summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
authorTom Rini <trini@konsulko.com>2016-06-04 08:49:47 -0400
committerTom Rini <trini@konsulko.com>2016-06-04 08:49:47 -0400
commit715b3a9b2486e8d7a32365d817c77209b35ee796 (patch)
tree5daa126a15d2e0d60156664d19adbf451324d098 /include/linux
parentc41c649c2fdec7bf6ef84173597cc3feabdb7828 (diff)
parent667067faa18334f1e28c01b47530b5cce1b6182f (diff)
downloadu-boot-imx-715b3a9b2486e8d7a32365d817c77209b35ee796.zip
u-boot-imx-715b3a9b2486e8d7a32365d817c77209b35ee796.tar.gz
u-boot-imx-715b3a9b2486e8d7a32365d817c77209b35ee796.tar.bz2
Merge git://git.denx.de/u-boot-nand-flash
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/mtd/docg4.h132
-rw-r--r--include/linux/mtd/mtd.h5
-rw-r--r--include/linux/mtd/nand.h92
-rw-r--r--include/linux/mtd/nand_bch.h10
4 files changed, 73 insertions, 166 deletions
diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h
deleted file mode 100644
index 741fc0d..0000000
--- a/include/linux/mtd/docg4.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __DOCG4_H__
-#define __DOCG4_H__
-
-#include <common.h>
-#include <linux/mtd/nand.h>
-
-extern int docg4_nand_init(struct mtd_info *mtd,
- struct nand_chip *nand, int devnum);
-
-/* SPL-related definitions */
-#define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */
-#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */
-
-#define DOC_IOSPACE_DATA 0x0800
-
-/* register offsets */
-#define DOC_CHIPID 0x1000
-#define DOC_DEVICESELECT 0x100a
-#define DOC_ASICMODE 0x100c
-#define DOC_DATAEND 0x101e
-#define DOC_NOP 0x103e
-
-#define DOC_FLASHSEQUENCE 0x1032
-#define DOC_FLASHCOMMAND 0x1034
-#define DOC_FLASHADDRESS 0x1036
-#define DOC_FLASHCONTROL 0x1038
-#define DOC_ECCCONF0 0x1040
-#define DOC_ECCCONF1 0x1042
-#define DOC_HAMMINGPARITY 0x1046
-#define DOC_BCH_SYNDROM(idx) (0x1048 + idx)
-
-#define DOC_ASICMODECONFIRM 0x1072
-#define DOC_CHIPID_INV 0x1074
-#define DOC_POWERMODE 0x107c
-
-#define DOCG4_MYSTERY_REG 0x1050
-
-/* apparently used only to write oob bytes 6 and 7 */
-#define DOCG4_OOB_6_7 0x1052
-
-/* DOC_FLASHSEQUENCE register commands */
-#define DOC_SEQ_RESET 0x00
-#define DOCG4_SEQ_PAGE_READ 0x03
-#define DOCG4_SEQ_FLUSH 0x29
-#define DOCG4_SEQ_PAGEWRITE 0x16
-#define DOCG4_SEQ_PAGEPROG 0x1e
-#define DOCG4_SEQ_BLOCKERASE 0x24
-
-/* DOC_FLASHCOMMAND register commands */
-#define DOCG4_CMD_PAGE_READ 0x00
-#define DOC_CMD_ERASECYCLE2 0xd0
-#define DOCG4_CMD_FLUSH 0x70
-#define DOCG4_CMD_READ2 0x30
-#define DOC_CMD_PROG_BLOCK_ADDR 0x60
-#define DOCG4_CMD_PAGEWRITE 0x80
-#define DOC_CMD_PROG_CYCLE2 0x10
-#define DOC_CMD_RESET 0xff
-
-/* DOC_POWERMODE register bits */
-#define DOC_POWERDOWN_READY 0x80
-
-/* DOC_FLASHCONTROL register bits */
-#define DOC_CTRL_CE 0x10
-#define DOC_CTRL_UNKNOWN 0x40
-#define DOC_CTRL_FLASHREADY 0x01
-
-/* DOC_ECCCONF0 register bits */
-#define DOC_ECCCONF0_READ_MODE 0x8000
-#define DOC_ECCCONF0_UNKNOWN 0x2000
-#define DOC_ECCCONF0_ECC_ENABLE 0x1000
-#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
-
-/* DOC_ECCCONF1 register bits */
-#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
-#define DOC_ECCCONF1_ECC_ENABLE 0x07
-#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
-
-/* DOC_ASICMODE register bits */
-#define DOC_ASICMODE_RESET 0x00
-#define DOC_ASICMODE_NORMAL 0x01
-#define DOC_ASICMODE_POWERDOWN 0x02
-#define DOC_ASICMODE_MDWREN 0x04
-#define DOC_ASICMODE_BDETCT_RESET 0x08
-#define DOC_ASICMODE_RSTIN_RESET 0x10
-#define DOC_ASICMODE_RAM_WE 0x20
-
-/* good status values read after read/write/erase operations */
-#define DOCG4_PROGSTATUS_GOOD 0x51
-#define DOCG4_PROGSTATUS_GOOD_2 0xe0
-
-/*
- * On read operations (page and oob-only), the first byte read from I/O reg is a
- * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read
- * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
- */
-#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */
-
-/* anatomy of the device */
-#define DOCG4_CHIP_SIZE 0x8000000
-#define DOCG4_PAGE_SIZE 0x200
-#define DOCG4_PAGES_PER_BLOCK 0x200
-#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
-#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
-#define DOCG4_OOB_SIZE 0x10
-#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */
-#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */
-#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */
-
-/* all but the last byte is included in ecc calculation */
-#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
-
-#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */
-
-/* expected values from the ID registers */
-#define DOCG4_IDREG1_VALUE 0x0400
-#define DOCG4_IDREG2_VALUE 0xfbff
-
-/* primitive polynomial used to build the Galois field used by hw ecc gen */
-#define DOCG4_PRIMITIVE_POLY 0x4443
-
-#define DOCG4_M 14 /* Galois field is of order 2^14 */
-#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
-
-#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
-
-#endif /* __DOCG4_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 9da77ec..cf20674 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -278,6 +278,11 @@ struct mtd_info {
int usecount;
};
+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
+{
+ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
+}
+
int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
#ifndef __UBOOT__
int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 23072fd..b5a02c3 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -25,6 +25,8 @@
struct mtd_info;
struct nand_flash_dev;
+struct device_node;
+
/* Scan and identify a NAND device */
extern int nand_scan(struct mtd_info *mtd, int max_chips);
/*
@@ -144,6 +146,14 @@ typedef enum {
/* Enable Hardware ECC before syndrome is read back from flash */
#define NAND_ECC_READSYN 2
+/*
+ * Enable generic NAND 'page erased' check. This check is only done when
+ * ecc.correct() returns -EBADMSG.
+ * Set this flag if your implementation does not fix bitflips in erased
+ * pages and you want to rely on the default implementation.
+ */
+#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
+
/* Bit mask for flags passed to do_nand_read_ecc */
#define NAND_GET_DEVICE 0x80
@@ -179,6 +189,12 @@ typedef enum {
/* Device supports subpage reads */
#define NAND_SUBPAGE_READ 0x00001000
+/*
+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
+ * patterns.
+ */
+#define NAND_NEED_SCRAMBLING 0x00002000
+
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
@@ -203,6 +219,11 @@ typedef enum {
* before calling nand_scan_tail.
*/
#define NAND_BUSWIDTH_AUTO 0x00080000
+/*
+ * This option could be defined by controller drivers to protect against
+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
+ */
+#define NAND_USE_BOUNCE_BUFFER 0x00100000
/* Options set by nand scan */
/* bbt has already been read */
@@ -292,15 +313,15 @@ struct nand_onfi_params {
__le16 t_r;
__le16 t_ccs;
__le16 src_sync_timing_mode;
- __le16 src_ssync_features;
+ u8 src_ssync_features;
__le16 clk_pin_capacitance_typ;
__le16 io_pin_capacitance_typ;
__le16 input_pin_capacitance_typ;
u8 input_pin_capacitance_max;
u8 driver_strength_support;
__le16 t_int_r;
- __le16 t_ald;
- u8 reserved4[7];
+ __le16 t_adl;
+ u8 reserved4[8];
/* vendor */
__le16 vendor_revision;
@@ -423,7 +444,7 @@ struct nand_jedec_params {
__le16 input_pin_capacitance_typ;
__le16 clk_pin_capacitance_typ;
u8 driver_strength_support;
- __le16 t_ald;
+ __le16 t_adl;
u8 reserved4[36];
/* ECC and endurance block */
@@ -466,12 +487,19 @@ struct nand_hw_control {
* @total: total number of ECC bytes per page
* @prepad: padding information for syndrome based ECC generators
* @postpad: padding information for syndrome based ECC generators
+ * @options: ECC specific options (see NAND_ECC_XXX flags defined above)
* @layout: ECC layout control struct pointer
* @priv: pointer to private ECC control data
* @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
* @calculate: function for ECC calculation or readback from ECC hardware
- * @correct: function for ECC correction, matching to ECC generator (sw/hw)
+ * @correct: function for ECC correction, matching to ECC generator (sw/hw).
