mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

1 files changed, 150 insertions, 103 deletions

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 5cc9160..f310423 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -68,16 +68,17 @@
  * System performance
  */
 #define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
-#define CONFIG_SYS_SPCR_OPT		1	/* (0-1) Optimize transactions between  CSB and the SEC and QUICC Engine block */
+#define CONFIG_SYS_ACR_RPTCNT	3	/* Arbiter repeat count (0-7) */
+/* (0-1) Optimize transactions between CSB and the SEC and QUICC Engine block */
+#define CONFIG_SYS_SPCR_OPT	1
 
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_BASE	0x00000000	/* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE	CONFIG_SYS_DDR_BASE
 #define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
+#define CONFIG_SYS_DDRCDR	0x73000002	/* DDR II voltage is 1.8V */
 
 #undef CONFIG_SPD_EEPROM
 #if defined(CONFIG_SPD_EEPROM)
@@ -87,51 +88,52 @@
 #else
 /* Manually set up DDR parameters
  */
-#define CONFIG_SYS_DDR_SIZE		64	/* MB */
-#define CONFIG_SYS_DDR_CS0_CONFIG	( CSCONFIG_EN \
+#define CONFIG_SYS_DDR_SIZE	64	/* MB */
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
 				| CSCONFIG_ODT_WR_ACS \
-				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9 )
+				| CSCONFIG_ROW_BIT_13 \
+				| CSCONFIG_COL_BIT_9)
 				/* 0x80010101 */
-#define CONFIG_SYS_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
-				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
-				| ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
-				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
-				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
-				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
+				| (0 << TIMING_CFG0_WRT_SHIFT) \
+				| (0 << TIMING_CFG0_RRT_SHIFT) \
+				| (0 << TIMING_CFG0_WWT_SHIFT) \
+				| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
+				| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
+				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
+				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 				/* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1	( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \
-				| ( 6 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
-				| ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \
-				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
-				| ( 3 << TIMING_CFG1_REFREC_SHIFT ) \
-				| ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
-				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
-				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+#define CONFIG_SYS_DDR_TIMING_1	((2 << TIMING_CFG1_PRETOACT_SHIFT) \
+				| (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
+				| (2 << TIMING_CFG1_ACTTORW_SHIFT) \
+				| (5 << TIMING_CFG1_CASLAT_SHIFT) \
+				| (3 << TIMING_CFG1_REFREC_SHIFT) \
+				| (2 << TIMING_CFG1_WRREC_SHIFT) \
+				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
+				| (2 << TIMING_CFG1_WRTORD_SHIFT))
 				/* 0x26253222 */
-#define CONFIG_SYS_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
-				| (31 << TIMING_CFG2_CPO_SHIFT ) \
-				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
-				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
-				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
-				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
-				| ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
+				| (31 << TIMING_CFG2_CPO_SHIFT) \
+				| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
+				| (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
+				| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
+				| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
+				| (7 << TIMING_CFG2_FOUR_ACT_SHIFT))
 				/* 0x1f9048c7 */
 #define CONFIG_SYS_DDR_TIMING_3	0x00000000
 #define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 				/* 0x02000000 */
-#define CONFIG_SYS_DDR_MODE		( ( 0x4448 << SDRAM_MODE_ESD_SHIFT ) \
-				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+#define CONFIG_SYS_DDR_MODE	((0x4448 << SDRAM_MODE_ESD_SHIFT) \
+				| (0x0232 << SDRAM_MODE_SD_SHIFT))
 				/* 0x44480232 */
-#define CONFIG_SYS_DDR_MODE2		0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL	( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \
-				| ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+#define CONFIG_SYS_DDR_MODE2	0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL	((800 << SDRAM_INTERVAL_REFINT_SHIFT) \
+				| (100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 				/* 0x03200064 */
 #define CONFIG_SYS_DDR_CS0_BNDS	0x00000003
-#define CONFIG_SYS_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
+#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SREN \
 				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
-				| SDRAM_CFG_32_BE )
+				| SDRAM_CFG_32_BE)
 				/* 0x43080000 */
 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
 #endif
@@ -155,16 +157,17 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CONFIG_SYS_MONITOR_LEN	(384 * 1024)	/* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)	/* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
  */
 #define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000		/* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET	\
+			(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * Local Bus Configuration & Clock Setup
@@ -178,30 +181,31 @@
  */
 #define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
-#define CONFIG_SYS_FLASH_BASE		0xFE000000	/* FLASH base address */
+#define CONFIG_SYS_FLASH_BASE	0xFE000000	/* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE		16	/* FLASH size is 16M */
-#define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use h/w Flash protection. */
 
-#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE	/* Window base at flash base */
+					/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
 
-#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE |	/* Flash Base address */ \
-			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
-			BR_V)			/* valid */
-#define CONFIG_SYS_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE \
+				| (2 << BR_PS_SHIFT)	/* 16 bit port */ \
+				| BR_V)			/* valid */
+#define CONFIG_SYS_OR0_PRELIM	0xfe006ff7		/* 16MB Flash size */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* sectors per device */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	128	/* sectors per device */
 
 #undef CONFIG_SYS_FLASH_CHECKSUM
 
 /*
  * SDRAM on the Local Bus
  */
-#undef CONFIG_SYS_LB_SDRAM		/* The board has not SRDAM on local bus */
+#undef CONFIG_SYS_LB_SDRAM	/* The board has not SRDAM on local bus */
 
 #ifdef CONFIG_SYS_LB_SDRAM
-#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CONFIG_SYS_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base addr */
 #define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 #define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_LBC_SDRAM_BASE
@@ -226,7 +230,8 @@
  * the top 17 bits of BR2.
  */
 
-#define CONFIG_SYS_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
+				/*Port size=32bit, MSEL=SDRAM */
+#define CONFIG_SYS_BR2_PRELIM	0xf0001861
 
 /*
  * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
@@ -244,8 +249,10 @@
 
 #define CONFIG_SYS_OR2_PRELIM	0xfc006901
 
-#define CONFIG_SYS_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+				/* LB sdram refresh timer, about 6us */
+#define CONFIG_SYS_LBC_LSRT	0x32000000
+				/* LB refresh timer prescal, 266MHz/32 */
+#define CONFIG_SYS_LBC_MRTPR	0x20000000
 
 #define CONFIG_SYS_LBC_LSDMR_COMMON	0x0063b723
 
@@ -254,7 +261,8 @@
 /*
  * Windows to access PIB via local bus
  */
-#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
+					/* windows base 0xf8008000 */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	0xf8008000
 #define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
 
 /*
@@ -267,7 +275,7 @@
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
 
 #define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+		{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
@@ -361,11 +369,12 @@
  */
 #ifndef CONFIG_SYS_RAMBOOT
 	#define CONFIG_ENV_IS_IN_FLASH	1
-	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_ADDR		\
+			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 	#define CONFIG_ENV_SECT_SIZE	0x20000
 	#define CONFIG_ENV_SIZE		0x2000
 #else
-	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
+	#define CONFIG_SYS_NO_FLASH	1	/* Flash is not usable now */
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
@@ -405,9 +414,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 
 #if (CONFIG_CMD_KGDB)
 	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
@@ -415,17 +424,20 @@
 	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
 
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+				/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
+				/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)	/* Initial Memory map for Linux */
+					/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 /*
  * Core HID Setup
@@ -441,23 +453,40 @@
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
 #define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_IMMR \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_IMMR \
+				| BATU_BL_4M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
 #define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
 
 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_FLASH_BASE \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_FLASH_BASE \
+				| BATU_BL_32M \
+				| BATU_VS \
+				| BATU_VP)
+#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_FLASH_BASE \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
 
 #define CONFIG_SYS_IBAT3L	(0)
@@ -467,20 +496,33 @@
 
 /* Stack in dcache: cacheable, no memory coherence */
 #define CONFIG_SYS_IBAT4L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
-#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4U	(CONFIG_SYS_INIT_RAM_ADDR \
+				| BATU_BL_128K \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
 #define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
 
 #ifdef CONFIG_PCI
 /* PCI MEM space: cacheable */
-#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_PCI1_MEM_PHYS \
+				| BATL_PP_10 \
+				| BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_PCI1_MEM_PHYS \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 /* PCI MMIO space: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MMIO_PHYS | BATL_PP_10 | \
-			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI1_MMIO_PHYS \
+				| BATL_PP_10 \
+				| BATL_CACHEINHIBIT \
+				| BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI1_MMIO_PHYS \
+				| BATU_BL_256M \
+				| BATU_VS \
+				| BATU_VP)
 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 #else
@@ -510,22 +552,26 @@
  */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_HAS_ETH0				/* add support for "ethaddr" */
-#define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
+#define CONFIG_HAS_ETH0		/* add support for "ethaddr" */
+#define CONFIG_HAS_ETH1		/* add support for "eth1addr" */
 
-/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */
-#define CONFIG_SYS_I2C_MAC_OFFSET	0x7f00	/* MAC address offset in I2C EEPROM */
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM
+ * (see CONFIG_SYS_I2C_EEPROM) */
+					/* MAC address offset in I2C EEPROM */
+#define CONFIG_SYS_I2C_MAC_OFFSET	0x7f00
 
-#define CONFIG_NETDEV		eth1
+#define CONFIG_NETDEV		"eth1"
 
 #define CONFIG_HOSTNAME		mpc8323erdb
 #define CONFIG_ROOTPATH		"/nfsroot"
-#define CONFIG_RAMDISKFILE	rootfs.ext2.gz.uboot
 #define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
-#define CONFIG_FDTFILE		mpc832x_rdb.dtb
+				/* U-Boot image on TFTP server */
+#define CONFIG_UBOOTPATH	"u-boot.bin"
+#define CONFIG_FDTFILE		"mpc832x_rdb.dtb"
+#define CONFIG_RAMDISKFILE	"rootfs.ext2.gz.uboot"
 
-#define CONFIG_LOADADDR		800000	/* default location for tftp and bootm */
+				/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		800000
 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
@@ -533,23 +579,24 @@
 #define MK_STR(x)	XMK_STR(x)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
-	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+	"netdev=" CONFIG_NETDEV "\0"					\
+	"uboot=" CONFIG_UBOOTPATH "\0"					\
 	"tftpflash=tftp $loadaddr $uboot;"				\
-		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
-		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
-		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
-		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
+		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
+		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
+		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
+		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
+		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
 	"fdtaddr=780000\0"						\
-	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
+	"fdtfile=" CONFIG_FDTFILE "\0"					\
 	"ramdiskaddr=1000000\0"						\
-	"ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"			\
+	"ramdiskfile=" CONFIG_RAMDISKFILE "\0"				\
 	"console=ttyS0\0"						\
 	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"\
 	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\
+								"$netdev:off "\
 		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
 
 #define CONFIG_NFSBOOTCOMMAND						\