Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

84 files changed, 1526 insertions, 784 deletions

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 0004750..f1c270c 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -19,13 +19,11 @@
 #include <configs/ti_am335x_common.h>
 
 #ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_FIT
 # define CONFIG_FIT
+#endif
 # define CONFIG_TIMESTAMP
 # define CONFIG_LZO
-# ifdef CONFIG_ENABLE_VBOOT
-#  define CONFIG_FIT_SIGNATURE
-#  define CONFIG_RSA
-# endif
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN		(16 << 20)
@@ -239,6 +237,7 @@
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
 /* NAND: driver related configs */
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 2aea899..73e1b0a 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -20,8 +20,10 @@
  */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
+#endif
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
diff --git a/include/configs/arcangel4-be.h b/include/configs/arcangel4-be.h
deleted file mode 100644
index 76163ab..0000000
--- a/include/configs/arcangel4-be.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _CONFIG_ARCANGEL4_H_
-#define _CONFIG_ARCANGEL4_H_
-
-/*
- *  CPU configuration
- */
-#define CONFIG_SYS_BIG_ENDIAN
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER		3
-#define CONFIG_SYS_CACHELINE_SIZE	64
-#define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
-
-/*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is in RAM already */
-
-#define CONFIG_ARCH_EARLY_INIT_R
-
-/*
- * Memory configuration
- */
-#define CONFIG_SYS_TEXT_BASE		0x81000000
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE		0x10000000	/* 256 Mb */
-
-#define CONFIG_SYS_INIT_SP_ADDR		\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN		0x200000	/* 2 MB */
-#define CONFIG_SYS_BOOTM_LEN		0x2000000	/* 32 MB */
-#define CONFIG_SYS_LOAD_ADDR		0x82000000
-
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * UART configuration
- *
- */
-#define CONFIG_ARC_SERIAL
-#define CONFIG_ARC_UART_BASE		0xC0FC1000
-#define CONFIG_BAUDRATE			115200
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_MAXARGS		16
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			0x00200		/* 512 bytes */
-#define CONFIG_ENV_OFFSET		0
-
-/*
- * Environment configuration
- */
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_BOOTARGS			"console=ttyARC0,115200n8"
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-
-/*
- * Console configuration
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT		"arcangel4# "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-						sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#endif /* _CONFIG_ARCANGEL4_H_ */
diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h
index 81934a4..5e4097f 100644
--- a/include/configs/arcangel4.h
+++ b/include/configs/arcangel4.h
@@ -10,23 +10,11 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER		3
-#define CONFIG_SYS_CACHELINE_SIZE	64
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
 /*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is in RAM already */
-
-#define CONFIG_ARCH_EARLY_INIT_R
-
-/*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE		0x81000000
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h
index e6a08df..3066fd0 100644
--- a/include/configs/aristainetos.h
+++ b/include/configs/aristainetos.h
@@ -1,4 +1,5 @@
 /*
+ * (C) Copyright 2015
  * (C) Copyright 2014
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
@@ -24,8 +25,7 @@
 #include <asm/imx-common/gpio.h>
 
 #define CONFIG_MACH_TYPE	4501
-#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
-#define CONFIG_DEFAULT_FDT_FILE	"aristainetos.dtb"
+#define CONFIG_MMCROOT		"/dev/mmcblk0p1"
 #define CONFIG_HOSTNAME		aristainetos
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
@@ -81,7 +81,6 @@
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
@@ -101,84 +100,108 @@
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"uimage=uImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr_r=0x11000000\0" \
-	"kernel_addr_r=0x12000000\0" \
-	"kernel_file=uImage\0" \
-	"boot_fdt=try\0" \
-	"ip_dyn=yes\0" \
+	"script=u-boot.scr\0" \
+	"fit_file=/boot/system.itb\0" \
+	"loadaddr=0x12000000\0" \
+	"fit_addr_r=0x14000000\0" \
+	"uboot=/boot/u-boot.imx\0" \
+	"uboot_sz=d0000\0" \
+	"rescue_sys_addr=f0000\0" \
+	"rescue_sys_length=f10000\0" \
+	"board_type=aristainetos7@1\0" \
+	"panel=lb07wv8\0" \
+	"splashpos=m,m\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
+	"mtdids=nand0=gpmi-nand,nor0=spi3.0\0" \
+	"mtdparts=mtdparts=spi3.0:832k(u-boot),64k(env),64k(env-red)," \
+		"-(rescue-system);gpmi-nand:-(ubi)\0" \
+	"addmisc=setenv bootargs ${bootargs} consoleblank=0\0" \
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
+		"default ${board_type}\0" \
+	"get_env=mw ${loadaddr} 0 0x20000;" \
+		"mmc rescan;" \
+		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+		"env import -t ${loadaddr}\0" \
+	"default_env=mw ${loadaddr} 0 0x20000;" \
+		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
+		"board_type panel;" \
+		"env default -a;" \
+		"env import -t ${loadaddr}\0" \
+	"loadbootscript=" \
+		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
 	"mmcpart=1\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+	"mmcdev=0\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
-		"${uimage}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
-		"${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs;run loadimage loadfdt fdt_setup;" \
-		"bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
-	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
-	"nfsopts=nfsvers=3 nolock rw\0" \
-	"netdev=eth0\0" \
-	"fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
-	"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
-	"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
-	"get_env=mw ${loadaddr} 0x00000000 0x20000;" \
-		"tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
-		"env import -t ${loadaddr}\0" \
-	"addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
-	"bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
-		"${optargs}\0" \
-	"net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
-		"root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}:${netdev}:off\0" \
-	"net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
-		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"uboot=/tftpboot/aristainetos/u-boot.imx\0" \
-	"load_uboot=tftp ${loadaddr} ${uboot}\0" \
-	"uboot_sz=c0000\0" \
-	"upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
-		"mw.b 10200000 0x00 ${uboot_sz};" \
-		"run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
+		"run mmcargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+		"${fit_file}\0" \
+	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+		"${uboot}\0" \
+	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
+		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
+		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
+		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
+		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 		"sf write ${loadaddr} 400 ${filesize};" \
-		"sf read 10200000 400 ${uboot_sz};" \
-		"cmp.b ${loadaddr} 10200000 bc000\0" \
-	"ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
-	"load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
-	"load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
-	"ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
-		"run net_args addmtd addmisc;run fdt_setup;" \
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"rootfsname=rootfs\0" \
-	"ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
-		"ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}:${netdev}:off\0" \
-	"ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
-		"run bootargs_defaults ubi_args addmtd addmisc;" \
-		"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
-	"ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
-	"upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
-		"ubi write ${loadaddr} rootfs ${filesize}\0" \
-	"ksz=800000\0" \
-	"rootsz=2000000\0" \
-	"usersz=8000000\0" \
-	"ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
-		"ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"
+		"sf read ${cmp_buf} 400 ${uboot_sz};" \
+		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
+	"ubiargs=setenv bootargs console=${console},${baudrate} " \
+		"ubi.mtd=0,2048 root=ubi0:rootfs rootfstype=ubifs\0 " \
+	"ubiboot=echo Booting from ubi ...; " \
+		"run ubiargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
+		"ubifsload ${fit_addr_r} /boot/system.itb; " \
+		"imi ${fit_addr_r}\0 " \
+	"rescueargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/ram rw\0 " \
+	"rescueboot=echo Booting rescue system from NOR ...; " \
+		"run rescueargs addmtd addmisc set_fit_default;" \
+		"bootm ${fit_addr_r}\0" \
+	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
+		"${rescue_sys_length}; imi ${fit_addr_r}\0 "
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
-		"run mmcboot;" \
-	"else run ubi_ubi; fi"
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run mmc_load_fit; then " \
+				"run mmcboot; " \
+			"else " \
+				"if run ubifs_load_fit; then " \
+					"run ubiboot; " \
+				"else " \
+					"if run rescue_load_fit; then " \
+						"run rescueboot; " \
+					"else " \
+						"echo RESCUE SYSTEM BOOT " \
+							"FAILURE;" \
+					"fi; " \
+				"fi; " \
+			"fi; " \
+		"fi; " \
+	"else " \
+		"if run ubifs_load_fit; then " \
+			"run ubiboot; " \
+		"else " \
+			"if run rescue_load_fit; then " \
+				"run rescueboot; " \
+			"else " \
+				"echo RESCUE SYSTEM BOOT FAILURE;" \
+			"fi; " \
+		"fi; " \
+	"fi"
 
 #define CONFIG_ARP_TIMEOUT		200UL
 
@@ -227,8 +250,8 @@
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SECT_SIZE		(0x010000)
-#define CONFIG_ENV_OFFSET		(0x0c0000)
-#define CONFIG_ENV_OFFSET_REDUND	(0x0d0000)
+#define CONFIG_ENV_OFFSET		(0x0d0000)
+#define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)
 
 #define CONFIG_OF_LIBFDT
 
@@ -289,9 +312,6 @@
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
-#define MTDIDS_DEFAULT                  "nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT                "mtdparts=gpmi-nand:-(ubi)"
-
 #define CONFIG_MTD_UBI_FASTMAP
 #define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT	1
 
@@ -321,5 +341,4 @@
 
 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000
-
 #endif                         /* __ARISTAINETOS_CONFIG_H */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index d68993b..3ad4a9b 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -51,8 +51,6 @@
 /* PMIC */
 #define CONFIG_PMIC
 #define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-
 
 #define CONFIG_PREBOOT
 
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index a6a80de..c4b2e16 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -90,7 +90,6 @@
 #define CONFIG_CMD_PING		1
 #define CONFIG_CMD_DHCP		1
 #define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB		1
 
@@ -133,14 +132,17 @@
 # define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
 #endif
 
-/* DataFlash */
 #ifndef CONFIG_AT91SAM9G20EK_2MMC
+/* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH		1
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
 #define AT91_SPI_CLK			15000000
+#else
+/* Enable MMC. The MCCK is conflicted with DataFlash */
+#define CONFIG_CMD_MMC
 #endif
 
