Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

7 files changed, 426 insertions, 5 deletions

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 6887171..1b51fe2 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -191,7 +191,6 @@
 #ifdef	CONFIG_CMD_NET
 #define	CONFIG_ETHPRIME			"FEC0"
 #define	CONFIG_FEC_MXC
-#define	CONFIG_FEC_MXC_MULTI
 #define	CONFIG_MII
 #define	CONFIG_FEC_XCV_TYPE		RMII
 #endif
@@ -274,7 +273,7 @@
 #define	CONFIG_SETUP_MEMORY_TAGS
 #define	CONFIG_BOOTDELAY	3
 #define	CONFIG_BOOTFILE		"uImage"
-#define	CONFIG_BOOTARGS		"console=ttyAM0,115200n8 "
+#define	CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
 #define	CONFIG_BOOTCOMMAND	"run bootcmd_net"
 #define	CONFIG_LOADADDR		0x42000000
 #define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
new file mode 100644
index 0000000..7983c5d
--- /dev/null
+++ b/include/configs/mx23_olinuxino.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __MX23_OLINUXINO_CONFIG_H__
+#define __MX23_OLINUXINO_CONFIG_H__
+
+/*
+ * SoC configurations
+ */
+#define	CONFIG_MX23				/* i.MX23 SoC */
+#define	CONFIG_MXS_GPIO				/* GPIO control */
+#define	CONFIG_SYS_HZ		1000		/* Ticks per second */
+
+#define	CONFIG_MACH_TYPE	4105
+
+#include <asm/arch/regs-base.h>
+
+#define	CONFIG_SYS_NO_FLASH
+#define	CONFIG_BOARD_EARLY_INIT_F
+#define	CONFIG_ARCH_MISC_INIT
+
+/*
+ * SPL
+ */
+#define	CONFIG_SPL
+#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
+#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define	CONFIG_SPL_LIBCOMMON_SUPPORT
+#define	CONFIG_SPL_LIBGENERIC_SUPPORT
+#define	CONFIG_SPL_GPIO_SUPPORT
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+#define	CONFIG_DISPLAY_CPUINFO
+#define	CONFIG_DOS_PARTITION
+
+#define	CONFIG_CMD_CACHE
+#define	CONFIG_CMD_EXT2
+#define	CONFIG_CMD_FAT
+#define	CONFIG_CMD_GPIO
+#define	CONFIG_CMD_MMC
+
+/*
+ * Memory configurations
+ */
+#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define	PHYS_SDRAM_1			0x40000000	/* Base address */
+#define	PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
+#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
+#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
+#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
+#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
+#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+/* Point initial SP in SRAM so SPL can use it too. */
+
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
+#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+/*
+ * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
+ * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
+ * binary. In case there was more of this mess, 0x100 bytes are skipped.
+ */
+#define	CONFIG_SYS_TEXT_BASE		0x40000100
+
+/*
+ * U-Boot general configurations
+ */
+#define	CONFIG_SYS_LONGHELP
+#define	CONFIG_SYS_PROMPT	"=> "
+#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define	CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+						/* Print buffer size */
+#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
+#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
+#define	CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Serial Driver
+ */
+#define	CONFIG_PL011_SERIAL
+#define	CONFIG_PL011_CLOCK		24000000
+#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
+#define	CONFIG_CONS_INDEX		0
+#define	CONFIG_BAUDRATE			115200	/* Default baud rate */
+
+/*
+ * MMC Driver
+ */
+#ifdef	CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
+#endif
+
+/*
+ * APBH DMA
+ */
+#define CONFIG_APBH_DMA
+
+/*
+ * Boot Linux
+ */
+#define	CONFIG_CMDLINE_TAG
+#define	CONFIG_SETUP_MEMORY_TAGS
+#define	CONFIG_BOOTDELAY	3
+#define	CONFIG_BOOTFILE		"uImage"
+#define	CONFIG_LOADADDR		0x42000000
+#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define	CONFIG_OF_LIBFDT
+
+/*
+ * Environment
+ */
+#define	CONFIG_ENV_IS_IN_MMC
+#define	CONFIG_ENV_OVERWRITE
+#ifdef	CONFIG_ENV_IS_IN_MMC
+#define	CONFIG_ENV_OFFSET	(256 * 1024)
+#define	CONFIG_ENV_SIZE	(16 * 1024)
+#define	CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+/*
+ * Extra Environments
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"update_sd_firmware_filename=u-boot.sd\0" \
+	"update_sd_firmware="		/* Update the SD firmware partition */ \
+		"if mmc rescan ; then "	\
+		"if tftp ${update_sd_firmware_filename} ; then " \
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"setexpr fw_sz ${fw_sz} + 1 ; "	\
+		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
+		"fi ; "	\
+		"fi\0" \
+	"script=boot.scr\0"	\
+	"uimage=uImage\0" \
+	"console=ttyAMA0\0" \
+	"fdt_file=imx23-olinuxino.dtb\0" \
+	"fdt_addr=0x41000000\0" \
+	"boot_fdt=try\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript="  \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; "	\
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else " \
+				"echo ERR: Fail to boot from MMC; " \
+			"fi; " \
+		"fi; " \
+	"else exit; fi"
+
+#endif /* __MX23_OLINUXINO_CONFIG_H__ */
diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h
new file mode 100644
index 0000000..c44a8b8
--- /dev/null
+++ b/include/configs/mx23evk.h
@@ -0,0 +1,202 @@
+/*
+ * Freescale i.MX23 EVK board config
+ *
+ * Copyright (C) 2013 Otavio Salvador <otavio@ossystems.com.br>
+ * on behalf of O.S. Systems Software LTDA.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#ifndef __MX23EVK_CONFIG_H__
+#define __MX23EVK_CONFIG_H__
+
+/* SoC configurations */
+#define CONFIG_MX23				/* i.MX23 SoC */
+
+#include <asm/arch/regs-base.h>
+
+#define CONFIG_MXS_GPIO			/* GPIO control */
+#define CONFIG_SYS_HZ		1000		/* Ticks per second */
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX23EVK
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
+
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* U-Boot Commands */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_BOOTZ
+
+/* Memory configurations */
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
+#define CONFIG_STACKSIZE		(128 * 1024)	/* 128 KB stack */
+#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
+#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+/* Point initial SP in SRAM so SPL can use it too. */
+
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
+#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/*
+ * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
+ * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
+ * binary. In case there was more of this mess, 0x100 bytes are skipped.
+ */
+#define CONFIG_SYS_TEXT_BASE	0x40000100
+
+#define CONFIG_ENV_OVERWRITE
+
+/* U-Boot general configurations */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT	"=> "
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	\
+	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+						/* Print buffer size */
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+						/* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE	/* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE		/* Command auto complete */
+#define CONFIG_CMDLINE_EDITING		/* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/* Serial Driver */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200	/* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* DMA */
+#define CONFIG_APBH_DMA
+
+/* MMC Driver */
+#ifdef	CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_MXS_MMC
+#endif
+
+/* Boot Linux */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	1
+#define CONFIG_BOOTFILE	"uImage"
+#define CONFIG_LOADADDR	0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
+
+/* Environment */
+#define CONFIG_ENV_IS_IN_MMC
+#ifdef CONFIG_ENV_IS_IN_MMC
+ #define CONFIG_ENV_OFFSET	(256 * 1024)
+ #define CONFIG_ENV_SIZE	(16 * 1024)
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+/* Extra Environments */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"update_sd_firmware_filename=u-boot.sd\0" \
+	"update_sd_firmware="		/* Update the SD firmware partition */ \
+		"if mmc rescan ; then "	\
+		"if tftp ${update_sd_firmware_filename} ; then " \
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"setexpr fw_sz ${fw_sz} + 1 ; "	\
+		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
+		"fi ; "	\
+		"fi\0" \
+	"script=boot.scr\0"	\
+	"uimage=uImage\0" \
+	"console=ttyAMA0\0" \
+	"fdt_file=imx23-evk.dtb\0" \
+	"fdt_addr=0x41000000\0" \
+	"boot_fdt=try\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript="  \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; "	\
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
+		"if run loadbootscript; then " \
+			"run bootscript; " \
+		"else " \
+			"if run loaduimage; then " \
+				"run mmcboot; " \
+			"else " \
+				"echo ERR: Fail to boot from MMC; " \
+			"fi; " \
+		"fi; " \
+	"else exit; fi"
+
+#endif /* __MX23EVK_CONFIG_H__ */
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index dd0ef21..71447d9 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -163,7 +163,6 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME	"FEC0"
 #define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_MULTI
 #define CONFIG_MII
 #define CONFIG_FEC_XCV_TYPE	RMII
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index cda4512..d76357c 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -91,7 +91,7 @@
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index f4a082a..1583c11 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -19,11 +19,23 @@
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+
 #include "mx6qsabre_common.h"
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_SYS_MMC_ENV_PART		1	/* Boot partition 1 */
 #endif
 
 #endif                         /* __MX6QSABREAUTO_CONFIG_H */
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index cb99d58..21c76b52 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -158,7 +158,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_ETHPRIME			"FEC0"
 #define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII