Merge commit 'wd/master'

16 files changed, 636 insertions, 165 deletions

diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 876ec20..a13db7c 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -178,7 +178,7 @@
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE1
 #define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE1
 
-#define CONFIG_SYS_FLASH_BASE		0xFFE00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
@@ -218,17 +218,13 @@
  * Memory bank definitions
  */
 
-#define CONFIG_SYS_CS0_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		2*1024*1024
-#define CONFIG_SYS_CS0_WIDTH		16
-#define CONFIG_SYS_CS0_RO		0
-#define CONFIG_SYS_CS0_WS		6
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
 #define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS3_SIZE		1*1024*1024
-#define CONFIG_SYS_CS3_WIDTH		16
-#define CONFIG_SYS_CS3_RO		0
-#define CONFIG_SYS_CS3_WS		6
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS3_MASK		0x000F0001
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index b6226c6..5d5966f 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -40,7 +40,7 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
+#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
@@ -72,21 +72,50 @@
 #define CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_USB
 #undef CONFIG_CMD_BMP
-
-#define CONFIG_HOSTNAME		M52277EVB
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+
+#define CONFIG_HOSTNAME			M52277EVB
+#define CONFIG_SYS_UBOOT_END		0x3FFFF
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
+#ifdef CONFIG_SYS_STMICRO_BOOT
+/* ST Micro serial flash */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0"	\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off 0 0x3ffff;"		\
-	"era 0 3ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
 	"save\0"				\
 	""
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" " MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"era " MK_STR(CONFIG_SYS_FLASH_BASE) " "	\
+	MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" ${filesize}; save\0"			\
+	"updsbf=run loadsbf; run progsbf\0"	\
+	"loadsbf=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
+	"progsbf=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
+	""
+#endif
 
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY		3	/* autoboot after 3 seconds */
 /* LCD */
 #ifdef CONFIG_CMD_BMP
 #define CONFIG_LCD
@@ -102,7 +131,7 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
-#define CONFIG_SYS_USB_EHCI_REGS_BASE		0xFC0B0000
+#define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
 #define CONFIG_SYS_USB_EHCI_CPU_INIT
 #endif
 
@@ -122,30 +151,53 @@
 #define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_OFFSET		0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_DSPI
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SER_FLASH_BASE	0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
+#ifdef CONFIG_CMD_SPI
+#	define CONFIG_SYS_DSPI_CS2
+#	define CONFIG_SPI_FLASH
+#	define CONFIG_SPI_FLASH_STMICRO
+
+#	define CONFIG_SYS_DSPI_DCTAR0	(DSPI_DCTAR_TRSZ(7) | \
+					 DSPI_DCTAR_CPOL | \
+					 DSPI_DCTAR_CPHA | \
+					 DSPI_DCTAR_PCSSCK_1CLK | \
+					 DSPI_DCTAR_PASC(0) | \
+					 DSPI_DCTAR_PDT(0) | \
+					 DSPI_DCTAR_CSSCK(0) | \
+					 DSPI_DCTAR_ASC(0) | \
+					 DSPI_DCTAR_PBR(0) | \
+					 DSPI_DCTAR_DT(1) | \
+					 DSPI_DCTAR_BR(1))
+#endif
 
 /* Input, PCI, Flexbus, and VCO */
 #define CONFIG_EXTRA_CLOCK
 
 #define CONFIG_SYS_INPUT_CLKSRC	16000000
 
-#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_PROMPT	"-> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
-#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ		1000
 
 #define CONFIG_SYS_MBAR		0xFC000000
 
@@ -155,17 +207,18 @@
  * You should know what you are doing if you make changes here.
  */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_INIT_RAM_END		0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 16)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - 32)
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
@@ -177,11 +230,16 @@
 #define CONFIG_SYS_SDRAM_CTRL		0xE1092000
 #define CONFIG_SYS_SDRAM_EMOD		0x81810000
 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x00
 
