Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master

author: Wolfgang Denk <wd@denx.de> 2010-10-25 08:06:52 +0200
committer: Wolfgang Denk <wd@denx.de> 2010-10-25 08:06:52 +0200
commit: c163f4478ca72f51b28b55f74addc8fe029d7b83 (patch)
tree: 914495b79944d55ff161fd7611d46ee7ab523978 /include/configs
parent: 9038e0e7029e47ec1700128351281225f711545e (diff)
parent: 6d79c39958aa0245e59f33860cd1ddd589119968 (diff)
download: u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.zip
u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.tar.gz
u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.tar.bz2
36 files changed, 863 insertions, 823 deletions
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 9702d63..c8e0ff2 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -139,9 +139,9 @@
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST	{CONFIG_SYS_I2C_PICIO_ADDR,	\
-			CONFIG_SYS_I2C_RTC_ADDR,	\
-			}
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_PICIO_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					}
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 9613ed9..ce731e3 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -149,9 +149,9 @@
 
 /* List of I2C addresses to be verified by POST */
 
-#define I2C_ADDR_LIST	{CONFIG_SYS_I2C_PICIO_ADDR,	\
-			CONFIG_SYS_I2C_RTC_ADDR,	\
-			}
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_PICIO_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					}
 
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 04d97cd..44d45e3 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -324,7 +324,7 @@
 #define CONFIG_SYS_SCCR_TSEC1CM	1
 #define CONFIG_SYS_SCCR_TSEC2CM	1
 
-#define CONFIG_SYS_SICRH	0x1fff8003
+#define CONFIG_SYS_SICRH	0x1fef0003
 #define CONFIG_SYS_SICRL	(SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index ad86e2e..f336e8d 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -251,10 +251,10 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
 
 /* List of I2C addresses to be verified by POST */
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
-				CONFIG_SYS_I2C_RTC_ADDR,	\
-				CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					 CONFIG_SYS_I2C_SLAVE}
 
 /*
  * Flash configuration
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2612c7a..794e11b 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -370,10 +370,10 @@
 
 /* List of I2C addresses to be verified by POST */
 #if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
-				CONFIG_SYS_I2C_HWMON_ADDR,	\
-				CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_HWMON_ADDR,	\
+					 CONFIG_SYS_I2C_SLAVE}
 #endif
 
 /*
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
index 24a04eb..f18bc45 100644
--- a/include/configs/a4m072.h
+++ b/include/configs/a4m072.h
@@ -147,27 +147,43 @@
 #define CONFIG_PREBOOT				"run try_update"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"bk=run add_mtd ; run add_consolespec ; bootm 200000\0"	\
-	"cf1=diskboot 200000 0:1\0"	\
-	"bootcmd_cf1=run bcf1\0"	\
-	"bcf=setenv bootargs root=/dev/hda3\0"	\
-	"bootcmd_nfs=run bnfs\0"	\
-	"norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0"	\
-	"bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0"	\
-	"bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0"	\
-	"try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0"	\
-	"env_addr=FE060000\0"	\
-	"kernel_addr=FE100000\0"	\
-	"rootfs_addr=FE200000\0"	\
-	"add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0"	\
-	"bcf1=run cf1; run bcf; run addip; run bk\0"	\
-	"add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0"	\
-	"addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0"	\
-	"hostname=CPUP0\0"	\
-	"ethaddr=00:00:00:00:00:00\0"	\
-	"netdev=eth0\0"	\
-	"bootcmd=run bootcmd_nor\0" \
+	"bk=run add_mtd ; run add_consolespec ; bootm 200000\0"		\
+	"cf1=diskboot 200000 0:1\0"					\
+	"bootcmd_cf1=run bcf1\0"					\
+	"bcf=setenv bootargs root=/dev/hda3\0"				\
+	"bootcmd_nfs=run bnfs\0"					\
+	"norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
+		"panic=1\0"						\
+	"bootcmd_nor=cp.b ${kernel_addr} 200000 100000;"		\
+			"run norargs addip; run bk\0"			\
+	"bnfs=nfs 200000 ${rootpath}/boot/uImage;"			\
+			"run nfsargs addip ; run bk\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+				"nfsroot=${serverip}:${rootpath}\0"	\
+	"try_update=usb start;sleep 2;usb start;sleep 1;"		\
+			"fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;"	\
+			"source 2F0000\0"				\
+	"env_addr=FE060000\0"						\
+	"kernel_addr=FE100000\0"					\
+	"rootfs_addr=FE200000\0"					\
+	"add_mtd=setenv bootargs ${bootargs} mtdparts="			\
+		"phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0"	\
+	"bcf1=run cf1; run bcf; run addip; run bk\0"			\
+	"add_consolespec=setenv bootargs ${bootargs} "			\
+				"console=/dev/null quiet\0"		\
+	"addip=if test -n ${ethaddr};"					\
+		"then if test -n ${ipaddr};"				\
+			"then setenv bootargs ${bootargs} "		\
+				"ip=${ipaddr}:${serverip}:${gatewayip}:"\
+				"${netmask}:${hostname}:${netdev}:off;"	\
+			"fi;"						\
+		"else;"							\
+			"setenv bootargs ${bootargs} no_ethaddr;"	\
+		"fi\0"							\
+	"hostname=CPUP0\0"						\
+	"ethaddr=00:00:00:00:00:00\0"					\
+	"netdev=eth0\0"							\
+	"bootcmd=run bootcmd_nor\0" 					\
 	""
 /*
  * IPB Bus clocking configuration.
@@ -212,6 +228,7 @@
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_CS0_START}
+#define CONFIG_SYS_FLASH_BANKS_SIZES	{CONFIG_SYS_CS0_SIZE}
 
 /*
  * Environment settings
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index 98b69e3..a0726a9 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -38,6 +38,7 @@
 #define CONFIG_CERF250		1	/* on Cerf PXA Board	    */
 #define BOARD_LATE_INIT		1
 #define CONFIG_BAUDRATE		38400
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #undef	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
@@ -140,15 +141,9 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	4			/* we have 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS		1		/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
-#define PHYS_SDRAM_2			0xa4000000	/* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 MB */
-#define PHYS_SDRAM_3			0xa8000000	/* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE		0x00000000	/* 0 MB */
-#define PHYS_SDRAM_4			0xac000000	/* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE		0x00000000	/* 0 MB */
 
 #define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
 #define PHYS_FLASH_2			0x04000000	/* Flash Bank #2 */
@@ -187,6 +182,9 @@
 
 #define CONFIG_SYS_PSSR_VAL		0x20
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  */
@@ -196,6 +194,8 @@
 #define CONFIG_SYS_MDCNFG_VAL		0x00001AC9
 #define CONFIG_SYS_MDREFR_VAL		0x03CDC017
 #define CONFIG_SYS_MDMRS_VAL		0x00000000
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 1b129a2..af6769b 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -80,7 +80,9 @@
 #define CONFIG_POST		(CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
 #define MPC5XXX_SRAM_POST_SIZE	(MPC5XXX_SRAM_SIZE - 4)
 /* List of I2C addresses to be verified by POST */
-#define I2C_ADDR_LIST		{ CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM }
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_SLAVE,	\
+					 CONFIG_SYS_I2C_IO,	\
+					 CONFIG_SYS_I2C_EEPROM}
 
