summaryrefslogtreecommitdiff
path: root/include/linux/usb
diff options
context:
space:
mode:
authorIlya Yanok <ilya.yanok@cogentembedded.com>2012-11-06 13:48:21 +0000
committerMarek Vasut <marex@denx.de>2012-11-20 00:16:06 +0100
commiteb81955bf0e34aeb33930cd4b2f63aa05c791fef (patch)
tree1f7d8e6edffbf3bc9c1f3f0900cd12429646ceac /include/linux/usb
parentc60795f41d37600b6ebd79ec99252ec2f5efecd4 (diff)
downloadu-boot-imx-eb81955bf0e34aeb33930cd4b2f63aa05c791fef.zip
u-boot-imx-eb81955bf0e34aeb33930cd4b2f63aa05c791fef.tar.gz
u-boot-imx-eb81955bf0e34aeb33930cd4b2f63aa05c791fef.tar.bz2
musb-new: port of Linux musb driver
Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
Diffstat (limited to 'include/linux/usb')
-rw-r--r--include/linux/usb/musb.h162
1 files changed, 162 insertions, 0 deletions
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 0000000..9f65ef9
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,162 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc". It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+#ifndef __deprecated
+#define __deprecated
+#endif
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed. (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+ MUSB_UNDEFINED = 0,
+ MUSB_HOST, /* A or Mini-A connector */
+ MUSB_PERIPHERAL, /* B or Mini-B connector */
+ MUSB_OTG /* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+ FIFO_RXTX,
+ FIFO_TX,
+ FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+ BUF_SINGLE,
+ BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+ u8 hw_ep_num;
+ enum musb_fifo_style style;
+ enum musb_buf_mode mode;
+ u16 maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt) \
+{ \
+ .hw_ep_num = ep, \
+ .style = st, \
+ .mode = m, \
+ .maxpacket = pkt, \
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+ const char name[16];
+ u8 bits;
+};
+
+struct musb_hdrc_config {
+ struct musb_fifo_cfg *fifo_cfg; /* board fifo configuration */
+ unsigned fifo_cfg_size; /* size of the fifo configuration */
+
+ /* MUSB configuration-specific details */
+ unsigned multipoint:1; /* multipoint device */
+ unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+ unsigned soft_con:1 __deprecated; /* soft connect required */
+ unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+ unsigned big_endian:1; /* true if CPU uses big-endian */
+ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
+ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
+ unsigned high_iso_tx:1; /* Tx ep required for HB iso */
+ unsigned high_iso_rx:1; /* Rx ep required for HD iso */
+ unsigned dma:1 __deprecated; /* supports DMA */
+ unsigned vendor_req:1 __deprecated; /* vendor registers required */
+
+ u8 num_eps; /* number of endpoints _with_ ep0 */
+ u8 dma_channels __deprecated; /* number of dma channels */
+ u8 dyn_fifo_size; /* dynamic size in bytes */
+ u8 vendor_ctrl __deprecated; /* vendor control reg width */
+ u8 vendor_stat __deprecated; /* vendor status reg witdh */
+ u8 dma_req_chan __deprecated; /* bitmask for required dma channels */
+ u8 ram_bits; /* ram address size */
+
+ struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+ /* A GPIO controlling VRSEL in Blackfin */
+ unsigned int gpio_vrsel;
+ unsigned int gpio_vrsel_active;
+ /* musb CLKIN in Blackfin in MHZ */
+ unsigned char clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+ /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+ u8 mode;
+
+ /* for clk_get() */
+ const char *clock;
+
+ /* (HOST or OTG) switch VBUS on/off */
+ int (*set_vbus)(struct device *dev, int is_on);
+
+ /* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+ u8 power;
+
+ /* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+ u8 min_power;
+
+ /* (HOST or OTG) msec/2 after VBUS on till power good */
+ u8 potpgt;
+
+ /* (HOST or OTG) program PHY for external Vbus */
+ unsigned extvbus:1;
+
+ /* Power the device on or off */
+ int (*set_power)(int state);
+
+ /* MUSB configuration-specific details */
+ struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
+
+ /* Platform specific struct musb_ops pointer */
+ const void *platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */
+#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */
+#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+ struct musb_hdrc_platform_data *data,
+ unsigned ps_refclk, unsigned waitpin,
+ unsigned async_cs, unsigned sync_cs,
+ unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif /* OMAP2 */
+
+/*
+ * U-Boot specfic stuff
+ */
+int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
+ void *ctl_regs);
+
+#endif /* __LINUX_USB_MUSB_H */