mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.

This code has compile problems and the company does not even exist any
more.  So we take the liberty to drop support for it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
CC: Wolfgang Denk <wd@denx.de>
CC: Ben Warren <biggerbadderben@gmail.com>

1 files changed, 0 insertions, 294 deletions

diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
deleted file mode 100644
index 876d882..0000000
--- a/include/configs/SL8245.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * (C) Copyright 2001 - 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* ------------------------------------------------------------------------- */
-/*
- * Configuration settings for the SL8245 board.
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X		1
-#define CONFIG_MPC8245		1
-#define CONFIG_SL8245		1
-
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_BOOTDELAY	5
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	32		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00400000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH_BASE0_PRELIM
-#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM }
-
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
-
-	/* Maximum amount of RAM.
-	 */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 0 .. 256 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_GBL_DATA_SIZE      128
-#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
-#define CONFIG_SYS_INIT_RAM_END      0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ  66666666	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
-
-	/* Bit-field values for MCCR1.
-	 */
-#define CONFIG_SYS_ROMNAL	    0
-#define CONFIG_SYS_ROMFAL	    7
-#define CONFIG_SYS_BANK0_ROW       2
-
-	/* Bit-field values for MCCR2.
-	 */
-#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
-
-	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
-	 */
-#define CONFIG_SYS_BSTOPRE	    192
-
-	/* Bit-field values for MCCR3.
-	 */
-#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
-
-	/* Bit-field values for MCCR4.
-	 */
-#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW	    3       /* FIXME was 2 */
-#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM	    1
-#define CONFIG_SYS_REGDIMM	    0
-
-#define CONFIG_SYS_ODCR		0xff	/* configures line driver impedances,	*/
-					/* see 8245 book for bit definitions	*/
-#define CONFIG_SYS_PGMAX		0x32	/* how long the 8245 retains the	*/
-					/* currently accessed page in memory	*/
-					/* see 8245 book for details		*/
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START	    0x3ff00000
-#define CONFIG_SYS_BANK1_END	    0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START	    0x3ff00000
-#define CONFIG_SYS_BANK2_END	    0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START	    0x3ff00000
-#define CONFIG_SYS_BANK3_END	    0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START	    0x3ff00000
-#define CONFIG_SYS_BANK4_END	    0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START	    0x3ff00000
-#define CONFIG_SYS_BANK5_END	    0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START	    0x3ff00000
-#define CONFIG_SYS_BANK6_END	    0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START	    0x3ff00000
-#define CONFIG_SYS_BANK7_END	    0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors per flash	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-
-	/* Warining: environment is not EMBEDDED in the U-Boot code.
-	 * It's stored in flash separately.
-	 */
-#define CONFIG_ENV_IS_IN_FLASH	    1
-#define CONFIG_ENV_ADDR		0xFFFF0000
-#define CONFIG_ENV_SIZE		0x00010000 /* Size of the Environment		*/
-#define CONFIG_ENV_SECT_SIZE	0x00010000 /* Size of the Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
-#undef  CONFIG_PCI_SCAN_SHOW
-
-
-#define CONFIG_SK98
-#define CONFIG_NET_MULTI
-
-
-#endif	/* __CONFIG_H */