 /* display image timestamps */
 #define CONFIG_TIMESTAMP	1
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 5f457f8..afc1537 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -39,7 +39,7 @@
 #define	CONFIG_ENV_SIZE			0x4000
 #define	CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
 #define	CONFIG_SYS_GBL_DATA_SIZE	128
-
+#define	CONFIG_SYS_TEXT_BASE		0x0
 #define	CONFIG_ENV_OVERWRITE		/* override default environment */
 
 #define	CONFIG_BOOTCOMMAND						\
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 85147d0..2733fb2 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -213,7 +213,7 @@
 #endif
 #define CONFIG_SYS_INIT_RAM_END		0x00004000	/* End of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index d1c1a48..3da3562 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -39,7 +39,7 @@
 
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_NO_DCACHE
-
+#define	CONFIG_SYS_TEXT_BASE		0x0
 /*
  * Size of malloc() pool
  */
@@ -126,15 +126,9 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS    4          /* we have 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS    1          /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1            0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE       0x01000000 /* 64 MB */
-#define PHYS_SDRAM_2            0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE       0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3            0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE       0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4            0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE       0x00000000 /* 0 MB */
 
 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2            0x04000000 /* Flash Bank #1 */
@@ -289,9 +283,9 @@
  * Clocks, power control and interrupts
  */
 #define CONFIG_SYS_PSSR_VAL        0x00000020
-#define CONFIG_SYS_CCCR_VAL        0x00000141  /* 100 MHz memory, 200 MHz CPU  */
-#define CONFIG_SYS_CKEN_VAL        0x00000060  /* FFUART and STUART enabled    */
-#define CONFIG_SYS_ICMR_VAL        0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_CCCR        0x00000141  /* 100 MHz memory, 200 MHz CPU  */
+#define CONFIG_SYS_CKEN        0x00000060  /* FFUART and STUART enabled    */
+#define CONFIG_SYS_ICMR        0x00000000  /* No interrupts enabled        */
 
 /* FIXME
  *
@@ -319,6 +313,8 @@
 #define CONFIG_SYS_MDMRS_VAL       0x00000000
 #define CONFIG_SYS_MDREFR_VAL      0x00403018  /* Initial setting, individual bits set in lowlevel_init.S */
 #endif
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index ae05734..72e47ce 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -45,7 +45,7 @@
 
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_NO_DCACHE
-
+#define	CONFIG_SYS_TEXT_BASE	0x0
 /*
  * Hardware drivers
  */
@@ -458,6 +458,9 @@
 
 #define CONFIG_SYS_PSSR_VAL        0x20
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  */
@@ -468,6 +471,8 @@
 #define CONFIG_SYS_MDCNFG_VAL          0x09a909a9
 #define CONFIG_SYS_MDREFR_VAL          0x038ff030
 #define CONFIG_SYS_MDMRS_VAL           0x00220022
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/delta.h b/include/configs/delta.h
deleted file mode 100644
index d53acbf..0000000
--- a/include/configs/delta.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Configuation settings for the Delta board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_MONAHANS	1	/* Intel Monahan CPU    */
-#define	CONFIG_CPU_PXA320
-#define CONFIG_DELTA		1	/* Delta board       */
-
-/* #define CONFIG_LCD		1 */
-#ifdef CONFIG_LCD
-#define CONFIG_SHARP_LM8V31
-#endif
-#define BOARD_LATE_INIT		1
-
-#undef CONFIG_SKIP_RELOCATE_UBOOT
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 256*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-#undef TURN_ON_ETHERNET
-#ifdef TURN_ON_ETHERNET
-# define CONFIG_DRIVER_SMC91111 1
-# define CONFIG_SMC91111_BASE   0x14000300
-# define CONFIG_SMC91111_EXT_PHY
-# define CONFIG_SMC_USE_32_BIT
-# undef CONFIG_SMC_USE_IOFUNCS          /* just for use with the kernel */
-#endif
-
-#define CONFIG_HARD_I2C		1	/* required for DA9030 access */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE		1	/* I2C controllers address */
-#define DA9030_I2C_ADDR		0x49	/* I2C address of DA9030 */
-#define CONFIG_SYS_DA9030_EXTON_DELAY	100000	/* wait x us after DA9030 reset via EXTON */
-#define CONFIG_SYS_I2C_INIT_BOARD	1
-/* #define CONFIG_HW_WATCHDOG	1	/\* Required for hitting the DA9030 WD *\/ */
-
-#define DELTA_CHECK_KEYBD	1	/* check for keys pressed during boot */
-#define CONFIG_PREBOOT		"\0"
-
-#ifdef DELTA_CHECK_KEYBD
-# define KEYBD_DATALEN		4	/* we have four keys */
-# define KEYBD_KP_DKIN0		0x1	/* vol+ */
-# define KEYBD_KP_DKIN1		0x2	/* vol- */
-# define KEYBD_KP_DKIN2		0x3	/* multi */
-# define KEYBD_KP_DKIN5		0x4	/* SWKEY_GN */
-#endif /* DELTA_CHECK_KEYBD */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART		1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifdef TURN_ON_ETHERNET
-
-#define CONFIG_CMD_PING
-
-#else
-
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_I2C
-
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#endif
-
-/* USB */
-#define CONFIG_USB_OHCI_NEW	1
-#define CONFIG_USB_STORAGE      1
-#define CONFIG_DOS_PARTITION    1
-
-#include <asm/arch/pxa-regs.h> /* for OHCI_REGS_BASE */
-
-#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"delta"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
-
-#define CONFIG_BOOTDELAY	-1
-#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
-#define CONFIG_NETMASK		255.255.0.0
-#define CONFIG_IPADDR		192.168.0.21
-#define CONFIG_SERVERIP		192.168.0.250
-#define CONFIG_BOOTCOMMAND	"bootm 80000"
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_TIMESTAMP
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_DEVICE_NULLDEV	1
-
-#define CONFIG_SYS_MEMTEST_START	0x80400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x80800000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
-
-#define CONFIG_SYS_HZ			1000
-
-/* Monahans Core Frequency */
-#define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
-#define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO	1  /* valid values: 1, 2 */
-
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_BASE		0xF0000000
-#endif
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1		0x80000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x1000000  /* 64 MB */
-#define PHYS_SDRAM_2		0x81000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE	0x1000000  /* 64 MB */
-#define PHYS_SDRAM_3		0x82000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE	0x1000000  /* 64 MB */
-#define PHYS_SDRAM_4		0x83000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE	0x1000000  /* 64 MB */
-
-#define CONFIG_SYS_DRAM_BASE		0x80000000 /* at CS0 */
-#define CONFIG_SYS_DRAM_SIZE		0x04000000 /* 64 MB Ram */
-
-#undef CONFIG_SYS_SKIP_DRAM_SCRUB
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * NAND Flash
- */
-#define CONFIG_SYS_NAND0_BASE		0x0 /* 0x43100040 */ /* 0x10000000 */
-#undef CONFIG_SYS_NAND1_BASE
-
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND0_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
-
-/* nand timeout values */
-#define CONFIG_SYS_NAND_PROG_ERASE_TO	3000
-#define CONFIG_SYS_NAND_OTHER_TO	100
-#define CONFIG_SYS_NAND_SENDCMD_RETRY	3
-#undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
-
-/* NAND Timing Parameters (in ns) */
-#define NAND_TIMING_tCH		10
-#define NAND_TIMING_tCS		0
-#define NAND_TIMING_tWH		20
-#define NAND_TIMING_tWP		40
-
-#define NAND_TIMING_tRH		20
-#define NAND_TIMING_tRP		40
-
-#define NAND_TIMING_tR		11123
-#define NAND_TIMING_tWHR	100
-#define NAND_TIMING_tAR		10
-
-/* NAND debugging */
-#define CONFIG_SYS_DFC_DEBUG1 /* usefull */
-#undef CONFIG_SYS_DFC_DEBUG2  /* noisy */
-#undef CONFIG_SYS_DFC_DEBUG3  /* extremly noisy  */
-
-#define CONFIG_MTD_DEBUG
-#define CONFIG_MTD_DEBUG_VERBOSE 1
-
-#define CONFIG_SYS_NO_FLASH		1
-
-#define CONFIG_ENV_IS_IN_NAND	1
-#define CONFIG_ENV_OFFSET		0x40000
-#define CONFIG_ENV_OFFSET_REDUND	0x44000
-#define CONFIG_ENV_SIZE		0x4000
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 007cceb..01522cd 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -40,6 +40,8 @@
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
 
