Merge git://git.denx.de/u-boot-nand-flash

4 files changed, 73 insertions, 166 deletions

diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h
deleted file mode 100644
index 741fc0d..0000000
--- a/include/linux/mtd/docg4.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __DOCG4_H__
-#define __DOCG4_H__
-
-#include <common.h>
-#include <linux/mtd/nand.h>
-
-extern int docg4_nand_init(struct mtd_info *mtd,
-			   struct nand_chip *nand, int devnum);
-
-/* SPL-related definitions */
-#define DOCG4_IPL_LOAD_BLOCK_COUNT 2  /* number of blocks that IPL loads */
-#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */
-
-#define DOC_IOSPACE_DATA		0x0800
-
-/* register offsets */
-#define DOC_CHIPID			0x1000
-#define DOC_DEVICESELECT		0x100a
-#define DOC_ASICMODE			0x100c
-#define DOC_DATAEND			0x101e
-#define DOC_NOP				0x103e
-
-#define DOC_FLASHSEQUENCE		0x1032
-#define DOC_FLASHCOMMAND		0x1034
-#define DOC_FLASHADDRESS		0x1036
-#define DOC_FLASHCONTROL		0x1038
-#define DOC_ECCCONF0			0x1040
-#define DOC_ECCCONF1			0x1042
-#define DOC_HAMMINGPARITY		0x1046
-#define DOC_BCH_SYNDROM(idx)		(0x1048 + idx)
-
-#define DOC_ASICMODECONFIRM		0x1072
-#define DOC_CHIPID_INV			0x1074
-#define DOC_POWERMODE			0x107c
-
-#define DOCG4_MYSTERY_REG		0x1050
-
-/* apparently used only to write oob bytes 6 and 7 */
-#define DOCG4_OOB_6_7			0x1052
-
-/* DOC_FLASHSEQUENCE register commands */
-#define DOC_SEQ_RESET			0x00
-#define DOCG4_SEQ_PAGE_READ		0x03
-#define DOCG4_SEQ_FLUSH			0x29
-#define DOCG4_SEQ_PAGEWRITE		0x16
-#define DOCG4_SEQ_PAGEPROG		0x1e
-#define DOCG4_SEQ_BLOCKERASE		0x24
-
-/* DOC_FLASHCOMMAND register commands */
-#define DOCG4_CMD_PAGE_READ             0x00
-#define DOC_CMD_ERASECYCLE2		0xd0
-#define DOCG4_CMD_FLUSH                 0x70
-#define DOCG4_CMD_READ2                 0x30
-#define DOC_CMD_PROG_BLOCK_ADDR		0x60
-#define DOCG4_CMD_PAGEWRITE		0x80
-#define DOC_CMD_PROG_CYCLE2		0x10
-#define DOC_CMD_RESET			0xff
-
-/* DOC_POWERMODE register bits */
-#define DOC_POWERDOWN_READY		0x80
-
-/* DOC_FLASHCONTROL register bits */
-#define DOC_CTRL_CE			0x10
-#define DOC_CTRL_UNKNOWN		0x40
-#define DOC_CTRL_FLASHREADY		0x01
-
-/* DOC_ECCCONF0 register bits */
-#define DOC_ECCCONF0_READ_MODE		0x8000
-#define DOC_ECCCONF0_UNKNOWN		0x2000
-#define DOC_ECCCONF0_ECC_ENABLE	        0x1000
-#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
-
-/* DOC_ECCCONF1 register bits */
-#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
-#define DOC_ECCCONF1_ECC_ENABLE         0x07
-#define DOC_ECCCONF1_PAGE_IS_WRITTEN	0x20
-
-/* DOC_ASICMODE register bits */
-#define DOC_ASICMODE_RESET		0x00
-#define DOC_ASICMODE_NORMAL		0x01
-#define DOC_ASICMODE_POWERDOWN		0x02
-#define DOC_ASICMODE_MDWREN		0x04
-#define DOC_ASICMODE_BDETCT_RESET	0x08
-#define DOC_ASICMODE_RSTIN_RESET	0x10
-#define DOC_ASICMODE_RAM_WE		0x20
-
-/* good status values read after read/write/erase operations */
-#define DOCG4_PROGSTATUS_GOOD          0x51
-#define DOCG4_PROGSTATUS_GOOD_2        0xe0
-
-/*
- * On read operations (page and oob-only), the first byte read from I/O reg is a
- * status.  On error, it reads 0x73; otherwise, it reads either 0x71 (first read
- * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
- */
-#define DOCG4_READ_ERROR           0x02 /* bit 1 indicates read error */
-
-/* anatomy of the device */
-#define DOCG4_CHIP_SIZE        0x8000000
-#define DOCG4_PAGE_SIZE        0x200
-#define DOCG4_PAGES_PER_BLOCK  0x200
-#define DOCG4_BLOCK_SIZE       (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
-#define DOCG4_NUMBLOCKS        (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
-#define DOCG4_OOB_SIZE         0x10
-#define DOCG4_CHIP_SHIFT       27    /* log_2(DOCG4_CHIP_SIZE) */
-#define DOCG4_PAGE_SHIFT       9     /* log_2(DOCG4_PAGE_SIZE) */
-#define DOCG4_ERASE_SHIFT      18    /* log_2(DOCG4_BLOCK_SIZE) */
-
-/* all but the last byte is included in ecc calculation */
-#define DOCG4_BCH_SIZE         (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
-
-#define DOCG4_USERDATA_LEN     520 /* 512 byte page plus 8 oob avail to user */
-
-/* expected values from the ID registers */
-#define DOCG4_IDREG1_VALUE     0x0400
-#define DOCG4_IDREG2_VALUE     0xfbff
-
-/* primitive polynomial used to build the Galois field used by hw ecc gen */
-#define DOCG4_PRIMITIVE_POLY   0x4443
-
-#define DOCG4_M                14  /* Galois field is of order 2^14 */
-#define DOCG4_T                4   /* BCH alg corrects up to 4 bit errors */
-
-#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
-
-#endif	/* __DOCG4_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 9da77ec..cf20674 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -278,6 +278,11 @@ struct mtd_info {
 	int usecount;
 };
 
