* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

6 files changed, 706 insertions, 59 deletions

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index bb8ce43..b1f41a1 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -43,6 +43,9 @@
  * CONFIG_PPCHAMELEON_CLK_25
  * CONFIG_PPCHAMELEON_CLK_33
  */
+#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
+#define CONFIG_PPCHAMELEON_CLK_33
+#endif
 
 #if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
 #error "* Two external frequencies (SysClk) are defined! *"
@@ -74,11 +77,11 @@
 
 
 #ifdef CONFIG_PPCHAMELEON_CLK_25
-	#define CONFIG_SYS_CLK_FREQ	25000000 /* external frequency to pll	*/
+# define CONFIG_SYS_CLK_FREQ	25000000 /* external frequency to pll	*/
 #elif (defined (CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
+# define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll	*/
 #else
-#error "* External frequency (SysClk) not defined! *"
+# error "* External frequency (SysClk) not defined! *"
 #endif
 
 #define CONFIG_BAUDRATE		115200
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 830bf81..47f24be 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -64,6 +64,7 @@
  * Video console
  */
 #if 1
+#define CONFIG_VIDEO
 #define CONFIG_VIDEO_SED13806
 #define CONFIG_VIDEO_SED13806_16BPP
 
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d944ed8..a76ec23 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -47,11 +47,9 @@
 
 #define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
 
-#if 1
+#define CONFIG_SERIAL_MULTI	1
 #define CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
-#else
-#define CONFIG_8xx_CONS_SCC2
-#endif
+#define CONFIG_8xx_CONS_SCC2	1	/* Console is on SCC2		*/
 
 #define CONFIG_BAUDRATE		115200	/* with watchdog >= 38400 needed */
 
@@ -151,17 +149,6 @@
 #define CFG_CMD_POST_DIAG 0
 #endif
 
-#ifdef CONFIG_8xx_CONS_SCC2	/* Can't use ethernet, then */
-#define CONFIG_COMMANDS	     ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_BMP	| \
-				CFG_CMD_POST_DIAG )
-#else
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
 				CFG_CMD_DHCP	| \
@@ -172,7 +159,6 @@
 				CFG_CMD_BSP	| \
 				CFG_CMD_BMP	| \
 				CFG_CMD_POST_DIAG )
-#endif
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 5cf092a..df951e2 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -16,7 +16,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -25,7 +25,6 @@
  * MA 02111-1307 USA
  */
 
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
@@ -40,14 +39,19 @@
  * (easy to change)
  */
 #define CONFIG_ARM920T		1	/* This is an ARM920T Core		*/
-#define	CONFIG_MC9328		1	/* It's a Motorola MC9328 SoC 		*/
-#define CONFIG_MX1ADS		1	/* on a Motorola MX1ADS Board  		*/
-
-#define BOARD_LATE_INIT		1
+#define CONFIG_IMX		1	/* It's a Motorola MC9328 SoC		*/
+#define CONFIG_MX1ADS		1	/* on a Motorola MX1ADS Board		*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff		*/
 
+/*
+ * Select serial console configuration
+  */
+#define CONFIG_IMX_SERIAL1		/* internal uart 1 */
+/* #define _CONFIG_UART2 */		/* internal uart 2 */
+/* #define CONFIG_SILENT_CONSOLE */	/* use this to disable output */
 
+#define BOARD_LATE_INIT		1
 #define USE_920T_MMU		1
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff 		*/
 
 #if 0
 #define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
@@ -60,6 +64,8 @@
  */
 
 #define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+
 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
@@ -67,13 +73,13 @@
  */
 #define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
 #define CS8900_BASE		0x15000300
-#define CS8900_BUS16		1 	/* the Linux driver does accesses as shorts */
+#define CS8900_BUS16		1	/* the Linux driver does accesses as shorts */
 
 /*
  * select serial console configuration
  */
 
-#define CONFIG_UART1 		1
+/* #define CONFIG_UART1			*/
 /* #define CONFIG_UART2		1	*/
 