+#define	CONFIG_SYS_TEXT_BASE	0x0
+
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_NO_DCACHE
 
@@ -347,6 +349,9 @@
  */
 #define CONFIG_SYS_PSSR_VAL		0x37
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  *
@@ -480,6 +485,9 @@
 #define CONFIG_SYS_MCIO0_VAL		0x00000000
 #define CONFIG_SYS_MCIO1_VAL		0x00000000
 
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
+
 /*
 #define CSB226_USER_LED0	0x00000008
 #define CSB226_USER_LED1	0x00000010
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 3a99ec2..62f9691 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -43,7 +43,7 @@
 #define CONFIG_MMC
 #define BOARD_LATE_INIT		1
 #define CONFIG_DOS_PARTITION
-
+#define	CONFIG_SYS_TEXT_BASE	0x0
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
 /* we will never enable dcache, because we have to setup MMU first */
@@ -202,6 +202,9 @@
 
 #define CONFIG_SYS_PSSR_VAL		0x20
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  */
@@ -212,6 +215,9 @@
 #define CONFIG_SYS_MDREFR_VAL		0x00018018
 #define CONFIG_SYS_MDMRS_VAL		0x00000000
 
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 1062765..9e48857 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -349,32 +349,32 @@
 
 /* List of I2C addresses to be verified by POST */
 #ifdef CONFIG_USE_FRAM
-#define I2C_ADDR_LIST	{  /*	CONFIG_SYS_I2C_AUDIO_ADDR, */	\
-				CONFIG_SYS_I2C_SYSMON_ADDR,	\
-				CONFIG_SYS_I2C_RTC_ADDR,	\
-				CONFIG_SYS_I2C_POWER_A_ADDR,	\
-				CONFIG_SYS_I2C_POWER_B_ADDR,	\
-				CONFIG_SYS_I2C_KEYBD_ADDR,	\
-				CONFIG_SYS_I2C_PICIO_ADDR,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR,	\
-			}
+#define CONFIG_SYS_POST_I2C_ADDRS	{/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+					 CONFIG_SYS_I2C_SYSMON_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					 CONFIG_SYS_I2C_POWER_A_ADDR,	\
+					 CONFIG_SYS_I2C_POWER_B_ADDR,	\
+					 CONFIG_SYS_I2C_KEYBD_ADDR,	\
+					 CONFIG_SYS_I2C_PICIO_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					}
 #else	/* Use EEPROM - which show up on 8 consequtive addresses */
-#define I2C_ADDR_LIST	{  /*	CONFIG_SYS_I2C_AUDIO_ADDR, */	\
-				CONFIG_SYS_I2C_SYSMON_ADDR,	\
-				CONFIG_SYS_I2C_RTC_ADDR,	\
-				CONFIG_SYS_I2C_POWER_A_ADDR,	\
-				CONFIG_SYS_I2C_POWER_B_ADDR,	\
-				CONFIG_SYS_I2C_KEYBD_ADDR,	\
-				CONFIG_SYS_I2C_PICIO_ADDR,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+0,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+1,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+2,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+3,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+4,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+5,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+6,	\
-				CONFIG_SYS_I2C_EEPROM_ADDR+7,	\
-			}
+#define CONFIG_SYS_POST_I2C_ADDRS	{/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \
+					 CONFIG_SYS_I2C_SYSMON_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					 CONFIG_SYS_I2C_POWER_A_ADDR,	\
+					 CONFIG_SYS_I2C_POWER_B_ADDR,	\
+					 CONFIG_SYS_I2C_KEYBD_ADDR,	\
+					 CONFIG_SYS_I2C_PICIO_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+0,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+1,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+2,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+3,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+4,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+5,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+6,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR+7,	\
+					}
 #endif	/* CONFIG_USE_FRAM */
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index a4e92cc..63e22d4 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -306,14 +306,13 @@
 #define CONFIG_SYS_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard		*/
 #define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57	/* PIC I/O addr               */
 
-#define I2C_ADDR_LIST	{						\
-			CONFIG_SYS_I2C_RTC_ADDR,			\
-			CONFIG_SYS_I2C_EEPROM_CPU_ADDR,			\
-			CONFIG_SYS_I2C_EEPROM_MB_ADDR,			\
-			CONFIG_SYS_I2C_DSPIC_ADDR,			\
-			CONFIG_SYS_I2C_DSPIC_2_ADDR,			\
-			CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,			\
-			CONFIG_SYS_I2C_DSPIC_IO_ADDR }
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_RTC_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\
+					 CONFIG_SYS_I2C_EEPROM_MB_ADDR,	\
+					 CONFIG_SYS_I2C_DSPIC_ADDR,	\
+					 CONFIG_SYS_I2C_DSPIC_2_ADDR,	\
+					 CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
+					 CONFIG_SYS_I2C_DSPIC_IO_ADDR }
 
 /*
  * Pass open firmware flat tree
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index 926728b..a2310a9 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -34,6 +34,7 @@
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_SYS_GBL_DATA_SIZE	128
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #define	CONFIG_BOOTCOMMAND						\
 	"if mmcinfo && fatload mmc 0 0xa0000000 uboot.script ; then "	\
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index fe87648..40ab0bf 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -36,6 +36,7 @@
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_SYS_GBL_DATA_SIZE	128
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #define	CONFIG_BOOTCOMMAND						\
 	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then "	\
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index 3b6e60a..b366f38 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -39,6 +39,7 @@
 #undef CONFIG_LCD
 #undef CONFIG_MMC
 #define BOARD_LATE_INIT		1
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
@@ -155,15 +156,9 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
 
 #define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
@@ -213,9 +208,9 @@
 #define CONFIG_SYS_GAFR2_U_VAL		0x00000000
 
 #define CONFIG_SYS_PSSR_VAL		0x20
-#define CONFIG_SYS_CCCR_VAL	    0x00000141	/* 100 MHz memory, 200 MHz CPU	*/
-#define CONFIG_SYS_CKEN_VAL	    0x00000060	/* FFUART and STUART enabled	*/
-#define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+#define CONFIG_SYS_CCCR		    0x00000141	/* 100 MHz memory, 200 MHz CPU	*/
+#define CONFIG_SYS_CKEN		    0x00000060	/* FFUART and STUART enabled	*/
+#define CONFIG_SYS_ICMR		    0x00000000	/* No interrupts enabled	*/
 
 /*
  * Memory settings
@@ -231,6 +226,9 @@
 					   /* bits set in lowlevel_init.S	*/
 #define CONFIG_SYS_MDMRS_VAL		0x00000000
 
