summaryrefslogtreecommitdiff
path: root/include/mmc.h
diff options
context:
space:
mode:
authorMarkus Niebel <Markus.Niebel@tqs.de>2013-12-16 13:40:46 +0100
committerPantelis Antoniou <panto@antoniou-consulting.com>2014-01-09 11:47:51 +0200
commitab71188ce87ebb66192a5bdbbb9d58052bd32d93 (patch)
treed10e2d7d55b842b124087ee019d00d02f9a0af22 /include/mmc.h
parent30e6d979fa9da56a5badcb981cdddd58638d3375 (diff)
downloadu-boot-imx-ab71188ce87ebb66192a5bdbbb9d58052bd32d93.zip
u-boot-imx-ab71188ce87ebb66192a5bdbbb9d58052bd32d93.tar.gz
u-boot-imx-ab71188ce87ebb66192a5bdbbb9d58052bd32d93.tar.bz2
mmc: add setdsr support
The eMMC and the SD-Card specifications describe the optional SET_DSR command. During measurements at our lab we found that some cards implementing this feature having really strong driver strengts per default. This can lead to voltage peaks above the specification of the host on signal edges for data sent from a card to the host. Since availability of a given card type may be shorter than the time a certain hardware will be produced it is useful to have support for this command (Alternative would be changing termination resistors and adapting the driver strength of the host to the used card.) Following proposal for an implementation: - new field that reflects CSD field DSR_IMP in struct mmc - new field for design specific DSR value in struct mmc - board code can set DSR value in mmc struct just after registering an controller - mmc_startup sends the the stored DSR value before selecting a card, if DSR_IMP is set Additionally the mmc command is extended to make is possible to play around with different DSR values. The concept was tested on a i.MX53 based platform using a Micron eMMC card where the default DSR is 0x0400 (12mA) but in our design 0x0100 (0x0100) were enough. To use this feature for instance on a mx53loco one have to add a call to mmc_set_dsr() in board_mmc_init() after calling fsl_esdhc_initialize() for the eMMC. Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Diffstat (limited to 'include/mmc.h')
-rw-r--r--include/mmc.h3
1 files changed, 3 insertions, 0 deletions
diff --git a/include/mmc.h b/include/mmc.h
index 8f51c93..e1060b9 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -262,6 +262,8 @@ struct mmc {
uint card_caps;
uint host_caps;
uint ocr;
+ uint dsr;
+ uint dsr_imp;
uint scr[2];
uint csd[4];
uint cid[4];
@@ -304,6 +306,7 @@ int board_mmc_getcd(struct mmc *mmc);
int mmc_switch_part(int dev_num, unsigned int part_num);
int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
+int mmc_set_dsr(struct mmc *mmc, u16 val);
/* Function to change the size of boot partition and rpmb partitions */
int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
unsigned long rpmbsize);