 #define CONFIG_BAUDRATE		115200
@@ -85,24 +91,20 @@
 #define CONFIG_COMMANDS \
 			(CONFIG_CMD_DFL	 | \
 			CFG_CMD_CACHE	 | \
-			/*CFG_CMD_NAND	 |*/ \
-			/*CFG_CMD_EEPROM |*/ \
-			/*CFG_CMD_I2C	 |*/ \
-			/*CFG_CMD_USB	 |*/ \
-			CFG_CMD_REGINFO  | \
+			CFG_CMD_REGINFO	 | \
 			CFG_CMD_ELF)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS    	"root=/dev/docbp mem=48M"
+#define CONFIG_BOOTARGS		"root=/dev/msdk mem=48M"
 #define CONFIG_ETHADDR		08:00:3e:26:0a:5c
-#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		192.168.0.22
 #define CONFIG_SERVERIP		192.168.0.11
 #define CONFIG_BOOTFILE		"mx1ads"
-/*#define CONFIG_BOOTCOMMAND	"tftp; bootm" */
+#define CONFIG_BOOTCOMMAND	"tftp; bootm"
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
@@ -114,10 +116,10 @@
  * Miscellaneous configurable options
  */
 
-#define CFG_HUSH_PARSER         1
+#define CFG_HUSH_PARSER		1
 #define CFG_PROMPT_HUSH_PS2	"> "
 
-#define	CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_LONGHELP				/* undef to save memory		*/
 
 #ifdef CFG_HUSH_PARSER
 #define CFG_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
@@ -125,21 +127,20 @@
 #define CFG_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
 #endif
 
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CFG_PBSIZE 		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
 						/* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_MAXARGS		16		/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 #define CFG_MEMTEST_START	0x09000000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
-
-#define	CFG_LOAD_ADDR		0x08800000	/* default load address	*/
-
-
-#define	CFG_HZ			1000
+#undef	CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
+#define CFG_LOAD_ADDR		0x08800000	/* default load address */
+/*#define	CFG_HZ			1000 */
+#define CFG_HZ			3686400
+#define CFG_CPUSPEED		0x141
 
 /* valid baudrates */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -159,27 +160,35 @@
  * Physical Memory Map
  */
 
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of SDRAM	*/
+#define PHYS_SDRAM_1		0x08000000	/* SDRAM  on CSD0		*/
+#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB			*/
 