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 4581674..b4327c6 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -43,6 +43,7 @@
  */
 #undef CONFIG_SKIP_LOWLEVEL_INIT			/* define for developing */
 #undef CONFIG_SKIP_RELOCATE_UBOOT			/* define for developing */
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 /*
  * define the following to enable debug blinks.  A debug blink function
@@ -271,7 +272,7 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	4	   /* we have 1 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
 #define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
@@ -317,6 +318,9 @@
 
 #define CONFIG_SYS_PSSR_VAL		0x20
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  */
@@ -326,6 +330,8 @@
 #define CONFIG_SYS_MDCNFG_VAL		0x090009C9
 #define CONFIG_SYS_MDREFR_VAL		0x0085C017
 #define CONFIG_SYS_MDMRS_VAL		0x00220022
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 2c18e2f..6627f99 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -62,8 +62,10 @@
 
 /* MEMORY */
 #if defined(CONFIG_SH_32BIT)
-#define SH7785LCR_SDRAM_PHYS_BASE	(0x48000000)
-#define SH7785LCR_SDRAM_BASE		(0x88000000)
+/* 0x40000000 - 0x47FFFFFF does not use */
+#define CONFIG_SH_SDRAM_OFFSET		(0x8000000)
+#define SH7785LCR_SDRAM_PHYS_BASE	(0x40000000 + CONFIG_SH_SDRAM_OFFSET)
+#define SH7785LCR_SDRAM_BASE		(0x80000000 + CONFIG_SH_SDRAM_OFFSET)
 #define SH7785LCR_SDRAM_SIZE		(384 * 1024 * 1024)
 #define SH7785LCR_FLASH_BASE_1		(0xa0000000)
 #define SH7785LCR_FLASH_BANK_SIZE	(64 * 1024 * 1024)
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index b5ac168..880c8a3 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -271,10 +271,10 @@
 
 /* List of I2C addresses to be verified by POST */
 #if defined (CONFIG_MINIFAP)
-#undef I2C_ADDR_LIST
-#define I2C_ADDR_LIST	{	CONFIG_SYS_I2C_EEPROM_ADDR,	\
-				CONFIG_SYS_I2C_HWMON_ADDR,	\
-				CONFIG_SYS_I2C_SLAVE }
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_HWMON_ADDR,	\
+					 CONFIG_SYS_I2C_SLAVE}
 #endif
 
 /*
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 4743495..ac3566c 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -44,6 +44,7 @@
 
 #define CONFIG_MMC		1
 #define BOARD_LATE_INIT		1
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index a2ecbe5..d2d9565 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -211,4 +211,18 @@
 
 #define CONFIG_SYS_NO_FLASH
 
+/*
+ * Framebuffer and LCD
+ */
+#define CONFIG_PREBOOT
+#define CONFIG_LCD
+#define CONFIG_VIDEO_MX5
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define LCD_BPP		LCD_COLOR16
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+
 #endif				/* __CONFIG_H */
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c9d9c69..3107014 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -27,6 +27,7 @@
  */
 #define	CONFIG_PXA27X		1	/* Marvell PXA270 CPU */
 #define	CONFIG_VPAC270		1	/* Voipac PXA270 board */
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 /*
  * Environment settings
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
deleted file mode 100644
index a961a27..0000000
--- a/include/configs/wepep250.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Copyright (C) 2003 ETC s.r.o.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Written by Peter Figuli <peposh@etc.sk>, 2003.
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_PXA250          1        /* this is an PXA250 CPU     */
-#define CONFIG_WEPEP250        1        /* config for wepep250 board */
-#undef  CONFIG_USE_IRQ                  /* don't need use IRQ/FIQ    */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
-
-/*
- * Select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_BTUART          1       /* BTUART is default on WEP dev board */
-#define CONFIG_BAUDRATE   115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_SOURCE
-
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- * NOTE: Sending parameters to kernel depends on kernel version and
- * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
- * parameters at all! Do not get confused by them so.
- */
-#define CONFIG_BOOTDELAY   -1
-#define CONFIG_BOOTARGS    "root=/dev/mtdblock2 mem=32m console=ttyS01,115200n8"
-#define CONFIG_BOOTCOMMAND "bootm 40000"
-
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP                                  /* undef saves memory  */
-#define CONFIG_SYS_PROMPT              "WEP> "               /* prompt string       */
-#define CONFIG_SYS_CBSIZE              256                   /* console I/O buffer  */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
-#define CONFIG_SYS_MAXARGS             16                    /* max command args    */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE            /* boot args buf size  */
-
-#define CONFIG_SYS_MEMTEST_START       0xa0400000            /* memtest test area   */
-#define CONFIG_SYS_MEMTEST_END         0xa0800000
-
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_CPUSPEED            0x141        /* core clock - register value  */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG           1   /* send commandline to Kernel       */
-#define CONFIG_SETUP_MEMORY_TAGS     1   /* send memory definition to kernel */
-#undef  CONFIG_INITRD_TAG                /* do not send initrd params        */
-#undef  CONFIG_VFD                       /* do not send framebuffer setup    */
-
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN	  (CONFIG_ENV_SIZE + (128<<10) )
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-
-#define CONFIG_STACKSIZE        (120<<10)      /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4<<10)        /* IRQ stack  */
-#define CONFIG_STACKSIZE_FIQ    (4<<10)        /* FIQ stack  */
-#endif
-
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS    1                /* we have 1 bank of SDRAM */
-#define WEP_SDRAM_1            0xa0000000        /* SDRAM bank #1           */
-#define WEP_SDRAM_1_SIZE       0x02000000        /* 32 MB ( 2 chip )        */
-#define WEP_SDRAM_2            0xa2000000        /* SDRAM bank #2           */
-#define WEP_SDRAM_2_SIZE       0x00000000        /* 0 MB                    */
-#define WEP_SDRAM_3            0xa8000000        /* SDRAM bank #3           */
-#define WEP_SDRAM_3_SIZE       0x00000000        /* 0 MB                    */
-#define WEP_SDRAM_4            0xac000000        /* SDRAM bank #4           */
-#define WEP_SDRAM_4_SIZE       0x00000000        /* 0 MB                    */
-
-#define CONFIG_SYS_DRAM_BASE           0xa0000000
-#define CONFIG_SYS_DRAM_SIZE           0x02000000
-
-/* Uncomment used SDRAM chip */
-#define WEP_SDRAM_K4S281633
-/*#define WEP_SDRAM_K4S561633*/
-
-
-/*
- * Configuration for FLASH memory
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* number of sector in FLASH bank    */
-#define WEP_FLASH_BUS_WIDTH	4	/* we use 32 bit FLASH memory...     */
-#define WEP_FLASH_INTERLEAVE	2	/* ... made of 2 chips */
-#define WEP_FLASH_BANK_SIZE  0x2000000  /* size of one flash bank*/
-#define WEP_FLASH_SECT_SIZE  0x0040000  /* size of erase sector */
-#define WEP_FLASH_BASE       0x0000000  /* location of flash memory */
-#define WEP_FLASH_UNLOCK        1       /* perform hw unlock first */
-
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
-   is not so clear to me. In other words we can provide more informations
-   to user, but this expects more complex flash handling we do not provide
-   now.*/
-#undef  CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ)    /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE          WEP_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#define CONFIG_SYS_JFFS2_FIRST_BANK		0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR		5
-#define CONFIG_SYS_JFFS2_NUM_BANKS		1
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-#define CONFIG_SYS_MONITOR_BASE	PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128kb ( 1 flash sector )  */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20000	        /* absolute address for now  */
-#define CONFIG_ENV_SIZE		0x2000
-
-#define	PHYS_SDRAM_1			WEP_SDRAM_1
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-#undef  CONFIG_ENV_OVERWRITE                    /* env is not writable now   */
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR        0x40000
-
-#endif  /* __CONFIG_H */
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 67d4106..18b68fa 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -42,6 +42,7 @@
  */
 #define CONFIG_PXA250		1	/* This is an PXA255 CPU    */
 #define CONFIG_XAENIAX		1	/* on a xaeniax board	    */
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 
 #define BOARD_LATE_INIT		1
@@ -437,8 +438,9 @@
  */
 #define CONFIG_SYS_PSSR_VAL		0x00000030
 
-#define CONFIG_SYS_CKEN_VAL            0x00000080  /*  */
-#define CONFIG_SYS_ICMR_VAL            0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_CKEN			0x00000080  /*  */
+#define CONFIG_SYS_ICMR			0x00000000  /* No interrupts enabled        */
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
 
 
 /*
@@ -562,6 +564,9 @@
  */
 #define CONFIG_SYS_MDMRS_VAL		0x00320032
 
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 2ff9a28..ea52454 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -35,6 +35,7 @@
 #define CONFIG_PXA250	       1	/* This is an PXA250 CPU	*/
 #define CONFIG_XM250	       1	/* on a MicroSys XM250 Board	*/
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_NO_DCACHE
@@ -322,9 +323,9 @@
  * Clocks, power control and interrupts
  */
 #define CONFIG_SYS_PSSR_VAL	    0x00000030
-#define CONFIG_SYS_CCCR_VAL	    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
-#define CONFIG_SYS_CKEN_VAL	    0x000141ec	/* FFUART and STUART enabled	*/
-#define CONFIG_SYS_ICMR_VAL	    0x00000000	/* No interrupts enabled	*/
+#define CONFIG_SYS_CCCR		    0x00000161	/* 100 MHz memory, 400 MHz CPU, 400 Turbo  */
+#define CONFIG_SYS_CKEN		    0x000141ec	/* FFUART and STUART enabled	*/
+#define CONFIG_SYS_ICMR		    0x00000000	/* No interrupts enabled	*/
 
 /* FIXME
  *
@@ -343,6 +344,8 @@
 #define CONFIG_SYS_MDCNFG_VAL	    0x000009c9
 #define CONFIG_SYS_MDMRS_VAL	    0x00220022
 #define CONFIG_SYS_MDREFR_VAL	    0x000da018	/* Initial setting, individual bits set in lowlevel_init.S */
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
 
 /*
  * PCMCIA and CF Interfaces (NOT USED, these values from lubbock init)
diff --git a/include/configs/XPEDITE1000.h b/include/configs/xpedite1000.h
index 5605849..d0f9363 100644
--- a/include/configs/XPEDITE1000.h
+++ b/include/configs/xpedite1000.h
@@ -33,6 +33,7 @@
 /* High Level Configuration Options */
 #define CONFIG_XPEDITE1000	1
 #define CONFIG_SYS_BOARD_NAME	"XPedite1000"
+#define CONFIG_SYS_FORM_PMC	1
 #define CONFIG_4xx		1		/* ... PPC4xx family */
 #define CONFIG_440		1
 #define CONFIG_440GX		1		/* 440 GX */
@@ -341,8 +342,8 @@ extern void out32(unsigned int, unsigned long);
 	"misc_args=ip=on\0"						\
 	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 	"bootfile=/home/user/file\0"					\
-	"osfile=/home/user/uImage-XPedite1000\0"			\
-	"fdtfile=/home/user/xpedite1000.dtb\0"				\
+	"osfile=/home/user/board.uImage\0"				\
+	"fdtfile=/home/user/board.dtb\0"				\
 	"ubootfile=/home/user/u-boot.bin\0"				\
 	"fdtaddr=c00000\0"						\
 	"osaddr=0x1000000\0"						\
diff --git a/include/configs/XPEDITE5170.h b/include/configs/xpedite517x.h
index 1851997..8df9edd 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/xpedite517x.h
@@ -22,7 +22,7 @@
  */
 
 /*
- * xpedite5170 board configuration file
+ * xpedite517x board configuration file
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -34,6 +34,7 @@
 #define CONFIG_MPC8641		1	/* MPC8641 specific */
 #define CONFIG_XPEDITE5140	1	/* MPC8641HPCN board specific */
 #define CONFIG_SYS_BOARD_NAME	"XPedite5170"
+#define CONFIG_SYS_FORM_3U_VPX	1
 #define CONFIG_LINUX_RESET_VEC	0x100	/* Reset vector used by Linux */
 #define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
 #define CONFIG_BAT_RW		1	/* Use common BAT rw code */
@@ -107,6 +108,21 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_POST			(CONFIG_SYS_POST_MEMORY |\
+					 CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_DS1621_ADDR,	\
+					 CONFIG_SYS_I2C_DS4510_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_LM90_ADDR,	\
+					 CONFIG_SYS_I2C_PCA9553_ADDR,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
+					 CONFIG_SYS_I2C_PEX8518_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST		{0x50}
 
 /*
  * Memory map
@@ -258,6 +274,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_DS1621_ADDR	0x48
 #define CONFIG_DTT_DS1621
 #define CONFIG_DTT_SENSORS		{ 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR	0x4c
 
 /* I2C EEPROM - AT24C128B */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
@@ -281,6 +298,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PCA953X_ADDR2	0x1e
 #define CONFIG_SYS_I2C_PCA953X_ADDR3	0x1f
 #define CONFIG_SYS_I2C_PCA953X_ADDR	CONFIG_SYS_I2C_PCA953X_ADDR0
+#define CONFIG_SYS_I2C_PCA9553_ADDR	0x62
 
 /*
  * PU = pulled high, PD = pulled low
@@ -324,18 +342,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 /* PCIE1 - PEX8518 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x40000000	/* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe8000000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
 
 /* PCIE2 - VPX P1 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xe8800000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000	/* 8M */
 
@@ -545,6 +563,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
@@ -725,8 +744,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"misc_args=ip=on\0"						\
 	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 	"bootfile=/home/user/file\0"					\
-	"osfile=/home/user/uImage-XPedite5170\0"			\
-	"fdtfile=/home/user/xpedite5170.dtb\0"				\
+	"osfile=/home/user/board.uImage\0"				\
+	"fdtfile=/home/user/board.dtb\0"				\
 	"ubootfile=/home/user/u-boot.bin\0"				\
 	"fdtaddr=c00000\0"						\
 	"osaddr=0x1000000\0"						\
diff --git a/include/configs/XPEDITE5200.h b/include/configs/xpedite520x.h
index d0e9492..2f31337 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/xpedite520x.h
@@ -22,7 +22,7 @@
  */
 
 /*
- * xpedite5200 board configuration file
+ * xpedite520x board configuration file
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8548		1
 #define CONFIG_XPEDITE5200	1
 #define CONFIG_SYS_BOARD_NAME	"XPedite5200"
+#define CONFIG_SYS_FORM_PMC_XMC	1
 #define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -92,6 +93,13 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
+					 CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_MAX1237_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
+					 CONFIG_SYS_I2C_RTC_ADDR}
 
