RSP1				0x094
+#define SDIO_AUTO_RSP2				0x098
+#define SDIO_CLK_DIV				0x128
+
+#define WINDOW_CTRL(i)				(0x108 + ((i) << 3))
+#define WINDOW_BASE(i)				(0x10c + ((i) << 3))
+
+/* SDIO_PRESENT_STATE */
+#define CARD_BUSY				(1 << 1)
+#define CMD_INHIBIT				(1 << 0)
+#define CMD_TXACTIVE				(1 << 8)
+#define CMD_RXACTIVE				(1 << 9)
+#define CMD_AUTOCMD12ACTIVE			(1 << 14)
+#define CMD_BUS_BUSY				(CMD_AUTOCMD12ACTIVE |	\
+						CMD_RXACTIVE |	\
+						CMD_TXACTIVE |	\
+						CMD_INHIBIT |	\
+						CARD_BUSY)
+
+/*
+ * SDIO_CMD
+ */
+
+#define SDIO_CMD_RSP_NONE			(0 << 0)
+#define SDIO_CMD_RSP_136			(1 << 0)
+#define SDIO_CMD_RSP_48				(2 << 0)
+#define SDIO_CMD_RSP_48BUSY			(3 << 0)
+
+#define SDIO_CMD_CHECK_DATACRC16		(1 << 2)
+#define SDIO_CMD_CHECK_CMDCRC			(1 << 3)
+#define SDIO_CMD_INDX_CHECK			(1 << 4)
+#define SDIO_CMD_DATA_PRESENT			(1 << 5)
+#define SDIO_UNEXPECTED_RESP			(1 << 7)
+
+#define SDIO_CMD_INDEX(x)			((x) << 8)
+
+/*
+ * SDIO_XFER_MODE
+ */
+
+#define SDIO_XFER_MODE_STOP_CLK			(1 << 5)
+#define SDIO_XFER_MODE_HW_WR_DATA_EN		(1 << 1)
+#define SDIO_XFER_MODE_AUTO_CMD12		(1 << 2)
+#define SDIO_XFER_MODE_INT_CHK_EN		(1 << 3)
+#define SDIO_XFER_MODE_TO_HOST			(1 << 4)
+#define SDIO_XFER_MODE_DMA			(0 << 6)
+
+/*
+ * SDIO_HOST_CTRL
+ */
+
+#define SDIO_HOST_CTRL_PUSH_PULL_EN		(1 << 0)
+
+#define SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY	(0 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_ONLY	(1 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO	(2 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_IO_MMC		(3 << 1)
+#define SDIO_HOST_CTRL_CARD_TYPE_MASK		(3 << 1)
+
+#define SDIO_HOST_CTRL_BIG_ENDIAN		(1 << 3)
+#define SDIO_HOST_CTRL_LSB_FIRST		(1 << 4)
+#define SDIO_HOST_CTRL_DATA_WIDTH_1_BIT		(0 << 9)
+#define SDIO_HOST_CTRL_DATA_WIDTH_4_BITS	(1 << 9)
+#define SDIO_HOST_CTRL_HI_SPEED_EN		(1 << 10)
+
+#define SDIO_HOST_CTRL_TMOUT_MAX		0xf
+#define SDIO_HOST_CTRL_TMOUT_MASK		(0xf << 11)
+#define SDIO_HOST_CTRL_TMOUT(x)			((x) << 11)
+#define SDIO_HOST_CTRL_TMOUT_EN			(1 << 15)
+
+/*
+ * SDIO_SW_RESET
+ */
+
+#define SDIO_SW_RESET_NOW			(1 << 8)
+
+/*
+ * Normal interrupt status bits
+ */
+
+#define SDIO_NOR_ERROR				(1 << 15)
+#define SDIO_NOR_UNEXP_RSP			(1 << 14)
+#define SDIO_NOR_AUTOCMD12_DONE			(1 << 13)
+#define SDIO_NOR_SUSPEND_ON			(1 << 12)
+#define SDIO_NOR_LMB_FF_8W_AVAIL		(1 << 11)
+#define SDIO_NOR_LMB_FF_8W_FILLED		(1 << 10)
+#define SDIO_NOR_READ_WAIT_ON			(1 << 9)
+#define SDIO_NOR_CARD_INT			(1 << 8)
+#define SDIO_NOR_READ_READY			(1 << 5)
+#define SDIO_NOR_WRITE_READY			(1 << 4)
+#define SDIO_NOR_DMA_INI			(1 << 3)
+#define SDIO_NOR_BLK_GAP_EVT			(1 << 2)
+#define SDIO_NOR_XFER_DONE			(1 << 1)
+#define SDIO_NOR_CMD_DONE			(1 << 0)
+
+/*
+ * Error status bits
+ */
+
+#define SDIO_ERR_CRC_STATUS			(1 << 14)
+#define SDIO_ERR_CRC_STARTBIT			(1 << 13)
+#define SDIO_ERR_CRC_ENDBIT			(1 << 12)
+#define SDIO_ERR_RESP_TBIT			(1 << 11)
+#define SDIO_ERR_XFER_SIZE			(1 << 10)
+#define SDIO_ERR_CMD_STARTBIT			(1 << 9)
+#define SDIO_ERR_AUTOCMD12			(1 << 8)
+#define SDIO_ERR_DATA_ENDBIT			(1 << 6)