-#define CONFIG_NR_DRAM_BANKS	1	   	/* we have 1 bank of SDRAM 	*/
-#define PHYS_SDRAM_1		0x08000000 	/* SDRAM  on CSD0 		*/
-#define PHYS_SDRAM_1_SIZE	0x04000000 	/* 64 MB 			*/
-
-#define CFG_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash 		*/
-#define CFG_FLASH_BASE		0x0C000000 	/* SyncFlash on CSD1 		*/
-#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total 		 	*/
-
+#define CFG_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash		*/
+#define CFG_FLASH_BASE		0x0C000000	/* SyncFlash on CSD1		*/
+#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total			*/
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 
-
 #define CONFIG_SYNCFLASH	1
 #define PHYS_FLASH_SIZE		0x01000000
 #define CFG_MAX_FLASH_SECT	(16)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x00ff0000)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x00ff8000)
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x0f000	/* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x04000 /* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x100000
+
+/*-----------------------------------------------------------------------
+ * Enable passing ATAGS
+ */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
new file mode 100644
index 0000000..61a3b29
--- /dev/null
+++ b/include/configs/mx1fs2.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T	   1	 /* this is an ARM920T CPU     */
+#define CONFIG_IMX	   1	 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_MX1FS2	   1	 /* on a mx1fs2 board */
+#undef	CONFIG_USE_IRQ		 /* don't need use IRQ/FIQ    */
+
+/*
+ * Select serial console configuration
+ */
+#undef	_CONFIG_UART1 /* internal uart 1 */
+#define _CONFIG_UART2 /* internal uart 2 */
+#undef	_CONFIG_UART3 /* internal uart 3 */
+#undef	_CONFIG_UART4 /* internal uart 4 */
+#undef	CONFIG_SILENT_CONSOLE  /* use this to disable output */
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL		 \
+				& ~CFG_CMD_LOADS	 \
+				& ~CFG_CMD_CONSOLE	 \
+				& ~CFG_CMD_AUTOSCRIPT	 \
+				& ~CFG_CMD_NET		 \
+				& ~CFG_CMD_PING		 \
+				& ~CFG_CMD_DHCP		 \
+				| CFG_CMD_JFFS2		 \
+				)
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ */
+#define CONFIG_BOOTDELAY   10
+#define CONFIG_BOOTARGS	   "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND "bootm 10080000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP				      /* undef saves memory  */
+#define CFG_PROMPT		"mx1fs2> "	      /* prompt string	     */
+#define CFG_CBSIZE		256		      /* console I/O buffer  */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size   */
+#define CFG_MAXARGS		16		      /* max command args    */
+#define CFG_BARGSIZE		CFG_CBSIZE	      /* boot args buf size  */
+
+#define CFG_MEMTEST_START	0x08100000	      /* memtest test area   */
+#define CFG_MEMTEST_END		0x08F00000
+
+#undef	CFG_CLKS_IN_HZ			     /* use HZ for freq. display     */
+
+#define CFG_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x141	     /* core clock - register value  */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
+#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
+#define	 CONFIG_INITRD_TAG	     1	   /* send initrd params	*/
+#undef	CONFIG_VFD			 /* do not send framebuffer setup    */
+
+#define CFG_JFFS_CUSTOM_PART
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN	  (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE	(120<<10)      /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4<<10)	       /* IRQ stack  */
+#define CONFIG_STACKSIZE_FIQ	(4<<10)	       /* FIQ stack  */
+#endif
+
+/* SDRAM Setup Values
+ * 0x910a8300 Precharge Command CAS 3
+ * 0x910a8200 Precharge Command CAS 2
+ *
+ * 0xa10a8300 AutoRefresh Command CAS 3
+ * 0xa10a8200 Set AutoRefresh Command CAS 2
+ */
+#define PRECHARGE_CMD 0x910a8300
+#define AUTOREFRESH_CMD 0xa10a8300
+
+#define CONFIG_INIT_CRITICAL
+
+#define BUS32BIT_VERSION
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS  1			     /* we have 1 bank of SDRAM */
+#define MX1FS2_SDRAM_1	      0x08000000	     /* SDRAM bank #1		*/
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_SDRAM_1_SIZE  (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
+#else
+#define MX1FS2_SDRAM_1_SIZE  (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
+#endif
+/*
+ * Flash Controller settings
+ */
+
+#define CFG_MAX_FLASH_BANKS	1	/* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT	256	/* number of sector in FLASH bank    */
+
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_FLASH_BUS_WIDTH	4	/* we use 32 bit FLASH memory...     */
+#define MX1FS2_FLASH_INTERLEAVE 2	/* ... made of 2 chips */
+#define MX1FS2_FLASH_BANK_SIZE	0x02000000  /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE	0x00020000  /* size of erase sector */
+#define MX1FS2_JFFS2_PART0_START 0x10200000
+#define MX1FS2_JFFS2_PART0_SIZE	 0x00500000
+#define MX1FS2_JFFS2_PART1_START 0x10700000
+#define MX1FS2_JFFS2_PART1_SIZE	 0x00900000
+#else
+#define MX1FS2_FLASH_BUS_WIDTH	2	/* we use 16 bit FLASH memory...     */
+#define MX1FS2_FLASH_INTERLEAVE 1	/* ... made of 1 chip */
+#define MX1FS2_FLASH_BANK_SIZE	0x01000000  /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE	0x00010000  /* size of erase sector */
+#endif
+#define MX1FS2_FLASH_BASE	0x10000000  /* location of flash memory */
+#define MX1FS2_FLASH_UNLOCK	   1	   /* perform hw unlock first */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+   is not so clear to me. In other words we can provide more informations
+   to user, but this expects more complex flash handling we do not provide
+   now.*/
+#undef	CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)    /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)    /* timeout for Write operation */
+
+#define CFG_FLASH_BASE		MX1FS2_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK		0
+#define CFG_JFFS2_FIRST_SECTOR		5
+#define CFG_JFFS2_NUM_BANKS		1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+#define CFG_MONITOR_BASE	0x10000000
+#define CFG_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )   */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x10020000	/* absolute address for now  */
+#define CFG_ENV_SIZE		0x20000
+
+#define	 CONFIG_ENV_OVERWRITE	1		/* env is not writable now   */
+
+/* Setup CS4 and CS5 */
+#define CFG_GIUS_A_VAL		0x0003fffe
+
+/*
+ * CSxU_VAL:
+ * 63| x	x x x | x x x x | x x  x    x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ *   |DTACK_SEL|0|BCD |	  BCS	| PSZ|PME|SYNC|	 DOL	| CNC|	  WSC	    | 0| WWS  |	  EDC  |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x |  x x x x | x x	 x x | x x  x	 x| 0
+ *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x00008C00
+#define CFG_CS0L_VAL 0x22222601
+#define CFG_CS1U_VAL 0x00008C00
+#define CFG_CS1L_VAL 0x22222301
+#define CFG_CS4U_VAL 0x00008C00
+#define CFG_CS4L_VAL 0x22222301
+#define CFG_CS5U_VAL 0x00008C00
+#define CFG_CS5L_VAL 0x22222301
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+   f_ref=16,777MHz
+
+   0x002a141f: 191,9944MHz
+   0x040b2007: 144MHz
+   0x042a141f: 96MHz
+   0x0811140d: 64MHz
+   0x040e200e: 150MHz
+   0x00321431: 200MHz
+
+   0x08001800: 64MHz mit 16er Quarz
+   0x04001800: 96MHz mit 16er Quarz
+   0x04002400: 144MHz mit 16er Quarz
+
+   31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+      |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */
+
+#define CFG_MPCTL0_VAL		0x07E723AD
+#define CFG_MPCTL1_VAL		0x00000040
+#define CFG_PCDR_VAL		0x00010005
+#define CFG_GPCR_VAL		0x00000FFB
+
+#define USE_16M_OSZI /* If you have one, you want to use it
+			The internal 32kHz oszillator jitters */
+#ifdef USE_16M_OSZI
+
+#define CFG_SPCTL0_VAL		0x04001401
+#define CFG_SPCTL1_VAL		0x0C000040
+#define CFG_CSCR_VAL		0x07030003
+#define CONFIG_SYS_CLK_FREQ	16780000
+#define CONFIG_SYSPLL_CLK_FREQ	16000000
+
+#else
+
+#define CFG_SPCTL0_VAL		0x07E716D1
+#define CFG_CSCR_VAL		0x06000003
+#define CONFIG_SYS_CLK_FREQ	16780000
+#define CONFIG_SYSPLL_CLK_FREQ	16780000
+
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR		0x08400000
+
+#define CFG_FMCR_VAL		0x00000003 /* Reset Default */
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+   0x000b00b ->b<- -> 192MHz/12=16MHz
+   0x000b00b ->8<- -> 144MHz/09=16MHz
+   0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef _CONFIG_UART1
+#define CONFIG_IMX_SERIAL1
+#elif defined _CONFIG_UART2
+#define CONFIG_IMX_SERIAL2
+#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
+#define CONFIG_IMX_SERIAL_NONE
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_CLK		3686400
+#define CFG_NS16550_REG_SIZE	1
+#define CONFIG_CONS_INDEX	1
+#ifdef _CONFIG_UART3