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
+#else
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
@@ -189,24 +247,40 @@
 /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/* Configuration for environment
+/*
+ * Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OVERWRITE	1
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_ENV_IS_IN_SPI_FLASH
+#	define CONFIG_ENV_SPI_CS	2
+#else
+#	define CONFIG_ENV_IS_IN_FLASH	1
+#endif
+#define CONFIG_ENV_OVERWRITE		1
 #undef CONFIG_ENV_IS_EMBEDDED
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000)
-#define CONFIG_ENV_SECT_SIZE	0x8000
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH1_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_OFFSET	0x30000
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000)
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x8000
+#endif
 
 #define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
-
 #	define CONFIG_FLASH_CFI_DRIVER	1
 #	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
@@ -214,6 +288,7 @@
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
 #endif
 
 /*
@@ -229,7 +304,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE		16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -243,8 +318,14 @@
  * CS5 - Available
  */
 
+#ifdef CONFIG_CF_SBF
+#define CONFIG_SYS_CS0_BASE		0x04000000
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#else
 #define CONFIG_SYS_CS0_BASE		0x00000000
 #define CONFIG_SYS_CS0_MASK		0x00FF0001
 #define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#endif
 
 #endif				/* _M52277EVB_H */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index e6c87ef..8c66f87 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -215,7 +215,7 @@
 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
@@ -251,13 +251,13 @@
  * CS7 - Available
  */
 #ifdef NORFLASH_PS32BIT
-#	define CONFIG_SYS_CS0_BASE	0xFFC0
+#	define CONFIG_SYS_CS0_BASE	0xFFC00000
 #	define CONFIG_SYS_CS0_MASK	0x003f0001
-#	define CONFIG_SYS_CS0_CTRL	0x1D00
+#	define CONFIG_SYS_CS0_CTRL	0x00001D00
 #else
-#	define CONFIG_SYS_CS0_BASE	0xFFE0
+#	define CONFIG_SYS_CS0_BASE	0xFFE00000
 #	define CONFIG_SYS_CS0_MASK	0x001f0001
-#	define CONFIG_SYS_CS0_CTRL	0x1D80
+#	define CONFIG_SYS_CS0_CTRL	0x00001D80
 #endif
 
 #endif				/* _M5329EVB_H */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 8699ef9..e3830e5 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -125,7 +125,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CSAR0 << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 #if 0 /* test-only */
 #define CONFIG_PRAM		512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
@@ -170,15 +170,15 @@
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CONFIG_SYS_CSAR0		0xffe0
-#define	CONFIG_SYS_CSCR0		0x1980		/* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffe00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CONFIG_SYS_CSMR0		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CONFIG_SYS_CSAR1		0xe000
-#define	CONFIG_SYS_CSCR1		0x0d80		/* WS=0011, AA=1, PS=10         */
-#define	CONFIG_SYS_CSMR1		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 3a5c12f..378e45a 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -90,7 +90,7 @@
 