 #ifdef CONFIG_AT91SAM9G20EK
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index b1d4baa..6d8b71d 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -203,11 +203,12 @@
 				"bootm 0x22000000"
 #else /* CONFIG_SYS_USE_MMC */
 /* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_IS_IN_MMC
-/* For FAT system, most cases it should be in the reserved sector */
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_SIZE		0x1000
-#define CONFIG_SYS_MMC_ENV_DEV	0
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_FILE		"uboot.env"
+#define FAT_ENV_DEVICE_AND_PART "0"
+#define CONFIG_ENV_SIZE		0x4000
 #endif
 
 #ifdef CONFIG_SYS_USE_MMC
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 9c81e31..540e86a 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -143,7 +143,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index 7b4f9cf..35eae76 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -164,7 +164,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN		(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN	(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR		(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 8f3fd0b..a9c064a 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -104,6 +104,10 @@
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 
+/* generic board */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
 
 /*
  * Command line configuration.
@@ -158,7 +162,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index bbe0aea..25090a6 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -159,7 +159,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/axs101.h b/include/configs/axs101.h
index c61ddd6..5fb8aca 100644
--- a/include/configs/axs101.h
+++ b/include/configs/axs101.h
@@ -10,22 +10,8 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER		3
-#define CONFIG_SYS_CACHELINE_SIZE	32
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
-/* NAND controller DMA doesn't work correctly with D$ enabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is in RAM already */
-
-#define CONFIG_ARCH_EARLY_INIT_R
-
 #define ARC_FPGA_PERIPHERAL_BASE	0xE0000000
 #define ARC_APB_PERIPHERAL_BASE		0xF0000000
 #define ARC_DWMMC_BASE			(ARC_FPGA_PERIPHERAL_BASE + 0x15000)
@@ -34,7 +20,6 @@
 /*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE		0x81000000
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h
index 39982ef..2e0e922 100644
--- a/include/configs/bct-brettl2.h
+++ b/include/configs/bct-brettl2.h
@@ -97,7 +97,7 @@
 #define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_OFFSET	0x4000
 #define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_SECT_SIZE	0x12000
 
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8eeb15c..7a1499d 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -11,6 +11,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/kconfig.h>
+
+#define CONFIG_SYS_GENERIC_BOARD
+
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
@@ -19,10 +23,10 @@
  * and Arches dual (460GT)
  */
 #ifdef CONFIG_CANYONLANDS
-#define CONFIG_460EX		1	/* Specific PPC460EX		*/
+#define CONFIG_460EX			/* Specific PPC460EX		*/
 #define CONFIG_HOSTNAME		canyonlands
 #else
-#define CONFIG_460GT		1	/* Specific PPC460GT		*/
+#define CONFIG_460GT			/* Specific PPC460GT		*/
 #ifdef CONFIG_GLACIER
 #define CONFIG_HOSTNAME		glacier
 #else
@@ -32,7 +36,7 @@
 #endif
 #endif
 
-#define CONFIG_440		1
+#define CONFIG_440
 
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE	0xFFF80000
@@ -45,10 +49,10 @@
 
 #define CONFIG_SYS_CLK_FREQ	66666667	/* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_early_init_f */
-#define CONFIG_BOARD_EARLY_INIT_R	1	/* Call board_early_init_r */
-#define CONFIG_MISC_INIT_R		1	/* Call misc_init_r */
-#define CONFIG_BOARD_TYPES		1	/* support board types */
+#define CONFIG_BOARD_EARLY_INIT_F		/* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R		/* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R			/* Call misc_init_r */
+#define CONFIG_BOARD_TYPES			/* support board types */
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -134,7 +138,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET	1	/* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	/* Use AMD (Spansion) reset cmd */
 
 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
@@ -172,9 +176,9 @@
  * I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
  * code.
  */
-#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
 #define SPD_EEPROM_ADDRESS	{0x50, 0x51}	/* SPD i2c spd addresses*/
-#define CONFIG_DDR_ECC		1	/* with ECC support		*/
+#define CONFIG_DDR_ECC			/* with ECC support		*/
 #define CONFIG_DDR_RQDC_FIXED	0x80000038 /* fixed value for RQDC	*/
 
 #else /* defined(CONFIG_ARCHES) */
@@ -262,8 +266,8 @@
 #define CONFIG_4xx_CONFIG_BLOCKSIZE		16
 
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
-#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
-#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_LM75				/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414			/* use AD7414		*/
 #define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
 #define CONFIG_SYS_DTT_MAX_TEMP	70
 #define CONFIG_SYS_DTT_LOW_TEMP	-30
@@ -275,14 +279,14 @@
 
 #if !defined(CONFIG_ARCHES)
 /* RTC configuration */
-#define CONFIG_RTC_M41T62	1
+#define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #endif
 
 /*-----------------------------------------------------------------------
  * Ethernet
  *----------------------------------------------------------------------*/
-#define CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_IBM_EMAC4_V4
 
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
@@ -322,9 +326,9 @@
 #define CONFIG_GPCS_PHY2_ADDR   0xC
 #endif	/* !defined(CONFIG_ARCHES) */
 
-#define CONFIG_PHY_RESET	1	/* reset phy upon startup	*/
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CONFIG_PHY_DYNAMIC_ANEG	1
+#define CONFIG_PHY_RESET		/* reset phy upon startup	*/
+#define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG
 
 /*-----------------------------------------------------------------------
  * USB-OHCI
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index f7277eb..4207504 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -21,14 +21,7 @@
 #define CONFIG_MACH_TYPE		4273
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-
-#define CONFIG_DM_GPIO
 #define CONFIG_CMD_GPIO
-
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #endif
 
 /* Display information on boot */
@@ -103,97 +96,98 @@
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel=uImage-cm-fx6\0" \
+	"stdin=serial,usbkbd\0" \
+	"stdout=serial,vga\0" \
+	"stderr=serial,vga\0" \
+	"panel=HDMI\0" \
 	"autoload=no\0" \
+	"kernel=uImage-cm-fx6\0" \
+	"script=boot.scr\0" \
+	"dtb=cm-fx6.dtb\0" \
+	"bootm_low=18000000\0" \
 	"loadaddr=0x10800000\0" \
 	"fdtaddr=0x11000000\0" \
 	"console=ttymxc3,115200\0" \
 	"ethprime=FEC0\0" \
-	"bootscr=boot.scr\0" \
-	"bootm_low=18000000\0" \
 	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
 	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
-	"fdtfile=cm-fx6.dtb\0" \
 	"doboot=bootm ${loadaddr}\0" \
-	"loadfdt=false\0" \
+	"doloadfdt=false\0" \
 	"setboottypez=setenv kernel zImage-cm-fx6;" \
 		"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
-		"setenv loadfdt true;\0" \
+		"setenv doloadfdt true;\0" \
 	"setboottypem=setenv kernel uImage-cm-fx6;" \
 		"setenv doboot bootm ${loadaddr};" \
-		"setenv loadfdt false;\0"\
-	"run_eboot=echo Starting EBOOT ...; "\
-		"mmc dev ${mmcdev} && " \
-		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
-	"mmcdev=2\0" \
+		"setenv doloadfdt false;\0"\
 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
-	"loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
-	"mmcbootscript=echo Running bootscript from mmc ...; "\
-		"source ${loadaddr}\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=${mmcroot} " \
-		"${video}\0" \
-	"mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
-	"mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"run doboot\0" \
-	"satadev=0\0" \
 	"sataroot=/dev/sda2 rw rootwait\0" \
-	"sataargs=setenv bootargs console=${console} " \
-		"root=${sataroot} " \
-		"${video}\0" \
-	"loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \
-	"satabootscript=echo Running bootscript from sata ...; " \
-		"source ${loadaddr}\0" \
-	"sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \
-	"sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \
-	"sataboot=echo Booting from sata ...; "\
-		"run sataargs; " \
-		"run doboot\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
 	"nandrootfstype=ubifs\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+		"${video}\0" \
+	"sataargs=setenv bootargs console=${console} root=${sataroot} " \
+		"${video}\0" \
 	"nandargs=setenv bootargs console=${console} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype} " \
 		"${video}\0" \
-	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 0 780000; " \
-		"if ${loadfdt}; then " \
+	"nandboot=if run nandloadkernel; then " \
 			"run nandloadfdt;" \
-		"fi; " \
-		"run doboot\0" \
-	"boot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"if run loadmmcbootscript; then " \
-				"run mmcbootscript;" \
-			"else " \
-				"if run mmcloadkernel; then " \
-					"if ${loadfdt}; then " \
-						"run mmcloadfdt;" \
-					"fi;" \
-					"run mmcboot;" \
-				"fi;" \
-			"fi;" \
+			"run setboottypem;" \
+			"run storagebootcmd;" \
+			"run setboottypez;" \
+			"run storagebootcmd;" \
+		"fi;\0" \
+	"run_eboot=echo Starting EBOOT ...; "\
+		"mmc dev 2 && " \
+		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+	"bootscript=echo Running bootscript from ${storagetype} ...;" \
+		   "source ${loadaddr};\0" \
+	"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+	"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+	"setupnandboot=setenv storagetype nand;\0" \
+	"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+	"storagebootcmd=echo Booting from ${storagetype} ...;" \
+			"run ${storagetype}args; run doboot;\0" \
+	"trybootk=if run loadkernel; then " \
+		"if ${doloadfdt}; then " \
+			"run loadfdt;" \
 		"fi;" \
-		"if sata init; then " \
-			"if run loadsatabootscript; then " \
-				"run satabootscript;" \
-			"else "\
-				"if run sataloadkernel; then " \
-					"if ${loadfdt}; then " \
-						"run sataloadfdt; " \
-					"fi;" \
-					"run sataboot;" \
-				"fi;" \
-			"fi;" \
+		"run storagebootcmd;" \
+		"fi;\0" \
+	"trybootsmz=if run loadscript; then " \
+			"run bootscript;" \
 		"fi;" \
-		"run nandboot\0"
+		"run setboottypem;" \
+		"run trybootk;" \
+		"run setboottypez;" \
+		"run trybootk;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	"run setboottypem; run boot"
+	"run setupmmcboot;" \
+	"mmc dev ${storagedev};" \
+	"if mmc rescan; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupusbboot;" \
+	"if usb start; then "\
+		"if run loadscript; then " \
+			"run bootscript;" \
+		"fi;" \
+	"fi;" \
+	"run setupsataboot;" \
+	"if sata init; then " \
+		"run trybootsmz;" \
+	"fi;" \
+	"run setupnandboot;" \
+	"run nandboot;"
+
+#define CONFIG_PREBOOT		"usb start"
 