+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
+{
+	return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
+}
+
 int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
 #ifndef __UBOOT__
 int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 23072fd..b5a02c3 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -25,6 +25,8 @@
 
 struct mtd_info;
 struct nand_flash_dev;
+struct device_node;
+
 /* Scan and identify a NAND device */
 extern int nand_scan(struct mtd_info *mtd, int max_chips);
 /*
@@ -144,6 +146,14 @@ typedef enum {
 /* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
+/*
+ * Enable generic NAND 'page erased' check. This check is only done when
+ * ecc.correct() returns -EBADMSG.
+ * Set this flag if your implementation does not fix bitflips in erased
+ * pages and you want to rely on the default implementation.
+ */
+#define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
+
 /* Bit mask for flags passed to do_nand_read_ecc */
 #define NAND_GET_DEVICE		0x80
 
@@ -179,6 +189,12 @@ typedef enum {
 /* Device supports subpage reads */
 #define NAND_SUBPAGE_READ	0x00001000
 
+/*
+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
+ * patterns.
+ */
+#define NAND_NEED_SCRAMBLING	0x00002000
+
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
 
@@ -203,6 +219,11 @@ typedef enum {
  * before calling nand_scan_tail.
  */
 #define NAND_BUSWIDTH_AUTO      0x00080000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER	0x00100000
 
 /* Options set by nand scan */
 /* bbt has already been read */
@@ -292,15 +313,15 @@ struct nand_onfi_params {
 	__le16 t_r;
 	__le16 t_ccs;
 	__le16 src_sync_timing_mode;
-	__le16 src_ssync_features;
+	u8 src_ssync_features;
 	__le16 clk_pin_capacitance_typ;
 	__le16 io_pin_capacitance_typ;
 	__le16 input_pin_capacitance_typ;
 	u8 input_pin_capacitance_max;
 	u8 driver_strength_support;
 	__le16 t_int_r;
-	__le16 t_ald;
-	u8 reserved4[7];
+	__le16 t_adl;
+	u8 reserved4[8];
 
 	/* vendor */
 	__le16 vendor_revision;
@@ -423,7 +444,7 @@ struct nand_jedec_params {
 	__le16 input_pin_capacitance_typ;
 	__le16 clk_pin_capacitance_typ;
 	u8 driver_strength_support;
-	__le16 t_ald;
+	__le16 t_adl;
 	u8 reserved4[36];
 