+#define SDIO_ERR_DATA_CRC			(1 << 5)
+#define SDIO_ERR_DATA_TIMEOUT			(1 << 4)
+#define SDIO_ERR_CMD_INDEX			(1 << 3)
+#define SDIO_ERR_CMD_ENDBIT			(1 << 2)
+#define SDIO_ERR_CMD_CRC			(1 << 1)
+#define SDIO_ERR_CMD_TIMEOUT			(1 << 0)
+/* enable all for polling */
+#define SDIO_POLL_MASK				0xffff
+
+/*
+ * CMD12 error status bits
+ */
+
+#define SDIO_AUTOCMD12_ERR_NOTEXE		(1 << 0)
+#define SDIO_AUTOCMD12_ERR_TIMEOUT		(1 << 1)
+#define SDIO_AUTOCMD12_ERR_CRC			(1 << 2)
+#define SDIO_AUTOCMD12_ERR_ENDBIT		(1 << 3)
+#define SDIO_AUTOCMD12_ERR_INDEX		(1 << 4)
+#define SDIO_AUTOCMD12_ERR_RESP_T_BIT		(1 << 5)
+#define SDIO_AUTOCMD12_ERR_RESP_STARTBIT	(1 << 6)
+
+#define MMC_RSP_PRESENT				(1 << 0)
+/* 136 bit response */
+#define MMC_RSP_136				(1 << 1)
+/* expect valid crc */
+#define MMC_RSP_CRC				(1 << 2)
+/* card may send busy */
+#define MMC_RSP_BUSY				(1 << 3)
+/* response contains opcode */
+#define MMC_RSP_OPCODE				(1 << 4)
+
+#define MMC_BUSMODE_OPENDRAIN			1
+#define MMC_BUSMODE_PUSHPULL			2
+
+#define MMC_BUS_WIDTH_1				0
+#define MMC_BUS_WIDTH_4				2
+#define MMC_BUS_WIDTH_8				3
+
+/* Can the host do 4 bit transfers */
+#define MMC_CAP_4_BIT_DATA			(1 << 0)
+/* Can do MMC high-speed timing */
+#define MMC_CAP_MMC_HIGHSPEED			(1 << 1)
+/* Can do SD high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED			(1 << 2)
+/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SDIO_IRQ			(1 << 3)
+/* Talks only SPI protocols */
+#define MMC_CAP_SPI				(1 << 4)
+/* Needs polling for card-detection */
+#define MMC_CAP_NEEDS_POLL			(1 << 5)
+/* Can the host do 8 bit transfers */
+#define MMC_CAP_8_BIT_DATA			(1 << 6)
+
+/* Nonremovable e.g. eMMC */
+#define MMC_CAP_NONREMOVABLE			(1 << 8)
+/* Waits while card is busy */
+#define MMC_CAP_WAIT_WHILE_BUSY			(1 << 9)
+/* Allow erase/trim commands */
+#define MMC_CAP_ERASE				(1 << 10)
+/* can support DDR mode at 1.8V */
+#define MMC_CAP_1_8V_DDR			(1 << 11)
+/* can support DDR mode at 1.2V */
+#define MMC_CAP_1_2V_DDR			(1 << 12)
+/* Can power off after boot */
+#define MMC_CAP_POWER_OFF_CARD			(1 << 13)
+/* CMD14/CMD19 bus width ok */
+#define MMC_CAP_BUS_WIDTH_TEST			(1 << 14)
+/* Host supports UHS SDR12 mode */
+#define MMC_CAP_UHS_SDR12			(1 << 15)
+/* Host supports UHS SDR25 mode */
+#define MMC_CAP_UHS_SDR25			(1 << 16)
+/* Host supports UHS SDR50 mode */
+#define MMC_CAP_UHS_SDR50			(1 << 17)
+/* Host supports UHS SDR104 mode */
+#define MMC_CAP_UHS_SDR104			(1 << 18)
+/* Host supports UHS DDR50 mode */
+#define MMC_CAP_UHS_DDR50			(1 << 19)
+/* Host supports Driver Type A */
+#define MMC_CAP_DRIVER_TYPE_A			(1 << 23)
+/* Host supports Driver Type C */
+#define MMC_CAP_DRIVER_TYPE_C			(1 << 24)
+/* Host supports Driver Type D */
+#define MMC_CAP_DRIVER_TYPE_D			(1 << 25)
+/* CMD23 supported. */
+#define MMC_CAP_CMD23				(1 << 30)
+/* Hardware reset */
+#define MMC_CAP_HW_RESET			(1 << 31)
+
+struct mvebu_mmc_cfg {
+	u32	mvebu_mmc_base;
+	u32	mvebu_mmc_clk;
+	u8	max_bus_width;
+	struct mmc_config cfg;
+};
+
+/*
+ * Functions prototypes
+ */
+
+int mvebu_mmc_init(bd_t *bis);
+
+#endif /* __MVEBU_MMC_H__ */