 /*
  * Memory map
@@ -250,7 +258,7 @@
 #define CONFIG_SYS_PCA953X_BRD_CFG2		0x04
 #define CONFIG_SYS_PCA953X_XMC_ROOT0		0x08
 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS	0x10
-#define CONFIG_SYS_PCA953X_FLASH_WP		0x20
+#define CONFIG_SYS_PCA953X_NVM_WP		0x20
 #define CONFIG_SYS_PCA953X_MONARCH		0x40
 #define CONFIG_SYS_PCA953X_EREADY		0x80
 
@@ -264,14 +272,17 @@
 #define CONFIG_SYS_PCA953X_P14_IO6		0x40
 #define CONFIG_SYS_PCA953X_P14_IO7		0x80
 
+/* 12-bit ADC used to measure CPU diode */
+#define CONFIG_SYS_I2C_MAX1237_ADDR		0x34
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BUS
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x40000000	/* 1G */
-#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS		0xe8000000
 #define CONFIG_SYS_PCI1_IO_SIZE		0x00800000	/* 1M */
 
@@ -339,6 +350,7 @@
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_REGINFO
@@ -521,8 +533,8 @@
 	"misc_args=ip=on\0"						\
 	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 	"bootfile=/home/user/file\0"					\
-	"osfile=/home/user/uImage-XPedite5200\0"			\
-	"fdtfile=/home/user/xpedite5200.dtb\0"				\
+	"osfile=/home/user/board.uImage\0"				\
+	"fdtfile=/home/user/board.dtb\0"				\
 	"ubootfile=/home/user/u-boot.bin\0"				\
 	"fdtaddr=c00000\0"						\
 	"osaddr=0x1000000\0"						\
diff --git a/include/configs/XPEDITE5370.h b/include/configs/xpedite537x.h
index 629dc0d..e7de13a 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/xpedite537x.h
@@ -22,7 +22,7 @@
  */
 
 /*
- * xpedite5370 board configuration file
+ * xpedite537x board configuration file
  */
 #ifndef __CONFIG_H
 #define __CONFIG_H
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8572		1
 #define CONFIG_XPEDITE5370	1
 #define CONFIG_SYS_BOARD_NAME	"XPedite5370"
+#define CONFIG_SYS_FORM_3U_VPX	1
 #define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -110,6 +111,20 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
+					 CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_DS1621_ADDR,	\
+					 CONFIG_SYS_I2C_DS4510_ADDR,	\
+					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_LM90_ADDR,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
+					 CONFIG_SYS_I2C_PEX8518_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR}
+/* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
+#define I2C_ADDR_IGNORE_LIST		{0x50}
 
 /*
  * Memory map
@@ -265,6 +280,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_DS1621_ADDR	0x48
 #define CONFIG_DTT_DS1621
 #define CONFIG_DTT_SENSORS		{ 0 }
+#define CONFIG_SYS_I2C_LM90_ADDR	0x4c
 
 /* I2C EEPROM - AT24C128B */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
@@ -334,18 +350,18 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 /* PCIE1 - VPX P1 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x40000000	/* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe8000000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
 
 /* PCIE2 - PEX8518 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xe8800000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000	/* 8M */
 
@@ -396,6 +412,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_SNTP
@@ -578,8 +595,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 	"misc_args=ip=on\0"						\
 	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 	"bootfile=/home/user/file\0"					\
-	"osfile=/home/user/uImage-XPedite5370\0"			\
-	"fdtfile=/home/user/xpedite5370.dtb\0"				\
+	"osfile=/home/user/board.uImage\0"				\
+	"fdtfile=/home/user/board.dtb\0"				\
 	"ubootfile=/home/user/u-boot.bin\0"				\
 	"fdtaddr=c00000\0"						\
 	"osaddr=0x1000000\0"						\
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
new file mode 100644
index 0000000..a849cf9
--- /dev/null
+++ b/include/configs/xpedite550x.h
@@ -0,0 +1,607 @@
+/*
+ * Copyright 2010 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * xpedite550x board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_P2020		1
+#define CONFIG_XPEDITE550X	1
+#define CONFIG_SYS_BOARD_NAME	"XPedite5500"
+#define CONFIG_SYS_FORM_PMC_XMC	1
+#define CONFIG_PRPMC_PCI_ALIAS	"pci0"	/* Processor PMC interface on pci0 */
+#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xfff80000
+#endif
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (PEX8112 or XMC) */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+#define CONFIG_FSL_ELBC		1
+
+/*
+ * Multicore config
+ */
+#define CONFIG_MP
+#define CONFIG_BPTR_VIRT_ADDR	0xee000000	/* virt boot page address */
+#define CONFIG_MPC8xxx_DISABLE_BPTR		/* Don't leave BPTR enabled */
+
+/*
+ * DDR config
+ */
+#define CONFIG_FSL_DDR3
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#define SPD_EEPROM_ADDRESS1			0x54
+#define SPD_EEPROM_OFFSET		0x200	/* OFFSET of SPD in EEPROM */
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 2
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+extern unsigned long get_board_ddr_clk(unsigned long dummy);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /* ddrclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
+					 CONFIG_SYS_POST_I2C)
+#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_LM75_ADDR,	\
+					 CONFIG_SYS_I2C_LM90_ADDR,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
+					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
+					 CONFIG_SYS_I2C_RTC_ADDR}
+
+/*
+ * Memory map
+ * 0x0000_0000 0x7fff_ffff	DDR			2G Cacheable
+ * 0x8000_0000 0xbfff_ffff	PCIe1 Mem		1G non-cacheable
+ * 0xe000_0000 0xe7ff_ffff	SRAM/SSRAM/L1 Cache	128M non-cacheable
+ * 0xe800_0000 0xe87f_ffff	PCIe1 IO		8M non-cacheable
+ * 0xee00_0000 0xee00_ffff	Boot page translation	4K non-cacheable
+ * 0xef00_0000 0xef0f_ffff	CCSR/IMMR		1M non-cacheable
+ * 0xef80_0000 0xef8f_ffff	NAND Flash		1M non-cacheable
+ * 0xf000_0000 0xf7ff_ffff	NOR Flash 2		128M non-cacheable
+ * 0xf800_0000 0xffff_ffff	NOR Flash 1		128M non-cacheable
+ */
+
+#define CONFIG_SYS_LBC_LCRR	(LCRR_CLKDIV_8 | LCRR_EADC_3)
+
+/*
+ * NAND flash configuration
+ */
+#define CONFIG_SYS_NAND_BASE		0xef800000
+#define CONFIG_SYS_NAND_BASE2		0xef840000 /* Unused at this time */
+#define CONFIG_SYS_NAND_BASE_LIST	{CONFIG_SYS_NAND_BASE, \
+					 CONFIG_SYS_NAND_BASE2}
+#define CONFIG_SYS_MAX_NAND_DEVICE	2
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_NAND_QUIET_TEST	/* 2nd NAND flash not always populated */
+#define CONFIG_NAND_FSL_ELBC
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE		0xf8000000
+#define CONFIG_SYS_FLASH_BASE2		0xf0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST	{ {0xfff40000, 0xc0000}, \
+						  {0xf7f40000, 0xc0000} }
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
+
+/*
+ * Chip select configuration
+ */
+/* NOR Flash 0 on CS0 */
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(OR_AM_128MB		| \
+				 OR_GPCM_CSNT		| \
+				 OR_GPCM_XACS		| \
+				 OR_GPCM_ACS_DIV2	| \
+				 OR_GPCM_SCY_8		| \
+				 OR_GPCM_TRLX		| \
+				 OR_GPCM_EHTR		| \
+				 OR_GPCM_EAD)
+
+/* NOR Flash 1 on CS1 */
+#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_FLASH_BASE2	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_NAND_BASE	| \
+				 (2<<BR_DECC_SHIFT)	| \
+				 BR_PS_8		| \
+				 BR_MS_FCM		| \
+				 BR_V)
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_OR2_PRELIM	(OR_AM_256KB	| \
+				 OR_FCM_PGS	| \
+				 OR_FCM_CSCT	| \
+				 OR_FCM_CST	| \
+				 OR_FCM_CHT	| \
+				 OR_FCM_SCY_1	| \
+				 OR_FCM_TRLX	| \
+				 OR_FCM_EHTR)
+
+/* NAND flash on CS3 */
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_NAND_BASE2	| \
+				 (2<<BR_DECC_SHIFT)	| \
+				 BR_PS_8		| \
+				 BR_MS_FCM		| \
+				 BR_V)
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+
+/*
+ * Use L1 as initial stack
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe0000000
+#define CONFIG_SYS_INIT_RAM_END		0x00004000
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+#define CONFIG_FDT_FIXUP_PCI_IRQ	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C				/* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C DS7505 temperature sensor */
+#define CONFIG_DTT_LM75
+#define CONFIG_DTT_SENSORS		{ 0 }
+#define CONFIG_SYS_I2C_LM75_ADDR	0x48
+
+/* I2C ADT7461 temperature sensor */
+#define CONFIG_SYS_I2C_LM90_ADDR	0x4C
+
+/* I2C EEPROM - AT24C128B */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6	/* 64 byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* take up to 10 msec */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11		1
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
+
+/* GPIO */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR0	0x18
+#define CONFIG_SYS_I2C_PCA953X_ADDR1	0x1c
+#define CONFIG_SYS_I2C_PCA953X_ADDR2	0x1e
+#define CONFIG_SYS_I2C_PCA953X_ADDR3	0x1f
+#define CONFIG_SYS_I2C_PCA953X_ADDR	CONFIG_SYS_I2C_PCA953X_ADDR0
+
+/*
+ * GPIO pin definitions, PU = pulled high, PD = pulled low
+ */
+/* PCA9557 @ 0x18*/
+#define CONFIG_SYS_PCA953X_C0_SER0_EN		0x01 /* PU; UART0 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER0_MODE		0x02 /* PU; UART0 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_SER1_EN		0x04 /* PU; UART1 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER1_MODE		0x08 /* PU; UART1 serial mode select (1: RS-485, 0: RS-232) */
+#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS	0x10 /* PU; Boot flash CS select */
+#define CONFIG_SYS_PCA953X_NVM_WP		0x20 /* PU; Write protection (0: disabled, 1: enabled) */
+
+/* PCA9557 @ 0x1e*/
+#define CONFIG_SYS_PCA953X_XMC_GA0		0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA1		0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_GA2		0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_WAKE		0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_XMC_BIST		0x20 /* Enable XMC BIST */
+#define CONFIG_SYS_PCA953X_PMC_EREADY		0x40 /* PU; PMC PCI eready */
+#define CONFIG_SYS_PCA953X_PMC_MONARCH		0x80 /* PMC monarch mode enable */
+
+/* PCA9557 @ 0x1f */
+#define CONFIG_SYS_PCA953X_MC_GPIO0		0x01 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO1		0x02 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO2		0x04 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO3		0x08 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO4		0x10 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO5		0x20 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO6		0x40 /* PU; */
+#define CONFIG_SYS_PCA953X_MC_GPIO7		0x80 /* PU; */
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1 - PEX8112 or XMC, depending on build option */
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x40000000	/* 1G */
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
+
+
+/*
+ * Networking options
+ */
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI	1
+#define CONFIG_TSEC_TBI
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
+#define CONFIG_ETHPRIME		"eTSEC2"
+
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC1"
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC2"
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHY_ADDR		2
+#define TSEC2_PHYIDX		0
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_TSEC3		1
+#define CONFIG_TSEC3_NAME	"eTSEC3"
+#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_PHY_ADDR		3
+#define TSEC3_PHYIDX		0
+#define CONFIG_HAS_ETH2
+
+/*
+ * USB
+ */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Command configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
+#define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG			/* do not reset board on panic */
+#define CONFIG_PREBOOT				/* enable preboot variable */
+#define CONFIG_FIT		1
+#define CONFIG_FIT_VERBOSE	1
+#define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN	(16 << 20)	/* Increase max gunzip size */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02		/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff     Pri U-Boot (512 KB)
+ * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff     Pri FDT (256KB)
+ * fef00000 - ffefffff     Pri OS image (16MB)
+ * f8000000 - feefffff     Pri OS Use/Filesystem (111MB)
+ *
+ * f7f80000 - f7ffffff     Sec U-Boot (512 KB)
+ * f7f40000 - f7f7ffff     Sec U-Boot Environment (256 KB)
+ * f7f00000 - f7f3ffff     Sec FDT (256KB)
+ * f6f00000 - f7efffff     Sec OS image (16MB)
+ * f0000000 - f6efffff     Sec OS Use/Filesystem (111MB)
+ */
