Merge branch 'master' of git://git.denx.de/u-boot-arm

31 files changed, 663 insertions, 51 deletions

diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index 040bfe4..8d1fd47 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -58,14 +58,16 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE	NV_PA_NAND_BASE
 
 /* Environment in NAND (which is 512M), aligned to start of last sector */
 #define CONFIG_ENV_IS_IN_NAND
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index bd000a7..c10e78b 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -19,8 +19,10 @@
 
 /* High Level Configuration Options */
 
+#define CONFIG_MX25
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -41,6 +43,7 @@
 #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	IMX_RAM_BASE
@@ -64,9 +67,10 @@
 /* No NOR flash present */
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_NOWHERE
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* U-Boot general configuration */
 #define CONFIG_SYS_PROMPT	"MX25PDK U-Boot > "
@@ -83,7 +87,12 @@
 
 /* U-Boot commands */
 #include <config_cmd_default.h>
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC
@@ -92,7 +101,37 @@
 #define CONFIG_CMD_NET
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_BOOTDELAY	3
+/* ESDHC driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+/* PMIC Configs */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
+
+#define CONFIG_DOS_PARTITION
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_BASE		IMX_I2C_BASE
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* Ethernet Configs */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_BOOTDELAY	1
 
 #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 3d4a601..cdf3e15 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -238,7 +238,7 @@
  */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 #define CONFIG_BOOTFILE	"uImage"
 #define CONFIG_LOADADDR	0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 3b86c9e..138a941 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -106,7 +106,7 @@
 
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"bootargs_base=setenv bootargs console=ttymxc0,115200\0"	\
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 342d53f..88b2bd6 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -68,6 +68,7 @@
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
 #define CONFIG_RTC_MC13XXX
 
@@ -94,6 +95,7 @@
 
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
@@ -110,13 +112,15 @@
 #define CONFIG_NET_RETRY_COUNT	100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
 #define CONFIG_CMD_MMC
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
 
@@ -242,6 +246,18 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* EHCI driver */
+#define CONFIG_USB_EHCI
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_MXC
+#define CONFIG_MXC_USB_PORT	0
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERFACE_DIFF_UNI | \
+				 MXC_EHCI_POWER_PINS_ENABLED | \
+				 MXC_EHCI_OC_PIN_ACTIVE_LOW)
+#define CONFIG_MXC_USB_PORTSC	(MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
+
 /* mmc driver */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h
index 3c1c056..a74a0a7 100644
--- a/include/configs/mx51_efikamx.h
+++ b/include/configs/mx51_efikamx.h
@@ -261,5 +261,6 @@
 
 #define CONFIG_SYS_DDR_CLKSEL		0
 #define CONFIG_SYS_CLKTL_CBCDR		0x59E35145
+#define CONFIG_SYS_MAIN_PWR_ON
 
 #endif
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index f00cec2..fa0db38 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -144,12 +144,12 @@
  ***********************************************************/
 
 #include <config_cmd_default.h>
-
+#define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_CMD_DATE
 
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 
 #define CONFIG_ETHPRIME		"FEC0"
 
@@ -235,6 +235,7 @@
 
 #define CONFIG_SYS_DDR_CLKSEL	0
 #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
+#define CONFIG_SYS_MAIN_PWR_ON
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 1916b85..a0af3ee 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -59,6 +59,7 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    8
+#define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_RTC_MC13XXX
 
 /* MMC Configs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index a110176..e30502b 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -93,6 +93,7 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_DIALOG_POWER
 #define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC13892
 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR	0x48
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
 
@@ -103,10 +104,11 @@
 
 /* Command definition */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTDELAY	1
 
 #define CONFIG_ETHPRIME		"FEC0"
 
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index 28a3deb..138e460 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -22,6 +22,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_MX6
 #define CONFIG_MX6Q
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index a5c93d0..0f226f7 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -17,6 +17,7 @@
 #ifndef __MX6QSABRE_COMMON_CONFIG_H
 #define __MX6QSABRE_COMMON_CONFIG_H
 
