omap730p2: Remove board

Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 0 insertions, 539 deletions

diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h
deleted file mode 100644
index 4ba2c55..0000000
--- a/include/configs/h2_p2_dbg_board.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   TI H2 and P2 Debug Board hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- *	   Dave Peverley
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __INCLUDED_H2_P2_DBH_BOARD_H
-#define __INCLUDED_H2_P2_DBH_BOARD_H
-
-#include <asm/sizes.h>
-
-/*
- * The Debug board is designed to function with the P2 Sample, H2
- * Sample and 1610 Innovator boards. The main difference AFAICT is
- * the chip selects used with each system ;
- *
- *   P2 Sample : CS1 of OMAP730 is used to select the CPLD & LAN regs
- *   H2 Sample : CS1a is used to select the CPLD registers.
- *
- */
-
-/***************************************************************************
- * CPLD Registers
- **************************************************************************/
-
-#define H2DBG_CPLD_REVISION        0x04000010
-#define H2DBG_BOARD_REVISION       0x04000012
-#define H2DBG_GPIO_REGISTER        0x04000014
-#define H2DBG_LED_CONTROL          0x04000016
-#define H2DBG_MISC_INPUT           0x04000018
-#define H2DBG_LAN_STATUS           0x0400001A
-#define H2DBG_LAN_RESET            0x0400001C
-#define H2DBG_ETH_REG_BASE         0x04000300
-
-/***************************************************************************
- * Ethernet Control Registers
- * These are for the LAN91C96 on the debug board
- **************************************************************************/
-
-/* Bank 0 in IO space */
-
-#define ETH_TCR            (H2DBG_ETH_REG_BASE + 0x00)   /* Transmit Control Register */
-#define ETH_EPH_STATUS     (H2DBG_ETH_REG_BASE + 0x02)   /* EPH Status Register */
-#define ETH_RCR            (H2DBG_ETH_REG_BASE + 0x04)   /* Receive Control Register */
-#define ETH_COUNTER        (H2DBG_ETH_REG_BASE + 0x06)   /* Counter Register */
-#define ETH_MIR            (H2DBG_ETH_REG_BASE + 0x08)   /* Memory Information Register */
-#define ETH_MCR            (H2DBG_ETH_REG_BASE + 0x0A)   /* Memory Configuration Register */
-
-/* Bank 1 in IO space */
-
-#define ETH_CONFIG         (H2DBG_ETH_REG_BASE + 0x00)   /* Configuration Register */
-#define ETH_BASE           (H2DBG_ETH_REG_BASE + 0x02)   /* Base Address Register */
-#define ETH_IA0            (H2DBG_ETH_REG_BASE + 0x04)   /* Individual Address Register - 0 */
-#define ETH_IA1            (H2DBG_ETH_REG_BASE + 0x05)   /* Individual Address Register - 1 */
-#define ETH_IA2            (H2DBG_ETH_REG_BASE + 0x06)   /* Individual Address Register - 2 */
-#define ETH_IA3            (H2DBG_ETH_REG_BASE + 0x07)   /* Individual Address Register - 3 */
-#define ETH_IA4            (H2DBG_ETH_REG_BASE + 0x08)   /* Individual Address Register - 4 */
-#define ETH_IA5            (H2DBG_ETH_REG_BASE + 0x09)   /* Individual Address Register - 5 */
-#define ETH_GEN_PURPOSE    (H2DBG_ETH_REG_BASE + 0x0A)   /* General Address Registers */
-#define ETH_CONTROL        (H2DBG_ETH_REG_BASE + 0x0B)   /* Control Register */
-
-/* Bank 2 in IO space */
-
-#define ETH_MMU            (H2DBG_ETH_REG_BASE + 0x00)   /* MMU Command Register */
-#define ETH_AUTO_TX_START  (H2DBG_ETH_REG_BASE + 0x01)   /* Auto Tx Start Register */
-#define ETH_PNR            (H2DBG_ETH_REG_BASE + 0x02)   /* Packet Number Register */
-#define ETH_ARR            (H2DBG_ETH_REG_BASE + 0x03)   /* Allocation Result Register */
-#define ETH_FIFO           (H2DBG_ETH_REG_BASE + 0x04)   /* FIFO Ports Register */
-#define ETH_POINTER        (H2DBG_ETH_REG_BASE + 0x06)   /* Pointer Register */
-#define ETH_DATA_HIGH      (H2DBG_ETH_REG_BASE + 0x08)   /* Data High Register */
-#define ETH_DATA_LOW       (H2DBG_ETH_REG_BASE + 0x0A)   /* Data Low Register */
-#define ETH_INT_STATS      (H2DBG_ETH_REG_BASE + 0x0C)   /* Interrupt Status Register - RO */
-#define ETH_INT_ACK        (H2DBG_ETH_REG_BASE + 0x0C)   /* Interrupt Acknowledge Register -WO */
-#define ETH_INT_MASK       (H2DBG_ETH_REG_BASE + 0x0D)   /* Interrupt Mask Register */
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * A couple of utility inlines to aid debugging using the LED's on the
- * debug board.
- */
-
-static inline void set_led_state(int state)
-{
-	static unsigned long hw_led_state = 0;
-	volatile unsigned short *led_address = (volatile unsigned short *)0x04000016;
-
-	hw_led_state = ((unsigned long)state);
-	*((unsigned short *) (led_address)) = (unsigned short) (~hw_led_state & 0xFFFF);
-}
-
-
-static inline void spin_up_leds(void)
-{
-	volatile int i, j, k;
-
-	for (k = 0; k < 2; k++) {
-		for (i = 0; i < 16; i++) {
-			for (j = 0; j < 5000; j++) {
-				set_led_state(1 << i);
-			}
-		}
-		for (i = 15; i >= 0; i--) {
-			for (j = 0; j < 5000; j++) {
-				set_led_state(1 << i);
-			}
-		}
-	}
-}
-
-#endif    /* !  __ASSEMBLY__ */
-
-#endif    /* !  __INCLUDED_H2_P2_DBH_BOARD_H */
diff --git a/include/configs/omap730.h b/include/configs/omap730.h
deleted file mode 100644
index b54e0fb..0000000
--- a/include/configs/omap730.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *   OMAP730 hardware map
- *
- * Copyright (C) 2004 MPC-Data Limited. (http://www.mpc-data.co.uk)
- * Author: MPC-Data Limited
- *	   Dave Peverley
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __INCLUDED_OMAP730_H
-#define __INCLUDED_OMAP730_H
-
-#include <asm/sizes.h>
-
-/***************************************************************************
- * OMAP730 Configuration Registers
- **************************************************************************/
-
-#define PERSEUS2_MPU_DEV_ID               ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GSM_DEV_ID0              ((unsigned int)(0xFFFE1000))
-#define PERSEUS2_GDM_DEV_ID1              ((unsigned int)(0xFFFE1002))
-#define DSP_CONF                          ((unsigned int)(0xFFFE1004))
-#define PERSEUS2_MPU_DIE_ID0              ((unsigned int)(0xFFFE1008))