 #define CONFIG_DRIVER_DM9000
 #ifdef CONFIG_DRIVER_DM9000
-#	define CONFIG_DM9000_BASE	((CONFIG_SYS_CSAR1 << 16) | 0x300)
+#	define CONFIG_DM9000_BASE	(CONFIG_SYS_CS1_BASE | 0x300)
 #	define DM9000_IO		CONFIG_DM9000_BASE
 #	define DM9000_DATA		(CONFIG_DM9000_BASE + 4)
 #	undef CONFIG_DM9000_DEBUG
@@ -202,7 +202,7 @@
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CSAR0 << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
@@ -233,21 +233,13 @@
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
-#define CONFIG_SYS_CSAR0		0xFF80
-#define CONFIG_SYS_CSMR0		0x007F0021
-#define CONFIG_SYS_CSCR0		0x1D80
+#define CONFIG_SYS_CS0_BASE		0xFF800000
+#define CONFIG_SYS_CS0_MASK		0x007F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
-#define CONFIG_SYS_CSAR1               0xE000
-#define CONFIG_SYS_CSMR1               0x00000001
-#define CONFIG_SYS_CSCR1               0x3DD8
-
-#define CONFIG_SYS_CSAR2		0
-#define CONFIG_SYS_CSMR2		0
-#define CONFIG_SYS_CSCR2		0
-
-#define CONFIG_SYS_CSAR3		0
-#define CONFIG_SYS_CSMR3		0
-#define CONFIG_SYS_CSCR3		0
+#define CONFIG_SYS_CS1_BASE		0xE0000000
+#define CONFIG_SYS_CS1_MASK		0x00000001
+#define CONFIG_SYS_CS1_CTRL		0x00003DD8
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index c2cd62b..86de97d 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -166,7 +166,7 @@
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
@@ -182,21 +182,9 @@
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
-#define CONFIG_SYS_CSAR0		0xFFE0
-#define CONFIG_SYS_CSMR0		0x001F0021
-#define CONFIG_SYS_CSCR0		0x1D80
-
-#define CONFIG_SYS_CSAR1		0
-#define CONFIG_SYS_CSMR1		0
-#define CONFIG_SYS_CSCR1		0
-
-#define CONFIG_SYS_CSAR2		0
-#define CONFIG_SYS_CSMR2		0
-#define CONFIG_SYS_CSCR2		0
-
-#define CONFIG_SYS_CSAR3		0
-#define CONFIG_SYS_CSMR3		0
-#define CONFIG_SYS_CSCR3		0
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_MASK		0x001F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 779d373..fc73d64 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -194,12 +194,18 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER	1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1f3539e..db48d76 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -173,7 +173,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_SYS_MONITOR_BASE	0x20000
@@ -211,13 +211,13 @@
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_AR0_PRELIM		(CONFIG_SYS_FLASH_BASE >> 16)
-#define CONFIG_SYS_CR0_PRELIM		0x1980
-#define CONFIG_SYS_MR0_PRELIM		0x001F0001
+#define CONFIG_SYS_CS0_BASE		0xffe00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
-#define CONFIG_SYS_AR1_PRELIM		0x3000
-#define CONFIG_SYS_CR1_PRELIM		0x1900
-#define CONFIG_SYS_MR1_PRELIM		0x00070001
+#define CONFIG_SYS_CS1_BASE		0x30000000
+#define CONFIG_SYS_CS1_CTRL		0x00001900
+#define CONFIG_SYS_CS1_MASK		0x00070001
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index a8a2655..15590cf 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -165,7 +165,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define	CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xf0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
@@ -212,18 +212,10 @@
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_CS0_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		2*1024*1024
-#define CONFIG_SYS_CS0_WIDTH		16
-#define CONFIG_SYS_CS0_RO		0
-#define CONFIG_SYS_CS0_WS		6
-/*
-#define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS3_SIZE		1*1024*1024
-#define CONFIG_SYS_CS3_WIDTH		16
-#define CONFIG_SYS_CS3_RO		0
-#define CONFIG_SYS_CS3_WS		6
-*/
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
+
 /*-----------------------------------------------------------------------
  * Port configuration
  */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
new file mode 100644
index 0000000..df54c60
--- /dev/null
+++ b/include/configs/M53017EVB.h
@@ -0,0 +1,247 @@
+/*
+ * Configuation settings for the Freescale MCF53017EVB.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M53017EVB_H
+#define _M53017EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5301x		/* define processor family */
+#define CONFIG_M53015		/* define processor type */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT		5000