 /* SPI */
 #define CONFIG_SPI
@@ -243,6 +237,9 @@
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_SYS_STDIO_DEREGISTER
 
 /* I2C */
 #define CONFIG_CMD_I2C
@@ -281,7 +278,7 @@
 /* misc */
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_STACKSIZE			(128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN			(2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN			(10 * 1024 * 1024)
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
 #define CONFIG_OF_BOARD_SETUP
 
@@ -296,4 +293,24 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
 #endif	/* __CONFIG_CM_FX6_H */
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 9767512..b2a9f35 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -310,6 +310,7 @@
 
 #define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index cb03e33..1683a15 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -11,6 +11,8 @@
  * High Level Configuration Options (easy to change)
  */
 #define CONFIG_ARMADA_XP		/* SOC Family Name */
+#define CONFIG_DB_784MP_GP		/* Board target name for DDR training */
+
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO_LATE
@@ -65,4 +67,51 @@
  */
 #include "mv-common.h"
 
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
+ * 0x4000.4030			bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
+ * 0x4007.fffc			BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x40004030
+#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					 CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	(16 << 10)
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mvebu-common/u-boot-spl.lds"
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_SYS_MVEBU_DDR
+#define CONFIG_SPD_EEPROM		0x4e
+
 #endif /* _CONFIG_DB_MV7846MP_GP_H */
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 1f3ee55..59676ae 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -17,12 +17,6 @@
 #include <linux/sizes.h>
 
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
 
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_DISPLAY_CPUINFO
@@ -42,7 +36,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 << 20))
 
 /* select serial console configuration */
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index ad63f3c..3ab8d55 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -126,12 +126,13 @@
 #define SPI_FLASH_UBOOT_POS	(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
+
+/* TODO(sjg@chromium.org): Move these two options to Kconfig */
+#define CONFIG_DM_I2C
+#define CONFIG_DM_I2C_COMPAT
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED	100000		/* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h
index 9cef0b0..b1b8e1a 100644
--- a/include/configs/exynos5-dt-common.h
+++ b/include/configs/exynos5-dt-common.h
@@ -24,9 +24,6 @@
 #define CONFIG_POWER_TPS65090
 
 /* Enable keyboard */
-#define CONFIG_CROS_EC		/* CROS_EC protocol */
-#define CONFIG_CROS_EC_KEYB	/* CROS_EC keyboard input */
-#define CONFIG_CMD_CROS_EC
 #define CONFIG_KEYBOARD
 
 #endif
diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h
index 6714313..ae0e5ff 100644
--- a/include/configs/exynos5250-common.h
+++ b/include/configs/exynos5250-common.h
@@ -28,9 +28,6 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
-/* PMIC */
-#define CONFIG_POWER_MAX77686
-
 /* Sound */
 #define CONFIG_CMD_SOUND
 #ifdef CONFIG_CMD_SOUND
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 338d3dc..75bff4c 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -162,7 +162,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
new file mode 100644
index 0000000..d745f4e
--- /dev/null
+++ b/include/configs/galileo.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_X86_SERIAL
+
+/* ns16550 UART is memory-mapped in Quark SoC */
+#undef  CONFIG_SYS_NS16550_PORT_MAPPED
+
+#define CONFIG_PCI_MEM_BUS		0x90000000
+#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE		0x20000000
+
+#define CONFIG_PCI_PREF_BUS		0xb0000000
+#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE		0x20000000
+
+#define CONFIG_PCI_IO_BUS		0x2000
+#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE		0xe000
+
+#define CONFIG_SYS_EARLY_PCI_INIT
+#define CONFIG_PCI_PNP
+
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial\0" \
+					"stdout=serial\0" \
+					"stderr=serial\0"
+
+/* SATA is not supported in Quark SoC */
+#undef CONFIG_SCSI_AHCI
+#undef CONFIG_CMD_SCSI
+
+/* Video is not supported in Quark SoC */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_CMD_MMC
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index 73534ad..54eb977 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -62,6 +62,10 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /* User serviceable stuff */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -151,7 +155,6 @@
 					 CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN		(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN	(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR		(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 4f137fc..620f950 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -39,7 +39,6 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* Init Functions */
 #define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 4f0603a..0bc42f1 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -137,7 +137,6 @@
 
 #define CONFIG_SYS_MALLOC_LEN			(256*1024)
 
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(CONFIG_SYS_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h
index ac5ca9a..2a937c6 100644
--- a/include/configs/ibf-dsp561.h
+++ b/include/configs/ibf-dsp561.h
@@ -82,7 +82,7 @@
 #define CONFIG_ENV_OFFSET		0x4000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_SECT_SIZE	0x12000	/* Total Size of Environment Sector */
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h
index f084834..2384864 100644
--- a/include/configs/ids8313.h
+++ b/include/configs/ids8313.h
@@ -575,12 +575,9 @@
 
 #define CONFIG_VERSION_VARIABLE
 
-#define CONFIG_FIT
-#define CONFIG_FIT_SIGNATURE
 #define CONFIG_IMAGE_FORMAT_LEGACY
 #define CONFIG_CMD_FDT
 #define CONFIG_CMD_HASH
-#define CONFIG_RSA
 #define CONFIG_SHA1
 #define CONFIG_SHA256
 
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 1b9c277..21c5dce 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -61,11 +61,19 @@
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #endif
 
+#if defined(CONFIG_MX6SX)
+#define CONFIG_SPL_BSS_START_ADDR      0x88200000
+#define CONFIG_SPL_BSS_MAX_SIZE        0x100000        /* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x88300000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x3200000       /* 50 MB */
+#define CONFIG_SYS_TEXT_BASE           0x87800000
+#else
 #define CONFIG_SPL_BSS_START_ADDR	0x18200000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START	0x18300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x3200000	/* 50 MB */
 #define CONFIG_SYS_TEXT_BASE		0x17800000
 #endif
+#endif
 
 #endif
diff --git a/include/configs/ip04.h b/include/configs/ip04.h
index ec510bd..2ee215f 100644
--- a/include/configs/ip04.h
+++ b/include/configs/ip04.h
@@ -61,7 +61,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	0xffc2ffc2
 #define CONFIG_EBIU_AMBCTL1_VAL	0xffc2ffc2
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index f780f8b..2ed0855 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -195,7 +195,7 @@
 				}
 
 #ifndef __ASSEMBLY__
-#include <asm/arch-kirkwood/gpio.h>
+#include <asm/arch/gpio.h>
 extern void __set_direction(unsigned pin, int high);
 void set_sda(int state);
 void set_scl(int state);
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 14fd290..12f9d42 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -34,6 +34,8 @@
 
 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
 
+#define CONFIG_MISC_INIT_R
+
 /* include common defines/options for all Keymile boards */
 #include "km/keymile-common.h"
 #include "km/km-powerpc.h"
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index a14bfe3..c354c29 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -56,6 +56,7 @@
  * Commands configuration
  */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_ENV
@@ -78,6 +79,9 @@
  */
 #include "mv-common.h"
 
+/* loading initramfs images without uimage header */
+#define CONFIG_SUPPORT_RAW_INITRD
+
 /* ST M25P40 */
 #undef CONFIG_SPI_FLASH_MACRONIX
 #define CONFIG_SPI_FLASH_STMICRO
@@ -125,27 +129,31 @@
 	"hdpart=0:1\0"							\
 	"kernel_addr=0x00800000\0"					\
 	"ramdisk_addr=0x01000000\0"					\
-	"fdt_addr=0x01ff0000\0"						\
+	"fdt_addr=0x00ff0000\0"						\
 	"bootcmd_legacy=ide reset "					\
-		"&& load ide ${hdpart} 0x00100000 /uImage.buffalo "	\
-		"&& load ide ${hdpart} 0x00800000 /initrd.buffalo "	\
-		"&& bootm 0x00100000 0x00800000\0"			\
-	"bootcmd_net=bootp ${kernel_addr} uImage "			\
-		"&& tftpboot ${ramdisk_addr} uInitrd "			\
+		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
+		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
+		"&& tftpboot ${ramdisk_addr} initrd.img "		\
+		"&& setenv ramdisk_len ${filesize} "			\
 		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_hdd=ide reset "					\
-		"&& load ide ${hdpart} ${kernel_addr} /uImage "		\
-		"&& load ide ${hdpart} ${ramdisk_addr} /uInitrd "	\
-		"&& load ide ${hdpart} ${fdt_addr} "			\
-			"/" CONFIG_FDTFILE " "				\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
+		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
+		"&& setenv ramdisk_len ${filesize} "			\
+		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_usb=usb start "					\
-		"&& load usb 0:1 ${kernel_addr} /uImage "		\
-		"&& load usb 0:1 ${ramdisk_addr} /uInitrd "		\
-		"&& load usb 0:1 ${fdt_addr} "				\
-			"/" CONFIG_FDTFILE " "				\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
+		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
+		"&& setenv ramdisk_len ${filesize} "			\
+		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
 	"eraseenv=sf probe 0 "						\
 		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
diff --git a/include/configs/malta.h b/include/configs/malta.h
index 684d249..354672e 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -71,6 +71,7 @@
 					 sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS		16
 