-#define GSM_ASIC_CONF                     ((unsigned int)(0xFFFE1008))
-#define PERSEUS2_MPU_DIE_ID1              ((unsigned int)(0xFFFE100C))
-#define PERSEUS2_MODE1                    ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID0              ((unsigned int)(0xFFFE1010))
-#define PERSEUS2_GSM_DIE_ID1              ((unsigned int)(0xFFFE1012))
-#define PERSEUS2_MODE2                    ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID2              ((unsigned int)(0xFFFE1014))
-#define PERSEUS2_GSM_DIE_ID3              ((unsigned int)(0xFFFE1016))
-#define PERSEUS2_ANALOG_CELLS_CONF        ((unsigned int)(0xFFFE1018))
-#define SPECCTL                           ((unsigned int)(0xFFFE101C))
-#define SPARE1                            ((unsigned int)(0xFFFE1020))
-#define SPARE2                            ((unsigned int)(0xFFFE1024))
-#define GSM_PBG_IRQ                       ((unsigned int)(0xFFFE1028))
-#define DMA_REQ_CONF                      ((unsigned int)(0xFFFE1030))
-#define PE_CONF_NO_DUAL                   ((unsigned int)(0xFFFE1060))
-#define PERSEUS2_IO_CONF0                 ((unsigned int)(0xFFFE1070))
-#define PERSEUS2_IO_CONF1                 ((unsigned int)(0xFFFE1074))
-#define PERSEUS2_IO_CONF2                 ((unsigned int)(0xFFFE1078))
-#define PERSEUS2_IO_CONF3                 ((unsigned int)(0xFFFE107C))
-#define PERSEUS2_IO_CONF4                 ((unsigned int)(0xFFFE1080))
-#define PERSEUS2_IO_CONF5                 ((unsigned int)(0xFFFE1084))
-#define PERSEUS2_IO_CONF6                 ((unsigned int)(0xFFFE1088))
-#define PERSEUS2_IO_CONF7                 ((unsigned int)(0xFFFE108C))
-#define PERSEUS2_IO_CONF8                 ((unsigned int)(0xFFFE1090))
-#define PERSEUS2_IO_CONF9                 ((unsigned int)(0xFFFE1094))
-#define PERSEUS2_IO_CONF10                ((unsigned int)(0xFFFE1098))
-#define PERSEUS2_IO_CONF11                ((unsigned int)(0xFFFE109C))
-#define PERSEUS2_IO_CONF12                ((unsigned int)(0xFFFE10A0))
-#define PERSEUS2_IO_CONF13                ((unsigned int)(0xFFFE10A4))
-#define PERSEUS_PCC_CONF_REG              ((unsigned int)(0xFFFE10B4))
-#define BIST_STATUS_INTERNAL              ((unsigned int)(0xFFFE10B8))
-#define BIST_CONTROL                      ((unsigned int)(0xFFFE10C0))
-#define BOOT_ROM_REG                      ((unsigned int)(0xFFFE10C4))
-#define PRODUCTION_ID_REG                 ((unsigned int)(0xFFFE10C8))
-#define BIST_SECROM_SIGNATURE1_INTERNAL   ((unsigned int)(0xFFFE10D0))
-#define BIST_SECROM_SIGNATURE2_INTERNAL   ((unsigned int)(0xFFFE10D4))
-#define BIST_CONTROL_2                    ((unsigned int)(0xFFFE10D8))
-#define DEBUG1                            ((unsigned int)(0xFFFE10E0))
-#define DEBUG2                            ((unsigned int)(0xFFFE10E4))
-#define DEBUG_DMA_IRQ                     ((unsigned int)(0xFFFE10E8))
-
-/***************************************************************************
- * OMAP730 EMIFS Registers                                       (TRM 2.5.7)
- **************************************************************************/
-
-#define TCMIF_BASE                 0xFFFECC00
-
-#define EMIFS_LRUREG               (TCMIF_BASE + 0x04)
-#define EMIFS_CONFIG               (TCMIF_BASE + 0x0C)
-#define FLASH_CFG_0                (TCMIF_BASE + 0x10)
-#define FLASH_CFG_1                (TCMIF_BASE + 0x14)
-#define FLASH_CFG_2                (TCMIF_BASE + 0x18)
-#define FLASH_CFG_3                (TCMIF_BASE + 0x1C)
-#define FL_CFG_DYN_WAIT            (TCMIF_BASE + 0x40)
-#define EMIFS_TIMEOUT1_REG         (TCMIF_BASE + 0x28)
-#define EMIFS_TIMEOUT2_REG         (TCMIF_BASE + 0x2C)
-#define EMIFS_TIMEOUT3_REG         (TCMIF_BASE + 0x30)
-#define EMIFS_ABORT_ADDR           (TCMIF_BASE + 0x44)
-#define EMIFS_ABORT_TYPE           (TCMIF_BASE + 0x48)
-#define EMIFS_ABORT_TOUT           (TCMIF_BASE + 0x4C)
-#define FLASH_ACFG_0_1             (TCMIF_BASE + 0x50)
-#define FLASH_ACFG_1_1             (TCMIF_BASE + 0x54)
-#define FLASH_ACFG_2_1             (TCMIF_BASE + 0x58)
-#define FLASH_ACFG_3_1             (TCMIF_BASE + 0x5C)
-
-/***************************************************************************
- * OMAP730 Interrupt handlers
- **************************************************************************/
-
-#define OMAP_IH1_BASE		0xFFFECB00     /* MPU Level 1 IRQ handler */
-#define OMAP_IH2_BASE           0xfffe0000
-
-/***************************************************************************
- * OMAP730 Timers
- *
- * There are three general purpose OS timers in the 730 that can be
- * configured in autoreload or one-shot modes.
- **************************************************************************/
-
-#define OMAP730_32kHz_TIMER_BASE  0xFFFB9000
-
-/* 32k Timer Registers */
-#define TIMER32k_CR               0x08
-#define TIMER32k_TVR              0x00
-#define TIMER32k_TCR              0x04
-
-/* 32k Timer Control Register definition */
-#define TIMER32k_TSS              (1<<0)
-#define TIMER32k_TRB              (1<<1)
-#define TIMER32k_INT              (1<<2)
-#define TIMER32k_ARL              (1<<3)
-
-/* MPU Timer base addresses  */
-#define OMAP730_MPUTIMER_BASE	0xfffec500
-#define OMAP730_MPUTIMER_OFF	0x00000100
-
-#define OMAP730_TIMER1_BASE	0xFFFEC500
-#define OMAP730_TIMER2_BASE	0xFFFEC600
-#define OMAP730_TIMER3_BASE	0xFFFEC700
-
-/* MPU Timer Register offsets */
-#define CNTL_TIMER	           0x00   /* MPU_CNTL_TIMER */
-#define LOAD_TIM	           0x04   /* MPU_LOAD_TIMER */
-#define READ_TIM	           0x08   /* MPU_READ_TIMER */
-
-/* MPU_CNTL_TIMER register bits */
-#define MPUTIM_FREE               (1<<6)
-#define MPUTIM_CLOCK_ENABLE       (1<<5)
-#define MPUTIM_PTV_MASK           (0x7<<MPUTIM_PTV_BIT)
-#define MPUTIM_PTV_BIT            2
-#define MPUTIM_AR                 (1<<1)
-#define MPUTIM_ST                 (1<<0)
-
-/***************************************************************************
- * OMAP730 GPIO
- *
- * The GPIO control is split over 6 register bases in the OMAP730 to allow
- * access to all the (6 x 32) GPIO pins!
- **************************************************************************/
-
-#define OMAP730_GPIO_BASE_1        0xFFFBC000
-#define OMAP730_GPIO_BASE_2        0xFFFBC800
-#define OMAP730_GPIO_BASE_3        0xFFFBD000
-#define OMAP730_GPIO_BASE_4        0xFFFBD800
-#define OMAP730_GPIO_BASE_5        0xFFFBE000
-#define OMAP730_GPIO_BASE_6        0xFFFBE800
-
-#define GPIO_DATA_INPUT            0x00
-#define GPIO_DATA_OUTPUT           0x04
-#define GPIO_DIRECTION_CONTROL     0x08
-#define GPIO_INTERRUPT_CONTROL     0x0C
-#define GPIO_INTERRUPT_MASK        0x10
-#define GPIO_INTERRUPT_STATUS      0x14
-
-#define GPIO_DATA_INPUT_1            ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_1           ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_1     ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_1        ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_1      ((unsigned int)(OMAP730_GPIO_BASE_1 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_2            ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_2           ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_2     ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_2        ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_2      ((unsigned int)(OMAP730_GPIO_BASE_2 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_3            ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_3           ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_3     ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_3        ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_3      ((unsigned int)(OMAP730_GPIO_BASE_3 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_4            ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_4           ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_4     ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_4        ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_4      ((unsigned int)(OMAP730_GPIO_BASE_4 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_5            ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_5           ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_5     ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_5        ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_5      ((unsigned int)(OMAP730_GPIO_BASE_5 + GPIO_INTERRUPT_STATUS))
-
-#define GPIO_DATA_INPUT_6            ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_INPUT))
-#define GPIO_DATA_OUTPUT_6           ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DATA_OUTPUT))
-#define GPIO_DIRECTION_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_DIRECTION_CONTROL))
-#define GPIO_INTERRUPT_CONTROL_6     ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_CONTROL))
-#define GPIO_INTERRUPT_MASK_6        ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_MASK))
-#define GPIO_INTERRUPT_STATUS_6      ((unsigned int)(OMAP730_GPIO_BASE_6 + GPIO_INTERRUPT_STATUS))
-
-/***************************************************************************
- * OMAP730 Watchdog timers
- **************************************************************************/
-
-#define WDTIM_BASE                 0xFFFEC800
-#define WDTIM_CONTROL              (WDTIM_BASE + 0x00)    /* MPU_CNTL_TIMER */
-#define WDTIM_LOAD                 (WDTIM_BASE + 0x04)    /* MPU_LOAD_TIMER */
-#define WDTIM_READ                 (WDTIM_BASE + 0x04)    /* MPU_READ_TIMER */
-#define WDTIM_MODE                 (WDTIM_BASE + 0x08)    /* MPU_TIMER_MODE */
-
-/***************************************************************************
- * OMAP730 Interrupt Registers
- **************************************************************************/
-
-/* Interrupt Register offsets */
-
-#define IRQ_ITR                               0x00
-#define IRQ_MIR                               0x04
-#define IRQ_SIR_IRQ                           0x10
-#define IRQ_SIR_FIQ                           0x14
-#define IRQ_CONTROL_REG                       0x18
-#define IRQ_ILR0                              0x1C  /* ILRx == ILR0 + (0x4 * x) */
-#define IRQ_SIR                               0x9C  /* a.k.a.IRQ_ISR */
-#define IRQ_GMIR                              0xA0
-
-#define REG_IHL1_MIR  (OMAP_IH1_BASE + IRQ_MIR)
-#define REG_IHL2_MIR  (OMAP_IH2_BASE + IRQ_MIR)
-
-/***************************************************************************
- * OMAP730 Intersystem Communication Register                      (TRM 4.5)
- **************************************************************************/
-
-#define ICR_BASE                   0xFFFBB800
-
-#define M_ICR                      (ICR_BASE + 0x00)
