Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 162 insertions, 0 deletions

diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 0000000..9f65ef9
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,162 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc".  It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+#ifndef __deprecated
+#define __deprecated
+#endif
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed.  (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+	MUSB_UNDEFINED = 0,
+	MUSB_HOST,		/* A or Mini-A connector */
+	MUSB_PERIPHERAL,	/* B or Mini-B connector */
+	MUSB_OTG		/* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+	FIFO_RXTX,
+	FIFO_TX,
+	FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+	BUF_SINGLE,
+	BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+	u8			hw_ep_num;
+	enum musb_fifo_style	style;
+	enum musb_buf_mode	mode;
+	u16			maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt)		\
+{						\
+	.hw_ep_num	= ep,			\
+	.style		= st,			\
+	.mode		= m,			\
+	.maxpacket	= pkt,			\
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
+	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+	const char	name[16];
+	u8		bits;
+};
+
+struct musb_hdrc_config {
+	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
+	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
+
+	/* MUSB configuration-specific details */
+	unsigned	multipoint:1;	/* multipoint device */
+	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+	unsigned	soft_con:1 __deprecated; /* soft connect required */
+	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+	unsigned	big_endian:1;	/* true if CPU uses big-endian */
+	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
+	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
+	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
+	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
+	unsigned	dma:1 __deprecated; /* supports DMA */
+	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
+
+	u8		num_eps;	/* number of endpoints _with_ ep0 */
+	u8		dma_channels __deprecated; /* number of dma channels */
+	u8		dyn_fifo_size;	/* dynamic size in bytes */
+	u8		vendor_ctrl __deprecated; /* vendor control reg width */
+	u8		vendor_stat __deprecated; /* vendor status reg witdh */
+	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
+	u8		ram_bits;	/* ram address size */
+
+	struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+	/* A GPIO controlling VRSEL in Blackfin */
+	unsigned int	gpio_vrsel;
+	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+	u8		mode;
+
+	/* for clk_get() */
+	const char	*clock;
+
+	/* (HOST or OTG) switch VBUS on/off */
+	int		(*set_vbus)(struct device *dev, int is_on);
+
+	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+	u8		power;
+
+	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+	u8		min_power;
+
+	/* (HOST or OTG) msec/2 after VBUS on till power good */
+	u8		potpgt;
+
+	/* (HOST or OTG) program PHY for external Vbus */
+	unsigned	extvbus:1;
+
+	/* Power the device on or off */
+	int		(*set_power)(int state);
+
+	/* MUSB configuration-specific details */
+	struct musb_hdrc_config	*config;
+
+	/* Architecture specific board data	*/
+	void		*board_data;
+
+	/* Platform specific struct musb_ops pointer */
+	const void	*platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
+#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
+#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef	CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned ps_refclk, unsigned waitpin,
+		unsigned async_cs, unsigned sync_cs,
+		unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif	/* OMAP2 */
+
+/*
+ * U-Boot specfic stuff
+ */
+int musb_register(struct musb_hdrc_platform_data *plat, void *bdata,
+			void *ctl_regs);
+
+#endif /* __LINUX_USB_MUSB_H */