+#define CONFIG_MX6
 #define CONFIG_MX6Q
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -72,9 +73,10 @@
 /* Command definition */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_BOOTDELAY               3
+#define CONFIG_BOOTDELAY               1
 
 #define CONFIG_LOADADDR                        0x10800000
 #define CONFIG_SYS_TEXT_BASE           0x17800000
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index a28d5a5..4ce4d4c 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -22,6 +22,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_MX6
 #define CONFIG_MX6Q
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -143,7 +144,7 @@
 
 #undef CONFIG_CMD_IMLS
 
-#define CONFIG_BOOTDELAY	       3
+#define CONFIG_BOOTDELAY	       1
 
 #define CONFIG_PREBOOT                 ""
 
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index c5dd494..3f9802c 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -28,6 +28,9 @@
 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
 #define	CONFIG_PALMLD		1	/* Palm LifeDrive board */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
+
 /*
  * Environment settings
  */
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 9c948c5..64771e7 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -30,6 +30,9 @@
 #define	CONFIG_CPU_PXA25X			1	/* Intel PXA255 CPU */
 #define	CONFIG_PALMTC			1	/* Palm Tungsten|C board */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
+
 /*
  * Environment settings
  */
diff --git a/include/configs/paz00.h b/include/configs/paz00.h
index 5603de9..38c79cf 100644
--- a/include/configs/paz00.h
+++ b/include/configs/paz00.h
@@ -45,8 +45,11 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 894f38b..eb13bb3 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -34,6 +34,7 @@
 #define CONFIG_S5P		1	/* which is in a S5P Family */
 #define CONFIG_EXYNOS4210	1	/* which is in a EXYNOS4210 */
 #define CONFIG_UNIVERSAL	1	/* working with Universal */
+#define CONFIG_TIZEN		1	/* TIZEN lib */
 
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 
@@ -56,6 +57,8 @@
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
@@ -261,4 +264,37 @@
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
 
+/*
+ * SPI Settings
+ */
+#define CONFIG_SOFT_SPI
+#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
+#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1)
+#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3)
+#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0)
+#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3)
+
+#define SPI_DELAY udelay(1)
+#undef SPI_INIT
+#define SPI_SCL(bit) universal_spi_scl(bit)
+#define SPI_SDA(bit) universal_spi_sda(bit)
+#define SPI_READ universal_spi_read()
+#ifndef	__ASSEMBLY__
+void universal_spi_scl(int bit);
+void universal_spi_sda(int bit);
+int universal_spi_read(void);
+#endif
+
+/*
+ * LCD Settings
+ */
+#define CONFIG_EXYNOS_FB
+#define CONFIG_LCD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_32BPP
+#define CONFIG_LD9040
+#define CONFIG_EXYNOS_MIPI_DSIM
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((520 * 120 * 4) + (1 << 12))
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index ab10bd0..de0c777 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -54,6 +54,7 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_SEABOARD
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT		/* Make sure LCD init is complete */
 
 /* I2C */
 #define CONFIG_TEGRA_I2C
@@ -71,8 +72,11 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
@@ -102,7 +106,13 @@
 /* USB keyboard */
 #define CONFIG_USB_KEYBOARD
 
-#include "tegra-common-post.h"
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP				LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES	10
 
 /* NAND support */
 #define CONFIG_CMD_NAND
@@ -111,6 +121,6 @@
 /* Max number of NAND devices */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* Somewhat oddly, the NAND base address must be a config option */
-#define CONFIG_SYS_NAND_BASE	NV_PA_NAND_BASE
+#include "tegra-common-post.h"
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 39a347a..75c25c0 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -65,7 +65,7 @@
 #define INFORM1_OFFSET			0x804
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
 