+#define CFG_NS16550_COM1	0x15000000
+#elif defined _CONFIG_UART4
+#define CFG_NS16550_COM1	0x16000000
+#endif
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
new file mode 100644
index 0000000..6cd9126
--- /dev/null
+++ b/include/configs/scb9328.h
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * 2003/13/06 Initial MP10 Support copied from wepep250
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T		1     /* this is an ARM920T CPU	    */
+#define CONFIG_IMX		1     /* in a Motorola MC9328MXL Chip */
+#define CONFIG_SCB9328		1     /* on a scb9328tronix board */
+#undef	CONFIG_USE_IRQ		      /* don't need use IRQ/FIQ	   */
+
+#define CONFIG_IMX_SERIAL1
+/*
+ * Select serial console configuration
+ */
+
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL		\
+				& ~CFG_CMD_LOADS	\
+				& ~CFG_CMD_CONSOLE	\
+				& ~CFG_CMD_AUTOSCRIPT	\
+				| CFG_CMD_NET		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_DHCP		\
+				)
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ * NOTE: Sending parameters to kernel depends on kernel version and
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * parameters at all! Do not get confused by them so.
+ */
+#define CONFIG_BOOTDELAY   -1
+#define CONFIG_BOOTARGS	   "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
+#define CONFIG_BOOTCOMMAND "bootm 10040000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_ETHADDR		80:81:82:83:84:85
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		10.10.10.9
+#define CONFIG_SERVERIP		10.10.10.10
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP				      /* undef saves memory  */
+#define CFG_PROMPT		"scb9328> "	      /* prompt string	     */
+#define CFG_CBSIZE		256		      /* console I/O buffer  */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size   */
+#define CFG_MAXARGS		16		      /* max command args    */
+#define CFG_BARGSIZE		CFG_CBSIZE	      /* boot args buf size  */
+
+#define CFG_MEMTEST_START	0x08100000	      /* memtest test area   */
+#define CFG_MEMTEST_END		0x08F00000
+
+#undef	CFG_CLKS_IN_HZ			     /* use HZ for freq. display     */
+
+#define CFG_HZ			3686400	     /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x141	     /* core clock - register value  */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
+#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
+#undef	CONFIG_VFD			 /* do not send framebuffer setup    */
+
+
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE	(120<<10)      /* stack size		     */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4<<10)	       /* IRQ stack		     */
+#define CONFIG_STACKSIZE_FIQ	(4<<10)	       /* FIQ stack		     */
+#endif
+
+/* SDRAM Setup Values
+0x910a8300 Precharge Command CAS 3
+0x910a8200 Precharge Command CAS 2
+
+0xa10a8300 AutoRefresh Command CAS 3
+0xa10a8200 Set AutoRefresh Command CAS 2 */
+
+#define PRECHARGE_CMD 0x910a8200
+#define AUTOREFRESH_CMD 0xa10a8200
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * SDRAM Memory Map
+ */
+/* SH FIXME */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of SDRAM */
+#define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
+#define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
+
+/*
+ * Flash Controller settings
+ */
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * Configuration for FLASH memory for the Synertronixx board
+ */
+
+/* #define SCB9328_FLASH_32M */
+
+/* 32MB */
+#ifdef SCB9328_FLASH_32M
+#define CFG_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT		256	/* number of sector in FLASH bank    */
+#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
+#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
+#define SCB9328_FLASH_BANK_SIZE	 0x02000000	/* size of one flash bank	     */
+#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
+#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
+#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
+#else
+
+/* 16MB */
+#define CFG_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT		128	/* number of sector in FLASH bank    */
+#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
+#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
+#define SCB9328_FLASH_BANK_SIZE	 0x01000000	/* size of one flash bank	     */
+#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
+#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