+ * Should return a positive number representing the number of
+ * corrected bitflips, -EBADMSG if the number of bitflips exceed
+ * ECC strength, or any other error code if the error is not
+ * directly related to correction.
+ * If -EBADMSG is returned the input buffers should be left
+ * untouched.
* @read_page_raw: function to read a raw page without ECC. This function
* should hide the specific layout used by the ECC
* controller and always return contiguous in-band and
@@ -509,6 +537,7 @@ struct nand_ecc_ctrl {
int strength;
int prepad;
int postpad;
+ unsigned int options;
struct nand_ecclayout *layout;
void *priv;
void (*hwctl)(struct mtd_info *mtd, int mode);
@@ -519,16 +548,16 @@ struct nand_ecc_ctrl {
int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required);
+ const uint8_t *buf, int oob_required, int page);
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offs, uint32_t len, uint8_t *buf, int page);
int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, uint32_t data_len,
- const uint8_t *data_buf, int oob_required);
+ const uint8_t *data_buf, int oob_required, int page);
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int oob_required);
+ const uint8_t *buf, int oob_required, int page);
int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
int page);
int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
@@ -556,6 +585,7 @@ struct nand_buffers {
/**
* struct nand_chip - NAND Private Flash Chip Data
+ * @mtd: MTD device registered to the MTD framework
* @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
* flash device
* @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the
@@ -571,10 +601,6 @@ struct nand_buffers {
* @block_markbad: [REPLACEABLE] mark a block bad
* @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling
* ALE/CLE/nCE. Also used to write command and address
- * @init_size: [BOARDSPECIFIC] hardwarespecific function for setting
- * mtd->oobsize, mtd->writesize and so on.
- * @id_data contains the 8 bytes values of NAND_CMD_READID.
- * Return with the bus width.
* @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accessing
* device ready/busy line. If set to NULL no access to
* ready/busy is available and the ready/busy information
@@ -659,6 +685,7 @@ struct nand_buffers {
*/
struct nand_chip {
+ struct mtd_info mtd;
void __iomem *IO_ADDR_R;
void __iomem *IO_ADDR_W;
@@ -668,11 +695,9 @@ struct nand_chip {
void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
void (*select_chip)(struct mtd_info *mtd, int chip);
- int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
- u8 *id_data);
int (*dev_ready)(struct mtd_info *mtd);
void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
int page_addr);
@@ -739,6 +764,26 @@ struct nand_chip {
void *priv;
};
+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct nand_chip, mtd);
+}
+
+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
+{
+ return &chip->mtd;
+}
+
+static inline void *nand_get_controller_data(struct nand_chip *chip)
+{
+ return chip->priv;
+}
+
+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
+{
+ chip->priv = priv;
+}
+
/*
* NAND Flash Manufacturer ID Codes
*/
@@ -852,7 +897,6 @@ struct nand_manufacturers {
extern struct nand_flash_dev nand_flash_ids[];
extern struct nand_manufacturers nand_manuf_ids[];
-extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int nand_default_bbt(struct mtd_info *mtd);
extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
@@ -877,7 +921,6 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
* @chip_delay: R/B delay value in us
* @options: Option flags, e.g. 16bit buswidth
* @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout: ECC layout info structure
* @part_probe_types: NULL-terminated array of probe types
*/
struct platform_nand_chip {
@@ -885,7 +928,6 @@ struct platform_nand_chip {
int chip_offset;
int nr_partitions;
struct mtd_partition *partitions;
- struct nand_ecclayout *ecclayout;
int chip_delay;
unsigned int options;
unsigned int bbt_options;
@@ -934,15 +976,6 @@ struct platform_nand_data {
struct platform_nand_ctrl ctrl;
};
-/* Some helpers to access the data structures */
-static inline
-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- return chip->priv;
-}
-
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
/* return the supported features. */
static inline int onfi_feature(struct nand_chip *chip)
@@ -1060,4 +1093,9 @@ struct nand_sdr_timings {
/* get timing characteristics from ONFI timing mode. */
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
+
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+ void *ecc, int ecclen,
+ void *extraoob, int extraooblen,
+ int threshold);
#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index d8754dd..8ea6b04 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
/*
* Initialize BCH encoder/decoder
*/
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
- unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
/*
* Release BCH encoder/decoder resources
*/
@@ -55,12 +53,10 @@ static inline int
nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
unsigned char *read_ecc, unsigned char *calc_ecc)
{
- return -1;
+ return -ENOTSUPP;
}
-static inline struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
- unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
{
return NULL;
}