[ARM] TI DaVinci support, hopefully final

Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>

1 files changed, 88 insertions, 0 deletions

diff --git a/include/dp83848.h b/include/dp83848.h
new file mode 100644
index 0000000..274bc4c
--- /dev/null
+++ b/include/dp83848.h
@@ -0,0 +1,88 @@
+/*
+ * DP83848 ethernet Physical layer
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
+
+#define DP83848_CTL_REG		0x0	/* Basic Mode Control Reg */
+#define DP83848_STAT_REG		0x1	/* Basic Mode Status Reg */
+#define DP83848_PHYID1_REG		0x2	/* PHY Idendifier Reg 1 */
+#define DP83848_PHYID2_REG		0x3	/* PHY Idendifier Reg 2 */
+#define DP83848_ANA_REG			0x4	/* Auto_Neg Advt Reg  */
+#define DP83848_ANLPA_REG		0x5	/* Auto_neg Link Partner Ability Reg */
+#define DP83848_ANE_REG			0x6	/* Auto-neg Expansion Reg  */
+#define DP83848_PHY_STAT_REG		0x10	/* PHY Status Register  */
+#define DP83848_PHY_INTR_CTRL_REG	0x11	/* PHY Interrupt Control Register */
+#define DP83848_PHY_CTRL_REG		0x19	/* PHY Status Register  */
+
+/*--Bit definitions: DP83848_CTL_REG */
+#define DP83848_RESET		(1 << 15)  /* 1= S/W Reset */
+#define DP83848_LOOPBACK	(1 << 14)  /* 1=loopback Enabled */
+#define DP83848_SPEED_SELECT	(1 << 13)
+#define DP83848_AUTONEG		(1 << 12)
+#define DP83848_POWER_DOWN	(1 << 11)
+#define DP83848_ISOLATE		(1 << 10)
+#define DP83848_RESTART_AUTONEG	(1 << 9)
+#define DP83848_DUPLEX_MODE	(1 << 8)
+#define DP83848_COLLISION_TEST	(1 << 7)
+
+/*--Bit definitions: DP83848_STAT_REG */
+#define DP83848_100BASE_T4	(1 << 15)
+#define DP83848_100BASE_TX_FD	(1 << 14)
+#define DP83848_100BASE_TX_HD	(1 << 13)
+#define DP83848_10BASE_T_FD	(1 << 12)
+#define DP83848_10BASE_T_HD	(1 << 11)
+#define DP83848_MF_PREAMB_SUPPR	(1 << 6)
+#define DP83848_AUTONEG_COMP	(1 << 5)
+#define DP83848_RMT_FAULT	(1 << 4)
+#define DP83848_AUTONEG_ABILITY	(1 << 3)
+#define DP83848_LINK_STATUS	(1 << 2)
+#define DP83848_JABBER_DETECT	(1 << 1)
+#define DP83848_EXTEND_CAPAB	(1 << 0)
+
+/*--definitions: DP83848_PHYID1 */
+#define DP83848_PHYID1_OUI	0x2000
+#define DP83848_PHYID2_OUI	0x5c90
+
+/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
+#define DP83848_NP		(1 << 15)
+#define DP83848_ACK		(1 << 14)
+#define DP83848_RF		(1 << 13)
+#define DP83848_PAUSE		(1 << 10)
+#define DP83848_T4		(1 << 9)
+#define DP83848_TX_FDX		(1 << 8)
+#define DP83848_TX_HDX		(1 << 7)
+#define DP83848_10_FDX		(1 << 6)
+#define DP83848_10_HDX		(1 << 5)
+#define DP83848_AN_IEEE_802_3	0x0001
+
+/*--Bit definitions: DP83848_ANER */
+#define DP83848_PDF		(1 << 4)
+#define DP83848_LP_NP_ABLE	(1 << 3)
+#define DP83848_NP_ABLE		(1 << 2)
+#define DP83848_PAGE_RX		(1 << 1)
+#define DP83848_LP_AN_ABLE	(1 << 0)
+
+/*--Bit definitions: DP83848_PHY_STAT */
+#define DP83848_RX_ERR_LATCH		(1 << 13)
+#define DP83848_POLARITY_STAT		(1 << 12)
+#define DP83848_FALSE_CAR_SENSE		(1 << 11)
+#define DP83848_SIG_DETECT		(1 << 10)
+#define DP83848_DESCRAM_LOCK		(1 << 9)
+#define DP83848_PAGE_RCV		(1 << 8)
+#define DP83848_PHY_RMT_FAULT		(1 << 6)
+#define DP83848_JABBER			(1 << 5)
+#define DP83848_AUTONEG_COMPLETE	(1 << 4)
+#define DP83848_LOOPBACK_STAT		(1 << 3)
+#define DP83848_DUPLEX			(1 << 2)
+#define DP83848_SPEED			(1 << 1)
+#define DP83848_LINK			(1 << 0)