Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next

1 files changed, 100 insertions, 50 deletions

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 05ba375..8e0dc00 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,5 +1,5 @@
 /*
- * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
+ * $Id: mtd.h,v 1.61 2005/11/07 11:14:54 gleixner Exp $
  *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
  *
@@ -8,10 +8,13 @@
 
 #ifndef __MTD_MTD_H__
 #define __MTD_MTD_H__
+
 #include <linux/types.h>
 #include <linux/mtd/mtd-abi.h>
 
-#define MAX_MTD_DEVICES 16
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 32
 
 #define MTD_ERASE_PENDING	0x01
 #define MTD_ERASING		0x02
@@ -41,32 +44,83 @@ struct mtd_erase_region_info {
 	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */
 	u_int32_t erasesize;		/* For this region */
 	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+	unsigned long *lockmap;		/* If keeping bitmap of locks */
+};
+
+/*
+ * oob operation modes
+ *
+ * MTD_OOB_PLACE:	oob data are placed at the given offset
+ * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
+ *			which are defined by the ecclayout
+ * MTD_OOB_RAW:		mode to read raw data+oob in one chunk. The oob data
+ *			is inserted into the data. Thats a raw image of the
+ *			flash contents.
+ */
+typedef enum {
+	MTD_OOB_PLACE,
+	MTD_OOB_AUTO,
+	MTD_OOB_RAW,
+} mtd_oob_mode_t;
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode:	operation mode
+ *
+ * @len:	number of data bytes to write/read
+ *
+ * @retlen:	number of data bytes written/read
+ *
+ * @ooblen:	number of oob bytes to write/read
+ * @oobretlen:	number of oob bytes written/read
+ * @ooboffs:	offset of oob data in the oob area (only relevant when
+ *		mode = MTD_OOB_PLACE)
+ * @datbuf:	data buffer - if NULL only oob data are read/written
+ * @oobbuf:	oob data buffer
+ *
+ * Note, it is allowed to read more then one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
+ */
+struct mtd_oob_ops {
+	mtd_oob_mode_t	mode;
+	size_t		len;
+	size_t		retlen;
+	size_t		ooblen;
+	size_t		oobretlen;
+	uint32_t	ooboffs;
+	uint8_t		*datbuf;
+	uint8_t		*oobbuf;
 };
 
 struct mtd_info {
 	u_char type;
 	u_int32_t flags;
-	u_int32_t size;	 /* Total size of the MTD */
+	u_int32_t size;	 // Total size of the MTD
 
-	/* "Major" erase size for the device. Naïve users may take this
+	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */
 	u_int32_t erasesize;
+	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
+	 * though individual bits can be cleared), in case of NAND flash it is
+	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
+	 * it is of ECC block size, etc. It is illegal to have writesize = 0.
+	 * Any driver registering a struct mtd_info must ensure a writesize of
+	 * 1 or larger.
+	 */
+	u_int32_t writesize;
 
-	u_int32_t oobblock;  /* Size of OOB blocks (e.g. 512) */
-	u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
-	u_int32_t oobavail;  /* Number of bytes in OOB area available for fs  */
-	u_int32_t ecctype;
-	u_int32_t eccsize;
-
+	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t oobavail;  // Available OOB bytes per block
 
-	/* Kernel-only stuff starts here. */
+	// Kernel-only stuff starts here.
 	char *name;
 	int index;
 
-	/* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */
-	struct nand_oobinfo oobinfo;
+	/* ecc layout structure pointer - read only ! */
+	struct nand_ecclayout *ecclayout;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
 	 * it means that the whole device has erasesize as given above.
@@ -74,9 +128,6 @@ struct mtd_info {
 	int numeraseregions;
 	struct mtd_erase_region_info *eraseregions;
 
-	/* This really shouldn't be here. It can go away in 2.5 */
-	u_int32_t bank_size;
-
 	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
 
 	/* This stuff for eXecute-In-Place */
@@ -89,39 +140,35 @@ struct mtd_info {
 	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
-	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-
-	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+	int (*read_oob) (struct mtd_info *mtd, loff_t from,
+			 struct mtd_oob_ops *ops);
+	int (*write_oob) (struct mtd_info *mtd, loff_t to,
+			 struct mtd_oob_ops *ops);
 
 	/*
 	 * Methods to access the protection register area, present in some
 	 * flash devices. The user data is one time programmable but the
 	 * factory data is read only.
 	 */
-	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
+	int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
 	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-
-	/* This function is not yet implemented */
+	int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
+	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
+
+/* XXX U-BOOT XXX */
 #if 0
-	/* kvec-based read/write methods. We need these especially for NAND flash,
-	   with its limited number of write cycles per erase.
+	/* kvec-based read/write methods.
 	   NB: The 'count' parameter is the number of _vectors_, each of
 	   which contains an (ofs, len) tuple.
 	*/
-	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
-	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
-		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
-	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
-		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 #endif
+
 	/* Sync */
 	void (*sync) (struct mtd_info *mtd);
-#if 0
+
 	/* Chip-supported device locking */
 	int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
 	int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
@@ -129,15 +176,32 @@ struct mtd_info {
 	/* Power Management functions */
 	int (*suspend) (struct mtd_info *mtd);
 	void (*resume) (struct mtd_info *mtd);
-#endif
+
 	/* Bad block management functions */
 	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
 	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
 
+/* XXX U-BOOT XXX */
+#if 0
+	struct notifier_block reboot_notifier;  /* default mode before reboot */
+#endif
+
+	/* ECC status information */
+	struct mtd_ecc_stats ecc_stats;
+	/* Subpage shift (NAND) */
+	int subpage_sft;
+
 	void *priv;
 
 	struct module *owner;
 	int usecount;
+
+	/* If the driver is something smart, like UBI, it may need to maintain
+	 * its own reference counting. The below functions are only for driver.
+	 * The driver may register its callbacks. These callbacks are not
+	 * supposed to be called by MTD users */
+	int (*get_device) (struct mtd_info *mtd);
+	void (*put_device) (struct mtd_info *mtd);
 };
 
 
@@ -147,9 +211,11 @@ extern int add_mtd_device(struct mtd_info *mtd);
 extern int del_mtd_device (struct mtd_info *mtd);
 
 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
 
 extern void put_mtd_device(struct mtd_info *mtd);
 
+/* XXX U-BOOT XXX */
 #if 0
 struct mtd_notifier {
 	void (*add)(struct mtd_info *mtd);
@@ -157,7 +223,6 @@ struct mtd_notifier {
 	struct list_head list;
 };
 
-
 extern void register_mtd_user (struct mtd_notifier *new);
 extern int unregister_mtd_user (struct mtd_notifier *old);
 
@@ -168,20 +233,6 @@ int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
 		      unsigned long count, loff_t from, size_t *retlen);
 #endif
 
-#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
-#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
-#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
-#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
-#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
-#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
-#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
-#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
-#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
-#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
-#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0)
-
-
 #ifdef CONFIG_MTD_PARTITIONS
 void mtd_erase_callback(struct erase_info *instr);
 #else
@@ -208,7 +259,6 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
 #define MTDDEBUG(n, args...) do { } while(0)
-
 #endif /* CONFIG_MTD_DEBUG */
 
 #endif /* __MTD_MTD_H__ */