 /* select serial console configuration */
 #define CONFIG_SERIAL3			/* use SERIAL 3 */
@@ -163,7 +163,6 @@
 #undef CONFIG_CMD_IMLS
 #define CONFIG_IDENT_STRING		" for SMDK5250"
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 
 #define CONFIG_SECURE_BL1_ONLY
@@ -188,6 +187,11 @@
 /* U-boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
+
+#define OM_STAT				(0x1f << 1)
+#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
+#define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_IRAM_STACK	0x02050000
@@ -205,6 +209,58 @@
 #define CONFIG_SYS_I2C_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
+/* PMIC */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS	5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS	1
+#define CONFIG_ENV_SPI_MAX_HZ	50000000
+#endif
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED		50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS	5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS	1
+#define CONFIG_ENV_SPI_MAX_HZ	50000000
+#endif
+
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SMC911X
@@ -213,6 +269,20 @@
 #define CONFIG_ENV_SROM_BANK		1
 #endif /*CONFIG_CMD_NET*/
 
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+/* Sound */
+#define CONFIG_CMD_SOUND
+#ifdef CONFIG_CMD_SOUND
+#define CONFIG_SOUND
+#define CONFIG_I2S
+#define CONFIG_SOUND_WM8994
+#endif
+
 /* Enable devicetree support */
 #define CONFIG_OF_LIBFDT
 
diff --git a/include/configs/tec.h b/include/configs/tec.h
index 140d2e6..200cf66 100644
--- a/include/configs/tec.h
+++ b/include/configs/tec.h
@@ -54,7 +54,6 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		NV_PA_NAND_BASE
 
 /* Environment in NAND, aligned to start of last sector */
 #define CONFIG_ENV_IS_IN_NAND
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 6f310be..ee40cc2 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -30,18 +30,6 @@
 
 #else
 
-#ifdef CONFIG_CMD_EXT2
-#define BOOT_FSTYPE_EXT2 "ext2 "
-#else
-#define BOOT_FSTYPE_EXT2 ""
-#endif
-
-#ifdef CONFIG_CMD_FAT
-#define BOOT_FSTYPE_FAT "fat"
-#else
-#define BOOT_FSTYPE_FAT ""
-#endif
-
 #ifdef CONFIG_CMD_MMC
 #define BOOTCMDS_MMC \
 	"mmc_boot=" \
@@ -98,7 +86,7 @@
 	"rootpart=1\0" \
 	\
 	"script_boot="                                                    \
-		"if ${fs}load ${devtype} ${devnum}:${rootpart} "          \
+		"if load ${devtype} ${devnum}:${rootpart} "               \
 				"${scriptaddr} ${prefix}${script}; then " \
 			"echo ${script} found! Executing ...;"            \
 			"source ${scriptaddr};"                           \
@@ -106,11 +94,9 @@
 	\
 	"scan_boot="                                                      \
 		"echo Scanning ${devtype} ${devnum}...; "                 \
-		"for fs in ${boot_fstypes}; do "                          \
-			"for prefix in ${boot_prefixes}; do "             \
-				"for script in ${boot_scripts}; do "      \
-					"run script_boot; "               \
-				"done; "                                  \
+		"for prefix in ${boot_prefixes}; do "                     \
+			"for script in ${boot_scripts}; do "              \
+				"run script_boot; "                       \
 			"done; "                                          \
 		"done;\0"                                                 \
 	\
@@ -120,11 +106,6 @@
 		BOOT_TARGETS_DHCP " " \
 		"\0" \
 	\
-	"boot_fstypes=" \
-		BOOT_FSTYPE_EXT2 " " \
-		BOOT_FSTYPE_FAT " " \
-		"\0" \
-	\
 	"boot_prefixes=/ /boot/\0" \
 	\
 	"boot_scripts=boot.scr.uimg boot.scr\0" \
@@ -181,8 +162,8 @@
 