-#define G_ICR                      (ICR_BASE + 0x02)
-#define M_CTL                      (ICR_BASE + 0x04)
-#define G_CTL                      (ICR_BASE + 0x06)
-#define PM_BA                      (ICR_BASE + 0x0A)
-#define DM_BA                      (ICR_BASE + 0x0C)
-#define RM_BA                      (ICR_BASE + 0x0E)
-#define SSPI_TAS                   (ICR_BASE + 0x12)
-
-#endif /* ! __INCLUDED_OMAP730_H */
diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
deleted file mode 100644
index 947f27b..0000000
--- a/include/configs/omap730p2.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * MPC Data Limited (http://www.mpc-data.co.uk)
- * Dave Peverley <dpeverley at mpc-data.co.uk>
- *
- * Configuation settings for the TI OMAP Perseus 2 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_ARM926EJS	   1	     /* This is an arm926ejs CPU core  */
-#define CONFIG_OMAP		   1	     /* in a TI OMAP core    */
-#define CONFIG_OMAP730		   1	     /* which is in a 730  */
-#define CONFIG_P2_OMAP730	   1	     /*	 a Perseus 2 Board  */
-
-/*
- * Input clock of PLL
- * The OMAP730 Perseus 2 has 13MHz input clock
- */
-
-#define CONFIG_SYS_CLK_FREQ	   13000000
-
-#define CONFIG_CMDLINE_TAG	   1	     /* enable passing of ATAGs	 */
-#define CONFIG_SETUP_MEMORY_TAGS   1
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN		   (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE	   0x04000300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	   (1)
-#define CONFIG_SYS_NS16550_CLK		   (48000000)	  /* can be 12M/32Khz or 48Mhz */
-#define CONFIG_SYS_NS16550_COM1	   0xfffb0000	  /* uart1, bluetooth uart
-						   * on perseus */
-
-/*
- * select serial console configuration
- */
-
-#define CONFIG_SERIAL1		   1	     /* we use SERIAL 1 on OMAP730 Perseus 2 */
-
-#define CONFIG_CONS_INDEX	   1
-#define CONFIG_BAUDRATE		   115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap730.h>
-#include <configs/h2_p2_dbg_board.h>
-
-#define CONFIG_BOOTDELAY	   3
-#define CONFIG_BOOTARGS		   "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw ip=bootp"
-
-#define CONFIG_LOADADDR		   0x10000000
-
-#define CONFIG_ETHADDR
-#define CONFIG_NETMASK		   255.255.255.0
-#define CONFIG_IPADDR		   192.168.0.23
-#define CONFIG_SERVERIP		   192.150.0.100
-#define CONFIG_BOOTFILE		   "uImage"  /* File to load */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	   115200    /* Speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	   1	     /* Which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LONGHELP				       /* undef to save memory	   */
-#define CONFIG_SYS_PROMPT		   "OMAP730 P2 # "     /* Monitor Command Prompt   */
-#define CONFIG_SYS_CBSIZE		   256		       /* Console I/O Buffer Size  */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		   (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS		   16		       /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		   CONFIG_SYS_CBSIZE	       /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	   0x10000000	       /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		   0x12000000	       /* 32 MB in DRAM	   */
-
-#define CONFIG_SYS_LOAD_ADDR		   0x10000000	       /* default load address */
-
-/* The OMAP730 has 3 general purpose MPU timers, they can be driven by
- * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
- * local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		0xFFFEC500	/* use timer 1 */
-#define CONFIG_SYS_PTV			7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS	   1		  /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		   0x10000000	  /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	   0x02000000	  /* 32 MB */
-
-#if defined(CONFIG_CS0_BOOT)
-#define PHYS_FLASH_1		   0x0C000000
-#elif defined(CONFIG_CS3_BOOT)
-#define PHYS_FLASH_1		   0x00000000
-#else
-#error Unknown Boot Chip-Select number
-#endif
-
-#define PHYS_SRAM		0x20000000
-
-#define CONFIG_SYS_FLASH_BASE		   PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	   1		  /* max number of memory banks */
-#define PHYS_FLASH_SIZE		   0x02000000	  /* 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT	   (259)	  /* max number of sectors on one chip */
-/* addr of environment */
-#define CONFIG_ENV_ADDR		   (CONFIG_SYS_FLASH_BASE + 0x020000)
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	    (20*CONFIG_SYS_HZ)	  /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH	   1
-#define CONFIG_ENV_SIZE		   0x20000	  /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET		   0x20000	  /* environment starts here  */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
-
-#endif	  /* ! __CONFIG_H */