Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

6 files changed, 59 insertions, 28 deletions

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 8234a82..75ea125 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -611,9 +611,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR	0x10
-#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR	0x11
-#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR	4
+#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR	0x01
+#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR	0x02
 
 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 5e988c2..7cfda50 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -79,10 +79,6 @@
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_BUS              0
-#define CONFIG_ENV_SPI_CS               0
-#define CONFIG_ENV_SPI_MAX_HZ           10000000
-#define CONFIG_ENV_SPI_MODE             0
 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE            0x10000
@@ -202,6 +198,7 @@
 /* CPLD on IFC */
 #define CONFIG_SYS_CPLD_BASE	0xffdf0000
 #define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR2_EXT	(0xf)
 #define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 				| CSPR_PORT_SIZE_8 \
 				| CSPR_MSEL_GPCM \
@@ -386,6 +383,10 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
+#define CONFIG_ENV_SPI_BUS              0
+#define CONFIG_ENV_SPI_CS               0
+#define CONFIG_ENV_SPI_MAX_HZ           10000000
+#define CONFIG_ENV_SPI_MODE             0
 
 /*
  * General PCI
@@ -543,13 +544,12 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
-#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
-#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
-#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
+#define CONFIG_SYS_SGMII1_PHY_ADDR		0x03
+#define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
 
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"FM1@DTSEC1"
+#define CONFIG_ETHPRIME		"FM1@DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
@@ -627,9 +627,9 @@
 #define __USB_PHY_TYPE	utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
-	"bank_intlv=cs0_cs1;"					\
-	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+	"hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"			\
+	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
+	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
 	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index aafa813..ed9ca8a 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -79,10 +79,6 @@
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_BUS              0
-#define CONFIG_ENV_SPI_CS               0
-#define CONFIG_ENV_SPI_MAX_HZ           10000000
-#define CONFIG_ENV_SPI_MODE             0
 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE            0x10000
@@ -202,6 +198,7 @@
 /* CPLD on IFC */
 #define CONFIG_SYS_CPLD_BASE	0xffdf0000
 #define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR2_EXT	(0xf)
 #define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 				| CSPR_PORT_SIZE_8 \
 				| CSPR_MSEL_GPCM \
@@ -394,6 +391,10 @@
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
+#define CONFIG_ENV_SPI_BUS              0
+#define CONFIG_ENV_SPI_CS               0
+#define CONFIG_ENV_SPI_MAX_HZ           10000000
+#define CONFIG_ENV_SPI_MODE             0
 
 /*
  * General PCI
@@ -551,8 +552,11 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_RGMII1_PHY_ADDR		0x01
+#define CONFIG_SYS_RGMII2_PHY_ADDR		0x02
+
 #define CONFIG_MII		/* MII PHY management */
-#define CONFIG_ETHPRIME		"FM1@DTSEC1"
+#define CONFIG_ETHPRIME		"FM1@DTSEC4"
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
@@ -631,9 +635,9 @@
 #define __USB_PHY_TYPE	utmi
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:ctlr_intlv=cacheline,"		\
-	"bank_intlv=cs0_cs1;"					\
-	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+	"hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"			\
+	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
+	"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
 	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 2a15ad4..a4e0f7c 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -99,11 +99,16 @@
 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT	"ubi0"
 #endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
 
+#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
+#define CONFIG_KM_UBI_PART_BOOT_OPTS		""
+#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
+
 #ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
 /* one flash chip only called boot */
 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
 # define CONFIG_KM_UBI_LINUX_MTD					\
-	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT
+	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT			\
+	CONFIG_KM_UBI_PART_BOOT_OPTS
 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI				\
 	"ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
 #else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
@@ -111,7 +116,8 @@
 /* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
 /* app:  CONFIG_KM_UBI_PARTITION_NAME_APP */
 # define CONFIG_KM_UBI_LINUX_MTD					\
-	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT " "		\
+	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT			\
+	CONFIG_KM_UBI_PART_BOOT_OPTS " "				\
 	"ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
 # define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI				\
 	"ubiattach=if test ${boot_bank} -eq 0; then; "			\
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 2466649..b9e1bac 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -15,6 +15,10 @@
 
 #define CONFIG_KM_DEF_NETDEV	"netdev=eth0\0"
 
+/* an additionnal option is required for UBI as subpage access is
+ * supported in u-boot */
+#define CONFIG_KM_UBI_PART_BOOT_OPTS		",2048"
+
 #define CONFIG_NAND_ECC_BCH
 
 /* common KM defines */
@@ -148,8 +152,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_KM_KERNEL_ADDR	0x1000000	/* max kernel size 15.5Mbytes */
 #define CONFIG_KM_FDT_ADDR	0x1F80000	/* max dtb    size  0.5Mbytes */
 
-#define CONFIG_BOOTCOUNT_LIMIT
-
 /*
  * Local Bus Definitions
  */
@@ -206,8 +208,13 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */
 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */
 
+/* bootcounter in QRIO */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR	(CONFIG_SYS_QRIO_BASE + 0x20)
+
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
+#define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
@@ -263,7 +270,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
 
 /* I2C */
+
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_SYS_I2C_SPEED		100000 /* deblocking */
 #define CONFIG_SYS_NUM_I2C_BUSES	3
 #define CONFIG_SYS_I2C_MAX_HOPS		1
 #define CONFIG_SYS_I2C_FSL		/* Use FSL I2C driver */
@@ -276,6 +286,12 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 					{0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \
 				}
+#ifndef __ASSEMBLY__
+void set_sda(int state);
+void set_scl(int state);
+int get_sda(void);
+int get_scl(void);
+#endif
 
 #define CONFIG_KM_IVM_BUS		1	/* I2C1 (Mux-Port 1)*/
 
@@ -286,6 +302,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR	/* 4 byte-addressing */
 #define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         20000000
 #define CONFIG_SF_DEFAULT_MODE          0
diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h
index 4158c8d..8bb3571 100644
--- a/include/configs/kmp204x.h
+++ b/include/configs/kmp204x.h
@@ -13,6 +13,11 @@
 #define CONFIG_HOSTNAME		kmlion1
 #define CONFIG_KM_BOARD_NAME	"kmlion1"
 
+/* KMCOGE4 */
+#elif defined(CONFIG_KMCOGE4)
+#define CONFIG_HOSTNAME		kmcoge4
+#define CONFIG_KM_BOARD_NAME	"kmcoge4"
+
 #else
 #error ("Board not supported")
 #endif
@@ -42,6 +47,7 @@
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_SYS_LBAPP1_BR_PRELIM
 /* Local bus app1 Options */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_SYS_LBAPP1_OR_PRELIM
+#endif
 
 /* App2 Local bus */
 #define CONFIG_SYS_LBAPP2_BASE		0xE0000000
@@ -63,6 +69,5 @@
 #define CONFIG_SYS_BR3_PRELIM  CONFIG_SYS_LBAPP2_BR_PRELIM
 /* Local bus app2 Options */
 #define CONFIG_SYS_OR3_PRELIM  CONFIG_SYS_LBAPP2_OR_PRELIM
-#endif
 
 #endif	/* __CONFIG_H */