+#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
+#endif /* SCB9328_FLASH_32M */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+   is not so clear to me. In other words we can provide more informations
+   to user, but this expects more complex flash handling we do not provide
+   now.*/
+#undef	CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)    /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)    /* timeout for Write operation */
+
+#define CFG_FLASH_BASE		SCB9328_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK		0
+#define CFG_JFFS2_FIRST_SECTOR		5
+#define CFG_JFFS2_NUM_BANKS		1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+/* Setup for PA23 which is Reset Default PA23 but has to become
+   CS5 */
+
+#define CFG_GPR_A_VAL		0x00800000
+#define CFG_GIUS_A_VAL		0x0043fffe
+
+#define CFG_MONITOR_BASE	0x10000000
+#define CFG_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )  */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x10020000	/* absolute address for now  */
+#define CFG_ENV_SIZE		0x20000
+
+#define	 CONFIG_ENV_OVERWRITE  1		/* env is not writable now   */
+
+/*
+ * CSxU_VAL:
+ * 63| x	x x x | x x x x | x x  x    x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ *   |DTACK_SEL|0|BCD |	  BCS	| PSZ|PME|SYNC|	 DOL	| CNC|	  WSC	    | 0| WWS  |	  EDC  |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x |  x x x x | x x	 x x | x x  x	 x| 0
+ *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x000F2000
+#define CFG_CS0L_VAL 0x11110d01
+#define CFG_CS1U_VAL 0x000F0a00
+#define CFG_CS1L_VAL 0x11110601
+#define CFG_CS2U_VAL 0x0
+#define CFG_CS2L_VAL 0x0
+
+#define CFG_CS3U_VAL 0x000FFFFF
+#define CFG_CS3L_VAL 0x00000303
+
+#define CFG_CS4U_VAL 0x000F0a00
+#define CFG_CS4L_VAL 0x11110301
+
+/* CNC == 3 too long
+   #define CFG_CS5U_VAL 0x0000C210 */
+
+/* #define CFG_CS5U_VAL 0x00008400
+   mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
+   kaum langsamer ist */
+/* #define CFG_CS5U_VAL 0x00009400
+   #define CFG_CS5L_VAL 0x11010D03 */
+
+#define CFG_CS5U_VAL 0x00008400
+#define CFG_CS5L_VAL 0x00000D03
+
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE		0x16000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE+4)
+/* #define CONFIG_DM9000_USE_8BIT */
+#define CONFIG_DM9000_USE_16BIT
+/* #define CONFIG_DM9000_USE_32BIT */
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+   f_ref=16,777MHz
+
+   0x002a141f: 191,9944MHz
+   0x040b2007: 144MHz
+   0x042a141f: 96MHz
+   0x0811140d: 64MHz
+   0x040e200e: 150MHz
+   0x00321431: 200MHz
+
+   0x08001800: 64MHz mit 16er Quarz
+   0x04001800: 96MHz mit 16er Quarz
+   0x04002400: 144MHz mit 16er Quarz
+
+   31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+      |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */
+
+#define CPU200
+
+#ifdef CPU200
+#define CFG_MPCTL0_VAL 0x00321431
+#else
+#define CFG_MPCTL0_VAL 0x040e200e
+#endif
+
+/* #define BUS64 */
+#define BUS72
+
+#ifdef BUS72
+#define CFG_SPCTL0_VAL 0x04002400
+#endif
+
+#ifdef BUS96
+#define CFG_SPCTL0_VAL 0x04001800
+#endif
+
+#ifdef BUS64
+#define CFG_SPCTL0_VAL 0x08001800
+#endif
+
+/* Das ist der BCLK Divider, der aus der System PLL
+   BCLK und HCLK erzeugt:
+   31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
+   0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
+   0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
+   0x2f001003 : 192MHz/5=38,4MHz
+   0x2f000003 : 64MHz/1
+   Bit 22: SPLL Restart
+   Bit 21: MPLL Restart */
+
+#ifdef BUS64
+#define CFG_CSCR_VAL 0x2f030003
+#endif
+
+#ifdef BUS72
+#define CFG_CSCR_VAL 0x2f030403
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define MHZ16QUARZINUSE
+
+#ifdef MHZ16QUARZINUSE
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+#else
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+
+/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
+#define CFG_FMCR_VAL 0x00000001
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+   0x000b00b ->b<- -> 192MHz/12=16MHz
+   0x000b00b ->8<- -> 144MHz/09=16MHz
+   0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef BUS96
+#define CFG_PCDR_VAL 0x000b00b5
+#endif
+
+#ifdef BUS64
+#define CFG_PCDR_VAL 0x000b00b3
+#endif
+
+#ifdef BUS72
+#define CFG_PCDR_VAL 0x000b00b8
+#endif
+
+#endif	/* __CONFIG_H */