+#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 
@@ -107,6 +108,16 @@
 	(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 
 /*
+ * IDE/ATA
+ */
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	2
+#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_ISA_IO_BASE_ADDRESS
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01f0
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+
+/*
  * Commands
  */
 #include <config_cmd_default.h>
@@ -118,6 +129,8 @@
 
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IDE
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 72217bd..5999d60 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -43,6 +43,8 @@
 #define CONFIG_SF_DEFAULT_SPEED		1000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 #define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_BAR
 
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -65,4 +67,51 @@
  */
 #include "mv-common.h"
 
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
+ * 0x4000.4030			bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
+ * 0x4007.fffc			BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x40004030
+#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
+					 CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	(16 << 10)
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mvebu-common/u-boot-spl.lds"
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_SYS_MVEBU_DDR
+#define CONFIG_DDR_FIXED_SIZE		(1 << 20)	/* 1GiB */
+
 #endif /* _CONFIG_DB_MV7846MP_GP_H */
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index bb07060..166ab4f 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -106,62 +106,22 @@
 # define CONFIG_XILINX_TB_WATCHDOG
 #endif
 
-/*
- * memory layout - Example
- * CONFIG_SYS_TEXT_BASE = 0x1200_0000;	defined in config.mk
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;	64MB
- *
- * CONFIG_SYS_MONITOR_LEN = 0x40000
- * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000
- *
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000
- *
- * 0x1000_0000	CONFIG_SYS_SDRAM_BASE
- *					MEMTEST_AREA	 64kB
- *					FREE
- * 0x1200_0000	CONFIG_SYS_TEXT_BASE
- *		U-BOOT code
- * 0x1202_0000
- *					FREE
- *
- *					STACK
- * 0x13EF_F000	CONFIG_SYS_MALLOC_BASE
- *					MALLOC_AREA	768kB	Alloc
- * 0x13FB_F000	CONFIG_SYS_MONITOR_BASE
- *					MONITOR_CODE	256kB	Env
- * 0x13FF_F000	CONFIG_SYS_GBL_DATA_OFFSET
- *					GLOBAL_DATA	4kB	bd, gd
- * 0x1400_0000	CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
- */
-
+#ifndef CONFIG_OF_CONTROL
 /* ddr sdram - main memory */
-#define	CONFIG_SYS_SDRAM_BASE		XILINX_RAM_START
-#define	CONFIG_SYS_SDRAM_SIZE		XILINX_RAM_SIZE
-#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-/* start of global data */
-#define	CONFIG_SYS_GBL_DATA_OFFSET \
-		(CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/* monitor code */
-#define	SIZE				0x40000
-#define	CONFIG_SYS_MONITOR_LEN		SIZE
-#define	CONFIG_SYS_MONITOR_BASE	\
-		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
-			- CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
-#define	CONFIG_SYS_MONITOR_END \
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_SYS_MALLOC_LEN		(SIZE * 3)
-#define	CONFIG_SYS_MALLOC_BASE \
-			(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-
-/* stack */
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_MALLOC_BASE
+# define CONFIG_SYS_SDRAM_BASE	XILINX_RAM_START
+# define CONFIG_SYS_SDRAM_SIZE	XILINX_RAM_SIZE
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN	0xC0000
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN	1024
+#else
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN	0x150
+#endif
+
+/* Stack location before relocation */
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE
 
 /*
  * CFI flash memory layout - Example
@@ -452,7 +412,10 @@
 #define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"
 
 #define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_NOR_SUPPORT
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SPL_NOR_SUPPORT
+# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
+#endif
 
 /* for booting directly linux */
 #define CONFIG_SPL_OS_BOOT
@@ -468,36 +431,20 @@
 /* BRAM start */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
 /* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
-/* Stack pointer prior relocation, must situated at on-chip RAM */
-#define CONFIG_SYS_SPL_MALLOC_END	(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100
+#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
 
-/*
- * The main reason to do it in this way is that MALLOC_START
- * can't be defined - common/spl/spl.c
- */
-#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
-# define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_SPL_MALLOC_END - \
-					 CONFIG_SYS_SPL_MALLOC_SIZE)
-# define CONFIG_SPL_STACK_ADDR		CONFIG_SYS_SPL_MALLOC_START
-#else
-# define CONFIG_SPL_STACK_ADDR		CONFIG_SYS_SPL_MALLOC_END
-#endif
+# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 CONFIG_SYS_MALLOC_F_LEN)
 
 /* Just for sure that there is a space for stack */
 #define CONFIG_SPL_STACK_SIZE		0x100
 
-#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 GENERATED_GBL_DATA_SIZE - \
-					 CONFIG_SYS_SPL_MALLOC_SIZE - \
+					 CONFIG_SYS_MALLOC_F_LEN - \
 					 CONFIG_SPL_STACK_SIZE)
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index fc7ecfa..2fd3add 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -157,7 +157,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN			(1024*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
new file mode 100644
index 0000000..823e051
--- /dev/null
+++ b/include/configs/minnowmax.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(1 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_NR_DRAM_BANKS		1
+
+#define CONFIG_X86_SERIAL
+#define CONFIG_SMSC_LPC47M
+
+#define CONFIG_PCI_MEM_BUS		0xd0000000
+#define CONFIG_PCI_MEM_PHYS		CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE		0x10000000
+
+#define CONFIG_PCI_PREF_BUS		0xc0000000
+#define CONFIG_PCI_PREF_PHYS		CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE		0x10000000
+
+#define CONFIG_PCI_IO_BUS		0x2000
+#define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE		0xe000
+
+#define CONFIG_SYS_EARLY_PCI_INIT
+#define CONFIG_PCI_PNP
+#define CONFIG_RTL8169
+#define CONFIG_STD_DEVICES_SETTINGS     "stdin=usbkbd,vga,serial\0" \
+					"stdout=vga,serial\0" \
+					"stderr=vga,serial\0"
+
+#define CONFIG_SCSI_DEV_LIST            \
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}
+#define CONFIG_SPI_FLASH_SST
+
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		1
+
+#define CONFIG_X86_OPTION_ROM_FILE		vga.bin
+#define CONFIG_X86_OPTION_ROM_ADDR		0xfff90000
+
+#ifndef CONFIG_SYS_COREBOOT
+#define CONFIG_VIDEO_VESA
+#endif
+#define VIDEO_IO_OFFSET				0
+#define CONFIG_X86EMU_RAW_IO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Avoid a warning in the Realtek Ethernet driver */
+#define CONFIG_SYS_CACHELINE_SIZE 16
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f0f721e..4aa8101 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -25,9 +25,6 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
-#define CONFIG_DM
-#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_SYS_GENERIC_BOARD
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index e6c4130..c567d9d 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -198,7 +198,7 @@
 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #else
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_ENV_IS_IN_MMC
 #endif
 
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fbaae3f..a290129 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -18,6 +18,12 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
+#ifdef CONFIG_SPL
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#include "imx6_spl.h"
+#endif
+
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -28,7 +34,6 @@
 #define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -222,9 +227,6 @@
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(2, 1)
 #endif
 
-#define CONFIG_DM
-#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_IMX6_THERMAL
 
 #define CONFIG_CMD_FUSE
@@ -255,7 +257,7 @@
 #define FSL_QSPI_FLASH_NUM		2
 #endif
 
-#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
 #define CONFIG_ENV_SIZE			SZ_8K
 #define CONFIG_ENV_IS_IN_MMC
 
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 982b689..46fc91e 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -28,6 +28,7 @@
 #define CONFIG_OMAP3_RX51		/* working with RX51 */
 #define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
 #define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_NOKIA_RX51
 
diff --git a/include/configs/novena.h b/include/configs/novena.h
index ea75d2c..074110c 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -116,7 +116,6 @@
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 
 #define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* SPL */
 #define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 807e96b..8b47537 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -177,12 +177,9 @@
 
 /* I2C */
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
-#define CONFIG_MAX_I2C_NUM		8
-#define CONFIG_SYS_I2C_INIT_BOARD
 
 /* POWER */
 #define CONFIG_POWER
diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index b2b3750..6295ec5 100644
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -29,11 +29,21 @@
 
 #define CONFIG_REVISION_TAG		1
 
-/* define to enable boot progress via leds */
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
-    (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define CONFIG_SHOW_BOOT_PROGRESS
+/* Status LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
+#define RED_LED_GPIO 27
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
+#define RED_LED_GPIO 16
 #endif
+#define RED_LED_DEV				0
+#define STATUS_LED_BIT			RED_LED_GPIO
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT			RED_LED_DEV
 
 /* GPIO banks */
 #define CONFIG_OMAP3_GPIO_3		/* GPIO64 .. 95 is in GPIO bank 3 */
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 255c933..c061e93 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -108,6 +108,16 @@
 #endif
 
 
+/* SPL */
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
+#define CONFIG_SPL_SPI_LOAD
+#endif
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -159,7 +169,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
index a1c980d..f04f061 100644
--- a/include/configs/peach-pi.h
+++ b/include/configs/peach-pi.h
@@ -43,8 +43,6 @@
 #endif
 
 #define CONFIG_POWER_TPS65090_EC
-#define CONFIG_CROS_EC_SPI		/* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
 
 #define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 6516a72..b5efbdc 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -43,8 +43,6 @@
 #endif
 
 #define CONFIG_POWER_TPS65090_EC
-#define CONFIG_CROS_EC_SPI		/* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
 
 #define CONFIG_USB_XHCI
 #define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/platinum.h b/include/configs/platinum.h
new file mode 100644
index 0000000..134bb45
--- /dev/null
+++ b/include/configs/platinum.h
@@ -0,0 +1,319 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_CONFIG_H__
+#define __PLATINUM_CONFIG_H__
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
+
+#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
+#include "mx6_common.h"
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+/*
+ * Console configuration
+ */
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FUSE
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#undef  CONFIG_CMD_IMLS
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_USB
+
+/*
+ * Hardware configuration
+ */
+
+/* GPIO config */
+#define CONFIG_MXC_GPIO
+
+/* UART config */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE			UART1_BASE
+#define CONFIG_BAUDRATE				115200
+#define CONFIG_CONS_INDEX			1
+
+/* I2C config */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED			100000
+
+/* MMC config */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR		0
+#define CONFIG_SYS_FSL_USDHC_NUM		1
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet config */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE				ENET_BASE_ADDR
+
+#define CONFIG_PHYLIB
+
+/* USB config */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_MXC_USB_PORT			1
+#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS			0
+
+/* Memory config */
+#define CONFIG_NR_DRAM_BANKS			1
+#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
+#ifndef PHYS_SDRAM_SIZE
+#define PHYS_SDRAM_SIZE				(1024 << 20)
+#endif
+
+#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
+						 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
+						 CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#ifdef CONFIG_CMD_NAND
+
+/* NAND config */
+#define CONFIG_NAND_MXS
+#ifndef CONFIG_SYS_NAND_MAX_CHIPS
+#define CONFIG_SYS_NAND_MAX_CHIPS		2
+#endif
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* DMA config, needed for GPMI/MXS NAND support */
+#define CONFIG_APBH_DMA
+#define CONFIG_APBH_DMA_BURST
+#define CONFIG_APBH_DMA_BURST8
+
+/* Fuse support */
+#define CONFIG_MXC_OCOTP
+
+/* Environment in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		(16 << 20)
+#define CONFIG_ENV_SECT_SIZE		(128 << 10)
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+
+#else /* CONFIG_CMD_NAND */
+
+/* Environment in MMC */
+#define CONFIG_ENV_SIZE			(8 << 10)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#endif /* CONFIG_CMD_NAND */
+
+/*
+ * U-Boot configuration
+ */
+
+/* Console boot messages */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Tag config */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Board startup config */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MISC_INIT_R
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Device tree support */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_LOADADDR				0x12000000
+#define CONFIG_SYS_TEXT_BASE			0x17800000
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
+						 PHYS_SDRAM_SIZE - (12 << 20))
+
+#define CONFIG_BOOTDELAY			3
+#define CONFIG_BOOTCOMMAND			"run bootubi_scr"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_PREBOOT
+
+#define CONFIG_SYS_CBSIZE			256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
+						 sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS			16
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR			CONFIG_LOADADDR
+
+/* MTD/UBI/UBIFS config */
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+				"512k(env1),512k(env2),-(ubi)"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
+				"512k(env1),512k(env2),495M(ubi0)," \
+				"14M(res0),2M(res1)," \
+				"512k(res2),512k(res3),-(ubi1)"
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/*
+ * Environment configuration
+ */
+
+#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
+#define CONFIG_COMMON_ENV_UBI						\
+	"setubipartition=env set ubipartition ubi\0"			\
+	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
+#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
+#define CONFIG_COMMON_ENV_UBI						\
+	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
+	"setubirfs=env set ubirfs ubi0:rootfs\0"
+#endif
+
+#define CONFIG_COMMON_ENV_MISC						\
+	"user=user\0"							\
+	"project="CONFIG_PLATINUM_PROJECT"\0"				\
+	"uimage=uImage\0"						\
+	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
+	"serverip=serverip\0"						\
+	"memaddrlinux=0x10800000\0"					\
+	"memaddrsrc=0x11000000\0"					\
+	"memaddrdtb=0x12000000\0"					\
+	"console=ttymxc0\0"						\
+	"baudrate=115200\0"						\
+	"boot_scr=boot.uboot\0"						\
+	"boot_vol=0\0"							\
+	"mtdids="MTDIDS_DEFAULT"\0"					\
+	"mtdparts="MTDPARTS_DEFAULT"\0"					\
+	"mmcfs=ext2\0"							\
+	"mmcrootpart=1\0"						\
+	\
+	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
+	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
+	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
+	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
+	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
+	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
+	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
+	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
+	\
+	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
+	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
+	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
+	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
+	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
+		"$mmcfilelinux\0"					\
+	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
+		"$mmcfiledtb\0"						\
+	\
+	"ubipart=ubi part $ubipartition\0"				\
+	"ubimount=ubifsmount $ubirfs\0"					\
+	\
+	"setbootargscommon=env set bootargs $bootargs "			\
+		"console=$console,$baudrate enable_wait_mode=off\0"	\
+	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
+	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
+	"setbootargsubirfs=env set bootargs $bootargs "			\
+		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
+	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
+		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
+	"setbootargsmmcrfs=env set bootargs $bootargs "			\
+		"root=$mmcrootdev rootwait rw\0"			\
+	\
+	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
+		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
+			"setbootargsnfsrfs;"				\
+			"run loadtftpkernel loadtftpdtb;"		\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
+			"run setubipartition setubirfs;"		\
+			"run setbootargscommon setbootargsmtd "		\
+				"setbootargsubirfs;"			\
+			"run loadtftpkernel loadtftpdtb;"		\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootubi=run setubipartition setubirfs setubifilelinux "	\
+				"setubipfiledtb;"			\
+			"run setbootargscommon setbootargsmtd "		\
+				"setbootargsubirfs;"			\
+			"run ubipart ubimount loadubikernel loadubidtb;" \
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	"bootubi_scr=run setubipartition setubirfs;"			\
+			"run ubipart ubimount;"				\
+			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
+			"then source ${memaddrsrc}; else run bootubi; fi\0" \
+	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
+			"setbootargscommon setbootargsmmcrfs;"		\
+			"run loadmmckernel loadmmcdtb;"			\
+			"bootm $memaddrlinux - $memaddrdtb\0"		\
+	\
+	"bootcmd="CONFIG_BOOTCOMMAND"\0"
+
+#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
+							CONFIG_COMMON_ENV_UBI
+#endif /* __PLATINUM_CONFIG_H__ */
diff --git a/include/configs/platinum_picon.h b/include/configs/platinum_picon.h
new file mode 100644
index 0000000..4590df5
--- /dev/null
+++ b/include/configs/platinum_picon.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_PICON_CONFIG_H__
+#define __PLATINUM_PICON_CONFIG_H__
+
+#define CONFIG_PLATINUM_PICON
+#define CONFIG_PLATINUM_BOARD			"Barco Picon"
+#define CONFIG_PLATINUM_PROJECT			"picon"
+#define CONFIG_PLATINUM_CPU			"imx6dl"
+
+#define CONFIG_MX6
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE			RMII
+#define CONFIG_FEC_MXC_PHYADDR			0
+
+#define CONFIG_HOSTNAME				picon
+
+#define CONFIG_SYS_PROMPT			"picon > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS		"\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_COMMON_ENV_SETTINGS \
+						CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_PICON_CONFIG_H__ */
diff --git a/include/configs/platinum_titanium.h b/include/configs/platinum_titanium.h
new file mode 100644
index 0000000..6789655
--- /dev/null
+++ b/include/configs/platinum_titanium.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014, Barco (www.barco.com)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLATINUM_TITANIUM_CONFIG_H__
+#define __PLATINUM_TITANIUM_CONFIG_H__
+
+#define CONFIG_PLATINUM_TITANIUM
+#define CONFIG_PLATINUM_BOARD			"Barco Titanium"
+#define CONFIG_PLATINUM_PROJECT			"titanium"
+#define CONFIG_PLATINUM_CPU			"imx6q"
+
+#define CONFIG_MX6
+
+#define PHYS_SDRAM_SIZE				(512 << 20)
+#define CONFIG_SYS_NAND_MAX_CHIPS		1
+
+#include <configs/platinum.h>
+
+#define CONFIG_FEC_XCV_TYPE			RGMII
+#define CONFIG_FEC_MXC_PHYADDR			4
+
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_PHY_RESET_DELAY			1000
+
+#define CONFIG_HOSTNAME				titanium
+
+#define CONFIG_SYS_PROMPT			"titanium > "
+
+#define CONFIG_PLATFORM_ENV_SETTINGS		"\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_COMMON_ENV_SETTINGS \
+						CONFIG_PLATFORM_ENV_SETTINGS
+
+#endif /* __PLATINUM_TITANIUM_CONFIG_H__ */
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
new file mode 100644
index 0000000..3121ac9
--- /dev/null
+++ b/include/configs/rpi-common.h
@@ -0,0 +1,186 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef _RPI_COMMON_H_
+#define _RPI_COMMON_H_
+
+#include <linux/sizes.h>
+
+/* Architecture, CPU, etc.*/
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BCM2835
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_DCACHE_OFF
+/*
+ * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
+ * so 2708 has historically been used rather than a dedicated 2835 ID.
+ *
+ * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
+ * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
+ * rather than obtaining a valid ID:-/
+ */
+#ifndef CONFIG_BCM2836
+#define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
+#endif
+
+/* Memory layout */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_TEXT_BASE		0x00008000
+#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
+/*
+ * The board really has 256M. However, the VC (VideoCore co-processor) shares
+ * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
+ * smaller amount of RAM is present in order to avoid stomping on the area
+ * the VC uses.
+ */
+#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_SDRAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_MALLOC_LEN		SZ_4M
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x00200000
+#define CONFIG_LOADADDR			0x00200000
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Devices */
+/* GPIO */
+#define CONFIG_BCM2835_GPIO
+/* LCD */
+#define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
+#define LCD_BPP				LCD_COLOR16
+/*
+ * Prevent allocation of RAM for FB; the real FB address is queried
+ * dynamically from the VideoCore co-processor, and comes from RAM
+ * not owned by the ARM CPU.
+ */
+#define CONFIG_FB_ADDR			0
+#define CONFIG_VIDEO_BCM2835
+#define CONFIG_SYS_WHITE_ON_BLACK
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#ifdef CONFIG_BCM2836
+#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000
+#else
+#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
+#endif
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MISC_INIT_R
+#endif
+
+/* Console UART */
+#define CONFIG_PL01X_SERIAL
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200
+
+/* Console configuration */
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
+					 sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Environment */
+#define CONFIG_ENV_SIZE			SZ_16K
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE		"mmc"
+#define FAT_ENV_DEVICE_AND_PART		"0:1"
+#define FAT_ENV_FILE			"uboot.env"
+#define CONFIG_FAT_WRITE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_SYS_LOAD_ADDR		0x1000000
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Shell */
+#define CONFIG_SYS_MAXARGS		8
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_COMMAND_HISTORY
+
+/* Commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* Device tree support */
+#define CONFIG_OF_BOARD_SETUP
+/* ATAGs support for bootm/bootz */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+#include <config_distro_defaults.h>
+
+/* Some things don't make sense on this HW or yet */
+#undef CONFIG_CMD_FPGA
+
+/* Environment */
+#define ENV_DEVICE_SETTINGS \
+	"stdin=serial,lcd\0" \
+	"stdout=serial,lcd\0" \
+	"stderr=serial,lcd\0"
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it low in memory to avoid conflicts.
+ *
+ * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
+ *   something else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"scriptaddr=0x00000000\0" \
+	"pxefile_addr_r=0x00100000\0" \
+	"kernel_addr_r=0x01000000\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_DEVICE_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTENV
+
+#define CONFIG_BOOTDELAY 2
+
+#endif
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index c94f411..ab2f4db 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -1,193 +1,12 @@
 /*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012,2015 Stephen Warren
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:	GPL-2.0
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <linux/sizes.h>
-
-/* Architecture, CPU, etc.*/
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_BCM2835
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_DCACHE_OFF
-/*
- * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
- * so 2708 has historically been used rather than a dedicated 2835 ID.
- */
-#define CONFIG_MACH_TYPE		MACH_TYPE_BCM2708
-
-/* Enable driver model */
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
-/* Memory layout */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_TEXT_BASE		0x00008000
-#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
-/*
- * The board really has 256M. However, the VC (VideoCore co-processor) shares
- * the RAM, and uses a configurable portion at the top. We tell U-Boot that a
- * smaller amount of RAM is present in order to avoid stomping on the area
- * the VC uses.
- */
-#define CONFIG_SYS_SDRAM_SIZE		SZ_128M
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + \
-					 CONFIG_SYS_SDRAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN		SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
-#define CONFIG_SYS_MEMTEST_START	0x00100000
-#define CONFIG_SYS_MEMTEST_END		0x00200000
-#define CONFIG_LOADADDR			0x00200000
-
-/* Flash */
-#define CONFIG_SYS_NO_FLASH
-
-/* Devices */
-/* GPIO */
-#define CONFIG_BCM2835_GPIO
-/* LCD */
-#define CONFIG_LCD
-#define CONFIG_LCD_DT_SIMPLEFB
-#define LCD_BPP				LCD_COLOR16
-/*
- * Prevent allocation of RAM for FB; the real FB address is queried
- * dynamically from the VideoCore co-processor, and comes from RAM
- * not owned by the ARM CPU.
- */
-#define CONFIG_FB_ADDR			0
-#define CONFIG_VIDEO_BCM2835
-#define CONFIG_SYS_WHITE_ON_BLACK
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_MMC_SDHCI_IO_ACCESSORS
-#define CONFIG_BCM2835_SDHCI
-
-#define CONFIG_CMD_USB
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
-#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_MISC_INIT_R
-#endif
-
-/* Console UART */
-#define CONFIG_PL01X_SERIAL
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200
-
-/* Console configuration */
-#define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +		\
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Environment */
-#define CONFIG_ENV_SIZE			SZ_16K
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE		"mmc"
-#define FAT_ENV_DEVICE_AND_PART		"0:1"
-#define FAT_ENV_FILE			"uboot.env"
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_LOAD_ADDR		0x1000000
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/* Shell */
-#define CONFIG_SYS_MAXARGS		8
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_COMMAND_HISTORY
-
-/* Commands */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MMC
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
-/* Device tree support */
-#define CONFIG_OF_BOARD_SETUP
-/* ATAGs support for bootm/bootz */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-#include <config_distro_defaults.h>
-
-/* Some things don't make sense on this HW or yet */
-#undef CONFIG_CMD_FPGA
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
-	"stdin=serial,lcd\0" \
-	"stdout=serial,lcd\0" \
-	"stderr=serial,lcd\0"
-
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * scriptaddr can be pretty much anywhere that doesn't conflict with something
- *   else. Put it low in memory to avoid conflicts.
- *
- * pxefile_addr_r can be pretty much anywhere that doesn't conflict with
- *   something else. Put it low in memory to avoid conflicts.
- *
- * kernel_addr_r must be within the first 128M of RAM in order for the
- *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
- *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
- *   should not overlap that area, or the kernel will have to copy itself
- *   somewhere else before decompression. Similarly, the address of any other
- *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
- *   this up to 16M allows for a sizable kernel to be decompressed below the
- *   compressed load address.
- *
- * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
- *   the compressed kernel to be up to 16M too.
- *
- * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
- *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
- */
-#define ENV_MEM_LAYOUT_SETTINGS \
-	"scriptaddr=0x00000000\0" \
-	"pxefile_addr_r=0x00100000\0" \
-	"kernel_addr_r=0x01000000\0" \
-	"fdt_addr_r=0x02000000\0" \
-	"ramdisk_addr_r=0x02100000\0" \
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(USB, usb, 0) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	ENV_DEVICE_SETTINGS \
-	ENV_MEM_LAYOUT_SETTINGS \
-	BOOTENV
-
-#define CONFIG_BOOTDELAY 2
+#include "rpi-common.h"
 