 #define TEGRA_DEVICE_SETTINGS \
 	"stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \
-	"stdout=serial\0" \
-	"stderr=serial\0" \
+	"stdout=serial,lcd\0" \
+	"stderr=serial,lcd\0" \
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
@@ -226,12 +207,24 @@
 #ifdef CONFIG_EFI_PARTITION
 #undef CONFIG_EFI_PARTITION
 #endif
+#ifdef CONFIG_CMD_FS_GENERIC
+#undef CONFIG_CMD_FS_GENERIC
+#endif
+#ifdef CONFIG_CMD_EXT4
+#undef CONFIG_CMD_EXT4
+#endif
 #ifdef CONFIG_CMD_EXT2
 #undef CONFIG_CMD_EXT2
 #endif
 #ifdef CONFIG_CMD_FAT
 #undef CONFIG_CMD_FAT
 #endif
+#ifdef CONFIG_FS_EXT4
+#undef CONFIG_FS_EXT4
+#endif
+#ifdef CONFIG_FS_FAT
+#undef CONFIG_FS_FAT
+#endif
 
 /* remove USB */
 #ifdef CONFIG_USB_EHCI
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 5c0833a..fe07f72 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -38,6 +38,9 @@
 
 #include <asm/arch/tegra.h>		/* get chip and board defs */
 
+/* Align LCD to 1MB boundary */
+#define CONFIG_LCD_ALIGNMENT	MMU_SECTION_SIZE
+
 /*
  * Display CPU and Board information
  */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 94ba55e..6efee5c 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -211,12 +211,17 @@
 
 #define CONFIG_SYS_HZ			1000
 
-/* TRATS has 2 banks of DRAM */
-#define CONFIG_NR_DRAM_BANKS	2
-#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
-#define PHYS_SDRAM_1_SIZE	(512 << 20)		/* 512 MB in CS 0 */
-#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
-#define PHYS_SDRAM_2_SIZE	(512 << 20)		/* 512 MB in CS 0 */
+/* TRATS has 4 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS	4
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2		(CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3		(CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE	SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4		(CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE	SDRAM_BANK_SIZE
 
 #define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */
 
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index eeb0dbe..334d3a3 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -69,8 +69,11 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* Environment in SPI */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -80,6 +83,7 @@
 #define CONFIG_ENV_OFFSET		(512 * 1024)
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
 #define CONFIG_USB_STORAGE
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index 4c9b31c..b55ebc9 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -52,8 +52,11 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /* Environment in eMMC, at the end of 2nd "boot sector" */
 #define CONFIG_ENV_IS_IN_MMC
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index a72010f..226d049 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -196,6 +196,7 @@
 /* 166 MHz DDR RAM */
 #define CONFIG_SYS_DDR_CLKSEL		0
 #define CONFIG_SYS_CLKTL_CBCDR		0x19239100
+#define CONFIG_SYS_MAIN_PWR_ON
 
 #define CONFIG_SYS_NO_FLASH
 
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 1c7803b..1e554d8 100644
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -61,8 +61,11 @@
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
 /*
  * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
diff --git a/include/configs/woodburn.h b/include/configs/woodburn.h
new file mode 100644
index 0000000..95a71c4
--- /dev/null
+++ b/include/configs/woodburn.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration for the woodburn board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include "woodburn_common.h"
+
+/* Set TEXT at the beginning of the NOR flash */
+#define CONFIG_SYS_TEXT_BASE	0xA0000000
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
new file mode 100644
index 0000000..a1452b9
--- /dev/null
+++ b/include/configs/woodburn_common.h
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration for the woodburn board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __WOODBURN_COMMON_CONFIG_H
+#define __WOODBURN_COMMON_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136	/* This is an arm1136 CPU core */
+#define CONFIG_MX35
+#define CONFIG_MX35_HCLK_FREQ	24000000
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+#define CONFIG_DISPLAY_CPUINFO
+
+/* Only in case the value is not present in mach-types.h */
+#ifndef MACH_TYPE_FLEA3
+#define MACH_TYPE_FLEA3                3668
+#endif
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
+
+/* This is required to setup the ESDC controller */
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_BASE		I2C1_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_MXC_SPI
+#define CONFIG_MXC_GPIO
+
+/* PMIC Controller */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_FSL
+#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
+#define CONFIG_RTC_MC13XXX
+
+
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+/*
+ * UART (console)
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+
+/*
+ * Command definition
+ */
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_DNS
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_CMD_GPIO
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_NET_RETRY_COUNT	100
+
+#define CONFIG_BOOTDELAY	3
+
+#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
+
+
+/*
+ * Ethernet on SOC (FEC)
+ */
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE	FEC_BASE_ADDR
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_FEC_MXC_PHYADDR	0x1
+
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"woodburn U-Boot > "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(256 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(LOW_LEVEL_SRAM_STACK - \
+						IRAM_BASE_ADDR - \
+						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(IRAM_BASE_ADDR + \
+					CONFIG_SYS_GBL_DATA_OFFSET)
+
+/*
+ * MTD Command for mtdparts
+ */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:50m(root1)," \
+				"32m(rootfb)," \
+				"64m(pcache)," \
+				"64m(app1)," \
+				"10m(app2),-(spool);" \
+				"physmap-flash.0:512k(u-boot),64k(env1)," \
+				"64k(env2),3776k(kernel1),3776k(kernel2)"
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
+#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
+/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
+				CONFIG_SYS_MONITOR_LEN)
+
+#define CONFIG_ENV_IS_IN_FLASH
+
+/*
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER
+
+/* A non-standard buffered write algorithm */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
+#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */
+
+/*
+ * NAND FLASH driver setup
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_NAND_MXC_V1_1
+#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+#if 0
+#define CONFIG_MTD_DEBUG
+#define CONFIG_MTD_DEBUG_VERBOSE	7
+#endif
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/*
+ * Default environment and default scripts
+ * to update uboot and load kernel
+ */
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define CONFIG_HOSTNAME woodburn
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip_sta=setenv bootargs ${bootargs} "			\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
+	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
+		"else run addip_sta;fi\0"	\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttymxc0,${baudrate}\0"			\
+	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
+	"loadaddr=80800000\0"						\
+	"kernel_addr_r=80800000\0"					\
+	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
+	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
+	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
+	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
+		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
+	"net_self=if run net_self_load;then "				\
+		"run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
+		"else echo Images not loades;fi\0"			\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
+	"update=protect off ${uboot_addr} +80000;"			\
+		"erase ${uboot_addr} +80000;"				\
+		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
+	"upd=if run load;then echo Updating u-boot;if run update;"	\
+		"then echo U-Boot updated;"				\
+			"else echo Error updating u-boot !;"		\
+			"echo Board without bootloader !!;"		\
+		"fi;"							\
+		"else echo U-Boot not downloaded..exiting;fi\0"		\
+	"bootcmd=run net_nfs\0"
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
new file mode 100644
index 0000000..63185c5
--- /dev/null
+++ b/include/configs/woodburn_sd.h
@@ -0,0 +1,60 @@
+/*
+ * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration for the woodburn board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include "woodburn_common.h"
+
+/* Set TEXT in RAM */
+#define CONFIG_SYS_TEXT_BASE	0x82000000
+
+#define CONFIG_BOOT_INTERNAL
+
+/*
+ * SPL
+ */
+#define	CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm1136/u-boot-spl.lds"
+#define	CONFIG_SPL_LIBCOMMON_SUPPORT
+#define	CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x100 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x400 /* 512 KB */
+#define	CONFIG_SPL_GPIO_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE		0x10002300
+#define CONFIG_SPL_MAX_SIZE		(64 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
+#define CONFIG_SPL_BSS_START_ADDR	0x8f080000 /* end of RAM */
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+
+#endif				/* __CONFIG_H */
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index bf6394a..b92f70b 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -41,6 +41,9 @@
 #define CONFIG_ENV_ADDR			0x40000
 #define CONFIG_ENV_SIZE			0x20000
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_DCACHE_OFF
+
 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_ARCH_CPU_INIT
 
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 447683a..e9216d9 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -109,9 +109,9 @@
 #define CONFIG_USB_EHCI			/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT	2
-#define CONFIG_MXC_USB_PORTSC	0xC0000000
-#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION