mpc5xxx: Remove all references to MGT5100

We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>

18 files changed, 5 insertions, 141 deletions

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index 8c5a742..44befe9 100644
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -471,13 +471,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
-# define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-# define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-# define CONFIG_SYS_HID0_INIT		0
-# define CONFIG_SYS_HID0_FINAL		0
-#endif
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 5ef0b77..5d3a744 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -30,6 +30,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_ICECUBE		1	/* ... on IceCube board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -47,7 +48,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -77,10 +77,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else
-#define CONFIG_MII		1
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,7 +165,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -178,7 +173,6 @@
 #else
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
 #endif
-#endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT	1
@@ -338,13 +332,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_LITE5200B)
 #define CONFIG_SYS_CS1_START		CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index f9687d2..22de207 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -50,7 +50,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -75,7 +74,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
 
-#endif
 
 /* Partitions */
 #define CONFIG_DOS_PARTITION
@@ -111,9 +109,7 @@
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
-#if defined(CONFIG_MPC5200)
 #define CONFIG_CMD_PCI
-#endif
 
 
 /*
@@ -147,12 +143,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -301,13 +295,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #if defined(CONFIG_BOOT_ROM)
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_BOOTROM_BASE
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3438aba..6da18eb 100644
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -430,13 +430,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 2154c78..107bff1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -633,13 +633,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 1daa574..7510ab1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -41,6 +41,7 @@
  */
 
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely a MPC5200 CPU) */
 #define CONFIG_TOTAL5200	1	/* ... on Total5200 board */
 
 #define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
@@ -73,7 +74,6 @@
 #define CONFIG_SPLASH_SCREEN
 
 
-#ifdef CONFIG_MPC5200	/* MGT5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -98,12 +98,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#else	/* MGT5100 */
-
-#define CONFIG_MII		1
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -127,9 +121,7 @@
  */
 #include <config_cmd_default.h>
 
-#if defined(CONFIG_MPC5200)
-    #define CONFIG_CMD_PCI
-#endif
+#define CONFIG_CMD_PCI
 
 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_EEPROM
@@ -176,12 +168,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration
@@ -326,17 +316,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
-
-#if defined (CONFIG_MGT5100)
-#   define CONFIG_BOARD_EARLY_INIT_R	/* switch from CS_BOOT to CS0 */
-#endif
 
 #if CONFIG_TOTAL5200_REV==1
 #   define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/aev.h b/include/configs/aev.h
index 2b4826d..98958a6 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -362,13 +362,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 52df16a..f7290d6 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -59,7 +59,6 @@
 #define CONFIG_BAUDRATE		9600	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -90,8 +89,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -169,8 +166,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
-
 #define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
 #define CONFIG_SYS_NVRAM_BASE_ADDR	0xfd010000
 #define CONFIG_SYS_NVRAM_SIZE		32*1024
@@ -179,7 +174,6 @@
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -303,13 +297,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index a81527e..f9cdcbc 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -261,13 +261,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 14f7826..c5b1565 100644
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -366,13 +366,8 @@ static inline void tws_data_config_output(unsigned output)
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h
index d0cb1e1..6903b36 100644
--- a/include/configs/ipek01.h
+++ b/include/configs/ipek01.h
@@ -324,13 +324,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index b29ef9b..d25e093 100644
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -170,13 +170,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..73405ea 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
-
 #define CONFIG_MII
 #if 0 /* test-only !!! */
 #define CONFIG_NET_MULTI	1
@@ -74,10 +71,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#else	/* MPC5100 */
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -152,12 +145,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -288,13 +279,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 18e7cc2..bdc0f79 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -138,7 +138,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
@@ -154,7 +153,6 @@
  */
 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
 #endif
-#endif
 
 /*
  * I2C configuration
@@ -276,13 +274,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index 8ca55d7..80a0bc6 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -61,7 +61,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#ifdef CONFIG_MPC5200		/* MPC5100 PCI is not supported yet. */
 /*
  * PCI Mapping:
  * 0x40000000 - 0x4fffffff - PCI Memory
@@ -87,7 +86,6 @@
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
-#endif
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -121,9 +119,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 
-#ifdef CONFIG_MPC5200
 #define CONFIG_CMD_PCI
-#endif
 
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
@@ -166,12 +162,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -289,13 +283,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h
index 5a2ef3a..060026b 100644
--- a/include/configs/smmaco4.h
+++ b/include/configs/smmaco4.h
@@ -358,13 +358,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 27dda25..d377e19 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -438,13 +438,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 92bcdb3..d462ed0 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -170,12 +170,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
-#endif
 
 /*
  * I2C configuration