 #endif
diff --git a/include/configs/rpi_2.h b/include/configs/rpi_2.h
new file mode 100644
index 0000000..2e7e74f
--- /dev/null
+++ b/include/configs/rpi_2.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2012,2015 Stephen Warren
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BCM2836
+
+#include "rpi-common.h"
+
+#endif
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index dfa2e07..8fadc68 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -40,7 +40,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 /* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 << 20))
 
 /*
@@ -290,9 +289,5 @@
 #define CONFIG_OF_LIBFDT
 
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 9458047..5dab61d 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -169,13 +169,14 @@
 				"bootz 0x22000000 - 0x21000000"
 #elif CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_FILE		"uboot.env"
+#define FAT_ENV_DEVICE_AND_PART	"0"
+#define CONFIG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \
 				"fatload mmc 0:1 0x22000000 zImage; " \
 				"bootz 0x22000000 - 0x21000000"
-#define CONFIG_SYS_MMC_ENV_DEV	0
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -226,7 +227,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index f2849d7..bd288be 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -191,6 +191,7 @@
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
 #define CONFIG_CMD_FAT
+#define CONFIG_FAT_WRITE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000 /* load address */
@@ -215,13 +216,14 @@
 				"bootm 0x22000000 - 0x21000000"
 #elif CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_SIZE		0x1000
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE	"mmc"
+#define FAT_ENV_FILE		"uboot.env"
+#define FAT_ENV_DEVICE_AND_PART	"0"
+#define CONFIG_ENV_SIZE		0x4000
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 dtb; " \
 				"fatload mmc 0:1 0x22000000 uImage; " \
 				"bootm 0x22000000 - 0x21000000"
-#define CONFIG_SYS_MMC_ENV_DEV	0
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -272,7 +274,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
 
 #ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 996973d..6493d56 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -20,7 +20,9 @@
 
 #define CONFIG_ARCH_CPU_INIT
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -66,8 +68,12 @@
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
@@ -221,4 +227,54 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
+
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x200000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_PMECC_CAP		8
+#define CONFIG_PMECC_SECTOR_SIZE	512
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		224
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+
+#endif
 #endif
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 09ab4d7..9e1b86a 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -20,7 +20,9 @@
 
 #define CONFIG_ARCH_CPU_INIT
 
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DISPLAY_CPUINFO
 
@@ -66,8 +68,12 @@
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR		0x210000
+#else
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+#endif
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
 
@@ -219,4 +225,54 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
+
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x200000
+#define CONFIG_SPL_MAX_SIZE		0x10000
+#define CONFIG_SPL_BSS_START_ADDR	0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT		arch/arm/cpu/at91-common/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_PMECC_CAP		8
+#define CONFIG_PMECC_SECTOR_SIZE	512
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	0x1000
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_OOBSIZE		224
+#define CONFIG_SYS_NAND_BLOCK_SIZE	0x40000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+
+#endif
 #endif
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 657f751..febbfb6 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -23,16 +23,6 @@
 
 #define CONFIG_BOOTSTAGE
 #define CONFIG_BOOTSTAGE_REPORT
-#define CONFIG_DM
-#define CONFIG_CMD_DEMO
-#define CONFIG_CMD_DM
-#define CONFIG_DM_DEMO
-#define CONFIG_DM_DEMO_SIMPLE
-#define CONFIG_DM_DEMO_SHAPE
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_TEST
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_CROS_EC
 
 #define CONFIG_SYS_STDIO_DEREGISTER
 
@@ -41,9 +31,6 @@
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_LMB
-#define CONFIG_FIT
-#define CONFIG_FIT_SIGNATURE
-#define CONFIG_RSA
 #define CONFIG_CMD_FDT
 #define CONFIG_ANDROID_BOOT_IMAGE
 
@@ -73,7 +60,6 @@
 /*
  * Size of malloc() pool, before and after relocation
  */
-#define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #define CONFIG_MALLOC_F_ADDR		0x0010000
 #define CONFIG_SYS_MALLOC_LEN		(32 << 20)	/* 32MB  */
 
@@ -100,8 +86,6 @@
 #define CONFIG_CMD_SF_TEST
 #define CONFIG_CMD_SPI
 #define CONFIG_SPI_FLASH
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SPI_FLASH_EON
 #define CONFIG_SPI_FLASH_GIGADEVICE
@@ -112,7 +96,6 @@
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_WINBOND
 