+#define CONFIG_UBOOT1_ENV_ADDR	MK_STR(0xfff80000)
+#define CONFIG_UBOOT2_ENV_ADDR	MK_STR(0xf7f80000)
+#define CONFIG_FDT1_ENV_ADDR	MK_STR(0xfff00000)
+#define CONFIG_FDT2_ENV_ADDR	MK_STR(0xf7f00000)
+#define CONFIG_OS1_ENV_ADDR	MK_STR(0xfef00000)
+#define CONFIG_OS2_ENV_ADDR	MK_STR(0xf6f00000)
+
+#define CONFIG_PROG_UBOOT1						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_UBOOT2						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_BOOT_OS_NET						\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"if test -n $fdtaddr; then "				\
+			"$download_cmd $fdtaddr $fdtfile; "		\
+			"if test $? -eq 0; then "			\
+				"bootm $osaddr - $fdtaddr; "		\
+			"else; "					\
+				"echo FDT DOWNLOAD FAILED; "		\
+			"fi; "						\
+		"else; "						\
+			"bootm $osaddr; "				\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS1							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS1_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS2							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS2_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT1						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT2						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"autoload=yes\0"						\
+	"download_cmd=tftp\0"						\
+	"console_args=console=ttyS0,115200\0"				\
+	"root_args=root=/dev/nfs rw\0"					\
+	"misc_args=ip=on\0"						\
+	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+	"bootfile=/home/user/file\0"					\
+	"osfile=/home/user/board.uImage\0"				\
+	"fdtfile=/home/user/board.dtb\0"				\
+	"ubootfile=/home/user/u-boot.bin\0"				\
+	"fdtaddr=c00000\0"						\
+	"osaddr=0x1000000\0"						\
+	"loadaddr=0x1000000\0"						\
+	"prog_uboot1="CONFIG_PROG_UBOOT1"\0"				\
+	"prog_uboot2="CONFIG_PROG_UBOOT2"\0"				\
+	"prog_os1="CONFIG_PROG_OS1"\0"					\
+	"prog_os2="CONFIG_PROG_OS2"\0"					\
+	"prog_fdt1="CONFIG_PROG_FDT1"\0"				\
+	"prog_fdt2="CONFIG_PROG_FDT2"\0"				\
+	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"		\
+	"bootcmd_flash1=run set_bootargs; "				\
+		"bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
+	"bootcmd_flash2=run set_bootargs; "				\
+		"bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
+	"bootcmd=run bootcmd_flash1\0"
+#endif	/* __CONFIG_H */
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
deleted file mode 100644
index 9606b53..0000000
--- a/include/configs/xsengine.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_PXA250			1		/* This is an PXA250 CPU    */
-#define CONFIG_XSENGINE			1
-#define CONFIG_MMC			1
-#define CONFIG_DOS_PARTITION		1
-#define BOARD_LATE_INIT			1
-#undef  CONFIG_USE_IRQ					/* we don't need IRQ/FIQ stuff */
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
-
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_CPUSPEED			0x161           /* set core clock to 400/200/100 MHz */
-
-#define CONFIG_NR_DRAM_BANKS		1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
-#define PHYS_SDRAM_2			0xa4000000	/* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 MB */
-#define PHYS_SDRAM_3			0xa8000000	/* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE		0x00000000	/* 0 MB */
-#define PHYS_SDRAM_4			0xac000000	/* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE		0x00000000	/* 0 MB */
-#define CONFIG_SYS_DRAM_BASE			0xa0000000
-#define CONFIG_SYS_DRAM_SIZE			0x04000000
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/* FLASH organization */
-#define CONFIG_SYS_MAX_FLASH_BANKS		1		/* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT		128		/* max number of sectors on one chip    */
-#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define PHYS_FLASH_2			0x00000000	/* Flash Bank #2 */
-#define PHYS_FLASH_SECT_SIZE		0x00020000	/* 127 KB sectors */
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=xsengine-0"
-#define MTDPARTS_DEFAULT	"mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)"
-*/
-
-/* Environment settings */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_IS_IN_FLASH             1
-#define CONFIG_ENV_ADDR                    (PHYS_FLASH_1 + 0x40000)	/* Addr of Environment Sector (after monitor)*/
-#define CONFIG_ENV_SECT_SIZE               PHYS_FLASH_SECT_SIZE		/* Size of the Environment Sector */
-#define CONFIG_ENV_SIZE                    0x4000				/* 16kB Total Size of Environment Sector */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT		(75*CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT		(50*CONFIG_SYS_HZ)	/* Timeout for Flash Write */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 256*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE		128		/* size in bytes reserved for initial data */
-
-/* Hardware drivers */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE		0x04000300
-#define CONFIG_SMC_USE_32_BIT		1
-
-/* select serial console configuration */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART			1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_BAUDRATE			115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ETHADDR			FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK			255.255.255.0
-#define CONFIG_IPADDR			192.168.1.50
-#define CONFIG_SERVERIP			192.168.1.2
-#define CONFIG_BOOTARGS			"root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS1,115200"
-#define CONFIG_CMDLINE_TAG
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_HUSH_PARSER			1
-#define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
-#define CONFIG_SYS_LONGHELP								/* undef to save memory	*/
-#define CONFIG_SYS_PROMPT			"XS-Engine u-boot> "			/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE			256					/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS			16					/* max number of command args */
-#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE				/* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START		0xA0400000				/* memtest works on     */
-#define CONFIG_SYS_MEMTEST_END			0xA0800000				/* 4 ... 8 MB in DRAM   */
-#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }	/* valid baudrates */
-#define CONFIG_SYS_LOAD_ADDR			0xA0000000				/* load kernel to this address   */
-
-#ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_BASE			0xF0000000
-#endif
-
-/* Stack sizes - The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
-#ifdef  CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
-#endif
-
-/* GP set register */
-#define CONFIG_SYS_GPSR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
-#define CONFIG_SYS_GPSR1_VAL			0x00020000	/* nPWE */
-#define CONFIG_SYS_GPSR2_VAL			0x0000C000	/* CS2, CS3 */
-
-/* GP clear register */
-#define CONFIG_SYS_GPCR0_VAL			0x00000000
-#define CONFIG_SYS_GPCR1_VAL			0x00000000
-#define CONFIG_SYS_GPCR2_VAL			0x00000000
-
-/* GP direction register */
-#define CONFIG_SYS_GPDR0_VAL			0x0000A000	/* CS1, PROG(FPGA) */
-#define CONFIG_SYS_GPDR1_VAL			0x00022A80	/* nPWE, FFUART + BTUART pins */
-#define CONFIG_SYS_GPDR2_VAL			0x0000C000	/* CS2, CS3 */
-
-/* GP rising edge detect register */
-#define CONFIG_SYS_GRER0_VAL			0x00000000
-#define CONFIG_SYS_GRER1_VAL			0x00000000
-#define CONFIG_SYS_GRER2_VAL			0x00000000
-
-/* GP falling edge detect register */
-#define CONFIG_SYS_GFER0_VAL			0x00000000
-#define CONFIG_SYS_GFER1_VAL			0x00000000
-#define CONFIG_SYS_GFER2_VAL			0x00000000
-
-/* GP alternate function register */
-#define CONFIG_SYS_GAFR0_L_VAL			0x80000000	/* CS1 */
-#define CONFIG_SYS_GAFR0_U_VAL			0x00000010	/* RDY */
-#define CONFIG_SYS_GAFR1_L_VAL			0x09988050	/* FFUART + BTUART pins */
-#define CONFIG_SYS_GAFR1_U_VAL			0x00000008	/* nPWE */
-#define CONFIG_SYS_GAFR2_L_VAL			0xA0000000	/* CS2, CS3 */
-#define CONFIG_SYS_GAFR2_U_VAL			0x00000000
-
-#define CONFIG_SYS_PSSR_VAL			0x00000020	/* Power manager sleep status */
-#define CONFIG_SYS_CCCR_VAL			0x00000161	/* 100 MHz memory, 400 MHz CPU  */
-#define CONFIG_SYS_CKEN_VAL			0x000000C0	/* BTUART and FFUART enabled    */
-#define CONFIG_SYS_ICMR_VAL			0x00000000	/* No interrupts enabled        */
-
-/* Memory settings */
-#define CONFIG_SYS_MSC0_VAL			0x25F425F0
-
-/* MDCNFG: SDRAM Configuration Register */
-#define CONFIG_SYS_MDCNFG_VAL			0x000009C9
-
-/* MDREFR: SDRAM Refresh Control Register */
-#define CONFIG_SYS_MDREFR_VAL			0x00018018
-
-/* MDMRS: Mode Register Set Configuration Register */
-#define CONFIG_SYS_MDMRS_VAL			0x00220022
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index ce65d1f..48537e3 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -27,6 +27,7 @@
  */
 #define	CONFIG_PXA27X		1	/* Marvell PXA270 CPU */
 #define	CONFIG_ZIPITZ2		1	/* Zipit Z2 board */
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 #undef	BOARD_LATE_INIT
 #undef	CONFIG_SKIP_RELOCATE_UBOOT
author	Wolfgang Denk <wd@denx.de>	2010-10-25 08:06:52 +0200
committer	Wolfgang Denk <wd@denx.de>	2010-10-25 08:06:52 +0200
commit	c163f4478ca72f51b28b55f74addc8fe029d7b83 (patch)
tree	914495b79944d55ff161fd7611d46ee7ab523978 /include/configs
parent	9038e0e7029e47ec1700128351281225f711545e (diff)
parent	6d79c39958aa0245e59f33860cd1ddd589119968 (diff)
download	u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.zip u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.tar.gz u-boot-imx-c163f4478ca72f51b28b55f74addc8fe029d7b83.tar.bz2