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#define CONFIG_SYS_UNIFY_CACHE
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_MII_INIT		1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_HAS_ETH1
+
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_PINMUX	0
+#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
+#	define MCFFEC_TOUT_LOOP		50000
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+#define CONFIG_SYS_RTC_CNT		(0x8000)
+#define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C			/* I2C with hw support */
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_HOSTNAME		M53017
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=40010000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off 0 3ffff;"		\
+	"era 0 3ffff;"				\
+	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"save\0"				\
+	""
+
+#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_SYS_PROMPT	"-> "
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
+#define CONFIG_SYS_LOAD_ADDR	0x40010000
+
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_CLK		80000000
+#define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
+
+#define CONFIG_SYS_MBAR		0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END		0x20000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x43711630
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1002000
+#define CONFIG_SYS_SDRAM_EMOD		0x80010000
+#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER		1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
+
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CONFIG_ENV_OFFSET		0x8000
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		0x8000
+#define CONFIG_ENV_IS_IN_FLASH		1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash
+ * CS1 - Ext SRAM
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+
+#define CONFIG_SYS_CS1_BASE		0xC0000000
+#define CONFIG_SYS_CS1_MASK		0x00070001
+#define CONFIG_SYS_CS1_CTRL		0x00001FA0
+
+#endif				/* _M53017EVB_H */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 244ecc2..c3693b8 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -158,7 +158,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Localbus non-cacheable
  * 0xe000_0000	0xe80f_ffff	Promjet/free		128M non-cacheable
  * 0xe800_0000	0xefff_ffff	FLASH			128M non-cacheable
- * 0xffa0_0000	0xffaf_ffff     NAND                    1M non-cacheable
+ * 0xffa0_0000	0xffaf_ffff	NAND			1M non-cacheable
  * 0xffdf_0000	0xffdf_7fff	PIXIS			32K non-cacheable TLB0
  * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
@@ -268,50 +268,49 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 				CONFIG_SYS_NAND_BASE + 0x80000,\
 				CONFIG_SYS_NAND_BASE + 0xC0000}
 #define CONFIG_SYS_MAX_NAND_DEVICE    4
-#define NAND_MAX_CHIPS         1
+#define NAND_MAX_CHIPS		1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND        1
-#define CONFIG_NAND_FSL_ELBC   1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_NAND_FSL_ELBC	1
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
 /* NAND flash config */
 #define CONFIG_NAND_BR_PRELIM  (CONFIG_SYS_NAND_BASE_PHYS \
-                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-                               | BR_PS_8               /* Port Size = 8 bit */ \
-                               | BR_MS_FCM             /* MSEL = FCM */ \
-                               | BR_V)                 /* valid */
-#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000            /* length 256K */ \
-                               | OR_FCM_PGS            /* Large Page*/ \
-                               | OR_FCM_CSCT \
-                               | OR_FCM_CST \
-                               | OR_FCM_CHT \
-                               | OR_FCM_SCY_1 \
-                               | OR_FCM_TRLX \
-                               | OR_FCM_EHTR)
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_NAND_OR_PRELIM  (0xFFFC0000	      /* length 256K */ \
+			       | OR_FCM_PGS	       /* Large Page*/ \
+			       | OR_FCM_CSCT \
+			       | OR_FCM_CST \
+			       | OR_FCM_CHT \
+			       | OR_FCM_SCY_1 \
+			       | OR_FCM_TRLX \
+			       | OR_FCM_EHTR)
 
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
 
 #define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
-                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-                               | BR_PS_8               /* Port Size = 8 bit */ \
-                               | BR_MS_FCM             /* MSEL = FCM */ \
-                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
 #define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
-                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-                               | BR_PS_8               /* Port Size = 8 bit */ \
-                               | BR_MS_FCM             /* MSEL = FCM */ \
-                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
 
 #define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
-                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
-                               | BR_PS_8               /* Port Size = 8 bit */ \
-                               | BR_MS_FCM             /* MSEL = FCM */ \
-                               | BR_V)                 /* valid */
-#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM     /* NAND Options */
-
+			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+			       | BR_PS_8	       /* Port Size = 8 bit */ \
+			       | BR_MS_FCM	       /* MSEL = FCM */ \
+			       | BR_V)		       /* valid */
+#define CONFIG_SYS_OR6_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
 
 
 /* Serial Port - controlled on board with jumper J8
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 18ffbfd..25f3a26 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -206,7 +206,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffc00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #if 0 /* test-only */
 #define CONFIG_PRAM             512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
@@ -257,15 +257,15 @@
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CONFIG_SYS_CSAR0               0xffc0
-#define	CONFIG_SYS_CSCR0               0x1980          /* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffc00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CONFIG_SYS_CSMR0               0x003f0021      /* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CONFIG_SYS_CSAR1               0xe000
-#define	CONFIG_SYS_CSCR1               0x0d80          /* WS=0011, AA=1, PS=10         */
-#define	CONFIG_SYS_CSMR1               0x00010001      /* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 533c7ad..ac9c94e 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -300,6 +300,13 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
 
+/* use CFI flash driver */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use the common driver */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
 #define CONFIG_ENV_SIZE		0x08000
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
new file mode 100644
index 0000000..755952f
--- /dev/null
+++ b/include/configs/afeb9260.h
@@ -0,0 +1,169 @@
+/*
+ * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
+ *
+ * Configuation settings for the AFEB9260 board.
+ * Based on configuration for AT91SAM9260-EK
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
+#define AT91_MASTER_CLOCK	89999598	/* peripheral = main / 2 */
+#define CONFIG_SYS_HZ		1000000		/* 1us resolution */
+
+#define AT91_SLOW_CLOCK		32768	/* slow clock */
+
+#define CONFIG_AT91SAM9260	1	/* It's an Atmel AT91SAM9260 SoC*/
+#define CONFIG_AFEB9260		1	/* on an AFEB9260 Board	*/
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x20000000
+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
+#define AT91_SPI_CLK			15000000
+#define DATAFLASH_TCSS			(0x1a << 16)
+#define DATAFLASH_TCHS			(0x1 << 24)
+
+/* NAND flash */
+#define NAND_MAX_CHIPS			1
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH		1
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#undef CONFIG_RMII			/* We have full MII there */
+#define CONFIG_RESET_PHY_R		1
+
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW		1
+#define LITTLEENDIAN			1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
+#define CONFIG_USB_STORAGE		1
+
+#define CONFIG_SYS_LOAD_ADDR			0x21000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x21e00000
+
+#undef CONFIG_SYS_USE_DATAFLASH_CS0
+#define CONFIG_SYS_USE_DATAFLASH_CS1		1
+#undef CONFIG_SYS_USE_NANDFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
+#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0xa0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
+				"root=/dev/mtdblock2 "			\
+				"rw rootfstype=jffs2 panic=20"
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CFG_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32 * 1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
+
diff --git a/include/configs/fx12mm.h b/include/configs/fx12mm.h
index 8481c33..5844567 100644
--- a/include/configs/fx12mm.h
+++ b/include/configs/fx12mm.h
@@ -25,11 +25,10 @@
  * MA 02111-1307 USA
  */
 
-
 /*
-   Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
-   see http://www.em.avnet.com
-*/
+ * Configuration file for the Virtex4FX12 Minimodul by Avnet/Memec,
+ * see http://www.em.avnet.com
+ */
 
 #ifndef __CONFIG_FX12_H
 #define __CONFIG_FX12_H
@@ -54,7 +53,7 @@
 
 /*Misc*/
 #define CONFIG_SYS_PROMPT	"FX12MM:/# " /* Monitor Command Prompt */
-#define CONFIG_PREBOOT      	"echo U-Boot is up and runnining;"
+#define CONFIG_PREBOOT      	"echo U-Boot is up and running;"
 
 /*Flash*/
 #define CONFIG_SYS_FLASH_SIZE          (4*1024*1024)
@@ -62,8 +61,6 @@
 #define MTDIDS_DEFAULT		"nor0=fx12mm-flash"
 #define MTDPARTS_DEFAULT	"mtdparts=fx12mm-flash:-(user)"
 
-
 #include "configs/xilinx-ppc405.h"
 
-#endif                          /* __CONFIG_H */
-
+#endif	/* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index ff52f84..fca2e55 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -329,9 +329,6 @@
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-#define OF_CPU			"PowerPC,866@0"
-#define OF_SOC			"soc@fff00000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@a80"
 
 /* enable I2C and select the hardware/software driver */