-#define CONFIG_DM_I2C
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_SANDBOX
 #define CONFIG_I2C_EDID
@@ -158,9 +141,6 @@
 
 #define CONFIG_BOOTARGS ""
 
-#define CONFIG_CROS_EC
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_CROS_EC_SANDBOX
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_BOARD_LATE_INIT
 
@@ -183,7 +163,6 @@
 #define LCD_BPP			LCD_COLOR16
 #define CONFIG_LCD_BMP_RLE8
 
-#define CONFIG_CROS_EC_KEYB
 #define CONFIG_KEYBOARD
 
 #define CONFIG_EXTRA_ENV_SETTINGS	"stdin=serial,cros-ec-keyb\0" \
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 21c8bda..84029cb 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -33,6 +33,11 @@
 #define CONFIG_LZO
 
 /*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
@@ -51,6 +56,7 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -141,6 +147,5 @@
 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
 
 #endif /* _CONFIG_SHEEVAPLUG_H */
diff --git a/include/configs/silk.h b/include/configs/silk.h
new file mode 100644
index 0000000..a4235e9
--- /dev/null
+++ b/include/configs/silk.h
@@ -0,0 +1,117 @@
+/*
+ * include/configs/silk.h
+ *     This file is silk board configuration.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __SILK_H
+#define __SILK_H
+
+#undef DEBUG
+#define CONFIG_R8A7794
+#define CONFIG_RMOBILE_BOARD_STRING "Silk"
+
+#include "rcar-gen2-common.h"
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_TEXT_BASE	0x70000000
+#else
+#define CONFIG_SYS_TEXT_BASE	0xE6304000
+#endif
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_INIT_SP_ADDR		0x7003FFFC
+#else
+#define CONFIG_SYS_INIT_SP_ADDR		0xE633FFFC
+#endif
+#define STACK_AREA_SIZE			0xC000
+#define LOW_LEVEL_MERAM_STACK \
+		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define RCAR_GEN2_SDRAM_BASE		0x40000000
+#define RCAR_GEN2_SDRAM_SIZE		(1024u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SCIF_USE_EXT_CLK
+
+/* FLASH */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_QUAD
+#define CONFIG_SYS_NO_FLASH
+
+/* SH Ether */
+#define	CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT	0
+#define CONFIG_SH_ETHER_PHY_ADDR	0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE	64
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+#define RMOBILE_XTAL_CLK	20000000u
+#define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 156 / 2)
+#define CONFIG_P_CLK_FREQ	(CONFIG_PLL1_CLK_FREQ / 24)
+#define CONFIG_SH_SCIF_CLK_FREQ	14745600 /* External Clock */
+
+#define CONFIG_SYS_TMU_CLK_DIV  4
+
+/* i2c */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	3
+#define CONFIG_SYS_I2C_SH_SPEED0	400000
+#define CONFIG_SYS_I2C_SH_SPEED1	400000
+#define CONFIG_SYS_I2C_SH_SPEED2	400000
+#define CONFIG_SH_I2C_DATA_HIGH		4
+#define CONFIG_SH_I2C_DATA_LOW		5
+#define CONFIG_SH_I2C_CLOCK		10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR	0x58 /* da9063 */
+
+/* USB */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_RMOBILE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+
+/* MMCIF */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SH_MMCIF
+#define CONFIG_SH_MMCIF_ADDR	0xee200000
+#define CONFIG_SH_MMCIF_CLK	48000000
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA	0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA	0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA	0x00000180
+/* SCIF2 */
+#define CONFIG_SMSTP7_ENA	0x00080000
+
+#endif /* __SILK_H */
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 8395372..3b06d30 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -18,6 +18,8 @@
 
 #include <configs/exynos5250-common.h>
 
+/* PMIC */
+#define CONFIG_POWER_MAX77686
 
 #define CONFIG_BOARD_COMMON
 #define CONFIG_ARCH_EARLY_INIT_R
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 982d0dc..080fc3a 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -48,9 +48,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
 
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
-
 /*
  * select serial console configuration
  */
@@ -224,9 +221,5 @@
 #define CONFIG_OF_LIBFDT
 
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 9fa644f..6c68596 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -21,11 +21,6 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 /* CPU */
 #define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/snow.h b/include/configs/snow.h
index 7eaa586..fe802f2 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -20,7 +20,6 @@
 #include <configs/exynos5-dt-common.h>
 
 
-#define CONFIG_CROS_EC_I2C		/* Support CROS_EC over I2C */
 #define CONFIG_POWER_TPS65090_I2C
 
 #define CONFIG_BOARD_COMMON
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 6b1f967..ee227fe 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void);
  * QSPI support
  */
 #ifdef CONFIG_OF_CONTROL	/* QSPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
 #define CONFIG_CADENCE_QSPI
 /* Enable multiple SPI NOR flash manufacturers */
 #define CONFIG_SPI_FLASH		/* SPI flash subsystem */
@@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #endif
 
 #ifdef CONFIG_OF_CONTROL	/* DW SPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
 #define CONFIG_DESIGNWARE_SPI
 #define CONFIG_CMD_SPI
 #endif
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index fd9bd63..156e0fa 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -28,21 +28,10 @@
 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN			0x2000
 
-#define CONFIG_DM
 /* serial port (PL011) configuration */
 #define CONFIG_BAUDRATE				115200
-#ifdef CONFIG_DM
-#define CONFIG_DM_SERIAL
 #define CONFIG_PL01X_SERIAL
-#else
-#define CONFIG_SYS_SERIAL0                     0x80406000
-#define CONFIG_CONS_INDEX			0
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL01x_PORTS                     {(void *)CONFIG_SYS_SERIAL0}
-#define CONFIG_PL011_CLOCK                     (2700 * 1000)
-#endif
 
 /* user interface */
 #define CONFIG_SYS_PROMPT			"STV0991> "
diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h
index 87d269b..1537e53 100644
--- a/include/configs/sun4i.h
+++ b/include/configs/sun4i.h
@@ -13,8 +13,6 @@
  */
 #define CONFIG_CLK_FULL_SPEED		1008000000
 
-#define CONFIG_MACH_TYPE		4104
-
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SUNXI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
@@ -25,4 +23,6 @@
  */
 #include <configs/sunxi-common.h>
 
+#define CONFIG_MACH_TYPE	(4104 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h
index 52e3a6f..e755531 100644
--- a/include/configs/sun5i.h
+++ b/include/configs/sun5i.h
@@ -13,8 +13,6 @@
  */
 #define CONFIG_CLK_FULL_SPEED		1008000000
 
-#define CONFIG_MACH_TYPE		4138
-
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SUNXI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
@@ -25,4 +23,6 @@
  */
 #include <configs/sunxi-common.h>
 
+#define CONFIG_MACH_TYPE	(4138 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index 7cd7890..f817f73 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -14,8 +14,6 @@
  */
 #define CONFIG_CLK_FULL_SPEED		912000000
 
-#define CONFIG_MACH_TYPE		4283
-
 #ifdef CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_SUNXI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
@@ -31,4 +29,6 @@
  */
 #include <configs/sunxi-common.h>
 
+#define CONFIG_MACH_TYPE	(4283 | ((CONFIG_MACH_TYPE_COMPAT_REV) << 28))
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 4a5cab2..bd7d049 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -13,26 +13,36 @@
 #ifndef _SUNXI_COMMON_CONFIG_H
 #define _SUNXI_COMMON_CONFIG_H
 
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+/*
+ * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the
+ * expense of restricting some features, so the regular machine id values can
+ * be used.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV	0
+#else
+/*
+ * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels.
+ * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass
+ * beyond the machine id check.
+ */
+# define CONFIG_MACH_TYPE_COMPAT_REV	1
+#endif
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_SUNXI		/* sunxi family */
 #ifdef CONFIG_SPL_BUILD
-#ifndef CONFIG_SPL_FEL
 #define CONFIG_SYS_THUMB_BUILD	/* Thumbs mode to save space in SPL */
 #endif
-#endif
 
 #include <asm/arch/cpu.h>	/* get chip and board defs */
 
 #define CONFIG_SYS_TEXT_BASE		0x4a000000
 
 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
 # define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 /*
@@ -146,10 +156,10 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 
+#define CONFIG_SPL_BOARD_LOAD_IMAGE
+
 #ifdef CONFIG_SPL_FEL
 
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"
 #define CONFIG_SPL_TEXT_BASE		0x2000
 #define CONFIG_SPL_MAX_SIZE		0x4000		/* 16 KiB */
 
@@ -181,11 +191,30 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000	/* 512 KiB */
 
 /* I2C */
+#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER
 #define CONFIG_SPL_I2C_SUPPORT
+#endif
+
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_SYS_I2C_SPEED		400000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
+
+#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
+#define CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C_SOFT_SPEED	50000
+#define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
+#define CONFIG_VIDEO_LCD_I2C_BUS	0 /* The lcd panel soft i2c is bus 0 */
+#define CONFIG_SYS_SPD_BUS_NUM		1 /* And the axp209 i2c bus is bus 1 */
+/* We use pin names in Kconfig and sunxi_name_to_gpio() */
+#define CONFIG_SOFT_I2C_GPIO_SDA	soft_i2c_gpio_sda
+#define CONFIG_SOFT_I2C_GPIO_SCL	soft_i2c_gpio_scl
+#ifndef __ASSEMBLY__
+extern int soft_i2c_gpio_sda;
+extern int soft_i2c_gpio_scl;
+#endif
+#endif
+
 #define CONFIG_CMD_I2C
 
 /* PMU */
@@ -197,6 +226,20 @@
 #define CONFIG_CONS_INDEX              1       /* UART0 */
 #endif
 