 	/* ECC and endurance block */
@@ -466,12 +487,19 @@ struct nand_hw_control {
  * @total:	total number of ECC bytes per page
  * @prepad:	padding information for syndrome based ECC generators
  * @postpad:	padding information for syndrome based ECC generators
+ * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
  * @layout:	ECC layout control struct pointer
  * @priv:	pointer to private ECC control data
  * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
  * @calculate:	function for ECC calculation or readback from ECC hardware
- * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw).
+ *		Should return a positive number representing the number of
+ *		corrected bitflips, -EBADMSG if the number of bitflips exceed
+ *		ECC strength, or any other error code if the error is not
+ *		directly related to correction.
+ *		If -EBADMSG is returned the input buffers should be left
+ *		untouched.
  * @read_page_raw:	function to read a raw page without ECC. This function
  *			should hide the specific layout used by the ECC
  *			controller and always return contiguous in-band and
@@ -509,6 +537,7 @@ struct nand_ecc_ctrl {
 	int strength;
 	int prepad;
 	int postpad;
+	unsigned int options;
 	struct nand_ecclayout	*layout;
 	void *priv;
 	void (*hwctl)(struct mtd_info *mtd, int mode);
@@ -519,16 +548,16 @@ struct nand_ecc_ctrl {
 	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint8_t *buf, int oob_required, int page);
 	int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required);
+			const uint8_t *buf, int oob_required, int page);
 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offs, uint32_t len, uint8_t *buf, int page);
 	int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offset, uint32_t data_len,
-			const uint8_t *data_buf, int oob_required);
+			const uint8_t *data_buf, int oob_required, int page);
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required);
+			const uint8_t *buf, int oob_required, int page);
 	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
 			int page);
 	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -556,6 +585,7 @@ struct nand_buffers {
 
 /**
  * struct nand_chip - NAND Private Flash Chip Data
+ * @mtd:		MTD device registered to the MTD framework
  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
  *			flash device
  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
@@ -571,10 +601,6 @@ struct nand_buffers {
  * @block_markbad:	[REPLACEABLE] mark a block bad
  * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
  *			ALE/CLE/nCE. Also used to write command and address
- * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
- *			mtd->oobsize, mtd->writesize and so on.
- *			@id_data contains the 8 bytes values of NAND_CMD_READID.
- *			Return with the bus width.
  * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
  *			device ready/busy line. If set to NULL no access to
  *			ready/busy is available and the ready/busy information
@@ -659,6 +685,7 @@ struct nand_buffers {
  */
 
 struct nand_chip {
+	struct mtd_info mtd;
 	void __iomem *IO_ADDR_R;
 	void __iomem *IO_ADDR_W;
 
@@ -668,11 +695,9 @@ struct nand_chip {
 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
 	void (*select_chip)(struct mtd_info *mtd, int chip);
-	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+	int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
-			u8 *id_data);
 	int (*dev_ready)(struct mtd_info *mtd);
 	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
 			int page_addr);
@@ -739,6 +764,26 @@ struct nand_chip {
 	void *priv;
 };
 
+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct nand_chip, mtd);
+}
+
+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
+{
+	return &chip->mtd;
+}
+
+static inline void *nand_get_controller_data(struct nand_chip *chip)
+{
+	return chip->priv;
+}
+
+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
+{
+	chip->priv = priv;
+}
+
 /*
  * NAND Flash Manufacturer ID Codes
  */
@@ -852,7 +897,6 @@ struct nand_manufacturers {
 extern struct nand_flash_dev nand_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
-extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_default_bbt(struct mtd_info *mtd);
 extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
 extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
@@ -877,7 +921,6 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @chip_delay:		R/B delay value in us
  * @options:		Option flags, e.g. 16bit buswidth
  * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout:		ECC layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
  */
 struct platform_nand_chip {
@@ -885,7 +928,6 @@ struct platform_nand_chip {
 	int chip_offset;
 	int nr_partitions;
 	struct mtd_partition *partitions;
-	struct nand_ecclayout *ecclayout;
 	int chip_delay;
 	unsigned int options;
 	unsigned int bbt_options;
@@ -934,15 +976,6 @@ struct platform_nand_data {
 	struct platform_nand_ctrl ctrl;
 };
 
-/* Some helpers to access the data structures */
-static inline
-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	return chip->priv;
-}
-
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
 /* return the supported features. */
 static inline int onfi_feature(struct nand_chip *chip)
@@ -1060,4 +1093,9 @@ struct nand_sdr_timings {
 
 /* get timing characteristics from ONFI timing mode. */
 const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+				void *ecc, int ecclen,
+				void *extraoob, int extraooblen,
+				int threshold);
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index d8754dd..8ea6b04 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
 /*
  * Initialize BCH encoder/decoder
  */
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
 /*
  * Release BCH encoder/decoder resources
  */
@@ -55,12 +53,10 @@ static inline int
 nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
-	return -1;
+	return -ENOTSUPP;
 }
 
-static inline struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 {
 	return NULL;
 }