+#if CONFIG_CONS_INDEX == 1
+#ifdef CONFIG_MACH_SUN9I
+#define OF_STDOUT_PATH		"/soc/serial@07000000:115200"
+#else
+#define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28000:115200"
+#endif
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
+#define OF_STDOUT_PATH		"/soc@01c00000/serial@01c28400:115200"
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I)
+#define OF_STDOUT_PATH		"/soc@01c00000/serial@01f02800:115200"
+#else
+#error Unsupported console port nr. Please fix stdout-path in sunxi-common.h.
+#endif
+
 /* GPIO */
 #define CONFIG_SUNXI_GPIO
 #define CONFIG_SPL_GPIO_SUPPORT
@@ -204,10 +247,10 @@
 
 #ifdef CONFIG_VIDEO
 /*
- * The amount of RAM that is reserved for the FB. This will not show up as
- * RAM to the kernel, but will be reclaimed by a KMS driver in future.
+ * The amount of RAM to keep free at the top of RAM when relocating u-boot,
+ * to use as framebuffer. This must be a multiple of 4096.
  */
-#define CONFIG_SUNXI_FB_SIZE (9 << 20)
+#define CONFIG_SUNXI_MAX_FB_SIZE (9 << 20)
 
 /* Do we want to initialize a simple FB? */
 #define CONFIG_VIDEO_DT_SIMPLEFB
@@ -225,8 +268,6 @@
 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 
-#define CONFIG_SYS_MEM_TOP_HIDE ((CONFIG_SUNXI_FB_SIZE + 0xFFF) & ~0xFFF)
-
 /* To be able to hook simplefb into dt */
 #ifdef CONFIG_VIDEO_DT_SIMPLEFB
 #define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 65468ad..2cf4558 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -21,9 +21,6 @@
  */
 #include <asm/hardware.h>
 
-#define MACH_TYPE_TAURUS		2067
-#define MACH_TYPE_AXM			2068
-
 #define CONFIG_SYS_GENERIC_BOARD
 
 #if defined(CONFIG_SPL_BUILD)
@@ -121,6 +118,12 @@
 #define CONFIG_RMII
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
+#define CONFIG_AT91SAM9_WATCHDOG
+#if !defined(CONFIG_SPL_BUILD)
+/* Enable the watchdog */
+#define CONFIG_HW_WATCHDOG
+#endif
+
 /* USB */
 #if defined(CONFIG_BOARD_TAURUS)
 #define CONFIG_USB_ATMEL
diff --git a/include/configs/tb100.h b/include/configs/tb100.h
index e9218f7..46df406 100644
--- a/include/configs/tb100.h
+++ b/include/configs/tb100.h
@@ -12,21 +12,11 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_ARC700
-#define CONFIG_ARC_MMU_VER		3
-#define CONFIG_SYS_CACHELINE_SIZE	32
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
 /*
- * Board configuration
- */
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARCH_EARLY_INIT_R
-
-/*
  * Memory configuration
  */
-#define CONFIG_SYS_TEXT_BASE		0x84000000
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 8f1e370..005fc6a 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -18,16 +18,6 @@
 
 #include <asm/arch/tegra.h>		/* get chip and board defs */
 
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_SERIAL
-#endif
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
-#define CONFIG_DM_I2C
-
 #define CONFIG_SYS_TIMER_RATE		1000000
 #define CONFIG_SYS_TIMER_COUNTER	NV_PA_TMRUS_BASE
 
@@ -47,7 +37,6 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* 4MB  */
-#define CONFIG_SYS_MALLOC_F_LEN		(1 << 10)
 
 #define CONFIG_SYS_NONCACHED_MEMORY	(1 << 20)       /* 1 MiB */
 
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 5ed86d9..20a55f4 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -20,12 +20,7 @@
 #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #ifndef CONFIG_SPL_BUILD
-# define CONFIG_DM
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 #include <asm/arch/omap.h>
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 3c634ee..840e108 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -19,12 +19,7 @@
 #include <asm/arch/omap3.h>
 
 #ifndef CONFIG_SPL_BUILD
-# define CONFIG_DM
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
 # define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
 #endif
 
 /* The chip has SDRC controller */
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 5a53c50..3f738fb 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2012-2015 Panasonic Corporation
  *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -43,6 +43,9 @@
 #define CONFIG_SDRAM1_SIZE	0x10000000
 #endif
 
+#define CONFIG_I2C_EEPROM
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 /*
  * Support card address map
  */
@@ -77,8 +80,6 @@
 #define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_MALLOC_F_LEN  0x2000
-
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/
@@ -92,6 +93,8 @@
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MISC_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_BOARD_LATE_INIT
 
@@ -187,8 +190,6 @@
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMD_DM
-
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
@@ -232,11 +233,16 @@
 	"image_offset=0x00080000\0"		\
 	"image_size=0x00f00000\0"		\
 	"verify=n\0"				\
-	"norboot=run add_default_bootargs;"				\
+	"nandupdate=nand erase 0 0x100000 &&"				\
+		   "tftpboot u-boot-spl.bin &&"				\
+		   "nand write $loadaddr 0 0x10000 &&"			\
+		   "tftpboot u-boot-dtb.img &&"				\
+		   "nand write $loadaddr 0x10000 0xf0000\0"		\
+	"norboot=run add_default_bootargs &&"				\
 		"bootm $image_offset\0"					\
-	"nandboot=run add_default_bootargs;"				\
-		"nand read $loadaddr $image_offset $image_size;"	\
-		"bootm\0"						\
+	"nandboot=run add_default_bootargs &&"				\
+		 "nand read $loadaddr $image_offset $image_size &&"	\
+		 "bootm\0"						\
 	"add_default_bootargs=setenv bootargs $bootargs"		\
 		" console=ttyS0,$baudrate\0"				\
 
@@ -266,8 +272,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x00100000
 #endif
 
-#define CONFIG_BOARD_POSTCLK_INIT
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 027d78b..7fb28a5 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -11,9 +11,9 @@
 /* We use generic board for v8 Versatile Express */
 #define CONFIG_SYS_GENERIC_BOARD
 
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #ifndef CONFIG_SEMIHOSTING
-#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING
+#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
 #endif
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ARMV8_SWITCH_TO_EL1
@@ -21,8 +21,9 @@
 
 #define CONFIG_REMAKE_ELF
 
-#ifndef CONFIG_BASE_FVP
-/* Base FVP not using GICv3 yet */
+#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \
+    !defined(CONFIG_TARGET_VEXPRESS64_JUNO)
+/* Base FVP and Juno not using GICv3 yet */
 #define CONFIG_GICV3
 #endif
 
@@ -40,10 +41,13 @@
 #define CONFIG_BOOTP_VCI_STRING		"U-boot.armv8.vexpress_aemv8a"
 
 /* Link Definitions */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_TEXT_BASE		0x88000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_TEXT_BASE		0xe0000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #else
 #define CONFIG_SYS_TEXT_BASE		0x80000000
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -54,7 +58,7 @@
 
 
 /* SMP Spin Table Definitions */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #else
 #define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
@@ -88,10 +92,15 @@
 #define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
 #define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
 
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define V2M_UART0			0x7ff80000
+#define V2M_UART1			0x7ff70000
+#else /* Not Juno */
 #define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
 #define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
 #define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
 #define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+#endif
 
 #define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
 
@@ -119,9 +128,12 @@
 #define GICR_BASE			(0x2f100000)
 #else
 
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define GICD_BASE			(0x2f000000)
 #define GICC_BASE			(0x2c000000)
+#elif CONFIG_TARGET_VEXPRESS64_JUNO
+#define GICD_BASE			(0x2C010000)
+#define GICC_BASE			(0x2C02f000)
 #else
 #define GICD_BASE			(0x2C001000)
 #define GICC_BASE			(0x2C002000)
@@ -140,7 +152,11 @@
 
 /* PL011 Serial Configuration */
 #define CONFIG_PL011_SERIAL
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_PL011_CLOCK		7273800
+#else
 #define CONFIG_PL011_CLOCK		24000000
+#endif
 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
 					 (void *)CONFIG_SYS_SERIAL1}
 #define CONFIG_CONS_INDEX		0
@@ -161,6 +177,7 @@
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_IMI
+#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
@@ -191,7 +208,7 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Initial environment variables */
-#ifdef CONFIG_BASE_FVP
+#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 				"kernel_name=uImage\0"	\
 				"kernel_addr_r=0x80000000\0"	\
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
index 7e78f8a..2dea921 100644
--- a/include/configs/vexpress_common.h
+++ b/include/configs/vexpress_common.h
@@ -122,7 +122,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_SYS_L2CACHE_OFF		1
 #define CONFIG_INITRD_TAG		1
-
+#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_OF_LIBFDT		1
 
 /* Size of malloc() pool */
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 809017c..117d1f7 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -175,7 +175,7 @@
 		"if i2c probe 0x10; then " \
 			"setenv bootargs ${bootargs} " \
 				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
-					"if=RGB666; " \
+					"if=RGB666,bpp=32; " \
 			"if test 0 -eq ${nextcon}; then " \
 				"setenv fbmem fbmem=10M; " \
 			"else " \
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index ecedfc3..994874c 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -22,11 +22,6 @@
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 #define CONFIG_DISPLAY_CPUINFO
 
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
 #define CONFIG_LMB
 #define CONFIG_OF_LIBFDT
 
@@ -39,7 +34,6 @@
 /* SATA AHCI storage */
 
 #define CONFIG_SCSI_AHCI
-#define CONFIG_SATA_INTEL
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_LIBATA
 #define CONFIG_SYS_64BIT_LBA
@@ -193,7 +187,6 @@
 #define CONFIG_SYS_STACK_SIZE			(32 * 1024)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN			0x200000
-#define CONFIG_SYS_MALLOC_F_LEN			(2 << 10)
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -245,6 +238,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+#define CONFIG_BOOTSTAGE
+#define CONFIG_CMD_BOOTSTAGE
+
 #define CONFIG_CMD_USB
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 2d28e89..864528a 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -276,17 +276,11 @@
 #define CONFIG_OF_LIBFDT
 
 /* FIT support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* FDT support */
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
-/* RSA support */
-#define CONFIG_FIT_SIGNATURE
-#define CONFIG_RSA
-
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)